664_12 BITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
1 Specifications subject to change without notice. 2 E96 codes available. BI Technologies Corporation
4200 Bonita Place
Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 1 of 3 BI technologies Precision Nichrome Resistors on Ceramic Passivation coating provides protection in humid environments Excellent frequency response Excellent long term resistance stability Industry Standard Packaging JEDEC 95, MS-012 (SOIC narrow body in 8, 14 and 16 lead pin counts) Ratio Tolerances < ± 0.05% TCR Tracking Tolerances < ± 5 ppm/° C Standard Resistance Range2 1K ohms to 100K ohms (Isolated) 1K ohms to 20K ohms (Bussed) TCR ± 25 ppm/° C TCR Tracking ± 5 ppm/° C Operating Temperature Range -55°C to +125°C Interlead Capacitance < 2pF Insulation Resistance 10,000 Megohms Maximum Operating Voltage 100 Vdc or PR Noise, Maximum (MIL-STD-202, Method 308) -40 dB Resistor Power Rating at 70° C 0.1 Watts 1 Specifications subject to change without notice. 2 E96 codes available.
BI Technologies Corporation Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 2 of 3 BI technologies Model Package Power @ 70°°°°C(watts) 3 664 0.4 667 0.5 668 0.5 Thermal Shock plus Power Conditioning ∆R 0.25% Short Time Overload ∆R 0.1% Terminal Strength ∆R 0.1% Moisture Resistance ∆R 0.2% Mechanical Shock ∆R 0.25% Vibration ∆R 0.25% Low Temperature Operation ∆R 0.1% High Temperature Exposure ∆R 0.1% Load Life, 1,000 Hours ∆R 0.1% Resistance to Solder Heat ∆R 0.1% Dielectric Withstanding Voltage 100V for 1 minute Temperature Exposure, Maximum 215°C for 3 minutes Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range -65°C to +125°C Lead Plating 80/20 Tin Lead (Standard) 100 matte Tin (RoHS) Lead Material Copper Alloy Lead Configuration Gull Wing Lead Coplanarity 0.004” (0.102 mm) Substrate Material Alumina Resistor Material Passivated Nichrome Body Material Molded Epoxy
3 Maximum power per resistor @ 70° C is 100 mW, not to exceed package power
Nichrome Resistor Networks on Ceramic Substrates Models 664, 667, 668 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 01.12 Model Package Power @ 70°C(watts)3 664 0.4 667 0.5 668 0.5 Package Power And Derating Curve Thermal Shock plus Power Conditioning ΔR 0.25% Short Time Overload ΔR 0.1% Terminal Strength ΔR 0.1% Moisture Resistance ΔR 0.2% Mechanical Shock ΔR 0.25% Vibration ΔR 0.25% Low Temperature Operation ΔR 0.1% High Temperature Exposure ΔR 0.1% Load Life, 1,000 Hours ΔR 0.1% Resistance to Solder Heat ΔR 0.1% Dielectric Withstanding Voltage 100V for 1 minute Temperature Exposure, Maximum 215°C for 3 minutes Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range -65°C to +125°C Lead Plating 100 matte Tin (RoHS) Lead Material Copper Alloy Lead Configuration Gull Wing Lead Coplanarity 0.004” (0.102 mm) Substrate Material Alumina Resistor Material Passivated Nichrome Body Material Molded Epoxy Environmental (Mil-R-83401) Mechanical
3 Maximum power per resistor @ 70°C is 100 mW, not to exceed package power
Nichrome Resistor Networks on Ceramic Substrates Models 664, 667, 668 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 01.12 Typical Marking Ordering Information4 66 4 -A- 1002 A LF 7 Model Series: 66 = Passivated Nichrome on Ceramic Number of Leads: 4= 8 leads 7=14 leads 8=16 leads Circuit Type: A=Isolated B=Bussed Packaging Option: 7=7” Tape & Reel 13 = 13” Tape & Reel (No Code used for Tubes) Lead Finish: LF=Lead Free (RoHS) Tolerance Code Resistance Code Accuracy Code at 25°C A B D F Absolute Resistance Tolerances (%) ± 0.1 ± 0.1 ± 0.5 ± 1.0 Ratio Tolerances (R1 Ref) (%) ± 0.05 ± 0.1 ± 0.1 ± 0.5 Temperature Coefficient of Resistance (ppm/°C) ±25 Temperature Coefficient of Resistance, Tracking (ppm/°C) ±5 Model + Pin count Tubes 7” Tape & Reel 13” Tape & Reel 664 100 1000 2500 667 50 500 2500 668 50 500 2500 Resistance Code4 Resistance Tolerance Code Packaging Options (Unit Count/Package Type) First 3 digits are significant. Fourth digit denotes number of trailing zeros. For values less than 100, use “R” to denote a decimal point. Example, 51 and 10000 ohms are coded as 51R0 and 1002 respectively. Standard values follow E96. 4 Contact customer service for custom designs and features. BI Technologies Corporation Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 3 of 3 BI technologies First 3 digits are significant. Fourth digit denotes number of trailing zeros. For values less than 100, use “R” to denote a decimal point. Example, 51 and 10000 ohms are coded as 51R0 and 1002 respectively. Standard values follow E96. Accuracy Code at 25° C A B D F Absolute Resistance Tolerances (%) ± 0.1 ± 0.1 ± 0.5 ± 1.0 Ratio Tolerances (R1 Ref) (%) ± 0.05 ± 0.1 ± 0.1 ± 0.5 Temperature Coefficient of Resistance (ppm/°C) ±25 Temperature Coefficient of Resistance, Tracking (ppm/°C) ±5 Model + Pin count Tubes 7” Tape & Reel 13” Tape & Reel 664 100 1000 2500 667 50 500 2500 668 50 500 2500 4 Contact customer service for custom designs and features. 66 4 -A-1002 A LF 7 Model Series: 66 = Passivated Nichrome on Ceramic Number of Leads: 4= 8 leads 7=14 leads 8=16 leads Circuit Type: A=Isolated B=Bussed Packaging Option: 7=7” Tape & Reel 13 = 13" Tape & Reel (No Code used for Tubes) Lead Finish: No Code=SnPb LF=Lead Free (RoHS) Tolerance Code Resistance Code Lot number printed on backside of 664