4685730 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

■For T-groove cylinders without mounting accessories ■Optional accessories for mounting on other cylindrical housings. ■One-hand mounting possible ■Tool for fine adjustment and stopper for direct mounting on the sensor ■Stable mounting ■Optimally suited for monitoring two switching points on a cylinder ■No Y-splitter required ■Magneto-resistive sensor ■2x NO contacts, PNP output ■DC 4‐wire, 10…30 VDC Wiring diagram Functional principle Magnetic field sensors are activated by magnetic fields and are used, in particular, for the detection of the piston position in pneumatic cylinders. As magnetic fields can permeate non- magnetizable metals, they detect a permanent

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|4 BIM-UNT-0.3-UNT-2AP6X3-H1141 | 11/07/2023 15-26 | technical changes reserved Technical data Tightening torque fixing screw 0.4 Nm Electrical connection Connector, M12 × 1 Cable quality Ø 3 mm, Gray, Lif9Y-11Y, PUR, 0.3 m Suited for E-ChainSystems® acc. to manufacturers declaration H1063M Core cross-section 3 x 0.14 mm Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 Mounting on the following profiles Cylindrical design E N K F Power-on indication LED, Green Switching state 2 × LEDs, Yellow/yellow Included in delivery 2x cable clip magnet attached to the piston through the aluminium cylinder wall.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|4 BIM-UNT-0.3-UNT-2AP6X3-H1141 | 11/07/2023 15-26 | technical changes reserved Mounting instructions Mounting instructions/Description Insert sensor S2 from above; insert sensor S1 laterally in the groove with the tip first, then click-in. Mount the sensors as follows using the patented wing screw: The wing screw features a left-hand female thread. Two small plastic lips keep the screw in position, ready-to-install. Turn the screw clockwise. The screw moves out of the thread and hits the upper grooves with the wings. The sensor is thus pressed down and locked. Use a standard screw driver or a 1.5 mm Allen key to fasten the screw with a quarter turn. A fixing torque of 0.4 Nm is sufficient for safe mounting without damaging the cylinder. The sensor now withstands axial and radial tensile load of F=100N applied on the cable. Cable clips are included in the scope of delivery. They enable smooth cable routing in the groove. Mounting accessories for other cylinder sizes have to be ordered separately. Accessories KLZCD2-UNT 6970418 Mounting bracket for mounting magnetic field sensors for T-grooves on a CleanDesign cylinder with mounting rail KLZ1-INT 6970410 Accessories for mounting the sensors BIM-INT and BIM-UNT on tie-rod cylinders; cylinder diameter: 32… 40 mm; material: Aluminum; further mounting accessories for other cylinder diameters on request

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|4 BIM-UNT-0.3-UNT-2AP6X3-H1141 | 11/07/2023 15-26 | technical changes reserved KLZ2-INT 6970411 Accessories for mounting the sensors BIM-INT and BIM-UNT on tie-rod cylinders; Cylinder diameter: 50… 63 mm; material: Aluminium; Further mounting accessories for other cylinder diameters on request UNT-STOPPER 4685751 Accessories for finetuning the switchpoint on N T-groove cylinders; snap-locked in the BIM-UNT fixture; suited for multiple use; material: plastic KLRC-UNT1 6970626 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 8…25 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLRC-UNT2 6970627 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 25…63 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLRC-UNT3 6970628 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 63…130 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLRC-UNT4 6970629 Mounting bracket for mounting magnetic field sensors on round cylinders; cylinder diameter: 130… 250 mm; material: PA 6I/6T / nickel silver; fire-hazard classification acc. to UL94 - V2 KLDT-UNT2 6913351 Mounting bracket for mounting magnetic field sensors on dovetail groove cylinders; groove width: 7 mm; material: PPS KLDT-UNT3 6913352 Mounting bracket for mounting magnetic field sensors on dovetail groove cylinders; groove width: 9.4 mm; material: PPS KLDT-UNT6 6913355 Mounting bracket for mounting magnetic field sensors on dovetail groove cylinders; groove width: 7.35 mm; material: PPS