HMC698LP5 AD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259) HMC698LP5 / 698LP5E v03.0709 The hMC698LP5(E) is a frequency synthesizer with a wideband reversible polarity digital PFD and lock detect output. The divider operates unconditionally from 80 - 7000 M hz w ith a continuous integer division ratio of 12 to 259. The hMC 698LP5(E) high frequency operation along with ultra low phase noise floor make possible synthesizers with wide loop bandwidth and low N resulting in fast settling and very low phase noise. When used in conjunction with a differential loop filter, the hMC 698LP5(E) can be used to phase lock a VCO to a reference oscillator. Ultra Low ssB Ph ase Noise Floor: 53 dBc/hz @ 10 khz of fset @ 100 Mhz Re ference Frequency. Programmable Divider (N= 12 - 259) Operating up to 7 Ghz Op en Collector Output Buffer Amplifiers for In terfacing w/ Op-Amp Based Loop Filter Reversible Polarity PFD w/ Lock Detect Output
32 Lead 5x5mm sMT P
ackage: 25mm2 Electrical Specifications, TA = +25° C, Vcc = Vcc1 = Vcc2 = Vcc3 = Vcc_pd = 5V The hMC698LP5(E) is ideal for:
- sat ellite Communication syst ems
- Point-to-Point Radios
- Military Applications son et Clock Generation Parameter Conditions Min. Typ. Max. Units Maximum Ref. Input Frequency sin e or squ are Wave Input [1] 1300 Mhz Mi nimum Ref. Input Frequency squ are Wave Input [2] 10 M hz Re ference Input Power Range 100 Mhz Fr equency -5 +5 dBm Maximum VCO Input Frequency 7000 Mhz Mi nimum VCO Input Frequency 80 M hz VC O Input Power Range 100 Mhz In put Frequency -10 +5 dBm PFD Output Voltage 2000 mV, Pk - Pk PFD Gain Gain = Vpp / 2π Rad. 0.32 V/Rad. ssB Ph ase Noise @ 10 khz Of fset @ 100 Mhz squ are Wave Ref. Input Pin= 0 dBm -153 dBc/hz To tal sup ply Current 310 mA [1] Maximum frequencies may be limited by available counter division ratio. [2] squ are wave input achieves best phase noise at lower ref. frequency (see sine & square wave comparison plots) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 2 -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Phase Noise Floor [1][2][3] Ref = Sine Wave, Vcc = 4.75V Phase Noise Floor [1][2][3] Ref = Sine Wave, Vcc = 5V -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) Phase Noise Floor [1][2][3] Ref = Square Wave, Vcc = 4.75V Phase Noise Floor [1][2][3] Ref = Square Wave, Vcc = 5V Phase Noise Floor [1][2][3] Ref = Sine Wave, Vcc = 5.25V Phase Noise Floor [1][2][3] Ref = Square Wave, Vcc = 5.25V -180 -170 -160 -150 -140 -130 -120 -110 -100 -10 dBm -5 dBm 0 dBm +5 dBm SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) [1] Phase Noise Floor vs Offset Frequency with varying Ref Power Level [2] Fin= 7000 Mhz @ 0 dBm, R ef Frequency = 100 Mhz, N = 70 [3] Phase Noise Floor r emains constant beyond 100 khz of fset frequency Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 3 HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) -180 -170 -160 -150 -140 -130 -120 -110 -100 +25C +85C -45C SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) Phase Noise Floor vs Offset Frequency with varying Fin @ 0 dbm, Ref = 100 MHz Square Wave @ 5 dBm, Vcc = 5V [3] -180 -170 -160 -150 -140 -130 -120 -110 -100
1000 MHz
7000 MHz
SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 +25C +85C -45C SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) Phase Noise Floor [1][2][3] Ref = Sine Wave @ 5 dBm, Vcc = 5V Phase Noise Floor [1][2][3] Ref = Square Wave @ 5 dBm, Vcc = 5V [1] Phase Noise Floor vs Offset Frequency over temperature [2] Fin= 7000 Mhz @ 0 dBm, R ef Frequency = 100 Mhz, N = 70 [3] Phase Noise Floor r emains constant beyond 100 khz of fset frequency Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 4 Typical DC Characteristics @ Vcc = +5V symbol Characteristics 25C Units Min. Typ. Max. Icc Power sup ply Current 280 310 340 mA Voh Output hig h Voltage, (NU, ND) 5 5 5 V Vol Output Low Voltage, (NU, ND) 2.9 3.0 3.1 V Absolute Maximum Ratings RF Input (Vcc= +5V) +10 dBm suppl y Voltage (Vcc) +5.5V Logic Inputs -0.5V to (0.5V + Vcc) Junction Temperature (Tc) 135 °C Continuous Pdiss (T = 85 °C) (derate 78 mW/° C above 85 °C) 3.9 W Thermal Resistance (Junction to ground paddle) 12.90 °C/W st orage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Typical Supply Current vs. Vcc Vcc (Vdc) Icc (mA) 4.75 294 5.00 310 5.25 342 Note: hMC698LP5 will w ork over full voltage range above. ELECTROsTA TIC sENsIT IVE DEVICE OBsER VE hAN DLING PRECAUTIONs HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 5 Outline Drawing Part Number Package Body Material Lead Finish M sL Ra ting Package Marking [3] hMC698LP5 L ow str ess Injection Molded Plastic sn/ Pb sol der MsL1 [1] h698 X XXX hMC 698LP5(E) Ro hs-c ompliant Low str ess Injection Molded Plastic 100% matte sn MsL1 [2] h698 X XXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX
Package Information
NOTEs: 1. LE ADFRAME MATERIAL: COPPER ALLO y 2. DI MENsIO Ns A RE IN INChEs [ MILLIMETER s]. . LE AD sPA CING TOLERANCE I s N ON-CUMULATIVE 4. PAD BURR LENGTh s hAL L BE 0.15mm MAXIMUM. PAD BURR hEI GhT s hAL L BE 0.05mm MAXIMUM. 5. PACKAGE WARP s hAL L NOT EXCEED 0.05mm. 6. ALL GROUND LEAD s A ND GROUND PADDLE MU sT BE sOL DERED TO PCB RF GROUND. 7. REFER TO hIT TITE APPLICATION NOTE FOR sUG GEsTE D PCB LAND PATTERN. HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 6 Pin Description Pin Number Function Description Interface schematic 1 L D Pulsed output. Average “LOW” = UNLOCKED. Average “hIGh” = LO CKED
2 INV
ompatible input control bit Logic “LOW” = NORMAL Logic “hIGh” = IN VERT 4, 5, 18, 25 Vcc1, Vcc3, Vcc2, Vcc_pd sup ply Voltage 5V ±0.25V 9 - 14 N0 - N5 CMOs c ompatible control input bit 0 (L sB) - 5 15 FIN (These pins are AC coupled and must be DC Blocked externally.) Frequency Input Frequency Input Complement16 NFIN 22, 23 s1, s0 CM Os c ompatible Control Input bit 0 (LsB) - HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 7 Pin Number Function Description Interface schematic
8 REF
Reference Input Complement (These pins are AC coupled and must be DC Blocked externally.)
27 NREF
30 ND Down Output
31 NU Up Output
3, 6 - 8, 17, 19 - 21, 24, 26, 29, 32 N/C No Connection. These pins may be connected to RF/DC ground. Performance will not be affected. Ground Paddle GND Package bottom has an exposed ground paddle that must be connected to RF/DC ground HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Pin Description (Continued) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 8 HMC698LP5(E) Programming Truth Table Division Ratio n N Counter N Counter Decimal set swa llow s C ounter swa llow s D ecimal set ( LsB) N
0 N1 N2 N3 N4 N5
(LsB) s0 s1 12 3 2 0 0 0 1 0 0 0 0 0 0 13 3 2 1 1 0 1 0 0 0 0 1 0 14 3 2 2 2 0 1 0 0 0 0 0 1 15 3 2 3 3 0 1 0 0 0 0 1 1 16 4 3 0 0 1 1 0 0 0 0 0 0 17 4 3 1 1 1 1 0 0 0 0 1 0 18 4 3 2 2 1 1 0 0 0 0 0 1 19 4 3 3 3 1 1 0 0 0 0 1 1 20 5 4 0 0 0 0 1 0 0 0 0 0 21 5 4 1 1 0 0 1 0 0 0 1 0 22 5 4 2 2 0 0 1 0 0 0 0 1 23 5 4 3 3 0 0 1 0 0 0 1 1 252 63 62 0 0 0 1 1 1 1 1 0 0 253 63 62 1 1 0 1 1 1 1 1 1 0 254 63 62 2 2 0 1 1 1 1 1 0 1 255 63 62 3 3 0 1 1 1 1 1 1 1 256 64 63 0 0 1 1 1 1 1 1 0 0 257 64 63 1 1 1 1 1 1 1 1 1 0 258 64 63 2 2 1 1 1 1 1 1 0 1 259 64 63 3 3 1 1 1 1 1 1 1 1 N = INT (n/P) s = M OD (n/P) Where: n = Desired division ratio P = Prescaler value = 4 N = Counter N value (counter decimal set is N - 1) HMC698LP5(E) Programming Truth Table, Non-Continuous Division Ratios Division Ratio n N Counter N Counter Decimal set swa llow s C ounter swa llow s D ecimal set ( LsB) N (LsB) s0 s1 8 2 1 0 0 1 0 0 0 0 0 0 0 9 2 1 1 1 1 0 0 0 0 0 1 0 10 2 1 2 2 1 0 0 0 0 0 0 1 N = INT (n/P) s = M OD (n/P) Where: n = Desired division ratio P = Prescaler value = 4 N = Counter N value (counter decimal set is N - 1) HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 9 HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Evaluation PCB Circuit Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 10 Evaluation PCB List of Materials for Evaluation PCB 122625 [1] Item Description J1 - J4 PC Mount sMA R F Connector J5 - J6 2mm DC hea der C1 - C5, C8 - C10 1000 pF Capacitor, 0402 Pkg C6 - C7 100 pF Capacitor, 0402 Pkg C15 1000 pF Capacitor, 0603 Pkg C16 4.7 μF Tantalum Capacitor Case A D LED Green, 0603 Pkg R1 10k Ohm, Resistor, Array R8, R9 10k Ohm, Resistor, 0402 Pkg. R11 1k Ohm, Resistor, 0402 Pkg. R12 100 Ohm, Resistor, 0402 Pkg. U1 hMC 698LP5(E) syn thesizer PCB [2] 116106 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. sig nal lines should have 50 ohm impedance while the package backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from hit tite upon request. Note: The evaluation PCB for the hMC 698LP5 contains 10K Ohm pull up resistors for each of the 9 control inputs. Programming the 251 distinct division ratios consists of installing or removing jumpers N0 through N5 and s0, s1. Note: 0 = Jumper Installed. 1 = Jumper Not Installed. Evaluation PCB Truth Table (see Programming Truth Table) HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 11 Typical PLL Application Circuit using HMC698LP5 PLL application shown for a 13.0 Ghz Fo ut. Contact hMC to d iscuss your specific application. HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PLL - INTEGER-N s yNThEsIzER - sMT 6 - 12 CMOS/TTL Input Characteristics Maximum Input Logic “0” Voltage (V IL MAXIMUM) = 1.1V @ 1 µA. Minimum Input Logic “1” Voltage (VIh M INIMUM ) = 1.8V @ 50 µA. Input IV characteristics for the logic inputs (N0 - N5, s0 - s1) a re shown below: -0.1 0.1 0.2 0.3 0.4 0 1 2 3 4 5 Input Current (mA) Input Voltage (V) V IL MAX V IH MIN HMC698LP5 / 698LP5E v03.0709 (N = 12 - 259) Typical Application Showing Spurious Performance Typical Application
13 GHz Measured Phase Noise
[1] -180 -170 -160 -150 -140 -130 -120 -110 -100 MEASURED CALCULATED SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) [1] Phase Noise Floor remains constant beyond 100 k hz of fset frequency. Measured phase noise using Agilent 5500 with 2 unit measurement technique and corresponding calculated phase noise floor. Information furn ished by An alog Devices is believed to be a ccurate and reliable. However, no responsibility is assumed by An alog Devices for its u se, nor for any infring ements of pat ents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place o rders: An alog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 O rder online at www.an alog.com Application Sup port: Phone: 1-800-ANALOG-D