6765

6765_18 SCHURTER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Power entry modules without line filter 6765https://www.schurter.com /PG05 Connectors IEC Appliance Inlet C14 or C18 with Line Switch 2 pole and Fuseholder 1- or 2-pole See below: Approvals and Compliances C14 70° C C18 70° C

Description

• Panel mount : Screw-on version from front or rear side , Appliance Inlet , protection class I or II , Fuseholder for fuse-links 5 x 20 mm , Line Switch 2-pole - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. - Solder terminals or quick connect terminals Characteristics - Line switch non-illuminated or illuminated References Alternative: version with line filter FKID Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz Ratings UL/CSA 10 A / 250 VAC; 60 Hz Dielectric Strength > 1.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- rature -25 °C to 70 °C IP-Protection from front side IP 20 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal Solder terminals or quick connect ter- minals Material: Housing PA6, black, UL 94V-0 appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Fuseholder 1 or 2 pole, acc. to IEC 60127-6, for fuse-links 5 x 20 mm Power Acceptance @ Ta > 23°C Admissible power acceptance at higher ambient temperature see derating cur- ves Line Switch Rocker switch 2-pole, non-illuminated or illuminated black, acc. to IEC 61058-1 Technical Details Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6765 Approval Logo Certificates Certification Body Description SEMKO Approvals SEMKO Certificate Number: SE/09137-1A UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 27324 Product standards Product standards that are referenced

Power entry modules without line filter6765 https://www.schurter.com /PG05 Connectors Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Dimensions [mm] 27.250 21.52 7 +0.2 - 0 58.2 +0.2 - 0 R 3 ø 3.2 R 3 Length of the terminal please find at the order code configuration table

Power entry modules without line filter 6765https://www.schurter.com /PG05 Connectors Derating Curves 1-pole Admissible power acceptance in Watt 02 04 06 08 0 100 I = << In I = 0.7 In I = 1.0 In 2.0 1.5 1.0 0.5 0.0 Ambient air temperature Ta °C 2-pole Admissible power acceptance in Watt per pole 02 04 06 08 0 100 0.2 0.0 I = << In I = 0.7 In I = 1.0 In 1.6 0.6 0.4 0.8 1.2 1.0 1.4 Ambient air temperature Ta °C Config. Code The characters are placeholders for the correspondingly keys of selections from the key tables. Type Configuration key protection class II B protection class I X Terminal L Configuration key connection to fuse holder B 6765 Terminal N Configuration key short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 connection to fuse holder B Symbols similar as in table A 6765 Terminal Ground Configuration key without terminal 0 short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 6765 Terminal Fuseholder Configuration key solder terminal 1 6765 Color Configuration key Black A 6765 Style Configuration key flange with countersunk holes 1 6765 Dimension "S" Configuration key The dimension "S" is displayed in (1/10 mm). This information is also valid for the order code 6765 Features Configuration key dead cover 1 holder for 1 or 2 fuses (text legible, when inlet on top) 4 holder for 1 or 2 fuses (text legible, when inlet on bottom) 5 6765 Switches Configuration key not used 0

Power entry modules without line filter6765 https://www.schurter.com /PG05 Connectors Switches Configuration key dead cover 1 bipolar switch, 4,8mm blade terminal, black rocker 4 bipolar switch, solder terminals, black rocker 5 bipolar switch, 4,8mm blade terminal, rocker red illuminated 6 Switches Configuration key bipolar switch, solder terminal, rocker red illuminated 7 bipolar switch, 4,8mm blade terminals, rocker green illuminated 8 bipolar switch, solder terminals, rocker green illuminated 9 All Variants Type Terminal L Terminal N Terminal Ground Features Switches Config. Code V-Lock Order Number protection class I connection to fuse holder connection to fuse holder short solder termi- nal (L = 4.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) not used 6765-X-BB21-A-10040 4304.6078 protection class I connection to fuse holder connection to fuse holder short solder termi- nal (L = 4.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6765-X-BB21-A-10044 4304.6079 protection class I connection to fuse holder connection to fuse holder short solder termi- nal (L = 4.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, solder terminals, black rocker 6765-X-BB21-A-10045 4304.6080 protection class I connection to fuse holder connection to fuse holder short solder termi- nal (L = 4.8 mm) holder for 1 or 2 fuses (text legible, when inlet on bottom) bipolar switch, 4,8mm blade terminal, black rocker 6765-X-BB21-A-10054 4304.6081 protection class I connection to fuse holder connection to fuse holder short solder termi- nal (L = 4.8 mm) holder for 1 or 2 fuses (text legible, when inlet on bottom) bipolar switch, solder terminals, black rocker 6765-X-BB21-A-10055 4304.6082 protection class I connection to fuse holder connection to fuse holder Blade terminal (4.8 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) not used 6765-X-BB81-A-10040 4304.6085 protection class I connection to fuse holder connection to fuse holder Blade terminal (4.8 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6765-X-BB81-A-10044 4304.6087 protection class I connection to fuse holder connection to fuse holder Blade terminal (4.8 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, rocker red illuminated 6765-X-BB81-A-10046 4304.6088 protection class I connection to fuse holder connection to fuse holder Blade terminal (4.8 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminals, rocker green illuminated 6765-X-BB81-A-10048 4304.6089 protection class I connection to fuse holder connection to fuse holder Blade terminal (4.8 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on bottom) bipolar switch, 4,8mm blade terminal, black rocker 6765-X-BB81-A-10054 4304.6090 protection class I connection to fuse holder connection to fuse holder Blade terminal (4.8 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on bottom) bipolar switch, 4,8mm blade terminals, rocker green illuminated 6765-X-BB81-A-10058 4304.6091 protection class I connection to fuse holder connection to fuse holder Blade terminal (6.3 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6765-X-BB91-A-10044 4304.6092 protection class I connection to fuse holder connection to fuse holder Blade terminal (6.3 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, solder terminals, black rocker 6765-X-BB91-A-10045 4304.6093 protection class I connection to fuse holder connection to fuse holder Blade terminal (6.3 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, rocker red illuminated 6765-X-BB91-A-10046 4304.6094 protection class I connection to fuse holder connection to fuse holder Blade terminal (6.3 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on bottom) bipolar switch, 4,8mm blade terminal, black rocker 6765-X-BB91-A-10054 4304.6095 protection class I connection to fuse holder connection to fuse holder without terminal holder for 1 or 2 fuses (text legible, when inlet on top) not used 6765-X-BB01-A-10040 4304.6122 protection class I connection to fuse holder connection to fuse holder Blade terminal (6.3 x 0.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminals, rocker green illuminated 6765-X-BB91-A-10048 4304.6153 protection class I connection to fuse holder connection to fuse holder short solder termi- nal (L = 4.8 mm) holder for 1 or 2 fuses (text legible, when inlet on bottom) not used 6765-X-BB21-A-10050 4304.6203 protection class I connection to fuse holder connection to fuse holder short solder termi- nal (L = 4.8 mm) holder for 1 or 2 fuses (text legible, when inlet on top) bipolar switch, 4,8mm blade terminals, rocker green illuminated 6765-X-BB21-A-10048 4304.6215 The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

Power entry modules without line filter 6765https://www.schurter.com /PG05 Connectors Packaging unit 50 Pcs Accessories Wire harness for SCHURTER products Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Connector Overview complete

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 IEC Connector C15 for hot conditions 120°C, Rewireable, Straight 4781 IEC Connector C15 for hot conditions 120°C, Rewireable, Angled 4784 Connector further types to 6765 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to 6765 Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to 6765 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to 6765

Power entry modules without line filter6765 https://www.schurter.com /PG05 Connectors Mating Outlets/Connectors shuttered Power Cord Overview complete Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 6765 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 11.09.2018