6497 POMONA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Features

  • This probe is recommended for general purpose probing applications and is adjustable for low and high frequencies.
  • The probe's entire core is made of a high quality ceramic hybrid.
  • Pure coaxial design and laser trimmed resistors ensure highest signal fidelity along the signal path offering high bandwidth and fast risetimes for accurate impulse measurements.
  • Probe tips are interchangeable and can be replaced easily.
  • Accessories (one of each) included with Probe are: ƒ BNC Adapter ƒ Ground Blade ƒ Ground Lead with Alligator Clip 22 cm (8.66”) ƒ Ground Spring ƒ IC Caps: 0.8mm, 1.0mm, and 1.27mm pitch ƒ Insulating Cap ƒ Protection Cap ƒ Solid Tip 0.8mm (0.0315”) ƒ Spring Tip 0.8mm (0.0315”) ƒ Sprung Hook ƒ Trimmer Tool ƒ 2 Footer Positioner ƒ Copper (Cu) Pads
  • Our passive probes are spring loaded, with needle sharp tips to support precise and safe measurements.
  • The Readout BNC connector enables automatic recognition by scopes that feature a sense ring to detect probe attenuation. Specifications Attenuation Ratio 10:1 Maximum Input Voltage CAT II¹ 300 Vrms Scope Bandwidth MHz 350 System Bandwidth MHz (-3 dB) 350 System Risetime (ns) < 1 Probe Input Resistance (MΩ) 10 Probe Input Capacitance (pF) < 14.5 Compensation Range (pF) 10 – 35 Readout Actuator² Yes Cable Length 4 ft. (1.2 m) 1 Rating: Per IEC 61010-031. Maximum voltage allowed on the low or ground connection including shell and housing must not exceed 30 V. 2 Any oscilloscope that uses the Tektronix® style range actuator.

Ordering Information

Model: 6497