698

694_12 BITECH | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

1 Specifications subject to change without notice. 2 E96 codes available. 3 Standard limits for all resistance codes. BI Technologies Corporation

4200 Bonita Place

Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 1 of 3 BI technologies Precision Nichrome Resistors on Ceramic Passivation coating provides protection in humid environments Excellent frequency response Excellent long term resistance stability Industry Standard Packaging JEDEC 95, MS-001 (Plastic DIP 0.300 inch wide in 8, 14 and 16 lead pin counts) Ratio Tolerances < ± 0.05% TCR Tracking Tolerances < ± 5 ppm/° C     Standard Resistance Range2 1K ohms to 100K ohms (Isolated) 1K ohms to 45K ohms (Bussed) TCR3 ± 25 ppm/° C TCR Tracking3 ± 5 ppm/° C Operating Temperature Range -55°C to +125°C Interlead Capacitance < 2pF Insulation Resistance  10,000 Megohms Maximum Operating Voltage 100 Vdc or  PR Noise, Maximum (MIL-STD-202, Method 308) -40 dB Resistor Power Rating at 70° C 0.1 Watts 1 Specifications subject to change without notice. 2 E96 codes available. 3 Standard limits for all resistance codes.

Model Package Power @ 70°C(watts)4 694 0.4 698 0.6 699 0.6 Nichrome Resistor Networks on Ceramic Substrates Model 694, 698, 699 Series General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 1.12 Package Power And Derating Curve Thermal Shock plus Power Conditioning ΔR 0.25% Short Time Overload ΔR 0.1% Terminal Strength ΔR 0.1% Moisture Resistance ΔR 0.2% Mechanical Shock ΔR 0.25% Vibration ΔR 0.25% Low Temperature Operation ΔR 0.1% High Temperature Exposure ΔR 0.1% Load Life, 1,000 Hours ΔR 0.1% Resistance to Solder Heat ΔR 0.1% Dielectric Withstanding Voltage 200V for 1 minute Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range -65°C to +125°C Lead Plating 100 matte Tin (RoHS) Lead Material Copper Alloy Lead Configuration Thru hole Substrate Material Alumina Resistor Material Passivated Nichrome Body Material Molded Epoxy Environmental (Mil-R-83401) Mechanical

4 Maximum power per resistor @ 70°C is 100 mW, not to exceed package power

BI Technologies Corporation Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 2 of 3 BI technologies Model Package Power @ 70°°°°C(watts) 4 694 0.4 698 0.6 699 0.6  Thermal Shock plus Power Conditioning ∆R 0.25% Short Time Overload ∆R 0.1% Terminal Strength ∆R 0.1% Moisture Resistance ∆R 0.2% Mechanical Shock ∆R 0.25% Vibration ∆R 0.25% Low Temperature Operation ∆R 0.1% High Temperature Exposure ∆R 0.1% Load Life, 1,000 Hours ∆R 0.1% Resistance to Solder Heat ∆R 0.1% Dielectric Withstanding Voltage 200V for 1 minute Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range -65°C to +125°C Lead Plating 80/20 Tin Lead (Standard) 100 matte Tin (RoHS) Lead Material Copper Alloy Lead Configuration Thru hole Substrate Material Alumina Resistor Material Passivated Nichrome Body Material Molded Epoxy

4 Maximum power per resistor @ 70° C is 100 mW, not to exceed package power

Nichrome Resistor Networks on Ceramic Substrates Model 694, 698, 699 Series General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 1.12 Typical Marking Ordering Information5 69 4 -3- R10K A LF Model Series: 69 = Passivated Nichrome on Ceramic Number of Leads: 4= 8 leads 9=14 leads 8=16 leads Circuit Type: 1=Bussed 3=Isolated 6=Binary (Only available as 694 model with B tolerance) 7=Decade (Only available as 694 model with B tolerance) Lead Finish: LF = Lead free (RoHS) Tolerance Code Resistance Value Accuracy Code at 25°C A B D F Absolute Resistance Tolerances (%) ± 0.1 ± 0.1 ± 0.5 ± 1.0 Ratio Tolerances (R1 Ref) (%) ± 0.05 ± 0.1 ± 0.1 ± 0.5 Model + Pin count 694 100 699 50 698 50 Resistance Code5 Resistance Tolerance Code Packaging Options (Unit Count/Tube) Standard values follow E96 table. Character “K” denotes a multiplier of 1000. BI Technologies Corporation Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 3 of 3 BI technologies  Standard values follow E96 table. Character “K” denotes a multiplier of 1000. Accuracy Code at 25° C A B D F Absolute Resistance Tolerances (%) ±0.1 ±0.1 ±0.5 ±1.0 Ratio Tolerances (R1 Ref) (%) ±0.05 ±0.1 ±0.1 ±1.0 Model + Pin count 694 100 699 50 698 50 5 Consult customer service for custom designs and features. 69 4 -3-R10K A LF Model Series: 69 = Passivated Nichrome on Ceramic Number of Leads: 4= 8 leads 9=14 leads 8=16 leads Lead Finish: No Code = SnPb LF = Lead free (RoHS) Tolerance Code Resistance Value Circuit Type: 1=Bussed 3=Isolated 6=Binary (Only available as 694 model with B tolerance) 7=Decade (Only available as 694 model with B tolerance) 5 Consult customer service for custom designs and features.