66106-7

3-66104-0 MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Note: All part numbers are RoHS compliant. Signal Contacts Material and Finish — See chart. Contact Body—Brass or phosphor bronze Retention Spring—Stainless steel Application Tooling—Page 29 Technical Documents 108-10042 Product Specification Type III+, Crimp, Snap-In Pin Socket [.0625+.0010 –.0020 [1.588 +0.025 ]–0.051 Dia. Max. Dia. Pin Body Spring, Stainless Steel Spring, Stainless Steel Ferrule, Brass, Nickel Flash .530±.010 [13.46±0.25] .113 [2.87] .390 [9.91] Min. Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ Wire Size Ins. Contact Strip Form Loose Piece Tooling Part No. Range Dia. Finish Contact No. Contact No. Loose Piece Strip Form AWG mm2 Range Pin Socket Pin Socket Hand Tool Applicators .015-.030 Gold/Nickel2 788085-3 788088-2 — — 567867-1* 90716-1 or 567947-1* or 680602-□* Bright Tin 1-66425-2 1-66424-1 — —.040-.0601 Gold/Nickel2 66425-7 66424-7 66429-3 66428-3 91515-1 6 466598-□* .014-.0301 Gold/Nickel2 66393-7 66394-7 — — 0.36-0.76 Sel. Gold/Nickel3 66393-8 66394-8 66406-4 66405-4 90225-26 466585-3* Bright Tin 1-66106-5 1-66108-5 1-66107-1 1-66109-7 91515-16 466321-□*** 26-24 0.12-0.2 .035-.0551 Gold/Nickel2 66106-7 66108-7 66107-3 66109-3 or or 0.89-1.40 Sel. Gold/Nickel3 66106-8 66108-8 66107-4 66109-4 58495-1* 466908-2*Sel. Gold/Nickel4 — 66108-1 — 66109-1 Bright Tin 2-66102-5 3-66104-0 1-66103-8 1-66105-9 .040-.0801 Gold/Nickel2 66102-8 66104-8 66103-3 66105-3 91515-1 6 466323-□* 1.02-2.03 Sel. Gold/Nickel3 66102-9 66104-9 66103-4 66105-4 or or Sel. Gold/Nickel4 — 66104-1 — 66105-1 24-20 0.2-0.6 .060-.120 5 Bright Tin 1-66564-2 1-66563-1 66566-7 66565-7 466383-4* 1.52-3.05 Sel. Gold/Nickel 3 66564-8 66563-8 66566-4 66565-4 91542-16 or 466979-1* or 567363-□* Bright Tin 1-66332-4 1-66331-4 1-66400-0 1-66399-0 1-66098-9S Bright Tin 1-66098-8 1-66100-9 1-66099-5 1-66101-9 91505-16 or 466325- □* Gold/Nickel2 66098-8 66100-8 66099-3 66101-3 91523-1 6 or or2.03-2.54 Sel. Gold/Nickel3 66098-9 66100-9 66099-4 66101-4 58495-1* 466906-1* Sel. Gold/Nickel4 66098-6 — 66099-1 — Bright Tin 1-66359-4 1-66358-6 1-66361-2 1-66360-2 .080-.1001 Phos Bronze 1-66359-5 1-66358-8 1-66359-5 1-66358-8 466326-□*Gold/Nickel2 66359-9 66358-9 66361-3 66360-3 91519-16 or2.03-2.54 Sel. Gold/Nickel3 1-66359-0 1-66358-0 66361-4 66360-4 466923-2*18-14 0.8-2.0 1-66359-2 1-66358-3 66361-8 66360-8 Sel. Gold/Nickel4 — 66358-1 — 66360-1 .110-.150 5 Bright Tin 66597-8 66598-9 66602-8 66601-9 466958-1* 1-66598-0 91521-1 6 or2.79-3.81 Sel. Gold/Nickel3 66597-2 66598-2 66602-2 66601-2 567364-□*** 1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2.000015 [0.00038] gold in the mating area over .000050 [0.00127] min. nickel. 3.000030 [0.00076] gold in the mating area, with gold flash on remain- der, over .000050 [0.00127] min. nickel. 4.000030 [0.00076] gold in the mating area, with gold gradient on remainder, over .000050 [0.00127] min. nickel. 5Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr. 23- 24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors. 6To use with the 626 Pneumatic Tool: remove crimping head from Straight Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1, Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated). 7Phosphor Bronze SStandard reeling of strip form contacts. *Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with 626 Pneumatic Tool System. Insertion Tool Part No. 91002-1 (for insulation diameters .070 [1.78] Extraction Tool Part No. 305183. (Instruction Sheet 408-1216) There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. *Call Technical Support for Machine Applicator Part Numbers. Socket Pin ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability information on page 8.

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Material Contact Body and Tab—Brass Retention Spring—Stainless steel Finish See chart on Page 11. Pin Solder-Type (with Preformed Wire Barrel/Insulation Support) Socket Socket Type III+, Solder Versions Spring, Stainless Steel Localized Plate Area Pin Body, Brass 1.085 [27.56] Max. .825 [20.96] Max. 3.90 [9.91] Min. .200 [5.08] Min. .0625+.0010 .0625 –.0020 [1.588+.0254 ] Dia. [1.588 –.0508 .530±.010 [13.46±0.25] Signal Contacts (Continued) Type III+, Crimp, Snap-In Contact Size—16 Pin Diameter—.062 [1.57] Material and Finish Contact Body—Copper alloy, plated tin or gold Spring—Stainless steel Wire Size Range Ins. Grounding Pin Part No. Strip Form Loose Piece Dia. Contact Applicator Hand Tool [mm2] AWG Range1 Finish Strip Form Loose Piece Part No. Part No. .045-.070 Tin 164160-3 164163-1 466323-□* 91515-13 or .078-.098 Tin 164161-3 164164-1 466741- □*** 91523-1 3 or 1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 3To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call Technical Support at 800-522-6752), Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuat- ed) or 189722-1 (foot actuated). *Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System. There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. *Call Technical Support at 1-800-522-6752 for Automatic Machine Applicator Part Numbers. Extraction Tool Part No. 725840-1 Note: All part numbers are RoHS compliant. Grounding Pin (make first - break last) Related Product Data Application Tooling—Pages 29, 30 Technical Documents—Page 4 Pin

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Note: All part numbers are RoHS compliant except: /lozenge6Indicates non-RoHS compliant. Material Contact Body and Tab—Brass Retention Spring—Stainless steel Finish See chart. Pin Pin Solder Tab Socket Socket Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ Wire Size Loose Piece Range Contact Contact No. AWG [mm 2] Finish Pin Socket 26-20 0.12-0.6 Gold/Nickel1 266182-1/lozenge6266183-1/lozenge6 18-16 0.8-1.4 Gold/Nickel 1 266180-1/lozenge6266181-1/lozenge6 Solder Duplex2 202236-7/lozenge6202237-7/lozenge6 Tab Bright Tin 202236-5 /lozenge6202237-5/lozenge6 2Duplex plated .000030 [0.00076] gold in mating area over .000050 [0.00127] nickel on contact body; bright tin-lead on solder tab. 3Bright tin on entire contact. Note: These contacts can be used in Multimate contact cavities of all connector housings. ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability information on page 3. Extraction Tool Part No. 305183 (Instruction Sheet 408-1216) Type III+, Solder Versions (Continued) Spring, Stainless Steel Pin Body, Brass Localized Plate Area Spring Stainless Steel Ferrule, Brass, Nickel Flash Body Brass Solder Post Brass .390 [9.91] Min. 1.112 [28.24] Max. .365 [9.27] Max. .365 [9.27] Max. .020 [0.51] .058 [1.47] .105 [2.67] .865 [21.97] .120 [3.05] .200 [5.08] Min. .794±.010 [20.17±0.25] .530±.010 [13.46±0.25] .0625+.0010 .0625 –.0020 [1.588+.0254 [1.588 –.0508 Signal Contacts (Continued)

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Signal Contacts (Continued) Material Contact Body and Post—Brass Retention Spring—Stainless steel Finish See chart. Pin Pin Socket Socket Type III+, Posted (Replacement Contacts, See Note Below) Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ Loose Piece Contact No. Termination Post Contact 3 Termination High Post 2 Termination High Post 1 Termination High PostMethod Configuration Finish Pin Socket Pin Socket Pin Socket .025 x .025 Sel. Gold/Nickel1 6-66460-4 6-66461-3 6-66460-3 6-66461-2 6-66460-2 5-66461-5 0.64 x 0.64 Bright Tin 6-66460-6 5-66461-9 6-66460-7 5-66461-8 6-66460-5 5-66461-4 .045 x .045 Sel. Gold/Nickel1 1-66471-5 2-66473-0 — — 1-66471-8 1-66473-9Wrap-Type 1.14 x 1.14 Bright Tin 1-66471-7 1-66473-8 — — 1-66471-6 1-66473-7 on socket O.D. Posts plated tin-lead over copper. Extraction Tool Part No. 305183 (Instruction Sheet 408-1216) Insertion Tool Part No. 200893-2 Note: These contacts are used as replacement contacts for all posted connectors. ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability information on page 3. Note: All part numbers are RoHS compliant. .062 [1.58] Dia. Ref. .525 [13.34] .025±.001 [0.64±0.03] Point of Gold Plating Thk. Measurement Body Brass Post Brass Spring Stainless Steel .025 [0.64] .100 [2.54]

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Signal Contacts (Continued) Material and Finish — See chart. Contact Body—Copper Nickel Alloy Retention Spring—Stainless steel Related Product Data Application Tooling — Pages 75-78 Technical Documents 108-10024-2 Product Specification Enhanced High Current Type III+, Crimp, Snap-In Ratings Multiplication Rating Factor (F) Pin Socket [.0625+.0010 –.0020 [1.588 +0.025 ]–0.051 Dia. Max. Dia. Pin Body Spring, Stainless Steel Spring, Stainless Steel Ferrule, Brass, Nickel Flash .530±.010 [13.46±0.25] .113 [2.87] .390 [9.91] Min. Contact Size 16—Pin Diameter .062 [1.57] Wire Size Ins. Contact Strip Form Loose Piece Tooling Part No. Range Dia. Finish Contact No. Contact No. Loose Piece Strip Form AWG mm 2 Range Pin Socket Pin Socket Hand Tool Applicators 466326-□*.080-.1001 Gold 1-66359-6 1-66358-9 1-66361-4 1-66360-4 91519-13 or 18-14 0.8-2.0 2.03-2.54 Tin 1-66359-9 2-66358-1 1-66361-6 1-66360-6 466923-2* .110-.1502 Gold 1-66597-0 1-66598-1 66602-9 1-66601-0 466958-1* 2.79-3.81 Tin 1-66597-1 1-66598-2 1-66602-0 1-66601-2 91521-13 or 567364-□* Socket Pin 1 Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2 Contacts can ONLY be used in CPC, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors. 3 To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. 217201-1, Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated). There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. *** Call Technical Support for Automatic Machine Applicator Part Numbers. Note: All part numbers are RoHS compliant. Voltage: 250 Volts AC/DC

600 Volts AC/DC, Series I, VDE tested and select loaded only

Base Current: Type III+ contacts: 17 amperes, 30˚C temperature rise with single contact on 14 AWG wire Enhanced High Current Type III+contacts: 25 amperes, 30˚C temperature rise with single contact on 14 AWG wire Temperature: -55˚C to +105˚C VDE 0627: XA/630/4KV/2 - Series I, VDE tested only Type III+ Contacts (Note: 1 = 17 amperes) Single Circuit ≅ 50% 100% Shell Size Wire Size Wire Size Wire Size

30 AWG 14 AWG 30 AWG 14 AWG 30 AWG 14 AWG

Enhanced High Current Type III+ Contacts (14 AWG wire only - Note: 1 = 25 amperes) Single Circuit ≅ 50% 100%Shell Size

14 AWG 14 AWG 14 AWG

11-4 .880 .840 .640 13-9 .880 .640 .480 17-16 .880 .520 .400 23-24 .880 .520 .400 23-37 .880 .440 .320 Percent Connector Loading Percent Connector Loading Enhanced High Current Contacts & M Series Connectors: (Note: 1 = 24 amperes) Single Circuit ≅ 50% ≅ 100% 1 .292 .250 Enhanced High Current Contacts & Metrimate Connectors: (Note: 1 = 24 amperes) Single Circuit ≅ 50% ≅ 100% 1 .458 .375

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Signal Contacts (Continued) Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ Tooling Part No.** Wire Size Ins. Tape Mounted Loose Piece Contact Tape Mounted Loose PieceRange Dia. Contact No.2 Contact No. Color Dies for Die Set for HandAWG mm 2 Range1 Pin Socket Pin Socket Code AMP-TAPETRONIC 626 Pneumatic ToolMachine 69875 Tool System .035-.055 —0.89-1.40 201611-4 201611-14 201613-15 Red/Red 91538-1* .048-.065 —— 90230-17 or 601967-1*28-24 0.08-0.20 1.22-1.65 201334-14 201332-15 Red/Red 90249-2 2.41-2.79 202410-14 202411-15 Green or 601967-1*1.40-2.16 201330-6 201328-9 201330-1 4 201328-15 Yellow/Red (Two) (Two) Support 202725-14 202726-14 Blue — 90231-2 7 or 601967-1* 2.03-2.67 202507-14 202508-15 — — or 601967-1* 18-16 0.8-1.4 200336-6 200333-8 200336-14 200333-14 Blue/Blue 90250-1 90231-27 91539-1* No Ins. — — — — — 58541-1*Support ,6204219-15,6 Blue/Blue or 601967-1* 3212618-23 — 212618-13,6,† — Violet/Blue 90250-1 90231-27 91539-1- No Ins. 201570-2 201568-3 201568-15 — — 58541-1*14 2 Support 201570-14 Violet/Blue or 601967-1* 1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2For AMP-TAPETRONIC Machine No. 69875, order contacts by Tape Mounted Contact No., plus packaging code “IM REEL” (5000 parts per reel). 3Grounding pin is used to provide a make-first/break-last condition when mating and unmating connector halves. 4Use turret TH502 (1-601967-6) with hand tool 601967-1. 5Use turret TH501 (1-601967-5) with hand tool 601967-1. 7Die Set requires “C” Head Adapter Part No. 318161-1; Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without); and Power Unit Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated). *Commercial PRO-CRIMPER II Hand Tool for field repair use only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System. **There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. †Does not use Hand Tool 91539-1 or 601967-1. ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability informa- tion on page 8. Insertion Tool Part No. 200893-2 (for insulation diameters .070 [1.78] or less). Extraction Tool Part No. 305183. Note: All part numbers are RoHS compliant. Type II, Screw Machined, Crimp Material Contact Body—Brass Retention Spring—Stainless steel Finish Contact Body—. 000030 [0.00076] gold over .000050 [0.00127] nickel. Gold thickness controlled on socket O.D. Retention Spring— Stainless steel Related Product Data Application Tooling—Pages 75-78 Pin Pin Socket Socket .795±.010 [20.19±0.25] .472±.005 [11.99±0.13] .062±.001 [1.57±0.03] Dia. Spring Spring Socket Body Pin Body.107 Max. Dia.[2.72] 1.087±.010 [27.61±0.25]

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Signal Contacts (Continued) Material Pin Body—Brass Socket—Phosphor bronze Contact Finish A—Select gold flash over nickel on entire contact, with additional .000030 [0.00076] gold on mating end B—Duplex plated .000030 [0.00076] gold on mating end, tin on termination end, with entire con- tact nickel underplated C—Gold flash over nickel on entire contact D—Duplex plated gold flash on mating end, tin on termination end, with entire contact nickel underplated Insertion/Extraction Tool Part No. 91285-1 Instruction Sheet—408-9404 This tool includes interchangeable tips to Insert/Extract: Size 22, 28-22 AWG [0.08-0.03mm2] Crimp Contacts Size 20, 28-20 AWG [0.08-0.6mm2] Crimp and Solder Cup Contacts Size 20, Posted Contacts Pin Socket Socket Size 20 DF, Crimp, Snap-In Contact Size—20 Pin Diameter—.040 [1.02] *See Product Spec 108-40005 .085 [2.16] Dia. Max. .085 [2.16] Dia. Max. .390 [9.91] .370 [9.34] .555 [14.1] .575 [14.61] [.0400±.0015 [1.02±0.034] Dia. Localized Gold Plate Area Localized Gold Plate Area .150 [3.81] .055 [1.40] Min. Contact Part Nos. Tooling ColorWire Ins. Contact Pin Socket CodeSize Dia. Finish Strip Form Hand (LooseRange Max. Code Strip Form Loose Piece Strip Form Loose Piece Applicator†† Tool Piece) A 66507-3 /lozenge666507-9/lozenge666505-3/lozenge666505-9/lozenge6 .040 B 1658540-1 /lozenge61658540-5/lozenge61658538-2/lozenge6— 466423-□†† /lozenge6Blue 28-24 1.02 C 66507-4 /lozenge61-66507-0/lozenge666505-4/lozenge61-66505-0/lozenge6or 466901-1††/lozenge691503-1†/lozenge6Dot AWG D 1658540-5/lozenge61658540-2/lozenge61658538-3/lozenge61658538-1/lozenge6 or 1016015-1††/lozenge6 [0.08-0.2 A 66682-2 /lozenge666682-4/lozenge666683-2/lozenge666683-4/lozenge6466758-2††/lozenge6mm2] .060 B 5066682-9/lozenge6— 1-5066683-0/lozenge6— or 466963-1††/lozenge691549-1†/lozenge6Black 1.52 D 5066682-6/lozenge6— 5066683-7/lozenge6— or 567804-1††/lozenge6Dot 26-22 A 745254-2 /lozenge6745254-6/lozenge6745253-2/lozenge6745253-6/lozenge6 AWG .050 B 1658544-2 /lozenge61658544-1/lozenge61658543-2/lozenge61658543-1/lozenge6466968-1††/lozenge6Yellow [0.12-0.4 1.27 C 745254-3 /lozenge6745254-7/lozenge6745253-3/lozenge6745253-7/lozenge6or 567036-□††/lozenge691525-1†/lozenge6Dot mm2] D 1658544-3 /lozenge6— 1658543-3 /lozenge6— or 567849-1††/lozenge6 24-20 A 66506-3 /lozenge666506-9/lozenge666504-3/lozenge666504-9/lozenge6466422-□††/lozenge6 AWG .060 B 1658539-1/lozenge61658539-3/lozenge61658537-3/lozenge61658537-4/lozenge6or 466900-1††/lozenge6Red [0.2-0.6 1.52 C 66506-4 /lozenge61-66506-0/lozenge666504-4/lozenge61-66504-0/lozenge6or 567801-1††/lozenge691503-1†/lozenge6Dot mm2] D 1658539-2/lozenge61658539-4/lozenge61658537-1/lozenge61658537-2/lozenge6or 1016002-1††/lozenge6 †To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call Technical Support at 800-522-6752), Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1(hand actuated) or 189722-1 (foot actuated). ††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines, contact Technical Support: 1-800-522-6752. Note: Commercial PRO-CRIMPER II Maintenance and Repair Hand Tool for Wire Size 28-24 AWG [0.08-0.2mm2] Note: Die Set Part No. 58448-3 can be adapted for use with the 626 Pneumatic Tool System. There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. Note: All part numbers are RoHS compliant except: /lozenge6Indicates non-RoHS compliant. Pin With Insulation Support

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Signal Contacts (Continued) Without Insulation Support Pin Pin Socket Socket ColorWire Contact Contact Part Nos. Tooling CodeSize Ins. Dia. Finish Pin Socket Strip Form Hand (LooseRange Max. Code Strip Form Loose Piece Strip Form Loose Piece Applicator Tool Piece) 28-24 AWG .068 A 205310-2 /lozenge6— 205311-3 /lozenge6— [0.08-0.2 1.73 C — — —— †† —— mm2] 24-20 AWG .068 A 205202-2 /lozenge6— 205201-3 /lozenge6205201-5/lozenge6 Red [0.2-0.6 1.73 C 205202-6 /lozenge6205202-7/lozenge6205201-6/lozenge6205201-7/lozenge6 †† 91548-1/lozenge6Dot mm2] 22-18 A 745229-2 /lozenge6745229-4/lozenge6745230-2/lozenge6745230-4/lozenge6 AWG .068 B 1-745229-1 /lozenge6— 1-745230-1 /lozenge61-745230-3/lozenge6 Green [0.4-0.8 1.73 C 745229-5/lozenge6745229-7/lozenge6745230-5/lozenge6745230-7/lozenge6 †† 91513-1/lozenge6Dot mm2] D — — 745230-8 /lozenge6— .085 [2.16] Dia. Max. .390 [9.91] .550 [14.0] .100 [2.54]Point of Measurement .530 [13.46] .085 [2.16] Dia. Max. .0400±.0015 [1.02±0.034] Dia. .150 [3.81] Localized Gold Plate Area Size 20 DF, Crimp, Snap-In (Continued) ††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines, contact Technical Support: 1-800-522-6752. Note: Wire insulation diameter is limited by the connector housing cavity and clearance for the insertion/extraction tool. There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. Note: All part numbers are RoHS compliant except: /lozenge6Indicates non-RoHS compliant.

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com AMP Precision Pin and Socket Contacts Note: All part numbers are RoHS compliant. Pin Pin Socket Socket Size 20 DF, Solder, Snap-In Contact Size—20 *See Product Spec 108-40005 Material Pin—Brass Socket—Phosphor bronze Contact Finish Gold flash over nickel on entire contact, with additional .000030 [0.00076] gold on mating end Contacts to be soldered to wire before being inserted into housing. 18 AWG [0.8-0.9 mm2] Max. Wire Strip Form Loose Piece Contact No. Contact No. Pin Socket Pin Socket 66570-2 66569-2 66570-3 66569-3 .085 [2.16] Dia. Max. .390 [9.91] .133 [3.38] Max. .560 [14.22] Ref. .085 [2.16] Dia. Max. .070 [1.78] Dia. Max. .580 [14.73] .0400±.0015 [1.02±0.034] Dia. .155 [3.94] Localized Gold Plate Area Signal Contacts (Continued)