09_9749_30_03 BINDER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Illustration Conductor layout Scale drawing Contact arrangement (Plug-in side) You can find the component part drawing and assembly instructions on the next page. Technical data General features Part no. 09 9749 30 03 Connector design Male panel mount connector Version Connector pin straight Connector locking system snap-in Product data sheet Subminiature connectors Product description Snap-In Male panel mount connector, Contacts: 3, unshielded, solder, IP40 Area series 719 Part no. 09 9749 30 03 Date: 05.09.2025
Connection cross-section 0.25 mm² / AWG 24 Temperature range from/to -25 °C / 70 °C Mechanical operation > 100 Mating cycles Weight (g) 1.14 Customs tariff number 85369010 Country of Origin DE Electrical parameters Rated voltage 60 V Rated impulse voltage 800 V Rated current 3,0 A Insulation resistance ≥ 10 Ω10 Pollution degree 1 Overvoltage category II Insulating material group III EMC compliance unshielded Material Housing material PA Contact body material PA Contact material CuZn (brass) Contact plating Au (gold) REACH SVHC CAS 7439-92-1 (Lead) SCIP number 666bc193-9b36-430c-875d-8aee4ef76b34 Classifications eCl@ss 11.1 27-44-01-09 ETIM 9.0 EC003569 Product data sheet Subminiature connectors Product description Snap-In Male panel mount connector, Contacts: 3, unshielded, solder, IP40 Area series 719 Part no. 09 9749 30 03 Date: 05.09.2025
Assembly instructions / Panel cut-out Component part drawing Product data sheet Subminiature connectors Product description Snap-In Male panel mount connector, Contacts: 3, unshielded, solder, IP40 Area series 719 Part no. 09 9749 30 03 Date: 05.09.2025
The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected. Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information". Product data sheet Subminiature connectors Product description Snap-In Male panel mount connector, Contacts: 3, unshielded, solder, IP40 Area series 719 Part no. 09 9749 30 03 Date: 05.09.2025