80010292 KATHREIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
800 10292Type No. Triple-multiband Panel Dual Polarization Half-power Beam Width Adjust. Electr. Downtilt set by hand or by optional RCU (Remote Control Unit) 936.2691/e Subject to alteration. Input 6 x 7-16 female Connector position Bottom Adjustment 3x, Position bottom mechanism continuously adjustable Weight 36 kg Wind load Frontal: 490 N (at 150 km/h) Lateral: 400 N (at 150 km/h) Rearside: 1090 N (at 150 km/h) Max. wind velocity 200 km/h Packing size 3027 x 304 x 204 mm Height/width/depth 2694 / 262 / 149 mm Mechanical specifications 1710–2180 +45° 806–960 –45° 7-16 7-16 1710–2180 –45° 7-16 806–960 +45° 7-16 1710–2180 –45° 7-16 1710–2180 +45° 7-16 Horizontal Pattern Vertical Pattern 2°–10° electrical downtilt 7.5° dB Horizontal Pattern Vertical Pattern 0°–10° electrical downtilt 66°125° dB +45°/–45° Polarization 7.3° dB +45°/–45° Polarization 1710–2180806–960 XX 65°65° 0°–10° 1710–2180 X 65° 0°–10°2°–10° 806–960 1710–1990 Horizontal Pattern Vertical Pattern 0°–10° electrical downtilt 115° dB 60° +45°/–45° Polarization 6.6° dB 1920 –2180 Frequency range 806 – 866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz Horizontal Pattern: Half-power beam width 69° 68° 66° 65° 64° 60° Front-to-back ratio, copolar > 30 dB > 30 dB > 30 dB > 26 dB > 26 dB > 26 dB Cross polar ratio Typically: Typically: Typically: Typically: Typically: Typically: Maindirection 0° 25 dB 25 dB 25 dB 18 dB 18 dB 18 dB Sector ±60° > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB Vertical Pattern: Electrical tilt 2.5°–9.5°, continuously adjustable 0°–10°, continuously adjustable Impedance 50 Ω 50 Ω 50 Ω 50 Ω 50 Ω 50 Ω Isolation: Intrasystem > 30 dB > 30 dB > 30 dB > 30 dB > 30 dB > 30 dB Isolation: Intersystem > 36 dB (806–960 // 1710–2180 MHz) 11 > 36 dB (1710–2180 // 1710–2180 MHz) Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier) < –150 dBc (2 x 43 dBm carrier) Max. power per input 250 W (at 50 °C ambient temperature) 200 W (at 50 °C ambient temperature) 806–960 1710–2180 1710–2180 65°120° dB 800 10292 Page 1 of 4 Internet: http://www.kathrein.de
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which includes the static mechanical load imposed on an antenna by wind at maximum velocity. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid. 936.2691/e Subject to alteration. Material: Reflector screen: Weather-proof aluminum. Fiberglass housing: It covers totally the internal antenna components. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is light grey. All screws and nuts: Stainless steel. Grounding: The metal parts of the antenna including the mounting kit are DC grounded. The inputs 806–960 MHz and 1710–2180 MHz are also DC grounded. Environmental conditions: Kathrein cellular antennas are designed to operate under the environ- mental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: –55 °C – High temperature (dry): +60 °C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules. The downtilt kit can only be used in combination with the clamps type nos. 738 546, 850 10002, 850 10003. Wall mounting: No additional mounting kit is needed. Accessories (order separately) 738 546 1 clamp Mast: 50 – 115 mm diameter 1.0 kg 2 850 10002 1 clamp Mast: 110 – 220 mm diameter 2.7 kg 2 850 10003 1 clamp Mast: 210 – 380 mm diameter 4.8 kg 2 733 677 1 clamp Mast: 60 – 115 mm diameter 2.0 kg 2 733 678 1 clamp Mast: 115 – 210 mm diameter 2.6 kg 2 733 679 1 clamp Mast: 210 – 380 mm diameter 4.0 kg 2 733 680 1 clamp Mast: 380 – 521 mm diameter 5.3 kg 2 850 10007 1 downtilt kit Downtilt angle: 0° – 8° 5.9 kg 1 Type No. Description Remarks Weight Units per approx. antenna Accessories General Information Page 2 of 4 800 10292 Internet: http://www.kathrein.de 2777 2737 2694 Adjustment mechanism with integrated scale –45° +45° RCU 1710–2180 1710–2180 806–960 bottom system top system Layout of interface 103 180 203 262 Bottom view 45.3 87.8 171 149 106 134 2896
936.2691/e Subject to alteration. 800 10292 Page 3 of 4 Internet: http://www.kathrein.de Remove the protective cap. Set downtilt angle by rotating the adjustment wheel. 0° – max.° max.° – 0° Manual adjustment procedure: General Instructions for Adjustment Mechanism Description of the adjustment mechanism (protective cap removed): ➀ Adjustment wheel with twist-lock function. ➁ Downtilt spindle with integrated scale. ➀ Thread for fixing the protective cap or the RCU (Remote Control Unit). ➁ Gearwheel for RCU power drive. To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gear- wheel must be used for alignment. Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment: For a description of RCU installation please refer to the respective data sheet. Screw on the protective cap again.
936.2691/e Subject to alteration. Page 4 of 4 800 10292 Internet: http://www.kathrein.de Please note: Additional weather sealing of correctly installed feederline connector interfaces is not required, nor is it recommended by the connector manufacturers. General Instructions for Feederline Installation for Triple-band Antennas with Kathrein Installation Set, Type No. 850 10005 Please note: To avoid any damage to the interfaces, please ensure that only suitable tools are used. To tighten the feederline connector interfaces, we strongly recommend using a special Kathrein installation tool (as shown below) in combination with a standard torque-wrench. 4 568 7 9 Description of connector arrangement: Attachment of the feederline connector and RCU (optional): In order to protect the adjustment mechanism the protective caps have to be attached during feederline installation! There are six feederline connectors and three adjustment mechanisms located at the bottom of the antenna. The sequence for installation is: feederline no. 4, 5, 6, 7, 8, 9. Put the connector carefully in place and hand-screw the nut. Use a torque-wrench to finish installation (see installation tool). Repeat operations as shown for each feederline! After feederline installation, the optional remote control units (RCU) can be mounted if required. For a full description of RCU installation please refer to the respective data sheet. Adjustment mechanisms (1 – 3) Feederline connectors (4 – 9) Kathrein installation set: Type No. 850 10005 Set has to be ordered separately! Set consists of two spanners of 27 and 32 mm width. These tools are suitable for 7-16 connectors with a wrench size of 27 or 32 mm. Tighten nut within a torque range of 25 – 33 Nm depending on connector manufacturers’ specifications. 27 or 32 mm 1/2″ square actuation according to DIN 3120 Form C