742215 KATHREIN | Alldatasheet
Document overview
- PDF pages: 3
Technical content
Adjust. Electrical Downtilt set by hand or by optional RCU (Remote Control Unit) 936.3439/a Subject to alteration. Input 2 x 7-16 female Connector position Bottom Adjustment 1x, Position bottom mechanism continuously adjustable Weight 6.2 kg Wind load Frontal: 350 N (at 150 km/h) according to Lateral: 90 N (at 150 km/h) DIN 1055-4 Rearside: 350 N (at 150 km/h) Max. wind velocity 200 km/h Packing size 1595 x 172 x 92 mm Height/width/depth 1314 / 155 / 70 mm Mechanical specifications 1710–2200 X 65° 0°–10° 1710–2200 –45° 1710–2200 +45° 7-16 7-16 Horizontal Pattern Vertical Pattern 0°–10° electrical downtilt 68°127° dB 7.1° dB Horizontal Pattern Vertical Pattern 0°–10° electrical downtilt 66°125° dB 1850 – 1990 MHz: +45°/–45° Polarization 6.8° dB 1710 – 1880 MHz: +45°/–45° Polarization Horizontal Pattern Vertical Pattern 0°–10° electrical downtilt 64°120° dB 1920 – 2200 MHz: +45°/–45° Polarization 6.4° dB 742 215Type No. Frequency range 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2200 MHz Polarization +45°, –45° +45°, –45° +45°, –45° Gain 2 x 17.7 dBi 2 x 17.9 dBi 2 x 18 dBi Horizontal Pattern: Half-power beam width 68° 66° 64° Front-to-back ratio Copolar: > 30 dB Copolar: > 30 dB Copolar: > 30 dB (180° ± 30°) Total power: > 25 dB Total power: > 25 dB Total power: > 25 dB Cross polar ratio Maindirection 0° Typically: 25 dB Typically: 25 dB Typically: 25 dB Sector ±60° > 10 dB > 10 dB > 10 dB Vertical Pattern: Half-power beam width 7.1° 6.8° 6.4° Electrical tilt 0°–10°, continuously adjustable Isolation, between ports > 30 dB Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier) Max. power per input 300 W (at 50 °C ambient temperature) XPol Panel 1710–2200 65° 18dBi 0°–10°T 1710–2200 742 215 Page 1 of 3 Internet: http://www.kathrein.de
936.3439/a Subject to alteration. Material: Reflector screen: Aluminum. Radiator: Tin-plated zinc. Flat fiberglass radome: The max. radome depth is only 70 mm. Fiber- glass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is grey. All screws and nuts: Stainless steel or tin-plated. Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. Environmental conditions: Kathrein cellular antennas are designed to operate under the environ- mental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: –55 °C – High temperature (dry): +60 °C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules. 155 Adjustment mechanism with integrated scale Bottom view ∅ 8.5 –45° +45° 1314 1356 1386For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Accessories (order separately) 734 360 2 clamps Mast: 34 – 60 mm dia. Stainless steel 60 g 1 734 361 2 clamps Mast: 60 – 80 mm dia. Stainless steel 70 g 1 734 362 2 clamps Mast: 80 – 100 mm dia. Stainless steel 80 g 1 734 363 2 clamps Mast: 100 – 120 mm dia. Stainless steel 90 g 1 734 364 2 clamps Mast: 120 – 140 mm dia. Stainless steel 110 g 1 734 365 2 clamps Mast: 45 – 125 mm dia. Stainless steel 80 g 1 738 546 1 clamp Mast: 50 – 115 mm dia. Hot-dip galvanized steel 1.0 kg 2 850 10002 1 clamp Mast: 110 – 220 mm dia. Hot-dip galvanized steel 2.7 kg 2 850 10003 1 clamp Mast: 210 – 380 mm dia. Hot-dip galvanized steel 4.8 kg 2 732 317 1 downtilt kit Downtilt angle: 0° – 10° Stainless steel 1.0 kg 1 Type No. Description Remarks Material Weight Units per approx. antenna Accessories General Information Page 2 of 3 742 215 Internet: http://www.kathrein.de Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which includes the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid.
936.3439/a Subject to alteration. 742 215 Page 3 of 3 Internet: http://www.kathrein.de General Instructions for Adjustment Mechanism Remove the protective cap. Set downtilt angle by rotating the adjustment wheel. 0° – max.° max.° – 0° Manual adjustment procedure: Description of the adjustment mechanism (protective cap removed): ➀ Adjustment wheel with twist-lock function. ➁ Downtilt spindle with integrated scale. ➀ Thread for fixing the protective cap or the RCU (Remote Control Unit). ➁ Gearwheel for RCU power drive. To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gear- wheel must be used for alignment. Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment: For a description of RCU installation please refer to the respective data sheet. Screw on the protective cap again.