6786 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • Environmentally sealed, low profile
  • Normally open or normally closed
  • Pre–set, non–adjustable calibration
  • Single pole, single–throw (SPST)
  • Max resistive load: 7 amp
  • Operating temperature range: -20°F to 350°F (-29°C to 117°C)
  • Ambient temperature range: -65°F to 400°F (-53.9°C to 204.4°C)
  • Many options available including solder type terminals in parallel or opposed alignments, brackets, studs, and with or without surface mounting brackets
  • UL recognized, file #E34618 (Go to UL online certifications directory web page)
  • Canadian-UL (UL File #34618)

30 VAC/DC 125 VAC 250 VAC Life Cycles

5.0 Amperes 2.0 Amperes 1.0 Amperes 100,000 5.5 Amperes 3.0 Amperes 1.5 Amperes 50,000 6.0 Amperes 4.0 Amperes 2.0 Amperes 25,000 6.5 Amperes 5.0 Amperes 2.5 Amperes 10,000 7.0 Amperes 6.0 Amperes 3.0 Amperes 5,000 PERFORMANCE CHARACTERISTICS Contact Ratings (Resistive) Based on standard differential The standard 6786 utilizes silver contacts. Gold plated contacts can be furnished to assure reliable circuit switching under low wattage conditions.

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. Operating Temperature Differential Tolerance °F °C °F °C ±°F ±°C -20 -28.9 30 16.7 10 5.6 0 -17.8 30 16.7 10 5.6 10 -12.2 30 16.7 10 5.6 20 -6.7 20 11.1 8 4.4 30 --1.1 20 11.1 8 4.4 40 4.4 20 11.1 8 4.4 50 10.0 20 11.1 8 4.4 60 15.6 20 11.1 8 4.4 Operating Temperature Differential Tolerance °F °C °F °C ±°F ±°C 70 21.1 20 11.1 8 4.4 80 26.7 20 11.1 8 4.4 90 32.2 20 11.1 8 4.4 100 37.8 20 11.1 8 4.4 110 43.3 20 11.1 8 4.4 120 48.9 20 11.1 8 4.4 130 54.4 20 11.1 8 4.4 140 60.0 20 11.1 8 4.4 Operating Temperature Differential Tolerance °F °C °F °C ±°F ±°C 150 65.6 20 11.1 8 4.4 160 71.1 20 11.1 8 4.4 170 76.7 20 11.1 8 4.4 180 82.2 20 11.1 8 4.4 190 87.8 20 11.1 8 4.4 200 93.3 30 16.7 10 2.8 210 98.9 30 16.7 10 4.4 220 104.4 30 16.7 10 4.4 Characteristics Operating Temperature Switch Action SPST (snap–action) Dielectric Strength 1250 VAC, rms, 60 cycles, terminal to case Vibration Resistance 10–500Hz, 10G, per MIL-STD-202, Method 204, Condition A (unmonitored) Shock Resistance 30G, 11 milliseconds Weight 2.5 grams

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. Operating Temperature Differential Tolerance °F °C °F °C ±°F ±°C 230 65.6 20 11.1 8 4.4 240 71.1 20 11.1 8 4.4 250 76.7 20 11.1 8 4.4 260 82.2 20 11.1 8 4.4 270 87.8 20 11.1 8 4.4 280 93.3 30 16.7 10 2.8 290 98.9 30 16.7 10 4.4 300 104.4 30 16.7 10 4.4 Operating Temperature Differential Tolerance °F °C °F °C ±°F ±°C 230 110.0 30 16.7 10 4.4 240 115.6 30 16.7 10 4.4 250 121.1 30 16.7 10 4.4 260 126.7 30 16.7 10 4.4 270 132.2 30 16.7 10 4.4 280 137.8 30 16.7 10 4.4 290 143.3 30 16.7 10 4.4 300 148.9 30 16.7 10 4.4 Operating Temperature Differential Tolerance °F °C °F °C ±°F ±°C 310 154.4 40 22.2 12 6.7 320 160.0 40 22.2 12 6.7 330 165.6 40 22.2 12 6.7 340 171.1 40 22.2 12 6.7 350 176.7 40 22.2 12 6.7 Operating Temperature (continued)

www.sensata.com Page 4 Copyright © 2018 Sensata Technologies, Inc. CONFIGURATIONS

Rev:10/05/18 www.sensata.com Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 (508)-236-3287 klixon@sensata.com AUTHORIZED DISTRIBUTORS Flame Enterprises Bob Correa, Director of Product Management +1 (240) 236-9802 bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818- 700-2905 Fax: 1-818-407-5080 Peerless Electronics Steve Gunther, National Sales Manager +1 (516) 594-3509 sgunther@peerlesselectronics. com nysales@peerlesselectronics. com | Web Tel: 1-800-285-2121 Fax: 1-800-222-8096 Europe, Middle East & Africa Flame Enterprises Bob Correa, Director of Product Management +1 (240) 236-9802 bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818- 700-2905 Fax: 1-818-407-5080 CONTACT US AGENCY APPROVALS & CERTIFICATIONS WARNINGS UL recognized, file #E34618 Canadian-UL (UL File #34618) RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury.