7135LB

7135LB ARISTA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

7135LB Series Layer 1+ FPGA Switch Data Sheet Product Highlights Performance

• 7135LB: 48 x SFP28, 4 x QSFP28
• 5 ns - Layer 1 Latency at 25G
• Non blocking
• Nanosecond level L1 forwarding
• Xilinx Virtex® UltraScale+™ FPGA
• Deterministic forwarding Advanced L1 functionality
• Signal regeneration
• Media conversion
• Port mirroring
• Telemetry
• Dynamic patching/link management Core Features
• Ports capable of 100M-25Gbps
• Full signal recovery & regeneration
• Bit for bit forwarding for any protocol
• Integrated FPGA for applications Ultra Low Latency
• Deterministic ultra low latency
• Less than 100 ps jitter
• Same latency for 1:N port mirroring
• Completely non-blocking Redundancy & Data Center Optimized
• Dual redundant, hot swappable PSU
• Dual redundant, hot swappable fans
• AC & DC power options
• Rear to front or front to rear cooling
• Tool-less rails for simple installation Monitoring
• Embedded influxdb database
• Eye diagram for monitoring/ troubleshooting
• LLDP for discovering network topology
• Full SFP28 interface diagnostics including light levels, temperature & voltage Management platform
• Linux based
• Industry standard CLI
• JSON RPC API for remote management
• Flexible Time Synchronization with PTP , NTP , PPS Overview Exchanges and traders today tend to do everything possible to shave every nanosecond of latency from the network. FPGA-based applications and Layer 1 X- Point connectivity provide blazing fast data distribution, critical to achieving the lowest possible latency. With increasing volatility and market data volume spiking bursts of tra ffic, upgrading the speed of the network infrastructure becomes an obvious choice to adapt to rapidly changing market events. The lack of higher speed infrastructure in ultra low latency networks has inhibited HFT venues from performing network upgrades. The Arista 7135LB Series FPGA-enabled devices leverage FPGA technology and a 25G crosspoint matrix switch to enable the development and deployment of cutting-edge network applications. With 48 SFP28 ports and 4 QSFP28 ports, the platform supports the next generation of 25G+ ultra low latency applications, featuring a Xilinx UltraScale+ FPGA. The 7135LB adds a Layer 1 crosspoint fabric between the FPGA and front-panel, supporting 25G replication at only 5ns. The Xilinx UltraScale+ FPGA allows customers to run either the applications developed by Arista, or to develop their own custom applications. On top of market-leading FPGA functionality, 7135LB Series combines a range of Layer 1+ network functionality such as signal regeneration, port mirroring, dynamic patching/link management, ad-hoc tapping without rewiring, and media conversion telemetry and more, all in one device. Arista 7135LB Series Feature Benefits Simplified stack Fan-out with 5 ns of latency, equivalent to a single meter of fiber or copper interconnect and insignificant jitter. Media conversion Reduces costs by converting between different media types running at the same rate Layer 1+ functionality Save rack space and reduce complexity by leveraging dynamic patching, tapping, one-to-many replication, telemetry and comprehensive port statistics on a single device. Feature rich Avoid the need to build features in-house by leveraging Arista’s access control, syslog, SNMP , packet stats, tcpdump, JSON RPC API, time series data, streaming telemetry and more - included as standard within the 7135 Series. Easy app deployment Streamline operational processes through Arista’s built-in application infrastructure which allows developers to wrap applications into simple packages for deployment. Enterprise ready Deploy FPGA applications with ease - the FPGA platform integrates with a 64-bit x86 management processor and the MOS and/or EOS Operating systems to provide user extensible solutions.

7135LB Series | Applications Arista EOS All Arista products including the 7135LB Series run the same Arista EOS software, simplifying network administration with a single standard across all switches. Arista EOS is a modular switch operating system with a unique state sharing architecture that cleanly separates switch state from protocol processing and application logic. Built on top of a standard Linux kernel, all EOS processes run in their own protected memory space and exchange state through an in-memory database. This state sharing architecture provides the foundation for self-healing resiliency and enables straightforward third-party development and application integration. Arista EOS enables advanced monitoring and automation capabilities such as Zero Touch Provisioning, LANZ, and Linux based tools to be run natively on the switch. Arista CloudVision provides a network-wide approach for workload orchestration, work flow automation and real-time telemetry enabling companies to manage the network with much fewer human resources. Rapid integration with a wide range of third-party applications for virtualization, management, automation and orchestration services are equally available. Platform Architecture The Xilinx UltraScale+ VU9P-3 FPGA is connected to 48 x SFP28 and 4 x QSFP28 front panel ports through a CLOS network using a series of 16x16 X-Point switches, providing much lower latency and port scaling. The platform supports existing Arista applications such as Low Latency Mux or High Precision Timestamping, while allowing the FPGA to be also utilized by the customers for their custom applications. The FPGA also has three direct connections to the CPU card and four direct connections to 8GB DDR4 memory. Arista 7135LB-48Y4C System Architecture

Arista offers several powerful network applications to transform network infrastructure. These applications enable a complete lifecycle of networking functions, such as packet replication, multiplexing, filtering, timestamping, Layer 2 switching, aggregation and capture. Arista also provides FPGA development kits as well as IP cores to enable organizations to develop and deploy their your own custom applications. Application Overview Key Features Use it for... MetaWatch Advanced network monitoring

• Regenerative Tapping
• Large scale, lossless tap aggregation
• Multi-port data capture
• Sub-nanosecond precise time stamping
• Deep buffering (32 GB)
• In-depth network monitoring and visibility
• Improved network reliability & troubleshooting problems
• Market data & packet capture
• Accurate latency measurement & monitoring
• Regulatory compliance (MiFID II/RTS 25) MetaMux Low-latency multiplexing
• Data aggregation in 39 nanoseconds
• Deterministic jitter
• Packet statistics
• BGP & PIM support
• Ultra-low latency network connectivity for trading
• Market data fan-out and data aggregation for order entry at nanosecond levels MultiAccess Connection sharing with enhanced security
• Low-latency multiplexing and security from 55 nanoseconds
• ACL-based configurable filtering
• Easy to deploy data privacy for connection sharing
• Simplified footprint for both mux and filtering applications
• Secure network connection sharing
• Providing sponsored access to multiple clients
• Multi tenant exchange access
• Low latency interconnect sharing
• Supporting Colo deployments with multiple concurrent exchange connections SwitchApp Low latency Layer 2 /Layer 3 switching
• 10/25/40G Layer 2 switching, implemented in FPGA
• Ultra-low latency packet forwarding in 89 -150 ns
• Full featured L2/L3 switching pipeline powered by EOS
• Non-blocking bandwidth profiles to provide up to 480 Gbps for 10G and 600Gbps for 25G
• Exchange-facing connectivity
• L2/L3 Multicast pub/sub
• Supporting Colo deployments with multiple concurrent connections
• Optimised distribution of traffic
• Low latency back-office or message bus infrastructure 7135LB Series | Applications Application Comparison for Arista 7135LB Series

7135LB Series | Applications Enabling Custom Applications While FPGA applications can be challenging to develop, the Arista 7135LB makes them easy to deploy. Arista provides a built-in application framework allowing developers to wrap applications into simple packages for deployment, streamlining operational processes. Arista development toolkits enable complete and unfettered access to the facilities provided by the in-system FPGAs. These are the same APIs and developer kits used by the Arista engineering team to develop and deploy our applications. Application Overview Key Features Use it for... MetaWatch Inline* (formerly ExchangeApp) In-line packet time- stamping enabling exchange fairness

• Timestamp at the edge of trading venue networks
• Sub-200ns passthrough latency to apply the timestamp
• Reliable accuracy and timestamp precision
• Accurately synchronise timestamps between multiple MetaWatch Inline devices
• Increase exchange fairness
• Reduce trading venue latency sensitivity
• Maintain trade order based on edge timestamps
• Reduce complexity and risk of traditional low- latency exchange infrastructures MetaProtect* Firewall Low-latency packet filtering in 135 ns
• Architected for ultra-low-latency with forwarding from 135 nanoseconds
• Line rate 10GbE packet uni or bidirectional filtering between port-pairs
• Stateless security policy with up to 510 rules per ACL
• Full packet header logging for noncompliant traffic
• Low-latency firewall
• Satisfy InfoSec or regulatory compliance mandates without introducing excessive latency * Not currently supported in EOS

7135LB Series | Technical Specifications Specifications Switch Model 7135LB-48Y4C Front-Panel Ports 48x SFP28, 4x QSFP28 Layer 1 Throughput 100M-25.8 Gbps per lane Layer 1 Latency From 5ns FPGA 1x Xilinx® UltraScale+™ VU9P-3 FPGA DRAM 4 x 8GB DDR4 FPGA Development Kit (FDK) Yes Vitis™ Development Kit (VDK) Yes1 Clock OCXO CPU 8-core x86 System DRAM / SSD 32 GB / 120 GB RS-232 Serial Ports 1 (RJ-45) USB Ports 1 100/1000 Management Ports 1 PPS Input Ports (5V TTL, 50Ω or Hi-Z) 1 PPS Output Ports (5V TTL)1 1 Hot-swap Power Supplies 2 (1+1 redundant) Hot-swappable Fans 3 (N+1 redundant) Reversible Airflow Option Yes Typical/Max Power Draw 2 667W/1000W Rack Units 1 U Size (WxHxD) 17.3 x 1.7 x 22.4 inches (44.0 x 4.4 x 56.9 cm) Weight 26.8 lbs (12.2 kg) Fan Tray FAN-7011H Power Supplies PWR-1511-AC or PWR-1511-DC or PWR-1512-AC EOS Feature Licenses Group 3 Minimum EOS TBD 1. Not currently supported in EOS 2. Typical power draw depends on FPGA application configuration

7135LB Series | Physical Characteristics Standards Compliance EMC FCC Class A, ICES-003, EN 55032, EN IEC 61000-3-2:2019, EN 61000-3-3 Immunity EN 55035 EN 300 386 Safety EN 62368-1:2014 + A11:2017 IEC-62368-1:2014 Certifications BSMI (Taiwan) CE (European Union) KCC (South Korea) NRTL (North America) RCM (Australia/New Zealand) UKCA (United Kingdom) VCCI (Japan) European Union Directives 2014/53/EU Radio Equipment Directive 2014/35/EU Low Voltage Directive 2014/30/EU EMC Directive 2012/19/EU WEEE Directive 2011/65/EU RoHS Directive 2015/863/EU Commission Delegated Directive Further Information Product Certification Portal Environmental Characteristics Operating Temperature 1 0 to 40˚C (32 to 104˚F) Relative Humidity 10% to 85% non-condensing Maximum Altitude 2,000m (6,500ft) Power Supply Specifications Power Supply PWR-1511-AC PWR-1511-DC PWR-1512-AC Input Voltage 200-240V AC -48 to -60V DC 200-240V AC Typical Input Current 9.6A 35.2A Max (-48V) 9.6A Input Frequency 50/60Hz DC 50/60Hz Output Power 1500W 1500W 1500W Input Connector IEC 320-C13 IEC 60320 C14 IEC 320-C13 Efficiency (Typical) 93% Platinum 92% 93% Platinum 1. Certain airflow configurations or the use of higher power or reduced temperature range optics may reduce maximum operating temperature.

7135LB Series | Optics and Cables Arista Optics and Cables The 7135LB Series accepts a wide range of QSFP and SFP optics and cables. The QSFP ports of the 7135LB Series accept QSFP optics and cables configured at 100GE, 4x 25GE, 40GE and 4x 10GE speeds, while the SFP28 ports accept SFP optics and cables con figured at 25GE and 10GE speeds. More information about Arista optics and cables can be found here. Arista’s Enhanced Performance (E-Series) QSFP and SFP optical transceivers, such as the QSFP-100G-SR4-E, SFP-25G-SR-E and SFP-25G- LR-E enable 100G and 25GE operation without requiring FEC, eliminating the FEC delay usually present in 100GE and 25GE optical links. Apart from Arista’s E-Series optical transceivers, 100GBASE-LR4 and certain copper cables, all 100GE and 25GE links require FEC, while all 10GE and lower data rates do not use FEC. The table below summarizes the most commonly used optics and cables in the 7135LB platforms. For more details about Arista’s pluggable optics and cables, refer to the Optics Modules and Cables Data sheet, the Arista Transceiver and Cable Guide, and Arista’s Enhanced Performance Series Optics Q&A. Supported 100G QSFP Optics and Cables Application / Interface Type Supported Optics and Cables Description and Reach 100GBASE-CR4 CAB-Q-Q-100G-xM QSFP to QSFP Copper Cables: 1m to 5m 4x 25GBASE-CR CAB-Q-4S-100G-xM QSFP to 4x SFP Breakout Copper Cables: 1m to 5m QSFP port configured for 4x 25GE, SFP breakout ports configured for 25GE CAB-Q-Q-100G-xM QSFP to QSFP Copper Cables: 1m to 5m QSFP ports configured for 4x 25GE 100GBASE-AOC AOC-Q-Q-100G-xM 100G QSFP to QSFP Active Optical Cables: 1m to 30m 100GBASE-SR4-E QSFP-100G-SR4-E (E-Series Transceiver for low latency) 30m OM3 / 50m OM4 Parallel MMF without FEC (for low latency), or 70m OM3 / 100m OM4 Parallel MMF with FEC 4x 25GBASE-SR-E QSFP-100G-SR4-E (E-Series Transceiver for low latency) QSFP-100G-SR4-E Transceiver configured as 4x 25GE 30m OM3 / 50m OM4 Parallel MMF without FEC (for low latency), or 70m OM3 / 100m OM4 Parallel MMF with FEC 100GBASE-SR4 QSFP-100G-SR4 70m OM3 / 100m OM4 Parallel MMF 4x 25GBASE-SR QSFP-100G-SR4 QSFP-100G-SR4 Transceiver configured as 4x 25GE 70m OM3 / 100m OM4 Parallel MMF 100GBASE-SRBD / SWDM4 QSFP-100G-SRBD / SWDM4 70m OM3 / 100m OM4 duplexMMF 100GBASE-PSM4 / PLRL4 QSFP-100G-PSM4 / PLRL4 500m / 2km over Parallel MMF 4x 25GBASE-LR QSFP-100G-PSM4 / PLRL4 QSFP-100G-PSM4 / PLRL4 Transceiver configured as 4x 25GE 500m / 2km over Parallel MMF 100GBASE-LR4 QSFP-100G-LR4 10km over duplex SMF without FEC 100GBASE-LRL4 QSFP-100G-LRL4 2km over duplex SMF 100GBASE-CWDM4 / XCWDM4 QSFP-100G-CWDM4 / XCWDM4 2km / 10km over duplex SMF 100GBASE-DR / FR / LR QSFP-100G-DR / FR / LR 500m / 2km / 10km over duplex SMF

7135LB Series | Optics and Cables Supported 40G QSFP Optics and Cables Application / Interface Type Supported Optics and Cables Description and Reach 40GBASE-CR4 CAB-Q-Q-xM QSFP to QSFP Copper Cables: 0.5m to 5m 4x 10GBASE-CR CAB-Q-S-xM QSFP to 4x SFP Breakout Copper Cables: 0.5m to 5m QSFP port configured for 4x 10GE SFP breakout ports configured for 10GE CAB-Q-Q-xM QSFP to QSFP Copper Cables: 1m to 5m QSFP ports configured for 4x 10GE 40GBASE-AOC AOC-Q-Q-40G-xM 100G QSFP to QSFP Active Optical Cables: 3m to 100m 40GBASE-SR4 QSFP-40G-SR4 100m OM3 / 150m OM4 Parallel MMF 4x 10GBASE-SR QSFP-40G-SR4 QSFP-40G-SR4 Transceiver configured as 4x 105GE 100m OM3 / 150m OM4 Parallel MMF 40GBASE-SRBD QSFP-40G-SRBD 100m OM3 / 150m OM4 duplex MMF 40GBASE-UNIV QSFP-40G-UNIV 100m OM3 / 150m OM4 duplex MMF or 500m duplex SMF 40GBASE-PLR4 / PLRL4 QSFP-40G-PLR4 / PLRL4 10km / 1km over Parallel MMF 4x 10GBASE-LR QSFP-40G-PLR4 / PLRL4 QSFP-40-PLR4 / PLRL4 Transceiver configured as 4x 10GE 10km / 1km over Parallel MMF 40GBASE-LR4 / LRL4 QSFP-40G-LR4 / LRL4 10km / 1km over duplex SMF Supported 25G SFP Optics and Cables Application / Interface Type Supported Optics and Cables Description and Reach 25GBASE-CR CAB-S-S-25G-xM SFP to SFP Copper Cables: 1m to 5m 25GBASE-AOC AOC-S-S-25G-xM 25G SFP to SFP Active Optical Cables: 3m to 30m 25GBASE-SR-E SFP-25G-SR-E (E-Series Transceiver for low latency) 30m OM3 / 50m OM4 duplex MMF without FEC (for low latency), or 70m OM3 / 100m OM4 duplex MMF with FEC 25GBASE-SR SFP-25G-SR / SFP-25G-MR-SR 70m OM3 / 100m OM4 duplex MMF 25GBASE-XSR SFP-25G-MR-XSR 200m OM3 / 300 OM4 duplex MMF 25GBASE-LR-E SFP-25G-LR-E (E-Series Transceiver for low latency) 2km duplex SMF without FEC (for low latency), or 10km duplex SMF with FEC 25GBASE-LR SFP-25G-LR / SFP-25G-MR-LR 10km duplex SMF with FEC Supported 10G Optics and Cables Application / Interface Type Supported Optics and Cables Description and Reach 10GBASE-CR CAB-SFP-SFP-xM SFP to SFP Copper Cables: 0.5m to 5m 10GBASE-AOC AOC-S-S-10G-xM 10 SFP to SFP Active Optical Cables: 3m to 30m 10GBASE-SR SFP-10G-SR 300m OM3 / 400m OM4 duplex MMF 10GBASE-SRL SFP-10G-SRL 100m OM3 / 150m OM4 duplex MMF 10GBASE-LR / LRL SFP-10G-LR / LRL 10km / 1km duplex SMF 10GBASE-T SFP-10G-T 30m Cat6a copper cable

7135LB Series | Ordering Information Product Number Product Description DCS-7135LB-48Y4C# Arista 7135 Series with 48 SFP28, 4 QSFP28, Layer 1 X-point, VU9P-3 FPGA, configurable fans & psu DCS-7135LB-48Y4C-F Arista 7135 Series with 48 SFP28, 4 QSFP28, Layer 1 X-point, VU9P-3 FPGA, front-to-rear air, 2xAC DCS-7135LB-48Y4C-R Arista 7135 Series with 48 SFP28, 4 QSFP28, Layer 1 X-point, VU9P-3 FPGA, rear-to-front air, 2xAC FAN-7011H-F Spare fan module for Arista 7000 Series 1RU High Speed Fan (front-to-rear airflow) FAN-7011H-F# Configurable fan module for Arista 7000 Series 1RU High Speed Fan (front-to-rear airflow) FAN-7011H-R Spare fan module for Arista 7000 Series 1RU High Speed Fan (rear-to-front airflow) FAN-7011H-R# Configurable fan module for Arista 7000 Series 1RU High Speed Fan (rear-to-front airflow) PWR-1511-AC-RED Arista PSU, 1RU, AC, 1500W, FORWARD, 73.5MM PWR-1511-AC-RED# Configurable PSU, 1RU, AC, 1500W, FORWARD, 73.5MM PWR-1511-AC-BLUE Arista PSU, 1RU, AC, 1500W, REVERSE, 73.5MM PWR-1511-AC-BLUE# Configurable PSU, 1RU, AC, 1500W, REVERSE, 73.5MM PWR-1512-AC-RED Arista PSU, 1RU, AC, 1500W, FORWARD, 73.5MM PWR-1512-AC-RED# Configurable PSU, 1RU, AC, 1500W, FORWARD, 73.5MM PWR-1512-AC-BLUE Arista PSU, 1RU, AC, 1500W, REVERSE, 73.5MM PWR-1512-AC-BLUE# Configurable PSU, 1RU, AC, 1500W, REVERSE, 73.5MM PWR-1511-DC-RED Arista PSU, 1RU, DC, 1500W, FORWARD, 73.5MM PWR-1511-DC-RED# Configurable PSU, 1RU, DC, 1500W, FORWARD, 73.5MM PWR-1511-DC-BLUE Arista PSU, 1RU, DC, 1500W, REVERSE, 73.5MM PWR-1511-DC-BLUE# Configurable PSU, 1RU, DC, 1500W, REVERSE, 73.5MM

7135LB Series | Contact Information Warranty The Arista 7135LB series switches come with a one-year limited hardware warranty, which covers parts, repair, or replacement with a 10 business day turn-around after the unit is received. Service and Support Support services including next business day and 4-hour advance hardware replacement are available. For service depot locations, please see: http://www.arista.com/en/service Headquarters

5453 Great America Parkway

Santa Clara, California 95054 408-547-5500 Support support@arista.com 408-547-5502 866-476-0000 Sales sales@arista.com 408-547-5501 866-497-0000 Copyright 2024 Arista Networks, Inc. The information contained herein is subject to change without notice. Arista, the Arista logo and EOS are trademarks of Arista Networks. Other product or service names may be trademarks or service marks of others. www.arista.com Aug 12th, 2024 04-0051-03 Data Sheet