7235 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • Current rating 7.4-400 amps
  • High reliability: does not switch overload current
  • Adaptable for AC, DC, single-phase or three-phase applications
  • Stops nuisance trips: thermal element unaffected by transient current surges
  • Can be mounted in a remote location
  • Uses minimum space: small circuit breaker for size of electrical load
  • Only faulted line circuits opened: coordination ratings insures that branch of circuit breakers trip first under fault conditions
  • Typical use: remote sensing systems SPECIFICATIONS Vibration 1.52mm (0.06”) total excursion, 10-55 cps Mechanical Schock 25G Acceleration 10G Explosion Proof 3 cycles at 100 amps Resistance Corrosion: 15 hours (QQ-M-151A) Sand and dust: 4 hours Short Circuit Rupture Relay capacity: 5 cycles, 20 VDC, 40,000 ft. alt. Amp Rating 7-50 amps: 2,000 amp adjusted circuit Over 50 amps: 4,000 amp adjusted circuit Page 1 www.sensata.comCopyright © 2018 Sensata Technologies, Inc.

Rev:10/05/18 www.sensata.com Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 (508)-236-3287 klixon@sensata.com AUTHORIZED DISTRIBUTORS Flame Enterprises Bob Correa, Director of Product Management +1 (240) 236-9802 bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818- 700-2905 Fax: 1-818-407-5080 Peerless Electronics Steve Gunther, National Sales Manager +1 (516) 594-3509 sgunther@peerlesselectronics. com nysales@peerlesselectronics. com | Web Tel: 1-800-285-2121 Fax: 1-800-222-8096 Europe, Middle East & Africa Flame Enterprises Bob Correa, Director of Product Management +1 (240) 236-9802 bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818- 700-2905 Fax: 1-818-407-5080 CONTACT US 7235-1 7235-2 7236-1 7236-2 Rating (in amps) 7-125 7-125 150-400 150-400 (S1-S³) Resistance R¹ 0.75 ohm None 0.75 ofm None Continuous Current Capacity (S1-S³) 3 amps 10 amps 3amps 10amps (S1-S³) Contact Rating 10 amps 10 amps 10 amps 10 amps DIMENSIONS SPLIT LOCKWASHER (2 PLACES) INCHES [MM] 0.312 [7.93] WITH COVER SCREWDRIVER HOLES 6-32 UNC-2A FILLISTER HD SCREW, 3.625 [92.08] 3.125 [79.38] 8-32 UNC-2A x .313 RD HD SCREW, LOCKWASHER AND WASHER, (3 PLACES) 1.375 [34.93] MOUNTING HOLE WITHOUT COVER .890 [22.61] .515 [13.08] .750 [19.05] .125 [3.18] #8-32 UNC-2A x 1/2 RD HEAD SCREW, LOCKWASHER AND WASHER (FOR 7, 10, 12,

15 AMP RATINGS)

(ADDITIONAL TERMINAL CONFIGURATIONS EXIST) .500 [12.70] .828 [21.03] 1.875 [47.63] 2.328 [59.13] .046 [1.17]