DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Dimensions: [mm] Pl L 1,27 0,90 ±0.10 Properties Value Unit Tol. Pins 4 Pin to Pin (Middle) Pl 3.81 mm ±0.15mm Length L 4.81 mm ±0.15mm Article Properties: Note: Because of manufacturing matters, our Ribbon flat cable reels might be cut into two pieces. Please note that Würth Elektronik won’t accept any complaint or replacement about that. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

74638 Waldenburg

Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE PROJECTION METHOD DaSc GM DIN ISO 2768-1m

DESCRIPTION

1.27mm Ribbon Flat Cable 1m WR-CAB ORDER CODE 63910415521CAB REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE

001.001 Valid 2017-09-08 eiCan 1/5

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

4 3.81 mm 4.81 mm 63910415521CAB 6 6.35 mm 7.35 mm 63910615521CAB 8 8.89 mm 9.89 mm 63910815521CAB 9 10.16 mm 11.16 mm 63910915521CAB 10 11.43 mm 12.43 mm 63911015521CAB 12 13.97 mm 14.97 mm 63911215521CAB 14 16.51 mm 17.51 mm 63911415521CAB 15 17.78 mm 18.78 mm 63911515521CAB 16 19.05 mm 20.05 mm 63911615521CAB 18 21.59 mm 22.59 mm 63911815521CAB 20 24.13 mm 25.13 mm 63912015521CAB 22 26.67 mm 27.67 mm 63912215521CAB 24 29.21 mm 30.21 mm 63912415521CAB 25 30.48 mm 31.48 mm 63912515521CAB 26 31.75 mm 32.75 mm 63912615521CAB 34 41.91 mm 42.91 mm 63913415521CAB 40 49.53 mm 50.53 mm 63914015521CAB 50 62.23 mm 63.23 mm 63915015521CAB 60 74.93 mm 75.93 mm 63916015521CAB 64 80.01 mm 81.01 mm 63916415521CAB Article Properties: Properties Value Unit Standard Polarities 06;08;09;10;12;14;16;20,24,26;34;40;50;60;64 Pitch P 1.27 mm Kind Properties: Insulator Material PVC Insulator Color Grey with Red Marking on 1st Conductor Conductor Material Copper Conductor Plating Tin Material Properties: Operating Temperature -25 °C up to +105 °C Flame Test VW-1 IEC 332-1 Style UL 2651 General Information: Properties Test conditions Value Unit Tol. Rated Current IR 1 A max. Rated Voltage UR 300 V (RMS) Withstanding Voltage 1 min 2000 V (AC) min. Insulation Resistance 1 Kilometer RISO 100 MΩ min. Signal Delay 1 Meter 4.65 ns Conductor Resistance 1 Kilometer R 237 Ω max. Unbalanded Capacity 1 Meter 56 pF Unbalanced Impedance 90 Ω Unbalanced Inductance 1 Meter 1.45 µH Electrical Properties: Properties Value Unit Stranded Wire Section (Imperial) 28 (AWG) Stranded Wire Section (Metric) 0.089 (mm²) Number on Strand 7 Number on Conductor 0.013 mm Wire Properties: Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE PROJECTION METHOD DaSc GM DIN ISO 2768-1m 1.27mm Ribbon Flat Cable 1m WR-CAB ORDER CODE 63910415521CAB REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE

001.001 Valid 2017-09-08 eiCan 2/5

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

UR AWM 2651 VW-1 105°C 300V 28 AWG WUERTH ELEKTONIK 298 cUR AWM I A/B 105°C 300V FT1 FT2 Standard: Packaging Bag Packaging Unit (Qty.) 1 Packaging Properties: 1 piece = 1 Meter of cable Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE PROJECTION METHOD DaSc GM DIN ISO 2768-1m 1.27mm Ribbon Flat Cable 1m WR-CAB ORDER CODE 63910415521CAB REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE

001.001 Valid 2017-09-08 eiCan 3/5

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Cautions and Warnings: The following conditions apply to all goods within the product services of the Connectors of Würth Elektronik eiSos GmbH & Co. KG: General:

  • This electronic component is designed and developed with the intention for use in general electronics equipment.
  • Before incorporating the components into any equipment in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval.
  • In addition, even electronic component in general electronic equipment, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed by the user before usage.
  • The connector is designed and manufactured to be used within the datasheet specified values.
  • Do not use the connector outside the datasheet specifications.
  • Prevent any damage or scratches on the connector, especially on the actuator.
  • Direct mechanical impact to the product shall be prevented (e.g overlapping of the PCB´s).
  • The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specification for standard products do also apply to customer specific products.
  • The Connectors are designed to be used along with Würth Elektronik counterparts and tools. Würth Elektronik cannot insure the reliability of these components while being used with other products. Product Specific: Soldering:
  • The solder profile must comply with the WE technical soldering specification, otherwise this will void the warranty.
  • Other soldering methods are not verified and have to be validated by the customer at his own risk. Cleaning and Washing:
  • Parts are not constructed for washing, so washing can cause malfunction afterwards.
  • Cleaning agent that are used to clean the customer applications might damage or change the characteristics of the component, body, pins and termination.
  • Please do not submerse our washable products into water or cleaning agents or put them in locations exposed to water completely.
  • When cleaning by hand (brushing), please do not use excessive force on our connectors to avoid malfunction afterwards, because customer could deform function relevant areas.
  • We recommended a solution without organic acid (preserve the plating against corrosion) volatile, without residues and compatible with the plastic.
  • We recommend to perform tests and to let a part in immersion in the solution 8 to 12 hours and see if there is a degradation. Storage Conditions:
  • The Connectors are considered MSL1 into closed original packaging and are not subject to storage time limits regarding the moisture sensivity but all products shall be used before the end of the period of 12 months based on the products date code, if not 100% solderability can’t be warranted. Handling:
  • Do not repeatedly operate the connector with excessive force. It may damage or deforms the contact dome which results in malfunction.
  • In the case a product requires particular handling precautions, in addition to the general recommendations mentioned here before, these will appear on the product datasheet. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE PROJECTION METHOD DaSc GM DIN ISO 2768-1m 1.27mm Ribbon Flat Cable 1m WR-CAB ORDER CODE 63910415521CAB REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE

001.001 Valid 2017-09-08 eiCan 4/5

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: 1. General Customer Responsibility Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not. 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 3. Best Care and Attention Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. 6. Product Life Cycle Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 7. Property Rights All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 8. General Terms and Conditions Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE PROJECTION METHOD DaSc GM DIN ISO 2768-1m 1.27mm Ribbon Flat Cable 1m WR-CAB ORDER CODE 63910415521CAB REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE

001.001 Valid 2017-09-08 eiCan 5/5

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.