6752A POMONA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • True 75 Ω. Designed for common cable types.
  • Precision machined. Gold plated (15 micro– inches) contacts.
  • Insulation material is PTFE (not delrin). Materials
  • Body is machined brass with tarnish resistant nickel plating. USA: Sales: 800-490-2361 Technical Support: 800-241- All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
  • Male center pin contact is gold-plated (15 micro- inches) brass.
  • Body made from precision machined high-quality brass (not die cast).
  • High quality machined PTFE dielectric.

Ordering Information

Model: 6752A Specifications Nominal impedance 75 Ω Frequency 0-3 GHz VSWR 1.10 max. 0-1 GHz 1.35 max. 1-3 GHz Center / Outer contact resistance 1.5 / 1.0 mΩ Number of insertions 500 Dielectric withstand voltage 1500 Vrms Ratings: Voltage: 500 Vrms Operating Temperature: -85 ˚F to + 329 ˚F (-65 ˚C to +165 ˚C) Max.

2060 Fax: 888-403-3360

Europe: 31-(0) 40 2675 150 International: 425-446-5500 e-mail: technicalsupport@pomonatest.com Where to Buy: www.pomonaelectronics.com .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2004 11/2004 2416402 D-ENG-N Rev A Page 1 of 2

BNC (M) Crimp Type, RG 59, 59A, 59B, 62, 210 75 Ω Connector Assembly Instructions Europe: 31-(0) 40 2675 150 International: 425-446-5500 e-mail: technicalsupport@pomonatest.com Where to Buy: www.pomonaelectronics.com .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2004 11/2004 2416402 D-ENG-N Rev A Page 2 of 2 USA: Sales: 800-490-2361 Technical Support: 800-241- All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),