BCE-95 GAMEWELL-FCI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Compatible with IF632 & IF650 FACPs. LED annunciates activation. Fully supervised. Surface or flush mounting. Field programmable. Style four, six, or seven wiring. Screw terminals for field wiring connections. Dry relay contacts. Provides controllable relay functions. Provides positive feedback of relay control. Separate on/start, off/stop operation. BCE-95 Microsoft® Windows® is a registered trademark of Microsoft® Corporation. CS-2041ph1.wmf An ISO 9000-2000 Company APPROVED FM SIGNALING S521 7300-1288:147
12 Clintonville Road, Northford, CT 06472-1610 USA Tel: (203) 484-7161 Fax: (203) 484-7118
CS-2041 Rev. A page 2 of 2 www.gamewell-fci.com Mounting The BCE-95 is designed to mount in a standard 4.0" (10.16 cm), 4.688" (11.908 cm) or double gang electrical back- box. The BCE-95 should be mounted in an easily accessi- ble location so that the built-in LED may be seen for quick indication of proper connection and activation. A programmable remote interface along with a panel mounted three position switch unit shall be provided for the control and status reporting of programmed building control functions. The remote interface shall communicate with the main control panel via an SLC over a single pair of wires. The BCE-95 shall provide dry contacts and positive feed- back of the controlled equipment’s status. On/Off control and annunciation at the panel shall be provided via a build- ing control display switch and annunciator unit. The remote interface shall be Gamewell-FCI BCE-95 with a Gamewell- FCI BCD display. Specifications Standby Current: 0.0008 A Alarm Current: 0.0018 A Operating Temperature: 0° C to 49°C (32°F to 120 °F) Relative Humidity: 85%, non-condensing Contact Rating: 2.0 A at 30 VDC. 0.5 A at 120 VAC. Input Power: 24 VDC from analog circuit. Housing Requirements: double gang electrical box.
Ordering Information
BCE-95 Building control element device. XP95 protocol compatible. 70839 Trim ring for flush mounting the BCE-95. BCD Building control display provides annunciation and ON/OFF/AUTO control of the BCE-95 con- trol element devices, mounts at the FACP. One needed for every eight BCEs. Note: The Building Control Element (BCE-95) is only compatible with the IdentiFlex 632 & 650 FACPs.