6882025 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Edition • 2023-07-21T16:20:32+02:00 FOUNDATION fieldbus Backplane for the DPC System DPC-49-4RMB/SY The DPC system (Diagnostic Power Condi- tioner) is a power supply system for the instal- lation of FOUNDATION™ fieldbus H1 seg- ments. It provides extensive diagnostic op- tions for monitoring FOUNDATION™ fieldbus segments and thus supports plantwide asset management. A DPC system consists of one or more DPC-49-MB-RC module racks, each with up to eight DPC-49-IPS power supply modules and one DPC-49-ADU or DPC-49-DU diag- nostics module . Up to four H1 segments for each module rack can be operated and mon- itored redundantly in the FOUNDATION™ fieldbus network. The diagnostic data of the H1 segments can be transmitted via the HSE interface module DPC-49-HSEFD/24VDC to the higher level Asset Management system. The module rack consist of a backplane and the actual rack system for the power supply modules and the diagnostics module. The single components of the system are electrically linked via the connection terminals of the backplane. From electrical perspective, the backplane is to be considered passive. The power can be supplied via two 2-pole screw connectors. The connection to the host system is provided via two system cables. Premoulded system cables are optionally available at TURCK. For the connection of the H1 segments to the fieldbus side, each segment is individually connected with a removable 3-pole screw ter- minal. The shielding is achieved via insulated shield bus or via the 3-pole screw terminal, which is internally connected with the M5 threaded bolt for equipotential bonding. A further M5 thread- ed bolt for equipontential bonding is simply connected to the housing. For simple diagnostics processing, a connec- tion is provided to the relay alarm contact of the diagnostics module. ■ Module rack for up to eight power supply modules and one diagnostic module for up to four redundant H1 segments. ■ Redundant power supply ■ Redundant HOST connection ■ Removable terminal blocks with screw connections ■ RJ45 connector for HSE fieldbus diagnos- tics
Edition • 2023-07-21T16:20:32+02:00 Type DPC-49-4RMB/SY ID 6882025 Operating voltage 18…32 VDC Surge protection > 250 VDC Displays/Operating elements Electrical connection Removable terminal block, reverse polarity protect- ed, screw connection RJ45 socket Protection class IP20 MTTF 115 years acc. to SN 29500 (Ed. 99) 40 °C Ambient temperature -20…+60 °C Housing material Aluminium Housing color Black/yellow Dimensions 220 x 210 x 113 mm Connection mode snap-fit on DIN rail (DIN 60715) Dimensions
Edition • 2023-07-21T16:20:32+02:00 Accessories Type code Ident-No. Dimension drawing BM-DPC 6882015 blind module for unused slots