65S36R-MSOS3 ROSENBERGER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

4.1-9.5 Calibration Kit Plug 65S36R-MSOS3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/09.14/6.2 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 60169-11, DIN 47231 Contents and Documentation This kit is delivered with

  • Standard Definitions Card Printed Standard Definitions that can be used on nearly all Vector Network Analyzers
  • Lanyard
  • Hard Shell Case Material and plating Connector parts Material Plating Center conductor CuBe Gold, min. 1.27 µm, over nickel Outer conductor Stainless steel Passivated Coupling nut Brass White bronze(e.g. Optalloy®) Body Brass White bronze(e.g. Optalloy®); powder-coated Dielectric PTFE Substrate Al 2O 3

4.1-9.5 Calibration Kit Plug 65S36R-MSOS3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/09.14/6.2 Electrical data Frequency range DC to 6 GHz Open Return loss ≤ 0.15 dB, DC to 6 GHz Error from nominal phase 1 ≤ 3.0 °, DC to 6 GHz Short Return loss ≤ 0.15 dB, DC to 6 GHz Error from nominal phase 2 ≤ 2.0 °, DC to 6 GHz Load Return loss ≥ 42 dB, DC to 2.5 GHz ≥ 38 dB, 2.5 GHz to 6 GHz DC-Resistance 50 Ω ± 0.5 Ω Power handling ≤ 1.0 W

1 The nominal phase is defined by the Offset Delay, the Offset Loss and the Fringing Capacitances

2 The nominal phase is defined by the Offset Delay, the Offset Loss and the Short Inductance

Mating cycles ≥ 500 Maximum torque 15 Nm Recommended torque 2 Nm Gauge 5.05 mm to 5.13 mm General standard definitions For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour of this calibration standard. The different models, units, and terms used will depend on the VNA type and they will have to be entered into the VNA. All values are based on typical geometry and plating. Open Offset Z o / Impedance / Z o 50 Ω Offset Delay 90.830 ps Length (electrical) / Offset Length 27.23 mm Offset Loss 0.70 G Ω/s Loss 0.0110 dB/ GHz Fringing Capacitances C 0 = -7.42660 x 10 -15 F / -7.42660 fF C 1 = 1625.84 x 10 -27 F/Hz / 1.62584 fF /GHz C 2 = 657.180 x 10 -36 F/Hz 2 / 0.65718 fF /GHz 2 C 3 = -139.680 x 10 -45 F/Hz 3 / -0.13968 fF /GHz 3

4.1-9.5 Calibration Kit Plug 65S36R-MSOS3 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RF_35/09.14/6.2 Short Offset Z o / Impedance / Z o 50 Ω Offset Delay 90.830 ps Length (electrical) / Offset Length 27.23 mm Offset Loss 0.70 G Ω/s Loss 0.0110 dB/ GHz Short Inductance L 0 = 0.0000 x 10 -12 H / 0.0000 pH L1 = 0.0000 x 10 -24 H/Hz / 0.0000 pH/GHz L2 = 0.0000 x 10 -33 H/Hz 2 / 0.0000 pH/GHz 2 L3 = 0.0000 x 10 -42 H/Hz 3 / 0.0000 pH/GHz 3 Load Offset Z o / Impedance / Z o 50 Ω Offset Delay 0.0000 ps Length (electrical) / Offset Length 0.000 mm Offset Loss 0.00 G Ω/s Loss 0.0000 dB/ GHz Environmental data Operating temperature range3 0 °C to +50 °C Storage temperature range -55 °C to +90 °C RoHS compliant 3 Temperature range over which these specifications are valid. Packing Standard 1 pce in bag Weight 241 g/pce Draft Date Approved Date Rev. Engineering change number Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infr inge existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.