4685993 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

■For T-groove cylinders without mounting accessories ■Optional accessories for mounting on other cylinder designs ■One-hand mounting possible ■Stable mounting ■Magneto-resistive sensor ■DC 3-wire, 10…30 VDC ■NC contact, PNP output ■Pigtail with male end, M8 x 1 Wiring diagram Functional principle Magnetic field sensors are activated by magnetic fields and are used, in particular, for the detection of the piston position in pneumatic cylinders. As magnetic fields can permeate non- magnetizable metals, they detect a permanent magnet attached to the piston through the aluminium cylinder wall.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|4 BIM-UNT-RP6X-0.2-PSG3M | 11/07/2023 15-31 | technical changes reserved Technical data Tightening torque fixing screw 0.4 Nm Electrical connection Cable with connector, M8 × 1 Cable quality Ø 3 mm, Gray, Lif9Y-11Y, PUR, 0.2 m Suited for E-ChainSystems® acc. to manufacturers declaration H1063M Core cross-section 3 x 0.14 mm Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP68 MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 Mounting on the following profiles Cylindrical design E N K F Switching state LED, Yellow Included in delivery cable clip

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|4 BIM-UNT-RP6X-0.2-PSG3M | 11/07/2023 15-31 | technical changes reserved Mounting instructions Mounting instructions/Description Thanks to the mounting lip, the sensor can be inserted into the groove from above with one hand. Mount the sensors as follows using the patented wing screw: The wing screw and the female thread feature a left-hand thread. Two small plastic lips keep the screw in position, ready-to-install. Turn the screw clockwise. The screw moves out of the thread and hits the upper grooves with the wings. The sensor is thus pressed down and locked in position. A few degrees up to approximately 1.5 turns of the screw with a slotted screwdriver (blade width 0.5 mm) or a 1.5 mm Allen key are sufficient to ensure vibration-proof fastening, depending on the shape of the slot. A tightening torque of

0.4 Nm is sufficient for safe mounting without

damaging the cylinder. The sensor can now withstand an axial and radial tensile load of F=100N applied on the cable. A cable clip is included in the scope of delivery. It enables smooth cable routing in the groove and ensures that the cable is fastened as securely as possible. The corresponding accessories for mounting on other cylindrical housings must be ordered separately. Accessories KLZCD2-UNT 6970418 Mounting bracket for mounting magnetic field sensors for T-grooves on a CleanDesign cylinder with mounting rail KLZ1-INT 6970410 Accessories for mounting the sensors BIM-INT and BIM-UNT on tie-rod cylinders; cylinder diameter: 32… 40 mm; material: Aluminum; further mounting accessories for other cylinder diameters on request

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|4 BIM-UNT-RP6X-0.2-PSG3M | 11/07/2023 15-31 | technical changes reserved KLZ2-INT 6970411 Accessories for mounting the sensors BIM-INT and BIM-UNT on tie-rod cylinders; Cylinder diameter: 50… 63 mm; material: Aluminium; Further mounting accessories for other cylinder diameters on request UNT-STOPPER 4685751 Accessories for finetuning the switchpoint on N T-groove cylinders; snap-locked in the BIM-UNT fixture; suited for multiple use; material: plastic KLRC-UNT1 6970626 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 8…25 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLRC-UNT2 6970627 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 25…63 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLRC-UNT3 6970628 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 63…130 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLRC-UNT4 6970629 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 130… 250 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLDT-UNT2 6913351 Mounting bracket for mounting magnetic field sensors on dovetail groove cylinders; groove width: 7 mm; material: PPS KLDT-UNT3 6913352 Mounting bracket for mounting magnetic field sensors on dovetail groove cylinders; groove width: 9.4 mm; material: PPS KLDT-UNT6 6913355 Mounting bracket for mounting magnetic field sensors on dovetail groove cylinders; groove width: 7.35 mm; material: PPS