68HC08KL8

68HC08KL8 FREESCALE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 256

Technical content

REV. 2.0 68HC08KL8 General Release Specification August 10, 1998 Personal and PC Media Division Austin, Texas Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification General Release Specification MC68HC08KL8 — Rev. 2.0 was negligent regarding the design or manufacture of the part. © Motorola, Inc., 1998 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification List of Sections NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 List of Sections Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED List of Sections General Release Specification MC68HC08KL8 — Rev. 2.0 List of Sections Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Table of Contents NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Table of Contents Section 1. General Description

1.5.1 Power Supply Pins (VDDREG , VSSREG , VDD1 ,

1.5.11 Port E I/O Pins (PTE6–PTE3 and PTE2/TCH1,

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Table of Contents General Release Specification MC68HC08KL8 — Rev. 2.0 Table of Contents Section 2. Memory Map Section 3. Random-Access Memory (RAM) Section 4. Read-Only Memory (ROM) Section 5. Mask Option Register (MOR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Table of Contents NON-DISCLOSURE AGREEMENT REQUIRED Section 6. Central Processor Unit (CPU) Section 7. Oscillator Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Table of Contents General Release Specification MC68HC08KL8 — Rev. 2.0 Table of Contents Section 8. System Integration Module (SIM) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Table of Contents NON-DISCLOSURE AGREEMENT REQUIRED Section 9. Universal Serial Bus Module (USB) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Table of Contents General Release Specification MC68HC08KL8 — Rev. 2.0 Table of Contents Section 10. Monitor ROM (MON) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Table of Contents NON-DISCLOSURE AGREEMENT REQUIRED Section 11. Timer Interface Module (TIM) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Table of Contents General Release Specification MC68HC08KL8 — Rev. 2.0 Table of Contents Section 12. Input/Output Ports (I/O) Section 13. Computer Operating Properly (COP) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Table of Contents NON-DISCLOSURE AGREEMENT REQUIRED Section 14. External Interrupt (IRQ) Section 15. Keyboard Interrupt Module (KBI) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Table of Contents General Release Specification MC68HC08KL8 — Rev. 2.0 Table of Contents Section 16. Break Module (BREAK) Section 17. Electrical Specifications Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Table of Contents NON-DISCLOSURE AGREEMENT REQUIRED Section 18. Mechanical Specifications Section 19. Ordering Information Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Table of Contents General Release Specification MC68HC08KL8 — Rev. 2.0 Table of Contents Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification List of Figures NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 List of Figures Figure Title Page Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED List of Figures General Release Specification MC68HC08KL8 — Rev. 2.0 List of Figures Figure Title Page 9-14 Differential Input Sensitivity Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification List of Figures NON-DISCLOSURE AGREEMENT REQUIRED Figure Title Page 9-30 USB Endpoint 1/Endpoint 2 Data Register 9-34 IN Token Data Flow for Transmit 11-7 TIM Channel Status and Control Registers Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED List of Figures General Release Specification MC68HC08KL8 — Rev. 2.0 List of Figures Figure Title Page Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification List of Tables NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 List of Tables Table Title Page Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED List of Tables General Release Specification MC68HC08KL8 — Rev. 2.0 List of Tables Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification General Description NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 1. General Description

1.1 Contents

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Description General Release Specification MC68HC08KL8 — Rev. 2.0 General Description

1.2 Introduction

The MC68HC08KL8 is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units (MCUs). The M68HC08 Family is based on the customer-specified integrated circuit (CSIC) design strategy. All MCUs in the family use the enhanced M68HC08 central processor unit (CPU08) and are available with a variety of modules, memory sizes and types, and package types.

1.3 Features

Features of the MC68HC08KL8 include:

• High-Performance M68HC08 Architecture
• Fully Upward-Compatible Object Code with M6805, M146805, and M68HC05 Families
• 1.5-MHz Internal Bus Operation
• Eight Kbytes of On-Chip Read-Only Memory (ROM)
• On-Chip Programming Firmware for Use with Host Personal Computer
• ROM Data Security1
• 368 Bytes of On-Chip Random Access Memory (RAM)
• 39 General-Purpose Input/Output (I/O) Ports, 24 with Software Configurable Pullups
• 16-Bit, 2-Channel Timer Interface Module (TIM)
• 8-Bit Keyboard Interrupt (KBI) Port
• Available in a 52-lead plastic quad flat pack (QFP) package: – 39 general-purpose input/output (I/O), 24 with software configurable pullups – 16-bit, 2-channel timer interface module (TIM) – Eight light-emitting diode (LED) direct drive port pins 1. No security feature is absolutely secure. However, Motorola’s strategy is to make reading or copying the EPROM/OTPROM difficult for unauthorized users. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Features

MC68HC08KL8 — Rev. 2.0 General Release Specification General Description NON-DISCLOSURE AGREEMENT REQUIRED

• Available in a 42-lead shrink dual in-line plastic (SDIP) package: – 29 general-purpose input/output (I/O), 21 with software configurable pullups – Five light-emitting diode (LED) direct drive port pins
• Full Compatibility withUniversal Serial Bus (USB) Specification Rev. 1.0 – Supports Non-Isochronous Data – Bidirectional Half-Duplex Link – 1.5 Mbps Data Rate (Low Speed)
• On-Chip USB Transceiver
• On-Chip 3.3-V Regulator for USB Transceiver
• USB Data Control Logic – Packet Decoding/Generation – CRC Generation and Checking – Non-Return-to-Zero Inverted (NRZI) Encoding/Decoding and Bit-Stuffing
• Two 8-Byte Transmit Buffers – One Dedicated for Endpoint 0 – One Shared by Endpoint 1 and Endpoint 2
• One 8-Byte Receive Buffer – Dedicated for Control Endpoint 0
• USB Suspend/Resume Operation
• System Protection Features – Optional Computer Operating Properly (COP) Reset – Illegal Opcode Detection with Optional Reset – Illegal Address Detection with Optional Reset
• Low-Power Design, Fully Static with Stop Mode and Wait Mode
• Master Reset Pin with Internal Pullup and Power-On Reset
• External Asynchronous Interrupt Pin with Internal Pullup (IRQ1) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Description General Release Specification MC68HC08KL8 — Rev. 2.0 General Description Features of the CPU08 include:

• Enhanced HC05 Programming Model
• Extensive Loop Control Functions
• 16 Addressing Modes (Eight More Than the HC05)
• 16-Bit Index Register and Stack Pointer
• Memory-to-Memory Data Transfers
• Fast 8× 8 Multiply Instruction
• Fast 16/8 Divide Instruction
• Binary-Coded Decimal (BCD) Instructions
• Optimization for Controller Applications
• Third Party C Language Support

1.4 MCU Block Diagram

Figure 1-1 shows the structure of the MC68HC08KL8. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification General Description General Description MCU Block Diagram NON-DISCLOSURE AGREEMENT REQUIRED Figure 1-1. MCU Block Diagram SYSTEM INTEGRATION MODULE TIMER INTERFACE MODULE** POWER-ON RESET MODULE COMPUTER OPERATING PROPERLY MODULE ARITHMETIC/LOGIC UNIT (ALU) CPU REGISTERS M68HC08 CPU CONTROL AND STATUS REGISTERS — 64 BYTES USER EPROM — 8,192 BYTES USER RAM — 368 BYTES MONITOR ROM — 240 BYTES USER EPROM VECTOR SPACE — 16 BYTES IRQ MODULE POWER PTA DDRA DDRE PTE INTERNAL BUS OSC1 OSC2 *RST *IRQ1/VPP VDD1 VSS1 VDDREG PTA7–PTA0 † PTE4 PTE3 PTE2/TCH1 PTE1/TCH0 PTE0/TCLK** VSSREG PTB DDRB PTB7–PTB0 † PTD DDRD PTD7/KBD7– PTD0/KBD0 USB MODULE D+ D-USB ENDPOINT 0, 1, 2 (2-Tx/1-Rx BUFFER) USB REGULATOR REGOUT 3.3 V † Ports are software configurable with pullup device if input port. ‡ Software configurable LED direct drive 3 mA source /10 mA sink or standard drive * Pin contains integrated pullup device Available in 52-lead QFP only LS USB TRANSCEIVER VDD2 VSS2 BREAK MODULE OSCILLATOR PTC DDRC PTC4–PTC0 † ‡ PTE6 PTE5** Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Description General Release Specification MC68HC08KL8 — Rev. 2.0 General Description

1.5 Pin Assignments

Figure 1-2 shows the 52-pin QFP assignments andFigure 1-3 shows the 42-pin SDIP assignments. Figure 1-2. 52-Pin QFP Assignments (Top View) VDD2 PTB2 PTE6 PTE5 PTE4 PTE3 PTE2/TCH1 PTE1/TCH0 REGOUT VSSREG VDDREG PTD0/KBD0 PTD1/KBD1 PTA1 PTA0 PTB7 PTB6 PTB5 PTB4 PTB3 PTB1 PTB0 VDD1 VSS1 PTC7 PTA7 PTA6 PTA5 PTA4 PTA3 PTA2 PTE0/TCLK IRQ1 RST OSC1 OSC2 VSS2 PTD3/KBD3 PTD2/KBD2 PTD4/KBD4 PTD5/KBD5 PTD6/KBD6 PTD7/KBD7 PTC0 PTC1 PTC2 PTC3 PTC4 PTC5 PTC6 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification General Description NON-DISCLOSURE AGREEMENT REQUIRED Figure 1-3. 42-Pin SDIP Pin Assignments PTA7 1 VDD2 VSS2 OSC2 OSC1 RST IRQ1 REGOUT VSSREG VDDREG PTD0/KBD0 PTD1/KBD1 PTD2/KBD2 PTD3/KBD3 PTD4/KBD4 PTD5/KBD5 PTD6/KBD6 PTD7/KBD7 PTC2 PTC3 PTC4 VSS1 VDD1 PTB0 PTB1 PTB2 PTB3 PTB4 PTB5 PTB6 PTB7 PTA0 PTA1 PTA2 PTA3 PTA4 PTA5 PTA6 21 22PTC0 PTC1 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Description General Release Specification MC68HC08KL8 — Rev. 2.0 General Description

1.5.1 Power Supply Pins (VDDREG, VSSREG, VDD1, VSS1, VDD2, and VSS2)

VDDREG and VSSREG are the power supply and ground pins used by the on-board regulator. In regulator bypass, these become the supply pins for the USB transceiver. VDD1 ,VSS1 ,VDD2 , and VSS2 are the power supply and ground pins. The MCU operates from a single power supply. Fast signal transitions on MCU pins place high, short-duration current demands on the power supply. To prevent noise problems, take special care to provide power supply bypassing at the MCU asFigure 1-4 shows. Place the bypass capacitors as close to the MCU power pins as possible. Use high-frequency-response ceramic capacitors for CBypass. C Bulkare optional bulk current bypass capacitors for use in applications that require the port pins to source high current levels. Figure 1-4. Power Supply Bypassing MCU VDD CBulk CBypass 0.1 µF VSSREG ,VSS1 , VSS2 NOTE: Component values shown represent typical applications. VDDREG , VDD1 , VDD2 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification General Description NON-DISCLOSURE AGREEMENT REQUIRED

1.5.2 Voltage Regulator Out (REGOUT)

REGOUT is the 3.3-V output of the on-chip voltage regulator. It is used to supply the voltage for the external pullup resistor required on the USB’s D– line. REGOUT also is used internally for the USB data driver. The REGOUT pin requires an external bulk capacitor 1µF or larger and a 0.1-µF ceramic bypass capacitor asFigure 1-5 shows. Place the bypass capacitors as close to the REGOUT pin as possible. (See Section 9. Universal Serial Bus Module (USB).) Figure 1-5. Regulator Supply Capacitor Configuration

1.5.3 Oscillator Pins (OSC1 and OSC2)

The OSC1 and OSC2 pins are the connections for the on-chip oscillator circuit. (SeeSection 7. Oscillator.)

1.5.4 External Reset Pin (RST)

A logic 0 on theRST pin forces the MCU to a known startup state.RST is bidirectional, allowing a reset of the entire system. It is driven low when any internal reset source is asserted. TheRST pin contains an internal pullup device. (SeeSection 8. System Integration Module (SIM).) MCU VREGOUT CRegbulk CRegbypass 0.1 µF VSSREG REGOUT > 1 µF Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Description General Release Specification MC68HC08KL8 — Rev. 2.0 General Description

1.5.5 External Interrupt Pin (IRQ1)

IRQ1 is an asynchronous external interrupt pin. TheIRQ1 pin contains an internal pullup device. (SeeSection 14. External Interrupt (IRQ).)

1.5.6 USB Data Pins (D+ and D–)

D+ and D– are the differential data lines used by the USB module. (See Section 9. Universal Serial Bus Module (USB).)

1.5.7 Port A Input/Output (I/O) Pins (PTA7–PTA0)

PTA7–PTA0 are general-purpose bidirectional I/O port pins. (See Section 12. Input/Output Ports (I/O).) Each pin contains a software configurable pullup device when the pin is configured as an input. (See 12.8 Port Options.)

1.5.8 Port B (I/O) Pins (PTB7–PTB0)

PTB7–PTB0 are general-purpose bidirectional I/O port pins. (See Section 12. Input/Output Ports (I/O).) Each pin contains a software configurable pullup device when the pin is configured as an input. (See 12.8 Port Options.)

1.5.9 Port C I/O Pins (PTC7–PTC0)

PTC7–PTC0 are general-purpose bidirectional I/O port pins. (See Section 12. Input/Output Ports (I/O).) Port C pins are software configurable to be LED direct drive ports. Each pin contains a software configurable pullup device when the pin is configured as an input. (See 12.8 Port Options.) NOTE: On the 42-lead SDIP package the PTC7–PTC5 pads are not bonded out. Set these ports to output to avoid floating inputs. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification General Description NON-DISCLOSURE AGREEMENT REQUIRED

1.5.10 Port D I/O Pins (PTD7/KBD7–PTD0/KBD0)

PTD7/KBD7–PTD0/ KBD0 are general-purpose bidirectional I/O port pins. (SeeSection 12. Input/Output Ports (I/O).) Any or all of the port D pins can be programmed to serve as external interrupt pins. (See Section 15. Keyboard Interrupt Module (KBI).)

1.5.11 Port E I/O Pins (PTE6–PTE3 and PTE2/TCH1, PTE1/TCH0, PTE0/TCLK)

Port E is a 7-bit special function port that shares three of its pins with the timer interface module. (Section 11. Timer Interface Module (TIM)and Section 12. Input/Output Ports (I/O).) NOTE: On the 42-lead SDIP package the port E pads are not bonded out. Set these ports to output to avoid floating inputs. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Description General Release Specification MC68HC08KL8 — Rev. 2.0 General Description Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Memory Map NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 2. Memory Map

2.1 Contents

2.2 Introduction

The CPU08 can address 64 Kbytes of memory space. The memory map, shown inFigure 2-1, includes:

• Eight Kbytes of read-only memory (ROM)
• 368 bytes of RAM
• 16 bytes of user-defined vectors
• 240 bytes of monitor ROM Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Memory Map General Release Specification MC68HC08KL8 — Rev. 2.0 Memory Map $0000 $003F I/O REGISTERS, 64 BYTES $0040 $01AF RAM, 368 BYTES $01B0 $DDFF UNIMPLEMENTED 56,400 BYTES $DE00 $FDFF ROM, 8,192 BYTES $FE00 BREAK STATUS REGISTER (BSR) $FE01 RESET STATUS REGISTER (RSR) $FE02 RESERVED $FE03 BREAK FLAG CONTROL REGISTER (BFCR) $FE04 INTERRUPT STATUS REGISTER 1 (INT1) $FE05 INTERRUPT STATUS REGISTER 2 (INT2) $FE06 RESERVED $FE07 $FE0B RESERVED, 4 BYTES $FE0C BREAK ADDRESS HIGH REGISTER (BRKH) $FE0D BREAK ADDRESS LOW REGISTER (BRKL) $FE0E BREAK STATUS AND CONTROL REGISTER (BSCR) $FE0F RESERVED $FE10 $FEFF MONITOR ROM, 240 BYTES $FF00 $FFEF UNIMPLEMENTED, 240 BYTES $FFF0 $FFFF VECTORS, 16 BYTES Figure 2-1. Memory Map Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output (I/O) Section MC68HC08KL8 — Rev. 2.0 General Release Specification Memory Map NON-DISCLOSURE AGREEMENT REQUIRED

2.3 Input/Output (I/O) Section

Addresses $0000–$003F contain most of the control, status, and data registers. Additional I/O registers have these addresses:

• $FE00 (break status register, BSR)
• $FE01 (reset status register, RSR)
• $FE03 (break flag control register, BFCR)
• $FE04 (interrupt status register 1, INT1)
• $FE05 (interrupt status register 2, INT2)
• $FE0C and $FE0D (break address registers, BRKH and BRKL)
• $FE0E (break status and control register, BSCR)
• $FFFF (COP control register, COPCTL)

2.4 Unimplemented Memory Locations

Some addresses are unimplemented. Accessing an unimplemented address can cause an illegal address reset if illegal address resets are enabled. In the memory map and in the I/O register summary, unimplemented addresses are shaded. Some I/O bits are read-only: the write function is unimplemented. Writing to a read-only I/O bit has no effect on MCU operation. In register figures, the write function of read-only bits is shaded.

2.5 Reserved Memory Locations

Some addresses are reserved. Writing to a reserved address can have unpredictable effects on MCU operation. In the memory map and in the I/O register summary, reserved addresses are marked with the word Reserved. Some I/O bits are reserved. Writing to a reserved bit can have unpredictable effects on MCU operation. In register figures, reserved bits are marked with the letter R. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Memory Map General Release Specification MC68HC08KL8 — Rev. 2.0 Memory Map Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 $0000 Port A Data Register (PTA) Read: PTA7 PTA6 PTA5 PTA4 PTA3 PTA2 PTA1 PTA0 Write: Reset: Unaffected by Reset $0001 Port B Data Register (PTB) Read: PTB7 PTB6 PTB5 PTB4 PTB3 PTB2 PTB1 PTB0 Write: Reset: Unaffected by Reset $0002 Port C Data Register (PTC) Read: PTC7 PTC6 PTC5 PTC4 PTC3 PTC2 PTC1 PTC0 Write: Reset: Unaffected by Reset $0003 Port D Data Register (PTD) Read: PTD7 PTD6 PTD5 PTD4 PTD3 PTD2 PTD1 PTD0 Write: Reset: Unaffected by Reset $0004 Data Direction Register A (DDRA) Read: DDRA7 DDRA6 DDRA5 DDRA4 DDRA3 DDRA2 DDRA1 DDRA0 Write: Reset: 0 0 0 0 0 0 0 0 $0005 Data Direction Register B (DDRB) Read: DDRB7 DDRB6 DDRB5 DDRB4 DDRB3 DDRB2 DDRB1 DDRB0 Write: Reset: 0 0 0 0 0 0 0 0 $0006 Data Direction Register C (DDRC) Read: DDRC7 DDRC6 DDRC5 DDRC4 DDRC3 DDRC2 DDRC1 DDRC0 Write: Reset: 0 0 0 0 0 0 0 0 $0007 Data Direction Register D (DDRD) Read: DDRD7 DDRD6 DDRD5 DDRD4 DDRD3 DDRD2 DDRD1 DDRD0 Write: Reset: 0 0 0 0 0 0 0 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 1 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Memory Map NON-DISCLOSURE AGREEMENT REQUIRED $0008 Port E Data Register (PTE) Read: 0 PTE6 PTE5 PTE4 PTE3 PTE2 PTE1 PTE0 Write: Reset: Unaffected by Reset $0009 Unimplemented Read: Write: $000A Unimplemented Read: Write: $000B Unimplemented Read: Write: $000C Data Direction Register E (DDRE) Read: 0 DDRE6 DDRE5 DDRE4 DDRE3 DDRE2 DDRE1 DDRE0 Write: Reset: 0 0 0 0 0 0 0 0 $000D Keyboard Status and Control Register (KBSCR) Read: 0 0 0 0 KEYF 0 IMASKK MODEK Write: ACKK Reset: 0 0 0 0 0 0 0 0 $000E Keyboard Interrupt Enable Register (KBIER) Read: KBIE7 KBIE6 KBIE5 KBIE4 KBIE3 KBIE2 KBIE1 KBIE0 Write: Reset: 0 0 0 0 0 0 0 0 $000F Port Option Control Register (POC) Read: 0 0 LDD PCP PBP PAP Write: Reset: 0 0 1 0 0 0 0 0 $0010 TIM Status and Control Register (TSC) Read: TOF TOIE TSTOP PS2 PS1 PS0 Write: 0 TRST Reset: 0 0 1 0 0 0 0 0 $0011 Unimplemented Read: Write: Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 2 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Memory Map General Release Specification MC68HC08KL8 — Rev. 2.0 Memory Map $0012 TIM Counter Register High (TCNTH) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: 0 0 0 0 0 0 0 0 $0013 TIM Counter Register Low (TCNTL) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: 0 0 0 0 0 0 0 0 $0014 TIM Counter Modulo Register High (TMODH) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: 1 1 1 1 1 1 1 1 $0015 TIM Counter Modulo Register Low (TMODL) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: 1 1 1 1 1 1 1 1 $0016 TIM Channel 0 Status and Control Register (TSC0) Read: CH0F CH0IE MS0B MS0A ELS0B ELS0A TOV0 CH0MAX Write: 0 Reset: 0 0 0 0 0 0 0 0 $0017 TIM Channel 0 Register High (TCH0H) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: Indeterminate after Reset $0018 TIM Channel 0 Register Low (TCH0L) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: Indeterminate after Reset $0019 TIM Channel 1 Status and Control Register (TSC1) Read: CH1F CH1IE MS1A ELS1B ELS1A TOV1 CH1MAX Write: 0 Reset: 0 0 0 0 0 0 0 0 $001A TIM Channel 1 Register High (TCH1H) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: Indeterminate after Reset Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 3 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Memory Map NON-DISCLOSURE AGREEMENT REQUIRED $001B TIM Channel 1 Register Low (TCH1L) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: Indeterminate after Reset $001C Unimplemented Read: Write: $001D Unimplemented Read: Write: $001E IRQ Status and Control Register (ISCR) Read: 0 0 0 0 IRQF1 0 IMASK1 MODE1 Write: ACK1 Reset: 0 0 0 0 0 0 0 0 $001F Mask Option Register (MOR) Read: R REGBP R ROMSEC SSREC COPRS STOP COPD Write: Reset: Unaffected by Reset $0020 USB Endpoint 0 Data Register 0 (UE0D0) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0021 USB Endpoint 0 Data Register 1 (UE0D1) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0022 USB Endpoint 0 Data Register 2 (UE0D2) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0023 USB Endpoint 0 Data Register 3 (UE0D3) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 4 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Memory Map General Release Specification MC68HC08KL8 — Rev. 2.0 Memory Map $0024 USB Endpoint 0 Data Register 4 (UE0D4) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0025 USB Endpoint 0 Data Register 5 (UE0D5) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0026 USB Endpoint 0 Data Register 6 (UE0D6) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0027 USB Endpoint 0 Data Register 7 (UE0D7) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0028 USB Endpoint 1/2 Data Register 0 (UE1D0) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $0029 USB Endpoint 1/2 Data Register 1 (UE1D1) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002A USB Endpoint 1/2 Data Register 2 (UE1D2) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002B USB Endpoint 1/2 Data Register 3 (UE1D3) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002C USB Endpoint 1/2 Data Register 4 (UE1D4) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 5 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Memory Map NON-DISCLOSURE AGREEMENT REQUIRED $002D USB Endpoint 1/2 Data Register 5 (UE1D5) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002E USB Endpoint 1/2 Data Register 6 (UE1D6) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002F USB Endpoint 1/2 Data Register 7 (UE1D7) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $0030 Unimplemented Read: Write: ↓ Unimplemented Read: Write: $0036 Unimplemented Read: Write: $0037 USB Control Register 2 (UCR2) Read: 0 0 TX1ST 0 ENABLE2 ENABLE1 STALL2 STALL1 Write: RSTFR TX1STR Reset: 0 0 0 0 0 0 0 0 $0038 USB Address Register (UADDR) Read: USBEN UADD6 UADD5 UADD4 UADD3 UADD2 UADD1 UADD0 Write: Reset: 0 0 0 0 0 0 0 0 $0039 USB Interrupt Register 0 (UIR0) Read: TXD0F RXD0F RSTF SUSPND TXD0IE RXD0IE Write: TXD0FR RXD0FR Reset: 0 0 0 0 0 0 0 0 $003A USB Interrupt Register 1 (UIR1) Read: TXD1F EOPF RESUMF 0 TXD1IE EOPIE Write: RESUMFR TXD1FR EOPFR Reset: 0 0 0 0 0 0 0 0 Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 6 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Memory Map General Release Specification MC68HC08KL8 — Rev. 2.0 Memory Map $003B USB Control Register 0 (UCR0) Read: T0SEQ STALL0 TX0E RX0E TP0SIZ3 TP0SIZ2 TP0SIZ1 TP0SIZ0 Write: Reset: 0 0 0 0 0 0 0 0 $003C USB Control Register 1 (UCR1) Read: T1SEQ ENDADD TX1E FRESUM TP1SIZ3 TP1SIZ2 TP1SIZ1 TP1SIZ0 Write: Reset: 0 0 0 0 0 0 0 0 $003D USB Status Register (USR) Read: RSEQ SETUP RPSIZ3 RPSIZ2 RPSIZ1 RPSIZ0 Write: Reset: X X X X X X $003E Unimplemented Read: Write: $003F Unimplemented Read: Write: $FE00 Break Status Register (BSR) Read: R R R R R R SBSW R Write: Reset: 0 $FE01 Reset Status Register (RSR) Read: POR PIN COP ILOP ILAD USB 0 0 Write: POR: 1 0 0 0 0 0 0 0 $FE02 Reserved Read: RRR R R RRR Write: $FE03 Break Flag Control Register (BFCR) Read: BCFE R R R R R R R Write: Reset: 0 Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 7 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Memory Map NON-DISCLOSURE AGREEMENT REQUIRED $FE04 Interrupt Status Register 1 (INT1) Read: IF6 IF5 IF4 IF3 IF2 IF1 0 0 Write: R R R R R R R R Reset: 0 0 0 0 0 0 0 0 $FE05 Interrupt Status Register 2 (INT2) Read: IF14 IF13 IF12 IF11 IF10 IF9 IF8 IF7 Write: R R R R R R R R Reset: 0 0 0 0 0 0 0 0 $FE06 Reserved Read: RRR R R RRR Write: $FE07 Unimplemented Read: Write: $FE08 Unimplemented Read: Write: $FE09 Unimplemented Read: Write: $FE0A Unimplemented Read: Write: $FE0B Unimplemented Read: Write: $FE0C Break Address Register High (BRKH) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: 0 0 0 0 0 0 0 0 $FE0D Break Address Register Low (BRKL) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: 0 0 0 0 0 0 0 0 Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 8 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Memory Map General Release Specification MC68HC08KL8 — Rev. 2.0 Memory Map $FE0E Break Status and Control Register (BRKSCR) Read: BRKE BRKA 0000 0 0 Write: Reset: 0 0 0 0 0 0 0 0 $FFFF COP Control Register (COPCTL) Read: Low Byte of Reset Vector Write: Writing Clears COP Counter (Any Value) Reset: Unaffected by Reset Addr. Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented R = Reserved X = Indeterminate Figure 2-2. Control, Status, and Data Registers (Sheet 9 of 9) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Memory Map NON-DISCLOSURE AGREEMENT REQUIRED Table 2-1 is a list of vector locations.

2.6 Monitor ROM

The 240 bytes at addresses $FE10–$FEFF are reserved ROM addresses that contain the instructions for the monitor functions. (See Section 10. Monitor ROM (MON).) Table 2-1. Vector Addresses Address Vector Low $FFF0 Keyboard Vector (High) $FFF1 Keyboard Vector (Low) $FFF2 TIM Overflow Vector (High) $FFF3 TIM Overflow Vector (Low) $FFF4 TIM Channel 1 Vector (High) $FFF5 TIM Channel 1 Vector (Low) $FFF6 TIM Channel 0 Vector (High) $FFF7 TIM Channel 0 Vector (Low) $FFF8 USB Vector (High) $FFF9 USB Vector (Low) $FFFA IRQ1 Vector (High) $FFFB IRQ1 Vector (Low) $FFFC SWI Vector (High) $FFFD SWI Vector (Low) High $FFFE Reset Vector (High) $FFFF Reset Vector (Low) Priority Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Memory Map General Release Specification MC68HC08KL8 — Rev. 2.0 Memory Map Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Random-Access Memory (RAM) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 3. Random-Access Memory (RAM)

3.1 Contents

3.2 Introduction

This section describes the 368 bytes of random-access memory (RAM).

3.3 Functional Description

Addresses $0040–$01AF are RAM locations. The location of the stack RAM is programmable. The 16-bit stack pointer allows the stack to be anywhere in the 64-Kbyte memory space. NOTE: For correct operation, the stack pointer must point only to RAM locations. Within page zero are 192 bytes of RAM. Because the location of the stack RAM is programmable, all page zero RAM locations can be used for I/O control and user data or code. When the stack pointer is moved from its reset location at $00FF, direct addressing mode instructions can access efficiently all page zero RAM locations. Page zero RAM, therefore, provides ideal locations for frequently accessed global variables. Before processing an interrupt, the CPU uses five bytes of the stack to save the contents of the CPU registers. NOTE: For M6805 Family compatibility, the H register is not stacked. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Random-Access Memory (RAM) General Release Specification MC68HC08KL8 — Rev. 2.0 Random-Access Memory (RAM) During a subroutine call, the CPU uses two bytes of the stack to store the return address. The stack pointer decrements during pushes and increments during pulls. NOTE: Be careful when using nested subroutines. The CPU may overwrite data in the RAM during a subroutine or during the interrupt stacking operation. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Read-Only Memory (ROM) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 4. Read-Only Memory (ROM)

4.1 Contents

4.2 Introduction

This section describes the 8 KBytes of read-only memory (ROM) and 16 bytes of user vectors.

4.3 Functional Description

An unprogrammed or erased location reads as $00. These addresses are user ROM locations:

• $DE00–$FDFF
• $FFF0–$FFFF (These locations are reserved for user-defined interrupt and reset vectors.) NOTE: A security feature prevents viewing of the ROM contents.1 1. No security feature is absolutely secure. However, Motorola’s strategy is to make reading or copying the ROM contents difficult for unauthorized users. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Read-Only Memory (ROM) General Release Specification MC68HC08KL8 — Rev. 2.0 Read-Only Memory (ROM) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Mask Option Register (MOR) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 5. Mask Option Register (MOR)

5.1 Contents

5.2 Introduction

This section describes the mask options and the mask option register (MOR). The mask options are hard-wired connections specified at the same time as the ROM code, which allow the user to customize the MCU. The MOR controls the enable or disable of the following functions:

• USB regulator bypass
• ROM security1
• Stop mode recovery time (32 or 4096 CGMXCLK cycles)
• COP timeout period (218 – 24 or 213 – 24 CGMXCLK cycles)
• STOP instruction
• Operation of the computer operating properly module (COP) 1. No security feature is absolutely secure. However, Motorola’s strategy is to make reading or copying the ROM difficult for unauthorized users. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Mask Option Register (MOR) General Release Specification MC68HC08KL8 — Rev. 2.0 Mask Option Register (MOR)

5.3 Functional Description

NOTE: Writing to a reserved address can have unpredictable effects on MCU operation. REGBP — Regulator Bypass Bit The REGBP causes the on-chip regulator to pass VDDREG to the REGOUT pin. 1 = VDDREG voltage applied to the REGOUT pin. 0 = Regulator output drives 3.3 volts on REGOUT pin. NOTE: The bypass mode is reserved for transceiver testing and should not be used in normal operation. ROMSEC — ROM Security Bit ROMSEC enables the ROM security feature. Setting the ROMSEC bit prevents reading of the ROM contents. Access to the ROM is denied to unauthorized users of customer specified software. 1 = ROM security enabled 0 = ROM security disabled SSREC — Short Stop Recovery Bit SSREC enables the CPU to exit stop mode with a delay of 32 CGMXCLK cycles instead of a 4096-CGMXCLK cycle delay. 1 = Stop mode recovery after 32 CGMXCLK cycles 0 = Stop mode recovery after 4096 CGMXCLK cycles Address: $001F Bit 7 654321 Bit 0 Read: R REGBP R ROMSEC SSREC COPRS STOP COPD Write: Reset: Unaffected by Reset = Unimplemented Figure 5-1. Mask Option Register (MOR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Mask Option Register (MOR) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Mask Option Register (MOR) NON-DISCLOSURE AGREEMENT REQUIRED NOTE: Exiting stop mode by pulling reset will result in the long stop recovery. If using an external crystal oscillator, do not set the SSREC bit. COPRS — COP Rate Select Bit COPRS selects the COP timeout period. Reset clears COPRS. (See Section 13. Computer Operating Properly (COP).) 1 = COP timeout period = 213 – 24 CGMXCLK cycles 0 = COP timeout period = 218 – 24 CGMXCLK cycles STOP — STOP Instruction Enable Bit STOP enables the STOP instruction. 1 = STOP instruction enabled 0 = STOP instruction treated as illegal opcode COPD — COP Disable Bit COPD disables the COP module. (SeeSection 13. Computer Operating Properly (COP).) 1 = COP module disabled 0 = COP module enabled Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Mask Option Register (MOR) General Release Specification MC68HC08KL8 — Rev. 2.0 Mask Option Register (MOR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 6. Central Processor Unit (CPU)

6.1 Contents

6.2 Introduction

This section describes the central processor unit (CPU). The M68HC08 CPU is an enhanced and fully object-code-compatible version of the M68HC05 CPU. The CPU08 Reference Manual (Motorola document number CPU08RM/AD) contains a description of the CPU instruction set, addressing modes, and architecture. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Central Processor Unit (CPU) General Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU)

6.3 Features

Features of the CPU include:

• Fully Upward, Object-Code Compatibility with M68HC05 Family
• 16-Bit Stack Pointer with Stack Manipulation Instructions
• 16-Bit Index Register with X-Register Manipulation Instructions
• 8-MHz CPU Internal Bus Frequency
• 64-Kbyte Program/Data Memory Space
• 16 Addressing Modes
• Memory-to-Memory Data Moves Without Using Accumulator
• Fast 8-Bit by 8-Bit Multiply and 16-Bit by 8-Bit Divide Instructions
• Enhanced Binary-Coded Decimal (BCD) Data Handling
• Modular Architecture with Expandable Internal Bus Definition for Extension of Addressing Range Beyond 64 Kbytes
• Low-Power Stop Mode and Wait Mode Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Central Processor Unit (CPU) CPU Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED

6.4 CPU Registers

Figure 6-1 shows the five CPU registers. CPU registers are not part of the memory map. Figure 6-1. CPU Registers

6.4.1 Accumulator

The accumulator is a general-purpose 8-bit register. The CPU uses the accumulator to hold operands and the results of arithmetic/logic operations. ACCUMULATOR (A) INDEX REGISTER (H:X) STACK POINTER (SP) PROGRAM COUNTER (PC) CONDITION CODE REGISTER (CCR) CARRY/BORROW FLAG ZERO FLAG NEGATIVE FLAG INTERRUPT MASK HALF-CARRY FLAG TWO’S COMPLEMENT OVERFLOW FLAG V11HINZC H X Bit 7 654321 Bit 0 Read: Write: Reset: Unaffected by Reset Figure 6-2. Accumulator (A) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Central Processor Unit (CPU) General Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU)

6.4.2 Index Register

The 16-bit index register allows indexed addressing of a 64-Kbyte memory space. H is the upper byte of the index register, and X is the lower byte. H:X is the concatenated 16-bit index register. In the indexed addressing modes, the CPU uses the contents of the index register to determine the conditional address of the operand. The index register can serve also as a temporary data storage location. Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Bit Read: Write: Reset: 0 0 0 0 0 0 0 0 X X X X X X X X X = Indeterminate Figure 6-3. Index Register (H:X) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Central Processor Unit (CPU) CPU Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED

6.4.3 Stack Pointer

The stack pointer is a 16-bit register that contains the address of the next location on the stack. During a reset, the stack pointer is preset to $00FF. The reset stack pointer (RSP) instruction also sets the least significant byte (LSB) to $FF but does not affect the most significant byte (MSB). The stack pointer decrements as data is pushed onto the stack and increments as data is pulled from the stack. In the stack pointer 8-bit offset and 16-bit offset addressing modes, the stack pointer can function as an index register to access data on the stack. The CPU uses the contents of the stack pointer to determine the conditional address of the operand. NOTE: The location of the stack is arbitrary and may be relocated anywhere in RAM. Moving the SP out of page zero ($0000 to $00FF) frees direct address (page zero) space. For correct operation, the stack pointer must point only to RAM locations. Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Bit Read: Write: Reset: 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Figure 6-4. Stack Pointer (SP) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Central Processor Unit (CPU) General Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU)

6.4.4 Program Counter

The program counter is a 16-bit register that contains the address of the next instruction or operand to be fetched. Normally, the program counter automatically increments to the next sequential memory location every time an instruction or operand is fetched. Jump, branch, and interrupt operations load the program counter with an address other than that of the next sequential location. During reset, the program counter is loaded with the reset vector address located at $FFFE and $FFFF. The vector address is the address of the first instruction to be executed after exiting the reset state. Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Bit Read: Write: Reset: Loaded with Vector from $FFFE and $FFFF Figure 6-5. Program Counter (PC) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Central Processor Unit (CPU) CPU Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED

6.4.5 Condition Code Register

The 8-bit condition code register contains the interrupt mask and five flags that indicate the results of the instruction just executed. Bits 6 and 5 are set permanently to logic 1. The following paragraphs describe the functions of the condition code register. V — Overflow Flag The CPU sets the overflow flag when a two's complement overflow occurs. The signed branch instructions BGT, BGE, BLE, and BLT use the overflow flag. 1 = Overflow 0 = No overflow H — Half-Carry Flag The CPU sets the half-carry flag when a carry occurs between accumulator bits 3 and 4 during an ADD or ADC operation. The half- carry flag is required for binary-coded decimal (BCD) arithmetic operations. The DAA instruction uses the states of the H and C flags to determine the appropriate correction factor. 1 = Carry between bits 3 and 4 0 = No carry between bits 3 and 4 I — Interrupt Mask When the interrupt mask is set, all maskable CPU interrupts are disabled. CPU interrupts are enabled when the interrupt mask is cleared. When a CPU interrupt occurs, the interrupt mask is set automatically after the CPU registers are saved on the stack, but before the interrupt vector is fetched. 1 = Interrupts disabled 0 = Interrupts enabled Bit 7 6 5 4 3 2 1 Bit 0 Read: V11H I NZC Write: Reset: X 1 1 X 1 X X X X = Indeterminate Figure 6-6. Condition Code Register (CCR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Central Processor Unit (CPU) General Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU) NOTE: To maintain M6805 Family compatibility, the upper byte of the index register (H) is not stacked automatically. If the interrupt service routine modifies H, then the user must stack and unstack H using the PSHH and PULH instructions. After the I bit is cleared, the highest-priority interrupt request is serviced first. A return-from-interrupt (RTI) instruction pulls the CPU registers from the stack and restores the interrupt mask from the stack. After any reset, the interrupt mask is set and can only be cleared by the clear interrupt (CLI) mask software instruction. N — Negative flag The CPU sets the negative flag when an arithmetic operation, logic operation, or data manipulation produces a negative result, setting bit 7 of the result. 1 = Negative result 0 = Non-negative result Z — Zero flag The CPU sets the zero flag when an arithmetic operation, logic operation, or data manipulation produces a result of $00. 1 = Zero result 0 = Non-zero result C — Carry/Borrow Flag The CPU sets the carry/borrow flag when an addition operation produces a carry out of bit 7 of the accumulator or when a subtraction operation requires a borrow. Some instructions — such as bit test and branch, shift, and rotate — also clear or set the carry/borrow flag. 1 = Carry out of bit 7 0 = No carry out of bit 7 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Central Processor Unit (CPU) Arithmetic/Logic Unit (ALU) MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED

6.5 Arithmetic/Logic Unit (ALU)

The ALU performs the arithmetic and logic operations defined by the instruction set. Refer to theCPU08 Reference Manual (Motorola document number CPU08RM/AD) for a description of the instructions and addressing modes and more details about the CPU’s architecture.

6.6 Instruction Set Summary

Table 6-1 provides a summary of the M68HC08 instruction set. Table 6-1. Instruction Set Summary Source Form Operation Description Effect on CCR Address Mode Opcode Operand CyclesVH I NZC ADC # opr ADC opr ADC opr ADC opr,X ADC opr,X ADC ,X ADC opr,SP ADC opr,SP Add with Carry A ← (A) + (M) + (C) ↕↕ – ↕↕↕ IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE9 9ED9 ii dd hh ll ee ff ff ff ee ff ADD # opr ADD opr ADD opr ADD opr,X ADD opr,X ADD ,X ADD opr,SP ADD opr,SP Add without Carry A ← (A) + (M) ↕↕ – ↕↕↕ IMM DIR EXT IX2 IX1 IX SP1 SP2 AB BB CB DB EB FB 9EEB 9EDB ii dd hh ll ee ff ff ff ee ff AIS #opr Add Immediate Value (Signed) to SP SP ← (SP) + (16« M) – – – – – – IMM A7 ii 2 AIX #opr Add Immediate Value (Signed) to H:X H:X← (H:X) + (16« M) – – – – – – IMM AF ii 2 AND # opr AND opr AND opr AND opr,X AND opr,X AND ,X AND opr,SP AND opr,SP Logical AND A ← (A) & (M) 0 – – ↕↕ – IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE4 9ED4 ii dd hh ll ee ff ff ff ee ff ASL opr ASLA ASLX ASL opr,X ASL ,X ASL opr,SP Arithmetic Shift Left DIR INH INH IX1 IX SP1 9E68 dd ff ff C b0b7 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Central Processor Unit (CPU) General Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU) ASR opr ASRA ASRX ASR opr,X ASR opr,X ASR opr,SP Arithmetic Shift Right ↕ –– ↕↕↕ DIR INH INH IX1 IX SP1 9E67 dd ff ff BCC rel Branch if Carry Bit Clear PC ← (PC) + 2 + rel ? (C) = 0 – – – – – – REL 24 rr 3 BCLR n,opr Clear Bit n in M Mn ← 0 –––––– DIR (b0) DIR (b1) DIR (b2) DIR (b3) DIR (b4) DIR (b5) DIR (b6) DIR (b7) dd dd dd dd dd dd dd dd BCS rel Branch if Carry Bit Set (Same as BLO) PC← (PC) + 2 +rel ? (C) = 1 – – – – – – REL 25 rr 3 BEQ rel Branch if Equal PC ← (PC) + 2 +rel ? (Z) = 1 – – – – – – REL 27 rr 3 BGE opr Branch if Greater Than or Equal To (Signed Operands) PC ← (PC) + 2 +rel ? (N⊕ V) = 0 – – – – – – REL 90 rr 3 BGT opr Branch if Greater Than (Signed Operands) PC ← (PC) + 2 +rel ? (Z) | (N⊕ V) = 0 – – – – – – REL 92 rr 3 BHCC rel Branch if Half Carry Bit Clear PC ← (PC) + 2 +rel ? (H) = 0 – – – – – – REL 28 rr 3 BHCS rel Branch if Half Carry Bit Set PC ← (PC) + 2 +rel ? (H) = 1 – – – – – – REL 29 rr 3 BHI rel Branch if Higher PC ← (PC) + 2 +rel ? (C) | (Z) = 0 – – – – – – REL 22 rr 3 BHS rel Branch if Higher or Same (Same as BCC) PC ← (PC) + 2 +rel ? (C) = 0 – – – – – – REL 24 rr 3 BIH rel Branch ifIRQ Pin High PC ← (PC) + 2 +rel ?IRQ = 1 – – – – – – REL 2F rr 3 BILrel Branch ifIRQ Pin Low PC ← (PC) + 2 +rel ?IRQ = 0 – – – – – – REL 2E rr 3 BIT #opr BIT opr BIT opr BIT opr,X BIT opr,X BIT ,X BIT opr,SP BIT opr,SP IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE5 9ED5 ii dd hh ll ee ff ff ff ee ff BLE opr Branch if Less Than or Equal To (Signed Operands) PC ← (PC) + 2 +rel ? (Z) | (N⊕ V) = 1 – – – – – – REL 93 rr 3 BLO rel Branch if Lower (Same as BCS) PC ← (PC) + 2 +rel ? (C) = 1 – – – – – – REL 25 rr 3 BLS rel Branch if Lower or Same PC ← (PC) + 2 +rel ? (C) | (Z) = 1 – – – – – – REL 23 rr 3 BLT opr Branch if Less Than (Signed Operands) PC← (PC) + 2 +rel ? (N⊕ V) =1 – – – – – – REL 91 rr 3 BMC rel Branch if Interrupt Mask Clear PC ← (PC) + 2 +rel ? (I) = 0 – – – – – – REL 2C rr 3 BMI rel Branch if Minus PC ← (PC) + 2 +rel ? (N) = 1 – – – – – – REL 2B rr 3 BMS rel Branch if Interrupt Mask Set PC ← (PC) + 2 +rel ? (I) = 1 – – – – – – REL 2D rr 3 BNE rel Branch if Not Equal PC ← (PC) + 2 +rel ? (Z) = 0 – – – – – – REL 26 rr 3 BPL rel Branch if Plus PC ← (PC) + 2 +rel ? (N) = 0 – – – – – – REL 2A rr 3 BRA rel Branch Always PC ← (PC) + 2 +rel – – – – – – REL 20 rr 3 Table 6-1. Instruction Set Summary (Continued) Source Form Operation Description Effect on CCR Address Mode Opcode Operand CyclesVH I NZC b0b7 C Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Central Processor Unit (CPU) Instruction Set Summary MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED BRCLR n,opr,rel Branch if Bitn in M Clear PC ← (PC) + 3 +rel ? (Mn) = 0 – – – – – ↕ DIR (b0) DIR (b1) DIR (b2) DIR (b3) DIR (b4) DIR (b5) DIR (b6) DIR (b7) dd rr dd rr dd rr dd rr dd rr dd rr dd rr dd rr BRN rel Branch Never PC ← (PC) + 2 – – – – – – REL 21 rr 3 BRSET n,opr,rel Branch if Bitn in M Set PC ← (PC) + 3 +rel ? (Mn) = 1 – – – – – ↕ DIR (b0) DIR (b1) DIR (b2) DIR (b3) DIR (b4) DIR (b5) DIR (b6) DIR (b7) dd rr dd rr dd rr dd rr dd rr dd rr dd rr dd rr BSET n,opr Set Bitn in M Mn ← 1 –––––– DIR (b0) DIR (b1) DIR (b2) DIR (b3) DIR (b4) DIR (b5) DIR (b6) DIR (b7) dd dd dd dd dd dd dd dd BSR rel Branch to Subroutine PC ← (PC) + 2; push (PCL) SP ← (SP) – 1; push (PCH) SP ← (SP) – 1 PC ← (PC) +rel CBEQ opr,rel CBEQA # opr,rel CBEQX # opr,rel CBEQ opr,X+,rel CBEQ X+ ,rel CBEQ opr,SP,rel Compare and Branch if Equal DIR IMM IMM IX1+ IX+ SP1 9E61 dd rr ii rr ii rr ff rr rr ff rr CLC Clear Carry Bit C ← 0 – – – – – 0 INH 98 1 CLI Clear Interrupt Mask I ← 0 – – 0 – – – INH 9A 2 CLR opr CLRA CLRX CLRH CLR opr,X CLR ,X CLR opr,SP Clear M ← $00 A ← $00 X ← $00 H ← $00 M ← $00 M ← $00 M ← $00 0––01– DIR INH INH INH IX1 IX SP1 9E6F dd ff ff CMP # opr CMP opr CMP opr CMP opr,X CMP opr,X CMP ,X CMP opr,SP CMP opr,SP Compare A with M (A) – (M) ↕ –– ↕↕↕ IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE1 9ED1 ii dd hh ll ee ff ff ff ee ff COM opr COMA COMX COM opr,X COM ,X COM opr,SP Complement (One’s Complement) M ← (M) = $FF – (M) A ← (A) = $FF – (M) X ← (X) = $FF – (M) M ← (M) = $FF – (M) M ← (M) = $FF – (M) M ← (M) = $FF – (M) 0–– ↕↕ 1 DIR INH INH IX1 IX SP1 9E63 dd ff ff Table 6-1. Instruction Set Summary (Continued) Source Form Operation Description Effect on CCR Address Mode Opcode Operand CyclesVH I NZC Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Central Processor Unit (CPU) General Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU) CPHX # opr CPHX opr Compare H:X with M (H:X) – (M:M + 1) ↕ –– ↕↕↕ IMM DIR ii ii+1 dd CPX #opr CPX opr CPX opr CPX ,X CPX opr,X CPX opr,X CPX opr,SP CPX opr,SP Compare X with M (X) – (M) ↕ –– ↕↕↕ IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE3 9ED3 ii dd hh ll ee ff ff ff ee ff DAA Decimal Adjust A (A) 10 U–– ↕↕↕ INH 72 2 DBNZ opr,rel DBNZA rel DBNZX rel DBNZ opr,X,rel DBNZ X ,rel DBNZ opr,SP,rel Decrement and Branch if Not Zero A ← (A) – 1 or M← (M) – 1 or X← ( X )–1 PC ← (PC) + 3 +rel ? (result)≠ 0 PC ← (PC) + 2 +rel ? (result)≠ 0 PC ← (PC) + 2 +rel ? (result)≠ 0 PC ← (PC) + 3 + rel ? (result)≠ 0 PC ← (PC) + 2 +rel ? (result)≠ 0 PC ← (PC) + 4 +rel ? (result)≠ 0 DIR INH INH IX1 IX SP1 9E6B dd rr rr rr ff rr rr ff rr DEC opr DECA DECX DEC opr,X DEC ,X DEC opr,SP Decrement M ← (M) – 1 A ← (A) – 1 X ← (X) – 1 M ← (M) – 1 M ← (M) – 1 M ← (M) – 1 DIR INH INH IX1 IX SP1 9E6A dd ff ff DIV Divide A ← (H:A)/(X) EOR # opr EOR opr EOR opr EOR opr,X EOR opr,X EOR ,X EOR opr,SP EOR opr,SP Exclusive OR M with A A ← (A⊕ M) 0 – – ↕↕ – IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE8 9ED8 ii dd hh ll ee ff ff ff ee ff INC opr INCA INCX INC opr,X INC ,X INC opr,SP Increment M ← (M) + 1 A ← (A) + 1 X ← (X) + 1 M ← (M) + 1 M ← (M) + 1 M ← (M) + 1 DIR INH INH IX1 IX SP1 9E6C dd ff ff JMP opr JMP opr JMP opr,X JMP opr,X JMP ,X DIR EXT IX2 IX1 IX BC CC DC EC FC dd hh ll ee ff ff JSR opr JSR opr JSR opr,X JSR opr,X JSR ,X Jump to Subroutine PC ← (PC) +n (n = 1, 2, or 3) Push (PCL); SP← (SP) – 1 Push (PCH); SP← (SP) – 1 PC ← Unconditional Address DIR EXT IX2 IX1 IX BD CD DD ED FD dd hh ll ee ff ff LDA #opr LDA opr LDA opr LDA opr,X LDA opr,X LDA ,X LDA opr,SP LDA opr,SP Load A from M A ← (M) 0 – – ↕↕ – IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE6 9ED6 ii dd hh ll ee ff ff ff ee ff Table 6-1. Instruction Set Summary (Continued) Source Form Operation Description Effect on CCR Address Mode Opcode Operand CyclesVH I NZC Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Central Processor Unit (CPU) Instruction Set Summary MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED LDHX # opr LDHX opr Load H:X from M H:X ← (M:M + 1) 0–– ↕↕ – IMM DIR ii jj dd LDX #opr LDX opr LDX opr LDX opr,X LDX opr,X LDX ,X LDX opr,SP LDX opr,SP Load X from M X ← (M) 0 – – ↕↕ – IMM DIR EXT IX2 IX1 IX SP1 SP2 AE BE CE DE EE FE 9EEE 9EDE ii dd hh ll ee ff ff ff ee ff LSL opr LSLA LSLX LSL opr,X LSL ,X LSL opr,SP Logical Shift Left DIR INH INH IX1 IX SP1 9E68 dd ff ff LSR opr LSRA LSR X LSR opr,X LSR ,X LSR opr,SP Logical Shift Right ↕ ––0 ↕↕ DIR INH INH IX1 IX SP1 9E64 dd ff ff MOV opr,opr MOV opr,X+ MOV # opr,opr MOV X+ ,opr Move (M)Destination← (M)Source H:X ← (H:X) + 1 (IX+D, DIX+) DD DIX+ IMD IX+D dd dd dd ii dd dd MUL Unsigned multiply X:A ← (X)× (A) – 0 – – – 0 INH 42 5 NEG opr NEGA NEGX NEG opr,X NEG ,X NEG opr,SP Negate (Two’s Complement) DIR INH INH IX1 IX SP1 9E60 dd ff ff NOP No Operation None – – – – – – INH 9D 1 NSA Nibble Swap A A ← (A[3:0]:A[7:4]) – – – – – – INH 62 3 ORA # opr ORA opr ORA opr ORA opr,X ORA opr,X ORA ,X ORA opr,SP ORA opr,SP Inclusive OR A and M A ← (A) | (M) 0 – – ↕↕ – IMM DIR EXT IX2 IX1 IX SP1 SP2 AA BA CA DA EA FA 9EEA 9EDA ii dd hh ll ee ff ff ff ee ff PSHA Push A onto Stack Push (A); SP ← (SP) – 1 – – – – – – INH 87 2 PSHH Push H onto Stack Push (H) ; SP ← (SP) –1 –––––– I N H 8 B 2 PSHX Push X onto Stack Push (X) ;SP ← (SP) –1 –––––– I N H 8 9 2 PULA Pull A from Stack SP ← (SP + 1); Pull (A) –––––– I N H 8 6 2 PULH Pull H from Stack SP ← (SP + 1); Pull (H ) –––––– I N H 8 A 2 PULX Pull X from Stack SP ← (SP + 1); Pull (X) –––––– I N H 8 8 2 ROL opr ROLA ROLX ROL opr,X ROL ,X ROL opr,SP Rotate Left through Carry ↕ –– ↕↕↕ DIR INH INH IX1 IX SP1 9E69 dd ff ff Table 6-1. Instruction Set Summary (Continued) Source Form Operation Description Effect on CCR Address Mode Opcode Operand CyclesVH I NZC C b0b7 b0b7 C b0b7 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Central Processor Unit (CPU) General Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU) ROR opr RORA RORX ROR opr,X ROR ,X ROR opr,SP Rotate Right through Carry ↕ –– ↕↕↕ DIR INH INH IX1 IX SP1 9E66 dd ff ff RSP Reset Stack Pointer SP ← $FF – – – – – – INH 9C 1 RTI Return from Interrupt SP ← (SP) + 1; Pull (CCR) SP ← (SP) + 1; Pull (A) SP ← (SP) + 1; Pull (X) SP ← (SP) + 1; Pull (PCH) SP ← (SP) + 1; Pull (PCL) RTS Return from Subroutine SP ← SP + 1;Pull (PCH) SP ← SP + 1; Pull (PCL) –––––– I N H 8 1 4 SBC #opr SBC opr SBC opr SBC opr,X SBC opr,X SBC ,X SBC opr,SP SBC opr,SP Subtract with Carry A ← (A) – (M) – (C) ↕ –– ↕↕↕ IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE2 9ED2 ii dd hh ll ee ff ff ff ee ff SEC Set Carry Bit C ← 1 – – – – – 1 INH 99 1 SEI Set Interrupt Mask I ← 1 – – 1 – – – INH 9B 2 STA opr STA opr STA opr,X STA opr,X STA ,X STA opr,SP STA opr,SP Store A in M M ← (A) 0 – – ↕↕ – DIR EXT IX2 IX1 IX SP1 SP2 9EE7 9ED7 dd hh ll ee ff ff ff ee ff STHX opr Store H:X in M (M:M + 1) ← (H:X) 0 – – ↕↕ – DIR 35 dd 4 STOP Enable IRQ Pin; Stop Oscillator I ← 0; Stop Oscillator – – 0 – – – INH 8E 1 STX opr STX opr STX opr,X STX opr,X STX ,X STX opr,SP STX opr,SP Store X in M M ← (X) 0 – – ↕↕ – DIR EXT IX2 IX1 IX SP1 SP2 BF CF DF EF FF 9EEF 9EDF dd hh ll ee ff ff ff ee ff SUB #opr SUB opr SUB opr SUB opr,X SUB opr,X SUB ,X SUB opr,SP SUB opr,SP IMM DIR EXT IX2 IX1 IX SP1 SP2 9EE0 9ED0 ii dd hh ll ee ff ff ff ee ff SWI Software Interrupt PC ← (PC) + 1; Push (PCL) SP ← (SP) – 1; Push (PCH) SP ← (SP) – 1; Push (X) SP ← (SP) – 1; Push (A) SP ← (SP) – 1; Push (CCR) SP ← (SP) – 1; I← 1 PCH ← Interrupt Vector High Byte PCL ← Interrupt Vector Low Byte TAP Transfer A to CCR CCR ← (A) ↕↕↕↕↕↕ INH 84 2 Table 6-1. Instruction Set Summary (Continued) Source Form Operation Description Effect on CCR Address Mode Opcode Operand CyclesVH I NZC b0b7 C Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Central Processor Unit (CPU) Opcode Map MC68HC08KL8 — Rev. 2.0 General Release Specification Central Processor Unit (CPU) NON-DISCLOSURE AGREEMENT REQUIRED

6.7 Opcode Map

See Table 6-2. TAX Transfer A to X X ← (A) – – – – – – INH 97 1 TPA Transfer CCR to A A ← (CCR) – – – – – – INH 85 1 TST opr TSTA TSTX TST opr,X TST ,X TST opr,SP Test for Negative or Zero (A) – $00 or (X) – $00 or (M) – $00 0 – – ↕↕ – DIR INH INH IX1 IX SP1 9E6D dd ff ff TSX Transfer SP to H:X H:X ← (SP) + 1 – – – – – – INH 95 2 TXA Transfer X to A A ← (X) – – – – – – INH 9F 1 TXS Transfer H:X to SP (SP) ← (H:X) – 1 – – – – – – INH 94 2 A Accumulator n Any bit C Carry/borrow bit opr Operand (one or two bytes) CCR Condition code register PC Program counter dd Direct address of operand PCH Program counter high byte dd rr Direct address of operand and relative offset of branch instruction PCL Program counter low byte DD Direct to direct addressing mode REL Relative addressing mode DIR Direct addressing mode rel Relative program counter offset byte DIX+ Direct to indexed with post increment addressing mode rr Relative program counter offset byte ee ff High and low bytes of offset in indexed, 16-bit offset addressing SP1 Stack pointer, 8-bit offset addressing mode EXT Extended addressing mode SP2 Stack pointer 16-bit offset addressing mode ff Offset byte in indexed, 8-bit offset addressing SP Stack pointer H Half-carry bit U Undefined H Index register high byte V Overflow bit hh ll High and low bytes of operand address in extended addressing X Index register low byte I Interrupt mask Z Zero bit ii Immediate operand byte & Logical AND IMD Immediate source to direct destination addressing mode | Logical OR IMM Immediate addressing mode ⊕ Logical EXCLUSIVE OR INH Inherent addressing mode ( ) Contents of IX Indexed, no offset addressing mode –( ) Negation (two’s complement) IX+ Indexed, no offset, post increment addressing mode # Immediate value IX+D Indexed with post increment to direct addressing mode « Sign extend IX1 Indexed, 8-bit offset addressing mode ← Loaded with IX1+ Indexed, 8-bit offset, post increment addressing mode ? If IX2 Indexed, 16-bit offset addressing mode : Concatenated with M Memory location ↕ Set or cleared N Negative bit — Not affected Table 6-1. Instruction Set Summary (Continued) Source Form Operation Description Effect on CCR Address Mode Opcode Operand CyclesVH I NZC Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIREDGeneral Release Specification MC68HC08KL8 — Rev. 2.0 Central Processor Unit (CPU) Central Processor Unit (CPU) Table 6-2. Opcode Map Bit Manipulation Branch Read-Modify-Write Control Register/Memory DIR DIR REL DIR INH INH IX1 SP1 IX INH INH IMM DIR EXT IX2 SP2 IX1 SP1 IX 0123456 9 E 6 789 ABCD 9 E D E 9 E E F BRSET0

3 DIR

2 DIR

2 REL

1 INH

2 IX1

3 SP1

2 IMM

3 EXT

3 IX2

4 SP2

3 IMM

3 IX1+

4 SP1

2 IX+

A BRSET5 B BRCLR5

2 INH

3 IX1

C BRSET6 D BRCLR6 E BRSET7

2 DIX+

3 IMD

2 IX+D

1 INH *

F BRCLR7 INH Inherent REL Relative SP1 Stack Pointer, 8-Bit Offset IMM Immediate IX Indexed, No Offset SP2 Stack Pointer, 16-Bit Offset DIR Direct IX1 Indexed, 8-Bit Offset IX+ Indexed, No Offset with EXT Extended IX2 Indexed, 16-Bit Offset Post Increment DD Direct-Direct IMD Immediate-Direct IX1+ Indexed, 1-Byte Offset with IX+D Indexed-Direct DIX+ Direct-Indexed Post Increment *Pre-byte for stack pointer indexed instructions

0 High Byte of Opcode in Hexadecimal

Low Byte of Opcode in Hexadecimal 0 BRSET0 Number of Bytes / Addressing Mode MSB LSB MSB LSB Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Oscillator NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 7. Oscillator

7.1 Contents

7.2 Introduction

The oscillator circuit is designed for use with crystals or ceramic resonators. The oscillator circuit generates the crystal clock signal, CGMXCLK, at the frequency of the crystal. This signal is divided by two before being passed on to the system integration module (SIM) for bus clock generation. Figure 7-1 shows the structure of the oscillator. The oscillator requires various external components. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Oscillator General Release Specification MC68HC08KL8 — Rev. 2.0 Oscillator

7.3 Oscillator External Connections

In its typical configuration, the oscillator requires five external components. The crystal oscillator is normally connected in a Pierce oscillator configuration, as shown inFigure 7-1. This figure shows only the logical representation of the internal components and may not represent actual circuitry. The oscillator configuration uses five components:

• Crystal, X1
• Fixed capacitor, C1
• Tuning capacitor, C2 (can also be a fixed capacitor)
• Feedback resistor, RB
• Series resistor, RS (optional) Figure 7-1. Oscillator External Connections C1 C2 SIMOSCEN CGMXCLK RS* OSC1 OSC2 * RS can be 0 (shorted) when used with higher-frequency crystals. Refer to manufacturer’s data. MCU FROM SIM CGMOUT TO SIM AND USB ÷ 2 RB TO SIM Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Oscillator NON-DISCLOSURE AGREEMENT REQUIRED The series resistor (RS) is included in the diagram to follow strict Pierce oscillator guidelines and may not be required for all ranges of operation, especially with high-frequency crystals. Refer to the crystal manufacturer’s data for more information.

7.4 I/O Signals

The following paragraphs describe the oscillator input/output (I/O) signals.

7.4.1 Crystal Amplifier Input Pin (OSC1)

The OSC1 pin is an input to the crystal oscillator amplifier.

7.4.2 Crystal Amplifier Output Pin (OSC2)

The OSC2 pin is the output of the crystal oscillator inverting amplifier.

7.4.3 Oscillator Enable Signal (SIMOSCEN)

The SIMOSCEN signal comes from the system integration module (SIM) and enables the oscillator.

7.4.4 External Clock Source (CGMXCLK)

CGMXCLK is the crystal oscillator output signal. It runs at the full speed of the crystal (fXCLK ) and comes directly from the crystal oscillator circuit. Figure 7-1 shows only the logical relation of CGMXCLK to OSC1 and OSC2 and may not represent the actual circuitry. The duty cycle of CGMXCLK is unknown and may depend on the crystal and other external factors. Also, the frequency and amplitude of CGMXCLK can be unstable at startup. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Oscillator General Release Specification MC68HC08KL8 — Rev. 2.0 Oscillator

7.4.5 Oscillator Out (CGMOUT)

The clock driven to the SIM is the crystal frequency divided by two. This signal is driven to the SIM for generation of the bus clocks used by the CPU and other modules on the MCU. CGMOUT will be divided again in the SIM and results in the internal bus frequency being one fourth of the CGMXCLK frequency.

7.5 Low-Power Modes

The WAIT and STOP instructions put the MCU in low-power standby modes.

7.5.1 Wait Mode

The WAIT instruction has no effect on the oscillator logic. CGMXCLK continues to drive to the SIM module.

7.5.2 Stop Mode

The STOP instruction disables the CGMXCLK output.

7.6 Oscillator During Break Mode

The oscillator continues to drive CGMXCLK when the chip enters the break state. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 8. System Integration Module (SIM)

8.1 Contents

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.2 Introduction

This section describes the system integration module (SIM), which supports up to 16 external and/or internal interrupts. Together with the CPU, the SIM controls all MCU activities. The SIM is a system state controller that coordinates CPU and exception timing. A block diagram of the SIM is shown inFigure 8-1.Figure 8-2is a summary of the SIM I/O registers. The SIM is responsible for:

• Bus clock generation and control for CPU and peripherals – Stop/wait/reset/break entry and recovery – Internal clock control
• Master reset control, including power-on reset (POR) and computer operating properly (COP) timeout
• Interrupt control: – Acknowledge timing – Arbitration control timing – Vector address generation
• CPU enable/disable timing
• Modular architecture expandable to 128 interrupt sources Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Introduction MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED Figure 8-1. SIM Block Diagram STOP/WAIT CLOCK CONTROL CLOCK GENERATORS POR CONTROL RESET PIN CONTROL SIM RESET STATUS REGISTER INTERRUPT CONTROL AND PRIORITY DECODE MODULE STOP MODULE WAIT CPU STOP (FROM CPU) CPU WAIT (FROM CPU) SIMOSCEN (TO OSCILLATOR) CGMOUT (FROM OSCILLATOR) INTERNAL CLOCKS MASTER RESET CONTROL RESET PIN LOGIC ILLEGAL OPCODE (FROM CPU) ILLEGAL ADDRESS (FROM ADDRESS MAP DECODERS) COP TIMEOUT (FROM COP MODULE) INTERRUPT SOURCES CPU INTERFACE RESET CONTROL SIM COUNTER COP CLOCK CGMXCLK (FROM OSCILLATOR) USB RESET (FROM USB MODULE) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM) NOTE: Writing to a reserved address can have unpredictable effects on MCU operation. Addr. Register Name Bit 7 6 5 4 3 2 1 0 $FE00 Break Status Register (BSR) Read: R R RRRR SBSW R Write: Note 1 Reset: 0 $FE01 Reset Status Register (RSR) Read: POR PIN COP ILOP ILAD USB 0 0 Write: POR: 1 0 0 0 0 0 0 0 $FE03 Break Flag Control Register (BFCR) Read: BCFE R R R R R R R Write: Reset: 0 $FE04 Interrupt Status Register 1 (INT1) Read: IF6 IF5 IF4 IF3 IF2 IF1 0 0 Write: R R R R R R R R Reset: 0 0 0 0 0 0 0 0 $FE05 Interrupt Status Register 2 (INT2) Read: IF14 IF13 IF12 IF11 IF10 IF9 IF8 IF7 Write: R R R R R R R R Reset: 0 0 0 0 0 0 0 0 Note 1. Writing a logic 0 clears SBSW. = Unimplemented R = Reserved Figure 8-2. SIM Register Summary Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) SIM Bus Clock Control and Generation MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED Table 8-1 shows the internal signal names used in this section.

8.3 SIM Bus Clock Control and Generation

The bus clock generator provides system clock signals for the CPU and peripherals on the MCU. The system clocks are generated from an incoming clock, CGMOUT, as shown inFigure 8-3. Figure 8-3. SIM Clock Signals Table 8-1. Signal Name Conventions Signal Name Description CGMXCLK Buffered OSC1 from the oscillator CGMOUT The CGMXCLK frequency divided by two. This signal is again divided by two in the SIM to generate the internal bus clocks. (Bus clock = CGMXCLK divided by four) IAB Internal address bus IDB Internal data bus PORRST Signal from the power-on reset module to the SIM IRST Internal reset signal R/W Read/write signal ÷ 2 BUS CLOCK GENERATORS SIM SIM COUNTER FROM OSCILLATOR FROM OSCILLATOR CGMOUT CGMXCLK Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.3.1 Bus Timing

In user mode, the internal bus frequency is the oscillator frequency (CGMXCLK) divided by four.

8.3.2 Clock Startup from POR

When the power-on reset (POR) module generates a reset, the clocks to the CPU and peripherals are inactive and held in an inactive phase until after the 4096 CGMXCLK cycle POR timeout has completed. The RST pin is driven low by the SIM during this entire period. The IBUS clocks start upon completion of the timeout.

8.3.3 Clocks in Stop Mode and Wait Mode

Upon exit from stop mode by an interrupt, break, or reset, the SIM allows CGMXCLK to clock the SIM counter. The CPU and peripheral clocks do not become active until after the stop delay timeout. This timeout is selectable as 4096 or 32 CGMXCLK cycles. (See8.7.2 Stop Mode.) In wait mode, the CPU clocks are inactive. The SIM also produces two sets of clocks for other modules. Refer to the wait mode subsection of each module to see if the module is active or inactive in wait mode. Some modules can be programmed to be active in wait mode.

8.4 Reset and System Initialization

The MCU has these reset sources:

• Power-on reset module (POR)
• External reset pin (RST)
• Computer operating properly module (COP)
• Illegal opcode
• Illegal address
• Universal serial bus module (USB) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Reset and System Initialization MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED All of these resets produce the vector $FFFE–FFFF ($FEFE–FEFF in monitor mode) and assert the internal reset signal (IRST). IRST causes all registers to be returned to their default values and all modules to be returned to their reset states. An internal reset clears the SIM counter (see8.5 SIM Counter), but an external reset does not. Each of the resets sets a corresponding bit in the reset status register (RSR). (See8.8 SIM Registers.)

8.4.1 External Pin Reset

The RST pin circuits include an internal pullup device. Pulling the asynchronousRST pin low halts all processing. The PIN bit of the reset status register (RSR) is set as long asRST is held low for a minimum of

67 CGMXCLK cycles, assuming that the POR was not the source of the

reset. SeeTable 8-2 for details.Figure 8-4 shows the relative timing. Figure 8-4. External Reset Timing Table 8-2. PIN Bit Set Timing Reset Type Number of Cycles Required to Set PIN POR 4163 (4096 + 64 + 3) All Others 67 (64 + 3) RST IAB PC VECT H VECT L CGMOUT Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.4.2 Active Resets from Internal Sources

All internal reset sources actively pull theRST pin low for 32 CGMXCLK cycles to allow resetting of external peripherals. The internal reset signal IRST continues to be asserted for an additional 32 cycles. (SeeFigure 8-5.) An internal reset can be caused by an illegal address, illegal opcode, COP timeout, the USB module, or POR. (SeeFigure 8-6.)Note that for POR resets, the SIM cycles through 4096 CGMXCLK cycles during which the SIM forces theRST pin low. The internal reset signal then follows the sequence from the falling edge ofRST shown inFigure 8-5. Figure 8-5. Internal Reset Timing The COP reset is asynchronous to the bus clock. Figure 8-6. Sources of Internal Reset The active reset feature allows the part to issue a reset to peripherals and other chips within a system built around the MCU. IRST RST RST PULLED LOW BY MCU IAB

32 CYCLES 32 CYCLES

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Reset and System Initialization MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED

8.4.2.1 Power-On Reset

When power is first applied to the MCU, the power-on reset module (POR) generates a pulse to indicate that power-on has occurred. The external reset pin (RST) is held low while the SIM counter counts out 4096 CGMXCLK cycles. Sixty-four CGMXCLK cycles later, the CPU and memories are released from reset to allow the reset vector sequence to occur. At power-on, these events occur:

• A POR pulse is generated.
• The internal reset signal is asserted.
• The SIM enables the oscillator to drive CGMXCLK.
• Internal clocks to the CPU and modules are held inactive for 4096 CGMXCLK cycles to allow stabilization of the oscillator.
• The RST pin is driven low during the oscillator stabilization time.
• The POR bit of the reset status register (RSR) is set and all other bits in the register are cleared. Figure 8-7. POR Recovery PORRST OSC1 CGMXCLK CGMOUT RST IAB 4096 CYCLES CYCLES CYCLES $FFFE $FFFF Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.4.2.2 Computer Operating Properly (COP) Reset

An input to the SIM is reserved for the COP reset signal. The overflow of the COP counter causes an internal reset and sets the COP bit in the reset status register (RSR). The SIM actively pulls down theRST pin for all internal reset sources. To prevent a COP module timeout, write any value to location $FFFF. Writing to location $FFFF clears the COP counter and stages 12 through 5 of the SIM counter. The SIM counter output, which occurs at least every 212 – 24 CGMXCLK cycles, drives the COP counter. The COP should be serviced as soon as possible out of reset to guarantee the maximum amount of time before the first timeout. The COP module is disabled if theRST pin or theIRQ1 pin is held at VTST while the MCU is in monitor mode. The COP module can be disabled only through combinational logic conditioned with the high voltage signal on theRST or theIRQ1 pin. This prevents the COP from becoming disabled as a result of external noise. During a break state, VTST on theRST pin disables the COP module.

8.4.2.3 Illegal Opcode Reset

The SIM decodes signals from the CPU to detect illegal instructions. An illegal instruction sets the ILOP bit in the reset status register (RSR) and causes a reset. If the stop enable bit, STOP, in the mask option register is logic 0, the SIM treats the STOP instruction as an illegal opcode and causes an illegal opcode reset. The SIM actively pulls down theRST pin for all internal reset sources.

8.4.2.4 Illegal Address Reset

An opcode fetch from an unmapped address generates an illegal address reset. The SIM verifies that the CPU is fetching an opcode prior to asserting the ILAD bit in the reset status register (RSR) and resetting the MCU. A data fetch from an unmapped address does not generate a reset. The SIM actively pulls down theRST pin for all internal reset sources. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) SIM Counter MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED

8.4.2.5 Universal Serial Bus Reset

The USB module will detect a reset signaled on the bus by the presence of an extended SE0 at the USB data pins of a device. The reset signaling is specified to be present for a minimum of 10 ms. An active device (powered and not in the suspend state) seeing a single-ended 0 on its USB data inputs for more than 2.5µs may treat that signal as a reset, but must have interpreted the signaling as a reset within 5.5µs. For a low-speed device, an SE0 condition between 4 and 8 low-speed bit times represents a valid USB reset. After the reset is removed, the device will be in the attached, but not yet addressed or configured, state (refer to Section 9.1 USB Devices of theUniversal Serial Bus SpecificationRev. 1.0). The device must be able to accept the device address via a SET_ADDRESS command (refer to Section 9.4 of the Universal Serial Bus SpecificationRev. 1.0) no later than 10 ms after the reset is removed. Reset can wake a device from the suspended mode. A device may take up to 10 ms to wake up from the suspended state.

8.5 SIM Counter

The SIM counter is used by the power-on reset module (POR) and in stop mode recovery to allow the oscillator time to stabilize before enabling the internal bus (IBUS) clocks. The SIM counter also serves as a prescalar for the computer operating properly module (COP). The SIM counter uses 12 stages for counting, followed by a 13th stage that triggers a reset of SIM counters and supplies the clock for the COP module. The SIM counter is clocked by the falling edge of CGMXCLK.

8.5.1 SIM Counter During Power-On Reset

The power-on reset module (POR) detects power applied to the MCU. At power-on, the POR circuit asserts the signal PORRST. Once the SIM is initialized, it enables the oscillator to drive the bus clock state machine. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.5.2 SIM Counter During Stop Mode Recovery

The SIM counter also is used for stop mode recovery. The STOP instruction clears the SIM counter. After an interrupt, break, or reset, the SIM senses the state of the short stop recovery bit, SSREC, in the mask option register. If the SSREC bit is a logic 1, then the stop recovery is reduced from the normal delay of 4096 CGMXCLK cycles down to 32 CGMXCLK cycles. This is ideal for applications using canned oscillators that do not require long startup times from stop mode. External crystal applications should use the full stop recovery time by having SSREC cleared in the mask option register.

8.5.3 SIM Counter and Reset States

External reset has no effect on the SIM counter. (See8.7.2 Stop Mode for details.) The SIM counter is free-running after all reset states. (See

8.4.2 Active Resets from Internal Sources for counter control and

internal reset recovery sequences.)

8.6 Exception Control

Normal, sequential program execution can be changed in three different ways:

• Interrupts – Maskable hardware CPU interrupts – Non-maskable software interrupt instruction (SWI)
• Reset
• Break interrupts

8.6.1 Interrupts

An interrupt temporarily changes the sequence of program execution to respond to a particular event. The flowchart inFigure 8-8 shows the handling of system interrupts. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Exception Control MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED Figure 8-8. Interrupt Processing NO NO NO YES NO NO YES NO YES YES FROM RESET BREAK I BIT SET? IRQ1 INTERRUPT USB INTERRUPT FETCH NEXT INSTRUCTION UNSTACK CPU REGISTERS STACK CPU REGISTERS SET I BIT LOAD PC WITH INTERRUPT VECTOR EXECUTE INSTRUCTION YES YES I BIT SET? INTERRUPT YESOTHER INTERRUPTS NO SWI INSTRUCTION RTI INSTRUCTION Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Exception Control MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED

8.6.1.1 Hardware Interrupts

A hardware interrupt does not stop the current instruction. Processing of a hardware interrupt begins after completion of the current instruction. When the current instruction is complete, the SIM checks all pending hardware interrupts. If interrupts are not masked (I bit clear in the condition code register) and if the corresponding interrupt enable bit is set, the SIM proceeds with interrupt processing; otherwise, the next instruction is fetched and executed. If more than one interrupt is pending at the end of an instruction execution, the highest priority interrupt is serviced first.Figure 8-11 demonstrates what happens when two interrupts are pending. If an interrupt is pending upon exit from the original interrupt service routine, the pending interrupt is serviced before the LDA instruction is executed. Figure 8-11.Interrupt Recognition Example The LDA opcode is prefetched by both the INT1 and INT2 RTI instructions. However, in the case of the INT1 RTI prefetch, this is a redundant operation. NOTE: To maintain compatibility with the M6805 Family, the H register is not pushed on the stack during interrupt entry. If the interrupt service routine modifies the H register or uses the indexed addressing mode, software should save the H register and then restore it prior to exiting the routine. CLI LDA INT1 PULH RTI INT2 BACKGROUND#$FF PSHH INT1 INTERRUPT SERVICE ROUTINE PULH RTI PSHH INT2 INTERRUPT SERVICE ROUTINE ROUTINE Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.6.1.2 SWI Instruction

The SWI instruction is a non-maskable instruction that causes an interrupt regardless of the state of the interrupt mask (I bit) in the condition code register. NOTE: A software interrupt pushes PC onto the stack. A software interrupt does not push PC–1, as a hardware interrupt does.

8.6.2 Interrupt Status Registers

The flags in the interrupt status registers identify maskable interrupt sources.Table 8-3 summarizes the interrupt sources and the interrupt status register flags that they set. The interrupt status registers can be useful for debugging. Table 8-3. Interrupt Sources Source Flags Mask (1) INT Register Flag Priority(2) Vector Address SWI Instruction — — — 0 $FFFC–$FFFD IRQ1 Pin IRQF1 IMASK1 IF1 1 $FFFA–$FFFB USB Endpoint 0 Transmit TXD0F TXD0IE IF2 2 $FFF8–$FFF9 USB Endpoint 0 Receive RXD0F RXD0IE USB Endpoint 1/ Endpoint 2 Transmit TXD1F TXD1IE USB End of Packet EOPF EOPIE USB Resume Interrupt RESUMF — TIM Channel 0 CH0F CH0IE IF3 3 $FFF6–$FFF7 TIM Channel 1 CH1F CH1IE IF4 4 $FFF4–$FFF5 TIM Overflow TOF TOIE IF5 5 $FFF2–$FFF3 Keyboard Pins KEYF IMASKK IF6 6 $FFF0–$FFF1 1. The I bit in the condition code register is a global mask for all interrupt sources except the SWI instruction. 2. 0 = highest priority Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Exception Control MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED

8.6.2.1 Interrupt Status Register 1

NOTE: Writing to a reserved address can have unpredictable effects on MCU operation. IF6–IF1 — Interrupt Flags 1–6 These flags indicate the presence of interrupt requests from the sources shown inTable 8-3. 1 = Interrupt request present 0 = No interrupt request present Bit 0 and Bit 1 — Always read 0 Address: $FE04 Bit 7 654321 Bit 0 Read: IF6 IF5 IF4 IF3 IF2 IF1 0 0 Write: RRRRRRRR Reset: 00000000 R = Reserved Figure 8-12. Interrupt Status Register 1 (INT1) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.6.2.2 Interrupt Status Register 2

NOTE: Writing to a reserved address can have unpredictable effects on MCU operation. IF14–IF7 — Interrupt Flags 14–7 Since the MC68HC08KL8 does not use these interrupt flags, these bits will always read 0. Address: $FE05 Bit 7 654321 Bit 0 Read: IF14 IF13 IF12 IF11 IF10 IF9 IF8 IF7 Write: RRRRRRRR Reset: 00000000 R = Reserved Figure 8-13. Interrupt Status Register 2 (INT2) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Exception Control MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED

8.6.3 Reset

All reset sources always have equal and highest priority and cannot be arbitrated.

8.6.4 Break Interrupts

The break module can stop normal program flow at a software- programmable break point by asserting its break interrupt output. (See Section 16. Break Module (BREAK).) The SIM puts the CPU into the break state by forcing it to the SWI vector location. Refer to the break interrupt subsection of each module to see how each module is affected by the break state.

8.6.5 Status Flag Protection in Break Mode

The SIM controls whether status flags contained in other modules can be cleared during break mode. The user can select whether flags are protected from being cleared by properly initializing the break clear flag enable bit (BCFE) in the break flag control register (BFCR). Protecting flags in break mode ensures that set flags will not be cleared while in break mode. This protection allows registers to be freely read and written during break mode without losing status flag information. Setting the BCFE bit enables the clearing mechanisms. Once cleared in break mode, a flag remains cleared even when break mode is exited. Status flags with a 2-step clearing mechanism — for example, a read of one register followed by the read or write of another — are protected, even when the first step is accomplished prior to entering break mode. Upon leaving break mode, execution of the second step will clear the flag as normal. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM)

8.7 Low-Power Modes

Executing the WAIT or STOP instruction puts the MCU in a low-power mode for standby situations. The SIM holds the CPU in a non-clocked state. The operation of each of these modes is described here. Both STOP and WAIT clear the interrupt mask (I) in the condition code register, allowing interrupts to occur.

8.7.1 Wait Mode

In wait mode, the CPU clocks are inactive while the peripheral clocks continue to run.Figure 8-14 shows the timing for wait mode entry. A module that is active during wait mode can wake up the CPU with an interrupt if the interrupt is enabled. Stacking for the interrupt begins one cycle after the WAIT instruction during which the interrupt occurred. In wait mode, the CPU clocks are inactive. Refer to the wait mode subsection of each module to see if the module is active or inactive in wait mode. Some modules can be programmed to be active in wait mode. Wait mode can also be exited by a reset or break. A break interrupt during wait mode sets the SIM break stop/wait bit, SBSW, in the break status register (BSR). If the COP disable bit, COPD, in the mask option register is logic 0, then the computer operating properly module (COP) is enabled and remains active in wait mode. Figure 8-14. Wait Mode Entry Timing WAIT ADDR + 1 SAME SAMEIAB IDB PREVIOUS DATA NEXT OPCODE SAME WAIT ADDR SAME R/W NOTE: Previous data can be operand data or the WAIT opcode, depending on the last instruction. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) Low-Power Modes MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED Figure 8-15 andFigure 8-16 show the timing for WAIT recovery. Figure 8-15. Wait Recovery from Interrupt or Break Figure 8-16. Wait Recovery from Internal Reset

8.7.2 Stop Mode

In stop mode, the SIM counter is reset and the system clocks are disabled. An interrupt request from a module can cause an exit from stop mode. Stacking for interrupts begins after the selected stop recovery time has elapsed. Reset or break also causes an exit from stop mode. The SIM disables the oscillator signals (CGMOUT and CGMXCLK) in stop mode, stopping the CPU and peripherals. Stop recovery time is selectable using the SSREC bit in the mask option register. If SSREC is set, stop recovery is reduced from the normal delay of 4096 CGMXCLK cycles down to 32. This is ideal for applications using canned oscillators that do not require long startup times from stop mode. $6E0C$6E0B $00FF $00FE $00FD $00FC IAB IDB EXITSTOPWAIT NOTE: EXITSTOPWAIT = RST pin or CPU interrupt or break interrupt IAB IDB RST $A6 $A6 $6E0B RST VCT H RST VCT L $A6 CGMXCLK CYCLES CYCLES Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) SIM Registers MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED

8.8 SIM Registers

The SIM has two break registers and one reset register.

8.8.1 Break Status Register

The break status register contains a flag to indicate that a break caused an exit from stop mode or wait mode. NOTE: Writing to a reserved address can have unpredictable effects on MCU operation. SBSW — SIM Break Stop/Wait This status bit is useful in applications requiring a return to wait mode or stop mode after exiting from a break interrupt. Clear SBSW by writing a logic 0 to it. Reset clears SBSW. 1 = Stop mode or wait mode exited by break interrupt 0 = Stop mode or wait mode not exited by break interrupt Address: $FE00 Bit 7 654321 Bit 0 Read: RRRRRR SBSW R Write: Note 1 Reset: 0 Note 1. Writing a logic 0 clears SBSW. R = Reserved Figure 8-19. Break Status Register (BSR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM) SBSW can be read within the break state SWI routine. The user can modify the return address on the stack by subtracting one from it. The following code is an example of this. Writing 0 to the SBSW bit clears it. This code works if the H register has been pushed onto the stack in the break service routine software. This code should be executed at the end of the break service routine software. HIBYTE EQU 5 LOBYTE EQU 6 ; If not SBSW, do RTI BRCLR SBSW,BSR, RETURN ; See if wait mode or stop mode was exited by break. TST LOBYTE,SP ; If RETURNLO is not zero, BNE DOLO ; then just decrement low byte. DEC HIBYTE,SP ; Else deal with high byte, too. DOLO DEC LOBYTE,SP ; Point to WAIT/STOP opcode. RETURN PULH RTI ; Restore H register. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

System Integration Module (SIM) SIM Registers MC68HC08KL8 — Rev. 2.0 General Release Specification System Integration Module (SIM) NON-DISCLOSURE AGREEMENT REQUIRED

8.8.2 Reset Status Register

This register contains six flags that show the source of the last reset. All flag bits are cleared automatically following a read of the register. The register is initialized on power-up as shown with the POR bit set and all other bits cleared. However, during a POR or any other internal reset, theRST pin is pulled low. After the pin is released, it will be sampled 32 CGMXCLK cycles later. If the pin is not above a VIH at that time, then the PIN bit in the RSR may be set in addition to whatever other bits are set. POR — Power-On Reset Bit 1 = A POR has occurred. 0 = Read of RSR PIN — External Reset Bit 1 = An external reset has occurred since the last read of the RSR. 0 = Read of RSR COP — Computer Operating Properly Reset Bit 1 = A COP reset has occurred since the last read of the RSR. 0 = POR or read of RSR ILOP — Illegal Opcode Reset Bit 1 = An illegal opcode reset has occurred since the last read of the RSR. 0 = POR or read of RSR Address: $FE01 Bit 7 654321 Bit 0 Read: POR PIN COP ILOP ILAD USB 0 0 Write: POR: 10000000 = Unimplemented Figure 8-20. Reset Status Register (RSR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED System Integration Module (SIM) General Release Specification MC68HC08KL8 — Rev. 2.0 System Integration Module (SIM) ILAD — Illegal Address Reset Bit (opcode fetches only) 1 = An illegal address reset has occurred since the last read of the RSR. 0 = POR or read of RSR USB — Universal Serial Bus Reset Bit 1 = Last reset caused by an USB module 0 = POR or read of RSR

8.8.3 Break Flag Control Register

The break control register contains a bit that enables software to clear status bits while the MCU is in a break state. NOTE: Writing to a reserved address can have unpredictable effects on MCU operation. BCFE — Break Clear Flag Enable Bit This read/write bit enables software to clear status bits by accessing status registers while the MCU is in a break state. To clear status bits during the break state, the BCFE bit must be set. 1 = Status bits clearable during break 0 = Status bits not clearable during break Address: $FE03 Bit 7 654321 Bit 0 Read: BCFE RRRRRRR Write: POR: 0 R = Reserved Figure 8-21. Break Flag Control Register (BFCR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 9. Universal Serial Bus Module (USB)

9.1 Contents

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.2 Features

Features of the USB (universal serial bus) module include:

• Integrated 3.3-Volt Regulator with 3.3-Volt Output Pin
• Integrated USB Transceiver Supporting Low-Speed Functions
• USB Data Control Logic – Packet Decoding/Generation – CRC (Cyclic Redundancy Check) Generation and Checking – NRZI (Non-Return-to Zero Inserted) Encoding/Decoding – Bit-Stuffing
• USB Reset Support
• Control Endpoint 0 and Interrupt Endpoints 1 and 2
• Two 8-Byte Transmit Buffers
• One 8-Byte Receive Buffer
• Suspend and Resume Operations – Remote Wakeup Support
• USB-Generated Interrupts – Transaction Interrupt Driven – Resume Interrupt – End-of-Packet Interrupt
• Stall, Nak, and Ack Handshake Generation Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.3 Overview

This section provides an overview of the universal serial bus (USB) module developed for the MC68HC08KL8. This USB module is designed to serve as a low-speed (LS) USB device per theUniversal Serial Bus SpecificationRev 1.0. Three types of USB data transfers are supported: control, interrupt, and bulk (transmit only). Endpoint 0 functions as a receive/transmit control endpoint. Endpoints 1 and 2 can function as interrupt or bulk, but only in the transmit direction. A block diagram of the USB module is shown inFigure 9-1. The USB module manages communications between the host and the USB function. The module is partitioned into four functional blocks. These blocks consist of a 3.3-volt regulator, a dual-function transceiver, the USB control logic, and the endpoint registers. The blocks are further detailed later in this section (see9.5 Hardware Description). Figure 9-1. USB Block Diagram D + D – USB CONTROL LOGIC TRANSCEIVER USB UPSTREAM PORT RCV VPIN VMIN VPOUT VMOUT REGULATOR 3.3 V OUTCPU BUS USB REGISTERS REGOUT Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Overview MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.3.1 USB Protocol

Figure 9-2 shows the various transaction types supported by the MC68HC08KL8 USB module. The transactions are portrayed as error free. The effect of errors in the data flow are discussed later. Figure 9-2. Supported Transaction Types Per Endpoint ACK ACK ACK ACKACK SETUP IN OUT DATA0/1 DATA0 DATA1ACK DATA1 ACK OUT ACKOUT DATA0 ACK ACK DATA0/1 ENDPOINT 0 TRANSACTIONS: CONTROL WRITE CONTROL READ NO-DATA CONTROL ENDPOINTS 1 AND 2 TRANSACTIONS: INTERRUPT BULK TRANSMIT SETUP DATA0 DATA1IN DATA0IN DATA0/1IN SETUP DATA0 IN DATA1 ACK DATA1 ACK OUT IN ACK DATA0/1IN ACK KEY: UNRELATED BUS TRAFFIC HOST GENERATED DEVICE GENERATED Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB) Each USB transaction is comprised of a series of packets. The MC68HC08KL8 USB module supports the packet types shown inFigure 9-3. Token packets are generated by the USB host and decoded by the USB device. Data and handshake packets are both decoded and generated by the USB device, depending on the type of transaction. Figure 9-3. Supported USB Packet Types The following subsections detail each segment used to form a complete USB transaction. Token Packet: IN OUT SYNC PID PID ADDR ENDP CRC5 EOP SETUP Data Packet: DATA0 SYNC PID PID DATA CRC16 EOP DATA1 0 – 8 Bytes Handshake Packet: ACK NAK SYNC PID PID EOP STALL Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Overview MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.3.1.1 Sync Pattern

The NRZI (see9.5.4.1 Data Encoding/Decoding) bit pattern shown in Figure 9-4is used as a synchronization pattern and is prefixed to each packet. This pattern is equivalent to a data pattern of seven 0s followed by a 1 ($80). Figure 9-4. Sync Pattern The start of a packet (SOP) is signaled by the originating port by driving the D+ and D– lines from the idle state (also referred to as the J state) to the opposite logic level (also referred to as the K state). This switch in levels represents the first bit of the sync field.Figure 9-5shows the data signaling and voltage levels for the start-of-packet and the sync pattern. Figure 9-5. SOP, Sync Signaling, and Voltage Levels NRZI DATA ENCODING SYNC PATTERN PID0BUS IDLE PID1 VOH (MIN) VSE (MAX) VSE (MIN) VOL (MAX) VSS END OF SYNC FIRST BIT OF PACKET SOPBUS IDLE Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.3.1.2 Packet Identifier Field

The packet identifier field is an 8-bit number comprised of the 4-bit packet identification and its complement. The field follows the sync pattern and determines the direction and type of transaction on the bus. Table 9-1 shows the packet identifier values for the supported packet types.

9.3.1.3 Address Field (ADDR)

The address field is a 7-bit number that is used to select a particular USB device. This field is compared to the lower seven bits of the UADDR register to determine if a given transaction is targeting the MC68HC08KL8 USB device.

9.3.1.4 Endpoint Field (ENDP)

The endpoint field is a 4-bit number that is used to select a particular endpoint within a USB device. For the MC68HC08KL8, this will be a binary number between 0 and 2 inclusive. Any other value will cause the transaction to be ignored. Table 9-1. Supported Packet Identifiers Packet Identifier Value Packet Identifier Type %1001 IN Token %0001 OUT Token %1101 SETUP Token %0011 DATA0 Packet %1011 DATA1 Packet %0010 ACK Handshake %1010 NAK Handshake %1110 STALL Handshake Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Overview MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.3.1.5 Cyclic Redundancy Check (CRC)

Cyclic redundancy checks are used to verify the address and data stream of a USB transaction. This field is five bits wide for token packets and 16 bits wide for data packets. CRCs are generated in the transmitter and sent on the USB data lines after both the endpoint field and the data field.Figure 9-6 shows how the 5-bit CRC value is calculated from the data stream and verified for the address and endpoint fields of a token packet.Figure 9-7 shows how the 16-bit CRC value is calculated and either transmitted or verified for the data packet of a given transaction. Figure 9-6. CRC Block Diagram for Token Packets MUX 00 1 0 1 01 1 0 0 NEXT BIT DATA STREAM – UPDATE EVERY BIT TIME – PRESET TO ONES AT SOP EQUAL?GOOD CRC BAD CRC Y N EXPECTED RESIDUAL GENERATOR POLYNOMIAL Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB) Figure 9-7. CRC Block Diagram for Data Packets MUX NEXT BIT INPUT/OUTPUT – UPDATE EVERY BIT TIME – RESET TO ONES AT SOP EQUAL?GOOD CRC BAD CRC Y N EXPECTED RESIDUAL: GENERATOR POLYNOMIAL DATA STREAM OUTPUT DATA STREAM CRC16 IS TRANSMITTED MSB FIRST AFTER FINAL DATA BYTE. TRANSMIT RECEIVE 000 00100 00 00 1 10 10 0000 010 00 0 00010 1 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Overview MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.3.1.6 End-of-Packet (EOP)

The single-ended 0 (SE0) state is used to signal an end-of-packet (EOP). The single-ended 0 state is indicated by both D+ and D– being below 0.8 V. EOP will be signaled by driving D+ and D– to the single- ended 0 state for two bit times followed by driving the lines to the idle state for one bit time. The transition from the single-ended 0 to the idle state defines the end of the packet. The idle state is asserted for one bit time and then both the D+ and D– output drivers are placed in their high- impedance state. The bus termination resistors hold the bus in the idle state.Figure 9-8shows the data signaling and voltage levels for an end- of-packet transaction. Figure 9-8. EOP Transaction Voltage Levels The width of the SE0 in the EOP is about two bit times. The EOP width is measured with the same capacitive load used for maximum rise and fall times and is measured at the same level as the differential signal crossover points of the data lines. Figure 9-9. EOP Width Timing VOH (MIN) VSE (MAX) VSE (MIN) VOL (MAX) VSS BUS DRIVEN TOLAST BIT OF BUS IDLE EOP STROBE PACKET IDLE STATE BUS FLOATS EOP WIDTH tPeriod DIFFERENTIAL DATA LINES DATA CROSSOVER LEVEL Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.3.2 Reset Signaling

A reset is signaled on the bus by the presence of an extended SE0 at the USB data pins of a device. The reset signaling is specified to be present for a minimum of 10 ms. An active device (powered and not in the suspend state) seeing a single-ended 0 on its USB data inputs for more than 2.5µs may treat that signal as a reset, but must have interpreted the signaling as a reset within 5.5µs. For a low-speed device, an SE0 condition between four and eight low-speed bit times represents a valid USB reset. A USB sourced reset will hold the 68HC6808KL8 in reset for the duration of the reset on the USB bus. The USB bit in the reset status register (RSR) will be set after the internal reset is removed. Refer to8.8.2 Reset Status Registerfor more detail. The MCU’s reset recovery sequence is detailed inSection 8. System Integration Module (SIM). The reset flag bit (RSTF) in the USB interrupt register 0 (UIR0) also will be set after the internal reset is removed. Refer to9.6.2 USB Interrupt Register 0 for more detail. After a reset is removed, the device will be in the attached, but not yet addressed or configured state (refer to Section 9.1 USB Device States of theUniversal Serial Bus SpecificationRev. 1.0). The device must be able to accept a device address via a SET_ADDRESS command (refer to Section 9.4 Standard Device Request in theUniversal Serial Bus Specification Rev. 1.0) no later than 10 ms after the reset is removed. Reset can wake a device from the suspended mode. A device may take up to 10 ms to wake up from the suspended state. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Overview MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.3.3 Suspend

The MC68HC08KL8 supports suspend mode for low power. Suspend mode should be entered when the USB data lines are in the idle state for more than 3.0 ms. Entry into suspend mode is controlled by the SUSPND bit in the USB interrupt register. Any low-speed bus activity should keep the device out of the suspend state. Low-speed devices are kept awake by periodic low-speed EOP signals from the host. This is referred to as low speed keep alive (refer to Section 11.2.5.1 of the Universal Serial Bus Specification Rev. 1.0). Firmware should monitor the EOPF flag and enter suspend mode by setting the SUSPND bit if an EOP is not detected for 3 ms. Per the USB specification, the MC68HC08KL8 is required to draw less than 500µA from the VDD supply when it is in the suspend state. This includes the current supplied by the voltage regulator to the 15 kΩ to ground termination resistors placed at the host end of the USB bus. This low-current requirement means that firmware is responsible for entering stop mode once the USB module has been placed in the suspend state.

9.3.4 Resume After Suspend

The MC68HC08KL8 can be activated from the suspend state by normal bus activity, a USB reset signal, or by a forced resume driven from the MC68HC08KL8.

9.3.4.1 Host Initiated Resume

The host signals resume by initiating resume signalling (K state) for at least 20 ms followed by a standard low-speed EOP signal. This 20 ms ensures that all devices in the USB network are awakened. After resuming the bus, the host must begin sending bus traffic within 3 ms to prevent the device from re-entering suspend mode. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.3.4.2 USB Reset Signalling

Reset can wake a device from the suspended mode. A device may take up to 10 ms to wake up from the suspended state.

9.3.4.3 Remote Wakeup

The MC68HC08KL8 also supports the remote wakeup feature. The firmware has the ability to exit suspend mode by signaling a resume state to the upstream host or hub. A non-idle state (K state) on the USB data lines is accomplished by asserting the FRESUM bit in the UCR1 register. When using the remote wakeup capability, the firmware must wait for at least 5 ms after the bus is in the idle state before sending the remote wakeup resume signaling. This allows the upstream devices to get into their suspend state and prepare for propagating resume signaling. The FRESUM bit should be asserted to cause the resume state on the USB data lines for at least 10 ms, but not more than 15 ms. Note that the resume signalling is controlled by the FRESUM bit and meeting the timing specifications is dependent on the firmware. When FRESUM is cleared by firmware, the data lines will return to their high-impedance state. Refer to the register definitions (see9.6.5 USB Control Register 1) for more information about how the force resume (FRESUM) bit can be used to initiate the remote wakeup feature. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Clock Requirements MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.3.5 Low-Speed Device

Externally, low-speed devices are configured by the position of a pullup resistor on the USB D– pin of the MC68HC08KL8. Low-speed devices are terminated as shown inFigure 9-10 with the pullup on the D– line. Figure 9-10. External Low-Speed Device Configuration For low-speed transmissions, the transmitter’s EOP width must be between 1.25µs and 1.50µs. These ranges include timing variations due to differential buffer delay and rise/fall time mismatches and to noise and other random effects. A low-speed receiver must accept a 670-ns SE0 followed by a J transition as a valid EOP. An SE0 shorter than 330 ns or an SE0 not followed by a J transition must be rejected as an EOP. An EOP between 330 ns and 670 ns may be rejected or accepted as discussed. Any SE0 that is 2.5µs or longer is automatically a reset.

9.4 Clock Requirements

The low-speed data rate is nominally 1.5 Mbs. The CGMXCLK signal driven by the oscillator circuits is the clock source for the USB module and requires that a 6-MHz oscillator circuit be connected to the OSC1 and OSC2 pins. The permitted frequency tolerance for low-speed functions is approximately±1.5% (15,000 ppm). This tolerance includes inaccuracies from all sources: initial frequency accuracy, crystal capacitive loading, supply voltage on the oscillator, temperature, and aging. The jitter in the low-speed data rate must be less than 10 ns. This tolerance allows the use of resonators in low-cost, low-speed devices. MC68HC08KL8 1.5 kΩ 3.3-V REGULATOR OUT USB LOW-SPEED CABLE. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.5 Hardware Description

The USB module as previously shown inFigure 9-1 contains four functional blocks: a 3.3-volt regulator, a low-speed USB transceiver, the USB control logic, and the USB registers. The following subsections detail the function of the regulator, transceiver, and control logic. See9.6 I/O Register Description for the register discussion.

9.5.1 Voltage Regulator

The USB data lines are required by the USB specification to have a maximum output voltage between 2.8 V and 3.6 V. The data lines also are required to have an external 1.5-kΩ pullup resistor connected between data lines and a voltage source between 3.0 V and 3.6 V. Since the power provided by the USB cable is specified to be between 4.4 V and 5.0 V, an on-chip regulator is used to drop the voltage to the appropriate level for sourcing the USB transceiver and external pullup resistor. An output pin driven by the regulator voltage is provided to source the 1.5-kΩ external resistor. The REGOUT pin requires an external bulk capacitor 1µF or larger and a 0.1-µF ceramic bypass capacitor.Figure 9-11 shows the worst case electrical connection for the voltage regulator. Figure 9-11. Regulator Electrical Connections LOW-SPEED TRANSCEIVER 3.3-V R2 R2 R1 = 1.5 kΩ± 5% R2 = 15 kΩ± 5% REGULATOR USB DATA LINES HOST OR HUB USB CABLE 4.4 V REGOUT VDDREG MC68HC08KL8 VSSREG

2 CAPACITORS

— BULK CAPACITOR > 1 µF — BYPASS CAPACITOR 0.1 µF Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Hardware Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.5.2 Regulator Bypass Option

Under normal user operation, the REGOUT voltage is sourced from the 3.3-volt regulator. The transceiver is powered by the regulator and the VDDREG input. For testability of the transceiver, the 3.3-volt regulator has a bypass option that allows the REGOUT and USB transceiver power to be sourced from the VDDREG input. NOTE: The bypass mode is to be used for transceiver testing and should not be used in normal operation. See Section 5. Mask Option Register (MOR) for setting the bypass option.Figure 9-12 illustrates operation of the REGBP bit in the mask option register. Figure 9-12. Regulator Bypass Option TRANSCEIVER REGULATOR VDDREG REGOUT REGBP ON OFF FEEDBACK Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.5.3 USB Transceiver

The USB transceiver provides the physical interface to the USB D+ and D– data lines. The transceiver is composed of two parts: an output drive circuit and a receiver.

9.5.3.1 Output Driver Characteristics

The USB transceiver uses a differential output driver to drive the USB data signal onto the USB cable. The static output swing of the driver in its low state is below the VOL of 0.3 V with a 1.5-kΩ load to 3.6 V and in its high state is above the VOH of 2.8 V with a 15-kΩ load to ground. The output swings between the differential high and low state are well balanced to minimize signal skew. Slew rate control on the driver is used to minimize the radiated noise and cross talk. The driver’s outputs support 3-state operation to achieve bidirectional half duplex operation. The driver can tolerate a voltage on the signal pins of –0.5 V to 3.8 V with respect to local ground reference without damage. 9.5.3.2 Low Speed (1.5 Mbs) Driver Characteristics The rise and fall time of the signals on this cable are greater than 75 ns to keep RFI (radio frequency interference) emissions under FCC (Federal Communications Commission) class B limits and less than 300 ns to limit timing delays, signaling skews, and distortions. The driver reaches the specified static signal levels with smooth rise and fall times and minimal reflections and ringing when driving the cable. This driver is used only on network segments between low-speed devices and the ports to which they are connected. USB data transmission is done with differential signals. A differential input receiver is used to accept the USB data signal. A differential 1 on the bus is represented by D+ being at least 200 mV more positive than D– as seen at the receiver, and a differential 0 is represented by D– being at least 200 mV more positive than D+ as seen at the receiver. The signal crossover point must be between 1.3 V and 2.0 V. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.5.3.3 Receiver Data Jitter

The data receivers for all types of devices must be able to properly decode the differential data in the presence of jitter. The more of the bit time that any data edge can occupy and still be decoded, the more reliable the data transfer will be. Data receivers are required to decode differential data transitions that occur in a window plus and minus a nominal quarter bit time from the nominal (centered) data edge position. Jitter will be caused by the delay mismatches and by mismatches in the source and destination data rates (frequencies). The receive data jitter budget for low speed is given inSection 17. Electrical Specifications. The specification includes the consecutive (next) and paired transition values for each source of jitter.

9.5.3.4 Data Source Jitter

The source of data can have some variation (jitter) in the timing of edges of the data transmitted. The time between any set of data transitions is N * tPeriod± jitter time, where N is the number of bits between the transitions and tPeriodis defined as the actual period of the data rate. The data jitter is measured with the same capacitive load used for maximum rise and fall times and is measured at the crossover points of the data lines as shown inFigure 9-15. Figure 9-15. Data Jitter CONSECUTIVE TRANSITIONS tPeriod DIFFERENTIAL DATA LINES CROSSOVER POINTS PAIRED TRANSITIONS Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Hardware Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED For low-speed transmissions, the jitter time for any consecutive differential data transitions must be within±25 ns and within±10 ns for any set of paired differential data transitions. These jitter numbers include timing variations due to differential buffer delay, rise/fall time mismatches, internal clock source jitter, noise and other random effects.

9.5.3.5 Data Signal Rise and Fall Time

The output rise time and fall time are measured between 10% and 90% of the signal. Edge transition time for the rising and falling edges of low- speed signals is 75 ns (minimum) into a capacitive load (CL)o f5 0p Fa n d 300 ns (maximum) into a capacitive load of 350 pF. The rising and falling edges should be transitioning (monotonic) smoothly when driving the cable to avoid excessive EMI (electro-magnetic interference). Figure 9-16. Data Signal Rise and Fall Time tR DIFFERENTIAL DATA LINES tF RISE TIME FALL TIME 10% 90% 90% 10% LOW SPEED: 75 ns at CL = 50 pF , 300 ns at CL = 350 pF CL CL Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.5.4 USB Control Logic

The USB control logic manages data movement between the CPU and the transceiver. The control logic handles both transmit and receive operations on the USB. It contains the logic used to manipulate the transceiver and the endpoint registers. The byte count buffer is loaded with the active transmit endpoints byte count value during transmit operations. This same buffer is used for receive transactions to count the number of bytes received and, upon the end of the transaction, transfer that number to the receive endpoints byte count register. When transmitting, the control logic handles parallel-to-serial conversion, CRC generation, NRZI encoding, and bit stuffing. When receiving, the control logic handles sync detection, packet identification, end-of-packet detection, bit (un)stuffing, NRZI decoding, CRC validation, and serial-to-parallel conversion. Errors detected by the control logic include bad CRC, timeout while waiting for EOP, and bit stuffing violations. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) Hardware Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.5.4.1 Data Encoding/Decoding

The USB employs NRZI data encoding when transmitting packets. In NRZI encoding, a 1 is represented by no change in level and a 0 is represented by a change in level.Figure 9-17shows a data stream and the NRZI equivalent andFigure 9-18 is a flow diagram for NRZI. The high level represents the J state on the data lines in this and subsequent figures showing NRZI encoding. A string of 0s causes the NRZI data to toggle each bit time. A string of 1s causes long periods with no transitions in the data. Figure 9-17. NRZI Data Encoding Figure 9-18. Flow Diagram for NRZI IDLEDATA 0 1 1 0101000100110 IDLENRZI POWER-UP NO PACKET TRANSMISSION IDLE BEGIN PACKET FETCH THE DATA BIT NO YES NO DATA TRANSITION TRANSITION IS PACKAGE TRANSFER DONE? NO YES DATA TRANSMISSION IS DATA BIT = 0? Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.5.4.2 Bit Stuffing

To ensure adequate signal transitions, bit stuffing is employed by the transmitting device when sending a packet on the USB (seeFigure 9- 19 and Figure 9-20). A 0 is inserted after every six consecutive 1s in the data stream before the data is NRZI encoded to force a transition in the NRZI data stream. This gives the receiver logic a data transition at least once every seven bit times to guarantee the data and clock lock. The receiver must decode the NRZI data, recognize the stuffed bits, and discard them. Bit stuffing is enabled beginning with the sync pattern and throughout the entire transmission. The data 1 that ends the sync pattern is counted as the first 1 in a sequence. Bit stuffing is always enforced, without exception. If required by the bit stuffing rules, a 0 bit will be inserted even if it is the last bit before the end-of-packet (EOP) signal. Figure 9-19. Bit Stuffing IDLE NRZI ENCODED DATA BIT STUFFED DATA RAW DATA STUFFED BIT SYNC PATTERN PACKET DATA PACKET DATASYNC PATTERN PACKET DATASYNC PATTERN SIX ONES Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED Figure 9-20. Flow Diagram for Bit Stuffing

9.6 I/O Register Description

The USB endpoint registers are comprised of a set of control/status registers and 24 data registers that provide storage for the buffering of data between USB and the CPU. SeeFigure 9-21. POWER-UP NO PACKET TRANSMISSION IDLE NO YES IS PACKAGE TRANSFER DONE? NO YES RESET THE BIT COUNTER TO 0 INSERT A ZERO BIT COUNTER = 6? INCREMENT THE COUNTER = 0 = 1BIT VALUE? GET NEXT BIT RESET BIT COUNTER TO 0 BEGIN PACKET TRANSMISSION Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB) Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 $0020 USB Endpoint 0 Data Register 0 (UE0D0) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0021 USB Endpoint 0 Data Register 1 (UE0D1) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0022 USB Endpoint 0 Data Register 2 (UE0D2) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0023 USB Endpoint 0 Data Register 3 (UE0D3) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0024 USB Endpoint 0 Data Register 4 (UE0D4) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0025 USB Endpoint 0 Data Register 5 (UE0D5) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0026 USB Endpoint 0 Data Register 6 (UE0D6) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset $0027 USB Endpoint 0 Data Register 7 (UE0D7) Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: Indeterminate after Reset = Unimplemented X = Indeterminate Figure 9-21. Register Summary (Sheet 1 of 3) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED $0028 USB Endpoint 1/2 Data Register 0 (UE1D0) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $0029 USB Endpoint 1/2 Data Register 1 (UE1D1) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002A USB Endpoint 1/2 Data Register 2 (UE1D2) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002B USB Endpoint 1/2 Data Register 3 (UE1D3) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002C USB Endpoint 1/2 Data Register 4 (UE1D4) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002D USB Endpoint 1/2 Data Register 5 (UE1D5) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002E USB Endpoint 1/2 Data Register 6 (UE1D6) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset $002F USB Endpoint 1/2 Data Register 7 (UE1D7) Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: Indeterminate after Reset Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented X = Indeterminate Figure 9-21. Register Summary (Sheet 2 of 3) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB) $0037 USB Control Register 2 (UCR2) Read: 0 0 TX1ST 0 ENABLE2 ENABLE1 STALL2 STALL1 Write: RSTFR TX1STR Reset: 0 0 0 0 0 0 0 0 $0038 USB Address Register (UADDR) Read: USBEN UADD6 UADD5 UADD4 UADD3 UADD2 UADD1 UADD0 Write: Reset: 0 0 0 0 0 0 0 0 $0039 USB Interrupt Register 0 (UIR0) Read: TXD0F RXD0F RSTF SUSPND TXD0IE RXD0IE Write: TXD0FR RXD0FR Reset: 0 0 0 0 0 0 0 0 $003A USB Interrupt Register 1 (UIR1) Read: TXD1F EOPF RESUMF 0 TXD1IE EOPIE Write: RESUMFR TXD1FR EOPFR Reset: 0 0 0 0 0 0 0 0 $003B USB Control Register 0 (UCR0) Read: T0SEQ STALL0 TX0E RX0E TP0SIZ3 TP0SIZ2 TP0SIZ1 TP0SIZ0 Write: Reset: 0 0 0 0 0 0 0 0 $003C USB Control Register 1 (UCR1) Read: T1SEQ ENDADD TX1E FRESUM TP1SIZ3 TP1SIZ2 TP1SIZ1 TP1SIZ0 Write: Reset: 0 0 0 0 0 0 0 0 $003D USB Status Register (USR) Read: RSEQ SETUP RPSIZ3 RPSIZ2 RPSIZ1 RPSIZ0 Write: Reset: X X X X X X Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented X = Indeterminate Figure 9-21. Register Summary (Sheet 3 of 3) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.6.1 USB Address Register

USBEN — USB Module Enable This read/write bit enables and disables the USB module and the USB pins. When USBEN is clear, the USB module will not respond to any traffic. Reset clears this bit. 1 = USB function enabled 0 = USB function disabled NOTE: The user must set this bit before the USB module will recognize USB reset signalling. UADD6–UADD0 — USB Function Address These bits specify the USB address of the device. Reset clears these bits. Address: $0038 Bit 7 654321 Bit 0 Read: USBEN UADD6 UADD5 UADD4 UADD3 UADD2 UADD1 UADD0 Write: Reset: 00000000 Figure 9-22. USB Address Register (UADDR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.6.2 USB Interrupt Register 0

TXD0F — Endpoint 0 Data Transmit Flag This read-only bit is set after the data stored in endpoint 0 transmit buffers has been sent and an ACK handshake packet from the host is received. Once the next set of data is ready in the transmit buffers, software must clear this flag by writing a logic 1 to the TXD0FR bit. To enable the next data packet transmission, TX0E also must be set. If the TXD0F bit is not cleared, a NAK handshake will be returned in the next IN transaction. Reset clears this bit. Writing to TXD0F has no effect. 1 = Transmit on endpoint 0 has occurred. 0 = Transmit on endpoint 0 has not occurred. RXD0F — Endpoint 0 Data Receive Flag This read-only bit is set after the USB module has received a data packet and responded with an ACK handshake packet. Software must clear this flag by writing a logic 1 to the RXD0FR bit after all of the received data has been read. Software also must set the RX0E bit to 1 to enable the next data packet reception. If the RXD0F bit is not cleared, a NAK handshake will be returned in the next OUT transaction. Reset clears this bit. Writing to RXD0F has no effect. 1 = Receive on endpoint 0 has occurred. 0 = Receive on endpoint 0 has not occurred. Address: $0039 Bit 7 654321 Bit 0 Read: TXD0F RXD0F RSTF SUSPND TXD0IE RXD0IE 0 0 Write: TXD0FR RXD0FR Reset: 00000000 = Unimplemented Figure 9-23. USB Interrupt Register 0 (UIR0) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED RSTF — USB Reset Flag This read-only bit is set when a valid reset signal state is detected on the D+ and D– lines. This reset detection will also generate an internal reset signal to reset the CPU and other peripherals including the USB module. This bit is cleared by writing a logic 1 to the RSTFR bit in the UCR2 register. This bit also is cleared by a POR reset. NOTE: The RSTF bit is included to maintain backward compatibility with the 68HC705JB2 USB implementation. The USB bit in the RSR register (see8.8.2 Reset Status Register) is also a USB reset indicator. SUSPND — USB Suspend Flag To save power, this read/write bit should be set by the software if a 3-ms constant idle state is detected on the USB bus. Setting this bit puts the transceiver and regulator into a power-saving mode. This bit is automatically cleared by hardware when the resume flag (RESUMF) is set. TXD0IE — Endpoint 0 Transmit Interrupt Enable This read/write bit enables the transmit endpoint 0 to generate CPU interrupt requests when the TXD0F bit becomes set. Reset clears the TXD0IE bit. 1 = Transmit endpoint 0 can generate a CPU interrupt request. 0 = Transmit endpoint 0 cannot generate a CPU interrupt request. RXD0IE — Endpoint 0 Receive Interrupt Enable This read/write bit enables the receive endpoint 0 to generate CPU interrupt requests when the RXD0F bit becomes set. Reset clears the RXD0IE bit. 1 = Receive endpoint 0 can generate a CPU interrupt request. 0 = Receive endpoint 0 cannot generate a CPU interrupt request. TXD0FR — Endpoint 0 Transmit Flag Reset Writing a logic 1 to this write-only bit will clear the TXD0F bit if it is set. Writing a logic 0 to TXD0FR has no effect. Reset clears this bit. RXD0FR — Endpoint 0 Receive Flag Reset Writing a logic 1 to this write-only bit will clear the RXD0F bit if it is set. Writing a logic 0 to RXD0FR has no effect. Reset clears this bit. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.6.3 USB Interrupt Register 1

TXD1F — Endpoint 1/Endpoint 2 Data Transmit Flag This read-only bit is shared by endpoint 1 and endpoint 2. It is set after the data stored in the shared endpoint 1/endpoint 2 transmit buffer has been sent and an ACK handshake packet from the host is received. Once the next set of data is ready in the transmit buffers, software must clear this flag by writing a logic 1 to the TXD1FR bit. To enable the next data packet transmission, TX1E also must be set. If the TXD1F bit is not cleared, a NAK handshake will be returned in the next IN transaction. Reset clears this bit. Writing to TXD1F has no effect. 1 = Transmit on endpoint 1 or endpoint 2 has occurred. 0 = Transmit on endpoint 1 or endpoint 2 has not occurred. EOPF — End-of-Packet Detect Flag This read-only bit is set when a valid end-of-packet sequence is detected on the D+ and D– lines. Software must clear this flag by writing a logic 1 to the EOPFR bit. Reset clears this bit. Writing to EOPF has no effect. 1 = End-of-packet sequence has been detected. 0 = End-of-packet sequence has not been detected. Address: $003A Bit 7 6 5 4 3 2 1 Bit 0 Read: TXD1F EOPF RESUMF 0 TXD1IE EOPIE 0 0 Write: RESUMFR TXD1FR EOPFR Reset: 00000000 = Unimplemented Figure 9-24. USB Interrupt Register 1 (UIR1) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED RESUMF — Resume Flag This read-only bit is set when USB bus activity is detected while the SUSPND bit is set. Software must clear this flag by writing a logic 1 to the RESUMFR bit. Reset clears this bit. Writing a logic 0 to RESUMF has no effect. 1 = USB bus activity has been detected. 0 = No USB bus activity has been detected. RESUMFR — Resume Flag Reset Writing a logic 1 to this write-only bit will clear the RESUMF bit if it is set. Writing to RESUMFR has no effect. Reset clears this bit. TXD1IE — Endpoint 1/Endpoint 2 Transmit Interrupt Enable This read/write bit enables the USB to generate CPU interrupt requests when the shared transmit endpoint 1/endpoint 2 interrupt flag (TXD1F) bit becomes set. Reset clears the TXD1IE bit. 1 = Transmit endpoints 1 and 2 can generate a CPU interrupt request. 0 = Transmit endpoints 1 and 2 cannot generate a CPU interrupt request. EOPIE — End-of-Packet Detect Interrupt Enable This read/write bit enables the USB to generate CPU interrupt requests when the EOPF bit becomes set. Reset clears the EOPIE bit. 1 = End-of-packet sequence detection can generate a CPU interrupt request. 0 = End-of-packet sequence detection cannot generate a CPU interrupt request. TXD1FR — Endpoint 1/Endpoint 2 Transmit Flag Reset Writing a logic 1 to this write-only bit will clear the TXD1F bit if it is set. Writing a logic 0 to TXD1FR has no effect. Reset clears this bit. EOPFR — End-of-Packet Flag Reset Writing a logic 1 to this write-only bit will clear the EOPF bit if it is set. Writing a logic 0 to the EOPFR has no effect. Reset clears this bit. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.6.4 USB Control Register 0

T0SEQ — Endpoint 0 Transmit Sequence Bit This read/write bit determines which type of data packet (DATA0 or DATA1) will be sent during the next IN transaction directed at endpoint 0. Toggling of this bit must be controlled by software. Reset clears this bit. 1 = DATA1 token active for next endpoint 0 transmit 0 = DATA0 token active for next endpoint 0 transmit STALL0 — Endpoint 0 Force Stall Bit This read/write bit causes endpoint 0 to return a STALL handshake when polled by either an IN or OUT token by the USB host controller. The USB hardware clears this bit when a SETUP token is received. Reset clears this bit. 1 = Send STALL handshake. 0 = Default TX0E — Endpoint 0 Transmit Enable This read/write bit enables a transmit to occur when the USB host controller sends an IN token to endpoint 0. Software should set this bit when data is ready to be transmitted. It must be cleared by software when no more endpoint 0 data needs to be transmitted. If this bit is 0 or the TXD0F is set, the USB will respond with a NAK handshake to any endpoint 0 IN tokens. Reset clears this bit. 1 = Data is ready to be sent. 0 = Data is not ready. Respond with NAK. Address: $003B Bit 7 654321 Bit 0 Read: T0SEQ STALL0 TX0E RX0E TP0SIZ3 TP0SIZ2 TP0SIZ1 TP0SIZ0 Write: Reset: 00000000 Figure 9-25. USB Control Register 0 (UCR0) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED RX0E — Endpoint 0 Receive Enable This read/write bit enables a receive to occur when the USB host controller sends an OUT token to endpoint 0. Software should set this bit when data is ready to be received. It must be cleared by software when data cannot be received. If this bit is 0 or the RXD0F is set, the USB will respond with a NAK handshake to any endpoint 0 OUT tokens. Reset clears this bit. 1 = Data is ready to be received. 0 = Not ready for data. Respond with NAK. TP0SIZ3–TP0SIZ0 — Endpoint 0 Transmit Data Packet Size These read/write bits store the number of transmit data bytes for the next IN token request for endpoint 0. These bits are cleared by reset. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.6.5 USB Control Register 1

T1SEQ — Endpoint1/Endpoint 2 Transmit Sequence Bit This read/write bit determines which type of data packet (DATA0 or DATA1) will be sent during the next IN transaction directed to endpoint 1 or endpoint 2. Toggling of this bit must be controlled by software. Reset clears this bit. 1 = DATA1 token active for next endpoint 1/endpoint 2 transmit 0 = DATA0 token active for next endpoint 1/endpoint 2 transmit ENDADD — Endpoint Address Select This read/write bit specifies whether the data inside the registers UE1D0–UE1D7 are used for endpoint 1 or endpoint 2. If all the conditions for a successful endpoint 2 USB response to a host IN token are satisfied (TXD1F = 0, TX1E = 1, STALL2 = 0, and ENABLE2 = 1) except that the ENDADD bit is configured for endpoint 1, the USB responds with a NAK handshake packet. 1 = Data buffers used for endpoint 2 0 = Data buffers used for endpoint 1 Address: $003C Bit 7 654321 Bit 0 Read: T1SEQ ENDADD TX1E FRESUM TP1SIZ3 TP1SIZ2 TP1SIZ1 TP1SIZ0 Write: Reset: 00000000 Figure 9-26. USB Control Register 1 (UCR1) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED TX1E — Endpoint 1/Endpoint 2 Transmit Enable This read/write bit enables a transmit to occur when the USB host controller sends an IN token to endpoint 1 or endpoint 2. The appropriate endpoint enable bit, ENABLE1 or ENABLE2 bit in the UCR2 register, also should be set. Software should set the TX1E bit when data is ready to be transmitted. It must be cleared by software when no more data needs to be transmitted. If this bit is 0 or the TXD1F is set, the USB will respond with a NAK handshake to any endpoint 1 or endpoint 2 directed IN tokens. Reset clears this bit. 1 = Data is ready to be sent. 0 = Data is not ready. Respond with NAK. FRESUM — Force Resume This read/write bit forces a resume state (K or non-idle state) onto the USB data lines to initiate a remote wakeup. Software should control the timing of the forced resume to be between 10 and 15 ms. Setting this bit will not cause the RESUMF bit to be set. 1 = Force data lines to K state 0 = Default TP1SIZ3–TP1SIZ0 — Endpoint 1/Endpoint 2 Transmit Data Packet Size These read/write bits store the number of transmit data bytes for the next IN token request for endpoint 1 or endpoint 2. These bits are cleared by reset. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.6.6 USB Control Register 2

RSTFR — Clear Reset Indicator Bit Writing a logic 1 to this write-only bit will clear the RSTF bit in the UIR0 register if it is set. Writing a logic 0 to the RSTFR has no effect. Reset clears this bit. TX1STR — Clear Transmit First Flag Writing a logic 1 to this write-only bit will clear the TX1ST bit if it is set. Writing a logic 0 to the TX1STR has no effect. Reset clears this bit. TX1ST — Transmit First Flag This read-only bit is set if the endpoint 0 data transmit flag (TXD0F) is set when the USB control logic is setting the endpoint 0 data receive flag (RXD0F). In other words, if an unserviced endpoint 0 transmit flag is still set at the end of an endpoint 0 reception, then this bit will be set. This bit lets the firmware know that the endpoint 0 transmission happened before the endpoint 0 reception. Reset clears this bit. 1 = IN transaction occurred before SETUP/OUT. 0 = IN transaction occurred after SETUP/OUT. ENABLE2 — Endpoint 2 Enable This read/write bit enables endpoint 2 and allows the USB to respond to IN packets addressed to endpoint 2. Reset clears this bit. 1 = Endpoint 2 is enabled and can respond to an IN token. 0 = Endpoint 2 is disabled. Address: $0037 Bit 7 654321 Bit 0 Read: 0 0 TX1ST 0 ENABLE2 ENABLE1 STALL2 STALL1 Write: RSTFR TX1STR Reset: 00000000 = Unimplemented Figure 9-27. USB Control Register 2 (UCR2) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED ENABLE1 — Endpoint 1 Enable This read/write bit enables endpoint 1 and allows the USB to respond to IN packets addressed to endpoint 1. Reset clears this bit. 1 = Endpoint 1 is enabled and can respond to an IN token. 0 = Endpoint 1 is disabled. STALL2 — Endpoint 2 Force Stall Bit This read/write bit causes endpoint 2 to return a STALL handshake when polled by either an IN or OUT token by the USB host controller. Reset clears this bit. 1 = Send STALL handshake. 0 = Default STALL1 — Endpoint 1 Force Stall Bit This read/write bit causes endpoint 1 to return a STALL handshake when polled by either an IN or OUT token by the USB host controller. Reset clears this bit. 1 = Send STALL handshake. 0 = Default Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.6.7 USB Status Register

RSEQ — Endpoint 0 Receive Sequence Bit This read-only bit indicates the type of data packet last received for endpoint 0 (DATA0 or DATA1). 1 = DATA1 token received in last endpoint 0 receive. 0 = DATA0 token received in last endpoint 0 receive. SETUP — SETUP Token Detect Bit This read-only bit indicates that a valid SETUP token has been received. 1 = Last token received for endpoint 0 was a SETUP token. 0 = Last token received for endpoint 0 was not a SETUP token. RPSIZ3–RPSIZ0 — Endpoint 0 Receive Data Packet Size These read-only bits store the number of data bytes received for the last OUT or SETUP transaction for endpoint 0. These bits are not affected by reset. Address: $003D Bit 7 654321 Bit 0 Read: RSEQ SETUP RPSIZ3 RPSIZ2 RPSIZ1 RPSIZ0 Write: Reset: XX XXXX = Unimplemented X = Indeterminate Figure 9-28. USB Status Register (USR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) I/O Register Description MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.6.8 USB Endpoint 0 Data Registers

UE0RD7–UE0RD0 — Endpoint 0 Receive Data Buffer These read-only bits are serially loaded with OUT token or SETUP token data directed at endpoint 0. The data is received over the USB’s D+ and D– pins. UE0TD7–UE0TD0 — Endpoint 0 Transmit Data Buffer These write-only buffers are loaded by software with data to be sent on the USB bus on the next IN token directed at endpoint 0. UE0D0 Address: $0020 Bit 7 654321 Bit 0 Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: XXXXXXXX UE0D7 Address: $0027 Read: UE0RD7 UE0RD6 UE0RD5 UE0RD4 UE0RD3 UE0RD2 UE0RD1 UE0RD0 Write: UE0TD7 UE0TD6 UE0TD5 UE0TD4 UE0TD3 UE0TD2 UE0TD1 UE0TD0 Reset: XXXXXXXX X = Indeterminate Figure 9-29. USB Endpoint 0 Data Register (UE0D0–UE0D7) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.6.9 USB Endpoint 1/Endpoint 2 Data Registers

UE1TD7–UE1TD0 — Endpoint 1/ Endpoint 2 Transmit Data Buffer These write-only buffers are loaded by software with data to be sent on the USB bus on the next IN token directed at endpoint 1 or endpoint 2. These buffers are shared by endpoints 1 and 2 and depend on proper configuration of the ENDADD bit. UE1D0 Address: $0028 Bit 7 654321 Bit 0 Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: XXXXXXXX UE1D7 Address: $002F Bit 7 654321 Bit 0 Read: Write: UE1TD7 UE1TD6 UE1TD5 UE1TD4 UE1TD3 UE1TD2 UE1TD1 UE1TD0 Reset: XXXXXXXX = Unimplemented X = Indeterminate Figure 9-30. USB Endpoint 1/Endpoint 2 Data Register (UE1D0–UE1D7) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) USB Interrupts MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.7 USB Interrupts

The USB module is capable of generating interrupts and causing the CPU to execute the USB interrupt service routine. The three types of USB interrupts are:

• End-of-transaction interrupts — signify either a completed receive or transmit transaction
• Resume interrupts — signify that the USB bus is reactivated after having been suspended
• End-of-packet interrupts — signify that a low-speed end-of-packet signal was detected All USB interrupts share the same interrupt vector. Firmware is responsible for determining which interrupt is active.

9.7.1 USB End-of-Transaction Interrupt

There are three possible end-of-transaction interrupts:

• Endpoint 0 receive
• Endpoint 0 transmit
• Shared endpoint 1 or endpoint 2 transmit End-of-transaction interrupts occur as detailed in the following sections.

9.7.1.1 Receive Control Endpoint 0

For a control OUT transaction directed at endpoint 0, the USB module will generate an interrupt by setting the RXD0F flag in the UIR0 register. The conditions necessary for the interrupt to occur are shown in the flowchart inFigure 9-31. SETUP transactions cannot be stalled by the USB function. A SETUP received by a control endpoint will clear the STALL0 bit if it is set. The conditions for receiving a SETUP interrupt are shown inFigure 9-32. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB) Figure 9-31. OUT Token Data Flow for Receive Endpoint 0 NO RESPONSE FROM USB FUNCTION SEND NAK HANDSHAKE IGNORE TRANSACTION NO RESPONSE FROM USB FUNCTION NO INTERRUPT SEND STALL HANDSHAKE NO RESPONSE FROM USB FUNCTION TIMEOUT VALID OUT TOKEN RECEIVED FOR ENDPOINT 0 USB MODULE ENABLED? (USBEN = 1) ENDPOINT 0 RECEIVE READY TO RECEIVE? (RX0E = 1) AND (RXD0F = 0) ERROR FREE DATA PACKET? SET RXD0F TO 1 RECEIVE CONTROL ENDPOINT INTERRUPT ENABLED? (RXD0IE = 1) VALID TRANSACTION INTERRUPT GENERATED ENDPOINT 0 RECEIVE NOT STALLED? (STALL0 = 0) ACCEPT DATA VALID DATA TOKEN RECEIVED FOR ENDPOINT 0? N N N N N N Y Y Y Y Y Y SET/CLEAR RSEQ BIT Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) USB Interrupts MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED Figure 9-32. SETUP Token Data Flow for Receive Endpoint 0 STALL0 = 0? USB MODULE ENABLED? (USBEN = 1) VALID SETUP TOKEN RECEIVED FOR ENDPOINT 0 ERROR FREE DATA PACKET? NO RESPONSE FROM USB FUNCTION IGNORE TRANSACTION NO RESPONSE FROM USB FUNCTION SET RXD0F TO 1 RECEIVE CONTROL ENDPOINT INTERRUPT ENABLED? (RXD0IE = 1) NO INTERRUPTVALID TRANSACTION INTERRUPT GENERATED ACCEPT DATA SET SETUP TO 1 N N N Y Y Y Y Y N CLEAR STALL0 BIT ENDPOINT 0 RECEIVE READY TO RECEIVE? (RX0E = 1) AND (RXD0F = 0) N Y SET/CLEAR RSEQ BIT NO RESPONSE FROM USB FUNCTION Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.7.1.2 Transmit Control Endpoint 0

For a control IN transaction directed at endpoint 0, the USB module will generate an interrupt by setting the TXD0F flag in the UIR0 register. The conditions necessary for the interrupt to occur are shown in the flowchart inFigure 9-33. Figure 9-33. IN Token Data Flow for Transmit Endpoint 0 BY FIRMWARE? USB MODULE ENABLED? (USBEN = 1) TRANSMIT ENDPOINT READY TO TRANSFER? (TX0E = 1) AND (TXD0F = 0) NO RESPONSE FROM USB FUNCTION SEND NAK HANDSHAKE ACK RECEIVED AND NO SET TXD0F TO 1 TRANSMIT ENDPOINT INTERRUPT ENABLED? (TXD0IE = 1) NO INTERRUPT VALID TRANSACTION INTERRUPT GENERATED TRANSMIT ENDPOINT NOT STALLED (STALL0 = 0) SEND STALL HANDSHAKE SEND DATA DATA PID SET BY T0SEQ VALID IN TOKEN RECEIVED FOR ENDPOINT 0 N N N Y Y Y NO RESPONSE FROM USB FUNCTION N Y TIMEOUT CONDITION OCCUR? Y N Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Universal Serial Bus Module (USB) USB Interrupts MC68HC08KL8 — Rev. 2.0 General Release Specification Universal Serial Bus Module (USB) NON-DISCLOSURE AGREEMENT REQUIRED

9.7.1.3 Transmit Endpoint 1 and Transmit Endpoint 2

Transmit endpoints 1 and 2 share their interrupt flag. For an IN transaction directed at endpoint 1 or 2, the USB module will generate an interrupt by setting the TXD1F flag in the UIR1 register. The conditions necessary for the interrupt to occur are shown inFigure 9-34. Figure 9-34. IN Token Data Flow for Transmit Endpoint 1/Endpoint 2 NO RESPONSE FROM USB FUNCTION SEND NAK HANDSHAKE NO INTERRUPT SEND STALL HANDSHAKE N N N NO RESPONSE FROM USB FUNCTION N NO RESPONSE FROM USB FUNCTION N USB MODULE ENABLED? (USBEN = 1) TRANSMIT ENDPOINT READY TO TRANSFER? (TX1E = 1) AND (TXD1F = 0) AND SET TXD1F TO 1 TRANSMIT ENDPOINT INTERRUPT ENABLED (TXD1IE = 1) VALID TRANSACTION INTERRUPT GENERATED TRANSMIT ENDPOINT NOT STALLED BY FIRMWARE? SEND DATA DATA PID SET BY T1SEQ VALID IN TOKEN RECEIVED FOR ENDPOINTS 1 OR 2 Y Y Y Y ACK RECEIVED AND NO TIMEOUT CONDITION OCCURS? Y NOTES: ENDP2 is endpoint 2 directed traffic. TRANSMIT ENDPOINT ENABLED? ((ENABLE1 AND ENDP1) + (ENABLE2 AND ENDP2)) Y ENDP1 is endpoint 1 directed traffic. (STALL1 AND ENDP1) + (STALL2 AND ENDP2) ((ENDP2 AND ENDADD) + (ENDP1 AND ENDADD)) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Universal Serial Bus Module (USB) General Release Specification MC68HC08KL8 — Rev. 2.0 Universal Serial Bus Module (USB)

9.7.2 Resume Interrupt

The USB module will generate a CPU interrupt if low-speed bus activity is detected after entering the suspend state. A transition of the USB data lines to the non-idle state (K state) while in the suspend mode will set the RESUMF flag in the UIR1 register. There is no interrupt enable bit for this interrupt source and an interrupt will be executed if the I bit in the CCR is cleared. A resume interrupt can only occur while the MC68HC08KL8 is in the suspend mode.

9.7.3 End-of-Packet Interrupt

The USB module can generate a USB interrupt upon detection of an end-of-packet signal for low-speed devices. Upon detection of an end- of-packet signal, the USB module sets the EOPF bit and will generate a CPU interrupt if the EOPIE bit in the UIR1 register is set. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Monitor ROM (MON) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 10. Monitor ROM (MON)

10.1 Contents

10.2 Introduction

This section describes the monitor ROM. The monitor ROM allows complete testing of the MCU through a single-wire interface with a host computer. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Monitor ROM (MON) General Release Specification MC68HC08KL8 — Rev. 2.0 Monitor ROM (MON)

10.3 Features

Features of the monitor ROM include:

• Normal User-Mode Pin Functionality
• One Pin Dedicated to Serial Communication between Monitor ROM and Host Computer
• Standard Mark/Space Non-Return-to-Zero (NRZ) Communication with Host Computer
• Execution of Code in RAM or ROM
• ROM Security

10.4 Functional Description

The monitor ROM receives and executes commands from a host computer.Figure 10-1shows an example circuit used to enter monitor mode and communicate with a host computer via a standard RS-232 interface. Simple monitor commands can access any memory address. In monitor mode, the MCU can execute host-computer code in RAM while all MCU pins retain normal operating mode functions. All communication between the host computer and the MCU is through the PTA0 pin. A level-shifting and multiplexing interface is required between PTA0 and the host computer. PTA0 is used in a wired-OR configuration and requires a pullup resistor. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Monitor ROM (MON) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Monitor ROM (MON) NON-DISCLOSURE AGREEMENT REQUIRED Figure 10-1. Monitor Mode Circuit

10 MΩX1

VDD1, VDD2 PTA0 VDD 10 kΩ 0.1 µF 10 Ω DB-25 VDD VDD VDD 20 pF 20 pF 10 µF 10 µF10 µF 10 µF 0.1 µF

4.9152 MHz

10 kΩ PTC3VDD 10 kΩ B A NOTES : Position B — Bus clock = CGMXCLK÷ 2 (See NOTES) VSS1 PTC0 PTC1 VDD 10 kΩ VDDREG 0.1 µF VDD Position A — Bus clock = CGMXCLK÷ 4 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Monitor ROM (MON) General Release Specification MC68HC08KL8 — Rev. 2.0 Monitor ROM (MON)

10.4.1 Entering Monitor Mode

Table 10-1 shows the pin conditions for entering monitor mode. If PTC3 is low upon monitor mode entry, CGMOUT is equal to the crystal frequency. The bus frequency in this case is a divide-by-two of the input clock. If PTC3 is high upon monitor mode entry, the bus frequency will be a divide-by-four of the input clock. NOTE: Holding the PTC3 pin low when entering monitor mode causes a bypass of a divide-by-two stage at the oscillator. The CGMOUT frequency is equal to the CGMXCLK frequency, and the OSC1 input directly generates internal bus clocks. In this case, the OSC1 signal must have a 50% duty cycle at maximum bus frequency. Enter monitor mode with the pin configuration shown above by pulling RST low and then high. The rising edge ofRST latches monitor mode. Once monitor mode is latched, the values on the specified pins can change. NOTE: The PTA7 pin must remain at logic 0 for 24 bus cycles after theRST pin goes high. Once out of reset, the MCU waits for the host to send eight security bytes. (See10.5 Security.) After the security bytes, the MCU sends a break signal (10 consecutive logic 0s) to the host, indicating that it is ready to receive a command. Table 10-1. Monitor Mode Entry IRQ1 Pin PTA7 Pin PTC0 Pin PTC1 Pin PTA0 Pin PTC3 Pin CGMOUT Bus Frequency VTST 0101

0 CGMXCLK

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Monitor ROM (MON) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Monitor ROM (MON) NON-DISCLOSURE AGREEMENT REQUIRED In monitor mode, the MCU uses different vectors for reset, SWI, and break interrupt than those for user mode. The alternate vectors are in the $FE page instead of the $FF page and allow code execution from the internal monitor firmware instead of user code. The COP module is disabled in monitor mode as long as VTST is applied to either theIRQ pin or theRST pin. Table 10-2summarizes the differences between user mode and monitor mode. Table 10-2. Mode Differences Modes Functions COP Reset Vector High Reset Vector Low Break Vector High Break Vector Low SWI Vector High SWI Vector Low User Enabled $FFFE $FFFF $FFFC $FFFD $FFFC $FFFD Monitor Disabled(1) 1. If the high voltage (VTST ) is removed from theIRQ1 pin or theRST pin, the SIM asserts its COP enable output. The COP is a mask option enabled or disabled by the COPD bit in the mask option register. $FEFE $FEFF $FEFC $FEFD $FEFC $FEFD Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Monitor ROM (MON) General Release Specification MC68HC08KL8 — Rev. 2.0 Monitor ROM (MON)

10.4.2 Data Format

Communication with the monitor ROM is in standard non-return-to-zero (NRZ) mark/space data format. Transmit and receive baud rates must be identical. Figure 10-2. Monitor Data Format

10.4.3 Break Signal

A start bit (logic 0) followed by nine logic 0 bits is a break signal. When the monitor receives a break signal, it drives the PTA0 pin high for the duration of two bits and then echoes back the break signal. Figure 10-3. Break Transaction BIT 5 START BIT BIT 1 NEXT STOP BIT START BITBIT 2 BIT 3 BIT 4 BIT 7BIT 0 BIT 6 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 MISSING STOP BIT 2-STOP BIT DELAY BEFORE ZERO ECHO Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Monitor ROM (MON) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Monitor ROM (MON) NON-DISCLOSURE AGREEMENT REQUIRED

10.4.4 Baud Rate

The communication baud rate is controlled by the crystal frequency and the state of the PTC3 pin upon entry into monitor mode. When PTC3 is high, the divide by ratio is 1024. If the PTC3 pin is at logic 0 upon entry into monitor mode, the divide by ratio is 512.Table 10-3 lists crystal frequencies required to achieve standard baud rates. Other standard baud rates can be accomplished using higher crystal frequencies.

10.4.5 Commands

The monitor ROM firmware uses these commands:

• READ (read memory)
• WRITE (write memory)
• IREAD (indexed read)
• IWRITE (indexed write)
• READSP (read stack pointer)
• RUN (run user program) The monitor ROM firmware echoes each received byte back to the PTA0 pin for error checking. An 11-bit delay at the end of each command allows the host to send a break character to cancel the command. A delay of two bit times occurs before each echo and before READ, IREAD, or READSP data is returned. The data returned by a read command appears after the echo of the last byte of the command. NOTE: Wait one bit time after each echo before sending the next byte. Table 10-3. Monitor Baud Rate Selection Crystal Frequency (MHz) PTC3 Pin Baud Rate 4.9152 0 9600 4.9152 1 4800 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Monitor ROM (MON) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Monitor ROM (MON) NON-DISCLOSURE AGREEMENT REQUIRED A brief description of each monitor mode command is shown inTable 10-4,Table 10-5,Table 10-6, andTable 10-7. Table 10-4. READ (Read Memory) Command Description Read Byte from Memory Operand 2-Byte Address in High Byte:Low Byte Order Data Returned Returns Contents of Specified Address Opcode $4A Command Sequence Table 10-5. WRITE (Write Memory) Command Description Write Byte to Memory Operand 2-Byte Address in High Byte:Low Byte Order; Low Byte Followed by Data Byte Data Returned None Opcode $49 Command Sequence READREAD ECHO SENT TO MONITOR ADDRESS HIGH ADDRESS HIGH ADDRESS LOW DATA RETURN ADDRESS LOW WRITEWRITE ECHO FROM HOST ADDRESS HIGH ADDRESS HIGH ADDRESS LOW ADDRESS LOW DATA DATA Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Monitor ROM (MON) General Release Specification MC68HC08KL8 — Rev. 2.0 Monitor ROM (MON) Table 10-6. IREAD (Indexed Read) Command Description Read Next 2 Bytes in Memory from Last Address Accessed Operand 2-Byte Address in High Byte:Low Byte Order Data Returned Returns Contents of Next Two Addresses Opcode $1A Command Sequence Table 10-7. IWRITE (Indexed Write) Command Description Write to Last Address Accessed + 1 Operand Single Data Byte Data Returned None Opcode $19 Command Sequence IREADIREAD ECHO FROM HOST DATA RETURN DATA IWRITEIWRITE ECHO FROM HOST DATA DATA Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Monitor ROM (MON) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Monitor ROM (MON) NON-DISCLOSURE AGREEMENT REQUIRED A sequence of IREAD or IWRITE commands can access a block of memory sequentially over the full 64-Kbyte memory map. Table 10-8. READSP (Read Stack Pointer) Command Description Reads Stack Pointer Operand None Data Returned Returns Incremented Stack Pointer Value (SP + 1) in High Byte:Low Byte Order Opcode $0C Command Sequence Table 10-9. RUN (Run User Program) Command Description Executes PULH and RTI Instructions Operand None Data Returned None Opcode $28 Command Sequence READSPREADSP ECHO FROM HOST SP RETURN SP HIGH LOW RUNRUN ECHO FROM HOST Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Monitor ROM (MON) General Release Specification MC68HC08KL8 — Rev. 2.0 Monitor ROM (MON) The MCU executes the SWI and PSHH instructions when it enters monitor mode. The RUN command tells the MCU to execute the PULH and RTI instructions. Before sending the RUN command, the host can modify the stacked CPU registers to prepare to run the host program. The READSP command returns the incremented stack pointer value, SP + 1. The high and low bytes of the program counter are at addresses SP + 5 and SP + 6. Figure 10-6. Stack Pointer at Monitor Mode Entry CONDITION CODE REGISTER ACCUMULATOR LOW BYTE OF INDEX REGISTER HIGH BYTE OF PROGRAM COUNTER LOW BYTE OF PROGRAM COUNTER SP + 1 SP + 2 SP + 3 SP + 4 SP + 5 SP SP + 6 HIGH BYTE OF INDEX REGISTER SP + 7 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Monitor ROM (MON) Security MC68HC08KL8 — Rev. 2.0 General Release Specification Monitor ROM (MON) NON-DISCLOSURE AGREEMENT REQUIRED

10.5 Security

A security feature1 discourages unauthorized reading of ROM locations while in monitor mode. The host can bypass the security feature at monitor mode entry by sending eight security bytes that match the bytes at locations $FFF6–$FFFD. Locations $FFF6–$FFFD contain user- defined data. NOTE: Do not leave locations $FFF6–$FFFD blank. For security reasons, program locations $FFF6–$FFFD even if they are not used for vectors. During monitor mode entry, the MCU waits after the power-on reset for the host to send the eight security bytes on pin PA0. Figure 10-7. Monitor Mode Entry Timing 1. No security feature is absolutely secure. However, Motorola’s strategy is to make reading or copying the ROM data difficult for unauthorized users. BYTE 1 BYTE 1 ECHO BYTE 2 BYTE 2 ECHO BYTE 8 BYTE 8 ECHO COMMAND COMMAND ECHO PA0 PA7 RST VDD 4096 + 32 CGMXCLK CYCLES

24 BUS CYCLES

256 BUS CYCLES (MINIMUM)

NOTES: 2 = Data return delay, 2 bit times 4 = Wait 1 bit time before sending next byte FROM HOST FROM MCU 1 = Echo delay, 2 bit times Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Monitor ROM (MON) General Release Specification MC68HC08KL8 — Rev. 2.0 Monitor ROM (MON) If the received bytes match those at locations $FFF6–$FFFD, the host bypasses the security feature and can read all ROM locations and execute code from ROM. Security remains bypassed until a power-on reset occurs. After the host bypasses security, any reset other than a power-on reset requires the host to send another eight bytes. If the reset was not a power-on reset, security remains bypassed regardless of the data that the host sends. If the received bytes do not match the data at locations $FFF6–$FFFD, the host fails to bypass the security feature. The MCU remains in monitor mode, but reading ROM locations returns undefined data, and trying to execute code from ROM causes an illegal address reset. After the host fails to bypass security, any reset other than a power-on reset causes an endless loop of illegal address resets. After receiving the eight security bytes from the host, the MCU transmits a break character signalling that it is ready to receive a command. NOTE: The MCU does not transmit a break character until after the host sends the eight security bytes. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 11. Timer Interface Module (TIM)

11.1 Contents

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM)

11.2 Introduction

This section describes the timer interface module (TIM2, Version B). The TIM is a 2-channel timer that provides a timing reference with input capture, output compare, and pulse-width-modulation functions. Figure 11-1 is a block diagram of the TIM. NOTE: The TIM module is available only on the 52-pin QFP package.

11.3 Features

Features of the TIM include:

• Two Input Capture/Output Compare Channels – Rising-Edge, Falling-Edge, or Any-Edge Input Capture Trigger – Set, Clear, or Toggle Output Compare Action
• Buffered and Unbuffered Pulse Width Modulation (PWM) Signal Generation
• Programmable TIM Clock Input – 7-Frequency Internal Bus Clock Prescaler Selection – External TIM Clock Input (Bus Frequency÷2 Maximum)
• Free-Running or Modulo Up-Count Operation
• Toggle Any Channel Pin on Overflow
• TIM Counter Stop and Reset Bits
• Modular Architecture Expandable to Eight Channels

11.4 Functional Description

Figure 11-1 shows the structure of the TIM. The central component of the TIM is the 16-bit TIM counter that can operate as a free-running counter or a modulo up-counter. The TIM counter provides the timing reference for the input capture and output compare functions. The TIM counter modulo registers, TMODH:TMODL, control the modulo value of the TIM counter. Software can read the TIM counter value at any time without affecting the counting sequence. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED The two TIM channels are programmable independently as input capture or output compare channels. Figure 11-1. TIM Block Diagram PRESCALER PRESCALER SELECT TCLK INTERNAL 16-BIT COMPARATOR PS2 PS1 PS0 16-BIT COMPARATOR 16-BIT LATCH TCH0H:TCH0L MS0A ELS0B ELS0A PTE1 TOF TOIE INTER- 16-BIT COMPARATOR 16-BIT LATCH TCH1H:TCH1L CHANNEL 0 CHANNEL 1 TMODH:TMODL TRST TSTOP TOV0 CH0IE CH0F ELS1B ELS1A TOV1 CH1IE CH1MAX CH1F CH0MAX MS0B 16-BIT COUNTER INTERNAL BUS BUS CLOCK MS1A PTE0/TCLK PTE1/TCH0 PTE2/TCH1 LOGIC RUPT LOGIC INTER- RUPT LOGIC PTE2 LOGIC INTER- RUPT LOGIC Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM) Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 $0010 TIM Status and Control Register (TSC) Read: TOF TOIE TSTOP PS2 PS1 PS0 Write: 0 TRST Reset: 0 0 1 0 0 0 0 0 $0012 TIM Counter Register High (TCNTH) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: 0 0 0 0 0 0 0 0 $0013 TIM Counter Register Low (TCNTL) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: 0 0 0 0 0 0 0 0 $0014 TIM Counter Modulo Register High (TMODH) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: 1 1 1 1 1 1 1 1 $0015 TIM Counter Modulo Register Low (TMODL) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: 1 1 1 1 1 1 1 1 $0016 TIM Channel 0 Status and Control Register (TSC0) Read: CH0F CH0IE MS0B MS0A ELS0B ELS0A TOV0 CH0MAX Write: 0 Reset: 0 0 0 0 0 0 0 0 $0017 TIM Channel 0 Register High (TCH0H) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: Indeterminate after Reset $0018 TIM Channel 0 Register Low (TCH0L) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: Indeterminate after Reset = Unimplemented Figure 11-2. TIM I/O Register Summary Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED $0019 TIM Channel 1 Status and Control Register (TSC1) Read: CH1F CH1IE MS1A ELS1B ELS1A TOV1 CH1MAX Write: 0 Reset: 0 0 0 0 0 0 0 0 $001A TIM Channel 1 Register High (TCH1H) Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: Indeterminate after Reset $001B TIM Channel 1 Register Low (TCH1L) Read: Bit 7 6 5 4 3 2 1 Bit 0 Write: Reset: Indeterminate after Reset Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 = Unimplemented Figure 11-2. TIM I/O Register Summary Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM)

11.4.1 TIM Counter Prescaler

The TIM clock source can be one of the seven prescaler outputs or the TIM clock pin, PTE0/TCLK. The prescaler generates seven clock rates from the internal bus clock. The prescaler select bits, PS[2:0], in the TIM status and control register (TSC) select the TIM clock source.

11.4.2 Input Capture

With the input capture function, the TIM can capture the time at which an external event occurs. When an active edge occurs on the pin of an input capture channel, the TIM latches the contents of the TIM counter into the TIM channel registers, TCHxH:TCHxL. The polarity of the active edge is programmable. Input captures can generate TIM CPU interrupt requests.

11.4.3 Output Compare

With the output compare function, the TIM can generate a periodic pulse with a programmable polarity, duration, and frequency. When the counter reaches the value in the registers of an output compare channel, the TIM can set, clear, or toggle the channel pin. Output compares can generate TIM CPU interrupt requests.

11.4.3.1 Unbuffered Output Compare

Any output compare channel can generate unbuffered output compare pulses as described in11.4.3 Output Compare. The pulses are unbuffered because changing the output compare value requires writing the new value over the old value currently in the TIM channel registers. An unsynchronized write to the TIM channel registers to change an output compare value could cause incorrect operation for up to two counter overflow periods. For example, writing a new value before the counter reaches the old value but after the counter reaches the new value prevents any compare during that counter overflow period. Also, using a TIM overflow interrupt routine to write a new, smaller output Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED compare value may cause the compare to be missed. The TIM may pass the new value before it is written. Use the following methods to synchronize unbuffered changes in the output compare value on channel x:

• When changing to a smaller value, enable channel x output compare interrupts and write the new value in the output compare interrupt routine. The output compare interrupt occurs at the end of the current output compare pulse. The interrupt routine has until the end of the counter overflow period to write the new value.
• When changing to a larger output compare value, enable channel x TIM overflow interrupts and write the new value in the TIM overflow interrupt routine. The TIM overflow interrupt occurs at the end of the current counter overflow period. Writing a larger value in an output compare interrupt routine (at the end of the current pulse) could cause two output compares to occur in the same counter overflow period.

11.4.3.2 Buffered Output Compare

Channels 0 and 1 can be linked to form a buffered output compare channel whose output appears on the PTE1/TCH0 pin. The TIM channel registers of the linked pair alternately control the output. Setting the MS0B bit in TIM channel 0 status and control register (TSC0) links channel 0 and channel 1. The output compare value in the TIM channel 0 registers initially controls the output on the PTE1/TCH0 pin. Writing to the TIM channel 1 registers enables the TIM channel 1 registers to synchronously control the output after the TIM overflows. At each subsequent overflow, the TIM channel registers (0 or 1) that control the output are the ones written to last. TSC0 controls and monitors the buffered output compare function, and TIM channel 1 status and control register (TSC1) is unused. While the MS0B bit is set, the channel 1 pin, PTE2/TCH1, is available as a general-purpose I/O pin. NOTE: In buffered output compare operation, do not write new output compare values to the currently active channel registers. Writing to the active channel registers is the same as generating unbuffered output compares. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM)

11.4.4 Pulse Width Modulation (PWM)

By using the toggle-on-overflow feature with an output compare channel, the TIM can generate a PWM signal. The value in the TIM counter modulo registers determines the period of the PWM signal. The channel pin toggles when the counter reaches the value in the TIM counter modulo registers. The time between overflows is the period of the PWM signal. As Figure 11-3 shows, the output compare value in the TIM channel registers determines the pulse width of the PWM signal. The time between overflow and output compare is the pulse width. Program the TIM to clear the channel pin on output compare if the state of the PWM pulse is logic 1. Program the TIM to set the pin if the state of the PWM pulse is logic 0. Figure 11-3. PWM Period and Pulse Width The value in the TIM counter modulo registers and the selected prescaler output determines the frequency of the PWM output. The frequency of an 8-bit PWM signal is variable in 256 increments. Writing $00FF (255) to the TIM counter modulo registers produces a PWM period of 256 times the internal bus clock period if the prescaler select value is 000 (see11.9.1 TIM Status and Control Register). The value in the TIM channel registers determines the pulse width of the PWM output. The pulse width of an 8-bit PWM signal is variable in 256 PTEx/TCHxA PERIOD PULSE WIDTH OVERFLOW OVERFLOW OVERFLOW OUTPUT COMPARE OUTPUT COMPARE OUTPUT COMPARE Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED increments. Writing $0080 (128) to the TIM channel registers produces a duty cycle of 128/256 or 50%.

11.4.4.1 Unbuffered PWM Signal Generation

Any output compare channel can generate unbuffered PWM pulses as described in11.4.4 Pulse Width Modulation (PWM). The pulses are unbuffered because changing the pulse width requires writing the new pulse width value over the old value currently in the TIM channel registers. An unsynchronized write to the TIM channel registers to change a pulse width value could cause incorrect operation for up to two PWM periods. For example, writing a new value before the counter reaches the old value but after the counter reaches the new value prevents any compare during that PWM period. Also, using a TIM overflow interrupt routine to write a new, smaller pulse width value may cause the compare to be missed. The TIM may pass the new value before it is written. Use the following methods to synchronize unbuffered changes in the PWM pulse width on channel x:

• When changing to a shorter pulse width, enable channel x output compare interrupts and write the new value in the output compare interrupt routine. The output compare interrupt occurs at the end of the current pulse. The interrupt routine has until the end of the PWM period to write the new value.
• When changing to a longer pulse width, enable channel x TIM overflow interrupts and write the new value in the TIM overflow interrupt routine. The TIM overflow interrupt occurs at the end of the current PWM period. Writing a larger value in an output compare interrupt routine (at the end of the current pulse) could cause two output compares to occur in the same PWM period. NOTE: In PWM signal generation, do not program the PWM channel to toggle on output compare. Toggling on output compare prevents reliable 0% duty cycle generation and removes the ability of the channel to self- correct in the event of software error or noise. Toggling on output Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM) compare also can cause incorrect PWM signal generation when changing the PWM pulse width to a new, much larger value.

11.4.4.2 Buffered PWM Signal Generation

Channels 0 and 1 can be linked to form a buffered PWM channel whose output appears on the PTE1/TCH0 pin. The TIM channel registers of the linked pair alternately control the pulse width of the output. Setting the MS0B bit in TIM channel 0 status and control register (TSC0) links channel 0 and channel 1. The TIM channel 0 registers initially control the pulse width on the PTE1/TCH0 pin. Writing to the TIM channel 1 registers enables the TIM channel 1 registers to synchronously control the pulse width at the beginning of the next PWM period. At each subsequent overflow, the TIM channel registers (0 or 1) that control the pulse width are the ones written to last. TSC0 controls and monitors the buffered PWM function, and TIM channel 1 status and control register (TSC1) is unused. While the MS0B bit is set, the channel 1 pin, PTE2/TCH1, is available as a general-purpose I/O pin. NOTE: In buffered PWM signal generation, do not write new pulse width values to the currently active channel registers. Writing to the active channel registers is the same as generating unbuffered PWM signals.

11.4.4.3 PWM Initialization

To ensure correct operation when generating unbuffered or buffered PWM signals, use this initialization procedure: 1. In the TIM status and control register (TSC): a. Stop the TIM counter by setting the TIM stop bit, TSTOP. b. Reset the TIM counter by setting the TIM reset bit, TRST. 2. In the TIM counter modulo registers (TMODH:TMODL), write the value for the required PWM period. 3. In the TIM channel x registers (TCHxH:TCHxL), write the value for the required pulse width. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED 4. In TIM channel x status and control register (TSCx): a. Write 0:1 (for unbuffered output compare or PWM signals) or 1:0 (for buffered output compare or PWM signals) to the mode select bits, MSxB:MSxA. (SeeTable 11-2.) b. Write 1 to the toggle-on-overflow bit, TOVx. c. Write 1:0 (to clear output on compare) or 1:1 (to set output on compare) to the edge/level select bits, ELSxB:ELSxA. The output action on compare must force the output to the complement of the pulse width level. (SeeTable 11-2.) NOTE: In PWM signal generation, do not program the PWM channel to toggle on output compare. Toggling on output compare prevents reliable 0% duty cycle generation and removes the ability of the channel to self- correct in the event of software error or noise. Toggling on output compare can also cause incorrect PWM signal generation when changing the PWM pulse width to a new, much larger value. 5. In the TIM status control register (TSC), clear the TIM stop bit, TSTOP. Setting MS0B links channels 0 and 1 and configures them for buffered PWM operation. The TIM channel 0 registers (TCH0H:TCH0L) initially control the buffered PWM output. TIM status control register 0 (TSCR0) controls and monitors the PWM signal from the linked channels. MS0B takes priority over MS0A. Clearing the toggle-on-overflow bit, TOVx, inhibits output toggles on TIM overflows. Subsequent output compares try to force the output to a state it is already in and have no effect. The result is a 0% duty cycle output. Setting the channel x maximum duty cycle bit (CHxMAX) and clearing the TOVx bit generates a 100% duty cycle output. (See11.9.4 TIM Channel Status and Control Registers.) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM)

11.5 Interrupts

The following TIM sources can generate interrupt requests:

• TIM overflow flag (TOF) — The TOF bit is set when the TIM counter value rolls over to $0000 after matching the value in the TIM counter modulo registers. The TIM overflow interrupt enable bit, TOIE, enables TIM overflow CPU interrupt requests. TOF and TOIE are in the TIM status and control register.
• TIM channel flags (CH1F:CH0F) — The CHxF bit is set when an input capture or output compare occurs on channel x. Channel x TIM CPU interrupt requests are controlled by the channel x interrupt enable bit, CHxIE. Channel x TIM CPU interrupt requests are enabled when CHxIE = 1. CHxF and CHxIE are in the TIM channel x status and control register.

11.6 Wait Mode

The WAIT instruction puts the MCU in low-power standby mode. The TIM remains active after the execution of a WAIT instruction. In wait mode the TIM registers are not accessible by the CPU. Any enabled CPU interrupt request from the TIM can bring the MCU out of wait mode. If TIM functions are not required during wait mode, reduce power consumption by stopping the TIM before executing the WAIT instruction. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) TIM During Break Interrupts MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED

11.7 TIM During Break Interrupts

A break interrupt stops the TIM counter. The system integration module (SIM) controls whether status bits in other modules can be cleared during the break state. The BCFE bit in the break flag control register (BFCR) enables software to clear status bits during the break state. (See8.8.3 Break Flag Control Register.) To allow software to clear status bits during a break interrupt, write a logic 1 to the BCFE bit. If a status bit is cleared during the break state, it remains cleared when the MCU exits the break state. To protect status bits during the break state, write a logic 0 to the BCFE bit. With BCFE at logic 0 (its default state), software can read and write I/O registers during the break state without affecting status bits. Some status bits have a 2-step read/write clearing procedure. If software does the first step on such a bit before the break, the bit cannot change during the break state as long as BCFE is at logic 0. After the break, doing the second step clears the status bit.

11.8 I/O Signals

Port E shares three of its pins with the TIM. PTE0/TCLK is an external clock input to the TIM prescaler. The two TIM channel I/O pins are PTE1/TCH0 and PTE2/TCH1. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM)

11.8.1 TIM Clock Pin (PTE0/TCLK)

PTE0/TCLK is an external clock input that can be the clock source for the TIM counter instead of the prescaled internal bus clock. Select the PTE0/TCLK input by writing logic 1s to the three prescaler select bits, PS[2:0]. (See11.9.1 TIM Status and Control Register.) The minimum TCLK pulse width, TCLKLMIN or TCLKHMIN , is: The maximum TCLK frequency is: bus frequency÷ 2 PTE0/TCLK is available as a general-purpose I/O pin when not used as the TIM clock input. When the PTE0/TCLK pin is the TIM clock input, it is an input regardless of the state of the DDRE0 bit in data direction register E.

11.8.2 TIM Channel I/O Pins (PTE1/TCH0:PTE2/TCH1)

Each channel I/O pin is programmable independently as an input capture pin or an output compare pin.PTE1/TCH0 can be configured as buffered output compare or buffered PWM pins.

11.9 I/O Registers

These I/O registers control and monitor TIM operation:

• TIM status and control register (TSC)
• TIM control registers (TCNTH:TCNTL)
• TIM counter modulo registers (TMODH:TMODL)
• TIM channel status and control registers (TSC0 and TSC1)
• TIM channel registers (TCH0H:TCH0L and TCH1H:TCH1L) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) I/O Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED

11.9.1 TIM Status and Control Register

The TIM status and control register:

• Enables TIM overflow interrupts
• Flags TIM overflows
• Stops the TIM counter
• Resets the TIM counter
• Prescales the TIM counter clock TOF — TIM Overflow Flag Bit This read/write flag is set when the TIM counter resets to $0000 after reaching the modulo value programmed in the TIM counter modulo registers. Clear TOF by reading the TIM status and control register when TOF is set and then writing a logic 0 to TOF. If another TIM overflow occurs before the clearing sequence is complete, then writing logic 0 to TOF has no effect. Therefore, a TOF interrupt request cannot be lost due to inadvertent clearing of TOF. Reset clears the TOF bit. Writing a logic 1 to TOF has no effect. 1 = TIM counter has reached modulo value. 0 = TIM counter has not reached modulo value. TOIE — TIM Overflow Interrupt Enable Bit This read/write bit enables TIM overflow interrupts when the TOF bit becomes set. Reset clears the TOIE bit. 1 = TIM overflow interrupts enabled 0 = TIM overflow interrupts disabled Address: $0010 Bit 7 654321 Bit 0 Read: TOF TOIE TSTOP PS2 PS1 PS0 Write: 0 TRST Reset: 00100000 = Unimplemented Figure 11-4. TIM Status and Control Register (TSC) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM) TSTOP — TIM Stop Bit This read/write bit stops the TIM counter. Counting resumes when TSTOP is cleared. Reset sets the TSTOP bit, stopping the TIM counter until software clears the TSTOP bit. 1 = TIM counter stopped 0 = TIM counter active NOTE: Do not set the TSTOP bit before entering wait mode if the TIM is required to exit wait mode. TRST — TIM Reset Bit Setting this write-only bit resets the TIM counter and the TIM prescaler. Setting TRST has no effect on any other registers. Counting resumes from $0000. TRST is cleared automatically after the TIM counter is reset and always reads as logic 0. Reset clears the TRST bit. 1 = Prescaler and TIM counter cleared 0 = No effect NOTE: Setting the TSTOP and TRST bits simultaneously stops the TIM counter at a value of $0000. PS[2:0] — Prescaler Select Bits These read/write bits select either the PTE0/TCLK pin or one of the seven prescaler outputs as the input to the TIM counter as Table 11-1 shows. Reset clears the PS[2:0] bits. Table 11-1. Prescaler Selection PS[2:0] TIM Clock Source

000 Internal Bus Clock ÷1

001 Internal Bus Clock ÷ 2

010 Internal Bus Clock ÷ 4

011 Internal Bus Clock ÷ 8

100 Internal Bus Clock ÷ 16

101 Internal Bus Clock ÷ 32

110 Internal Bus Clock ÷ 64

111 PTE0/TCLK

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) I/O Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED

11.9.2 TIM Counter Registers

The two read-only TIM counter registers contain the high and low bytes of the value in the TIM counter. Reading the high byte (TCNTH) latches the contents of the low byte (TCNTL) into a buffer. Subsequent reads of TCNTH do not affect the latched TCNTL value until TCNTL is read. Reset clears the TIM counter registers. Setting the TIM reset bit (TRST) also clears the TIM counter registers. NOTE: If you read TCNTH during a break interrupt, be sure to unlatch TCNTL by reading TCNTL before exiting the break interrupt. Otherwise, TCNTL retains the value latched during the break. TCNTH Address: $0012 Bit 7 654321 Bit 0 Read: Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Write: Reset: 00000000 TCNTL Address: $0013 Bit 7 654321 Bit 0 Read: Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Write: Reset: 00000000 = Unimplemented Figure 11-5. TIM Counter Registers (TCNTH:TCNTL) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM)

11.9.3 TIM Counter Modulo Registers

The read/write TIM modulo registers contain the modulo value for the TIM counter. When the TIM counter reaches the modulo value, the overflow flag (TOF) becomes set, and the TIM counter resumes counting from $0000 at the next clock. Writing to the high byte (TMODH) inhibits the TOF bit and overflow interrupts until the low byte (TMODL) is written. Reset sets the TIM counter modulo registers. NOTE: Reset the TIM counter before writing to the TIM counter modulo registers. TMODH Address: $0014 Bit 7 654321 Bit 0 Read: Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Write: Reset: 11111111 TMODL Address: $0015 Bit 7 654321 Bit 0 Read: Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Write: Reset: 11111111 Figure 11-6. TIM Counter Modulo Registers (TMODH:TMODL) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) I/O Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED

11.9.4 TIM Channel Status and Control Registers

Each of the TIM channel status and control registers:

• Flags input captures and output compares
• Enables input capture and output compare interrupts
• Selects input capture, output compare, or PWM operation
• Selects high, low, or toggling output on output compare
• Selects rising edge, falling edge, or any edge as the active input capture trigger
• Selects output toggling on TIM overflow
• Selects 100% PWM duty cycle
• Selects buffered or unbuffered output compare/PWM operation TSC0 Address: $0016 Bit 7 654321 Bit 0 Read: CH0F CH0IE MS0B MS0A ELS0B ELS0A TOV0 CH0MAX Write: 0 Reset: 00000000 TSC1 Address: $0019 Bit 7 654321 Bit 0 Read: CH1F CH1IE MS1A ELS1B ELS1A TOV1 CH1MAX Write: 0 Reset: 00000000 = Unimplemented Figure 11-7. TIM Channel Status and Control Registers (TSC0:TSC1) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM) CHxF — Channel x Flag Bit When channel x is an input capture channel, this read/write bit is set when an active edge occurs on the channel x pin. When channel x is an output compare channel, CHxF is set when the value in the TIM counter registers matches the value in the TIM channel x registers. When TIM CPU interrupt requests are enabled (CHxIE = 1), clear CHxF by reading the TIM channel x status and control register with CHxF set and then writing a logic 0 to CHxF. If another interrupt request occurs before the clearing sequence is complete, then writing logic 0 to CHxF has no effect. Therefore, an interrupt request cannot be lost due to inadvertent clearing of CHxF. Reset clears the CHxF bit. Writing a logic 1 to CHxF has no effect. 1 = Input capture or output compare on channel x 0 = No input capture or output compare on channel x CHxIE — Channel x Interrupt Enable Bit This read/write bit enables TIM CPU interrupt service requests on channel x. Reset clears the CHxIE bit. 1 = Channel x CPU interrupt requests enabled 0 = Channel x CPU interrupt requests disabled MSxB — Mode Select Bit B This read/write bit selects buffered output compare/PWM operation. MSxB exists only in the TIM channel 0 status and control register. Setting MS0B disables the channel 1 status and control register and reverts TCH1 to general-purpose I/O. Reset clears the MSxB bit. 1 = Buffered output compare/PWM operation enabled 0 = Buffered output compare/PWM operation disabled MSxA — Mode Select Bit A When ELSxB:A ≠ 00, this read/write bit selects either input capture operation or unbuffered output compare/PWM operation. See Table 11-2. 1 = Unbuffered output compare/PWM operation 0 = Input capture operation Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) I/O Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED When ELSxB:A = 00, this read/write bit selects the initial output level of the TCHx pin. (SeeTable 11-2.). Reset clears the MSxA bit. 1 = Initial output level low 0 = Initial output level high NOTE: Before changing a channel function by writing to the MSxB or MSxA bit, set the TSTOP and TRST bits in the TIM status and control register (TSC). ELSxB and ELSxA — Edge/Level Select Bits When channel x is an input capture channel, these read/write bits control the active edge-sensing logic on channel x. When channel x is an output compare channel, ELSxB and ELSxA control the channel x output behavior when an output compare occurs. When ELSxB and ELSxA are both clear, channel x is not connected to port E, and pin PTEx/TCHx is available as a general-purpose I/O pin.Table 11-2shows how ELSxB and ELSxA work. Reset clears the ELSxB and ELSxA bits. Table 11-2. Mode, Edge, and Level Selection MSxB:MSxA ELSxB:ELSxA Mode Configuration X0 00 Output Preset Pin under Port Control; Initial Output Level High X1 00 Pin under Port Control; Initial Output Level Low 00 01 Input Capture Capture on Rising Edge Only 00 10 Capture on Falling Edge Only 00 11 Capture on Rising or Falling Edge 01 01 Output Compare or PWM Toggle Output on Compare 01 10 Clear Output on Compare 01 11 Set Output on Compare 1X 01 Buffered Output Compare or Buffered PWM Toggle Output on Compare 1X 10 Clear Output on Compare 1X 11 Set Output on Compare Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module (TIM) I/O Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Timer Interface Module (TIM) NON-DISCLOSURE AGREEMENT REQUIRED

11.9.5 TIM Channel Registers

These read/write registers contain the captured TIM counter value of the input capture function or the output compare value of the output compare function. The state of the TIM channel registers after reset is unknown. In input capture mode (MSxB:MSxA = 0:0), reading the high byte of the TIM channel x registers (TCHxH) inhibits input captures until the low byte (TCHxL) is read. In output compare mode (MSxB:MSxA≠ 0:0), writing to the high byte of the TIM channel x registers (TCHxH) inhibits output compares until the low byte (TCHxL) is written. TCH0H Address: $0017 Bit 7 654321 Bit 0 Read: Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Write: Reset: Indeterminate after Reset TCH0L Address: $0018 Bit 7 654321 Bit 0 Read: Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Write: Reset: Indeterminate after Reset TCH1H Address: $001A Bit 7 654321 Bit 0 Read: Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Write: Reset: Indeterminate after Reset TCH1L Address: $001B Bit 7 654321 Bit 0 Read: Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Write: Reset: Indeterminate after Reset Figure 11-9. TIM Channel Registers (TCH0H/L:TCH1H/L) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Timer Interface Module (TIM) General Release Specification MC68HC08KL8 — Rev. 2.0 Timer Interface Module (TIM) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 12. Input/Output Ports (I/O)

12.1 Contents

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.2 Introduction

Thirty-nine bidirectional input-output (I/O) pins form five parallel ports. All I/O pins are programmable as inputs or outputs. NOTE: Connect any unused I/O pins to an appropriate logic level, either VDD or VSS . Although the I/O ports do not require termination for proper operation, termination reduces excess current consumption and the possibility of electrostatic damage. Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 $0000 Port A Data Register (PTA) Read: PTA7 PTA6 PTA5 PTA4 PTA3 PTA2 PTA1 PTA0 Write: Reset: Unaffected by Reset $0001 Port B Data Register (PTB) Read: PTB7 PTB6 PTB5 PTB4 PTB3 PTB2 PTB1 PTB0 Write: Reset: Unaffected by Reset $0002 Port C Data Register (PTC) Read: PTC7(1) PTC6(1) PTC5(1) PTC4 PTC3 PTC2 PTC1 PTC0 Write: Reset: Unaffected by Reset $0003 Port D Data Register (PTD) Read: PTD7 PTD6 PTD5 PTD4 PTD3 PTD2 PTD1 PTD0 Write: Reset: Unaffected by Reset $0004 Data Direction Register A (DDRA) Read: DDRA7 DDRA6 DDRA5 DDRA4 DDRA3 DDRA2 DDRA1 DDRA0 Write: Reset: 0 0 0 0 0 0 0 0 $0005 Data Direction Register B (DDRB) Read: DDRB7 DDRB6 DDRB5 DDRB4 DDRB3 DDRB2 DDRB1 DDRB0 Write: Reset: 0 0 0 0 0 0 0 0 Note 1. Only available on 52-pin QFP . = Unimplemented Figure 12-1. I/O Port Register Summary Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Introduction MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED $0006 Data Direction Register C (DDRC) Read: DDRC7(1) DDRC6(1) DDRC5(1) DDRC4 DDRC3 DDRC2 DDRC1 DDRC0 Write: Reset: 0 0 0 0 0 0 0 0 $0007 Data Direction Register D (DDRD) Read: DDRD7 DDRD6 DDRD5 DDRD4 DDRD3 DDRD2 DDRD1 DDRD0 Write: Reset: 0 0 0 0 0 0 0 0 $0008 Port E Data Register(1) (PTE) Read: 0 PTE6 PTE5 PTE4 PTE3 PTE2 PTE1 PTE0 Write: Reset: Unaffected by Reset $000C Data Direction Register E(1) (DDRE) Read: 0 DDRE6 DDRE5 DDRE4 DDRE3 DDRE2 DDRE1 DDRE0 Write: Reset: 0 0 0 0 0 0 0 0 $000F Port Option Control Register (POC) Read: 0 0 LDD PCP PBP PAP Write: Reset: 0 0 1 0 0 0 0 0 Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 Note 1. Only available on 52-pin QFP . = Unimplemented Figure 12-1. I/O Port Register Summary (Continued) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.3 Port A

Port A is an 8-bit general-purpose bidirectional I/O port with software configurable pullups.

12.3.1 Port A Data Register

The port A data register contains a data latch for each of the eight port A pins. PTA[7:0] — Port A Data Bits These read/write bits are software programmable. Data direction of each port A pin is under the control of the corresponding bit in data direction register A. Reset has no effect on port A data. The port A pullup enable bit, PAP, in the port option control register (POC) enables pullups on port A pins if the respective pin is configured as an input. (See12.8 Port Options.) Address: $0000 Bit 7 654321 Bit 0 Read: PTA7 PTA6 PTA5 PTA4 PTA3 PTA2 PTA1 PTA0 Write: Reset: Unaffected by Reset Figure 12-2. Port A Data Register (PTA) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port A MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED

12.3.2 Data Direction Register A

Data direction register A determines whether each port A pin is an input or an output. Writing a logic 1 to a DDRA bit enables the output buffer for the corresponding port A pin; a logic 0 disables the output buffer. DDRA[7:0] — Data Direction Register A Bits These read/write bits control port A data direction. Reset clears DDRA[7:0], configuring all port A pins as inputs. 1 = Corresponding port A pin configured as output 0 = Corresponding port A pin configured as input NOTE: Avoid glitches on port A pins by writing to the port A data register before changing data direction register A bits from 0 to 1. Figure 12-4 shows the port A I/O logic. Figure 12-4. Port A I/O Circuit Address: $0004 Bit 7 6 5 4 3 2 1 Bit 0 Read: DDRA7 DDRA6 DDRA5 DDRA4 DDRA3 DDRA2 DDRA1 DDRA0 Write: Reset: 0 0000000 Figure 12-3. Data Direction Register A (DDRA) READ DDRA ($0004) WRITE DDRA ($0004) RESET WRITE PTA ($0000) READ PTA ($0000) PTAx DDRAx PTAx INTERNAL DATA BUS Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O) When bit DDRAx is a logic 1, reading address $0000 reads the PTAx data latch. When bit DDRAx is a logic 0, reading address $0000 reads the voltage level on the pin. The data latch can always be written, regardless of the state of its data direction bit.Table 12-1 summarizes the operation of the port A pins. Table 12-1. Port A Pin Functions DDRA Bit PTA Bit I/O Pin Mode Accesses to DDRA Accesses to PTA Read/Write Read Write 0X (1) 1. X = don’t care Input, Hi-Z(2) 2. Hi-Z = high impedance DDRA[7:0] Pin PTA[7:0] (3) 3. Writing affects data register, but does not affect input.

1 X Output DDRA[7:0] PTA[7:0] PTA[7:0]

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port B MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED

12.4 Port B

Port B is an 8-bit, general-purpose, bidirectional I/O port with software configurable pullups.

12.4.1 Port B Data Register

The port B data register contains a data latch for each of the eight port B pins. PTB[7:0] — Port B Data Bits These read/write bits are software-programmable. Data direction of each port B pin is under the control of the corresponding bit in data direction register B. Reset has no effect on port B data. The port B pullup enable bit, PBP, in the port option control register (POC) enables pullups on port B pins if the respective pin is configured as an input. (See12.8 Port Options.) Address: $0001 Bit 7 654321 Bit 0 Read: PTB7 PTB6 PTB5 PTB4 PTB3 PTB2 PTB1 PTB0 Write: Reset: Unaffected by Reset Figure 12-5. Port B Data Register (PTB) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.4.2 Data Direction Register B

Data direction register B determines whether each port B pin is an input or an output. Writing a logic 1 to a DDRB bit enables the output buffer for the corresponding port B pin; a logic 0 disables the output buffer. DDRB[7:0] — Data Direction Register B Bits These read/write bits control port B data direction. Reset clears DDRB[7:0], configuring all port B pins as inputs. 1 = Corresponding port B pin configured as output 0 = Corresponding port B pin configured as input NOTE: Avoid glitches on port B pins by writing to the port B data register before changing data direction register B bits from 0 to 1. Figure 12-7 shows the port B I/O logic. Figure 12-7. Port B I/O Circuit Address: $0005 Bit 7 6 5 4 3 2 1 Bit 0 Read: DDRB7 DDRB6 DDRB5 DDRB4 DDRB3 DDRB2 DDRB1 DDRB0 Write: Reset: 00000000 Figure 12-6. Data Direction Register B (DDRB) READ DDRB ($0005) WRITE DDRB ($0005) RESET WRITE PTB ($0001) READ PTB ($0001) PTBx DDRBx PTBx INTERNAL DATA BUS Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port B MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED When bit DDRBx is a logic 1, reading address $0001 reads the PTBx data latch. When bit DDRBx is a logic 0, reading address $0001 reads the voltage level on the pin. The data latch can always be written, regardless of the state of its data direction bit.Table 12-2 summarizes the operation of the port B pins. Table 12-2. Port B Pin Functions DDRB Bit PTB Bit I/O Pin Mode Accesses to DDRB Accesses to PTB Read/Write Read Write 0X (1) 1. X = don’t care Input, Hi-Z(2) 2. Hi-Z = high impedance DDRB[7:0] Pin PTB[7:0] (3) 3. Writing affects data register, but does not affect input.

1 X Output DDRB[7:0] PTB[7:0] PTB[7:0]

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.5 Port C

Port C is an 8-bit, general-purpose, bidirectional I/O port with software configurable pullups and current drive options. NOTE: On the 42-lead SDIP package the PTC7–PTC5 pads are not bonded out. Set these ports to output to avoid floating inputs.

12.5.1 Port C Data Register

The port C data register contains a data latch for each of the eight port C pins. PTC[7:0] — Port C Data Bits These read/write bits are software-programmable. Data direction of each port C pin is under the control of the corresponding bit in data direction register C. Reset has no effect on port C data. The LED direct drive bit, LDD, in the port option control register (POC) controls the drive options for port C. The port C pullup enable bit, PCP, in the port option control register (POC) enables pullups on PTC[7:0] if the respective pin is configured as an input. (See12.8 Port Options.) Address: $0002 Bit 7 654321 Bit 0 Read: PTC7 PTC6 PTC5 PTC4 PTC3 PTC2 PTC1 PTC0 Write: Reset: Unaffected by Reset Figure 12-8. Port C Data Register (PTC) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port C MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED

12.5.2 Data Direction Register C

Data direction register C determines whether each port C pin is an input or an output. Writing a logic 1 to a DDRC bit enables the output buffer for the corresponding port C pin; a logic 0 disables the output buffer. DDRC[7:0] — Data Direction Register C Bits These read/write bits control port C data direction. Reset clears DDRC[7:0], configuring all port C pins as inputs. 1 = Corresponding port C pin configured as output 0 = Corresponding port C pin configured as input NOTE: Avoid glitches on port C pins by writing to the port C data register before changing data direction register C bits from 0 to 1. Figure 12-10 shows the port C I/O logic. Figure 12-10. Port C I/O Circuit Address: $0006 Bit 7 654321 Bit 0 Read: DDRC7 DDRC6 DDRC5 DDRC4 DDRC3 DDRC2 DDRC1 DDRC0 Write: Reset: 00000000 Figure 12-9. Data Direction Register C (DDRC) READ DDRC ($0006) WRITE DDRC ($0006) RESET WRITE PTC ($0002) READ PTC ($0002) PTCx DDRCx PTCx INTERNAL DATA BUS Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O) When bit DDRCx is a logic 1, reading address $0002 reads the PTCx data latch. When bit DDRCx is a logic 0, reading address $0002 reads the voltage level on the pin. The data latch can always be written, regardless of the state of its data direction bit.Table 12-3 summarizes the operation of the port C pins. Table 12-3. Port C Pin Functions DDRC Bit PTC Bit I/O Pin Mode Accesses to DDRC Accesses to PTC Read/Write Read Write 0X (1) 1. X = don’t care Input, Hi-Z(2) 2. Hi-Z = high impedance DDRC[7:0] Pin PTC[7:0] (3) 3. Writing affects data register, but does not affect input.

1 X Output DDRC[7:0] PTC[7:0] PTC[7:0]

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port D MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED

12.6 Port D

Port D is an 8-bit, general-purpose, bidirectional I/O port that shares its pins with the keyboard interrupt module (KBI).

12.6.1 Port D Data Register

The port D data register contains a data latch for each of the eight port D pins. PTD[7:0] — Port D Data Bits These read/write bits are software programmable. Data direction of each port D pin is under control of the corresponding bit in data direction register D. Reset has no effect on port D data. The keyboard interrupt enable bits, KBIE7–KBIE0, in the keyboard interrupt control register (KBICR) enable the port D pins as external interrupt pins. (SeeSection 15. Keyboard Interrupt Module (KBI).) Address: $0003 Bit 7 654321 Bit 0 Read: PTD7 PTD6 PTD5 PTD4 PTD3 PTD2 PTD1 PTD0 Write: Reset: Unaffected by Reset Figure 12-11. Port D Data Register (PTD) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.6.2 Data Direction Register D

Data direction register D determines whether each port D pin is an input or an output. Writing a logic 1 to a DDRD bit enables the output buffer for the corresponding port D pin; a logic 0 disables the output buffer. DDRD[7:0] — Data Direction Register D Bits These read/write bits control port D data direction. Reset clears DDRD[7:0], configuring all port D pins as inputs. 1 = Corresponding port D pin configured as output 0 = Corresponding port D pin configured as input NOTE: Avoid glitches on port D pins by writing to the port D data register before changing data direction register D bits from 0 to 1. Figure 12-13 shows the port D I/O circuit logic. Figure 12-13. Port D I/O Circuit Address: $0007 Bit 7 654321 Bit 0 Read: DDRD7 DDRD6 DDRD5 DDRD4 DDRD3 DDRD2 DDRD1 DDRD0 Write: Reset: 00000000 Figure 12-12. Data Direction Register D (DDRD) READ DDRD ($0007) WRITE DDRD ($0007) RESET WRITE PTD ($0003) READ PTD ($0003) PTDx DDRDx PTDx INTERNAL DATA BUS Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port D MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED When bit DDRDx is a logic 1, reading address $0003 reads the PTDx data latch. When bit DDRDx is a logic 0, reading address $0003 reads the voltage level on the pin. The data latch can always be written, regardless of the state of its data direction bit.Table 12-4 summarizes the operation of the port D pins. Table 12-4. Port D Pin Functions DDRD Bit PTD Bit I/O Pin Mode Accesses to DDRD Accesses to PTD Read/Write Read Write 0X (1) 1. X = don’t care Input, Hi-Z(2) 2. Hi-Z = high impedance DDRD[7:0] Pin PTD[7:0] (3) 3. Writing affects data register, but does not affect input.

1 X Output DDRD[7:0] PTD[7:0] PTD[7:0]

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.7 Port E

Port E is a 7-bit special function port that shares three of its pins with the timer interface module (TIM). NOTE: On the 42-lead SDIP package the port E pads are not bonded out. Set these ports to output to avoid floating inputs.

12.7.1 Port E Data Register

The port E data register contains a data latch for each of the seven port E pins. PTE[6:0] — Port E Data Bits PTE[6:0] are read/write, software-programmable bits. Data direction of each port E pin is under the control of the corresponding bit in data direction register E. TCH1–TCH0 — Timer Channel I/O Bits The PE2/TCH1–PE1/TCH0 pins are the TIM input capture/output compare pins. The edge/level select bits, ELSxB and ELSxA, determine whether the PE2/TCH1–PE1/TCH0 pins are timer channel I/O pins or general-purpose I/O pins. (SeeSection 11. Timer Interface Module (TIM).) Address: $0008 Bit 7 654321 Bit 0 Read: 0 PTE6 PTE5 PTE4 PTE3 PTE2 PTE1 PTE0 Write: Reset: Unaffected by Reset = Unimplemented Alternate Function: TCH1 TCH0 TCLK Figure 12-14. Port E Data Register (PTE) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port E MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED NOTE: Data direction register E (DDRE) does not affect the data direction of port E pins that are being used by the TIM. However, the DDRE bits always determine whether reading port E returns the states of the latches or the states of the pins. TCLK — Timer Clock Input The PE0/TCLK pin is the external clock input for the TIM. The prescaler select bits, PS2–PS0, selects PE0/TCLK as the TIM clock input. When not selected as the TIM clock, PE0/TCLK is available for general- purpose I/O. (SeeSection 11. Timer Interface Module (TIM).) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.7.2 Data Direction Register E

Data direction register E determines whether each port E pin is an input or an output. Writing a logic 1 to a DDRE bit enables the output buffer for the corresponding port E pin; a logic 0 disables the output buffer. DDRE[6:0] — Data Direction Register E Bits These read/write bits control port E data direction. Reset clears DDRE[6:0], configuring all port E pins as inputs. 1 = Corresponding port E pin configured as output 0 = Corresponding port E pin configured as input NOTE: Avoid glitches on port E pins by writing to the port E data register before changing data direction register E bits from 0 to 1. Figure 12-16 shows the port E I/O circuit logic. Figure 12-16. Port E I/O Circuit Address: $000C Bit 7 654321 Bit 0 Read: 0 DDRE6 DDRE5 DDRE4 DDRE3 DDRE2 DDRE1 DDRE0 Write: Reset: 00000000 = Unimplemented Figure 12-15. Data Direction Register E (DDRE) READ DDRE ($000C) WRITE DDRE ($000C) RESET WRITE PTE ($0008) READ PTE ($0008) PTEx DDREx PTEx INTERNAL DATA BUS Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port E MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED When bit DDREx is a logic 1, reading address $0008 reads the PTEx data latch. When bit DDREx is a logic 0, reading address $0008 reads the voltage level on the pin. The data latch can always be written, regardless of the state of its data direction bit.Table 12-5summarizes the operation of the port E pins. Table 12-5. Port E Pin Functions DDRE Bit PTE Bit I/O Pin Mode Accesses to DDRE Accesses to PTE Read/Write Read Write 0X (1) 1. X = don’t care Input, Hi-Z(2) 2. Hi-Z = high impedance DDRE[6:0] Pin PTE[6:0] (3) 3. Writing affects data register, but does not affect input.

1 X Output DDRE[6:0] PTE[6:0] PTE[6:0]

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O)

12.8 Port Options

All pins of port A, port B, and port C have programmable pullup resistors. Port C also has LED drive capability.

12.8.1 Port Option Control Register

The pullup option for each port is controlled by one bit in the port option control register. One bit controls the LED drive configuration on port C. LDD — LED Direct Drive Control This read/write bit controls the output current capability of port C. When set, the port C pins have current limiting ability so that an LED can be connected directly between the port pin and VDD or VSS without the need of a series resistor. 1 = When respective port is configured as an output, make port C become current, limiting 3 mA source/10 mA sink port pins. 0 = Configure port C to become standard I/O port pins. PCP — Port C Pullup Enable This read/write bit controls the pullup option for port C[7:0] if its respective port pin is configured as an input. 1 = Configure port C to have internal pullups. 0 = Disconnect port C internal pullups. Address: $000F Bit 7 654321 Bit 0 Read: 0 0 LDD PCP PBP PAP Write: Reset: 00100000 = Unimplemented Figure 12-17. Port Option Control Register (POC) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Input/Output Ports (I/O) Port Options MC68HC08KL8 — Rev. 2.0 General Release Specification Input/Output Ports (I/O) NON-DISCLOSURE AGREEMENT REQUIRED PBP — Port B Pullup Enable This read/write bit controls the pullup option for the eight bits of port B if its respective port pin is configured as an input. 1 = Configure port B to have internal pullups. 0 = Disconnect port B internal pullups. PAP — Port A Pullup Enable This read/write bit controls the pullup option for the eight bits of port A if its respective port pin is configured as an input. 1 = Configure port A to have internal pullups. 0 = Disconnect port A internal pullups. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Input/Output Ports (I/O) General Release Specification MC68HC08KL8 — Rev. 2.0 Input/Output Ports (I/O) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Computer Operating Properly (COP) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 13. Computer Operating Properly (COP)

13.1 Contents

13.2 Introduction

This COP module contains a free-running counter that generates a reset if allowed to overflow. The COP module helps software recover from runaway code. Prevent a COP reset by clearing the COP counter periodically. A mask option is available to disable the COP module. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Computer Operating Properly (COP) General Release Specification MC68HC08KL8 — Rev. 2.0 Computer Operating Properly (COP)

13.3 Functional Description

Figure 13-1 shows the structure of the COP module. Figure 13-1. COP Block Diagram Addr. Register Name Bit 7 6 5 4321 Bit 0 $FFFF COP Control Register (COPCTL) Read: Low Byte of Reset Vector Write: Writing Clears COP Counter (Any Value) Reset: Unaffected by Reset Figure 13-2. COP I/O Register Summary COPCTL WRITE CGMXCLK RESET VECTOR FETCH SIM RESET CIRCUIT RESET STATUS REGISTER INTERNAL RESET SOURCES(1) SIM CLEAR STAGES 5–12 12-BIT COP PRESCALER CLEAR ALL STAGES 6-BIT COP COUNTER COP DISABLE RESET COPCTL WRITE CLEAR COP MODULE COPEN (FROM SIM) COP COUNTER NOTE: 1. SeeSection 8. System Integration Module (SIM) for more details. COP CLOCK COP TIMEOUT STOP INSTRUCTION (MASK OPTION) COP TIMEOUT PERIOD (MASK OPTION) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Computer Operating Properly (COP) I/O Signals MC68HC08KL8 — Rev. 2.0 General Release Specification Computer Operating Properly (COP) NON-DISCLOSURE AGREEMENT REQUIRED The COP counter is a free-running 6-bit counter preceded by a 12-bit prescaler counter. If not cleared by software, the COP counter overflows and generates an asynchronous reset after 218 –2 4 or 213 –2 4 CGMXCLK cycles, depending on the mask option selected for COP timeout period. With a 218 –2 4 CGMXCLK cycle overflow option, a 4.9152-MHz crystal gives a COP timeout period of 53.3 ms. Writing any value to location $FFFF before an overflow occurs prevents a COP reset by clearing the COP counter and stages 12 through 5 of the SIM counter. NOTE: Service the COP immediately after reset and before entering or after exiting stop mode to guarantee the maximum time before the first COP counter overflow. A COP reset pulls theRST pin low for 32 CGMXCLK cycles and sets the COP bit in the reset status register (RSR). In monitor mode, the COP is disabled if theRST pin or theIRQ1 is held at VTST . During the break state, VTST on theRST pin disables the COP. NOTE: Place COP clearing instructions in the main program and not in an interrupt subroutine. Such an interrupt subroutine could keep the COP from generating a reset even while the main program is not working properly.

13.4 I/O Signals

The following paragraphs describe the signals shown inFigure 13-1.

13.4.1 CGMXCLK

CGMXCLK is the crystal oscillator output signal. CGMXCLK frequency is equal to the crystal frequency.

13.4.2 STOP Instruction

The STOP instruction clears the COP prescaler. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Computer Operating Properly (COP) General Release Specification MC68HC08KL8 — Rev. 2.0 Computer Operating Properly (COP)

13.4.3 COPCTL Write

Writing any value to the COP control register (COPCTL) (see13.5 COP Control Register) clears the COP counter and clears bits 12 through 4 of the SIM counter. Reading the COP control register returns the low byte of the reset vector.

13.4.4 Power-On Reset

The power-on reset (POR) circuit in the SIM clears the COP prescaler 4096 CGMXCLK cycles after power-up.

13.4.5 Internal Reset

An internal reset clears the SIM counter and the COP counter.

13.4.6 Reset Vector Fetch

A reset vector fetch occurs when the vector address appears on the data bus. A reset vector fetch clears the COP prescaler.

13.4.7 COPD (COP Disable)

The COPD signal reflects the state of the COP disable bit mask option.

13.4.8 COPRS (COP Rate Select)

The COPRS signal reflects the state of the COP rate select mask option. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Computer Operating Properly (COP) COP Control Register MC68HC08KL8 — Rev. 2.0 General Release Specification Computer Operating Properly (COP) NON-DISCLOSURE AGREEMENT REQUIRED

13.5 COP Control Register

The COP control register is located at address $FFFF and overlaps the reset vector. Writing any value to $FFFF clears the COP counter and starts a new timeout period. Reading location $FFFF returns the low byte of the reset vector.

13.6 Interrupts

The COP does not generate CPU interrupt requests.

13.7 Monitor Mode

The COP is disabled in monitor mode when VTST is present on theIRQ1 pin or on theRST pin.

13.8 Low-Power Modes

The WAIT and STOP instructions put the MCU in low-power standby modes.

13.8.1 Wait Mode

The COP remains active during wait mode. To prevent a COP reset during wait mode, periodically clear the COP counter in a CPU interrupt routine. $FFFF Bit 7 654321 Bit 0 Read: Low Byte of Reset Vector Write: Writing Clears COP Counter (Any Value) Reset: Unaffected by Reset Figure 13-3. COP Control Register (COPCTL) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Computer Operating Properly (COP) General Release Specification MC68HC08KL8 — Rev. 2.0 Computer Operating Properly (COP)

13.8.2 Stop Mode

Stop mode turns off the CGMXCLK input to the COP and clears the COP prescaler. Service the COP immediately before entering or after exiting stop mode to ensure a full COP timeout period after entering or exiting stop mode. To prevent inadvertently turning off the COP with a STOP instruction, a mask option is available that disables the STOP instruction. When the STOP instruction is disabled, execution of a STOP instruction results in an illegal opcode reset.

13.9 COP Module During Break Mode

The COP is disabled during a break interrupt when VTST is present on theRST pin. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification External Interrupt (IRQ) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 14. External Interrupt (IRQ)

14.1 Contents

14.2 Introduction

The IRQ module provides an external interrupt input. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED External Interrupt (IRQ) General Release Specification MC68HC08KL8 — Rev. 2.0 External Interrupt (IRQ)

14.3 Features

Features of the IRQ module include:

• A Dedicated External Interrupt Pin,IRQ1
• IRQ1 Interrupt Control Bits
• Hysteresis Buffer
• Programmable Edge-Only or Edge and Level Interrupt Sensitivity
• Automatic Interrupt Acknowledge
• IRQ1 Pin Includes Internal Pullup Resistor

14.4 Functional Description

A logic 0 applied to the external interrupt pin can latch a CPU interrupt request.Figure 14-1shows the structure of the IRQ module. Interrupt signals on theIRQ1 pin are latched into the IRQ1 latch. An interrupt latch remains set until one of the following actions occurs:

• Vector fetch — A vector fetch automatically generates an interrupt acknowledge signal that clears the IRQ latch.
• Software clear — Software can clear the interrupt latch by writing to the acknowledge bit in the interrupt status and control register (ISCR). Writing a logic 1 to the ACK1 bit clears the IRQ1 latch.
• Reset — A reset automatically clears the interrupt latch. The external interrupt pin is falling-edge-triggered and is software- configurable to be either falling-edge or low-level-triggered. The MODE1 bit in the ISCR controls the triggering sensitivity of theIRQ1 pin. When the interrupt pin is edge-triggered only, the CPU interrupt request remains set until a vector fetch, software clear, or reset occurs. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

External Interrupt (IRQ) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification External Interrupt (IRQ) NON-DISCLOSURE AGREEMENT REQUIRED When the interrupt pin is both falling-edge and low-level-triggered, the CPU interrupt request remains set until both of the following occur:

• Vector fetch or software clear
• Return of the interrupt pin to logic 1 The vector fetch or software clear may occur before or after the interrupt pin returns to logic 1. As long as the pin is low, the interrupt request remains pending. A reset will clear the latch and the MODE1 control bit, thereby clearing the interrupt even if the pin stays low. When set, the IMASK1 bit in the ISCR mask all external interrupt requests. A latched interrupt request is not presented to the interrupt priority logic unless the IMASK1 bit is clear. NOTE: The interrupt mask (I) in the condition code register (CCR) masks all interrupt requests, including external interrupt requests. (See8.6 Exception Control.) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

External Interrupt (IRQ) IRQ1 Pin MC68HC08KL8 — Rev. 2.0 General Release Specification External Interrupt (IRQ) NON-DISCLOSURE AGREEMENT REQUIRED

14.5 IRQ1 Pin

A logic 0 on theIRQ1 pin can latch an interrupt request into theIRQ1 latch. A vector fetch, software clear, or reset clears theIRQ1 latch. If the MODE1 bit is set, theIRQ1 pin is both falling-edge-sensitive and low-level-sensitive. With MODE1 set, both of the following actions must occur to clear IRQ1:

• Vector fetch or software clear — A vector fetch generates an interrupt acknowledge signal to clear the latch. Software may generate the interrupt acknowledge signal by writing a logic 1 to the ACK1 bit in the interrupt status and control register (ISCR). The ACK1 bit is useful in applications that poll theIRQ1 pin and require software to clear the IRQ1 latch. Writing to the ACK1 bit prior to leaving an interrupt service routine can also prevent spurious interrupts due to noise. Setting ACK1 does not affect subsequent transitions on theIRQ1 pin. A falling edge that occurs after writing to the ACK1 bit latches another interrupt request. If the IRQ1 mask bit, IMASK1, is clear, the CPU loads the program counter with the vector address at locations $FFFA and $FFFB.
• Return of theIRQ1 pin to logic 1 — As long as theIRQ1 pin is at logic 0, IRQ1 remains active. The vector fetch or software clear and the return of theIRQ1 pin to logic 1 may occur in any order. The interrupt request remains pending as long as theIRQ1 pin is at logic 0. A reset will clear the latch and the MODE1 control bit, thereby clearing the interrupt even if the pin stays low. If the MODE1 bit is clear, theIRQ1 pin is falling-edge-sensitive only. With MODE1 clear, a vector fetch or software clear immediately clears the IRQ1 latch. The IRQF1 bit in the ISCR register can be used to check for pending interrupts. The IRQF1 bit is not affected by the IMASK1 bit, which makes it useful in applications where polling is preferred. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED External Interrupt (IRQ) General Release Specification MC68HC08KL8 — Rev. 2.0 External Interrupt (IRQ) Use the BIH or BIL instruction to read the logic level on theIRQ1 pin. NOTE: When using the level-sensitive interrupt trigger, avoid false interrupts by masking interrupt requests in the interrupt routine.

14.6 IRQ Module During Break Interrupts

The system integration module (SIM) controls whether theIRQ1 latch can be cleared during the break state. The BCFE bit in the break flag control register (BFCR) enables software to clear the latches during the break state. (SeeSection 8. System Integration Module (SIM).) To allow software to clear theIRQ1 latch during a break interrupt, write a logic 1 to the BCFE bit. If a latch is cleared during the break state, it remains cleared when the MCU exits the break state. To protect the latches during the break state, write a logic 0 to the BCFE bit. With BCFE at logic 0 (its default state), writing to the ACK1 bit in the IRQ status and control register during the break state has no effect on the IRQ latch.

14.7 IRQ Status and Control Register

The IRQ status and control register (ISCR) controls and monitors operation of the IRQ module. The ISCR has the following functions:

• Shows the state of theIRQ1 flag
• Clears theIRQ1 latch
• Masks IRQ1 and interrupt request
• Controls triggering sensitivity of theIRQ1 interrupt pin Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

External Interrupt (IRQ) IRQ Status and Control Register MC68HC08KL8 — Rev. 2.0 General Release Specification External Interrupt (IRQ) NON-DISCLOSURE AGREEMENT REQUIRED IRQF1 — IRQ1 Flag This read-only status bit is high when theIRQ1 interrupt is pending. 1 =IRQ1 interrupt pending 0 =IRQ1 interrupt not pending ACK1 — IRQ1 Interrupt Request Acknowledge Bit Writing a logic 1 to this write-only bit clears theIRQ1 latch. ACK1 always reads as logic 0. Reset clears ACK1. IMASK1 — IRQ1 Interrupt Mask Bit Writing a logic 1 to this read/write bit disablesIRQ1 interrupt requests. Reset clears IMASK1. 1 =IRQ1 interrupt requests disabled 0 =IRQ1 interrupt requests enabled MODE1 — IRQ1 Edge/Level Select Bit This read/write bit controls the triggering sensitivity of theIRQ1 pin. Reset clears MODE1. 1 =IRQ1 interrupt requests on falling edges and low levels 0 =IRQ1 interrupt requests on falling edges only Address: $001E Bit 7 654321 Bit 0 Read: 0000 IRQF1 0 IMASK1 MODE1 Write: ACK1 Reset: 00000000 = Unimplemented Figure 14-3. IRQ Status and Control Register (ISCR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED External Interrupt (IRQ) General Release Specification MC68HC08KL8 — Rev. 2.0 External Interrupt (IRQ) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Keyboard Interrupt Module (KBI) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 15. Keyboard Interrupt Module (KBI)

15.1 Contents

15.2 Introduction

The keyboard module provides eight independently maskable external interrupts. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Keyboard Interrupt Module (KBI) General Release Specification MC68HC08KL8 — Rev. 2.0 Keyboard Interrupt Module (KBI)

15.3 Features

Features of the keyboard interrupt module (KBI) include:

• Eight Keyboard Interrupt Pins with Separate Keyboard Interrupt Enable Bits and One Keyboard Interrupt Mask
• Hysteresis Buffers
• Programmable Edge-Only or Edge- and Level-Interrupt Sensitivity
• Exit from Low-Power Modes Figure 15-1. Keyboard Module Block Diagram KB0IE KB7IE ... KEYBOARD INTERRUPT DQ CK CLR VDD MODEK IMASKKKEYBOARD INTERRUPT FF REQUEST VECTOR FETCH DECODERACKK INTERNAL BUS RESET TO PULLUP ENABLE KBD7 KBD0 TO PULLUP ENABLE SYNCHRONIZER KEYF Addr. Register Name Bit 7 6 5 4 3 2 1 Bit 0 $000D Keyboard Status and Control Register (KBSCR) Read: 0000 KEYF 0 IMASKK MODEK Write: ACKK Reset: 00000000 $000E Keyboard Interrupt Enable Register (KBIER) Read: KBIE7 KBIE6 KBIE5 KBIE4 KBIE3 KBIE2 KBIE1 KBIE0 Write: Reset: 00000000 = Unimplemented Figure 15-2. I/O Register Summary Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Keyboard Interrupt Module (KBI) Functional Description MC68HC08KL8 — Rev. 2.0 General Release Specification Keyboard Interrupt Module (KBI) NON-DISCLOSURE AGREEMENT REQUIRED

15.4 Functional Description

Writing to the KBIE7–KBIE0 bits in the keyboard interrupt enable register independently enables or disables each port D pin as a keyboard interrupt pin. Enabling a keyboard interrupt pin also enables its internal pullup device. A logic 0 applied to an enabled keyboard interrupt pin latches a keyboard interrupt request. A keyboard interrupt is latched when one or more keyboard pins goes low after all were high. The MODEK bit in the keyboard status and control register controls the triggering mode of the keyboard interrupt.

• If the keyboard interrupt is edge-sensitive only, a falling edge on a keyboard pin does not latch an interrupt request if another keyboard pin is already low. To prevent losing an interrupt request on one pin because another pin is still low, software can disable the latter pin while it is low.
• If the keyboard interrupt is falling edge- and low level-sensitive, an interrupt request is present as long as any keyboard pin is low. If the MODEK bit is set, the keyboard interrupt pins are both falling edge- and low level-sensitive, and both of the following actions must occur to clear a keyboard interrupt request:
• Vector fetch or software clear — A vector fetch generates an interrupt acknowledge signal to clear the interrupt request. Software may generate the interrupt acknowledge signal by writing a logic 1 to the ACKK bit in the keyboard status and control register (KBSCR). The ACKK bit is useful in applications that poll the keyboard interrupt pins and require software to clear the keyboard interrupt request. Writing to the ACKK bit prior to leaving an interrupt service routine also can prevent spurious interrupts due to noise. Setting ACKK does not affect subsequent transitions on the keyboard interrupt pins. A falling edge that occurs after writing to the ACKK bit latches another interrupt request. If the keyboard interrupt mask bit, IMASKK, is clear, the CPU loads the program counter with the vector address at locations $FFE0 and $FFE1. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Keyboard Interrupt Module (KBI) General Release Specification MC68HC08KL8 — Rev. 2.0 Keyboard Interrupt Module (KBI)

• Return of all enabled keyboard interrupt pins to logic1—A s long as any enabled keyboard interrupt pin is at logic 0, the keyboard interrupt remains set. The vector fetch or software clear and the return of all enabled keyboard interrupt pins to logic 1 may occur in any order. If the MODEK bit is clear, the keyboard interrupt pin is falling-edge- sensitive only. With MODEK clear, a vector fetch or software clear immediately clears the keyboard interrupt request. Reset clears the keyboard interrupt request and the MODEK bit, clearing the interrupt request even if a keyboard interrupt pin stays at logic 0. The keyboard flag bit (KEYF) in the keyboard status and control register can be used to see if a pending interrupt exists. The KEYF bit is not affected by the keyboard interrupt mask bit (IMASKK) which makes it useful in applications where polling is preferred. To determine the logic level on a keyboard interrupt pin, use the data direction register to configure the pin as an input and read the data register. NOTE: Setting a keyboard interrupt enable bit (KBIEx) forces the corresponding keyboard interrupt pin to be an input, overriding the data direction register. However, the data direction register bit must be a logic 0 for software to read the pin.

15.5 Keyboard Initialization

When a keyboard interrupt pin is enabled, it takes time for the internal pullup to reach a logic 1. Therefore, a false interrupt can occur as soon as the pin is enabled. To prevent a false interrupt on keyboard initialization: 1. Mask keyboard interrupts by setting the IMASKK bit in the keyboard status and control register. 2. Enable the KBI pins by setting the appropriate KBIEx bits in the keyboard interrupt enable register. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Keyboard Interrupt Module (KBI) Low-Power Modes MC68HC08KL8 — Rev. 2.0 General Release Specification Keyboard Interrupt Module (KBI) NON-DISCLOSURE AGREEMENT REQUIRED 3. Write to the ACKK bit in the keyboard status and control register to clear any false interrupts. 4. Clear the IMASKK bit. An interrupt signal on an edge-triggered pin can be acknowledged immediately after enabling the pin. An interrupt signal on an edge- and level-triggered interrupt pin must be acknowledged after a delay that depends on the external load. Another way to avoid a false interrupt: 1. Configure the keyboard pins as outputs by setting the appropriate DDRD bits in data direction register D. 2. Write logic 1s to the appropriate port D data register bits. 3. Enable the KBI pins by setting the appropriate KBIEx bits in the keyboard interrupt enable register.

15.6 Low-Power Modes

The WAIT and STOP instructions put the MCU in low-power standby modes.

15.6.1 Wait Mode

The keyboard module remains active in wait mode. Clearing the IMASKK bit in the keyboard status and control register enables keyboard interrupt requests to bring the MCU out of wait mode.

15.6.2 Stop Mode

The keyboard module remains active in stop mode. Clearing the IMASKK bit in the keyboard status and control register enables keyboard interrupt requests to bring the MCU out of stop mode. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Keyboard Interrupt Module (KBI) General Release Specification MC68HC08KL8 — Rev. 2.0 Keyboard Interrupt Module (KBI)

15.7 Keyboard Module During Break Interrupts

The system integration module (SIM) controls whether the keyboard interrupt latch can be cleared during the break state. The BCFE bit in the break flag control register (BFCR) enables software to clear status bits during the break state. To allow software to clear the keyboard interrupt latch during a break interrupt, write a logic 1 to the BCFE bit. If a latch is cleared during the break state, it remains cleared when the MCU exits the break state. To protect the latch during the break state, write a logic 0 to the BCFE bit. With BCFE at logic 0 (its default state), writing to the keyboard acknowledge bit (ACKK) in the keyboard status and control register during the break state has no effect. (See15.8.1 Keyboard Status and Control Register.)

15.8 I/O Registers

These registers control and monitor operation of the keyboard module:

• Keyboard status and control register (KBSCR)
• Keyboard interrupt enable register (KBIER)

15.8.1 Keyboard Status and Control Register

The keyboard status and control register:

• Flags keyboard interrupt requests
• Acknowledges keyboard interrupt requests
• Masks keyboard interrupt requests
• Controls keyboard interrupt triggering sensitivity Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Keyboard Interrupt Module (KBI) I/O Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Keyboard Interrupt Module (KBI) NON-DISCLOSURE AGREEMENT REQUIRED Bits 7–4 — Not used These read-only bits always read as logic 0s. KEYF — Keyboard Flag Bit This read-only bit is set when a keyboard interrupt is pending. Reset clears the KEYF bit. 1 = Keyboard interrupt pending 0 = No keyboard interrupt pending ACKK — Keyboard Acknowledge Bit Writing a logic 1 to this write-only bit clears the keyboard interrupt request. ACKK always reads as logic 0. Reset clears ACKK. IMASKK — Keyboard Interrupt Mask Bit Writing a logic 1 to this read/write bit prevents the output of the keyboard interrupt mask from generating interrupt requests. Reset clears the IMASKK bit. 1 = Keyboard interrupt requests masked 0 = Keyboard interrupt requests not masked MODEK — Keyboard Triggering Sensitivity Bit This read/write bit controls the triggering sensitivity of the keyboard interrupt pins. Reset clears MODEK. 1 = Keyboard interrupt requests on falling edges and low levels 0 = Keyboard interrupt requests on falling edges only Address: $000D Bit 7 654321 Bit 0 Read: 0000 KEYF 0 IMASKK MODEK Write: ACKK Reset: 00000000 = Unimplemented Figure 15-3. Keyboard Status and Control Register (KBSCR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Keyboard Interrupt Module (KBI) General Release Specification MC68HC08KL8 — Rev. 2.0 Keyboard Interrupt Module (KBI)

15.8.2 Keyboard Interrupt Enable Register

The keyboard interrupt enable register enables or disables each port D pin to operate as a keyboard interrupt pin. KBIE7–KBIE0 — Keyboard Interrupt Enable Bits Each of these read/write bits enables the corresponding keyboard interrupt pin to latch interrupt requests. Reset clears the keyboard interrupt enable register. 1 = PDx pin enabled as keyboard interrupt pin 0 = PDx pin not enabled as keyboard interrupt pin Address: $000E Bit 7 654321 Bit 0 Read: KBIE7 KBIE6 KBIE5 KBIE4 KBIE3 KBIE2 KBIE1 KBIE0 Write: Reset: 00000000 Figure 15-4. Keyboard Interrupt Enable Register (KBIER) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Break Module (BREAK) NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 16. Break Module (BREAK)

16.1 Contents

16.2 Introduction

This section describes the break module. To enter a background program, the break module can generate a break interrupt that stops normal program flow at a defined address. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Break Module (BREAK) General Release Specification MC68HC08KL8 — Rev. 2.0 Break Module (BREAK)

16.3 Features

Features of the break module include:

• Accessible I/O Registers during the Break Interrupt
• CPU-Generated Break Interrupts
• Software-Generated Break Interrupts
• COP Disabling during Break Interrupts

16.4 Functional Description

When the internal address bus matches the value written in the break address registers, the break module issues a breakpoint signal (BKPT) to the SIM. The SIM then causes the CPU to load the instruction register with a software interrupt instruction (SWI) after completion of the current CPU instruction. The program counter vectors to $FFFC and $FFFD ($FEFC and $FEFD in monitor mode). These events can cause a break interrupt to occur:

• A CPU-generated address (the address in the program counter) matches the contents of the break address registers.
• Software writes a logic 1 to the BRKA bit in the break status and control register. When a CPU-generated address matches the contents of the break address registers, the break interrupt begins after the CPU completes its current instruction. A return-from-interrupt instruction (RTI) in the break routine ends the break interrupt and returns the MCU to normal operation.Figure 16-1 shows the structure of the break module. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Break Module (BREAK) General Release Specification MC68HC08KL8 — Rev. 2.0 Break Module (BREAK)

16.4.1 Flag Protection During Break Interrupts

The system integration module (SIM) controls whether or not module status bits can be cleared during the break state. The BCFE bit in the break flag control register (BFCR) enables software to clear status bits during the break state. (See8.8.3 Break Flag Control Registerand see the break interrupts subsection for each module.)

16.4.2 CPU During Break Interrupts

The CPU starts a break interrupt by:

• Loading the instruction register with the SWI instruction
• Loading the program counter with $FFFC:$FFFD ($FEFC:$FEFD in monitor mode) The break interrupt begins after completion of the CPU instruction in progress. If the break address register match occurs on the last cycle of a CPU instruction, the break interrupt begins immediately.

16.4.3 TIM During Break Interrupts

A break interrupt stops the timer counter.

16.4.4 COP During Break Interrupts

The COP is disabled during a break interrupt when VTST is present on the RST pin. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Break Module (BREAK) Break Module Registers MC68HC08KL8 — Rev. 2.0 General Release Specification Break Module (BREAK) NON-DISCLOSURE AGREEMENT REQUIRED

16.5 Break Module Registers

Three registers control and monitor operation of the break module:

• Break status and control register (BRKSCR)
• Break address register high (BRKH)
• Break address register low (BRKL)

16.5.1 Break Status and Control Register

The break status and control register contains break module enable and status bits. BRKE — Break Enable Bit This read/write bit enables breaks on break address register matches. Clear BRKE by writing a logic 0 to bit 7. Reset clears the BRKE bit. 1 = Breaks enabled on 16-bit address match 0 = Breaks disabled BRKA — Break Active Bit This read/write status and control bit is set when a break address match occurs. Writing a logic 1 to BRKA generates a break interrupt. Clear BRKA by writing a logic 0 to it before exiting the break routine. Reset clears the BRKA bit. 1 = Break address match 0 = No break address match Address: $FE0E Bit 7 654321 Bit 0 Read: BRKE BRKA 000000 Write: Reset: 00000000 = Unimplemented Figure 16-3. Break Status and Control Register (BRKSCR) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Break Module (BREAK) General Release Specification MC68HC08KL8 — Rev. 2.0 Break Module (BREAK)

16.5.2 Break Address Registers

The break address registers contain the high and low bytes of the desired breakpoint address. Reset clears the break address registers.

16.6 Low-Power Modes

The WAIT and STOP instructions put the MCU in low-power standby modes.

16.6.1 Wait Mode

If enabled, the break module is active in wait mode. In the break routine, the user can subtract 1 from the return address on the stack if SBSW is set (see8.7 Low-Power Modes). Clear the SBSW bit by writing logic 0 to it.

16.6.2 Stop Mode

A break interrupt causes exit from stop mode and sets the SBSW bit in the break status register. See8.8 SIM Registers. BRKH Address: $FE0C Bit 7 6 5 4321 Bit 0 Read: Bit 15 14 13 12 11 10 9 Bit 8 Write: Reset: 0 0 0 00000 BRKL Address: $FE0D Bit 7 6 5 4321 Bit 0 Read: Bit 7 6 5 4321 Bit 0 Write: Reset: 0 0 0 00000 Figure 16-4. Break Address Registers (BRKH and BRKL) Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Electrical Specifications NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 17. Electrical Specifications

17.1 Contents

17.2 Introduction

This section contains electrical and timing specifications. These values are design targets and have not yet been fully tested. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Electrical Specifications General Release Specification MC68HC08KL8 — Rev. 2.0 Electrical Specifications

17.3 Absolute Maximum Ratings

Maximum ratings are the extreme limits to which the MCU can be exposed without permanently damaging it. The MCU contains circuitry to protect the inputs against damage from high static voltages; however, do not apply voltages higher than those shown in the table. Keep VInand VOut within the range VSS ≤ (VIn or VOut) ≤ VDD . Connect unused inputs to the appropriate voltage level, either VSS or VDD . NOTE: This device is not guaranteed to operate properly at the maximum ratings. Refer to17.6 DC Electrical Characteristics for guaranteed operating conditions. Characteristic(1) 1. Voltages referenced to VSS Symbol Value Unit Supply Voltage VDD, VDDREG –0.3 to +6.0 V Regulator Supply Voltage V DDREG –0.3 to +6.0 V Input Voltage V IN VSS –0.3 to VDD +0.3 V Programming Voltage V PP VSS –0.3 to 14.0 V Maximum Current Per Pin Excluding VDD and VSS I ± 25 mA Storage Temperature T STG –55 to +150 °C Maximum Current Out of VSS IMVSS 100 mA Maximum Current Into VDD IMVDD 100 mA Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Functional Operating Range MC68HC08KL8 — Rev. 2.0 General Release Specification Electrical Specifications NON-DISCLOSURE AGREEMENT REQUIRED

17.4 Functional Operating Range

17.5 Thermal Characteristics

Characteristic Symbol Value Unit Operating Temperature Range T A 0 to 85 °C Operating Voltage Range V DD 4.4 to 5.5 V Operating Regulator Voltage Range Bypass Not Enabled Bypass Enabled VDDREG 4.4 to 5.5 3.0 to 3.6 V Characteristic Symbol Value Unit Thermal Resistance Quad Flat Pack, 52 Pins θJA 70 °C/W I/O Pin Power Dissipation P I/O User Determined W Power Dissipation(1) 1. Power dissipation is a function of temperature. PD PD =( IDD xV DD )+P I/O= K/(TJ + 273°C) W Constant(2) 2. K is a constant unique to the device. K can be determined for a known TA and measured PD . With this value of K, PD and TJ can be determined for any value of TA. K PD x( TA + 273°C) + PD 2 x θJA W/°C Average Junction Temperature T J TA + (PD x θJA) °C Maximum Junction Temperature T JM 100 °C Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Electrical Specifications General Release Specification MC68HC08KL8 — Rev. 2.0 Electrical Specifications

17.6 DC Electrical Characteristics

Characteristic(1) 1. VDD = VDDREG = 4.4 to 5.5 Vdc, VSS = 0 Vdc, TA = TL to TH , unless otherwise noted. Symbol Min Typ(2) 2. Typical values reflect average measurements at midpoint of voltage range, 25°C only. Max Unit Output High Voltage (ILoad = –2.0 mA) All I/O Pins VOH VDD –0.8 — — V Output Low Voltage (ILoad = 1.6 mA) All I/O Pins VOL — — 0.4 V Input High Voltage All Ports,IRQ1,RST, OSC1 VIH 0.7 x VDD —V DD V Input Low Voltage All Ports,IRQ1,RST, OSC1 VIL VSS — 0.3 x V DD V Output High Current (VOH = 2.1 V) Port C in LDD Mode IOH 2.5 4.6 7 mA Output Low Current (VOL = 2.3 V) Port C in LDD Mode IOL 7 13.2 20 mA VDD Supply Current, fop = 1.5 MHz Run, Low Speed USB(3) Run, USB Suspended(3) Wait, Low Speed USB(4) Wait, USB Suspended(4) Stop(5) 25 °C 0 °C to 85°C Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly affects run IDD . Measured with all modules enabled. 4. Wait IDD measured using external square wave clock source (fXCLK = 6 MHz); all inputs 0.2 V from rail; no dc loads; less than 100 pF on all outputs. CL = 20 pF on OSC2; 15 kΩ± 5% termination resistors on D+ and D– pins; all ports configured as inputs; OSC2 capacitance linearly affects wait IDD 5. STOP IDD measured with USB in suspend mode; OSC1 grounded; REGOUT, D+, and D– not connected; no port pins sourcing current. IDD 4.25 3.75 2.25 1.75 180 190 6.0 5.0 3.5 3.0 225 250 mA mA mA mA µA µA I/O Ports Hi-Z Leakage Current I IL —— ± 10 µA Input Current I In —— ± 1 µA Capacitance Ports (as Input or Output) C Out C In 8 pF POR ReArm Voltage(6) 6. Maximum is highest voltage that POR is guaranteed. VPOR 0 — 100 mV POR Rise Time Ramp Rate(7) 7. If minimum VDD is not reached before the internal POR reset is released,RST must be driven low externally until minimum VDD is reached. R POR 0.035 — — V/ms Monitor Mode Entry Voltage V TST VDD + 2.5 13.5 V Pullup Resistor PA0–PA7, PB0–PB7, PC0–PC7, PD0–PD7, RST, IRQ1 R PU 20 35 50 k Ω Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Electrical Specifications NON-DISCLOSURE AGREEMENT REQUIRED

17.7 Control Timing

17.8 Oscillator Characteristics

Characteristic(1) 1. VDD =V DDREG = 4.4 to 5.5 Vdc; VSS = 0 Vdc; timing shown with respect to 20% VDD and 70% VDD , unless otherwise noted. Symbol Min Max Unit Internal Operating Frequency(2) 2. Some modules may require a minimum frequency greater than dc for proper operation; see appropriate table for this informa- tion. fOP — 1.5 MHz RST Input Pulse Width Low(3) 3. Minimum pulse width reset is guaranteed to be recognized. It is possible for a smaller pulse width to cause a reset. tIRL 50 — ns Characteristic Symbol Min Typ Max Unit Crystal Frequency(1) 1. The USB module is designed to function at fXCLK = 6 MHz. The values given here are oscillator specifications. fXCLK 1 — 8 MHz External Clock Reference Frequency(1), (2) 2. No more than 10% duty cycle deviation from 50% fXCLK dc — 32 MHz Crystal Load Capacitance(3) 3. Consult crystal vendor data sheet C L —— — Crystal Fixed Capacitance(3) C 1 — 2 x C L — Crystal Tuning Capacitance(3) C 2 — 2 x C L — Feedback Bias Resistor R B — 10 M Ω — Series Resistor(3), (4) 4. Not required for high-frequency crystals R S —— — Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Electrical Specifications General Release Specification MC68HC08KL8 — Rev. 2.0 Electrical Specifications

17.9 USB DC Electrical Characteristics

Characteristic(1) 1. VDD = 4.4 –5.5 V, VSS = 0 Vdc, TA = 0°C to +85°C, unless otherwise noted Symbol Conditions Min Typ Max Unit Hi-Z State Data Line Leakage I LO 0 V<VIn<3.3 V –10 — +10 µA Differential Input Sensitivity VDI |(D+) – (D–)| 0.2 — V Differential Common Mode Range VCM Includes VDI Range 0.8 — 2.5 V Single Ended Receiver Threshold VSE 0.8 — 2.0 V Static Output Low V OL R L of 1.5 k to 3.6 V — — 0.3 V Static Output High V OH R L of 15 k to GND 2.8 — 3.6 V Regulator Supply Voltage(2),(3) 2. Transceiver pullup resistor of 1.5 kΩ± 5% between REGOUT and D– and 15 kΩ± 5% to ground termination resistors on D+ and D–. 3. No external current draw besides the USB-required external resistors should be connected to the REGOUT pin. VREGOUT IL = 4 mA 3.0 3.3 3.6 V Regulator Bypass Capacitor C REGBYPASS — 0.1 — µF Regulator Bulk Capacitor C REGBULK 1.0 — — µF Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

USB Low-Speed Source Electrical Characteristics MC68HC08KL8 — Rev. 2.0 General Release Specification Electrical Specifications NON-DISCLOSURE AGREEMENT REQUIRED

17.10 USB Low-Speed Source Electrical Characteristics

Characteristic(1) 1. All voltages are measured from local ground, unless otherwise specified. All timings use a capacitive load of 50 pF, unless otherwise specified. Low-speed timings have a 1.5-kΩ pullup to 2.8 V on the D– data line. Symbol Conditions Min Typ Max Unit Internal Operating Frequency f OP — — 1.5 — MHz Transition Time(2) Rise Time Fall Time 2. Transition times are measured from 10% to 90% of the data signal. The rising and falling edges should be smoothly transition- ing (monotonic). Capacitive loading includes 50 pF of tester capacitance. tR tF C L = 50 pF C L = 350 pF C L = 50 pF C L = 350 pF 300 300 ns Rise/Fall Time Matching t RFM tR /tF 80 — 120 % Output Signal Crossover Voltage V CRS 1.3 — 2.0 V Low Speed Data Rate t DRATE 1.5 Mbs± 1.5% 1.4775 676.8 1.500 666.0 1.5225 656.8 Mbs ns Source Differential Driver Jitter To Next Transition For Paired Transitions tUDJ1 tUDJ2 C L = 350 pF Measured at Crossover Point –25 –10 ns Receiver Data Jitter Tolerance To Next Transition For Paired Transitions tDJR1 tDJR2 C L = 350 pF Measured at Crossover Point –75 –45 ns Source EOP Width t EOPT Measured at Crossover Point 1.25 — 1.50 µs Differential to EOP Transition Skew tDEOP Measured at Crossover Point –40 — 100 ns Receiver EOP Width Must Reject as EOP Must Accept tEOPR1 tEOPR2 Measured at Crossover Point 330 675 ns Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Electrical Specifications General Release Specification MC68HC08KL8 — Rev. 2.0 Electrical Specifications

17.11 USB Signaling Levels

From Originating Driver At Receiver Differential 1 (D+) – (D–) > 200 mV and D+ or D– > V SE (min) Differential 0 (D+) – (D–) < –200 mV and D+ or D– > V SE (min) Data J State Low Speed Full Speed Differential 0 Differential 1 Data K State Low Speed Full Speed Differential 1 Differential 0 Idle State Low Speed Full Speed Differential 0 and D– > VSE (max) and D+ < VSE (min) Differential 1 and D+ > VSE (max) and D– < VSE (min) Resume State Low Speed Full Speed Differential 1 and D+ > VSE (max) and D– < VSE (min) Differential 0 and D– > VSE (max and D+ < VSE (min) Start of Packet (SOP) Data lines switch from Idle to K State End of Packet (EOP) D+ and D– < VSE (min) for 2 Bit Times(1) Followed by an Idle for 1 Bit Time 1. The width of EOP is defined in bit times relative to the speed of transmission. D+ and D– < VSE (min) for 1 Bit Time(2)Followed by a J State 2. The width of EOP is defined in bit times relative to the device type receiving the EOP. Disconnect Upstream Only D+ and D– < V SE (max) for 2.5µs Connect Upstream Only D+ or D– > V SE (max) for 2.5µs Reset Downstream Only D+ and D– < V SE for 10 ms D+ and D– < VSE (min) for 2.5µs; Must be Recognized within 5.5µs)(3) 3. These times apply to an active device that is not in the suspend state. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Timer Interface Module Characteristics MC68HC08KL8 — Rev. 2.0 General Release Specification Electrical Specifications NON-DISCLOSURE AGREEMENT REQUIRED

17.12 Timer Interface Module Characteristics

17.13 Memory Characteristics

Characteristic Symbol Min Max Unit Input Capture Pulse Width t TIH,tTIL 125 — ns Input Clock Pulse Width t TCH, tTCL (1/fOP ) + 5 — ns Characteristic Symbol Min Typ Max Unit RAM Data Retention Voltage V RM 1.3 — — V Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Electrical Specifications General Release Specification MC68HC08KL8 — Rev. 2.0 Electrical Specifications Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification Mechanical Specifications NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 18. Mechanical Specifications

18.1 Contents

18.2 Introduction

The MC68HC08KL8 is available in a 52-lead plastic quad flat pack (QFP) package and a 42-lead shrink dual in-line package (SDIP). This section gives the dimensions for these packages. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Mechanical Specifications General Release Specification MC68HC08KL8 — Rev. 2.0 Mechanical Specifications

18.3 Quad Flat Pack (Case 848B-04)

NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DATUM PLANE –H– IS LOCATED AT BOTTOM OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE BOTTOM OF THE PARTING LINE. 4. DATUMS –A–, –B– AND –D– TO BE DETERMINED AT DATUM PLANE –H–. 5. DIMENSIONS S AND V TO BE DETERMINED AT SEATING PLANE –C–. 6. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.25 (0.010) PER SIDE. DIMENSIONS A AND B DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE –H–. 7. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. DETAIL A L 40 26 52 14 L –A– B V SA–BM0.20 (0.008) D SH A–B0.05 (0.002) SA–BM0.20 (0.008) D SC –D– B V –B– SA–BM0.20 (0.008) D SH A–B0.05 (0.002) SA–BM0.20 (0.008) D SC –H– 0.10 (0.004) –C– SEATING PLANE DATUM PLANE MG H E C M /C0095 /C0095 DETAIL C U /C0095 Q /C0095 X W KT R DETAIL C DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.90 10.10 0.390 0.398 B 9.90 10.10 0.390 0.398 C 2.10 2.45 0.083 0.096 D 0.22 0.38 0.009 0.015 E 2.00 2.10 0.079 0.083 F 0.22 0.33 0.009 0.013 G 0.65 BSC 0.026 BSC J 0.13 0.23 0.005 0.009 K 0.65 0.95 0.026 0.037 L 7.80 REF 0.307 REF M 5 10 5 10 N 0.13 0.17 0.005 0.007 Q 0 7 0 7 R 0.13 0.30 0.005 0.012 S 12.95 13.45 0.510 0.530 V 12.95 13.45 0.510 0.530 W 0.35 0.45 0.014 0.018 X 1.6 REF 0.063 REF /C0095/C0095/C0095/C0095 /C0095/C0095/C0095/C0095 /C0095/C0095 B B DETAIL A JN D F BASE METAL SECTION B–B SA–BM0.02 (0.008) D SC Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Shrink Dual In-Line Package (Case 858-01) MC68HC08KL8 — Rev. 2.0 General Release Specification Mechanical Specifications NON-DISCLOSURE AGREEMENT REQUIRED

18.4 Shrink Dual In-Line Package (Case 858-01)

/C0052/C0051 /C0052 /C0052 /C0051 /C0052 /C0052 /C0051 /C0052 /C0051/C0055 /C0052 /C0055 /C0051 /C0051/C0052/C0051 /C0051 /C0052 /C0051/C0055 /C0051/C0052 /C0051 -B- -A- C D 42 PL F K G N J 42 PL M /C0077/C0073 /C0077/C0073/C0077 /C0077 /C0073 /C0077/C0073 /C0073/C0077 /C0073/C0077 /C0074 /C0077 H L /C0055/C0055 /C0055 /C0055 /C0051 /C0052 %/C0052 /C0051 /C0052 12 1 42 22 /C0073 -T- Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED Mechanical Specifications General Release Specification MC68HC08KL8 — Rev. 2.0 Mechanical Specifications Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MC68HC08KL8 — Rev. 2.0 General Release Specification

Ordering Information

NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification — MC68HC08KL8 Section 19. Ordering Information

19.1 Contents

19.2 Introduction

This section contains ordering information.

19.3 MC Order Numbers

Table 19-1. MC Order Numbers MC Order Number Operating Temperature Range MC68HC08KL8FB (1) 1. FB = Quad Flat Pack 0 °C to + 85°C MC68HC08KL8B (2) 2. B = Shrink Dual In-Line Package 0 °C to + 85°C Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

NON-DISCLOSURE AGREEMENT REQUIRED General Release Specification MC68HC08KL8 — Rev. 2.0 iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

© Motorola, Inc., 1998 Mfax is a trademark of Motorola, Inc. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...