6A05G MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts 6A05G THRU 6A10G CURRENT 6.0 Ampere

FEATURES

  • Glass passivated chip junction
  • Low reverse leakage
  • Low forward voltage
  • High forward surge current capability
  • High temperature soldering guaranteed 260℃/10 seconds,0.375”(9.5mm)lead length MECHANICAL DATA
  • Case: Transfer molded plastic
  • Epoxy: UL94V-0 rate flame retardant
  • Polarity: Color band denotes cathode end
  • Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
  • Mounting position: Any
  • Weight: 0.07ounce, 2.0 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS 6A 05G 2GG 10G UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current 0.375”(9.5mm) lead length at TA=60℃ I(AV) 6.0 Amps Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) IFSM 250 Amps Maximum Instantaneous Forward Voltage at 6.0A VF 0.95 Volts TA = 25℃ 10.0 Maximum DC Reverse Current at rated DC blocking Voltage at TA = 100℃ IR 500 µA Maximum Full Load Reverse Current, full cycle Average 0.375(9.5mm) lead length at T L=105℃ IR(AV) 500 µA Typical Junction Capacitance (NOTE 2) CJ 100 pF Typical Thermal Resistance (NOTE 1) RθJA 10 ℃/W Operating Temperature Range TJ (-55 to +150) ℃ Storage Temperature Range TSTG (-55 to +150) ℃ Notes: (30mm×30mm) copper pads. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DIA..052(1.3) .048(1.2) 1.0(25.4) MIN. .360(9.1) .340(8.6) 1.0(25.4) MIN. DIA. Dimensions in inches and (millimeters) R-6 .360(9.1) .340(8.6)

AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts 6A05G THRU 6A10G CURRENT 6.0 Ampere FIG.2-MAXIMUM NON-REPETITIVE PEAK 100 Tjmax 4020102 300 200 100 CURRENT, (A) PEAK FORWARD SURGE NUMBER OF CYCLES AT 60 Hz 8.3ms Single Half Sine-Wave (JEDEC Method) T= FORWARD SURGE CURRENTDERATING CURVE FIG.1-TYPICAL FORWARD CURRENT 150 17512575 100 4.0 2.0

60 Hz Resistive or

AVERAGE FORWARD CURRENT, (A) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS AMBIENT TEMPERATURE, (° C) (μA) 1.4 JT =25° C 1.21.00.80.6 1% Duty Cycle Pulse Width=300us 1.0 0.1 1000 100 INSTANTANEOUS FORWARD VOLTAGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 0.1 REVERSE VOLTAGE,(V) Vsig=50mVp-p JUNCTION CAPACITANCE,(pF) INSTANTANEOUS REVERSE CURRENT, 1.61.82.0 Recommended P.C. Board f=1MHz T =25° C 468

1 Cycle

1.010100 J REVERSE VOLTAGE,(%) PERCENT OF RATED PEAK 120 1400 0.01 0.1 1.0 1006040 80 T =25° CJ FIG.4-TYPICAL REVERSE CHARACTERISTICS T =100° CJ 1.0 3.0 5.0 6.0 Mounting 1”×1”Copper P.C.Board 400 250 100 1000 Single Lead to heat Sink, Insignificant Heat Flow Through Other Lead Equal Length Both Leads to Heat Sink, EQUAL LEAD LENGTH TO HEAT SINK(IN.) THERMAL RESISTANCE, R (° C/W)θJL VS LEAD LENGTH FIG.6-TYPICAL THERMAL RESISTANCE INSTANTANEOUS FORWARD CURRENT, (A)(A) RATING AND CHRACTERISTIC CURVES 6A05S THRU 6A10S