ICS650-22 RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Packaged in 20-pin narrow SSOP (QSOP)
  • Pb (lead) free package, RoHS compliant
  • 27 MHz fundamental crystal or clock input
  • Zero ppm synthesis error in all clocks
  • Low skew 33.33 MHz clock outputs
  • Output enable controls all outputs
  • Full CMOS output swing with 25 mA output drive c apability at TTL levels
  • Advanced, low-power, sub-micron CMOS process
  • 3.3 V +10% operating voltage Block Diagram Crystal OSC Clock Synthesis and Control Circuitry 66.66 MHz

33.33 MHz

27 MHz

48 MHz

100 MHz

PRV AND STB CLOCK SOURCE CLOCK SYNTHESIZER IDT™ / ICS™ PRV AND STB CLOCK SOURCE 2 ICS650-22 REV F 051310 Pin Assignment Pin Descriptions VDD VDD VDD 33M OE 66M 33M GND 3X1/ICLK VDD 33M 18 33M 1GND X2 100M

20 VDD

20-pin (150 mil) SSOP Pin Number Pin Name Pin Type Pin Description 1 GND Power Connect to ground. 2 X2 Input Connect to a crystal input or leave open for ICLK. 3 X1/ICLK Input Connect to a crystal or reference clock input. 4, 5 VDD Power Connect to +3.3 V. 6 GND Power Connect to ground. 7 48M Output 48 MHz clock output. 8 VDD Power Connect to +3.3 V. 9 66M Output 66 MHz clock output. 10 GND Power Connect to ground. 11 OE Input Output enable active high. Internal pull-up resistor. 12, 13 33M Output 33.33 MHz clock output. 14 GND Power Connect to ground. 15, 16 VDD Power Connect to +3.3 V. 17, 18 33M Output 33.33 MHz clock output. 19 100M Output 100 MHz clock output. 20 VDD Power Connect to +3.3 V.

PRV AND STB CLOCK SOURCE CLOCK SYNTHESIZER IDT™ / ICS™ PRV AND STB CLOCK SOURCE 3 ICS650-22 REV F 051310 Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the ICS650-22. These ratings, which are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Recommended Operation Conditions Unless stated otherwise, VDD = 3.3V ±10%, Ambient Temperature 0 to +70° C Item Rating Supply Voltage, VDD 7 V All Inputs and Outputs -0.5 V to VDD+0.5 V Ambient Operating Temperature -40 to +85 ° C Storage Temperature -65 to +150 ° C Junction Temperature 125 ° C Soldering Temperature 260 ° C Parameter Min. Typ. Max. Units Ambient Operating Temperature 0 - +70 ° C Power Supply Voltage (measured in respect to GND) +3.0 +3.3 +3.6 V Parameter Symbol Conditions Min. Typ. Max. Units Operating Voltage VDD 3.0 3.3 3.6 V Input High Voltage V IH VDD/2+1 VDD/2 V Input Low Voltage V IL VDD/2 VDD/2-1 V Output High Voltage V OH IOH = -25 mA 2.4 V Output Low Voltage V OL IOL = +25 mA 0.5 V Output High Voltage V OL IOH = -8 mA VDD-0.4 V Operating Supply Current I DD No Load, OE=1 29 mA No Load, OE=0 13 mA Short Circuit Current I OS Each output ±70 mA Internal Pull-up Resistor R PU Input select 390 k Ω

PRV AND STB CLOCK SOURCE CLOCK SYNTHESIZER IDT™ / ICS™ PRV AND STB CLOCK SOURCE 4 ICS650-22 REV F 051310 Unless stated otherwise, VDD = 3.3V ±10%, Ambient Temperature 0 to +70° C Note 1: Measured with a 15 pF load. Thermal Characteristics Parameter Symbol Conditions Min. Typ. Max. Units Input Frequency 27 MHz Output Rise Time t OR 0.8 to 2.0 V (note 1) 500 ps Output Fall Time t OF 2.0 to 0.8 V (note 1) 500 ps Output Clock Duty Cycle At VDD/2 (note 1) 45 50 55 % Frequency Error All clocks 0 ppm Absolute Jitter, short term 33M, 100M clocks (note 1) + 100 ps Absolute Jitter, short term 48M clock (note 1) + 160 ps Absolute Jitter, short term 66M clock (note 1) + 140 ps Output-to-output Skew, 33M only Rising edge at VDD/2 (note 1) 01 5 0 p s Parameter Symbol Conditions Min. Typ. Max. Units Thermal Resistance Junction to Ambient θJA Still air 135 ° C/W θJA 1 m/s air flow 93 ° C/W θJA 3 m/s air flow 78 ° C/W Thermal Resistance Junction to Case θJC 60 ° C/W

PRV AND STB CLOCK SOURCE CLOCK SYNTHESIZER IDT™ / ICS™ PRV AND STB CLOCK SOURCE 5 ICS650-22 REV F 051310 Package Outline and Package Dimensions (20-pin SSOP, 150 Mil. Body) Package dimensions are kept current with JEDEC Publication No. 95

Ordering Information

“LF” denotes Pb (lead) free package. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. Part / Order Number Marking Shipping Packaging Package Temperature 650R-22LF 650R-22L Tubes 20-pin SSOP 0 to +70 ° C 650R-22LFT 650R-22L Tape and Reel 20-pin SSOP 0 to +70 ° C INDEX AREA 1 2 D E1 E SEATING PLANE A AA e - C - b .10 (.004) C c L Millimeters Inches Symbol Min Max Min Max A 1 . 3 51 . 7 5. 0 5 3. 0 6 9 A1 0.10 0.25 .0040 .010 A2 -- 1.50 -- .059 b 0.20 0.30 0.008 0.012 C 0 . 1 80 . 2 5. 0 0 7. 0 1 0 D 8 . 5 58 . 7 5. 3 3 7. 3 4 4 E 5 . 8 06 . 2 0. 2 2 8. 2 4 4 E1 3.80 4.00 .150 .157 e 0.635 Basic 0.025 Basic L 0 . 4 01 . 2 7. 0 1 6. 0 5 0 α 0° 8° 0° 8°

© 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names a nd marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA Corporate Headquarters Integrated Device Technology, Inc. www.idt.com For Sales 800-345-7015 408-284-8200 Fax: 408-284-2775 For Tech Support www.idt.com/go/clockhelp Innovate with IDT and accelerate your future networks. Contact: www.IDT.com ICS650-22 PRV AND STB CLOCK SOURCE CLOCK SYNTHESIZER

© 202 Renesas Electronics Corporation. All rights reserved. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use o any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. ('LVFODLPHURev.1.0 Mar 2020) Corporate Headquarters Contact Information TOYOSU FORESIA, 3-2-24 Toyosu, For further information on a product, technology, the most Koto-ku, Tokyo 135-0061, Japan up-to-date version of a document, or your nearest sales www.renesas.com office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners.