704-15K36 SENSITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600, FAX (631) 242 9798 World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 561, REV. - 704-15K36 704-15K36T Transient Voltage Suppressor, Unidirectional FEATURES: Equivalent Industry Standard Part Numbers – 704-15K36 & 704-15K36T Designed For MIL-STD-704 28 Volt Power Supply Protection Can be supplied with JAN/JANTX parts This series is primarily for use in avionics equipment. It meets all applicable environmental requirements of MIL-S- 19500. These 15kW assemblies are designed typically to operate with a minimum source impedance of .25 Ohms for transients. MAXIMUM RATINGS Rating Condition Minimum Maximum Units Peak Pulse Power Dissipation @ 25, 1ms - 15,000 Watts Steady State Power Dissipation - - 10 Watts tclamping 0 Volts to V(BR) - < 1x 10 – 12 Seconds Operating & Storage Temp. - -65 + 150 C Forward Surge Current 1/120 sec. @ 25C - 300 Amps Duty Cycle - - 0.01 % ELECTRICAL CHARACTERISTICS @ 25 (Test Both Polarities) Part Number Reverse Stand-Off Voltage (Note 1) VWM Volts Maximum Reverse Leakage @ Vwm ID A Minimum Breakdown Voltage @ 10 mA V(BR) Volts Maximum Clamping Voltage @ IPP Vc Volts Maximum Peak Pulse Current (Fig. 2) IPP Amps Maximum Forward Voltage VF @ 8.3 msec. 100A Volts DC 704-15K36 704-15K36T 31.5 31.5 100 100 300 300 3.0 3.0 Note 1: A device is normally selected according to the reverse “ Stand Off Voltage” (VWM) which should be equal to or greater than the DC or continuous peak operating voltage level. Special Voltages available from the factory. 704-15K36 704-15K36T
221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600, FAX (631) 242 9798 World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com 704-15K36 704-15K36T TECHNICAL DATA DATA SHEET 561, REV. - MECHANICAL CHARACTERISTICS CASE: Molded Case TERMINAL: Silver Plated Brass POLARITY: Cathode terminal marked with a dot WEIGHT: 38 grams MOUNTING POSITION: Any MECHANICAL DIMENSIONS: In Inches / mm Flat Leads Turret Leads
221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600, FAX (631) 242 9798 World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com
221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600, FAX (631) 242 9798 World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com
221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600, FAX (631) 242 9798 World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com
221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600, FAX (631) 242 9798 World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com
- 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
- World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.