7105J1ZQE2

7201J1ZQE CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 22

Technical content

G–4 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

7000 Series

Miniature Rocker & Lever Handle Switches Models Available Features/Benefits

• Multi-pole and multi-position
• Wide variety of actuator and termination options
• Epoxy terminal-seal compatible with bottom wash cleaning
• RoHS compliant Typical Applications
• Telecommunications
• Instrumentation
• Medical equipment Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page H-21 for additional ratings. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break cycles at full load. All other models: 40,000 cycles. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with S, P , R, Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Nylon, black. FRAME (FRONT MOUNT): Nylon, black. FRAME (REAR MOUNT): Spring steel, black. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page G-21 for additional contact materials. CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page G-21 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data Section HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless steel. Standoff: Nylon standard. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-5 through G-25 . For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function

7101 SP On-None-On

7103 SP On-Off-On

7105 SP Mom.-Off-Mom. 7107 SP On-Off-Mom. 7108 SP On-None-Mom. 7109 SP None-On-Mom.

7201 DP On-None-On

7203 DP On-Off-On

7205 DP Mom.-Off-Mom. 7207 DP On-Off-Mom. 7208 DP On-None-Mom.

7211 DP On-On-On

7213 DP On-On-Mom. 7215 DP Mom.-On-Mom. 7301 3P On-None-On 7303 3P On-Off-On 7401 4P On-None-On 7405 4P Mom.-Off-Mom. 7411 4P On-On-On Note: UL/CSA models available, see pages H-5 and H-6. Actuator J1 .531 long rocker J2 Lever J3 .906" long rocker J8 .699" long rocker J10 1.318" long rocker J11 Rocker with frame J15 Rocker, snap-in J16 Rocker with frame, snap-in J19 Rocker with frame J21 Lever with frame J25 Lever, snap-in J26 Lever with frame, snap-in J37 Rocker with frame J50 Rocker J51 Rocker with frame J52 Rocker with frame for LED, snap-in J60 Lever J61 Lever with frame, snap-in J62 Lever with frame for LED, snap-in J90 Lever J91 Lever with frame, snap-in Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole AW3 Right angle, extended, PC thru-hole V2 .555" high, V-bracket V3 .460" high, V-bracket V4 .630" high, V-bracket V5 Vertical right angle, PC thru-hole V6 .460" high, V-bracket V7 .630" high, V-bracket V8 .953" high, V-bracket V9 1.150" high, V-bracket V31 .460" high, V-bracket, snap-in V51 Vertical right angle, snap-in V61 .460" high, V-bracket, snap-in W .750" long, wire wrap W3 .425" long, wire wrap W5 1.305" long,wire wrap Z3 Quick connect Seal E Epoxy I Epoxy potted base Actuator Color

2 Black

1 White

3 Red

NONE No frame color required (J11, J19, J21 & J37 Actuators) P Gold, matte tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin

G–5 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Miniature Rocker & Lever Handle Switches SWITCH FUNCTION DPDT 2-1,5-4 N/A OPEN N/A 2-3,5-4 2-3,5-6 ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. ON ON ON ON ON MOM. MOM. ON MOM. U21 U23 U25 U27 U28 U211* U213* U215* 7201 7203 7205 7207 7208 7211* 7213* 7215* DP SPDT 2-1 2-1 N/A OPEN N/A 2-3 2-3 N/A ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. NONE ON MOM. U11 U13 U15 U17 U18 U19 7101 7103 7105 7107 7108 7109 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 UL/CSA** MODEL NO.MODEL NO. NO. POLES C&K marking on opposite sideC&K marking on opposite side Terminal Nos. For Reference Only Terminal Nos. For Reference Only DPDT SPDT Part number shown: 7101J1ZQE2 Part number shown: 7201J1ZQE2 * Wiring for 3-way switch, see Section N.MOM. = Momentary ** U11 through U413 model nos. with all options when ordered with G, Q, R or S contact material.

Miniature Rocker & Lever Handle Switches SWITCH FUNCTION C&K marking on opposite sideC&K marking on opposite side * Wiring for 3-way switch: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. MOM. = Momentary ** U11 through U411 model nos. with all options when ordered with G, Q, R or S contact material. 7301 7303 U31 U33 ON NONE ON ON OFF ON 7401 7405 7411* U41 U45 U411* ON NONE ON MOM. OFF MOM. ON ON ON 2-3,5-6,8-9,11-12 N/A OPEN 2-3,5-4,8-9,11-10 2-1,5-4,8-7,11-10 4PDT 2-3,5-6,8-9 N/A OPEN 2-1,5-4,8-7 3PDT NO. POLES MODEL NO. UL/CSA** MODEL NO. SWITCH FUNCTION POS. 1 POS. 2 POS. 3 CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SCHEMATIC Part number shown: 7301J1ZQE2 3PDT Terminal Nos. For Reference Only 4PDT Terminal Nos. For Reference Only Part number shown: 7401J1ZQE2 G–6 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches ACTUATOR–PANEL REAR MOUNT DIMPLES MFG. OPTION DIMPLES MFG. OPTION PANEL MOUNTING J8 Actuator J3 Actuator J10 Actuator J1 & J2 Actuators Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on all switches with panel mounting brackets. Actuators available separately, see page G-22. Hardware is available see Technical Data section of this catalog. J1, J2, J3, J8 & J10 Actuators available with C, W-W5, Z or Z3 terminations. J1 ROCKER J2 LEVER J3 ROCKER J8 ROCKER J10 ROCKER ACTUATOR COLOR ACTUATOR G Rocker G–7 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Rocker & Lever Handle Switches ACTUATOR–SNAP-IN FRONT MOUNT PANEL MOUNTING J50 Actuator J15, J16, J25 & J26 Actuators J15 ROCKER, SNAP-IN J16 ROCKER WITH FRAME, SNAP-IN J25 LEVER, SNAP-IN J26 LEVER WITH FRAME, SNAP-IN J50 ROCKER, SNAP-IN Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-22 and G-25. J15, J16, J25, J26, J50 & J51 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. * For J50: Increase this dimension to .620/.625 No frame color choice required No frame color choice required No frame color choice required (J15 or J25options) G–8 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches ACTUATOR–SNAP-IN FRONT MOUNT PANEL MOUNTING J51, J60 & J61 Actuators J52 Actuator J51 ROCKER WITH FRAME, SNAP-IN J52 ROCKER WITH FRAME FOR LED, SNAP-IN J60 LEVER, SNAP-IN J61 LEVER WITH FRAME, SNAP-IN Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-22 and G-25. J51, J52, J60 & J61 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. For J51, J52: Increase this dimension to .620/.625 No frame color choice required LED not included. For LED information, see page H-24. (J15 or J25 options) G–9 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

G–10 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker Miniature Rocker & Lever Handle Switches ACTUATOR–SNAP-IN FRONT MOUNT PANEL MOUNTING J90, J91 & J93 Actuators J62 Actuator J62 LEVER WITH FRAME FOR LED, SNAP-IN J90 LEVER, SNAP-IN J91 LEVER WITH FRAME, SNAP-IN Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-22 and G-25. J62, J90 & J91 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z & Z3 terminations. * For J90: Increase this dimension to .620/.625 For J91: Increase this dimension to .620/.625 (J90 options) No frame color choice required. LED not included. For LED information, see page H-25. ACTUATOR COLOR FRAME COLORACTUATOR

Miniature Rocker & Lever Handle Switches ACTUATOR–REAR MOUNT .313 (7,95) PANEL MOUNTING J11 & J21 Actuators J19 Actuator J37 Actuator J11 ROCKER WITH FRAME J19 ROCKER WITH FRAME J21 LEVER WITH FRAME J37 ROCKER WITH FRAME Actuator finish: Matte. Frame finish: Gloss. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-22 and G-25. J11, J19, J21 & J37 Actuators available with C, W-W5, Z & Z3 terminations. G–11 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

ACTUATOR–PC MOUNT J1 ROCKER J2 LEVER J3 ROCKER J8 ROCKER J50 ROCKER Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. Actuators available separately, see page G-22. J1, J2 & J8 actuators available with A, A3, AV2, AV3, AW3 & V2 terminations. J3 actuators available with AV2, AV3 & V2-V61 terminations. J50 actuators available with A (DP , 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. Miniature Rocker & Lever Handle Switches G–12 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches ACTUATOR–PC MOUNT TERMINATIONS PC MOUNTING Dim 'A' SPDT thru 4PDT SPDT thru 4PDT Z3 QUICK CONNECT W, W3, W5 WIRE WRAP SPDT thru 4PDT Not available with P, R or S contact materials. Available actuators, see pages G-7 through G-13. Not available with P , R or S contact materials. Available actuators, see pages G-7 through G-13. Mating quick connector available; order part number 530100000, page G-23. NOTE: Available actuators, see pages G-7 through G-13. NOTE: Available actuators, see pages G-7 through G-13. Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. Actuators available separately, see page G-22. J60 & J90 actuators available with A (DP, 3P models only), A3 (DP , 3P models only), AV2, AV3, AW3 (DP , 3P models only) & V2-V61 terminations. SPDT thru 4PDT Z SOLDER LUG C PC THRU-HOLE J90 LEVER J60 LEVER ACTUATOR COLOR ACTUATOR W .750 (19,05) W3 .425 (10,80) W5 1.305 (33,15) DIM ‘A’ OPTION CODE G Rocker G–13 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Rocker & Lever Handle Switches TERMINATIONS PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A Actuator Shown In Pos. 1 SECTION A-A .14 (3,6) PC MOUNTING A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW3 RIGHT ANGLE, EXTENDED, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg. Not available with I seal option. A vailable actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. 7101J1ABE2 Horizontal Actuation SPDT 7201J1ABE2 Horizontal Actuation DPDT G–14 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH A RIGHT ANGLE, PC THRU-HOLE Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. 7301J1ABE2 Horizontal Actuation 3PDT 7101J1AV2BE2 Vertical Actuation SPDT G Rocker G–15 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Rocker & Lever Handle Switches TERMINATIONS Actuator Shown In Pos. 1 SECTION A-A Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING PC MOUNTING AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7201J1AV2BE2 Vertical Actuation DPDT 7301J1AV2BE2 Vertical Actuation 3PDT Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. G–16 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A V51 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. 7401J1AV2BE2 Vertical Actuation 4PDT 7101J1V5BE2 Vertical Actuation SPDT G Rocker G–17 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Rocker & Lever Handle Switches TERMINATIONS Actuator Shown In Pos. 1 PC MOUNTING PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET V51 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Not available with I seal option. Available actuators, see pages G-7 and G-13. 7101J1__BE2 SPDT 7201J1V5BE2 Vertical Actuation DPDT V2, V21 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’ OPTION CODE G–18 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING V2, V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN V2, V7, V8 VERTICAL MOUNT, V-BRACKET V21, V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET Not available with I seal option. Available actuators, see pages G-7 and G-13. Not available with I seal option. Available actuators, see pages G-7 and G-13. Not available with I seal option. Available actuators, see pages G-7 and G-13. V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN V2, V21 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’ OPTION CODE V2, V21 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’ OPTION CODE V2, V21 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’ OPTION CODE 7201J1__BE2 DPDT 7401J1__BE2 4PDT 7301J1__BE2 3PDT G Rocker G–19 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Rocker & Lever Handle Switches TERMINATIONS PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN V4, V9 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4, V9 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4, V9 VERTICAL MOUNT, V-BRACKET Not available with I seal option. Available actuators, see pages G-7 and G-13. Not available with I seal option. Available actuators, see pages G-7 and G-13. Not available with I seal option. Available actuators, see pages G-7 and G-13. 7101J1__BE2 SPDT 7201J1__BE2 DPDT 7301J1__BE2 3PDT V3, V31 .460 (11,68) V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE V3, V31 .460 (11,68) V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE G–20 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches CONTACT MATERIAL SEAL 'A' Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. Available with C, W through W5, Z & Z3 terminations. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.

3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. U11-U415 model numbers with all options when ordered with G, Q, S & R contact material. B contact material standard with all terminations except C, Z & Z3. Q contact material standard with C, Z & Z3 terminations. P , S & R, contact materials not available with Z & Z3 terminations. NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant. V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) DIM ‘A’ NO. POLES V4, V9 VERTICAL MOUNT, V-BRACKET 7401J1__BE2 4PDT E EPOXY SEAL I EPOXY POTTED BASE Not available with I seal option. Available actuators, see pages G-7 and G-13. OPTION CODE CONTACT MATERIAL TERMINAL PLATING RATINGS SILVER 5 MATTE-TIN 6 GOLD 1 SILVER 4,5 GOLD OVER SILVER 2,3 GOLD 3 MATTE-TIN 6 GOLD 1 MATTE-TIN 6 LOW LEVEL/ DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC OR DC MAX. 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. 0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. B P Q S G R G Rocker G–21 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE TYPICAL ASSEMBLY SCREW PANEL THICKNESS STAND-OFF LOCKWASHER NUT STAND-OFF LENGTH Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. See part numbers below. J1 & J2 actuators J10 actuators J3 actuators PART NO. PANEL THK. STANDOFF LENGTH 761103000 1/8 IN. (3,18) .233 (5,92) PART NO. PANEL THK. STANDOFF LENGTH 770703000 1/8 IN. (3,18) .233 (5,92) PART NO. PANEL THK. STANDOFF LENGTH 770603000 1/8 IN. (3,18) .233 (5,92) MATERIAL Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard. J1, J11, J15 & J16 Actuators PART NO. 776A01000 WHITE 776A02263 BLACK 776A03000 RED Material: Nylon Finish: Matte J50, J51 & J52 Actuators PART NO. 775A01000 WHITE 775A02263 BLACK 775A03000 RED Material: Nylon Finish: Matte J60, J61 & J62 Actuators PART NO.

598101000 WHITE

613802263 BLACK

598103000 RED

Material: Nylon Finish: Matte J8 Actuator PART NO.

488701000 WHITE

488702263 BLACK

488703000 RED

Material: Nylon Finish: Matte J2, J21, J25 & J26 Actuators PART NO. 426D01000 WHITE 426D02263 BLACK 426D03000 RED Material: Nylon Finish: Matte J3 & J37 Actuators PART NO. 431D01000 WHITE 431D02263 BLACK 431D03000 RED Material: Nylon Finish: Matte G–22 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Miniature Rocker & Lever Handle Switches J90 & J91 Actuators PART NO.

598001000 WHITE

598002263 BLACK

598003000 RED

Material: Nylon Finish: Matte J10 & J19 Actuators PART NO.

769501000 WHITE

769502263 BLACK

769503000 RED

Material: Nylon Finish: Matte Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. Frame for J11 & J21 Actuators PART NO.

764500746 BLACK ENAMEL

764500747 WHITE ENAMEL

764601106 RETAINING SPRING

Material: Spring Steel Frame for J19 Actuator PART NO.

781000746 BLACK ENAMEL

781000747 WHITE ENAMEL

Material: Spring Steel Frame for J37 Actuator PART NO.

445400746 BLACK ENAMEL

445400747 WHITE ENAMEL

Material: Spring Steel Frame for J52 & J62 Actuators PART NO.

613301000 WHITE

613302263 BLACK

613303000 RED

Material: Nylon Finish: Matte Frame for J16 & J26 Actuators PART NO.

459101000 WHITE

459102000 BLACK

459103000 RED

Material: Nylon Finish: Matte Frame for J51, J61 & J91 Actuators PART NO.

615601000 WHITE

615602263 BLACK

615603000 RED

Material: Nylon Finish: Matte G Rocker G–23 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE .495 – .505 (12,57 – 12,83) .797 – .803 (20,24 – 20,40) .005 R. MAX. (12,57 – 12,83) .595 – .605 (15,11 – 15,37) .005 R. (0,13) MAX. TYP. .495 – .505 (12,57 – 12,83) .620 – .625 (15,75 – 15,88) .005 R. (0,13) MAX. TYP. PANEL MOUNTING For part numbers 4529xxxxx, 4527xxxxx, 4528xxxxx, 4526xxxxx For part numbers 4325xxxxx, 4326xxxxx For part numbers 4327xxxxx, 4328xxxxx TYPICAL APPLICATION J1 & J2 Actuators J50, J60 & J90 Actuators .125” (3,18) PANEL THK. PART NO.

452602263 BLACK

.047” (1,19) PANEL THK. PART NO. 452902263 .062” (1,57) PANEL THK. PART NO. 452702263 .090” (2,29) PANEL THK. PART NO. 452802263 .125” (3,18) PANEL THK. PART NO.

432802263 BLACK

.047” (1,19) PANEL THK. PART NO. 432502263 .062” (1,57) PANEL THK. PART NO. 432602263 .090” (2,29) PANEL THK. PART NO. 432702263 Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator G–24 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

G–25 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE .030 (0,76) .200 DIA. (5,08˘) .025 SQ. TYP. (0,63) .750 (19,05).340 (8,64) .230 DIA. (5,84˘) Flat denotes cathode. Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. LED INFORMATION Process Information:Soldering to LED leads must be completed within 5 seconds at 500º F (260ºC) maximum. LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding actuator and is wired externally. Panel Inserts Will fit Separate Snap-in frames for J50, J60 & J90 actuators NOTE: Special colors, custom markings available, consult Customer Service Center. Suggested LED for J52 & J62 options. Dimensions for reference only. BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.

476602000 BLACK

PART NO. 894902000