1536633 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

■Rectangular, aluminium / plastic ■Many mounting possibilities ■Measuring range indication via LED ■Immune to external magnetic fields ■Extremely short blind zones ■4-wire, 15…30 VDC ■Analog output ■0…10 V and 4…20 mA ■Male connector, M12 x 1 Wiring diagram Functional principle Linear position sensors operate on the Hall principle and accomplish simple control tasks. They provide an output signal proportional to the actuating magnet. The polarity of the magnet has no effect on the output signal. The outstanding features of these robust sensors are excellent repeatability, resolution and

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|5 WIM200-Q25L-LIU5X2-H1141 | 11/07/2023 15-33 | technical changes reserved Technical data Mechanical data Design Profile, Q25L Dimensions 241 x 35 x 25 mm Housing material Aluminum/plastic, PA6-GF30 Active area material Plastic, PA6-GF30 Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -25…+75 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 131 years acc. to SN 29500 (Ed. 99) 40 Power-on indication LED, Green Measuring range display LED, yellow, positioning element in measuring range yellow flashing, no positioning element in measuring range after power reset linearity, excellent electromagnetic capability and a broad temperature range.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|5 WIM200-Q25L-LIU5X2-H1141 | 11/07/2023 15-33 | technical changes reserved Mounting instructions Mounting instructions/Description Numerous accessories allow the sensor to be mounted in various positions. Opposite to the active face, the sensor housing features a mounting groove for which sliding blocks are available. The lateral slot profiles can be used for mounting, too. When used with an external positioning element, the sensor can either be mounted with the active face located opposite or laterally to the mounting surface. Drilling slots guarantee highest flexibility for fine adjustment. The mounting accessories for linear position sensors can be adjusted to the respective cylinder sizes. The stainless steel accessories guarantee safe and robust mounting as well as highest flexibility. . Accessories M1-Q25L (2 PCS) 6901045 Mounting foot for linear position sensors LI-Q25L; material: aluminum; 2 pcs. per bag M2-Q25L 6901046 Mounting foot for linear position sensors LI-Q25L; material: aluminum; 2 pcs. per bag MB1-Q25 6901026 Mounting clip for linear position sensor Q25L; material Stainless steel; 2 pcs. per bag MB2.1-Q25(4PCS) 6901027 Mounting bracket for linear position sensors Q25L for mounting on pneumatic cylinders (40…60 mm); material: Stainless steel; 4 pcs. per bag

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|5 WIM200-Q25L-LIU5X2-H1141 | 11/07/2023 15-33 | technical changes reserved MB2.2-Q25(4PCS) 6901028 Mounting bracket for linear position sensors Q25L, for mounting on pneumatic cylinders (70…120 mm); material: Stainless steel; 4 pcs. per bag M4-Q25L 6901048 Mounting bracket and sliding block for linear position sensors LI-Q25L; material: Stainless steel; 2 pcs. per bag MN-M4-Q25 6901025 Sliding block with M4 thread for the backside profile of the LI-Q25L; material: galvanized steel; 10 pcs. per bag MN-M5-Q25 6901039 Sliding block with M5 thread for the backside profile of the LI-Q25L; material Stainless steel; 10 pcs. per bag DM-Q12 6900367 Actuator, rectangular, plastic, attainable switching distance 58 mm on BIM-(E)M12 magnetic field sensors or 49 mm on BIM-EG08 magnetic field sensors; for Q25L linear position sensors: recommended distance between the sensor and magnet: 3…5 mm DMR15-6-3 6900216 Actuation magnet, Ø 15 mm (Ø 3 mm), h: 6 mm; attainable switching distance 36 mm on BIM-(E)M12 magnetic field sensors or 32 mm on BIM-EG08 magnetic field sensors; for Q25L linear position sensors: recommended distance between the sensor and magnet: 3…4 mm DMR20-10-4 6900214 Actuation magnet; Ø 20 mm (Ø 4 mm), h: 10 mm; attainable switching distance 59 mm on BIM-(E)M12 magnetic field sensors or 50 mm on BIM-EG08 magnetic field sensors; for Q25L linear position sensors: recommended distance between the sensor and magnet: 3…4 mm DMR31-15-5 6900215 Actuation magnet, Ø 31 mm (Ø 5 mm), h: 15 mm; attainable switching distance 90 mm on BIM-(E)M12 magnetic field sensors or 78 mm on BIM-EG08 magnetic field sensors; for Q25L linear position sensors: recommended distance between the sensor and magnet: 3…5 mm P1-WIM-Q25L 6901088 Guided positioning element for WIM- Q25L, inserted in the sensor groove.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 5|5 WIM200-Q25L-LIU5X2-H1141 | 11/07/2023 15-33 | technical changes reserved Wiring accessories Dimension drawing Type ID RKC4.4T-2/TEL 6625013 Connection cable, M12 female connector, straight, 4-pin, cable length: 2 m, jacket material: PVC, black; cULus approval RKC4.301T-0.15-RSC4.334T/TXL 6631382 Extension cable, M12 female/male, straight, 4-pin, cable length: 0.15m, jacket material: PUR, black; cULus approval; Adapter cable for sensors with analog output on pin 2, for connection to analog inputs of fieldbus modules with 4-wire technology