1610113 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Features
■Smooth sonic transducer face ■Cylindrical housing M30, potted ■Connection via M12 × 1 male connector ■Measuring range adjustable via Easy-Teach ■Temperature compensation ■Blind zone: 30 cm ■Range: 300 cm ■Resolution: 1 mm ■Aperture angle of sonic cone: ±15 ° ■1 × analog output, 0…10 V/additional switching output, PNP Wiring diagram Functional principle Ultrasonic sensors capture a multitude of objects contactlessly and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or non-metallic, firm, liquid or powdery. Even environmental conditions such as spray, dust or rain hardly affect their function. The sonic cone diagram indicates the detection range of the sensor. In accordance with standard EN 60947-5-7, quadratic targets in a range of sizes (20 × 20 mm, 100 × 100 mm) and a round rod with a diameter of 27 mm are used. Important: The detection ranges for other targets may differ from those for standard targets due to the different reflection properties and geometries. Sonic Cone
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|4 RU300U-M30E-LU8X2-H1151 | 11/17/2023 11-29 | technical changes reserved Technical data Output function Analog output Output 1 Analog output Voltage output 0…10 V Load resistance voltage output ≥ 1 kΩ Switching frequency ≤ 3.3 Hz Short-circuit protection yes / Cyclic Reverse polarity protection yes Wire breakage protection yes Setting option Remote Teach Mechanical data Design Threaded barrel, M30 Radiation direction straight Dimensions Ø 30 x 75 mm Housing material Metal, CuZn, Nickel Plated Max. tightening torque of housing nut 75 Nm Transducer material Plastic, Epoxyd resin and PU foam Electrical connection Connector, M12 × 1, 5-wire Ambient temperature -25…+70 °C Storage temperature -40…+80 °C Pressure resistance 0.5…5 bar Protection class IP67 Switching state LED, Yellow Object detected LED, Green Tests/approvals MTTF 191 years acc. to SN 29500 (Ed. 99) 40 Declaration of conformity EN ISO/IEC EN 60947-5-7 Vibration resistance IEC 60068-2 Approvals CE cULus Mounting instructions Mounting instructions/Description Setting the limit values The ultrasonic sensor has an analog output with teachable measuring range. Teaching is implemented via the teach adapter. The green and yellow LEDs indicate whether the sensor has detected the object. Teach
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|4 RU300U-M30E-LU8X2-H1151 | 11/17/2023 11-29 | technical changes reserved Connect the TX1-Q20L60 teach adapter between the sensor and connection cable
- Position object for remote limit value
- Press the button against Ub for 2 - 7 seconds
- Position object for close limit value
- Press the button against Ub for 8 - 11 seconds Optional: Inversion of analog output
- Press the button for 12 - 17 seconds LED response Successful teaching is displayed with a fast flashing LED. Thereafter, the sensor automatically runs in normal operating mode. Unsuccessful teaching is indicated by the LED flashing alternately green and yellow. In normal operation, the two LEDs indicate the status of the sensor.
- Green: Object within the detection range, but not in the measuring range
- Yellow: Object is within the measuring range
- Off: Object outside the detection range or signal loss Accessories MW-30 6945005 Mounting bracket for threaded barrel sensors; material: Stainless steel A2 1.4301 (AISI 304) Wiring accessories Dimension drawing Type ID RKC4.5T-2/TEL 6625016 Connection cable, M12 female connector, straight, 5-pin, cable length: 2 m, jacket material: PVC, black; cULus approval WKC4.5T-2/TEL 6625028 Connection cable, M12 female connector, angled, 5-pin, cable length: 2 m, jacket material: PVC, black; cULus approval
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|4 RU300U-M30E-LU8X2-H1151 | 11/17/2023 11-29 | technical changes reserved Accessories Dimension drawing Type ID TX1-Q20L60 6967114 Teach adapter for inductive encoders, linear position, angle, ultrasonic and capacitive sensors