STD65N55F3 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

N-channel 55V - 8.0mΩ - 65A - DPAK STripFET™ Power MOSFET General features ■ Standard threshold drive ■ 100% avalanche tested

Description

This n-channel enhancement mode Power MOSFET is the latest refinement of STMicroelectronics' unique “Single Feature Size™“ strip-based process, which has decreased the critical alignment steps, offering remarkable manufacturing reproducibility. The outcome is a transistor with extremely high packing density for low onresistance, rugged avalanche characteristics and low gate charge.

Applications

■ Switching application – Automotive Internal schematic diagram Type V DSS RDS(on) ID Pw STD65N55F3 55V <10.5m Ω 65A 110W DPAK Order code Part number Marking Package Packaging STD65N55F3 65N55F3 DPAK Tape & reel

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area
  2. ISD ≤ 65A, di/dt ≤ 300A/µs, VDD < V(BR)DSS. Tj < Tjmax

Table 2. Thermal resistance

  1. When mounted on FR-4 board of 1inch², 2oz Cu.

2 Electrical characteristics

Table 3. Static Table 4. Dynamic

  1. Pulsed: pulse duration = 300µs, duty cycle 1.5%

Table 5. Switching on/off (inductive load) Table 6. Source drain diode

  1. Pulsed: pulse duration = 300µs, duty cycle 1.5%

2.1 Electrical characteri stics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Normalized BV DSS vs temperature Figure 6. Static drain-source on resistance

3 Test circuit

Figure 12. Unclamped inductive load test Figure 13. Unclamped inductive waveform Figure 14. Switching times test circuit for Figure 15. Gate charge test circuit Figure 16. Test circuit for inductive load Figure 17. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm. inch A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.9 0.025 0.035 b4 5.2 5.4 0.204 0.212 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 D1 5.1 0.200 E 6.4 6.6 0.252 0.260 E1 4.7 0.185 e 2.28 0.090 e1 4.4 4.6 0.173 0.181 H 9.35 10.1 0.368 0.397 L 1 0.039 (L1) 2.8 0.110 L2 0.8 0.031 L4 0.6 1 0.023 0.039 R 0.2 0.008 V2 0° 8° 0° 8° DPAK MECHANICAL DATA 0068772-F

STD65N55F3 Packaging mechanical data

5 Packaging mechanical data

DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0.795 G 16.4 18.4 0.645 0.724 N 50 1.968 T 22.4 0.881 BASE QTY BULK QTY 2500 2500 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 12.1 0.476 D 1.5 1.6 0.059 0.063 D1 1.5 0.059 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 1.574 W 15.7 16.3 0.618 0.641 TAPE MECHANICAL DATA All dimensions are in millimeters

6 Revision history

Table 7. Revision history