7080I AMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Programmable for stand alone operation with Applied Motion’s easy to use Si Programmer™ Windows software (software and programming cable included)
  • Can be operated in real time from a host PC or PLC using Ap- plied Motion’s Si Command Language™ (SCL)
  • Can be networked with all other Si™ products via Applied Motion’s SiNet™ Hub
  • DC bus voltage 24-80 VDC motor supply (including ripple)
  • Software selectable from 0.8–7.0 amps/phase motor current
  • Software selectable Step resolutions from 2,000 to 50,800 steps per revolution
  • Software selectable idle current reduction 0%, 25%, 50% or 100%
  • 8 user programmable inputs
  • 3 optically isolated 24 VDC outputs
  • Short circuit and over temperature protection
  • Communication via RS232
  • 560 watts of usable power
  • Screw terminal connector blocks for power and motor, Wago cage clamp connector for I/O. RJ11 for RS232 port
  • MOSFET, dual H-bridge, inaudible PWM amplifier
  • 3 state, pulse width modulated current control, switching at 20–30 kHz
  • Optional operator terminal (MMI) either standard or backlit
  • Drives 4, 6 or 8 lead size 11, 14, 17, 23 and 34 step motors
  • CE compliant

Description

The 7080i is a programming step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 560-watt microstepping amplifier. The 7080i includes Applied Motion’s easy to use Si Program- mer™ Windows software for the rapid development of stand alone motion control programs. The 7080i can also be com- manded in real time from a host PC or PLC, using the Si Com- mand Language™ . For multi-axis applications, up to eight Applied Motion Si™ drives (stepper or Servo) can be networked using a single SiNet™ Hub. The 7080i includes 8 programmable inputs for triggering, branching, position sensing and end of travel detection. 3 opti- cally isolated programmable outputs can send signals to other electronic devices and activate relays. The 7080i is a PC board mounted on an aluminum angle heat transfer chassis. Drive dimensions are 2˝ by 3˝ by 6˝. Recommended motors for the 7080i drive: Size 17 Size 23 Size 34 HT17-068 HT23-395 HT34-474 HT17-071 HT23-398 HT34-476 HT17-075 HT23-401 HT34-478 7080i Programmable Step Motor Indexer/Drive Microstepping 7.0 amps, 80 VDC 7080i Programmable Step Motor Drive MECHANICAL OUTLINE BLOCK DIAGRAM

404 Westridge Dr. • Watsonville, CA 95076 831/761-6555 • 800/525-1609 • FAX 831/761-6544 www.appliedmotionproducts.com STEPPER DRIVES 7080i Torque Curves HT17-068 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 1.375 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V HT17-071 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 1.0 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V HT17-071 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 1.0 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V HT17-068 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 1.375 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V HT17-075 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 1.75 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V HT17-075 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 1.75 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V HT23-395 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 4.2 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V HT23-395 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 4.2 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 80 V 48 V

404 Westridge Dr. • Watsonville, CA 95076 831/761-6555 • 800/525-1609 • FAX 831/761-6544 www.appliedmotionproducts.com 100 STEPPER DRIVES HT23-401 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 4.2 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 120 160 200 80 V 48 V HT23-401 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 4.2 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 100 150 200 250 80 V 48 V HT34-474 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 6.3 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 100 150 200 250 300 80 V 48 V HT34-474 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 6.3 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 4050 100 150 200 250 300 350 80 V 48 V HT34-476 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 6.3 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 200 400 600 800 80 V 48 V HT34-476 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 6.3 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 100 200 300 400 500 600 80 V 48 V HT23-398 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 4.2 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 120 80 V 48 V HT23-398 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 4.2 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 120 150 80 V 48 V 7080i Torque Curves

404 Westridge Dr. • Watsonville, CA 95076 831/761-6555 • 800/525-1609 • FAX 831/761-6544 www.appliedmotionproducts.com 101 STEPPER DRIVES HT34-478 MOTOR Motor Connection: Parallel Drive Setting: 1/10th Resolution • 5.6 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 200 400 600 800 1000 80 V 48 V HT34-478 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 5.6 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 200 400 600 800 1000 80 V 48 V