HMC699LP5 AD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
7 GHz INTEGER N SYNTHESIZER
CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) HMC699LP5 / 699LP5E v05.0110 The hMC699LP5(E) is a frequency synthesizer with a wideband reversible polarity digital PFD and lock detect output. The divider operates from 160 - 7000 Mhz w ith a continuous integer division ratio N = 56 to 519 and non-continuous division ratio N = 16 to 54. The hMC 699LP5(E) high frequency operation along with ultra low phase noise floor make possible synthesizers with wide loop bandwidth and low N resulting in fast settling and very low phase noise. When used in conjunction with a differential loop filter, the hMC 699LP5(E) can be used to phase lock a VCO to a reference oscillator. For continuous division ratio, the A counter and s counter must satisfy the condition: A + 1 ≥ s. Ultra Low ssB Ph ase Noise Floor: 53 dBc/hz @ 10 khz of fset @ 100 Mhz Re ference Frequency. Programmable Divider (N = 16 - 519) Op erating up to 7 Ghz Op en Collector Output Buffer Amplifiers for In terfacing w/ Op-Amp Based Loop Filter Reversible Polarity PFD w/ Lock Detect Output
32 Lead 5x5mm sMT P
ackage: 25mm2 Electrical Specifications, TA = +25° C, Vcc = Vcc1 = Vcc2 = Vcc3 = Vcc_pd = 5V The hMC699LP5(E) is ideal for:
- sat ellite Communication syst ems
- Point-to-Point Radios
- Military Applications son et Clock Generation Parameter Conditions Min. Typ. Max. Units Maximum Ref. Input Frequency sin e or squ are Wave Input [1] 1300 Mhz Mi nimum Ref. Input Frequency squ are Wave Input [2] 10 M hz Re ference Input Power Range 100 Mhz Fr equency -5 +5 dBm Maximum VCO Input Frequency 7000 Mhz Mi nimum VCO Input Frequency sin e Wave Input 160 M hz VC O Input Power Range 100 Mhz In put Frequency -10 +5 dBm PFD Output Voltage 2000 mV, Pk - Pk PFD Gain Gain = Vpp / 2π Rad. 0.32 V/Rad. ssB Ph ase Noise @ 10 khz Of fset @ 100 Mhz squ are Wave Ref. Input Pin= 0 dBm -153 dBc/hz To tal sup ply Current 345 mA [1] Maximum frequencies may be limited by available counter division ratio. [2] squ are wave input achieves best phase noise at lower reference frequency (see sine & square wave comparison plots) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 2 HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) [1] Phase Noise Floor vs Offset Frequency with varying Ref Power Level [2] Fin = 7000 Mhz @ 0 dBm, R ef Frequency = 100 Mhz, N = 70 [3] Phase Noise Floor r emains constant beyond 100 khz of fset frequency Phase Noise Floor [1][2][3] Ref = Sine Wave, Vcc = 4.75V Phase Noise Floor [1][2][3] Ref = Sine Wave, Vcc = 5V Phase Noise Floor [1][2][3] Ref = Square Wave, Vcc = 4.75V Phase Noise Floor [1][2][3] Ref = Square Wave, Vcc = 5V Phase Noise Floor [1][2][3] Ref = Sine Wave, Vcc = 5.25V Phase Noise Floor [1][2][3] Ref = Square Wave, Vcc = 5.25V -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 3 Typical DC Characteristics @ Vcc = +5V symbol Characteristics 25°C Units Min. Typ. Max. Icc Power sup ply Current 310 345 380 mA Voh Output hig h Voltage, (NU, ND) 5 5 5 V Vol Output Low Voltage, (NU, ND) 2.9 3.0 3.1 V Absolute Maximum Ratings RF Input (Vcc = +5V) +10 dBm suppl y Voltage (Vcc) +5.5V Logic Inputs -0.5V to (0.5V + Vcc) Junction Temperature (Tc) 135 °C Continuous Pdiss (T = 85 °C) (derate 87 mW/°C above 85 °C) 4.3 W Thermal Resistance (Junction to ground paddle) 11 .60 °C/W st orage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Typical Supply Current vs. Vcc Vcc (V) Icc (mA) 4.75 318 5.00 345 5.25 369 Note: hMC669LP5(E) will w ork over full voltage range above. ELECTROsTA TIC sENsIT IVE DEVICE OBsER VE hAN DLING PRECAUTIONs HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) [1] Phase Noise Floor vs Offset Frequency over temperature [2] Fin= 7000 M hz @ 0 dBm, R ef Frequency = 100 Mhz, N = 70 [3] Phase Noise Floor r emains constant beyond 100 khz of fset frequency Phase Noise Floor vs Offset Frequency with varying Fin @ 0 dbm, Ref = 100 MHz Square Wave @ 5 dBm, Vcc = 5V [3] Phase Noise Floor [1][2][3] Ref = Square Wave @ 5 dBm, Vcc = 5V Phase Noise Floor [1][2][3] Ref = Sine Wave @ 5 dBm, Vcc = 5V -180 -170 -160 -150 -140 -130 -120 -110 -100 +25 C +85 C -40 C SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 +25 C +85 C -40 C SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100
1600 MHz
7000 MHz
SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 4 HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) Outline Drawing Part Number Package Body Material Lead Finish M sL Ra ting Package Marking [3] hMC699LP5 L ow str ess Injection Molded Plastic sn/ Pb sol der MsL1 [1] h699 X XXX hMC 699LP5(E) Ro hs-c ompliant Low str ess Injection Molded Plastic 100% matte sn MsL1 [2] h699 X XXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX
Package Information
NOTEs: 1. LE ADFRAME MATERIAL: COPPER ALLO y 2. DI MENsIO Ns A RE IN INChEs [ MILLIMETER s]. . LE AD sPA CING TOLERANCE I s N ON-CUMULATIVE 4. PAD BURR LENGTh s hAL L BE 0.15mm MAXIMUM. PAD BURR hEI GhT s hAL L BE 0.05mm MAXIMUM. 5. PACKAGE WARP s hAL L NOT EXCEED 0.05mm. 6. ALL GROUND LEAD s A ND GROUND PADDLE MU sT BE sOL DERED TO PCB RF GROUND. 7. REFER TO hIT TITE APPLICATION NOTE FOR sUG GEsTE D PCB LAND PATTERN. Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 5 Pin Description Pin Number Function Description Interface schematic 1 L D Pulsed output. Average “LOW” = UNLOCKED. Average “hIGh” = LO CKED
2 INV
ompatible input control bit Logic “LOW” = NORMAL Logic “hIGh” = IN VERT 3, 6 - 8, 17, 19, 20, 24, 26, 29, 32 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 4, 5, 18, 25 Vcc1, Vcc3, Vcc2, Vcc_pd sup ply Voltage 5V ±0.25V 9 - 14 N0 - N5 CMOs c ompatible control input bit 0 (L sB) - 5 15 FIN (These pins are AC coupled and must be DC Blocked externally.) Frequency Input Frequency Input Complement16 NFIN 22, 23 s1, s0 CM Os c ompatible Control Input bit 0 (LsB) - HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 6 HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) Pin Number Function Description Interface schematic
8 REF
Reference Input Complement (These pins are AC coupled and must be DC Blocked externally.)
27 NREF
30 ND Down Output
31 NU Up Output
Paddle GND Package bottom has an exposed ground paddle that must be connected to RF/DC ground Pin Description (Continued) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 7 HMC699LP5(E) Programming Truth Table, Continuous Division Ratios HMC699LP5(E) Programming Division Ratio N A Counter Decimal set swa llow s D ecimal set ( LsB) A1 A2 A3 A4 A5 (LsB) s0 s1 s2 6 6 0 0 1 1 0 0 0 0 0 0 57 6 1 0 1 1 0 0 0 1 0 0 58 6 2 0 1 1 0 0 0 0 1 0 59 6 3 0 1 1 0 0 0 1 1 0 60 6 4 0 1 1 0 0 0 0 0 1 61 6 5 0 1 1 0 0 0 0 0 1 62 6 6 0 1 1 0 0 0 0 1 1 63 6 7 0 1 1 0 0 0 1 1 1 64 7 0 1 1 1 0 0 0 0 0 0 65 7 1 1 1 1 0 0 0 1 0 0 66 7 2 1 1 1 0 0 0 0 1 0 67 7 3 1 1 1 0 0 0 1 1 0 HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) The decimal value of A counter and s counter can be defined as: A = in t ( ) - 1 and s = N - 8 ( A + 1) where N = 16 to 5 For a valid division ratio N, the A counter and s c ounter must satisfy the condition: A +1 ≥ s Th erefore, N = 16 to 54 will result into non-continuous division ratio and N = 56 to 519 will be continuous division ratio. Example: Given a reference frequency, Fref = 11 M hz, and VCO output frequency, Fvco = (198 to 297) M hz, results in N = 18 to 27. The decimal value of A counter and s c ounter for N = 18 will be: A = in t ( ) - 1 = 1 and s = 1 8 - 8 (1 + 1) = 2 sin ce the calculated value of A and s s atisfy the condition of A + 1 ≥ s, th e N = 18 is usable division ratio. The division ratio, N = 23, however, will result in A = 1 and s = 7. Under the condition A +1 ≥ s, t he division ratio N = 23 is not usable. In this example, the division ratio, N = 19 to 23 cannot be programmed and therefore, the frequency range of 209 M hz to 25
3 Mhz ca
nnot be used. N Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 8 HMC699LP5(E) Programming Truth Table, Continuous Division Ratios (Continued) HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) Division Ratio N A Counter Decimal set swa llow s D ecimal set ( LsB) A1 A2 A3 A4 A5 (LsB) s0 s1 s2 12 63 0 1 1 1 1 1 1 0 0 0 513 63 1 1 1 1 1 1 1 1 0 0 514 63 2 1 1 1 1 1 1 0 1 0 515 63 3 1 1 1 1 1 1 1 1 0 516 63 4 1 1 1 1 1 1 0 0 1 517 63 5 1 1 1 1 1 1 1 0 1 518 63 6 1 1 1 1 1 1 0 1 1 519 63 7 1 1 1 1 1 1 1 1 1 HMC699LP5(E) Programming Truth Table, Non-Continuous Division Ratios Division Ratio N A Counter Decimal set swa llow s D ecimal set ( LsB) A1 A2 A3 A4 A5 (LsB) s0 s1 s2 6 1 0 1 0 0 0 0 0 0 0 0 17 1 1 1 0 0 0 0 0 1 0 0 18 1 2 1 0 0 0 0 0 0 1 0 24 2 0 0 1 0 0 0 0 0 0 0 25 2 1 0 1 0 0 0 0 1 0 0 26 2 2 0 1 0 0 0 0 0 1 0 27 2 3 0 1 0 0 0 0 1 1 0 32 3 0 1 1 0 0 0 0 0 0 0 33 3 1 1 1 0 0 0 0 1 0 0 34 3 2 1 1 0 0 0 0 0 1 0 35 3 3 1 1 0 0 0 0 1 1 0 36 3 4 1 1 0 0 0 0 0 0 1 40 4 0 0 0 1 0 0 0 0 0 0 41 4 1 0 0 1 0 0 0 1 0 0 42 4 2 0 0 1 0 0 0 0 1 0 43 4 3 0 0 1 0 0 0 1 1 0 44 4 4 0 0 1 0 0 0 0 0 1 45 4 5 0 0 1 0 0 0 1 0 1 48 5 0 1 0 1 0 0 0 0 0 0 49 5 1 1 0 1 0 0 0 1 0 0 50 5 2 1 0 1 0 0 0 0 1 0 51 5 3 1 0 1 0 0 0 1 1 0 52 5 4 1 0 1 0 0 0 0 0 1 53 5 5 1 0 1 0 0 0 1 0 1 54 5 6 1 0 1 0 0 0 0 1 1 * Choose values of R2 & R4 between 4.3 and 20 Ohms for best noise performance. Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 9 HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) Evaluation PCB Circuit Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 10 HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) Evaluation PCB List of Materials for Evaluation PCB 116108 [1] Item Description J1 - J4 PC Mount sMA R F Connector J5 - J6 2mm DC hea der C1 - C5, C8 - C10 1000 pF Capacitor, 0402 Pkg. C6 - C7 100 pF Capacitor, 0402 Pkg. C15 1000 pF Capacitor, 0603 Pkg. C16 4.7 μF Tantalum Capacitor Case A D LED Green, 0603 Pkg., +5V R1 10k Ohm, Resistor, Array R8, R10 10k Ohm, Resistor, 0402 Pkg. R11 1k Ohm, Resistor, 0402 Pkg. R12 100 Ohm, Resistor, 0402 Pkg. U1 hMC 699LP5(E) syn thesizer PCB [2] 116106 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. sig nal lines should have 50 Ohm impedance while the package backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from hit tite upon request. Note: The evaluation PCB for the hMC 699LP5(E) contains 10 kOhm pull up resistors for each of the control inputs A0 through A5 and s0 t hrough s2. Programming the 489 distinct division ratios consists of installing or removing jumpers A0 through A5 and s0 th ough s2. Note: 0 = Jumper Installed. 1 = Jumper Not Installed. Evaluation PCB Truth Table (see Programming Truth Table) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 11 Typical PLL Application Circuit using HMC699LP5 PLL application shown for a 13 Ghz Fo ut. Contact hMC to d iscuss your specific application. HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 12 HMC699LP5 / 699LP5E v05.0110 CONTINUOUS (N = 56 - 519), NON-CONTINUOUS (N = 16 - 54) CMOS/TTL Input Characteristics Maximum Input Logic “0” Voltage (V IL MAXIMUM) = 1.1V @ 1 µA. Minimum Input Logic “1” Voltage (VIh M INIMUM ) = 1.8V @ 50 µA. Input IV characteristics for the logic inputs (A0 - A5 and s0 - s2) a re shown below: -0.1 0.1 0.2 0.3 0.4 0 1 2 3 4 5 Input Current (mA) Input Voltage (V) V IL MAX V IH MIN Typical Application Showing Spurious Performance Typical Application
13 GHz Measured Phase Noise
[1] -180 -170 -160 -150 -140 -130 -120 -110 -100 MEASURED CALCULATED SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) [1] Phase Noise Floor remains constant beyond 100 k hz of fset frequency. Measured phase noise using Agilent 5500 with 2 unit measurement technique and corresponding calculated phase noise floor. Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D