1610094 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

■Smooth sonic transducer face ■Cylindrical housing M18, potted ■Connection via M12 x 1 male ■Temperature compensation ■Blind zone: 2.5 cm ■Range: 40 cm ■Resolution: 0.5 mm ■Aperture angle of sonic cone: ±15 ° ■PNP switching output ■NO/NC programmable ■IO-Link Wiring diagram Functional principle Ultrasonic sensors capture a multitude of objects contactlessly and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or non-metallic, firm, liquid or powdery. Even environmental conditions such as spray, dust or rain hardly affect their function. The sonic cone diagram indicates the detection range of the sensor. In accordance with standard EN 60947-5-2, quadratic targets in a range of sizes (20 × 20 mm, 100 × 100 mm) and a round rod with a diameter of 27 mm are used. Important: The detection ranges for other targets may differ from those for standard targets due to the different reflection properties and geometries.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|5 RU40U-M18M-AP8X2-H1151 | 11/17/2023 11-29 | technical changes reserved Technical data Communication protocol IO-Link Output function NO/NC, PNP Output 1 Switching output or IO-Link mode Switching frequency ≤ 10.4 Hz Hysteresis ≤ 5 mm Voltage drop at Ie ≤ 2.5 V Short-circuit protection yes / Cyclic Reverse polarity protection yes Wire breakage protection yes Setting option Remote Teach IO-Link IO-Link IO-Link specification V 1.1 IO-Link port type Class A Communication mode COM 2 (38.4 kBaud) Process data width 16 bit Measured value information 15 bit Switchpoint information 1 bit Frame type 2.2 Minimum cycle time 2 ms Function pin 4 IO-Link Function Pin 2 DI Maximum cable length 20 m Profile support Smart Sensor Profile Included in the SIDI GSDML Yes Mechanical data Design Threaded barrel, M18 Radiation direction straight Dimensions Ø 18 x 63 mm Housing material Metal, CuZn, Nickel Plated Max. tightening torque of housing nut 20 Nm Transducer material Plastic, Epoxyd resin and PU foam Electrical connection Connector, M12 × 1, 5-wire Ambient temperature -25…+70 °C Storage temperature -40…+80 °C Pressure resistance 0.5…5 bar Protection class IP67 Switching state LED, Yellow Sonic Cone

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|5 RU40U-M18M-AP8X2-H1151 | 11/17/2023 11-29 | technical changes reserved Technical data Object detected LED, Green Tests/approvals MTTF 202 years acc. to SN 29500 (Ed. 99) 40 Declaration of conformity EN ISO/IEC EN 60947-5-2 Vibration resistance IEC 60068-2 Approvals CE cULus Mounting instructions Mounting instructions/Description Setting the switchpoint The ultrasonic sensor features a switching output with a teachable switching point. The green and yellow LEDs indicate whether the sensor has detected the object. One switching point is taught. This must be within the detection range. In this operating mode the background is suppressed. Teach

  • Connect the teach adaptor between the sensor and connection cable
  • Position the object at the beginning of the protection area
  • Press the button for 2 - 7 sec against Ub
  • Place object at the end of the switching range
  • Press the button against Ub for 8 - 11 seconds After a successful teach-in, the green LED flashes at 2Hz and the sensor runs automatically in normal mode. LED response In standard operating mode, the two LEDs indicate the switching state of the sensor.
  • Green: Object within the detection range but not in switching range
  • Yellow: Object is within the switching range
  • Off: Object is outside the detection range or signal loss

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|5 RU40U-M18M-AP8X2-H1151 | 11/17/2023 11-29 | technical changes reserved Accessories MW-18 6945004 Mounting bracket for threaded barrel sensors; material: Stainless steel A2 1.4301 (AISI 304) Wiring accessories Dimension drawing Type ID RKC4.5T-2/TEL 6625016 Connection cable, M12 female connector, straight, 5-pin, cable length: 2 m, jacket material: PVC, black; cULus approval WKC4.5T-2/TEL 6625028 Connection cable, M12 female connector, angled, 5-pin, cable length: 2 m, jacket material: PVC, black; cULus approval Accessories Dimension drawing Type ID TBEN-S2-4IOL 6814024 Compact multiprotocol I/O module, 4 IO-Link Master 1.1 Class A, 4 universal PNP digital channels 0.5 A

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 5|5 RU40U-M18M-AP8X2-H1151 | 11/17/2023 11-29 | technical changes reserved Dimension drawing Type ID USB-2-IOL-0002 6825482 IO-Link Master with integrated USB port VB2-SP1 A3501-29 Teach adapter