6825482

1610025 TURCK | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

Features

■Rectangular transducer front ■Cylindrical housing M18, potted ■Connection via M12 x 1 male ■Teach range adjustable via pushbutton or adapter ■Temperature compensation ■Blind zone: 2.5 cm ■Range: 40 cm ■Resolution: 0.5 mm ■Aperture angle of sonic cone: ±15 ° ■1 × switching output, PNP/NPN ■1 × analog output, 4…20 mA / 0…10 V / additional switching output, PNP/NPN ■NO/NC programmable ■Transmission of process value and parametrization via IO-link Wiring diagram Functional principle Ultrasonic sensors capture a multitude of objects contactlessly and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or non-metallic, firm, liquid or powdery. Even environmental conditions such as spray, dust or rain hardly affect their function.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|6 RU40U-M18ES-LIU2PN8X2T-H1151 | 11/17/2023 11-31 | technical changes reserved Technical data Readiness delay ≤ 300 ms Communication protocol IO-Link Output function NO/NC, PNP/NPN, analog output Output 1 Switching output or IO-Link mode Output 2 Analog output Current output 4…20 mA Load resistance current output ≤ 0.5 kΩ Voltage output 0…10 V Load resistance voltage output ≥ 1 kΩ Switching frequency ≤ 10.4 Hz Hysteresis ≤ 5 mm Voltage drop at Ie ≤ 2.5 V Short-circuit protection yes / Cyclic Reverse polarity protection yes Wire breakage protection yes Setting option Push Button Remote Teach IO-Link IO-Link IO-Link specification V 1.1 IO-Link port type Class A Communication mode COM 2 (38.4 kBaud) Process data width 16 bit Measured value information 15 bit Switchpoint information 1 bit Frame type 2.2 Minimum cycle time 2 ms Function pin 4 IO-Link Function Pin 2 DI Maximum cable length 20 m Profile support Smart Sensor Profile Included in the SIDI GSDML Yes Mechanical data Design Threaded barrel, M18 Radiation direction side Dimensions Ø 18 x 107 mm Housing material Metal, CuZn, Nickel Plated Max. tightening torque of housing nut 20 Nm Transducer material Plastic, Epoxyd resin and PU foam The sonic cone diagram indicates the detection range of the sensor. In accordance with standard EN 60947-5-7, quadratic targets in a range of sizes (20 × 20 mm, 100 × 100 mm) and a round rod with a diameter of 27 mm are used. Important: The detection ranges for other targets may differ from those for standard targets due to the different reflection properties and geometries. Sonic Cone

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|6 RU40U-M18ES-LIU2PN8X2T-H1151 | 11/17/2023 11-31 | technical changes reserved Technical data Electrical connection Connector, M12 × 1, 5-wire Ambient temperature -25…+70 °C Storage temperature -40…+80 °C Pressure resistance 0.5…5 bar Protection class IP67 Switching state LED, Yellow Object detected LED, Green Tests/approvals MTTF 202 years acc. to SN 29500 (Ed. 99) 40 Declaration of conformity EN ISO/IEC EN 60947-5-7 Vibration resistance IEC 60068-2 Approvals CE cULus Mounting instructions Mounting instructions/Description Setting the limit values The ultrasonic sensor can be parameterized in such a way that you can either set a teachable measuring and switching range via an analog and a switching output, or switching ranges via two switching outputs. These settings are done with the Easy-Teach adapter or with the buttons at the sensor. The green and yellow LEDs indicate whether the sensor has detected the object. Various functions such as single switchpoint, window mode or reflection mode to a fixed target can be taught. Further information is described in the operating instructions. How to set the window mode by teaching two limits is described below. These two limits form the switching window and can be selected freely within the detection range. Easy-Teach

• Connect the teach adapter TX1-Q20L60 between the sensor and connection cable
• Position object for the first limit value
• Press and hold the select button for output 1 or 2 for 2 or 8 s against Gnd
• Press and hold the select button for 8 s against Gnd to teach the first limit value
• Position object for the second limit value
• Press and hold button for at least 2 s against Gnd Teach button
• Position object for the first limit value
• Press and hold button 1 to select output 1 or 2 for 2 or 8 s against Gnd
• Press and hold button 1 for at least 8 s

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|6 RU40U-M18ES-LIU2PN8X2T-H1151 | 11/17/2023 11-31 | technical changes reserved

• Position object for the second limit value
• Press and hold button 1 for at least 2 s LED response Successful teaching is indicated by a fast flashing green LED. The sensor then automatically runs in normal operating mode. Unsuccessful teach-in is indicated by the LED flashing alternately green and yellow. In normal operating mode, both LEDs signal the switching state of output 1.
• Green: Object is within the detection range but not in the switching range
• Yellow: Object is within the switching range
• Off: Object is outside the detection range or signal loss Accessories MW-18 6945004 Mounting bracket for threaded barrel sensors; material: Stainless steel A2 1.4301 (AISI 304) Wiring accessories Dimension drawing Type ID RKC4.5T-2/TEL 6625016 Connection cable, M12 female connector, straight, 5-pin, cable length: 2 m, jacket material: PVC, black; cULus approval

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 5|6 RU40U-M18ES-LIU2PN8X2T-H1151 | 11/17/2023 11-31 | technical changes reserved Dimension drawing Type ID WKC4.5T-2/TEL 6625028 Connection cable, M12 female connector, angled, 5-pin, cable length: 2 m, jacket material: PVC, black; cULus approval Accessories Dimension drawing Type ID USB-2-IOL-0002 6825482 IO-Link Master with integrated USB port TX1-Q20L60 6967114 Teach adapter for inductive encoders, linear position, angle, ultrasonic and capacitive sensors

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 6|6 RU40U-M18ES-LIU2PN8X2T-H1151 | 11/17/2023 11-31 | technical changes reserved Dimension drawing Type ID BL67-4IOL 6827386 4-channel IO-Link Master module for the modular BL67 I/O-system BL20-E-4IOL 6827385 IO-Link master module for the modular BL20 I/O system, 4-channel TBEN-S2-4IOL 6814024 Compact multiprotocol I/O module, 4 IO-Link Master 1.1 Class A, 4 universal PNP digital channels 0.5 A