63D-12-1AE OENINDIA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

  • Upto 30 A Switching
  • High Performance
  • Spade Terminals for Power Output
  • High Reliability
  • AC & DC Versions
  • Sealed
  • UL Approved HEAVY DUTY POWER RELAY SPECIFICATIONS HOW TO ORDER Contact Arrangement : 1 Form A/1 Form C Contact Material : Silver Alloy Contact Rating Rated Voltage : 230 VAC/24 VDC Maximum Voltage : 250 VAC Maximum Continuous Current @ 230 VAC/24VDC

1 Form A : 30A

Motor Load : 2HP/230VAC

1 Form C : 30 / 20 A

Maximum Power Rating : 7500VA (SPST) Nominal Coil Power DC : 0.93W (approx) AC : 2VA Operating Power DC : 0.5W (approx) Life Expectancy Mechanical : 10 operations Electrical : 10 operations Contact Resistance : 50 milli Ohms (Initial) Dielectric Strength Between Contacts & Coil : 2500 VRMS Between Contacts : 1500 VAC Insulation Resistance : 1000 Meg.Ohms at 500VDC,

25 C,RH50

at Nominal Voltage : 10 milli sec.(Typ) Release time at Nominal Voltage : 8 milli sec.(Typ) 0 0 Ambient Temperature : –55 C to +100 C Weight : 35gms (approx) * The tab on the cover should be removed after PCB cleaning. Typical applications Air Conditioning Systems, Ventilation, Heater, Domestic Appliances, Automotive. Product Series Coil Voltage (Refer coil data) Contact arrangement 1A - Form A 1C -1 Form C Sealed Specialities if any 5 3.75 0.6 27 6 4.50 0.9 40 12 9.00 1.2 160 18 13.50 1.8 380 24 18.00 2.4 660 VAC VAC VAC Ohms 230 190 23 13,490 Nominal Voltage VDC Coil Resistance Ohms ± 10% Pick-up Voltage VDC (Max) Drop-out Voltage VDC (Min) AC Coil Data COIL DATA D : DC Coil A : AC Coil

63 D - 12 - 1A E XXX

All dimensions are in mm. Specifications subject to change without notice. Tolerance unless otherwise specified is ± 10% DRILLING PATTERN 2 x Ø1.2±0.1 14.003.80 CIRCUIT DIAGRAMS Limiting Curve for Power Load Contact Voltage(V) Contact Current (A) 100 1 100 200 1000 ACResistive DC Resistive View : Terminal Side DIMENSIONS * Vent hole to be opened after PCB Soldering & Cleaning 32.4 27.5 0.86.4 28.0 0.5 3.3±0.05 NO NC