6561 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 7/10/02 SY/EH/LS PomonaACCESS 90739 (800) 444-6785 or (425) 446-6010 Last saved by Laura Goldberg More drawings available at www.pomonaelectronics.com C:\\Laura Goldberg\\FlukeDataSheet\\d6372_6559-60-61_2_02.doc Page 1 of 2 Model 6372, 6559, 6560, 6561 Male Mini-Connector “Do -It-Yourself” Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800 -241-2060 FEATURES:
- Molded in contacts assure precision alignment
- Matching thermocouple alloys reduce EMF
- Channel design isolates wires for clear, strong signals
- Make your own extension cables MATERIALS: Insulator – Hytrel 4776. MODEL NUMBER CALIBRATION COLOR
6372 K Yellow
6559 J Black
6560 E Violet
6561 T Blue
RATINGS: Maximum Ambient Temperature - 400°F. (205°C.). Maximum Wire Size – 20AWG (solid), 22 AWG (stranded) ORDERING INFORMATION: Model 6372, 6559, 6560, 6561 Note: For low voltage environments do not exceed 30VAC/60VDC.
All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 7/10/02 SY/EH/LS PomonaACCESS 90739 (800) 444-6785 or (425) 446-6010 Last saved by Laura Goldberg More drawings available at www.pomonaelectronics.com C:\\Laura Goldberg\\FlukeDataSheet\\d6372_6559-60-61_2_02.doc Page 2 of 2 Model 6372, 6559, 6560, 6561 Male Mini-Connector “Do -It-Yourself” Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800 -241-2060 ASSEMBLY INSTRUCTIONS 1. Using a flat tip screwdriver, remove lid from connector. 2. Cut back extension wire jacket (if applicable) 5/8”, strip back individual wires ¼”. 3. Remove the elastomer strain relief from the connector. Insert wires into the strain relief until flush with the extension wire outer jacket (5/8”). 4. Loosen the two wire terminal screws (Approximately 3 ½ turns counter clockwise) using a small flat tip screwdriver. 5. Insert the stripped Red* wire under the (-) terminal screw, and the remaining wire under the (+) terminal screw. Tighten down the two terminal screws. 6. Install the lid and tighten down the lid screw. *Color may vary outside of the USA.