6839130 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

■Fully welded metal measuring cell ■Pressure range 0…250 bar rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Wiring diagram Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal measuring cell in various pressure ranges of up to -1…1000 bar in 2-, 3- or even 4-wire technology. Depending on the sensor variant, the processed signal is available as an analog output signal (4…20 mA, 0…

10 V, 0…5 V, 1…6 V, ratiometric) or as a

digital IO-Link process parameter. The IO-Link sensor variants also have two independently configurable switching outputs. In addition to the standard variants, there are special sensors for uses such as ATEX areas or for oxygen applications. A wide range of process connections and electrical connections offer a high degree of flexibility in a wide range of applications.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|4 PT250R-2004-I2-H1144 | 11/08/2023 00-08 | technical changes reserved Technical data Resolution <± 0.1 % FS Accuracy LHR ± 0.3 % FS BSL Accuracy LHR ±0.3 % FS (typical; max. ±0.5 % FS) Mechanical data Housing material Stainless-steel/Plastic, 1.4404 (AISI 316L)/polyarylamide 50 % GF UL 94 V-0 Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring Pressure connection material Stainless steel 1.4404 (AISI 316L) Pressure transducer material Stainless steel 1.4435 (AISI 316L) Wrench size pressure connection / coupling nut Max. tightening torque of housing nut 20 Nm Electrical connection Connector, M12 × 1 Protection class IP67 Environmental conditions Ambient temperature -30…+85 °C Storage temperature -50…+100 °C Shock resistance 100 g, 11 ms, half sinusoidal curve, all 6 directions, free fall from 1 m onto concrete (6x) acc. to IEC 68-2-27 Vibration resistance 20 g, 15…2000 Hz, 15…25 Hz with amplitude ± 15 mm, 1 octave/minute in all 3 directions, 50 continuous loads Tests/approvals UL registration number E302799 Reference conditions acc. to IEC 61298-1 Temperature 15…+25 °C Atmospheric pressure 860…1060 hPa abs. Humidity 45…75 % rel. Auxiliary power 24 VDC Temperature behaviour MTTF 1189 years acc. to SN 29500 (Ed. 99) 40 Included in delivery FKM special profile seal (1x) Technical data Type PT250R-2004-I2-H1144 ID 6839130

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|4 PT250R-2004-I2-H1144 | 11/08/2023 00-08 | technical changes reserved Technical data Pressure range Pressure type Relative pressure Pressure range 0…250 bar 0…3625.94 psi 0…25 MPa Admissible overpressure ≤ 750 bar Burst pressure ≥ 1500 bar Response time < 2 ms, typ. 1 ms Long-term stability 0.25 % FS, according to IEC EN 60770-1 Power supply Operating voltage 7…33 VDC Current consumption ≤ 23 mA Short-circuit/reverse polarity protection yes / yes Protection type and class IP67 / III Insulation voltage 750 VDC Outputs Output 1 Analog output Output function Analog output current Analog output Current output 4…20 mA Load ≤ (Supply voltage -7)/20 kΩ Resolution <± 0.1 % FS Accuracy LHR ± 0.3 % FS BSL Accuracy LHR ±0.3 % FS (typical; max. ±0.5 % FS) Temperature behaviour Medium temperature -40…+135 °C Temperature coefficient ± 0.2 % of full scale/10 K Environmental conditions Ambient temperature -30…+85 °C Storage temperature -50…+100 °C Vibration resistance 20 g, 15…2000 Hz, 15…25 Hz with amplitude ± 15 mm, 1 octave/minute in all 3 directions, 50 continuous loads, acc. to IEC 68-2-6 Shock resistance 100 g, 11 ms, half sinusoidal curve, all 6 directions, free fall from 1 m onto concrete (6x) acc. to IEC 68-2-27 Mechanical data Housing material Stainless-steel/Plastic, 1.4404 (AISI 316L)/polyarylamide 50 % GF UL 94 V-0

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|4 PT250R-2004-I2-H1144 | 11/08/2023 00-08 | technical changes reserved Technical data Pressure connection material Stainless steel 1.4404 (AISI 316L) Pressure transducer material Stainless steel 1.4435 (AISI 316L) Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring Wrench size pressure connection / coupling nut Electrical connection Connector, M12 × 1 Max. tightening torque of housing nut 20 Nm Reference conditions acc. to IEC 61298-1 Temperature 15…+25 °C Atmospheric pressure 860…1060 hPa abs. Humidity 45…75 % rel. Auxiliary power 24 VDC Tests/approvals Approvals cULus UL registration number E302799 MTTF 1189 years acc. to SN 29500 (Ed. 99) 40 Included in delivery FKM special profile seal (1x)