644575

643067-6 TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 66

Technical content

APPLIANCES / / / MTA, CST-100 II AND SL-156 CONNECTORS CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors

.100 [2.54] Centerline Connectors Connectors—UL94V-2 and UL94V-0 MTA-100 Posted Connectors (Wire-to-Wire) UL94V-2 Headers—UL94V-0 .156 [3.96] Centerline Connectors Connectors—UL94V-2 and UL94V-0 MTA-156 Posted Connectors (Wire-to-Wire)—UL94V-2 MTA-156 Headers—UL94V-0 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board headers, mass termination connectors preloaded with contacts, crimp-snap contacts and housings, and card edge connectors with preloaded contacts. The list at right identifies by centerline the types of product available and is meant to be of assistance to you in the product selection process. IDC MT A-100 Crimp CST -100 II IDC MT A-156

Contents

Need More Information? Call Technical Support at the numbers listed on the back of this catalog. Technical Support is staffed with special- ists well versed in TE products. They can provide you with:

• Technical support
• Catalogs
• Technical Documents
• Product Samples
• Authorized Distributor Locations Crimp SL-156 Contents (continued) PAGE 3 CONNECTOR SELECTION GUIDE Product Name Centerline Contact Termination Wire-to-Wire Options No. of Positions Wire Size (AWG) Wire Insulation Dia. Max. Current Rating (A)** Voltage Rating Max. (VAC) Operating Temp. Range (°C) UL Flammability Replacement Contacts Approvals .100" Centerline MTA-100 IDC Connectors and Headers .100 2.54 IDC Planned 2-28 28-22 .060* 1.52 5 250 -55 to +105 V-0 & V-2 Yes CST-100 II Contacts and Housings .100 2.54 Crimp Planned 2-28 26-22 .065 1.65 4 250 -55 to +105 V-0 Yes .156" Centerline MTA-156 Connectors and Headers .156 3.96 IDC Yes 2-24 16-18 .095* 2.41 7 600 -55 to +105 V-0 & V-2 Yes SL-156 Contacts and Housings .156

3.96 Crimp No

1-24; 2-10 w/ through board latch 24-18 .105 2.67 10 250 -25 to +105 V-0 Yes SL-156 Large Ins. Dia. (LID) Contacts and Housings .156 3.96 Crimp No 2-24 24-16 .112 2.84 10 250 -25 to +105 V-0 Yes *When terminated one position at a time. **Current Rating is application dependent.

MTA, CST-100 II and SL-156 Connectors PRODUCT FACTS

• Connectors and headers for 2 through 28 positions; wire sizes of 22, 24, 26 and 28 AWG [0.4-0.08 mm2]
• Wire-to-Post Connectors preloaded with dual beam contacts
• Connectors and headers, except shrouded headers, are end-to-end stackable
• Connector styles include both closed end and feed thru connectors with locking ramps, with and without polarizing tabs
• Molded ribs on housing do not allow reverse mating
• Posted connectors for 2 through 19 positions
• Connectors preloaded with IDC contacts
• All contacts are slotted for insulation displacement (IDC) terminal technique
• Contacts are lubricated for fretting corrosion protection
• Benefits derived from the MTA-100 system include increased quality and ease of handling such as:
• One-step assembly
• No wire stripping
• No contact damage
• Reduced wiring errors
• Simpler tooling
• Simple maintenance and repair
• Meets the material requirements of Table 23.1 of UL1410 Standards for Television Receiver and Video Products (wire-to post connectors only)
• Recognized under the Component Program of Underwriters Labora- tories Inc., File No. E28476
• Certified by Canadian Standards Association, File No. LR7189 Technical Documents Product Specification 108-1050 MTA-100 Connectors Application Specifications 114-1019 MTA-100 Connectors 114-1031 MTA-100 Ribbon Cable Assembly MTA-100 connectors accept discrete and ribbon cable wire sizes ranging from 22–28 AWG [0.4–0.08 mm2] with maxi- mum insulation outside diameter of .060 [1.52] for terminating single wire and .050 [1.27] for mass termination of wires. Tin plated solid, fused stranded, or stranded (7 strands) wire with PVC insulation can be used on 22–28 AWG [0.4–0.9 mm2] MTA-100 connectors and 19 stranded wire on 22–24 AWG [0.4–0.2 mm2] MTA-100 connectors. Only one wire to be terminat- ed into an IDC contact slot. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .100 [2.54] centerline head- ers completes the system. Headers are available with straight or right-angle posts, in flat, polarized or friction lock styles. Headers are available in 2 through 28 positions. Shrouded headers are avail- able in 2 through 14 positions. Performance Data* Voltage Rating—250 vac Current Rating—5 amp max. Low-Level Resistance— 6 mΩ max. initial Dielectric Withstanding Voltage— 750 vac/1 min. Insulation Resistance— 5000 MΩ min. initial Operating Temperature— -55° C to +105° C Note: Refer to page 52 for approved wire listings. *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. .100 [2.54] Centerline MTA-100 IDC Connectors and Headers

MTA-100 Connector/Header Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. MTA, CST-100 II and SL-156 Connectors 6475321744075647609

640440 YYYYYYYYYYYYYYYYYYN

640441 YYYYYYYYYYYYYYYYYYN

640442 YYYYYYYYYYYYYYYYYYN

640443 YYYYYYYYYYYYYYYYYYN

640468 YYYYYYYYYYYYYYYYYYN

640469 YYYYYYYYYYYYYYYYYYN

640470 YYYYYYYYYYYYYYYYYYN

640471 YYYYYYYYYYYYYYYYYYN

640620 YYYYYYYYYYYYYYYYYYN

640621 YYYYYYYYYYYYYYYYYYN

640622 YYYYYYYYYYYYYYYYYYN

640623 YYYYYYYYYYYYYYYYYYN

641311 YYYYYYYYYYYYYYYYYYN

641312 YYYYYYYYYYYYYYYYYYN

641313 YYYYYYYYYYYYYYYYYYN

641314 YYYYYYYYYYYYYYYYYYN

641534 YYYYYYYYYYYYYYYYYYN

641535 YYYYYYYYYYYYYYYYYYN

641536 YYYYYYYYYYYYYYYYYYN

641537 YYYYYYYYYYYYYYYYYYN

641653 YYYYYYYYYYYYYYYYYYN

641654 YYYYYYYYYYYYYYYYYYN

641655 YYYYYYYYYYYYYYYYYYN

641656 YYYYYYYYYYYYYYYYYYN

643498 YYYYYYYYYYYYYYYYYYN

643813 YYYYYYYYYYYYYYYYYYN

643814 YYYYYYYYYYYYYYYYYYN

643815 YYYYYYYYYYYYYYYYYYN

643816 YYYYYYYYYYYYYYYYYYN

643828 YYYYYYYYYYYYYYYYYYN

644083 YYYYYYYYYYYYYYYYYYN

644312 YYYYYYYYYYYYYYYYYYN

644313 YYYYYYYYYYYYYYYYYYN

644497 YYYYYYYYYYYYYYYYYYN

644511 YYYYYYYYYYYYYYYYYYN

644512 YYYYYYYYYYYYYYYYYYN

644513 YYYYYYYYYYYYYYYYYYN

644514 YYYYYYYYYYYYYYYYYYN

644540 YYYYYYYYYYYYYYYYYYN

644563 YYYYYYYYYYYYYYYYYYN

644564 YYYYYYYYYYYYYYYYYYN

644565 YYYYYYYYYYYYYYYYYYN

644574 YYYYYYYYYYYYYYYYYYN

644575 YYYYYYYYYYYYYYYYYYN

644576 YYYYYYYYYYYYYYYYYYN

644577 YYYYYYYYYYYYYYYYYYN

644578 YYYYYYYYYYYYYYYYYYN

644579 YYYYYYYYYYYYYYYYYYN

644795 YYYYYYYYYYYYYYYYYYN

*1375820 YYYYYYYYNNYYNNYYYYY *Select contact plating to match header plating. NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYYYYYYYYYYY N NYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYYYYYYYYYYY N NYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY YYYYYYYYYYYYYY 640452640453640454640455640456640457644456644457644486644488644694644695644803644861644874644875644876644877644892644893644894647047647048647050647051647106647166 Headers Connectors 647502647531647623 Matrix for Tin Plated Part Numbers PAGE 5

MTA, CST-100 II and SL-156 Connectors MTA-100 Connector/Header Mateability Guide (continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers

641237 YYYYYYYYYYYYNNNYYY

641238 YYYYYYYYYYYYNNNYYY

641239 YYYYYYYYYYYYNNNYYY

641240 YYYYYYYYYYYYNNNYYY

641241 YYYYYYYYYYYYNNNYYY

641242 YYYYYYYYYYYYNNNYYY

641243 YYYYYYYYYYYYNNNYYY

641244 YYYYYYYYYYYYNNNYYY

644020 YYYYYYYYYYYYNNNYYY

644042 YYYYYYYYYYYYNNNYYY

644043 YYYYYYYYYYYYNNNYYY

644044 YYYYYYYYYYYYNNNYYY

644702 YYYYYYYYYYYYNNNYYY

644726 YYYYYYYYYYYYNNNYYY

*1375820 YYYYYYNNYYYYYYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY Y YYYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY Y YYYYYYY YYYYYYYY 641211641212641213641214641215641216644487644489644884644885644886644887644896644897644898647108647109647114647116647117647168 Headers Connectors

641190 YYYYYYYYYYYYYYYYYYYYY

641191 YYYYYYYYYYYYYYYYYYYYY

641192 YYYYYYYYYYYYYYYYYYYYY

641193 YYYYYYYYYYYYYYYYYYYYY

641198 YYYYYYYYYYYYYYYYYYYYY

641199 YYYYYYYYYYYYYYYYYYYYY

641200 YYYYYYYYYYYYYYYYYYYYY

641201 YYYYYYYYYYYYYYYYYYYYY

644038 YYYYYYYYYYYYYYYYYYYYY

644040 YYYYYYYYYYYYYYYYYYYYY

647477 YYYYYYYYYYYYYYYYYYYYY

647480 YYYYYYYYYYYYYYYYYYYYY

*1375820 NNNNNNNNNNNNNNNNNNNYY

1744020 YYYYYYYYYYYYYYYYYYYYY

641122641123641124641125641126641127644888644889644890644891647075647076647078647079647107647167 Headers Connectors *Select contact plating to match header plating. *Select contact plating to match header plating. 6476266476246475341744047 6476256476276475331744074 1744163 647467

MTA, CST-100 II and SL-156 Connectors Material and Finish Housing—UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts—Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold-plated over nickel Color Coding by Wire Size for UL94V-2 Connectors

28 AWG—Green

26 AWG—Blue

24 AWG—White

22 AWG—Red

All wire sizes in UL94V-0—Black For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 13 thru 23. Notes: 1. Refer to pages 52-56 for approved wire listing. 2. For strain reliefs and dust covers, see page 9. 3. For keying plugs, see page 10. 4. Other circuit sizes are available upon request. Minimums may apply. 5. Connector circuits can be molded closed for keying purposes. Minimums may apply. 6. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 7. To determine connector overall length (dim. A), multiply .100 x the number of circuits. Example: .100 x 10 circuits equals 1.000 inch [25.4 mm]. MTA-100 IDC Connectors—Closed End and Feed-Thru Closed End Connectors .520 [13.21] .275 [6.99] .075 [1.91] .245 [6.22].275 [6.99] .184 .056 [4.67] .100 [2.54]Typ. A [1.42] Without Polarizing Tabs With Polarizing Tabs .075 [1.91] .228 [5.80] .520 [13.21] .275 [6.99] .075 [1.91] .245 [6.22] .305 [7.75] .184 .056 [4.67] .100 [2.54]Typ. A [1.42] Without Polarizing Tabs With Polarizing Tabs .075 [1.91] .228 [5.80] Feed-Thru Connectors

MTA, CST-100 II and SL-156 Connectors MTA-100 IDC Connectors—Closed End and Feed-Thru (continued) Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number, and their RoHS (Restrictions on Certain Hazard- ous Substances) Compliant (lead free) equivalent available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector without polarizing tabs for 22 AWG wire would be: Base number 640440 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-640440-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640440-2 3 3-640440-3 4 3-640440-4 5 3-640440-5 6 3-640440-6 7 3-640440-7 8 3-640440-8 9 3-640440-9 10 4-640440-0 11 4-640440-1 12 4-640440-2 13 4-640440-3 14 4-640440-4 15 4-640440-5 16 4-640440-6 17 4-640440-7 18 4-640440-8 19 4-640440-9 20 5-640440-0 21 5-640440-1 22 5-640440-2 23 5-640440-3 24 5-640440-4 25 5-640440-5 26 5-640440-6 27 5-640440-7 28 5-640440-8 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Bas e Part Numbers C lose d E n d F e ed-Th r u Withou t T a b s With T a b s Withou t T a b s With T a b s C o nnector T ype & Wir e S i z e Connector RoHS Connector RoHS Connector RoHS Connector RoHS Standar d UL94V -2, T in Plated 22 A WG 640440 32–58 643813 32–58 640620 32–58 644540 1 32–450.3–0.4 mm 2 24 A WG 640441 32–58 643814 32–58 640621 32–58 644563 1 32–540.2 mm 2 26 A WG 640442 32–58 643815 32–58 640622 32–58 644564 1 32–450.12–0.15 mm 2 28 A WG 640443 32–58 643816 32–58 640623 32–58 644565 1 32–450.08–0.09 mm 2 T ape Mounted on Reel UL94V -2, T in Plated 22 A WG 640468 32–58 644511 42–68 641311 32–58 — —0.3–0.4 mm 2 24 A WG 640469 32–58 644512 32–58 641312 32–58 — —0.2 mm 2 26 A WG 640470 32–58 644513 32–58 641313 32–58 — —0.12–0.15 mm 2 28 A WG 640471 32–58 644514 32–58 641314 32–58 — —0.08–0.09 mm 2 Standar d UL94V -2, .000030 [0. 00076] Gold Plated 22 A WG 641237 32–58 644042 32–58 641241 32–58 644702 1 32–450.3–0.4 mm 2 24 A WG 641238 32–58 644020 32–58 641242 32–58 — —0.2 mm 2 26 A WG 641239 32–58 644043 1 32–44 641243 32–58 644726 1 32–450.12–0.15 mm 2 28 A WG 641240 32–58 644044 1 32–44 641244 32–58 — —0.8–0.9 mm 2 Standar d UL94V -2, .000015 [0. 00038] Gold Plated 22 A WG 641190 32–58 644038 1 32–44 641198 32–58 647477 32–460.3–0.4 mm 2 24 A WG 641191 32–58 1744020 1 32–44 641199 32–58 — —0.2 mm 2 26 A WG 641192 32–58 644040 1 32–44 641200 32–58 647480 32–430.12–0.15 mm 2 28 A WG 641193 32–58 — — 641201 32–58 — —0.08–0.09 mm 2 LED* , UL94V -2, T in Plated (See Note 1) 22 A WG 641534 32–33 — — 641653 32–33 — —0.3–0.4 mm 2 24 A WG 641535 32–33 644795 32–33 641654 32–33 — —0.2 mm 2 26 A WG 641536 32–33 — — 641655 32–33 — —0.12–0.15 mm 2 28 A WG 641537 32–33 — — 641656 32–33 — —0.08–0.09 mm 2 Standar d UL94V -0, T in Plated (Gold is avail able, minimums may apply .) (Black in color) 22 A WG 643498 1 32–45 644083 1 32–45 644575 1 32–45 644578 1 32–450.3–0.4 mm 2 24 A WG 644574 1 32–45 644312 1 32–45 644576 1 32–45 644579 1 32–450.2 mm 2 26 A WG 643828 1 32–45 644313 1 32–45 644577 1 32–45 644497 1 32–450.12–0.15 mm 2 1 Other circuit siz es are a v ailab le upon request. Minim ums ma y apply . 2 T ape mounted. Note: : Blocked circuit configur ations are a v ailab le . Contact product engineer or product manager f or detail s . Minim ums ma y apply . MT A-100 IDC Connectors—Closed End and Feed-Thru

MTA, CST-100 II and SL-156 Connectors Covers Material (RoHS Compliant) Strain Relief Cover—UL94V-2 rated, nylon, white Dust Covers—UL94V-0 rated, polyester, white Cover Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed end strain relief cover would be: Base number 643075 plus prefix-and-suffix 1- — -0 The correct ordering number is 1-643075-0 MTA-100 IDC Connector Accessories Closed End Strain Relief Covers Feed-Thru Strain Relief Covers Closed End Dust Covers Feed-Thru Dust Covers .340 [8.64] .345 [8.76] .127 [3.23] A A .130 .105 .360 .335 [3.3] [2.67] [9.14] Retention Dimple [8.51] .360 [9.14] A .127 [3.23] A [3.3] [6.22] .395 .245 .130 [10.03] Retention Dimple Note: This portion of the front locking bar may or may not be present. Note: This portion of the front locking bar may or may not be present. Base Part Numbers Closed End Feed-Thru Strain Relief Dust Strain Relief Dust Covers Covers Covers Covers 643075 2–28 640550 2–28 643077 2–28 640642 3-28 Cover Length 2 .200 -25.08 3 .300 -37.62 4 .400 -410.16 5 .500 -512.7 6 .600 -615.24 7 .700 -717.78 8 .800 -820.32 9 .900 -922.86 10 1.00 1- -025.4 11 1.100 1- -127.94 12 1.200 1- -230.48 13 1.300 1- -333.02 14 1.400 1- -435.56 15 1.500 1- -538.1 16 1.600 1- -640.64 17 1.700 1- -743.18 18 1.800 1- -845.72 19 1.900 1- -948.26 20 2.000 2- -050.8 21 2.100 2- -153.34 22 2.200 2- -255.88 23 2.300 2- -358.42 24 2.400 2- -460.96 25 2.500 2- -563.5 26 2.600 2- -666.04 27 2.700 2- -768.58 28 2.800 2- -871.12 Cover No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix Part Nos. No. of Circuits Cover Part Nos. No. of Circuits Cover Part Nos. No. of Circuits Cover Part Nos. No. of Circuits Closed End Strain Relief Covers Feed-Thru Strain Relief Covers Closed End Dust Covers Feed-Thru Dust Covers .340 [8.64] .345 [8.76] .127 [3.23] A A .130 .105 .360 .335 [3.3] [2.67] [9.14] Retention Dimple [8.51] .360 [9.14] A .127 [3.23] A [3.3] [6.22] .395 .245 .130 [10.03] Retention Dimple Note: This portion of the front locking bar may or may not be present. Note: This portion of the front locking bar may or may not be present. Base Part Numbers Closed End Feed-Thru Strain Relief Dust Strain Relief Dust Covers Covers Covers Covers 643075 2–28 640550 2–28 643077 2–28 640642 3-28 Cover Length 2 .200 -25.08 3 .300 -37.62 4 .400 -410.16 5 .500 -512.7 6 .600 -615.24 7 .700 -717.78 8 .800 -820.32 9 .900 -922.86 10 1.00 1- -025.4 11 1.100 1- -127.94 12 1.200 1- -230.48 13 1.300 1- -333.02 14 1.400 1- -435.56 15 1.500 1- -538.1 16 1.600 1- -640.64 17 1.700 1- -743.18 18 1.800 1- -845.72 19 1.900 1- -948.26 20 2.000 2- -050.8 21 2.100 2- -153.34 22 2.200 2- -255.88 23 2.300 2- -358.42 24 2.400 2- -460.96 25 2.500 2- -563.5 26 2.600 2- -666.04 27 2.700 2- -768.58 28 2.800 2- -871.12 Cover No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix Part Nos. No. of Circuits Cover Part Nos. No. of Circuits Cover Part Nos. No. of Circuits Cover Part Nos. No. of Circuits

MTA, CST-100 II and SL-156 Connectors Keying Plug with Carrier Strip (10 plugs per strip) Part No. 641994-1 Material (RoHS Compliant) UL94V-2 rated, nylon, natural color Note: Removal of contact is not necessary when using keying plug. Replacement IDC Contacts Material and Finish Phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Note: TE does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. Crimp Snap-In Contacts Material and Finish Phosphor bronze, tin plated. MTA-100 IDC Connector Accessories (continued) Wire Size Part Numbers AWG mm2 Standard .000030 [0.00076] .000015 [0.00038] LED Tin Plated Gold Plated Gold Plated 22 0.3–0.4 640636-3 641186-4 641186-3 641643-2 24 0.2 640637-3 641187-4 641187-3 641644-2 26 0.12–0.15 640638-3 641188-4 641188-3 641645-2 28 0.08–0.09 640639-3 641189-4 641189-3 641646-2 Wire Size Part Nos. AWG mm2 Loose Piece* Strip** 26-22 0.12–0.4 *Hand T ool No . 59836-1 (IS 408-6527) **Applicator No . 466747-1 (IS 408-8040) Special applications f or cr imp snap-in contacts are: 1. Doub le wire per contact 2. Coax or shielded wire 3. Mix ed wire siz e in same connector Note: Only one cr imp snap-in contact per connector . .125 [3.18] .038 [0.97] .077 [1.96] .065 [1.65] .300 [7.62] .500 [12.7] .027 [0.69] Sq. Ref. 1.800 [45.72] Ref. .452 [11.48] .075 [1.91] .070 [1.78] .070 [1.78] .142 [3.61] Max. .425 [10.8] 640709-2 640708-2 Tin Plated

MTA, CST-100 II and SL-156 Connectors MTA-100 Connector/Connector Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combina- tion is not acceptable for mating. Matrix for Tin Plated Part Numbers

640440 YYYYYYYY

640441 YYYYYYYY

640442 YYYYYYYY

640443 YYYYYYYY

640468 YYYYYYYY

640469 YYYYYYYY

640470 YYYYYYYY

640471 YYYYYYYY

640620 YYYYYYYY

640621 YYYYYYYY

640622 YYYYYYYY

640623 YYYYYYYY

641311 YYYYYYYY

641312 YYYYYYYY

641313 YYYYYYYY

641314 YYYYYYYY

641534 YYYYYYYY

641535 YYYYYYYY

641536 YYYYYYYY

641537 YYYYYYYY

641653 YYYYYYYY

641654 YYYYYYYY

641655 YYYYYYYY

641656 YYYYYYYY

643498 YYYYYYYY

643828 YYYYYYYY

644574 YYYYYYYY

644575 YYYYYYYY

644576 YYYYYYYY

644577 YYYYYYYY

1375820 NNNNNNNN

647000647001647002647003647004647005647006647007 Posted Connectors Connectors *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs.

MTA, CST-100 II and SL-156 Connectors MTA-100 Connector/Connector Mateability Guide (continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combina- tion is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers

641237 YYYYYYYY

641238 YYYYYYYY

641239 YYYYYYYY

641240 YYYYYYYY

641241 YYYYYYYY

641242 YYYYYYYY

641243 YYYYYYYY

641244 YYYYYYYY

647008647009647010647011647012647013647014647015 Posted Connectors Connectors *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs.

641190 YYYYYYYY

641191 YYYYYYYY

641192 YYYYYYYY

641193 YYYYYYYY

641198 YYYYYYYY

641199 YYYYYYYY

641200 YYYYYYYY

641201 YYYYYYYY

1744020 YYYYYYYY

647008647009647010647011647012647013647014647015 Posted Connectors Connectors *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs.

MTA, CST-100 II and SL-156 Connectors MTA-100 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru Base Part Numbers Connector T ype Closed End Connector Feed-Thr u Connector & Wire Size Part Nos. RoHS Equiv . Part Nos. No. of Circuits Standard UL 94V -2, T in Plated

22 A WG 647000 647004 — 2

0.3–0.4 mm 2 32–49 1

24 A WG 647001 32–49 1 647005 — 2

0.2 mm 2

26 A WG 647002 32–49 1 647006 — 2

0.12–0.15 mm 2

28 A WG 647003 32–49 1 647007 — 2

0.08–0.09 mm 2 Standard UL 94V -2, .000030 [0.00076] Gold Plated

22 A WG 647008 32–49 1 647012 — 2

0.3–0.4 mm 2

24 A WG 647009 32–49 1 647013 — 2

0.2 mm 2

26 A WG 647010 32–49 1 647014 — 2

0.12–0.15 mm 2

28 A WG 647011 32–49 1 647015 — 2

0.08–0.09 mm 2 Standard UL 94V -2, .000015 [0.00038] Gold Plated

22 A WG 647016 32–49 1 647020 — 2

0.3–0.4 mm 2

24 A WG 647017 32–49 1 647021 — 2

0.2 mm 2

26 A WG 647018 32–49 1 647022 — 2

0.12–0.15 mm 2

28 A WG 647019 32–49 1 647023 — 2

0.08–0.09 mm 2 1 2 and3position MT A-100 P osted Connector s (Closed End) can not mate with MT A-100 connecto rs with polar izing tabs . 2 P ar ts ma y be man uf actured upon request. Minim ums ma y apply . Contact product engineer or product manager f or details . Closed End Feed-Thru T echnical Documents Product Specification 108-1050-1MT A-100 Posted Connector Application Specification 114-1019 MT A-100 Connectors Replacement IDC Contacts Material and Finish Contacts —Copper alloy, post tin or gold plated over nickel No. of Dim. Circuits A B 2 .300 .227 [7.62] [5.77] 3 .400 .327 [10.16] [8.31] 4 .500 .427 [12.70] [10.85] 5 .600 .527 [15.24] [13.39] No. of Dim. Cir cuits A B 6 .700 .627 [17.78] [15.93] 7 .800 .727 [20.32] [18.47] 8 .900 .827 [22.86] [21.01] 9 1.000 .927 [25.40] [23.55] No. of Dim. Circuits A B 10 1.100 1.027 [27.94] [26.09] 11 1.200 1.127 [30.48] [28.63] 12 1.300 1.227 [33.02] [31.17] 13 1.400 1.327 [35.56] [33.71] No. of Dim. Cir cuits A B 14 1.500 1.427 [38.10] [36.25] 15 1.600 1.527 [40.64] [38.79] 16 1.700 1.627 [43.18] [41.33] 17 1.800 1.727 [45.72] [43.87] 18 1.900 1.827 [48.26] [46.41] 19 2.000 1.927 [50.80] [48.95] Part Numbers Wire Size T in .000030 A WG mm 2 Plated [.00076] Gold Plated 0.3-0.4 0.2 0.12-0.15 0.8-0.9 3-647030-1 3-647031-1 3-647032-1 3-647033-1 3-647030-2 3-647031-2 3-647032-2 3-647033-2 .843 [21.40] B Dim. .303 [7.70] .079 [2.00] .415 [10.54] .025 [0.54] Sq. .100 [2.54] T yp . A Dim. .843 [21.40] B Dim. .303 [7.70] .079 [2.00] .415 [10.54] .025 [0.54] Sq. .100 [2.54] T yp . A Dim. .083 [2.10] .770 [19.55].075 [1.91] .025 [0.64] Material and Finish Housing—UL94V-2 rated, nylon, see chart for color Contacts—Copper alloy, post tin or gold plated over nickel (see chart) Note: 1. Mating half visuals — pages 7 & 8. 2. Use feed thru strain relief covers & feed thru dust covers (if needed)—page 9. 3. Approved wire listing—pages 52-56. Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector for 22 AWG wire would be: Base number 647000 plus prefix-and-suffix 4- — -2 The correct ordering number is 4-647000-2 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647000-2 thru 19 4-647000-9 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Color Coding by Wire Size for UL94V-2 Connectors Voltage Rating—250 vac Current Rating—5 amp max. Low-Level Resistance—6 mΩ max. initial Dielectric Withstanding Voltage— 750 vac/1 min. Insulation Resistance—5000 MΩ min. initial Operating Temperature—-55° C to +105° C

MTA, CST-100 II and SL-156 Connectors MTA-100 Flat Headers—Straight and Right-Angle Straight Post (.025 [0.64] Square) .200 [5.08] A .025 [0.64] Sq. .100 [2.54] Typ..050 [1.27] Typ. Post No. 1 .295 [7.49] .100 [2.54] .140 [3.56] Ref. .535 [13.59] .200 [5.08] A .100 [2.54] .025 [0.64] Sq. .050 [1.27] Typ. .100 [2.54] Typ. .140 [3.56] Ref. .295 [7.49] .062 [1.57] Post No. 1 Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board when mate d with MT A- 100 Connector . X = .120 [3.05] min., when mated with CST -100 II Connector . Right-Angle Post (.025 [0.64] Square) Base Part Numbers Straight Posts Right-Angle Posts Header No. of Posts/ Header No. of Posts/ Part Nos. RoHS Equiv . Part Nos. RoHS Equiv . Standard UL94V -0, T in Plated 640452 2–28 640453 2–28 Standard UL94V -0, .000030 [0. 00076] Gold Plated 641211 2–28 641212 2–28 32–58 32–58 Standard UL94V -0, .000015 [0. 00038] Gold Plated 641122 2–28 641123 2–28 32–58 32–58 .100 [2.54] Typ. .050/.040 [1.27/1.02]Edge of Board .120 [3.05] Min. Dia. .100 [2.54] Typ. .050/.040 [1.27/1.02] Edge of Board X Dia. Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Material and Finish Housing—UL94V-0 rated, polyester, white Contacts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641211 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-641211-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-641211–2 thru 28 5-641211-8 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engi- neer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-100 Narrow Flat Headers—Straight and Right-Angle .044 [1.12] Typ. .100 [2.54] .100 [2.54] Typ. A .092 [2.34] .150 [3.81] .260 [6.6] .110 [2.79] Ref. .025 [0.64] Sq. Post No. 1 Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) Straight and Right-Angle Post with Retentive Legs .044 [1.12] Typ. .100 [2.54] Post No. 1 .100 [2.54] Typ. .295 [7.49] .505 [12.83] .110 [2.79] Ref. A .092 [2.34] .025 [0.64] Sq. Recommended Mounting Hole Patter n for .062 [1. 57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .110 [2.79] Ref. .0335 [0.85] Base Part Numbers Straight Posts Right -Angle Posts Without With Without With Retentive Legs Retentive Legs Retentive Legs Retentive Legs Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Standard UL94V -0, T in Plated 644456 32–58 644695 32–58 644457 32–58 644694 32–58 Standard UL94V -0, .000030 [0. 00076] Gold Plated 644884 2–28 644886 2–28 644885 2–28 644887 2–28 Standard UL94V -0, .000015 [0. 00038] Gold Plated 644888 2–28 644890 2–28 644889 2–28 644891 2–28 .100 [2.54] Typ. .050/.040 [1.27/1.02] Edge of Board .060 [1.52] Min. Dia. Headers Dia. Leg Headers .037 [0.94 ±.002 ±0.05] .100 Typ. Edge of Board .060 [1.52] [2.54] Min. .050/.040 [1.27/1.02] Dia. For Straight LegFor Straight Leg For Retentive Dia. Leg Headers For Retentive Headers .037 [0.94 ±.002 ±0.05] Note: Consult Product Drawing for details on placing headers onto PC boards. High temperature product available. Please contact Sales Engineer or Product Information Center. Material and Finish Housing—UL94V-0 rated, polyester, white Contacts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers without retentive legs are suitable for breakaway application. 3. 2 or 3 retentive leg(s) per header, depending upon number of positions. 4. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 5. To determine header overall length (dim. A) multiply .100 x the number of posts minus (–) inches [25.1 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and without retentive legs would be: Base number 644456 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-644456-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644456–2 thru 28 5-644456-8 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engi- neer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-100 Polarized Headers—Straight and Right-Angle .125 [3.18]A .025 [0.64] Sq. .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .295 [7.49] .100 [2.54] .535 [13.59] .290 [7.37] .035 [0.89] Min. .140 [3.56] Ref. .225 [5.72] Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) .125 [3.18] A .025 Sq. .100 [2.54] [0.64] Typ. .050 [1.27] Typ. Post No. 1 .295 [7.49] .290 [7.37] .100 [2.54] .140 [3.56].140 [3.56] Max. .035 [0.89] Min. .225 [5.72] Recom mended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Base Part Numbers Straight Posts Right- Angle Posts Without With Without Wit h Retentive Legs Retentive Legs Retentive Legs Retentive Legs Standard UL94V -0, T in Plated 640454 2–28 644876 2–28 640455 2–28 644877 2–28 Standard UL94V -0, .000030 [0. 00076] Gold Plated 641213 32–58 — — 641214 32–58 — — Standard UL94V -0, .000015 [0. 00038] Gold Plated 641124 32–58 — — 641125 32–58 — — .100 [2.54] Typ. Edge of Board .130 [3.30] Min. .050/.040 [1.27/1.02] Dia. for straight leg headers Dia. for retentive leg headers Dia. for straight leg headers Dia. for retentive leg headers .037 [0.94 ±.002 ±0.05] .100 [2.54] Typ. Edge of Board X .050/.040 [1.27/1.02] .125 [3.18] Ref. 34 ° .135 [3.43] Ref. 34 ° Retentive Leg Retentive Leg max. when mated with MT A-100 Connector . max. when mated with CST -100 II Connector . Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. .037 [0.94 ±.002 ±0.05] Material and Finish Housing—UL94V-0 rated, polyester, white Contacts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641213 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-641213-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-641213–2 thru 28 5-641213-8 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engi- neer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-100 Friction Lock Headers—Straight and Right-Angle .125 [3.18]A .025 [0.64] Sq. .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .295 [7.49] .100 [2.54] .535 [13.59] .290 [7.37] .035 [0.89] Min. .140 [3.56] Ref. .225 [5.72] Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) .125 [3.18] A .025 Sq. .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .295 [7.49] .290 [7.37] .100 [2.54] .140 [3.56].140 [3.56] Max. .035 [0.89] Min. .225 [5.72] Recom mended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Base Part Numbers Straight Posts Right- Angle Posts Without With Without Wit h Retentive Legs Retentive Legs Retentive Legs Retentive Legs Standard UL94V -0, T in Plated 640456 2–28 644874 2–28 640457 2–28 644875 2–28 Standard UL94V -0, .000030 [0. 00076] Gold Plated 641215 32–58 — — 641216 32–58 — — Standard UL94V -0, .000015 [0. 00038] Gold Plated 641126 32–58 — — 641127 32–58 — — .100 [2.54] Typ. Edge of Board .130 [3.30] Min. .100 [2.54] Typ. Edge of Board X .125 [3.18] Ref. 34 ° .135 [3.43] Ref. 34 ° Retentive Leg Retentive Leg max. when mated with MT A-100 Connector . max. when mated with CST -100 II Connector . Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. .050/.040 [1.27/1.02] Dia. for straight leg headers Dia. for retentive leg headers .037 [0.94 ±.002 ±0.05] .050/.040 [1.27/1.02] Dia. for straight leg headers Dia. for retentive leg headers .037 [0.94 ±.002 ±0.05] Material and Finish Housing—UL94V-0 rated, polyester, white Contacts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641215 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-641215-0 All part numbers are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 641215–2 3-641215–2 thru 28 2-641215-8 5-641215-8 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engi- neer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-100 Headers with Retention Peg—Straight Friction Lock Polarized Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .070 [1.78]Min. Ø .100 [2.54] .090 [2.29] Ø Typ. Square Typ. . 113 [2.87] A .250 [6.35] .025- .040 [0.64-1.01] .070 [1 .78] . 1 3 5 [3.43] . 1 25 [3.1 8] .050 [1 .27] . 1 00 [2.54]Typ. Post No .1 .113 [2.87] A .250 [6.35] .055 [1.39] .055 [1.40].070 [1.78] .135 [3.43] .125 [3.18] .050 [1.27] Typ..100 [2.54] Post No. 1 Min. Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Friction Lock Polari zed Header RoHS Header RoHS Part Nos. Equiv . Part Nos. Equiv . Standard UL94V -0, T in Plated 647609 32-42 647623 32-42 Standard UL94V -0, .000030 [0. 00076] Gold Plated 647626 32-42 647624 32-42 Standard UL94V -0, .000015 [0. 00038] Gold Plated 647627 32-42 647625 32-42 Not e : Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. .347 [8.81 ±.010 ± 0.25] .550 [13.97 ±.010 ± 0.25] .290 [7.37 ±.010 ± 0.25] .347 [8.81 ±.010 ± 0.25] .550 [13.97 ±.010 ± 0.25] .025 [0.64 ±.001 ± 0.03] Square Typ. .025 [0.64 ±.001 ± 0.03] .052 [1.32 ±.002 ± 0.05] .040 [1.02 ±.003 ± 0.07] .290 [7.37 ±.010 ± 0.25] Material and Finish Housing—UL94V-0 rated, thermoplastic, black Contacts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647609 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-647609-0 All part numbers are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 647609-2 3-647609-2 3 647609-3 3-647609-3 4 647609-4 3-647609-4 5 647609-5 3-647609-5 6 647609-6 3-647609-6 7 647609-7 3-647609-7 8 647609-8 3-647609-8 9 647609-9 3-647609-9 10 1-647609-0 4-647609-0 11 1-647609-1 4-647609-1 12 1-647609-2 4-647609-2 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request.

MTA, CST-100 II and SL-156 Connectors MTA-100 High Profile Headers—Right-Angle .250 [6.35] .113 [2.87] A .025 [0.64] Sq. .050 [1.27].100 [2.54] .347 [8.81] .290 [7.37] .112 [2.84] .040 [1.02] Max. .125 [3.18] Post No. 1 .113 [2.87] .025 [0.64] Sq. .100 [2.54] .050 [1.27] Post No. 1 .290 [7.37] .125 [3.18] .070 [1.78] .112 [2.84] .250 .347 [8.81] .140 [3.56] A [6.35] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .100 [2.54]Typ. Dia. Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Friction Lock Polarized Right-Angle Posts Right-Angle Posts Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647630 32-42 647651 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647629 32-42 647653 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647628 32-42 647652 32-42 Friction Lock Right-Angle Post (.025 [0.64] Square) Polarized Right-Angle Post (.025 [0.64] Square) Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. .040 [1.02 ±.003 ± 0.07] Material and Finish Housing—UL94V-0 rated, thermoplastic, black Contacts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. 4. This product can be mounted in the middle of the PC Board as shown in the PCB layout. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with right-angle posts would be: Base number 647630 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-647630-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647630-2 3 3-647630-3 4 3-647630-4 5 3-647630-5 6 3-647630-6 7 3-647630-7 8 3-647630-8 9 3-647630-9 10 4-647630-0 11 4-647630-1 12 4-647630-2 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request.

MTA, CST-100 II and SL-156 Connectors MTA-100 Polarized High Temperature Headers—Straight and Right-Angle Straight Post (. 025 [0. 64] Square) .113 [2.87] A .025 [0.64] Sq. .100 [2.54] .050 [1.27] Post No. 1 .290 [7.37] .135 [3.43] .550 [13.97] .070 [1.78] .125 [3.18] .250 [6.35] .347 [8.81] Right-Angle Post (.025 [0.64] Square) .113 [2.87] .025 [0.64] Sq. .100 [2.54] .050 [1.27] Post No. 1 .290 [7.37] .125 [3.18] .070 [1.78] .112 [2.84] .250 [6.35] .347 [8.81] .140 [3.56] A Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board .300 [7.62] .150 [3.81] .100 [2.54] Typ. .040 [1.02] Pre-Tinned Plated Thru Hole Typ. .060 [1.52] Pre-Tinned Land Both Sides Typ. .008 [0.20] Min. Thk. Solder Paste In Area Shown .065 [1.65] .0325 [0.826] Post No. 1 For use with Infrared Reflow Process Maximum T emperature Rating: 2–12 Position: 280°C 13–18 Position: 235°C Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Straight Posts Straight Posts (T ube Loaded) Right-Angle Posts Header RoHS Header RoHS Header RoHS Standard UL94V -0, T in Plated 647047 32–42 647298 32–42 647048 32–42 Standard UL94V -0, .000030 [0. 00076] Gold Plated 647109 32–42 647300 32–42 647114 32–42 Standard UL94V -0, .000015 [0. 00038] Gold Plated 647075 32–42 647299 32–42 647076 32–42 Not e : Sel e c t l o a d h eader s ( omit ted pin h eade r s ) a r e a v a ilab l e u pon r equ e s t . Ple ase cont a c t p r oduct eng inee r o r p r o d uct m a nag e r f o r details . Material and Finish Housing— 2–12 Position—UL94V-0 rated, nylon, black 13–18 Position—UL94V-0 rated, LCP, black Posts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647047 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-647047-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647047-2 thru 12 4-647047-2 13 NA thru 18 NA See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request.

MTA, CST-100 II and SL-156 Connectors MTA-100 Friction Lock High Temperature Headers—Straight and Right-Angle For use with Infrared Reflow Process Maximum T emperature Rating: 2–12 Position: 280°C 13–18 Position: 235°C Base Part Numbers Straight Posts Straight Posts (T ube Loaded) Right-Angle Posts Header RoHS Header RoHS Header RoHS Standard UL94V -0, T in Plated 647050 32–42 647295 32–42 647051 32–42 Standard UL94V -0, .000030 [0. 00076] Gold Plated 647116 32–42 647297 32–42 647117 32–42 Standard UL94V -0, .000015 [0. 00038] Gold Plated 647078 32–42 647296 32–42 647079 32–42 Not e : Sel e c t l o a d h eader s ( omit ted pin h eade r s ) a r e a v a ilab l e u pon r equ e s t . Ple ase cont a c t p r oduct eng inee r o r p r o d uct m a nag e r f o r details . Straight Post (. 025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board .300 [7.62] .150 [3.81] .100 [2.54] Typ. .040 [1.02] Thru Hole Typ. .060 [1.52] Both Sides Typ. .008 [0.20] Paste In Area Shown Min. Thk. Solder Pre-Tinned Land Pre-Tinned Plated .065 [1.65] .0325 [0.826] Post No. 1 .250 [6.35] .113 [2.87] A .025 [0.64] Sq. .050 [1.27].100 [2.54] .130 [3.30] .550 [13.97] .347 [8.81] .290 [7.37] .040 [1.02] Max. .125 [3.18] Post No. 1 .250 [6.35] .113 [2.87] A .025 Sq. .050 [1.27].100 [2.54] .347 [8.81] .290 [7.37] .112 [2.84] .040 [1.02] Max. .125 [3.18] Post No. 1 Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Material and Finish Housing— 2–12 Position—UL94V-0 rated, nylon, black 13–18 Position—UL94V-0 rated, LCP, black Posts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647050 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-647050-0 All part numbers are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 647050-2 3-647050-2 thru 12 1-647050-2 4-647050-2 13 1-647050-3 NA thru 18 1-647050-8 NA See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request.

MTA, CST-100 II and SL-156 Connectors MTA-100 Polarized and Friction Lock Surface Mount Headers—Straight Polarized Header Friction Lock Header Recommended PC Board Layout for use with .010 [0.25] Thick Stencil .250 [6.35] .318 [8.08] Ref. .113 [2.87] .025 [0.64] Sq. .050 [1.27].100 [2.54] .347 [8.81] .290 [7.37] .070 [1.78] .125 [3.18] .159 [4.04] Typ. Post No. 1 .250 [6.35] .318 [8.08] Ref. .113 [2.87] .025 [0.64] Sq. .050 [1.27].100 [2.54] .347 [8.81] .290 [7.37] .040 [1.02] Max. .125 [3.18] .159 [4.04] Post No. 1 .235 [5.97] .100 [2.54] Typ. .060 [1.52] .070 [1.78] Post No. 1 Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Polarized Headers Friction Lock Headers Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647106 32-42 647166 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647108 32-42 647168 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647107 32-42 647167 32-42 Note: Sel e c t l o a d h eader s ( omit ted pin h eade r s ) a r e a v a ilab l e u pon r equ e s t . Ple ase cont a c t p r oduct eng inee r or pr o d uct m a nag e r f o r details . Tape Mount Part Numbers Polarized Headers Friction Lock Headers Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647531 32-42 647502 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 1744163 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647467 32-42 For use with Infrared Reflow Process Maximum Temperature Rating: 2–12 Position: 280°C 13–18 Position: 235°C Material and Finish Housing— 2–12 Position—UL94V-0 rated, nylon, black 13–18 Position—UL94V-0 rated, LCP, black Posts—Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Note: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position surface mount polarized header would be: Base number 647106 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-647106-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647106-2 12 4-647106-2 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request.

MTA, CST-100 II and SL-156 Connectors MTA-100 Shrouded Headers—Straight and Right-Angle Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square) A .025 [0.64] Typ. .100 [2.54] .092 [2.34] Typ. Ref. Post No. 1 .313 [7.95] .410 [10.41] .140 [3.56] .176 [4.47] Ref. .107 [2.72] Ref. .125 [3.18] .200 [5.08] .440 [11.18] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Sho wn) Polarized Retention Peg .042 [1.07] .100 [2.54] [2.54]Typ. .081/.075 [2.06/1.91] .124 [3.15] Edge of Board .125 [3.18] Min. .050/.040 [1.27/1.02] Dia. Dia. A .025 [0.64] Typ. .100 [2.54] .092 .130 [2.34] Typ. Ref. Post No. 1 .313 [7.95] .410 .200 [10.41] .176 Ref. [3.30] [1.27] [5.08] .050 Max..137 [3.48] Ref. .100 Typ. Edge of Board .300 [7.62] Max. .050/.040 [1.27/1.02] Dia. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Sho wn) Header Length 2 .284 3- -27.21 3 .384 3- -39.75 4 .484 3- -412.29 5 .584 3- -514.83 6 .684 3- -617.37 7 .784 3- -719.91 8 .884 3- -822.45 9 .984 3- -924.99 10 1.084 4- -027.53 11 1.184 4- -130.07 12 1.284 4- -232.61 13 1.384 4- -335.15 14 1.484 4- -437.69 .206 Ref. .130 [3.30] [5.23] Ref. Rear Bend Front Bend Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Straight Posts Right-Angle Posts With Without Without Pegs Only Pegs Pegs Front Bend Rear Bend Standard UL94V-0, Tin Plated 644486 22-34 644861 22-34 644488 22-34 644803 22-34 Standard UL94V-0, .000030 [0.00076] Gold Plated 644487 22-34 — — 644489 22-34 — — Header No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Material and Finish Housing—UL94V-0 rated, polyester, black Posts—Copper alloy, tin plated, .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated post are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 7, 8 and 24. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the head- er. For example, the complete part num- ber for a 10-position header with straight posts and with pegs would be: Base number 644486 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-644486-0 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engi- neering to expedite your request. Notes: 1. Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 2. MTA-100 shrouded headers do not mate with CST-100 II housings. Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square) A .025 [0.64] Typ. .100 [2.54] .092 [2.34] Typ. Ref. Post No. 1 .313 [7.95] .410 [10.41] .140 [3.56] .176 [4.47] Ref. .107 [2.72] Ref. .125 [3.18] .200 [5.08] .440 [11.18] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Sho wn) Polarized Retention Peg .042 [1.07] .100 [2.54] [2.54]Typ. .081/.075 [2.06/1.91] .124 [3.15] Edge of Board .125 [3.18] Min. .050/.040 [1.27/1.02] Dia. Dia. A .025 [0.64] Typ. .100 [2.54] .092 .130 [2.34] Typ. Ref. Post No. 1 .313 [7.95] .410 .200 [10.41] .176 Ref. [3.30] [1.27] [5.08] .050 Max..137 [3.48] Ref. .100 Typ. Edge of Board .300 [7.62] Max. .050/.040 [1.27/1.02] Dia. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Sho wn) Header Length 2 .284 3- -27.21 3 .384 3- -39.75 4 .484 3- -412.29 5 .584 3- -514.83 6 .684 3- -617.37 7 .784 3- -719.91 8 .884 3- -822.45 9 .984 3- -924.99 10 1.084 4- -027.53 11 1.184 4- -130.07 12 1.284 4- -232.61 13 1.384 4- -335.15 14 1.484 4- -437.69 .206 Ref. .130 [3.30] [5.23] Ref. Rear Bend Front Bend Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Straight Posts Right-Angle Posts With Without Without Pegs Only Pegs Pegs Front Bend Rear Bend Standard UL94V-0, Tin Plated 644486 22-34 644861 22-34 644488 22-34 644803 22-34 Standard UL94V-0, .000030 [0.00076] Gold Plated 644487 22-34 — — 644489 22-34 — — Header No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv.

MTA, CST-100 II and SL-156 Connectors PRODUCT FACTS

• Low cost wire-to-board interconnections
• Wide wire range for single contact
• Tin and gold plated contacts
• Mates with specified MTA and similar competitive notched headers
• Plastic latching feature in housing helps prevent contact backout
• Locking ramps and polarizing tabs are standard
• For keying purposes use keying plug 641994-1 (page 10)
• Recognized under the Component Program of Underwriters Labora- tories Inc., File No. E28476
• Certified by Canadian Standards Association, File No. LR7189 For mateability options, see matrix on pages 5 and 6. For mating half visuals, see pages 13 thru 23 and 25. See page 8 for an explanation of RoHS lead free equivalents. Performance Data Voltage Rating—250 vac Current Rating—4 amp max. Low-Level Resistance— 6 mΩ max. initial; 10 mΩ max. initial Dielectric Withstanding Voltage— 750 vac/1 min. Insulation Resistance—1000 MΩ min. initial; 100 MΩ min. final Operating Temperature— -55° C to +105° C Technical Documents Product Specification 108-1948 Application Specifications 114-13036 Instruction Sheet 408-8493 Application Tooling Loose Piece Contacts—Hand Tool No. 58517-3 (408-4064) Strip Contacts—AMP-O-LECTRIC Model “G” Termination Machine* Applicator No. 567373-3 (Request Catalog 65828) AMP-O-MATIC Stripper-Crimper Machine* Applicator No. 567910-1 or 567827-1 (with CQM) (Request Catalog 65004) AMPOMATOR CLS IIIG Lead Making Ma- chine* (Request Catalog 82659) *Requires applicators. For part numbers, call Technical Support. .100 [2.54] Centerline CST-100 II Crimp Contacts and Housings .260 Ref. .510 [12.95] .190 [4.83] [6.60] A .100 [2.54] Typ. .060 Typ. No. of Dim. Part Pos. A Numbers 2 .220 1375820-25.59 3 .320 1375820-38.13 4 .420 1375820-410.67 5 .520 1375820-513.21 6 .620 1375820-615.75 7 .720 1375820-718.29 8 .820 1375820-820.83 9 .920 1375820-923.37 10 1.020 1-1375820-025.91 11 1.120 1-1375820-128.45 12 1.220 1-1375820-230.99 13 1.320 1-1375820-333.53 14 1.420 1-1375820-436.07 15 1.520 1-1375820-538.61 No. of Dim. Part Pos. A Numbers 16 1.620 1-1375820-641.15 17 1.720 1-1375820-743.69 18 1.820 1-1375820-846.23 19 1.920 1-1375820-948.77 20 2.020 2-1375820-051.31 21 2.120 2-1375820-153.85 22 2.220 2-1375820-256.39 23 2.320 2-1375820-358.93 24 2.420 2-1375820-461.47 25 2.520 2-1375820-564.01 26 2.620 2-1375820-666.55 27 2.720 2-1375820-769.09 28 2.820 2-1375820-871.63 Contacts Part Numbers Tin Plated 15 Au Gold Plated 30 Au Gold Plated 1375819-1 (Strip) 1375819-2 (Strip) 1375819-3 (Strip) 1445336-1 (Loose Piece) 1445336-2 (Loose Piece) 1445336-3 (Loose Piece) Material and Finish (RoHS Compliant) Phosph o r b r o n z e , p r e t inne d o r . 0 0 0 0 1 5 [ . 0 0 038 ] g o l d , o v e r nic kel . 0 00030 [ 0 . 0 0076] gol d o v e r n i c k e l Wire Range—22–26 AWG [0.35–0.13 mm 2 ] Housing* Material (RoHS Compliant) UL94V -0 rated, nylon, white .195 [4.95] .440 [11.17] .016±.002 [.406±.051] *Housings without polarizing tabs may be manufactured upon request. Minimums may apply. Contact product engineering or product manager for details.

MTA, CST-100 II and SL-156 Connectors CST-100 II Shrouded Headers—Straight and Right-Angle Material and Finish Housing—UL94V-0 rated, polyester, black Posts—Copper alloy, tin plated, or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated post are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. For mateability options, see matrix on pages 5 and 6. For mating half visuals, see page 23. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and with pegs would be: Base number 644893 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-644893-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644893-2 thru 14 4-644893-4 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: CST-100 II shrouded headers only mate with CST-100 II housings. All the MTA-100 headers except the MTA-100 shrouded headers mate with CST-100 II housings. Base Part Numbers Straight Posts With Without Right-Angle Posts Pegs Pegs Without Pegs Only Header No. of Header No. of Header No. of Part Nos. Posts/ Part Nos. Posts/ Part Nos. Posts/ RoHS Equiv. RoHS Equiv. RoHS Equiv. Standard UL94V-0, Tin Plated 644893 32-44 644892 32-44 644894 32-44 Standard UL94V-0, .000030 [0.00076] Gold Plated 644897 32-44 644896 32-44 644898 32-44 Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square) A .025 [0.64] Typ. .100 [2.54] .092 [2.34] Ref. Post No. 1 .313 [7.95] .410 [10.41] .140 [3.56] .176 [4.47] Ref. .107 [2.72] Ref. .125 [3.18] .280 [7.11] .520 [13.21] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) .042 [1.07] .100 [2.54] Typ. .081/.075 [2.06/1.91] .124 [3.15] Edge of Board .125 [3.18] Min. .050/.040 [1.27/1.02] Dia. Dia. A .025 [0.64] Typ. .100 [2.54] .036 [0.91] Max. .092 [2.34] Typ. Post No. 1 .313 .280 .176.107 [7.95] [4.47] Ref. [2.72] Ref. .140 [3.56] [7.11] .100 [2.54] Typ. Edge of Board .450 [11.43] Max. .050/.040 [1.27/1.02] Dia. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Header Length No. of Dim. Prefix/ Circuits A Suffix No. of Dim. Prefix/ Circuits A Suffix No. of Dim. Prefix/ Circuits A Suffix 2 .284 3- -27.21 3 .384 3- -39.75 4 .484 3- -412.29 5 .584 3- -514.83 6 .684 3- -617.37 7 .784 3- -719.91 8 .884 3- -822.45 9 .984 3- -924.99 10 1.084 4- -027.53 Note: Consult Product Drawing for details on placing headers onto PC boards. Polarized Retention Peg

MTA, CST-100 II and SL-156 Connectors PRODUCT FACTS

• Connectors and headers for 2 through 24 positions; wire sizes of 18, 20, 22, 24 and 26 AWG [0.9–0.12 mm2]
• Connectors and headers, except shrouded headers, are end-to-end stackable
• Posted connectors for 2,3, 4, 6, 9, 12, 15 and 24 positions
• Card edge connectors for 3, 6, 9, 12, 15, 18 and 20 through 24 positions
• Connectors preloaded with IDC contacts
• All contacts are slotted for insulation displacement (IDC) termination tech- nique
• Connector styles include both closed end and feedthru, with and without locking ramps and polarizing tabs
• Molded ribs on housing do not allow reverse mating
• Contacts are lubricated for fretting corrosion protection
• Benefits derived from the MTA-156 system include increases quality and ease of handling such as—
• One-step assembly
• No wire stripping
• No contact damage
• Reduced wiring errors
• Simpler tooling
• Simple maintenance and repair
• Meets the material requirements of Table 23.1 of UL1410 Standards for Television Receiver and Video Products (wire-to post connectors only)
• Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476
• Certified by Canadian Standards Association, File No. LR7189 MTA-156 connectors accept discrete and ribbon cable wire sizes ranging from 18– 26 AWG [0.9–0.12 mm2] with maximum insulation outside diameter .095 [2.41] for single wire and .070 [1.78] for mass termination of wires. Tin plated solid, fused stranded or stranded (7, 16, and 19 strands) wire with PVC insulation can be used on 18 AWG [0.8–0.9 mm2] MTA-156 connectors; 7, 10, and 19 stranded wire on 20 AWG [0.5–0.6 mm2] MTA-156 connec- tors; and 7 and 19 stranded wire on 22–26 AWG [0.4–0.12 mm2] MTA-156 connectors. Only one wire to be terminated into an IDC contact slot. Mass termination of wire provides the lowest applied cost because it drastically reduces the labor content of virtually any cable or harness assembly required. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .156 [3.96] centerline headers completes the system. Headers are avail- able with straight or right-angle posts, in flat friction lock and shrouded styles. Headers are available in 2 through 24 positions. Note: Refer to page 52 for approved wire listings. Performance Data* Voltage Rating—600 vac Current Rating—7 amp max. for MTA-156 Connector Low-Level Resistance— 3.0 mΩ max. initial Dielectric Withstanding Voltage— 2200 vac/1 min. Insulation Resistance— 5000 MΩ min. initial Operating Temperature— -55° C to +105° C *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. Technical Documents Product Specification 108-1051 MTA-156 Connectors Application Specifications 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors 114-1032 MTA-156 Ribbon Cable Assembly .156 [3.96] Centerline MTA-156 IDC Connectors and Headers

MTA, CST-100 II and SL-156 Connectors Connectors

640426 YYYNYYYYYYYYYY

640427 YYYNYYYYYYYYYY

640428 YYYNYYYYYYYYYY

640429 YYYNYYYYYYYYYY

640430 YYYNYYYYYYYYYY

640431 YYYYYYYYYYYYYY

640432 YYYYYYYYYYYYYY

640433 YYYYYYYYYYYYYY

640434 YYYYYYYYYYYYYY

640435 YYYYYYYYYYYYYY

640472 YYYNYYYYYYYYYY

640473 YYYNYYYYYYYYYY

640474 YYYNYYYYYYYYYY

640477 YYYYYYYYYYYYYY

640480 YYYYYYYYYYYYYY

640595 YYYNYYYYYYYYYY

640599 YYYNYYYYYYYYYY

640600 YYYNYYYYYYYYYY

640601 YYYNYYYYYYYYYY

640602 YYYNYYYYYYYYYY

640604 YYYYYYYYYYYYYY

640605 YYYYYYYYYYYYYY

640606 YYYYYYYYYYYYYY

640607 YYYYYYYYYYYYYY

640608 YYYYYYYYYYYYYY

641302 YYYNYYYYYYYYYY

643817 YYYNYYYYYYYYYY

643818 YYYNYYYYYYYYYY

643819 YYYNYYYYYYYYYY

643820 YYYNYYYYYYYYYY

643821 YYYNYYYYYYYYYY

644082 YYYYYYYYYYYYYY

644461 YYYYYYYYYYYYYY

644462 YYYYYYYYYYYYYY

644463 YYYYYYYYYYYYYY

644464 YYYYYYYYYYYYYY

644465 YYYNYYYYYYYYYY

644466 YYYNYYYYYYYYYY

644467 YYYNYYYYYYYYYY

644468 YYYNYYYYYYYYYY

644469 YYYYYYYYYYYYYY

644470 YYYYYYYYYYYYYY

644471 YYYYYYYYYYYYYY

644501 YYYYYYYYYYYYYY

644502 YYYYYYYYYYYYYY

644566 YYYYYYYYYYYYYY

644570 YYYYYYYYYYYYYY

644783 YYYNYYYYYYYYYY

644791 YYYYYYYYYYYYYY

644860 YYYNYYYYYYYYYY

644878 YYYNYYYYYYYYYY

6403836403846403856403876403886403896404456446116446136446156446176447496447506447516447526447536447546447556471236471256471276476461744017 Headers Matrix for Tin Plated Part Numbers MTA-156 Connector/Header Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connec- tor combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.

MTA, CST-100 II and SL-156 Connectors MTA-156 Connector/Header Mateability Guide (continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connec- tor combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers 644763 Headers 641202641203641204641207641208641209641210644631644633644756644759644760644761

641217 YYYNYYYYYYYYY

641218 YYYNYYYYYYYYY

641219 YYYNYYYYYYYYY

641220 YYYNYYYYYYYYY

641222 YYYYYYYYYYYYY

641223 YYYYYYYYYYYYY

641224 YYYYYYYYYYYYY

641226 YYYYYYYYYYYYY

641227 YYYNYYYYYYYYY

641228 YYYNYYYYYYYYY

641229 YYYNYYYYYYYYY

641230 YYYNYYYYYYYYY

641235 YYYYYYYYYYYYY

644460 YYYNYYYYYYYYY

644662 YYYNYYYYYYYYY

644663 YYYNYYYYYYYYY

644718 YYYNYYYYYYYYY

644720 YYYNYYYYYYYYY

641113641119641120641121644766644767644768644769 Connectors

641148 YYYYYYYN

641149 YYYYYYYN

641150 YYYYYYYN

641151 YYYYYYYN

641168 YYYYYYYN

641170 YYYYYYYN

641175 YYYYYYYY

644284 YYYYYYYN

647478 YYYYYYYN

647479 YYYYYYYN

MTA, CST-100 II and SL-156 Connectors Material and Finish Housing—UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts—Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Color Coding by Wire Size for UL94V-2 Connectors

20 AWG—Yellow

18 AWG—Orange

All wire sizes in UL94V-0—Black Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 38. 2. Refer to pages 52-56 for approved wire listing. 3. For strain reliefs and dust covers, see page 9. 4. For keying plugs and panel mount end caps, see page 35. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying purposes. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inch [39.62 mm]. MTA-156 IDC Connectors—Closed End Closed End with Locking Ramp Closed End without Locking Ramp without Polarizing Tabs with Polarizing Tabs without Polarizing Tabs with Polarizing Tabs .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26].355 [9.02] .230 [5.84] .156 [3.96]Typ. A .050 [1.27] [2.46] .100 [2.54] .258 [6.56] .050 [1.27] .725 [18.42] .245 [6.22] .325 [8.26].355 [9.02] .180 [4.57] .050 [1.27] .156 .047 .097 [3.96]Typ. A [1.19] .100 [2.54] .258 [6.56] .050 [1.27] For mateability options, see matrix on pages 27 and 28. Mating half visuals for Closed End Connectors with Locking Ramp, see pages 38 thru 41, 43, 45, and 46, (42 and 44 Front Bend Headers only). For mateability options, see matrix on pages 27 and 28. Mating half visuals for Closed End Connectors without Locking Ramp, see pages 39 thru 46.

MTA, CST-100 II and SL-156 Connectors MTA-156 IDC Connectors—Closed End (continued) Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 640426 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-640426-0 All part numbers bold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640426-2 3 3-640426-3 4 3-640426-4 5 3-640426-5 6 3-640426-6 7 3-640426-7 8 3-640426-8 9 3-640426-9 10 4-640426-0 11 4-640426-1 12 4-640426-2 13 4-640426-3 14 4-640426-4 15 4-640426-5 16 4-640426-6 17 4-640426-7 18 4-640426-8 19 4-640426-9 20 5-640426-0 21 5-640426-1 22 5-640426-2 23 5-640426-3 24 5-640426-4 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Base Part Numbers Closed End with Locking Ramp Closed End without Locking Ramp Without T abs With T abs Without T abs With T abs Connector T ype Connector Connector Connector Connector& Wir e Size Standard UL94V -2, T in Plated

18 A WG 640426 32–54 643817 32–54 640431 32–54 644461

32–440.8–0.9 mm 2

20 A WG 640427 32–54 643818 32–54 640432 32–54 644462

32–440.5–0.6 mm 2

22 A WG 640428 32–54 643819 32–54 640433 32–54 644463

32–440.3–0.4 mm 2

24 A WG 640429 32–54 643820 32–54 640434 32–54 644464

32–440.2 mm 2 26 A WG 640430 32–54 643821 32–54 640435 32–54 — —0.12–0.15 mm 2 T ape Mounted on Reel UL94V -2, T in Plated 18 A WG 644878 32–54 640477 32–54 — —0.8–0.9 mm 2

20 A WG 640473 32–54

640472 32–54

22 A WG 640474 32–54 644783 32–54 644791

32–440.3–0.4 mm 2 24 A WG — — — — 640480 32–54 — —0.2 mm 2 Standard UL94V -2, .000030 [0. 00076] Gold Plated

18 A WG 641217 32–54 644460

32–42 641222 32–54 — —0.8–0.9 mm 2

20 A WG 641218 32–54 644663

32–42 641223 32–54 — —0.5–0.6 mm 2

22 A WG 641219 32–54 644662

32–42 641224 32–54 644687 32–440.3–0.4 mm 2 24 A WG 641220 32–54 — — 641225 32–54 — —0.2 mm 2 26 A WG 641221 32–54 — — 641226 32–54 — —0.12–0.15 mm 2 Standard UL94V -2, .000015 [0. 00038] Gold Plated

18 A WG 641148 32–54 644284

32–42 641153 32–54 — —0.8–0.9 mm 2 20 A WG 641149 32–54 — — 641154 32–54 — —0.5–0.6 mm 2

22 A WG 641150 32–54 647478

32–42 641155 32–54 — —0.3–0.4 mm 2 24 A WG 641151 32–54 — — 641156 32–54 — —0.2 mm 2 26 A WG 641152 32–54 — — 641157 32–54 — —0.12–0.15 mm 2 Standard UL94V -0, T in Plated (Black in color)

18 A WG 644860

32–42 — — 644502 32–42 644082 32–420.8–0.9 mm 2

22 A WG — — — — 644501

32–42 644566 32–420.3–0.4 mm 2 1 Othe r circuit siz es are a v ailab le upon request. Minim ums ma y apply . Note: Blocked circuit configur ations are a v ailab le upon request. Contact product engineer or product manager f ordetails . Minim ums ma y apply . Part RoHS Part RoHS Part RoHS Part RoHS — — — —

MTA, CST-100 II and SL-156 Connectors Material and Finish Housing—UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts—Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold-plated over nickel Color Coding by Wire Size for UL94V-2 Connectors All wire sizes in UL94V-0—Black Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 38. 2. Refer to pages 52-56 for approved wire listing. 3. For strain reliefs and dust covers, see page 33 and 34. 4. For keying plugs and panel mount end caps, see page 35. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying purposes. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inch [39.62 mm]. MTA-156 IDC Connectors—Feed-Thru Feed-Thru with Locking Ramp Feed-Thru without Locking Ramp without Polarizing Tabs with Polarizing Tabs without Polarizing Tabs with Polarizing Tabs .725 [18.42] .245 [6.22] .325 [8.26] .385 [9.78] .180 [4.57] .156 [3.96] Typ. A .050 [1.27] [1.19] .258 .047 .097 [6.56] .050 [1.27] .100 [2.54] .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26] .385 [9.78] .230 [5.84] .156 [3.96]Typ. A .050 [1.27] [2.46] .100 [2.54] .258 [6.56] .050 [1.27] For mateability options, see matrix on pages 27 and 28. Mating half visuals for Closed End Connectors with Locking Ramp, see pages 38 thru 41, 43, 45, and 46, (42 and 44 Front Bend Headers only). For mateability options, see matrix on pages 27 and 28. Mating half visuals for Closed End Connectors without Locking Ramp, see pages 39 thru 46.

MTA, CST-100 II and SL-156 Connectors MTA-156 IDC Connectors—Feed-Thru (continued) Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position feed-thru connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 640599 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-640599-0 All part numbers bold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640599-2 3 3-640599-3 4 3-640599-4 5 3-640599-5 6 3-640599-6 7 3-640599-7 8 3-640599 -8 9 3-640599-9 10 4-640599-0 11 4-640599-1 12 4-640599-2 13 4-640599-3 14 4-640599-4 15 4-640599-5 16 4-640599-6 17 4-640599-7 18 4-640599-8 19 4-640599-9 20 5-640599-0 21 5-640599-1 22 5-640599-2 23 5-640599-3 24 5-640599-4 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Base Part Numbers Feed-Thru with Locki ng Ramp Feed-Thru without Locking Ramp Without T abs With T abs Without T abs With T abs Standard UL94V -2, T in Plated

18 A WG 640599 32–54 644465

32–44 640604 32–54 644469 32–440.8–0.9 mm 2

20 A WG 640600 32–54 644466

32–44 640605 32–54 644470 32–440.5–0.6 mm 2

22 A WG 640601 32–54 644467

32–44 640606 32–54 644471 32–440.3–0.4 mm 2

24 A WG 640602 32–54 644468

32–44 640607 32–540.2 mm 2

26 A WG 640595 32–54 — — 640608 32–54 — —

— — 0.12–0.15 mm 2 T ape Mounted on Reel UL94V -2, T in Plated 18 A WG 641302 32–54 — — — —0.8–0.9 mm 2 24 A WG — — — —0.2 mm 2

26 A WG — —

— — — — — — — — — — — — — — — — — — — — — — — —0.12–0.15 mm 2 Standard UL94V -2, .00003 [. 00076] Gold Plated

18 A WG 644718

32–44 641232 32–54 — —0.8–0.9 mm 2 20 A WG — — 641233 32–54 — —0.5–0.6 mm 2

22 A WG 644720

32–44 641234 32–54 — —0.3–0.4 mm 2 24 A WG — — 641235 32–54 — —0.2 mm 2 26 A WG 641231 32–54 — — 641236 32–54 — —0.12–0.15 mm 2 Standard UL94V -2, .000015 [. 00038] Gold Plated

18 A WG 641168 32–54 647479

22 A WG 641170 32–54 647496

32–42 641175 32–54 — —0.3–0.4 mm 2 24 A WG — — — —0.2 mm 2

26 A WG — — — —

— —— — — — — — — — — — — — — — — — — — — — 0.12–0.15 mm 2 Standard UL94V -0, T in Plated

18 A WG — — — — 644570

32–420.8–0.9 mm 2 1 Othe r circuit siz es are a v ailab le upon request. Minim ums ma y apply . Note: Blocked circuit configur ations are a v ailab le upon request. Contact product engineer or product manager f or details . Minim ums ma y apply . Connector T ype Connector Connector Connector Connector& Wir e Size Part RoHS Part RoHS Part RoHS Part RoHS

MTA, CST-100 II and SL-156 Connectors MTA-156 Connector Accessories Covers Material (RoHS Compliant) Strain Relief Covers—UL94V-2 rated, nylon, white Dust Covers—UL94V-0 rated, polyester, white Feed-Thru Covers Material (RoHS Compliant) Strain Relief Cover—UL94V-2 rated, nylon, white Dust Covers—UL94V-0 rated, polyester, white Cover Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed-end strain relief cover would be: Base number 643067 plus prefix-and-suffix 1- — -0 The correct ordering number is 1-643067-0 A .130 [3.30] [2.67][11.18] .335 [8.51] Retention Dimple .127 [3.23] .440 .440 .105 .130 .475 .325 [11.18] A .335 [8.51] Strain Relief Covers Dust Covers Base Part Numbers Closed End Strain Relief Dust Covers Covers Cover Part Nos. No. of Circuits Cover Part Nos. No. of Circuits 643067 2–24 640551 2–24 Cover Part Nos. No. of Circuits Cover Part Nos. No. of Circuits Cover Length No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix No. of Circuits Dim. A Prefix/ Suffix 2 .312 -27.92 3 .468 -311.89 4 .624 -415.85 5 .780 -519.81 6 .936 -623.77 7 1.092 -727.74 8 1.248 -831.7 9 1.404 -935.66 10 1.560 1- -039.62 11 1.716 1- -143.59 12 1.872 1- -247.55 13 2.028 1- -351.51 14 2.184 1- -455.47 15 2.340 1- -559.44 16 2.496 1- -663.4 17 2.652 1- -767.36 18 2.808 1- -871.32 19 2.964 1- -975.29 20 3.120 2- -079.25 21 3.276 2- -183.21 22 3.432 2- -287.17 23 3.588 2- -391.14 24 3.744 2- -495.1 Strain Relief Covers Dust Covers .127 [3.23] .470 [11.94] Note: This portion of front locking bar may or may not be present Note: This portion of front locking bar may or may not be present A A [8.26][12.07] [3.3] Retention Dimple Base Part Numbers Feed-Thru Strain Relief Dust Covers Covers 643071 2–24 640643 2–24

MTA, CST-100 II and SL-156 Connectors Replacement IDC Contacts Material and Finish Contacts—Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Notes: TE does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. Crimp Snap-in Contacts Material and Finish Contacts—Phosphor bronze, tin plated MTA-156 Connector Accessories (continued) .110 [2.79] .105 [2.67] .580 [14.73] .165 [4.19] Max. Wire Size Part Nos. AWG mm2 Loose Piece* Strip** 26–22 .12–0.3 640557-3 640556-3 22–18 0.3–0.9 640559-3 640558-3 * *Hand T ool No . 59837-1 (408-6528) **AMP-O-LECTRIC Model “G” T er mination Machine (Request Catalog 65828) Note: Requires applicator . F or par t n umber , call T echnical Suppor t. Special applications f or cr imp snap-in contacts are: 1. Doub le wire per contact 2. Coax or shielded wire 3. Mix ed wire siz e in same connector Note: Only one cr imp snap-in contact per connector . Wire Size Part Numbers AWG mm 2 18 0.8–0.9 640631-3 641143-4 641143-3 20 0.5–0.6 640632-3 641144-4 641144-3 22 0.3–0.4 640633-3 641145-4 641145-3 24 0.2 640634-3 641146-4 641146-3 26 0.12–0.15 640635-3 641147-4 641147-3 .637 [16.18] .125 [3.18] .000030 [0.00076] Gold PlatedTin Plated .000015 [0.00038] Gold Plated

MTA, CST-100 II and SL-156 Connectors MTA-156 Connector Accessories (continued) Keying Plugs Material (RoHS Compliant) UL94V-2 rated, nylon, natural color Note: Removal of contact is not necessary when using keying plug. Panel Mount End Caps Part No. 641440-1 Part No. 641533-1 (2-position only) Material (RoHS Compliant) UL94V-2 rated, nylon, black Notes: 1. Both left-hand and right-hand end caps are attached by a connecting tab. This tab must be broken off prior to installing on connector. 2. For best results attach panel mount end caps to the MTA-156 (IDC) connectors shown on pages 29 thru 32. While not preferred, panel mount end caps can be attached to MTA-156 (IDC) posted connec- tor on page 38. No. of Dim. Pos. A 3 .736 18.69 4 .892 22.66 6 1.204 30.58 9 1.672 42.47 12 2.140 54.36 15 2.608 66.24 24 4.012 101.9 .375 [9.52] .300 [7.62] .065 [1.65] .051 [1.30] .066 [1.68] .070 [1.78]Dia. .300 [7.62] .085 [2.16] .065 [1.65] .051 [1.30] .066 [1.68] .453 [11.5] .578 [14.7] .010 [.254] Loose Piece Part No. 640629-1 (Flush) Used with keyed headers On Carrier Strip Part No. 641623-1 (Flush) (10 per strip) Long Nose Flush .125 [3.18] .500 Ref. 2.525 [64.14] Ref. .300 Ref. .440 [11.18] .520 [13.2] .410 [10.41] .550 [13.97] Two-Position Only 641533-1 3- thru 24-Position 641440-1 See Note 1 .453 [11.5] A .010 [.254] Max. R. Typ. at Min. Tolerance Cutout Max. R. Typ. at Min. Tolerance Cutout Recommended Panel Cutout .564 .520 [14.33] [13.2] .440 [11.18] Part No. 640630-1 (Long Nose) Used with staked post Pantone CG 9Pantone 144Pantone 3015 100% 100% 100%

MTA, CST-100 II and SL-156 Connectors Posted Connectors Connectors

640426 YYYYYYYYY

640427 YYYYYYYYY

640428 YYYYYYYYY

640429 YYYYYYYYY

640430 YYYYYYYYY

640431 NNNNNNNNN

640432 NNNNNNNNN

640433 NNNNNNNNN

640434 NNNNNNNNN

640435 NNNNNNNNN

640472 YYYYYYYYY

640473 YYYYYYYYY

640474 YYYYYYYYY

640477 NNNNNNNNN

640480 NNNNNNNNN

640595 YYYYYYYYY

640599 YYYYYYYYY

640600 YYYYYYYYY

640601 YYYYYYYYY

640602 YYYYYYYYY

640604 NNNNNNNNN

640605 NNNNNNNNN

640606 NNNNNNNNN

640607 NNNNNNNNN

640608 NNNNNNNNN

641302 YYYYYYYYY

643817 NNNNNNNNN

643818 NNNNNNNNN

643819 NNNNNNNNN

643820 NNNNNNNNN

643821 NNNNNNNNN

644082 NNNNNNNNN

644461 NNNNNNNNN

644462 NNNNNNNNN

644463 NNNNNNNNN

644464 NNNNNNNNN

644465 NNNNNNNNN

644466 NNNNNNNNN

644467 NNNNNNNNN

644468 NNNNNNNNN

644469 NNNNNNNNN

644470 NNNNNNNNN

644471 NNNNNNNNN

644501 NNNNNNNNN

644502 NNNNNNNNN

644566 NNNNNNNNN

644570 NNNNNNNNN

644783 NNNNNNNNN

644791 NNNNNNNNN

644860 YYYYYYYYY

644878 NNNNNNNNN

641435641436641437641438641439641522641523641524641525 Matrix for Tin Plated Part Numbers MTA-156 Posted Connector/Connector Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted connector and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combina- tion is not acceptable for mating.

MTA, CST-100 II and SL-156 Connectors MTA-156 Posted Connector/Connector Mateability Guide (continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted connector and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combina- tion is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers Posted Connectors Posted Connectors 644807644809644812644814

641217 Y YYY

641218 Y YYY

641219 Y YYY

641220 Y YYY

641222 NNNN

641223 NNNN

641224 NNNN

641226 NNNN

641227 Y YYY

641228 Y YYY

641229 Y YYY

641230 Y YYY

641235 NNNN

644460 NNNN

644662 NNNN

644663 NNNN

644718 NNNN

644720 NNNN

641148 Y YY

641149 Y YY

641150 Y YY

641151 Y YY

641168 Y YY

641170 Y YY

641175 NNN

644284 NNN

647478 NNN

647479 NNN

MTA, CST-100 II and SL-156 Connectors MTA-156 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru Closed End Feed-Thru .840 [21.34] .126 [3.2 0 ] .100 [2. 5 4] .045 [1.14] Sq . 9 1.560 1.408 -939.62 35.76 12 2.028 1.876 1- -251.51 47.65 15 2.496 2.344 1- -563.40 59.54 24 3.900 3.748 2- -499.06 95.20 No. of Dim. Prefix/ Circuits A B Suffix 123 4 A Dim. .045 [1.14] Sq. .370 [9.4] .105 [2.67] .355 [9.02] .487 [12.37] Ref. 1.010 [25.65] B Dim. .156 [3.96] ±.010 [± 0.25] A Dim. .045 [1.14] Sq. [9.4] [2.67] .385 [9.78] [12.37] .487 Ref. [25.65] B Dim. .156 .105 .370 1.010 [3.96] ±.010 [± 0.25] Wire Size Part AWG mm2 Numbers 18 0.8-0.9 3-641425-1 20 0.5-0.6 3-641426-1 22 0.3-0.4 3-641427-1 24 0.2 3-641428-1 26 0.12-0. 15 3-641429-1 Technical Documents Product Specification 108-1065 MT A-156 Posted Connector Application Specification 114-1020 MT A-156 Connectors, Posted Connectors and Card Edge Connectors Replacement IDC Contacts Material and Finish Contacts — Copper alloy , post tin plated over nickel Base Part Numbers Connector Type Closed End Connector1 Feed-Thru Connector1 & Wire Size Part Nos. RoHS Equiv. Part Nos. RoHS Equiv. Standard UL 94V-2, Tin Plated 18 AWG 641435 32,33,34,36,39,42,45,54 641522 32,33,34,36,39,42,45,540.8-0.9 mm 2 20 AWG 641436 32,33,34,36,39,42,45,54 641523 32,33,34,36,39,42,45,540.5-0.6 mm 2 22 AWG 641437 32,33,34,36,39,42,45,54 641524 32,33,34,36,39,42,45,540.3-0.4 mm 2 24 AWG 641438 32,33,34,36,39,42,45,54 641525 32,33,34,36,39,42,45,540.2 mm 2 26 AWG 641439 32,33,34,36,39,42,45,54 641526 32,33,34,36,39,42,45,540.12-0.15 mm 2 Standard UL 94V-2, .000030 [0.00076] Gold Plated 18 AWG 644807 32,33,34,36,39,42,45,54 644812 32,33,34,36,39,42,45,540.8-0.9 mm 2 20 AWG — 2 — — 2 —0.5-0.6 mm 2 22 AWG 644809 32,33,34,36,39,42,45,54 644814 32,33,34,36,39,42,45,540.3-0.4 mm 2 24 AWG — 2 — — 2 —0.2 mm 2 26 AWG — 2 — — 2 —0.12-0.15 mm 2 Standard UL 94V-2, .000015 [0.00038] Gold Plated 18 AWG 647476 32,33,34,36,39,42,45,54 647481 32,33,34,36,39,42,45,540.8-0.9 mm 2 22 AWG 643995 32,33,34,36,39,42,45,54 647497 32,33,34,36,39,42,45,540.3-0.4 mm 2

1 MT A-156 P osted Connectors (Closed End and F eed-Thr u) will Only mate with MT A-156 connectors with

locking ramp and without polar izing tabs. The y will NOT mate with MT A-156 Quad Connectors . 2 P ar t s can be made a v ailab le upon request. Minim ums ma y apply . No. of Dim. Circuits A B Suffix 2 .468 .316 -211.89 8.03 3 .624 .472 -315.85 11.99 4 .780 .628 -419.81 15.95 6 1.092 .940 -627.74 23.88 Material and Finish Housing—UL94V-2 rated, nylon, see chart for color Contacts—Copper alloy, post tin or .000030 [.00076] gold plated over nickel Note: 1. Mating half visuals — pages 29 & 32. 2. Strain relief & dust covers — pages 33 & 34. 3. Approved wire listing — page 52. Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector for 18 AWG wire would be: Base number 641435 plus prefix-and-suffix 4- — -2 The correct ordering number is 4-641435-2 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Color Coding by Wire Size for UL94V-2 Connectors Voltage Rating—600 vac Current Rating—7 amp max. Low-Level Resistance—7 mΩ max. initial Dielectric Withstanding Voltage— 1500 vac/1 min. Insulation Resistance—5000 MΩ min. initial Operating Temperature—-55° C to +105° C

MTA, CST-100 II and SL-156 Connectors MTA-156 Flat Headers—Straight Material and Finish Housing—UL94V-0 rated, polyester, white Posts—Copper alloy, tin plated .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick print- ed circuit boards. 4. To determine header overall length (Dim. A), mul- tiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 27, 28, and 47. For mating half visuals, see pages 29 thru 32, 49 and 51. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 640383 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-640383-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640383-2 thru 24 5-640383-4 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or prod- uct manager for details. .250 [6.35] A .045 [1.14] .156 [3.96] [1.98] Typ..078 Typ. .400 [10.16] .125 [3.18] Solder Tail Length (See Chart) .156 [3.96] Edge of Board.140 [3.56] Min. .125 [3.18] Post No. 1 Ref. Recommended Mounti ng Hole Patter n for .062 [1.57] Thk. PC Board Base Part Numbers Square Posts Round Posts Solder tail Solder tail Solder tail Solder tail Standard UL94V -0, T in Plated 640383 2–24 644749 2–24 640384 2–24 644750 2–24 Standard UL94V -0, .000030 [0. 00076] Gold Plated 641202 32–54 644756 32–54 641203 32–54 Standard UL94V -0, .000015 [0. 00038] Gold Plated 641113 32–54 644763 32–54 PC Board Hole Diameters Square Round Post Post .080/.070 070/.060 PC Board Hole Diameters Square Round Post Post Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. — — — —— —

MTA, CST-100 II and SL-156 Connectors MTA-156 Flat Headers—Right-Angle Material and Finish Housing—UL94V-0 rated, polyester, white Posts—Copper alloy, tin plated .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick print- ed circuit boards. 4. To determine header overall length (Dim. A), mul- tiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 27, 28, and 47. For mating half visuals, see pages 29 thru 32, 49 and 51. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641204 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-641204-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-641204-2 thru 24 5-641204-4 See page 8 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or prod- uct manager for details. Edge of Board .156 [3.96] [1.60 ±0.05] Y Ø . 063 ± .002 .125 [3.18] A A .045 [1.14] Sq. .156 [3.96] Typ. .078 [1.98] Typ. .250 [6.35] .156 [3.96] .080/.070 [2.03/1.78] Solder tail Length (See Chart) .390 [9.91] Edge of Board X Post No. 1 .125 [3.18] .100 [2.54] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .063[1.60] Thk. PC Board for Retentive Leg Header MT A Connector . when mated with MT A Connector . X = .140 [3.56] Min. when mated with SL-156 Wir e-to-Board Connector . Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Square Posts Retentive Leg .125 [3.18] Solder tail .175 [4.45] Solder tail Standard UL94V -0, T in Plated 647646 2–12 640385 2–24 644751 2–24 Standard UL94V -0, .000030 [0. 00076] Gold Plated — — — — — —— — 641204 32–54 Standard UL94V -0, .000015 [0. 00038] Gold Plated — — .390 ±.015 [9.91 ±0.38 ] . 1 2 5 [ 3 .1 8] 1 6 ° Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Typ. Typ.

MTA, CST-100 II and SL-156 Connectors MTA-156 Friction Lock Headers—Straight Material and Finish Housing—UL94V-0 rated, polyester, white Posts—Copper alloy, tin plated .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick print- ed circuit boards. 4. To determine header overall length (Dim. A), mul- tiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 27, 28, and 47. For mating half visuals, use connectors with a locking ramp for polarization/re- tention purposes, see pages 29 thru 32, 48, 53 and 55. For polarizing purposes only use connec- tors without a locking ramp. See pages 29 thru 32, 49 and 51. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641208 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-641208-0 All part numbers in bold face are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 641208-2 3-641208-2 thru 24 2-641208-4 5-641208-4 See page 8 for an explanation of RoHS lead free equivalents. .156 [3.96] .125 [3.18] .450 .425 [11.43] Solder tail Length (See Chart) .300 [7.62] A .156 [3.96] .045 [1.14] .180 [4.57] .078 [1.98] Post No. 1 .175 [4.45] Min. Edge of Board Y [10.8] Ref. Typ. Typ. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board position tin plated and 2–24 position gold plated headers . Y = .073 [1.85] 9-24 position tin plated headers . PC Board Hole Diameters Square Round Post Post Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Square Posts Round Posts Leg Solder tail Solder tail Solder tail Solder tail Standard UL94V -0, T in Plated 1744017 2 640445 2–24 644752 2–24 640388 2–24 644753 2–24 Standard UL94V -0, .000030 [0. 00076] Gold Plated — — 641208 32–54 644759 32–54 641209 32–54 644760 32–54 Standard UL94V -0, .000015 [0. 00038] Gold Plated — — 641119 32–54 644766 32–54 641120 32–54 644767 32–54 .068 [1.7] .400 [10.16] 16° ± 3° Retentive Leg Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-156 Friction Lock Headers—Right-Angle Material and Finish Housing—UL94V-0 rated, polyester, white Posts—Copper alloy, tin plated .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick print- ed circuit boards. 4. To determine header overall length (Dim. A), mul- tiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 27, 28, and 47. When using Front Bend Headers—for mating half visuals use connectors with a locking ramp for polarization/ reten- tion purposes. When using Rear Bend Headers—for mating half visuals use connectors without a locking ramp. For polarization purposes only see pages 29 thru 32, 49 and 51. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts, front bend, and a .125 [3.18] solder tail length would be: Base number 641210 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-641210-0 All part numbers in bold face are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 641210-2 3-641210-2 thru 24 2-641210-4 5-641210-4 See page 8 for an explanation of RoHS lead free equivalents. .125 [3.18] .450 [11.43] .212 [5.38] .425 .425 .157 [10.8] .156 [3.96] Y.045 [1.14] Sq. .180 [4.57] A .300 [7.62] .078 [1.98] Typ. Typ. .156 [3.96] .080/.070 [2.03/1.78] Edge of Board Post No. 1 X Solder tail Length (See Chart) [10.8] [3.99] Y Recomme nded Mounting Hole Pattern for .062 [1.57] Thk. PC Board Front Bend Max., when mated with MT A Connector . Max., when mated with SL-15 6 Connector . Rear Bend Max., when mated with MT A Connector . X = .500 [12.7] Min., when mated with SL-156 Connecto r . position tin plated and 2–24 position gold plated headers . Y = .073 [1.85] 9-24 position tin plated headers . Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Square Posts Front Bend Rear Bend Solder tail Solder tail Solder tail Solder tail Standard UL94V -0, T in Plated 640389 2–24 644754 2–24 640387 2–24 644755 2–24 Standard UL94V -0, .000030 [0. 00076] Gold Plated 641210 32–54 644761 32–54 641207 32–54 Standard UL94V -0, .000015 [0. 00038] Gold Plated 641121 32–54 644768 32–54 644769 32–54 Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. — — — — — — Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-156 Polarized Lock Headers—Straight Material and Finish Housing—UL94V-0 rated, polyester, white Posts—Copper alloy, tin plated .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), mul- tiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 27, 28, and 47. For mating half visuals, use connectors with a locking ramp for polarization/ retention purposes, see pages 29 thru 32, 53 and 55. For por polarizing purposes only use connectors without a locking ramp. See pages 29 thru 32, 49 and 51. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts with pegs would be:: Base number 644615 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-644615-0 All part numbers in bold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644615-2 thru 18 4-644615-8 See page 8 for an explanation of RoHS lead free equivalents. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .210 [5.33] A .125 .125 .425 [3.18] .156 [3.96] .076 [1.93] .045 [1.14] [10.80] .100 [2.54] [3.18] .450 [11.43] .545 [13.84] .073 [1.85] .156 [3.96] .066/.062 [1.68/1.57] Edge of BoardDia. .167 [4.24] .225 [5.72] Min. .078 [1.98] 90° Ref. Typ. Retention Tabs 4 Plc. Post No. 1 Polarized Retention Peg Typ. Peg Hole Polarized Retention Peg PC Board Hole Diameters Square Round Post Post Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Square Posts Round Posts Without Pegs With Pegs Without Pegs With Pegs Standard UL94V -0, T in Plated 644611 32–35 644615 32–48 Standard UL94V -0, .000030 [0. 00076] Gold Plated 644627 32–48 644631 32–35 Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. — — — — — — — — — — — — Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-156 Polarized Lock Headers—Right-Angle Material and Finish Housing—UL94V-0 rated, polyester, white Posts—Copper alloy, tin plated .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), mul- tiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 27, 28, and 47. For mating half visuals, use connectors with a locking ramp for polarization/ retention purposes, see pages 29 thru 32, 53 and 55. For polarizing purposes only use connec- tors without a locking ramp. See pages 29 thru 32, 49 and 51. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with front bend and with pegs would be: Base number 644617 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-644617-0 All part numbers in bold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644617-2 thru 18 4-644617-8 See page 8 for an explanation of RoHS lead free equivalents. Polarized Retention Peg Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .125 [3.18] .156 [3.96] .076 [1.93] Typ. .045 [1.14] .210 [5.33] Typ. Ref. .450 [11.43] .545 [13.84] .156 [3.96] Edge of Board Dia. .239 [6.07] Reg. Hole .066/.062 [1.68/1.57] .078 [1.98] .069/.065 [1.75/1.65] 90 ° Ref. Typ. 4 Plc. Retention Tabs Post No. 1 A .100 [2.54] .425 [10.80] Front Bend Rear Bend .205 [5.21] Typ. .073 .200 [1.85] Typ. .125 [3.18] [5.08] Typ. .125 [3.18] x Typ. Sq. Front Bend Max., when mated with MT A Connector . X = .350 [8.89] Min. when mated with SL-156 Connector . Rear Bend Max., when mate d with MT A Connector . X = .500 [12.7] Min., when mated with SL-156 Connecto r . Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Base Part Numbers Square Posts Front Bend Rear Bend Without Pegs With Pegs Without Pegs Standard UL94V -0, T in Plated 644613 32–48 644617 32–48 Standard UL94V -0, .000030 [0. 00076] Gold Plated 644633 32–48 Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. — — — — — — Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-156 Friction Lock High Temperature Headers—Straight Material and Finish Housing—UL94V-0 rated, nylon, black Posts—Copper alloy, tin plated .000015 [0.00038] gold over nickel Temperature—Maximum Temperature Rating: 280°C Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin-lead on the solder tail. 3. Headers with straight and right-angle square posts are available upon request. Minimums may apply. 4. To determine header overall length (Dim. A), mul- tiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 27, 28, and 47. For mating half visuals, use only connec- tors with a locking ramp for polarization/ retention purposes, see pages 29 thru 32, 53 and 55. For polarizing purposes only use connec- tors without a locking ramp. See pages 29 thru 32, 49 and 51. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with round tin plated posts:: Base number 647648 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-647648-0 All part numbers in bold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647648-2 thru 18 4-647648-2 See page 8 for an explanation of RoHS lead free equivalents. Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Base Part Numbers Round Post Standard UL94V -0, T in Plated 647648 32–42 Standard UL94V -0, .000015 [0. 00038] Gold Plated 647649 32–42 For use with Infrared Reflow Process .650 ± .010 [16.51 ± 0.25] Solder Paste Area .057 ± .003 [1.45 ± 0.08] .545 ± .010 1 ± 25 .125 ± .010 1 ± 25 .700 ± .010 77 ± 25 .076 ± .003 [1.93 ± 0.08] Pretinned Plated Thru Hole Typ. .100 [2.54] Pretinned Land (Both Sides) Typ. .008 [0.20] Min. Thick Solder Paste in Area Shown .120 Typ.[3.05] .156 Typ.[3.96] .070 Typ.[1.78] Position No. 1 .120 Typ.[3.05] Note: Consult Product Drawing for details on placing headers onto PC boards. Ø .045 ± .001 [1.14 ±0.03] 2 Plcs. .210 [5.33] .450 [11.43].125 [3.18] Mating End Solder tail Post No. 1 A Ref. .156 [3.96]Typ. .425 [10.80] .335 [8.51] + .005 – .010 + 115 – 25 .073 Header Part Nos. RoHS Equiv. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details.

MTA, CST-100 II and SL-156 Connectors MTA-156 Shrouded Headers—Straight and Right-Angle Material and Finish Housing—UL94V-0 rated, polyester, black Posts—Copper alloy, tin plated; or .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin-lead on the solder tail. 3. Peg holes are not required in PC boards when headers without pegs are used. 4. One peg only on a 2 position header, other position sizes have two pegs. 5. Right-angle front and rear bend headers with retention pegs can be made available upon request. Minimums may apply. For mateability options, see matrix on pages 27, 28, and 47. For mating half visuals, see pages 29 thru 32. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the head- er. For example, the complete part num- ber for a 10-position header with straight, square posts and with pegs would be: Base number 647127 plus prefix-and-suffix 4- — -0 The correct ordering number is 4-647127-0 No. of Dim. RoHS Pos. A Prefix/Suffix 2 .406 2--2 10.31 3 .562 2--3 14.27 4 .718 2--4 18.24 5 .874 2--5 22.20 6 1.030 2--6 26.16 7 1.186 2--7 30.12 8 1.342 2--8 34.09 9 1.498 2--9 38.05 10 1.654 3--0 42.01 11 1.810 3--1 45.97 12 1.966 3--2 49.94 All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expe- dite your request. Straight Post (.045 [1.14] Square or Round) Right-Angle (.045 [1.14] Square) A .455 [11.56] Polarized Retention Peg .125 [3.18] .045 [1.14] Post No. 1 .156 [3.96] .550 [13.97] .525 [13.34] .300 [7.62] .125 [3.18] .100 [2.54] .167 [4.24] .210 [5.33] .066/062 [1.68/1.58] Dia. .156 [3.96] .078 [1.98] .167 [4.24] .245 [6.22] Edge of Board Min. .066/062 [1.68/1.58] Dia. .156 [3.96] .078 .239 [1.98] [6.07] .350/.700 [8.89/17.78] .069/.065 [1.75/1.65] Edge of Board Dia. Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Straight Post Header Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Right-Angle Header Front Bend Rear Bend Post No. 1[3.96] Typ. .045 [1.14] .525 [13.34] Ref. .300 [7.62] Ref. .455 [11.56] .210 [5.33] .205 [5.21] .125 [3.18] Post No. 1[3.96] Typ. .045 [1.14] .525 [13.34] Ref. .300 [7.62] Ref. .455 [11.56] [5.33] .205 [5.21 ±.002 ± 0.05] .125 [3.18 ± .010 ± 0.25] PC Board Hole Diameters Square Post Round Post Base Part Numbers Straight Square Posts Straight Round Posts Without Pegs With Pegs Without Pegs With Pegs Standard UL94V -0, T in Plated 647123 22–32 647127 22–32 Standard UL94V -0, .000030 [0. 00076] Gold Plated Standard UL94V -0, .000015 [0. 00038] Gold Plated Square Posts Right- Angle Posts, Front Bend Right-Angle Posts, Rear Bend Without Pegs Wit hout Pegs Header RoHS Header RoHS Part Nos. Equiv . Part Nos. Equiv . Standard UL94V -0, T in Plated 647125 22–32 Standard UL94V -0, .000030 [0. 00076] Gold Plated Standard UL94V -0, .000015 [0. 00038] Gold Plated Note: Select load headers (omitted pin headers) are a v ailab le upon request. Please contact product engineer or product manager f or details . Note: Consult Product Dr a wing f or details on placing headers onto PC boards . Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. Header Part Nos. RoHS Equiv. .210 .156 .156 — — — — — — — — — — — — — — — — — —— — — —

MTA, CST-100 II and SL-156 Connectors PRODUCT FACTS

• Rugged wire-to-board interconnection to mate with .045 square or round post headers or staked posts on .156 centers
• Standard Connectors accept wire range of 18–24 AWG [0.9–0.2 mm] and LID Connectors accept wire range of 18–24 AWG [0.9–0.2 mm] and a limited 16 AWG [1.29–1.42 mm] (2550–2800 CMA)
• Two-piece interconnection system (connector/header)
• Housing made of flame retardant nylon
• Available in 1- through 24-position connector configurations
• Connectors are end-to-end stackable
• Wire-to-board system offers polariza- tion with friction lock for positive mating
• Meets the material requirements of Table 23.1 of UL1410 Standard for High-Voltage Television Receivers and Video Productions
• Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476
• Certified by Canadian Standards Association, File No. LR7189 The AMP SL-156 connectors shown on the following pages are designed to mate with .045 [1.14] square or round post headers or staked posts on .156 [3.96] centers. The wire-to-board connector is a two- piece connector system with the wire crimped to the contact, then inserted into the housing. This product mates with the MTA-156 flat, polarized and friction lock header, or staked posts (not MTA-156 shrouded headers). Performance Data* Voltage Rating—250 vac Current Rating—10 amp max. at 250 vac Low-Level Resistance—3.0 mΩ max. initial Dielectric Withstanding Voltage— 2000 vac/1 min. Insulation Resistance—1000 MΩ min. initial Operating Temperature—-55° C to +105° C The Large Insulation Diameter (LID) Contacts and Housings are for use in applications where wire insulation is up to .112 [2.84] in diameter. .156 [3.96] Centerline SL-156 Crimp Contacts and Housings 647230 N Y N Y Y 647227647228647229647260 Y Y N 644769 647262 N Y 647261 Y Y Y Y Y Y 644751 YY NYY YY YYY YY YYY 644752644753644754644755 Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y N Y 644756644757644758644759644760644761644762 Y 641113 647401 Y Y Y Y Y Y Y Y Y Y Y Y Y Y YY Y Y 647400 Y 647402 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 641114641115 N Y N 641118641119641120641121644763644764644765644766644767644768 Headers 640383

647401 YYYNY

647402 YYYNY

Y Y Y 640384640385640387640388640389640445644611644612644613644614644615644616644617 Y Y Y Y Y Y N Y N Y Y Y Y Y Y Y Y Y 644750 Y Y Y Headers 644749 Y 644322 Y Y Y Y Y N 647401 647400 647402 Y Y Y Y Y Y Y Y Y Y Y Y YN Y Y YY Y Y Y Y Y 640250 640251 770849Housings 640250 640251 Standard Standard Standard 770849Housings 640250 640251 770849Housings 641202641203641204641207641208641209641210644627644628644629644630644631644632 Y Y Y Y Y Y Y Y Y N Y N Y Y Y Y Y Y Headers 644633 Y Y Y Y Y YY YY YN Matrix for Tin Plated Part Numbers Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers These matrixes represent only the housing and header combinations. You also need to consider the plating on the contacts and headers. Gold contacts with gold headers and tin contacts with tin headers.

MTA, CST-100 II and SL-156 Connectors SL-156 Crimp Contacts and Keying Plugs Contacts Material and Finish .012 [0.3] bright tin plated brass or phos- phor bronze; .012 [0.3] pre-tin brass; or .012 [0.3] brass or phosphor bronze with .000030 [0.00076] gold over nickel (see chart)

• All tin-plated contacts are post lubricat- ed to resist fretting corrosion
• Maximum insulation diameter is .105 [2.67]
• Wire range is 18-30 AWG [0.9-0.06 mm2] Application Note Part No. 640252 has a higher mating and unmating force than Part No. 350980 and is recommended to be used only in hous- ings with 1 through 12 positions. Part No. 350980 can be used in any size housing but is recommended to be used in housings with 13 through 24 positions. Part No. 770476 is recommended for use in any size housing. Its mating force is similar to Part No. 350980 while unmat- ing force is similar to 640252. For housings, see pages 49 and 50. Keying Plugs Material (RoHS Compliant) UL94V-2 rated, nylon, natural color .115 [2.92] .121/.115 [3.07/2.92] .145/.140 [3.68/3.56] .230 [5.84] .180 [4.57] .131 ± .004 [3.33 ± 0.10] A High Force (6.5 Amp Max. Current Rating) B Low Force (6.5 Amp Max. Current Rating) C Hooded (Dual Wipe) (10 Amp. Max. Current Rating) Wire Size Contact Material and Finish Part Numbers AWG mm2 Strip Loose Piece 24–30 A br ass , pre-tin plated 641550-1 —0.2-0.06 br ass , br ight tin plated 640252-1 640706-1 A br ass , pre-tin plated 640252-2 640706-2 br ass , RoHS Compliant 3-6402 52-1 3-640706-1 br ass , br ight tin plated 350980-1 640707-1 18–24 br ass , pre-tin plated 350980-2 — 0.9-0.2 B br ass , gold plated 350980-3 770258-1 br ass , RoHS Compliant 3-3509 80-1 3-640707-1 phosphor bronze, br ight tin plated 770476-1 770522-1 C phosphor bronze, gold plated 770476-2 770522-2 phosphor bronze, RoHS Compliant 3-770476-1 3-770522-1 .300 [7.62] .225 [5.72] .300 [7.62] Keying Plug Part No. 640254-1 Keying Pin Part No. 640255-1 Application Tooling Extraction T ool Part No. 90471-1 Loose Piece Contacts— PRO-CRIMPER II Hand T ool Part No. 58614-1 (408-4228) [For field ser vice use only] For CER TI-CRIMP hand tool, contact T echnical Support. Strip Contacts — AMP-O-LECTRIC Model “G” T ermination Machine* Applicator 680211-3 (Request Catalog 65828) AMP-O-LECTRIC Model “K” T ermination Machine* Applicator 466468-2 AMP-O-MA TIC Stripper -Crimper Machine* SCA 466947-1 or 567828-1 (with CQM) (Request Catalog 65004) AMPOMA TOR CLS IV+ Lead Making Machine* Applicator 466468-1 (Request Catalog 82659) * Requires applicators. For part numbers, call T echnical Support.

MTA, CST-100 II and SL-156 Connectors SL-156 Housings—Wire-to-Board Housings Material (RoHS Compliant) UL94V-0 rated, nylon, white Notes: 1. Accepts either .045 [1.14] square or round posts. Housings mate with flat and friction lock headers, or staked posts on .156 [3.96] centers. 2. Housings without ramp, with polarizing tab, avail- able upon request. Minimums may apply. 3. Recommend contact: Part No. 640252 for 1 thru 12 positions; Part No. 350980 for 13 thru 24 positions; Part No. 770476 for 1 thru 24 positions. For contacts, see page 48. For mateability options, see matrix on page 47. For mating half visuals, for connectors with locking ramp, see pages 39, 36, 41, 43 and 45, (41 and 44 Front Bend Headers only.) For mating half visuals, for connectors without locking ramp, see pages 35 thru 45. (A) With Locking Ramp/With Polarizing Tabs (B) With Locking Ramp/Without Polarizing Tabs (C) Without Locking Ramp/Without Polarizing Tabs .660 [16.76] .100 [2.54] .019 [0.48] .250 [6.35] 1 2 2 23 4 .156 [3.96] Typ. .076 [1.93] Typ. A .097 [2.46] .037 [0.93] Ref. 1 2 2 23 4 .660 [16.76] .250 [6.35] .100 [2.54] .156 Typ. .076 [1.93] Typ. A .037 [0.93] .097 [2.46] Ref. 1 2 2 23 4 .660 [16.76] .250 [6.35] .156 Typ. .076 [1.93][3.96] A Typ. .060 [1.52] No. of Housing Description Part Numbers*Positions* 2–24 A With Loc king Ramp and P olar izing T abs 770849 1–24 B With Loc king Ramp and without P olar izing T abs 640250 C Without Loc king Ramp or P olar izing T abs 640251 * Base P ar t Number Prefix es and Suffix es indicate n umber of contact positions , e .g. 2 P osition= 0-xxxxxx-2 and 12 P osition=1-xxxxxx-2. Note: Housings not f or use with LID Contacts . Sho wn on page 51. Note: Dim. A = 0.156 (No . of P ositions–1) 0.152 [3.96]

MTA, CST-100 II and SL-156 Connectors SL-156 Housings With Through Board Latch Housings Material (RoHS Compliant) UL94V-0 rated, nylon, white. Mates with .045 square or round staked posts only. For contacts, see page 48. .078 [1.98] .105 [2.67] Posts PC Board .156 [3.96] 1 2 3 4 789 10 1 2 3 4 7 8 9 10 [4.14 .163 .052 ± .002 [1.32 ± .005] +.005 +.013 -.000 -.000 B .105 [2.67] Latch Cutout .015 [0.38] 4 Plc. Max.R. A .078 [1.98] Typ. .156 [3.96] Typ. .063 ± .003 [1.60 ± .008] .063 ± .003 [1.60 ± .008] .050 ± .007 [1.27 ± .018] .075 [1.91] .250 [6.35] .125 [3.18] .660 [16.76] No. of Dimensions Latch Location Part Pos. A B Centered Between Pos. Number 2 .312 1 and 2 1- 770894-27.92 — 3 .468 1 and 2 1- 770894-311.89 — 4 .624 2 and 3 1- 770894-415.85 — 5 .780 2 and 3 1- 770894-519.81 — 6 .936 3 and 4 1- 770894-623.77 — 7 1.092 3 and 4 1- 770894-727.74 — 8 1.248 4 and 5 1- 770894-831.70 — 9 1.404 1.092 1 and 2 & 8 and 9 1- 770894-935.66 27.74 10 1.560 1.248 1 and 2 & 9 and 10 1-770894-039.62 31.70 Note: Not f or use with LID Contacts . Recommended PC Board Cutout for .062 [1.57] Thick PC Board

MTA, CST-100 II and SL-156 Connectors SL-156 Housings and Contacts for Large Insulation Diameter (LID) Wire Housings Material (RoHS Compliant) UL94V-0 rated, nylon, white Notes: 1. Accepts Standard and LID contacts. 2. Larger opening in housings eases contact insertion when using wires that have large insulation diame- 3. Housings are not End-to-End stackable. For mateability options, see matrix on page 47. For mating half visuals, for connectors with locking ramp, see pages 39, 40, 41, 43 and 49, (42 and 44 Front Bend Head- ers only.) For mating half visuals, for connectors without locking ramp, see pages 39 thru 45. Contacts Material and Finish .012 [0.3] bright tin plated phosphor bronze; .012 [0.3] phosphor bronze with .000030 [0.00076] gold over nickel (see chart)

• All tin-plated contacts are post lubri- cated to resist fretting corrosion
• Maximum insulation diameter is .112 [2.85]
• Wire range is 18-24 AWG [0.9-0.2 mm2] and a limited 16 AWG [1.29-1.42 mm2] (2550-2800 CMA) Product Specifications 108-1049-1 and 108-1049-2 Application Specification 114-1021 Application Tooling Extraction Tool Part No. 90471-1 Loose Piece Contacts — PRO-CRIMPER II Hand Tool Part No. 91368-1 [18-24 AWG] Part No. 91369-1 [16 AWG] (For field service use only.) For CERTI-CRIMP hand tool, contact Technical Support. Strip Contacts — AMP-O-LECTRIC Model “G” Termination Machine* Applicator 1385048-3 [18-24 AWG] Applicator 1385219-3 [16 AWG] AMP-O-LECTRIC Model “K” Termination Machine* Applicator 1385048-2 [18-24 AWG] Applicator 1385219-2 [16 AWG] *For additional part numbers and information contact Technical Support. .054 [1.37] .095 [2.41] T yp . .156 [3.96] T yp . .054 [1.37] T yp . .0365 [.927] Ref . .100 [2.54] .250 [6.35] .660 [16.76] A Part Numbers* No. of Description HousingsPosit ions* with Larger Openings for Oversize Wire 1-24 Without Loc king Ramp 647400or P olar izing T abs With Loc king Ramp and 647401 without P olar izing T abs (sho wn abo v e) 2–24 With Loc king Ramp and 647402P olar izing T abs * Base P ar t Number Prefix es and Suffix es indicate n umber of contact positions , e .g. 2 P osition= 0-xxxxxx- 2 and 12 P osition=1-xxxxxx-2. Wir e Part Numbers Size Material Plating For LID* Wire Stri p Loose Piece Phosphor Tin 647406-1 647409-1 18-24 A WG Bronz e Bronz e Gold 647406-2 647409-2 RoHS Compliant

16 A WG Phosphor

(25 50-2 8 0 0 C M A o n l y) Gold 647466-2 647485-2 3-647406-1 3-647409-1 RoHS Compliant 3-647466-1 3-647485-1 *Large Insulation Diameter (.100-.1 12 [2.54-2.84]) Notes: 1. F or inf or mation on application tooling, call T echnical Suppor t. 2. Can not be used with Standard SL-156 Housings , m ust be used with LID Housings only . .160 [4.06] .112 [2.8 4] .108 [2.7 4] .524 [13.30] .143 Hooded (Dual Wipe) (10 Amp Max. Current Rating) Note: Dim. A = 0.156 (No . of P ositions – 1) 0.19

MTA, CST-100 II and SL-156 Connectors MTA Wire Selection Proper wire selection is critical to the success of a wire-to board application. The chart identifies wires that have been evaluated and approved by the product engineering section. If you plan to use a wire not on the approved list, please submit a sample 12” length of wire to TE for evaluation. AWG Metric Equivalents 18 — 0.8–0.9 mm2 20 — 0.5–0.6 mm2 22 — 0.3–0.4 mm2 24 — 0.2 mm2 26 — 0.12–0.15 mm2 28 — 0.08–0.09 mm2 Product Specifications 108-1050 — MTA-100 Connectors 108-1050-1 — MTA-100 Posted Connectors 108-1051 — MTA-156 Connectors 108-1219 — MTA-156 Quad Connector System 108-1065 — MTA-156 Posted Connectors 108-1058 — MTA-156 Card Edge Connectors Application Specifications 114-1019 — MTA-100 Connectors 114-1020 — MTA-156 Connectors 114-1031 — MTA-100 Ribbon Cable Connector Assembly 114-1032 — MTA-156 Ribbon Cable Connector Assembly 114-1048 — MTA-156 Quad Connector MT A Connectors Approved Wire Listing MT A-100 Connectors W all Approved Wire A WG UL 1007 PVC Insulation .015 ʺ [0.381] 22, 24, 26, 28 UL 1061 Semi-Rigid PVC Insulation .009 ʺ [0.229] 22, 24, 26, 28 UL 1095 Semi-Rigid PVC Insulation .012 ʺ [0.305] 24 UL 1371 TEFLON Insulation — TFE .006 ʺ [0.152] 22, 26 UL 2464 PVC .013 ʺ [0.330] 24 MIL-W -16878, T ype B-PVC Insulation .010 ʺ [0.254] 22 MT A-156 Connectors UL 1007 PVC Insulation .015 ʺ [0.381] 18, 20, 22, 24 UL 1061 Semi-Rigid PVC Insulation .009 ʺ [0.229] 18, 20, 22, 24 UL 1213 TEFLON Insulation — T .F .E. 010 ʺ [0.254] 18, 22, 24 UL 1316 PVC/Nylon W all .015 ʺ [0.381] 18, 22 UL 1569 PVC .015 ʺ [0.381] 18 Note: When selecting appro v ed wire styles noted on this list, the MT A Application Specifications guidelines m ust be f ollo w ed. Also , due to wire v ar iations in insulation w all thic kness , hardness and wire str anding w e w ould recommend e v aluating the wire selected bef ore final application appr o v al. TEFLON is a tr ademar k of E.I. DuP ont de Nemours and Compan y . MT A-100 Ribbon Cable Preparation MT A-156 Ribbon Cable Preparation †The dimensions sho wn represent the recommended minim um and maxim um f or notches; the actual dimension will depend on y our applicat ion requirements . Notes: 1. Cab le shall be notched, as indicated in the individual r ib bon cab le connector assemb ly dr a wing, according to the requirements specified in these figures . Conductor shall not be e xposed after notching, nor shall individual wire stands be cut or nic k ed. 2. U .L. Style #2651 r ib bon cab le is appro v ed f or use with MT A- 100 and MT A-156 connectors per Application Specification 114-1031 and 114-1032. Ribbon Cable Cable Edge-to-End Alignm ent (Ends of the cab le shall be prepared as indicated in this figure) .400-.800† [10.16-20.32] Feed-Thru NotchDead-End Notch .036-.046 Standard 26-28 AWG Wire Only) .280-.450† [7.112-11.43] .036-.046 Standard (.046-.052 Allowable for (.046-.052 Allowable for 26-28 AWG Wire Only) .500-1.000† [12.70-25.40] Feed-Thru NotchFlush-Mount Notch .400-.600† [10.16-15.24] .064 [1.63] Typ. (Max.) After Notching .050 [1.27] Dia. (Max.) Typ. (Max.)Dia. (Max.) For Mass Terminating .100 [2.54] (Typ.) Insulation Conductor Web .094 [2.39] After Notching .070 [1.78] For Mass Terminating .156 [3.96] (Typ.) Insulation Conductor Web Ribbon Cable End View – A – .010 A Per Inch of Cable Width Notes: 1. F or MT A Cab le Assemb lies Contact US Engineer ing Cab le Assemb ly Group . 2. F or IDC Cab le , see pages 60 thr u 63.

MTA, CST-100 II and SL-156 Connectors IDC Ribbon Cable .050 [1.27] Centerline, IDC Ribbon Cable PRODUCT FACTS

• Compatible with a variety of Insulation Displacement Connectors
• Available on .025 [0.63], .0394 [1.00], centerline
• Color code edge mark on conductor #1
• Gray flame retardant flexible PVC insulation
• Insulation rated for temperature of -20°C to +105°C
• Recognized under the Component Program of Underwriters Laboratories Inc., File No. E53793 TE has an expanding array of MADISON CABLE planar PVC insulated product de- signed for compatibility with a variety of Insulation Displacement Connectors. AMP IDC terminations offer a quick, reliable, cost-effective cabling system which can be automated. The .100 [2.54] centerline cable is avail- able in 28 to 22 AWG, either as tinned or as overcoated tinned wire, in 2 to 28 conductors. The .156 [3.96] centerline is available in

22 AWG and 18 AWG, either as tinned or

overcoated tinned, in 2 to 24 conductors. IDC Ribbon Cable is produced to tight- er standards than usually required for high yield insulation displacement terminations. The extra precision offers uncomplicated operation in fully auto- matic stripping, notching and termination equipment. Product Specifications Voltage Rating—30 vac Component Recognized by UL to US and Canadian Standards—AWM Style 2651 Sizes

26 AWG, 7/34 Tinned copper, PVC insu-

lation (9–64 conductors), 500 ft. reels (Base AMP Part Number 57034)

28 AWG, 7/36 Tinned copper, PVC insula-

tion (9–64 conductors), 100 ft. reels (Base AMP Part Number 57040) and 500 ft. reels (Base AMP Part Number 971111)

30 AWG, Other conductor counts avail-

able on request. For ordering information, call Toll-Free: 1-877-623-4766 or visit: www.madisoncable.com/fsproducts.htm

MTA, CST-100 II and SL-156 Connectors .100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation Product Specifications Housing — 300 Volts UL Recognized — AWM Style 2651 CSA —Available on request No. of Dimensions Part Conductors A B C Number No. of Dimensions Part Conductors A B C Number

28 AWG 7/32 Tinned Copper

26 AWG 7/34 Tinned Copper

26 AWG 7/34 Overcoated Tinned Copper

Othe r Conductor Counts A v ailab le on Request. Edge Mar k .100 [2.5 4] T yp . Insulation — Gr a y Flame Retard ant Fle xib le PVC .007 [0.17] Minim um Insulation Thic kness T emper atu re Rating — -20°C to +105°C Flammability — UL: VW1 .010 [0.25] B C A Contact MADISON CABLE (1-877-MADISON), a division of TE Connectivity, for engineering questions or for order placement of this cable.

24 AWG 7/32 Overcoated Tinned Copper

22 AWG 7/30 Tinned Copper

MTA, CST-100 II and SL-156 Connectors .156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation Product Specifications Housing — 300 Volts UL Recognized — AWM Style 2651 CSA —Available on request Edge Mar k .156 [3.9 6] T yp . Insulation — Gr a y Flame Retard ant Fle xib le PVC .007 [0.17] Minim um Insulation Thic kness T emper atu re Rating — –20°C to +105°C Flammability — UL: VW1 .010 [0.25] B A C

18 AWG 7/26 Tinned Copper

Othe r Conductor Counts A v ailab le on Request. No. of Dimensions Part Conductors A B C Number Contact MADISON CABLE (1-877-MADISON), a division of TE Connectivity, for engineering questions or for order placement of this cable.

MTA, CST-100 II and SL-156 Connectors Prepared IDC Ribbon Cable In addition to bulk cable, the US Engi- neering Cable Assembly Group offers Prepared Cable for the .100 [2.54] and .156 [3.96] centerline cables. This can be in the form of prenotched cable on reels or cut-to-length cable segments. Prenotched 250 foot reels of cable can be produced with notches at varying in- crements or repeating all along the cable. The maximum width of these cables is 20 conductor for the .100 [2.54] center- line and 13 conductor for the .156 [3.96] centerline. Prepared Cable is also available with a Strip and Retain feature allowing the cable assembly to be soldered directly to the PC Board. This saves space and cost and reduces spare parts inventory. Strip and Retain on both ends is used in family board applications to maintain the electri- cal connection when the PC Board is sep- arated into smaller boards after soldering. Widths are limited to 20 conductors for the .100 [2.54] centerline and 13 conduc- tors for the .156 [3.96] centerline. Howev- er, multiple cables can be placed side-by- side in a single connector. For other styles and configurations contact the product engineer or product manager.

MTA, CST-100 II and SL-156 Connectors MTA Wire Termination Flowchart Insulation Strain Relief Conductor Insulation will be contained within the confines of the insulation strain relief as indicated B Min. A Top of Contact Conductor Bare wires will not be visible beyond back of housing Centerline of Conductor Back of Housing Bare wires will not extend above top of contact Choose the appr opria te MT A Connector fr om the MT A Catalog 82056. Select the pr oper wir e style and A WG for the chosen MT A Connector (Refer to pages 59-63). Choose the MT A T er mina tion T ooling (Refer to pages 55-61). T er minate the Wir e-to-MT A Connector per Applica tion T ooling Instruction Sheet. Inspe ct the MT A Wir e T er mination per Applic ation Specification, especially the wire depth. See illustrations: 114-13072—MTA-50 Connectors, 114-1019—MTA-100 Connectors, 114-102 0 — MT A-156 Connectors, Posted Connector , Car d Edge, 114- 1048 — MT A-156 Quad Connecto rs, 114-10 31—MT A-100 Ribbon Cable Connector Assembly, and 114-1032—MTA-156 Ribbon Cable Connector Assembly. Adjust the T er mination T ooling (if needed) per T ooling Instruction Sheet (r epe at the step above). Connector A B MTA-100 .069–.087 .040 [1.75-2.21] [1.02] MTA-156 .090–.113 .060 [2.29-2.87] [1.52]

MTA, CST-100 II and SL-156 Connectors Manual Arbor Frame (with slide) Part Number 1583518-1* Upper Tooling Part Number 1583514-1* Fixture, Discrete Wire, Closed End Part Number 1583515-1 (28-26 AWG) Part Number 1583515-2 (30-28 AWG) Fixture, Discrete Wire, Feed-Thru Part Number 1583516-1 (28-26 AWG) Part Number 1583516-2 (30-28 AWG) Fixture, Ribbon Cable, Closed End or Feed-Thru Part Number 1583517-1 *Required, plus appropriate Fixture(s). One-At-A-Time Termination Tooling Part Numbers Note: Max. Insulation Outside Diameter Wire: .060 [1.52] f or MT A-100 Connectors /.095 [2.4 1] f or MT A-156 Connectors MTA-100 and MTA-156 Mass Termination Tooling Part Numbers Note: Max. Insulation Outside Diameter Wire: .050 [1.27] f or MT A-100 Connecto rs /.070 [1.78] f or MT A-156 Connectors Harness Board Holding Fixture Interchangeable HeadMTA Connector Interchangeable Head Used With and Tape Feed TrackAssembly Part Number Used With Part Number Applicator Tooling Part Number Used WithAssembly Assembly Closed End —— 58242-1 — 854175-1 & 312522-158242-3 58575-1 854200-1 (Base) Feed Thru 58644-1 (Discrete Wire) † 58074-1 (Man Hd Tl) 58074-1 (Man Hd Tl) 58243-1 — — —MT A-100 58644-2 (Notched Cable) † 58243-3 58575-1Connector Closed End —— 58635-1 58575-1 — —(Posted) Feed Thru —— 58636-1 58575-1 — —(Posted) Closed End —— 58244-1 — 854176-1 & 312522-158244-3 58576-1 854200-1 (Base) Feed Thru 58646-1 (Discr ete Wire) †† 58245-1 — — — MT A-156 58646-2 (Notched Cable) †† 58245-3 58576-1 Connector Car d Edge —— 59848-1 — — —59848-3 58576-1 Closed End —— 58009-1 — — —(Posted) 58009-2 58576-1 Feed Thru —— 58010-2 58576-1 — —(Posted) Manual Bench Closed End —— 58244-1 — T ool 58024-1 — — 58244-3 58576-1 and T oolingMT A-156 Assy 58040-1Quad 58245-1 — 58024-1 and Feed Thru —— T ooling Assy — —58245-3 58576-1 58040-1 †2- thr ough 12-po sitions . ††2- through 8-positions . Manual Bench T ool 58024-1 and T ooling Assembly 58039-1 Manual Bench T ool 58024-1 and T ooling Assembly 58040-1 Interchangeable Head and Interchangeable HeadInterchangeable Head Loose-Piece Feed Track and Tape Feed Track T-HandleMTA Connector Manual Hand Tool 58074-1 Air Bench Mount Air Bench Mount Special Mainte-Assembly Air Hand Tool 58075-1 Tool 58338-1 Tool 58338-1 Applicator nance ToolAir Bench Mount Tool 58338-1 Electric Bench Electric BenchElectric Bench Machine 931800-1 Machine 931800-1 Machine 931800-1 MT A-50 Closed End 1583503-1 ——— —Feed Thru Closed 58246-1 (Standard)* n 853546-1&853542-1 End 58246-2 (Ext W ear)* 933567-1 466728-1 59803-1 MT A-100 58246-3 (Ribbon Cable) (Base) Connector Feed Thru 58442-1 ——— 59803-1 Posted 58638-1 ——— 59803-1(Closed-End) Closed 58247-1 (Standar d)** 853547-1 & 853542-1 End 58247-2 (Ext W ear) 933568-1 466727-1 59804-1 MT A-156 58247-3 (Ribbon Cable) (Base) Connector Feed Thru 58443-1 ——— 59804-1 Posted 58082-1 ——— 59804-1(Closed-End) MT A-156 Closed 58061-1 —— 567020-1 59839-1Card-Edge End MT A-156 Closed 58392-1 ——— 59804-1Quad End *Repai r Kit 856600 -1 **Repair Kit 856600-2 Notes: 1 . A r e p a i r k i t con sist s o f a c a m , a f eed-slide sub-assemb ly andalocating pa wl. Repair kits can be made a v ailab le f or other inter- changeab le heads . Consult T E. 2. Standard modular heads 58246-1 and 58247-1 are recommended f or lo w v olume use . 3. Extended w ear modular heads 58246 - 2 a n d 5824 7-2 are recommended f or high v olume use . 4. T -Handle Maintenance T ools are f or maintenance (field) use only . The y are not rec- ommended f or production. 5. Some Man ual Hand T ool Assemb lies are a v ailab le: a . O r d e r 585 79- 1 , compr i sed of Head 58246-1 with M a n u a l H a n d T o o l 5 807 4 - 1 . b . Ord e r 58580-1, c o m p ri s e d of Head 58247-1 with M a n u a l H and T ool 5 8 074- 1 . c . Ord e r 58639-1 , c omp r ise d of Head 58638-1 with M a n u a l H a n d T o o l 58074 - 1 . MTA-50 Mass Termination Tooling Part Numbers

MTA, CST-100 II and SL-156 Connectors Interchangeabl e Head

• T er m inates one unstripped wir e per cycle
• Aligns and holds the connector in place for each ter mination
• Automatically advances the connector after each ter mination Interchangeable Head and Loose-Piece Feed T rack
• No special setup r equir ed
• Connecto rs ar e easily loaded into feed track
• Connecto rs ar e fed using a simple spring-lo aded pusher Interchangeable Head and T ape Feed T rack
• No special setup r equir ed
• T a p e - mount e d connector s ar e transferr ed fr om pr od- uct r eel to feed track by simp ly pullin g on the fr ee end of the carrier tap e
• Connectors ar e fed using a simple spring- loaded pusher Special Applicator
• Connectors ar e easily hand loaded into feed track
• Automatic ally advances the connec tor after each ter mination
• Cannot be cycled until the connec tor is pr operly positioned Manual Hand T ool with Interchangeable Head Air Bench Mount T ool with Inter changeable Head and Foot Switch Air Hand T ool with Inter changeable Head Electric Bench Machine with Interchangeabl e Head One-At-A-T ime T ermination Tooling ( T ypical T ooling Combinations) Air Bench Mount T ool with Interchangeable Head and Loose-Piece Feed T rack Electric Bench Machine with Inter changeable Head and T ape Feed T rack AMP-O-LECTRIC Bench Machi ne with Special Applicator Powe r Units Manua l Hand T ool — Pisto l Grip Handle Par t No. 58074-1
• Easy to use
• Ratchet contr ol will not r elease the trigger until it is fully bottomed
• Head may be r otated for user convenience Air Hand T ool — Pistol Grip Pneumatic Handle Part No. 58075-1
• Light weight
• Opera tes at air pr essur e between 40 and 70 psi [2.76 and 4.83 bar]
• Head may be r otated for user convenience Air Bench Mount T ool — Bench Mount Power Assembly Part No. 58338-1
• May be moun ted with inter change able head pointed up or down
• Oper ated byafoot switch
• Oper ates at air pr essur e betwe en 40 and 70 psi [2.7 6 and 4.83 bar] Electric Bench Machine — IDC Power Unit Part No. 931800-1
• All electric: 120 V AC,

60 Hz, 2 A

• Comp act, por tab le and quiet
• Oper ated byafoot switch T -Handle Maintenance T ool Interchangeab l e Heads and Applicators (Refer to page 58 for part numbers.)

MTA, CST-100 II and SL-156 Connectors Applicato r and Holding

• Wir es ar e laced into plastic combs for mass ter m ination
• T rims excess wir e for closed-end ter m inations
• Holding fixtur e may be mounted toahar ness boar d App lica tor a n d T ape Feed
• T a p e -mounted c o n nec t ors a r e tra n s ferr e d f r o m p r o d - uct r eel t o fee d trac k b y s i mpl y pul lin g o n t h e f r e e end o f t h e carri e r tap e
• Connectors ar e fed using a simple spring-loade d pusher
• Feed sto p e a s i l y adjusted for dif fer ent connector sizes
• Notch cable with up to 28 conductors for .100 centerline, and 24 conductors for .156 centerline
• Pr essur e plate holds cable in position during notching
• Scra p convenie ntly r emoved thr oug hachute with a blast of air fr om a built-in air valve Mass T ermination T ooling Manual Bench T ool with Applicator and Holding Fixture Manual Bench T ool with Applicator and T ape Feed T rack Air Bench MachineAir Harness T ool with Applicato r Ribbon Cable Notcher Assembly 2700 lb Air Bench Machine with Ribbon Cable Notcher Assembly Powe r Units Manua l Bench T ool — Arbo r Frame Assembly Par t No. 58024-1
• Applicator and holding fixtu r e can be oriented for operator convenience for closed-end or feed-thru ter m inations
• Ram height (inser tion depth) is easily adjusted
• May be bench mounted Air Harness T ools — Hand-Hel d Power Unit with Applicator Part No. 58575-1 (MT A-100) Part No. 58576-1 (MT A-156)
• Applicator can be r otate d 360° for orie ntation with holding fixtu r e
• Inser tion depth is easily adjusted
• Opera tes at air pr essur e between 75 and 95 psi [5.17 and 6.55 bar] Air Bench Machine — Pneumatic Unit Part No. 91112-2
• Oper ated byafoot switch
• Oper ates at air pr essur e betwe en 80 and 90 psi [5.5 2 and 6.21 bar]
• Not r ecommen ded for notching cable with mor e than 14 conductors 2700 lb Air Bench Machine — Part No. 312522-1
• Oper ated byafoot switch
• Capable of exer ting 2,700 lb [12 ,000 N] of for ce at minim um 80 psi [5.5 2 bar] air pr essur e
• May be benc h mounted Applicator s and Notcher Assemblies Ribbon Cable Notcher Assembly Part Number Wire Size Centerl ine Used WithA WG 854449-2 26-28 .100 Manual Bench Tool 2.54 58024-1 854449-4 22-28 .100 Air Bench Machine 2.54 91112-2 2700 lb Bench Machine .156 312522-1 854449-3 18-24 3.96 AMP-O-LECTRIC Bench Machine 1-471273-3 (with Conversion Kit 690675-2) Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb Air Bench Machine. ( T ypical T ooling Combinations) Fixture T r ack

MTA, CST-100 II and SL-156 Connectors Hand Tools, Power Units & Accessories Manual Arbor Frame (MTA-50) 1583518-1 IS408-8812 2700lb Air Bench Machine 312522-1 CM409-5843 Upper Tooling (MTA-50) 1583514-1 IS408-8812 Terminator Assembly, "G" Term 354500-1 CM409-5842 Manual Arbor Frame Assembly 58024-1 IS408-6923 AMP-O-LECTRIC Bench Machine 1-471273-3 CM409-5128 Ribbon Cable Applicator, .100 58039-1 IS408-6685 Conversion Kit 690675-2 IS408-8022 Ribbon Cable Applicator, .156 58040-1 IS408-6701 Base Assembly 853542-1 IS408-9636 Manual Hand Tool 58074-1 IS408-6790 Base 854200-1 IS408-9650 Air Bench Mount Tool 58338-1 IS408-9393 Adapter (AMP-O-LECTRIC) 854468-1 IS408-9687 Air Hand Tool (MTA-100) 58575-1 IS408-4260 Adapter (2700lb Machine) 854468-2 IS408-9687 Air Harness Tool (MTA-156) 58576-1 IS408-4260 Repair Kit 856600-1 IS408-9745 T-Handle Maintenance Tool (MTA-100) 59803-1 IS408-7907 Repair Kit 856600-2 IS408-9745 T-Handle Maintenance Tool (MTA-156) 59804-1 IS408-7907 Electric Bench Mount Tool 931800-1 CM409-5746 Air Arbor Frame Assembly 91112-2 IS408-7763 One-At-A-Time Termination Tooling Interchangeable Heads Interchangeable Head&Loose Piece Feed Track MTA-50 MTA-156 MTA-100 MTA-156 58247-1 IS408-6930 933567-1 IS 408-9435 933568-1 IS 408-9466 MTA-100 58247-2 IS408-9380 Interchangeable Heads&T ape Feed Track 58246-1 IS408-6929 58247-3 IS408-4146 MTA-100 MTA-156 58246-2 IS408-9379 58443-1 IS408-9607 853546-1 IS 408-9636 853547-1 IS 408-9637 58246-3 IS408-4147 58061-1 IS408-6794 Special Applicators 58442-1 IS408-9603 58082-1 IS408-6795 MTA-100 MTA-156 58638-1 IS408-4358 58392-1 IS408-9450 466728-1 AI 408-8054 466727-1 AI 408-8054 567020-1 AI 408-8069 Mass Termination Tooling Die Set Assembly MTA-50 MTA-100 MTA-156 MTA-100 1583515-1 IS408-8812 58242-1 IS408-7994 58009-1 IS408-7995 1583515-2 IS408-8812 58242-3 IS408-7994 58009-2 IS408-7995 1583516-1 IS408-8812 58243-1 IS408-7994 58010-2 IS408-7995 MTA-156 1583516-2 IS408-8812 58635-1 IS408-7994 58244-1 IS408-7995 854175-1 IS408-9667 854176-1 IS408-9650 1583517-1 IS408-8812 58636-1 IS408-7994 58244-3 IS408-7995 58644-1 IS408-4406 58245-1 IS408-7995 58644-2 IS408-4440 58245-3 IS408-7995 59844-1 IS408-7994 58646-1 IS408-4405 59845-1 IS408-7994 58646-2 IS408-4439 59845-3 IS408-7994 59848-1 IS408-7995 59848-3 IS408-7995 Technical Documents Typical Application Rates The following is a list of technical documents covering the installation, operation, adjustment, maintenance and r epair of MT A application tooling. Instruction Sheets (IS) pr ovide instructions for assembling or applying the pr oduct. They are intended for the Manufacturing Assembler or Operator . Customer Manuals (CM) pr ovide complete, detailed instructions on the installation, operation, adjustment, maintenance and repair of complex tools and application machines. Applicator Instructions (AI) ar e similar to instruction sheets (which cover pr oducts and tools), and pr ovide instructions for installation, adjustment and maintenance of applicators used in automatic and semiautomatic machines. Produce 6-in. [15 cm] Long Jumpers, End, Discrete Wire Method Terminations Per Hour Manual Hand T ool 58074- 1 with Interchangeable Head 58246- 1 — Electric Bench Machine 931800-1 with Interchangeable Head 58246- 1 900 Electric Bench Machine 931800-1 with Interchangeable Head and Loose- Piece Feed T rack 933567-1 1,100 Electric Bench Machine 931800-1 with Interchangeable Head and T ape Feed Track 853546-1 and 853542-1 (Base) 1,250 Apply One 4-Position MTA-100 Feed-Thru Connector per Assembly, Discrete Wire Method Terminations Per Hour Manual Bench T ool 58024-1 with Applicator and Holding Fixture 650 For further information about tooling call T echnical Support. Produce 6-in. [15 cm] Long Jumpers, One 4-Position MTA-100 Connector per One 4-Position MTA-100 Connector per End, Ribbon Cable* Method Terminations Per Hour 2700 lb Air Bench Machine 312522-1 with Applicator and T ape Feed T rack 854175-1 and 854200- 1 (Base) 7,500 * Procedure: Mass terminate 12-conductor ribbon cable with three connectors per end. After terminating, separate by tearing the 12-conductor assembly into three 4-conductor assemblies. Cable Notching Method Cable Ends Per Hour 2700 lb Air Bench Machine 312522-1 with Ribbon Cable Notcher Assembly 854449-2 and 854468-2 (Adapter) 1,000 1583503-1 IS408-8801

MTA, CST-100 II and SL-156 Connectors Part Number Index 641187 10 641188 10 641189 10 641190 8 641191 8 641192 8 641193 8 641198 8 641199 8 641200 8 641201 8 641202 39 641203 39 641204 40 641207 42 641208 41 641209 41 641210 42 641211 14 641212 14 641213 16 641214 16 Part No. Page 02WEY00007P 61 02WEY00008P 61 02WFY00006P 61 02WFY00007P 61 02WGY00001P 61 02WGY00008P 62 02WJY000001P 62 05WEY00004P 61 05WEY00007P 61 05WFY00006P 61 05WFY00007P 61 05WGY00006P 61 05WGY00008P 62 05WJY000010P 62 10WEY00007P 61 10WEY00012P 61 10WFY00006P 61 10WFY00007P 61 10WGY00002P 61 10WGY00008P 62 10WJY000010P 62 15WEY00002P 61 15WEY00007P 61 15WFY00006P 61 15WFY00007P 61 15WGY00006P 61 15WGY00008P 62 15WJY000010P 62 20WEY00007P 61 20WEY00008P 61 20WFY00006P 61 20WFY00007P 61 20WGY00006P 61 20WGY00008P 62 20WJY000010P 62 24WGY00008P 62 24WJY000010P 62 25WEY00007P 61 25WEY00008P 61 25WFY00006P 61 25WFY00007P 61 25WGY00006P 61 28WEY00007P 61 28WEY00008P 61 28WFY00006P 61 28WFY00007P 61 28WGY00006P 61 57034 60 57040 60 350980 48, 49 640250 49 640251 49 640252 48, 49 640383 39 640384 39 640385 40 640387 42 640388 41 640389 42 640426 30 640427 30 640428 30 640429 30 640430 30 640431 30 640432 30 640433 30 640434 30 640435 30 640440 8 640441 8 640442 8 640443 8 640445 41 640452 14 640453 14 640454 16 640455 16 640456 17 640457 17 640468 8 640469 8 640470 8 640471 8 640472 30 640473 30 640474 30 640477 30 640480 30 640550 9 640551 33 640556 34 640557 34 640558 34 640559 34 640595 32 640599 32 640600 32 640601 32 640602 32 640604 32 640605 32 640606 32 640607 32 640608 32 640620 8 640621 8 640622 8 640623 8 640629 35 640630 35 640631 34 640632 34 640633 34 640634 34 640635 34 640636 10 640637 10 640638 10 640639 10 640642 9 640643 33 640706 48 640707 48 640708 10 640709 10 641113 39 641119 41 641120 41 641121 42 641122 14 641123 14 641124 16 641125 16 641126 17 641127 17 641143 34 641144 34 641145 34 641146 34 641147 34 641148 30 641149 30 641150 30 641151 30 641152 30 641153 30 641154 30 641155 30 641156 30 641157 30 641168 32 641170 32 641175 32 641186 10 Part No. PageNote: This index lists all cataloged parts by base no. only. Complete part nos. (withprefixes and/or suffixes) are shown on the page(s) indicated. Part No. Page Part No. Page 641215 17 641216 17 641217 31 641218 31 641219 31 641220 31 641221 31 641222 31 641223 31 641224 31 641225 31 641226 31 641231 32 641232 32 641233 32 641234 32 641235 32 641236 32 641237 8 641238 8 641239 8 641240 8 641241 8 641242 8 641243 8 641244 8 641302 32 641311 8 641312 8 641313 8 641314 8 641425 38 641426 38 641427 38 641428 38 641429 38 641435 38 641436 38 641437 38 641438 38 641439 38 641440 38 641522 38 641523 38 641524 38 641525 38 641526 38 641533 35 641534 8 641535 8 641536 8 641537 8 641550 48 641623 35 641643 9 641644 9 641645 9 641646 9 641653 8 641654 8 641655 8 641656 8 641994 10 643067 33 643071 33 643075 9 643077 9

MTA, CST-100 II and SL-156 Connectors Part Number Index (Continued) 643498 8 643813 8 643814 8 643815 8 643816 8 643817 30 643818 30 643819 30 643820 30 643821 30 643828 8 643995 38 644020 8 644038 8 644040 8 644042 8 644043 8 644044 8 644082 30 644083 8 644284 30 644312 8 644313 8 644456 15 644457 15 644460 30 644461 30 644462 30 644463 30 644464 30 644465 32 644466 32 644467 32 644468 32 644617 44 644469 32 644470 32 644471 32 644486 23 644487 23 644488 23 644489 23 644497 8 644501 30 644502 30 644511 8 644512 8 644513 8 644514 8 644540 8 644563 8 644564 8 644565 8 644566 30 644570 30 644574 8 644575 8 644576 8 644577 8 644578 8 644579 8 644611 43 644613 44 644615 43 644631 43 644633 44 644662 30 644663 30 644687 30 644694 15 644695 15 644702 8 644718 32 644720 32 644726 8 644749 39 644750 39 644751 40 644752 41 644753 41 644754 42 644755 42 644756 39 Part No. Page Part No. Page Part No. Page 644893 25 644759 41 644760 41 644761 42 644763 39 644766 41 644767 41 644768 42 644769 42 644783 30 644791 30 644795 8 644803 23 644807 38 644809 38 644812 38 644814 38 644860 30 644861 23 644874 17 644875 17 644876 16 644877 16 644878 30 644884 15 644885 15 644886 15 644887 15 644888 15 644889 15 644890 15 644891 15 644892 25 644894 25 644896 25 644897 25 644898 25 647000 13 647001 13 647002 13 647003 13 647004 13 647005 13 647006 13 647007 13 647008 13 647009 13 647010 13 647011 13 647012 13 647013 13 647014 13 647015 13 647016 13 647017 13 647018 13 647019 13 647020 13 Part No. Page 647021 13 647022 13 647023 13 647030 13 647031 13 647032 13 647033 13 647047 20 647048 20 647050 21 647051 21 647075 20 647076 20 647078 21 647079 21 647106 22 647107 22 647108 22 647109 20 647114 20 647116 21 647117 21 647123 46 647125 46 647127 46 647166 22 647167 22 647168 22 647295 21 647296 21 647297 21 647298 20 647299 20 647300 20 647400 51 647401 51 647402 51 647406 51 647409 51 647466 51 647476 38 647477 8 647478 30 647479 32 647480 8 647481 38 647485 51 647496 32 647497 38 647609 17 647623 17 647624 17 647625 17 647626 17 647627 17 647628 19 647629 19 647630 19 647646 40 647648 45 647649 45 647651 19 647652 19 647653 19 770258 48 770476 48, 51 770522 48 770849 49 770894 50 971111 53 1375819 24 1375820 24 1445336 24 1744017 41 1744020 8

MTA, CST-100 II and SL-156 Connectors Application Tooling Part Number Index 58009 58, 61 58010 58, 61 58024 58, 60, 61 58039 58, 61 58040 58, 61 58061 58, 61 58074 58, 60, 61 58075 58, 59 58082 58, 61 58242 58, 61 58243 58, 61 58244 58, 61 58245 58, 61 58246 58, 61 58247 58, 61 58338 58, 60, 61 58392 58, 61 58442 58, 61 58443 58, 61 Part No. Page 58517 24 58575 58, 60, 61 58576 58, 60, 61 58579 58 58614 48 58635 58, 61 58636 58, 61 58638 58, 61 58639 58 58644 58, 61 58646 58, 61 59803 58, 61 59804 58, 61 59836 10 59837 34 59839 58 59845 61 59848 47, 50 90471 48 Part No. Page 91112 60, 61 Part No. Page 312522 58, 60, 61 354500 61 466468 48 466727 58, 61 466728 58, 61 466747 10 466947 48 471273 60, 61 567020 58, 61 567373 24 567827 24 567828 48 567910 24 680211 48 690675 60, 61 853542 58, 61 853546 58, 61 853547 58, 61 854175 58, 61 854176 58, 61 854200 58, 61 854449 60 854468 60, 61 856600 58, 61 931800 58, 60, 61 933567 58, 61 933568 58, 61 1583503 58, 61 1583514 58, 61 1583515 58, 61 1583516 58, 61 1583517 58, 61 1583518 58, 61 Part No. Page

MTA, CST-100 II and SL-156 Connectors Global Contacts Americas Asia /P acific Ar gentina – Buenos Air es Phone: +54- 11-4 7 33-2200 F ax: +54- 11-4 7 33-2211 Br asil – São P aulo Phone: +55- 11-210 3-6000 F ax: +55- 11-210 3-60 30 Chile – Santiago Phone: +56-2- 345-0 36 1 F ax: +56-2-2 23- 14 77 Canada – T or ont o Phone: +905-4 7 5-6222 F ax: +905-4 7 4-55 20 Product Information Center: Phone: +905-4 7 0-4425 F ax: +905-4 7 4-55 25 C olombia – Bogota Phone: +57-1- 319-8959 F ax: +57-1- 319-8 960 Me xic o – Me xic o City Phone: +5 2-55- 1106-0800 +0 1-800- 7 33-8 9 26 F ax: +5 2-55- 1106-090 1 F or La ti n / South American C ountries not sho wn Phone: +54- 11-4 7 33-20 15 F ax: +54- 11-4 7 33-2083 A us tr alia – S y dne y Phone: +6 1-2-9 554-2600 F ax: +6 1-2-9 50 2-2556 Product Information Center: Phone: +6 1-2-9840-82 00 F ax: +6 1-2-9 6 34-6 188 India – Bangalor e Phone: +91-80-285-40800 F ax: +91-80-285-40820 Indonesia – Jak arta Phone: +65-6482-0 311 F ax: +65-6482- 10 12 Japan – K a w asaki, K anagawa Phone: +81-44-844-8111 F ax: +81-44-812- 320 7 Product Information Center: Phone: +81-44-844-80 13 F ax: +81-44-812- 3200 K or ea – Seoul Phone: +82-2 - 34 15-4500 F ax: +82-2 - 3486- 3810 Mala y sia – Selangor Phone: +60- 3- 7 805- 3055 F ax: +60- 3- 7 805- 3066 Ne w Z ealand – A uckland Phone: +64-9-6 34-4580 F ax: +64-9-6 34-4586 Philippines – Mak a ti City Phone: +6 32-848-0 17 1 F ax: +6 32-86 7 -866 1 P eople’ s R epublic of China Hong K ong Phone: +85 2-2 7 3 5- 1628 F ax: +85 2-2 7 3 5-0 2 43 Shanghai Phone: +86-21-2 407-1588 F ax: +86-21-2 407-15 99 Singapor e – Singapor e Phone: +65-6482-0 311 F ax: +65-6 482- 10 12 T aiw an – T aipei Phone: +886-2-8 7 68-2 7 88 F ax: +886-2-8 7 68-2268 Thailand – Bangk ok Phone: +66-2-9 55-0500 F ax: +66-2-9 55-0505 V ietnam – Ho Chi Minh Cit y Phone: +84-8-9 30-5546 F ax: +84-8-9 30- 3443 Unit ed S ta t es Harrisbur g, P A Phone: +1- 7 17 -564-0 100 F ax: +1- 7 17 -986- 7 5 7 5 Product Information Center: Phone: +1-800-5 22-675 2 F ax: +1- 7 17 -986- 7 5 7 5 T r o y , MI Phone: +1-2 48-2 7 3- 3359 F ax: +1-2 48-2 7 3- 3322 Eur ope /Middle Eas t / A frica A us tria – V ienna F ax: +43- 1-905-60- 1333 Product Information Center: Phone: +43- 1-905-60- 12 4 9 F ax: +43- 1-905-60- 1251 Belarus – Minsk Phone: +375 17 23 7 4 7 94 F ax: +375 17 23 7 4 7 94 Belgium – K es sel-L o Phone: +32- 16- 3 5 2- 300 F ax: +32- 16- 3 5 2- 3 55 Bulgaria – Sofia Phone: +359-2-9 7 1-215 2 F ax: +359-2-9 7 1-215 3 Cz ech R epublic and Slo v akia Cz ech R epublic – K urim Phone: +420-54 1- 162- 111 F ax: +420-54 1- 162-223 Product Information Center: Phone: +420-54 1- 162- 113 F ax: +420-54 1- 162- 132 Denmark – Glos trup Egypt – Cair o Phone: +20 2-4 19-2334 F ax: +20 2-4 17 - 7 64 7 Es t onia – T artu Phone: +3 7 2-5138-2 7 4 F ax: +3 7 2- 7 400- 77 9 Finland – Helsinki Phone: +3 58-9 5- 12- 34-2 0 F ax: +3 58-9 5- 12- 34-2 50 Fr anc e – C er gy -P ont oise C ede x Phone: +33- 1- 3420-8888 F ax: +33- 1- 3420-8600 Product Information Center: Phone: +33- 1- 3420-8686 F ax: +33- 1- 3420-8623 Fr anc e Export Divisions – C e r gy -P ont oise C ede x Phone: +33- 1- 3420-8804 F ax: +33- 1- 3420-86 99 German y – Bensheim Phone: +4 9-6251- 133-0 F ax: +4 9-6251- 133- 1600 Product Information Center: Phone: +4 9-6251- 133- 1999 F ax: +4 9-6251- 133- 1988 Gr eec e – A thens Phone: +30-2 10-9 3 7 0- 3 96 / 3 9 7 F ax: +30-210-9 3 7 0-655 Hungary – Budapes t Phone: +36- 1-28 9- 1000 F ax: +36- 1-28 9- 10 10 Product Information Center: Phone: +36- 1-28 9- 10 16 F ax: +36- 1-28 9- 10 17 Ir eland – Dublin Phone: +353- 1-866-56 12 F ax: +353- 1-866-5 7 14 Isr ael – P etach- T ik v a Phone: +9 7 2- 3-9 29-0999 F ax: +9 7 2- 3-919- 1088 Italy – C oll egno (T orino ) Phone: +3 9-0 11-40 12- 111 F ax: +3 9-0 11-40 31- 116 Product Information Center: Phone: +3 9-0 11-40 12-428 F ax: +3 9-0 11-40-28 7 -428 Lithua nia and La tvia Lithua nia – V ilnius Phone: +3 7 0-5-213- 140 2 F ax: +3 7 0-5-213- 140 3 Product Information Center: Phone: +3 7 0-5-211- 30 16 F ax: +3 7 0-5-213- 140 3 Netherla nds – ’s-H ert ogenbosch Phone: +31- 7 3-62 46-2 46 F ax: +31- 7 3-6212- 365 Product Information Center: Phone: +31- 7 3-62 46-999 F ax: +31- 7 3-62 46-998 Norw a y – Nesbru Phone: +4 7 -66- 77 -88-50 F ax: +4 7 -66- 77 -88-55 P oland – W arsa w Phone: +48-22-45 7 6- 7 00 F ax: +48-22-45 7 6- 7 20 Product Information Center: Phone: +48-22-45 7 6- 7 04 F ax: +48-22-45 7 6- 7 20 R omania – Buchar es t Phone: +40-21- 311- 34 7 9 / 3596 F ax: +40-21- 312-05 7 4 Rus sia – Mosc o w Phone: +7 -4 9 5- 7 90- 7 90 2 F ax: +7 -4 9 5- 7 21- 18 9 3 Product Information Center: Phone: +7 -4 9 5- 7 90- 7 90 2-404 F ax: +7 -4 9 5- 7 90- 7 90 2-40 1 Rus sia – S t. P et ersbur g Phone: +7 -812- 7 18-819 2 F ax: +7 -812- 7 18-819 3 Slovenia – Ljubljana Phone: +386- 156 1- 32 7 0 F ax: +386- 156 1- 32 40 South A frica – P ort Elizabeth Phone: +2 7 -4 1-50 3-4500 F ax: +2 7 -4 1-581-0440 Spain – Bar c elona Phone: +34-9 3-291-0 330 F ax: +34-9 3-20 1- 787 9 S w eden – Upplands Väsb y S witz erland – S t einach Phone: +4 1- 7 1-44 7 -044 7 F ax: +4 1- 7 1-44 7 -0444 T urk e y – Is tanbul Phone: +90-212-281-8181/ 2/ 3 +90-212-282-513 0 / 543 0 F ax: +90-212-281-8184 Ukr aine – Kie v Phone: +380-44-206-2265 F ax: +380-44-206-2264 Product Information Center: Phone: +380-44-206-2265 F ax: +380-44-206-2264 Unit ed Kingdom – S tanmor e , Middlese x Phone: +44-8 7 06-080 208 F ax: +44-208-9 54-6234 Product Information Center: Fr eephone ( UK only ): +0800-26 7 -666 Phone: +44-8 7 06-080 208 F ax: +44-208-420-809 5

TE TECHNICAL SUPPORT CENTER USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 APPLIANCES / / / MTA, CST-100 II AND SL-156 CONNECTORS te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2017 TE Connectivity Ltd. family of companies All Rights Reserved. 82056 06/17 Revised