100002205 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

■Rectangular, DSU35 design ■Plastic, PP-GF30-VO ■Detection of angular range from 0° to 360° ■Positioning element P4-Ri-DSU35 included in delivery ■Measuring range displayed via LED ■Programmable measuring range ■Immune to electromagnetic interference ■Resolution, 12-bit ■15…30 VDC ■0…10 V and 4…20 mA ■Male M12 x 1, 5-pin Wiring diagram Functional principle Inductive measuring principle provides more safety Based on the functional principle of RLC coupling, the sensor operates absolutely wear-free and is immune to magnetized metal splinters and other interference fields. Owing to the differential analysis, the output signal remains almost unchanged, even if the position of the positioning element deviates from the ideal axis of rotation.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|4 RI360P4-DSU35-ELIU5X2-H1151 | 11/07/2023 15-41 | technical changes reserved Technical data Sample rate 500 Hz Current consumption < 50 mA Mechanical data Design Dual sensor for valve monitoring, DSU35 Dimensions 74 x 60 x 35.4 mm Flange type Flange without mounting element Housing material Plastic, PP-GF30 Housing material, positioning element plastic, PA66 + PA6I/6T-GF40 Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -25…+75 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP68 IP69K MTTF 138 years acc. to SN 29500 (Ed. 99) 40 Power-on indication LED, Green Measuring range display multifunction LED, green Included in delivery Positioning element P4-Ri-DSU35, two set screws M5 × 12; two cylinder screws M5 × 12, two lock washers A5

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|4 RI360P4-DSU35-ELIU5X2-H1151 | 11/07/2023 15-41 | technical changes reserved Mounting instructions Mounting instructions/Description Ri-DSU35 for mounting on rotary actuators The Ri-DSU35 angle sensor and the well- established Ni4-DSU35 inductive dual sensor are identical in construction. The user also profits from the enormous mounting flexibility of the device. The sensor can be mounted on all standard rotary actuators with a shaft diameter of max.14 mm thanks to an extensive range of available accessories. For larger shaft diameters use the BTS-DSU35-Z02 accessories. LED function Operating voltage Green:Power on Measuring range Green:Positioning element is in the measuring range Green flashing:Positioning element is in the measuring range, signal low (e.g. distance too large) LED OFF:Positioning element is outside the detection range

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|4 RI360P4-DSU35-ELIU5X2-H1151 | 11/07/2023 15-41 | technical changes reserved Individual (teaching with positioning element) Bridge pin between teach input Pin 5 (GY) Gnd Pin 3 (BU) Ub Pin 1 (BN) LED 2 s start value end value status LED flashes then turns steady after 2 s 10 s CCW rotation, then return to last preset value CW rotation, then return to last preset value after 10 s status LED flashes fast for 2 s 15 s - default setting (360°, CW) after 15 s power and status LED alternate Preset – Mode (teaching without positioning element) Bridge pin between teach input Pin 5 (GY) Gnd Pin 3 (BU) Ub Pin 1 (BN) LED 2 s activate preset mode activate preset mode status LED steady, flashes after 2 s 10 s CCW rotation, then return to last preset value CW rotation, then return to last preset value after 10 s status LED flashes fast for 2 s 15 s - default setting (360°, CW) after 15 s power and status LED alternate Angular range Gnd Ub Status LED Pin 3 (BU) Pin 1 (BN) 30° press once - 1 x flashing 45° press twice - 2 x flashing 60° press three times - 3 x flashing 90° - press once 1 x flashing 180° - press twice 2 x flashing 270° - press three times 3 x flashing 360° - press four times 4 x flashing Accessories BTS-DSU35-Z01 6900229 Mounting kit for dual sensors for larger rotary actuators; Ø spacer plate and snap ring: max. 65 mm; hole pattern on receptacle surface: 30 x 80 mm (30 x 130 mm); connection shaft (shaft extension) height: 20 mm/ Ø: max. 30 mm BTS-DSU35-Z02 6900230 Mounting kit for dual sensors for larger rotary actuators; Ø spacer plate and snap ring: max. 65 mm; hole pattern on receptacle surface: 30 x 80 mm (30 x 130 mm); connection shaft (shaft extension) height: 20 mm (30 mm)/Ø: max. 40 mm BTS-DSU35-Z03 6900231 Mounting kit for dual sensors for larger rotary actuators; Ø spacer plate and snap ring: max. 110 mm; hole pattern on receptacle surface: 30 x 130 mm; connection shaft (shaft extension) height: 30 mm/Ø: max. 70 mm BTS-DSU35-Z07 6900403 Mounting kit for dual sensors for larger rotary actuators; Ø spacer plate and snap ring: max. 110 mm; hole pattern on receptacle surface: 30 x 130 mm; connection shaft (shaft extension) height: 50 mm/Ø: max. 75 mm P4-RI-DSU35 100002204

  • Mounting on shaft extension 5/8'' using set screw P1-RI-DSU35 6901086 Positioning element for angle sensors RI-DSU35• Mounted via M6 × 25 countersunk screw