6361139-1

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 320

Technical content

Tyco Electronics Corporation Harrisburg, PA tycoelectronics.com 1307191–3M–LUG–FP–3-07 RF Coax Products RF Coax Products Catalog Catalog 1307191 Revised 3-07 Cat1307191_Cover+Spine_v7.qxd 2/21/07 2:46 PM Page 1

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Introduction RF Coax Connectors The Tyco Electronics RF Coaxial catalog combines the best products from industry leading brand names like M/A-COM and AMP. We have integrated these into one cohesive set of RF products focused specifically on wireless, wireline carrier, and enter- prise networking sectors of the world telecom equip- ment market. Tyco Electronic’s broadest selection of RF connectors and coaxial cable assem- blies provides you with a solution for every intercon- nection requirement. Type N and 7/16 connec- tors are used where high power and rugged reliability are required, typically as antenna feeds, filter/ combiner I/O’s, and power amplifier outputs. SMA, SMB, and TNC connectors are the primary cable inter- face for inner cabinet rout- ing and are available in panel mount, board mount, and cable terminations. Subminiature connectors such as MCX, SMP, DIN, and BlindMate provide panel to board and back- plane connections. Finally, our micro miniature SSMT, and MMCX series provide excellent board to board and card edge to board solutions. All of these interfaces are supported with cable termi- nating tools and between series adapters to meet all your requirements for trou- ble free terminations at the lowest applied cost. The appendices hold a wealth of information including a Theory and Application tutorial, RG/U cable specifi- cation tables, Application notes on White Bronze plat- ing and intermodulation distortion. Whether you need rugged external RF power cables, panel mount, board to board, blindmate, or DIN, Tyco Electronics has the connection. How to Use This Catalog Based on the communica- tions gear that you are designing: ■ Wireless Basestations ■ Carrier Rack Equipment ■ Chassis Set Top Box ■ NIC Card Typical equipment drawings on pages 306-309 guide you to the interconnect section(s) in this catalog. Selection guides will direct you to products based on performance and mechanical requirements such as impedance, VSWR, max. frequency, power handling, etc. There are other guides to help you find the right connection: A table of contents listed by interface type, a complete connector type selector describes each interface with typical applications, and a mini- selection guide shows key parameters to quickly pinpoint the right connector type. Product Facts ■ Listed under the Component Program of Underwriters Laboratories Inc., File No. E-81956 as indicated by Product Family ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E-81956 as indicated by Product Family ■ Certified by Canadian Standards Association File No. LR 7189 as indicated by Product Family ■ Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request ISO Certified 9001 R R R Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in all Tyco Electronics products. They can provide you with: ■ Technical Support ■ Catalogs ■ Technical Documents ■ Product Samples ■ Tyco Electronics Authorized Distributor Locations Restriction on the use of Hazardous Substances (RoHS) At Tyco Electronics, we’re ready to support your RoHS require- ments. We’ve assessed more than 1.5 million end items/com- ponents for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as: RoHS Compliant — Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. NOTE: For purposes of this Catalog, included within the defini- tion of RoHS Compliant are products that are clearly “Out of Scope” of the RoHS Directive such as hand tools and other non-electrical accessories. Non-RoHS Compliant — These part numbers are identified with a “/H12135” symbol. These products do not comply with the material restrictions of the European Union Directive 2002/95/EC. NOTE: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For lat- est compliance status, refer to our website referenced at right. Getting the Information You Need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: ■ Cross-Reference from Non-compliant to Compliant Products ■ Ability to browse RoHS Compliant Products in our on-line catalog ■ Downloadable Technical Data Customer Information Presentation ■ More detailed information regarding the definitions used above ■ So whatever your questions when it comes to RoHS, we’ve got the answers at www.tycoelectronics.com/leadfree RoHS Customer Suppor t Center

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Catalog Table of Contents RF Coax Connectors Disclaimer While Tyco Electronics Corporation and its affiliates referenced herein (“Tyco Electronics”) have made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly dis- claims all implied warranties regarding the information contained herein, includ- ing, but not limited to, any implied war- ranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Users should independently evaluate the suit- ability of, and test each product for, their application. The dimensions, specifications, designs, construction, materials and processes in this catalog are for reference purposes only and are subject to change without notice. Please consult Tyco Electronics for the most current product information. The export of certain Tyco Electronics products is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401 et seq.). Orders may be subject to export approval by the U.S. Government. Buyer must comply with all applicable export laws of all applicable jurisdictions. © Copyright 2007, 2000, 1998, 1994, 1992, 1990, and 1982 by Tyco Electronics Corporation. All International Rights Reserved. ACTION PIN, AMP , AMP-HDI, AMPLIMITE, AMP-O-LECTRIC, CERTI-CRIMP , COAXICON, M/A-COM, OSP , OSSP , PIDG, PRO-CRIMPER, RAYCHEM, SIEMAX, SMT/QuickGrip, SOLISTRAND, STAX, TE LOGO, TYCO ELECTRONICS and Z-PACK are trademarks. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. DANIELS is a trademark of Daniels Manufacturing Corporation. GPO is a trademark of Corning Gilbert, Inc. HIROSE is a trademark of Hirose Electric. MURATA is a trademark of Murata Electronics, Inc. ROLM is a trademark of the Rolm Corp. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc. TROMPETER is a trademark of Trompeter Electronics, Inc. VALOX is a trademark of General Electric Company. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. See inside back cover for Global Contacts and phone numbers. Miniature Connectors Subminiature Connectors Micro Miniature RF Coax Connectors Multi Position Connectors Appendix

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Connector Selection RF Coax Connectors Connector Types 7-16 Series connectors are designed for medium to high power applications such as cellular base stations, control components, antenna and broadcast. The 7-16 Series minimizes intermodulation distortion by white bronze or silver plating the electrical path. Combined hex/knurl coupling nuts allow for manual or torque tightening, further reducing distortion by providing a strong butt joint. Lightning Protectiondevices have an integral surge arrestor capsule which is designed to protect equipment from high current pulses. It is effective against very fast rise times as induced by electromag- netic pulses from nuclear explosions (NEMP) and the slower pulses arising from lightning strikes (LEMP). N Series threaded connectors have an air dielectric interface and are low cost. These connectors operate to 11 GHz and are commonly used in cable-based local-area networks (LAN’s) medium power transmitters, and base station antenna applications. TNC connectors have an interface similar to BNC except for a threaded coupling nut. The tighter fit provided by this screw-on connection improves interface control allowing connectors to operate up to 11 GHz. TNC connectors are excellent for mobile units where top-notch performance is required under vibration. BNC connectors offer easy engagement and disengagement using bayonet couplings and overlap- ping dielectrics. They are most useful for frequently coupled and uncoupled RF connections with fre- quencies below 4 GHz. BNC connectors find applications in flexible networks, instrumentation, and computer peripheral interconnections. F & G Series connectors offer enhanced performance beyond 1 GHz. Designed to meet the rigor- ous requirements of Bellcore TA-NWT-001503 and SCTE specifications, the F & G series provides high current carrying capabilities in both sealed and un-sealed configurations. Plugs, jacks and adapters are available in threaded and push-on versions. These connectors meet the evolving needs of the communications industry for increased reliability and performance. SMA threaded connectors are widely used in microwave communications. Connectors operate to at least 12.4 GHz on flexible coax cables, and up to 26.5 GHz on semi-rigid coax cables. Crimp-on SMA connectors that operate to 26.5 GHz are available. Blind Mate connectors operate to 22 GHz for OSP connectors, 28 GHz for OSSP connectors, and 40 GHz for SMP style connectors. These connectors offer easy slide-on connection and require less alignment between the cable and the equipment than other connectors with comparable band width. Blind Mate connectors are widely used as coaxial interconnects between plug-in modules and moth- erboards when axial and radial misalignments are necessary. SMB connectors feature a snap coupling for fast connection. A self centering outer spring and over- lapping dielectric allows easy snap-on and excellent performance even in moderate vibration. The SMB is smaller in size than the SMA and excellent where engineers are concerned about circuit miniaturization. Typical application is inter- or intra-board connection of RF or digital signals. Commercial 50 ohm versions operate to 4 GHz, and 75 ohm versions reach 2 GHz. MCX connectors offer a high reliability, space saving sub-miniature coaxial cable to cable and cable to board interconnection system. The MCX connectors impedance types are applicable up to 6 GHz. Surface Mount (SMT) connectors. The RF solution to the communication and information age. Tyco Electronics’ SSMT and SMT Quick Grip connectors are designed to meet the growing demand for surface mount RF connector technology. These connectors operate up to 6 GHz utilizing cable assembly design to terminate to SMT connectors. Surface mount connectors contribute to high density packaging and high volume manufacturing requirements. (CECC 22240), Subminiature D (DIN 41652 and CECC 75 301-082), and Tyco Electronics’ own SIEMAX multi coax connector series offer the customer a broad choice of options where density and performance are a major concern. The 1.0/2.3 series contacts are available in both 50 and 75 Ohm versions and are designed for use to 10 GHz. The different types of coupling mechanisms, such as screw on, slide-in and latching coupling provide for a variety of space-saving installations. The con- nector series 1.6/5.6 has been modified to incorporate improved technical advantages. A 75 Ohm design for use up to 8 GHz, it offers excellent screening effectiveness and is a most suitable compo- nent for those applications where the transmission of high bit rates is required. In Subminiature D type connectors these interfaces provide good electrical grounding and electromagnetic shielding in a small package size. These plug connectors address the increasing demands related to EMC (electromagnetic compatibility) and RFI (immunity to radiated noise), and are widely used as inter- face connectors in office and data systems, telecommunications equipment, and in measurement and control systems. Tyco Electronics’ SIEMAX connectors combine the benefits of surface mount technology and modular design. This 75 Ohm connector series operates up to 2 GHz and offers a compact grid pitch of 10mm. Its uses include multiplex and high-density systems, and Base Station applications. Miscellaneous connector types include multiple-circuit connectors that use coaxial contacts in a pin-and-socket configuration, crimp-on ferrules that offer fast, reliable connections for attaching one or more ground taps to shielded wire and braided shield terminations for connecting cable shields to pc boards. Also available are network/premises interconnect products for Ethernet/IEEE 802.3 systems and coaxial taps for simple, dependable connections from transceiver to LAN without cutting the cable.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Connector Selection Guide Nominal Maximum Temperature Cable Retention Coupling Maximum Durability Connector PageProduct Impedance Frequency Rating Mechanism Peak Cycles Body No.Ohms GHz C lb [N] Voltage Finish 7-16 Series 50 7 -55° to +155° RG8A/U — Threaded 4000 500 White Bronze 7 Lightning Protection 50 2.5 -45° to +85° Adapter — Threaded 650 500 White Bronze 12 N Series 50 11 -65° to +85° 90 400.3 Threaded 1000 500 Nickel 20Commercial (RG-214/U) TNC 50 7 -65° to +165° 60 266.9 Threaded 500 500 Silver 29Single Crimp (RG-58C/U) TNC 50 11 -65° to +165° 60 266.9 Threaded 500 500 Silver or Nickel 29Dual Crimp (RG-58C/U) TNC 50 7 -55° to +85° 60 266.9 Threaded 500 500 Nickel 29Commercial (RG-58C/U) TNC 75 2 -55° to +85° 60 266.9 Threaded 500 500 Nickel 2975 Ohm (RG-59B/U) BNC 50 2.5 -65° to +165° 60 266.9 Bayonet 500 500 Silver or Nickel 44Single Crimp (RG-58C/U) BNC 50 4 -65° to +165° 60 266.9 Bayonet 500 500 Silver or Nickel 44Dual Crimp (RG-58C/U) BNC 50 4 -55° to +85° 60 266.9 Bayonet 500 500 Nickel 44Dual Crimp Commercial (RG-58C/U) BNC 50 4 -55° to +85° 60 266.9 Bayonet 500 500 Nickel 44Hex Crimp (RG-58C/U) BNC 50 4 -65° to +165° 40 177.9 Bayonet 500 500 Nickel 44Field Serviceable (RG-142B/U) BNC 75 2 -65° to +85° 60 266.9 Bayonet 500 500 Nickel 4475 Ohm (RG-59B/U) Twin BNC Non- — -55° to +85° 25 111.2 Bayonet 500 200 Silver or Nickel 89constant (RG-108/U) F Series 75 — -55° to +85° (Series 59, 6, 7 — Threaded (F) 500 200 Nickel 93 Single Braid) G Series 75 — -55° to +85° (Series 59, 6, 7 — Push-On (G) 500 200 Nickel 93 Single Braid) SMA 50 26.5 -65° to +105° 60 266.9 Threaded 500 500 Gold or Passivated 100Semi-Rigid (RG-402/U) Stainless Steel SMA 50 12.4 -65° to +165° 40 177.9 Threaded 500 500 Gold or Passivated 100Flexible (RG-58C/U) Stainless Steel SMP 50 40 -65° to +165° 20 89 Snap-On 500 100 Gold 152(RG-405/U) OSP 50 22 -65° to +125° 60 267.02 Push-On 500 5000 Gold or Passivated 157Semi-Rigid (RG-402/U) Stainless Steel OSP 50 12.4 -65° to +125° 40 178 Push-On 335 5000 Gold or Passivated 157Flexible (RG-58/U) Stainless Steel OSSP 50 28 -65° to +125° 20 89 Push-On 335 5000 Gold or Passivated 169Semi-Rigid (RG-405/U) Stainless Steel OSSP 50 — -65° to +125° 20 89 Push-On 250 5000 Gold or Passivated 169Flexible (RG-316/U) Stainless Steel SMB 50 4 -65° to +85° 20 89 Snap-On 335 500 Nickel 176(RG-316/U) SMC 50 10 -65° to +85° 20 89 Threaded 250 500 Gold 193(RG-174/U) 50 6 -65° to +165° 20 32 Snap-On 500 500 Nickel 196MCX (RG-316/U) Connectors 20 32 Snap-On 500 500 Nickel 19675 6 -65° to +165° (RG-187/U) SMT Quick Grip 50 3 -40° to +125° Omni-Flex — Snap-On 250 5 Gold 207 SSMT 50 6 -40° to +125° Omni-Flex — Snap-On 250 100 Gold 212 MMCX 50 6 -55° to +155° 10 44.5 Snap-On 500 500 Gold 218(RG-178/U) Mini BNC 75 2 -40° to +85° 20 — Bayonet 300 500 Nickel 78(735A) QMA 50 6 -40° to +125° 20 — Quick Lock 335 100 Nickel 124(RG-316/U) Comp. Coax 50 4 -40° to +125° N/A — N/A 125 25 Gold 204 50 10 -40° to +85° — — Thread/ 500 500 — 129 DIN 1.0/2.3 Snap/Slide — — Thread/ 500 500 — 12975 2 -40° to +85° Snap/Slide Switching Coax 50 2.4 — N/A — N/A — 30,000 — 229 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors 7-16 Series Connectors Product Facts ■ Designed for cellular base- stations, control component, antenna and broadcast

applications

■ Available in White Bronze plating ■ Minimizes Intermodulation Distortion by the use of non-ferrous materials ■ Hex knurl for wrench tightening ■ Available for several popular RG cable sizes in solder-clamp and crimp- crimp attachment styles Tyco Electronics offers a comprehensive range of 7-16 Connectors to suit today’s challenging Wireless Infrastructure Market. This market demands reliable, intermodulation sensitive connectors that accommo- date higher power. Tyco Electronics 7-16 Coaxial Connector Series provides reliable, intermod- ulation- minimizing solutions that also provide a logical alternative to N Series con- nectors in high power appli- cations where a more rugged interface design is required. Typical examples of this include transmitter to antenna links and channel switching networks. The 7-16 Series conforms to CECC 22190 and IEC 169-4 specification standards and has a 2.7kV working voltage at the connector interface and maximum power handling capability of 4kW. The series has been designed for these demanding environments and can withstand a mini- mum of 500 mating cycles. Popular RG cable sizes are covered in both solder/clamp and crimp attachment styles. Two piece combination connec- tors adapt to straight or right-angle configurations, minimizing the number of different part codes needed by the customer. Series N to 7-16 between series adapters facilitate the transi- tion between system inter- faces as well as providing a test interface. The increased customer demand for greater channel capacity combined with increased sensitivity of receivers has exposed the IMD (Intermodulation Distortion) phenomenon. To address this problem 7-16 Connectors have been designed to reduce IMD through the use of non- ferrous base materials and by silver plating of the elec- trical path. The proprietary White Bronze plating tech- nique is standard, providing high corrosion resistance, low porosity, scratch resistance, low RF loss and a non-magnetic finish. Incorporation of hex-knurl coupling nuts allow for hand or wrench tightening of connectors, depending upon the application. Tyco Electronics is a global ISO 9001 certified manufacturer and maintains a complete in-house Intermodulation Testing facility. Connector part numbers shown form just a small part of the extensive interconnect package that Tyco Electronics offers for the professional wireless and telecom markets. Related Product Data N Connectors — Pages 20-25 Application Notes — White Bronze — Appendix B Intermodulation — Appendix C Between Series Adapters For 7-16 Series Between Series Adapters, see pages 251-260.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors 7-16 Series Connectors (Continued) Materials Female Contacts (inner and outer) Beryllium Copper Other Metal Parts Brass Insulators Fluorocarbon Polymer Gaskets Silicone Rubber Finishes Parts in the electrical path Silver over copper Other Metal Parts White Bronze Electrical Frequency Range DC-7GHz Impedance 50 Ohms Insulation Resistance 10,000 Megohms Minimum 2.7kV (connector) Maximum Working Voltage rms (sea level) 1.4kV (versions for RG 213, 214 and 393) Maximum Proof Voltage rms (sea level) 2.7kV (connector) 1.4kV (versions for RG 213, 214 and 393) Center Contact Resistance 0.8 milliohm (max.) after conditioning Insertion Loss <1.5dB to 5 GHz VSWR 1.02 + 0.03f up to 7 GHz where f is measured in GHz Intermodulation Better than –150dBc Mechanical Coupling Torque 18.5 – 22 ft.-lbs. Proof Torque 25 ft.-lbs. Mechanical Endurance 500 mating cycles Environmental Temperature Rating –55°C to +155°C General Specifications

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors 7-16 Series Connectors (Continued) Straight Cable Plug Solder/Solder Ø 32.00 ± 0.20 [1.260 ± .008] 50.35 ± 0.50 [1.982 ± .020] 4.50 [.177] Typ. 23.50 [.925] Typ. Ø 16.50 ± 0.20 [.650 ± .008] Cable Type Body Plating Part No. 1/2" Corrugated White Bronze/ 1460159-1Gold 43.5 [1.71] 32.0 [1.26] Dia. Cable Type Body Plating Part No. RG 8A/U, RG 213/U White Bronze 6331959-1 RG 9B/U, RG 214/U White Bronze 6362765-1 43.0 [1.69] 34.3 [1.35] 32.0 [1.26] Dia. 36.0 [1.42] Assembled Cable Type Body Plating Part No. RG 58C/U, RG 141A/U White Bronze 6408028-1 RG 213/U White Bronze 6408030-1 RG 214/U White Bronze 6312113-1 36.0 [1.42] 32.0 [1.26] 43.0 [1.69] Right-Angle Cable Plug Solder/Crimp Straight Cable Plug Crimp/Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Cable Type Body Plating Part No. RG 8A/U, RG 213/U White Bronze 6408032-1 RG 9B/U, RG 214/U White Bronze 6408033-1 44.0 [1.73] 46.5 [1.83] 24.8 [0.98] 17.2 [0.68] 5.00 [0.20] Assembled 24.8 [0.98] 29.5 [1.16] Dia.3.70 [0.15] Dia 4 Holes. Mounting Detail Straight Panel Mount Cable Jacks Crimp/Crimp Panel Socket Launcher Body Plating Part No. White Bronze 6311225-1 White Bronze 1460052-2 21.6 [0.85] 5.00 [0.20] 24.8 [0.98] 24.8 [0.98] 29.5 [1.16] Dia.3.70 [0.15] Dia 4 Holes. Mounting Detail 7-16 Series Connectors (Continued) Right-Angle Cable Plug Solder/Clamp 43.0 [1.69] 32.0 [1.26] 23.2 [0.91] Cable Type Body Plating Part No. RG 55B/U, RG 58C/U, RG 141A/U, RG 142B/U, White Bronze 6408026-1 RG 223/U, RG 400/U T-Flex 402 Silver 6328873-1 43.0 [1.69] 32.0 [1.26] Dia. 47.2 [1.86] Cable Type Body Plating Part No. RG 213/U, RG 214/U, RG 393/U White Bronze 6408027-1 RG 8A/U, RG 9B/U, RG 213/U, RG 214/U White Bronze 6408038-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

7-16 Series Connectors (Continued) Right-Angle Panel Jack Solder/Clamp 46.3 [1.82] 24.8 [0.98] 17.2 [0.68] 5.00 [0.20] 24.8 [0.98] 29.5 [1.16] Dia. 47.2 [1.86] 3.70 [0.15] Dia 4 Holes. Mounting Detail Cable Type Body Plating Part No. RG 213/U, RG 214/U, RG 393 White Bronze 6408036-1 RG 58C/U, RG 142B/U, RG 223/U, RG 400/U White Bronze 6363527-1 46.3 [1.82] 24.8 [0.98] 17.2 [0.68] 5.00 [0.20] 34.2 [1.35] 24.8 [0.98] 29.5 [1.16] Dia. 36.7 [1.44] Assembled 3.70 [0.15] Dia 4 Holes. Mounting Detail Cable Type Body Plating Part No. RG 55B/U, RG 142B/U, RG 233/U, RG 400/U White Bronze 6363524-1 RG 8A/U, RG 213/U White Bronze 6363525-1 RG 9B/U, RG 214/U White Bronze 6363526-1 Combination Panel Jack Solder/Crimp Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors 49.0 [1.93] 33.0 [1.30] 14.0 [0.55] 45.0 [1.77] Max Panel Body Plating Part No. White Bronze 6408037-1 Bulkhead Adapter Jack/Jack Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Lightning and EMP Protection Devices Product Facts ■ Cellular operator protection against EMP (electro- magnetic pulses) caused by lightning strikes ■ Two different categories: Surge protectors and Quarter wave stub tuners ■ For use in cellular infra- structure including GSM, DCS 1800, and PCS 1900 systems ■ Incorporates Gas Discharge Tube (GDT) technology Tyco Electronics has devel- oped a unique series of Lightning and EMP protec- tion devices for use in cellu- lar infrastructure including GSM, DCS 1800, and PCS 1900 systems. These devices are designed to offer the cellular operator protection against EMP (electro-magnetic pulses) caused by lightning strikes. Direct or even near strikes produce fast rising electric fields within micro-seconds. These fields generate high voltage pulses through unprotected antennas and transmission lines which lead to the primary commu- nication equipment. High voltage pulses can cause extensive damage leading to costly repairs as well as significant loss of service to subscribers. These protec- tive devices come in two different categories: surge protectors and quarter wave stub tuners. To ensure that proper, low level contact resistance is established between the LP device and mounting wall, it is recommended that a min- imum torque of 50 in/lbs / 5.65 n/m be applied to tighten the connector mounting nut. A recom- mended minimum torque of 35 in/lbs / 3.95 n/m should also be applied for installa- tion of replacement surge protector capsules to ensure proper protection performance. In order to ensure that resultant currents from light- ning or EMP strikes do not interfere with parallel transmission lines within protected electronic equip- ment, surge protector devices must be installed with proper orientation. The surge protector side of the device should be mounted in the unprotected side of the equipment while the mounting nut is posi- tioned internally in the protected area. It is important when plan- ning lightning protection, that the user can estimate the potential number of direct strikes. This informa- tion may influence the type of device selected or the requirement for routine maintenance checks. Significant attention must be paid to the height of sup- porting structure as this, when related to the typical number of thunderstorms in a particular region, allows us to estimate the probabil- ity of a direct strike taking place. To assist our cus- tomers in this, the following table and chart has been included in this note. This should enable lightning pro- tection planners to establish the likelihood of direct strikes across a network anywhere in the world. Detailed application notes are available for proper selection of lightning pro- tection devices (surge pro- tectors & stub tuners) as well as intermodulation and White Bronze plating. Number of Thunderstorm hmax/m hmax/m hmax/m Days per year 10% 20% 50% 05 28 39 61 10 18 26 40 15 14 20 31 20 12 17 26 30 9.4 13 20 40 7.9 11 17 50 6.9 9.5 15 70 5.6 8.0 12 90 4.8 7.0 10.6 130 3.9 5.5 8.5 150 3.5 5.0 7.7 180 3.1 4.4 6.9 Table 1: Maximum height of supporting building for a given number of thunderstorm days (when hmax is exceeded, probability of direct strike to supporting building within 15 years is greater than 10% for hmax values given in second column, 20% for hmax values given in third column and 50% for hmax values given in the fourth column). Selecting your RF Coaxial Lightning Protection Device Between Series Adapters For 7-16 Series and N Series Between Series Adapters, please see pages 251-260.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Surge Protectors Advantages ■ Broadband ■ Allows DC bias on the transmission line. (critical for applications using mast top electronics.) ■ No harmonic passband ■ Ease of retrofitting antenna sights ■ GDT easily accessible for replacement Limitations ■ Routine maintenance recommended ■ 3 GHZ maximum frequency ■ Initial pass-through voltage Selection of a Lightning Protection Device At right are the basic advantages and limitations for both types of protection to use in the proper selec- tion for your application. These devices incorporate Gas Discharge Tube (GDT) technology. A GDT is a hermetically sealed tube containing an inert gas. The tube is inserted in the side of the device through an easily accessible weather sealed port. During normal operation the tube is inactive. When an installation is struck by lightning, a high voltage impulse will appear on the coaxial line. As the impulse amplitude rises, a level is reached where the impulse surpasses the dynamic voltage threshold of the tube and the electrodes arc over to discharge the energy to ground. Prior to activation of the tube, there will be a short period of time where energy will be present on the line. This residual pulse is equal to the dynamic voltage threshold of the tube. The maxi- mum impulse voltage a tube can handle without discharging is referred to as the impulse sparkover voltage. This capacity of the GDT is quoted as follows: Characteristic Symbol Definition Impulse Typical Value Impulse Dynamic sparkover U zdyn voltage 1kV/ µS 650V voltage threshold In the case of the referenced chart, the voltage will rise at one kilovolt per microsecond and the tube will fire after 650 nanoseconds. During activation a small percentage of voltage (called arc voltage) will still pass through. This will be approxi- mately 30 volts. When the pulse subsides, the tube again becomes inactive leaving a small residual voltage on the line. A direct lightning strike results in an impulse current of high amplitude. The capability of a device to protect a system is defined as the impulse discharge current rating. This is defined as the peak current of an impulse which the device can withstand ten times (5 at each polarity at fixed intervals) without affecting the device. maximum impulse discharge current is the peak current of an impulse the device can withstand once. Surge protectors are often used in applica- tions requiring a standing DC line voltage. This is typical in applications with mast top electronics. The maximum voltage capacity of a surge protector prior to it surpassing the static voltage threshold and discharg- ing it to ground is defined as its D.C. Product Facts ■ Excellent for Broadband Frequency Applications ■ Field Replaceable Gas Discharge Tube ■ Available Interfaces Facilitate Retrofit Capabilities ■ Low VSWR up to 2.5GHz ■ Specialized White Bronze Finish

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Surge Protectors (Continued) sparkover voltage. This capacity is quoted as follows: Characteristic Symbol Definition Impulse Typical Value d.c. Static sparkover U zstat voltage n/a 230V voltage threshold In these applications it is important to select a device that will assure the tube can return to its inactive state after the passage of a surge. This feature of the Surge protector is known as the holdover voltage. If the device continues to conduct, the protected line will be short circuited and the tube will heat up (glow mode). If left in this state, the tube can overheat and destruct. GDT’s have a finite life span which is inversely proportional to the energy dissipated. At extremes it is possible to reach a level where the tube is unable to discharge all the energy and is destroyed. It is therefore necessary to schedule rou- tine maintenance checks and periodically replace the tube within the surge protector. Surge protectors offer excellent lightning protection for broadband systems and are usable up to 3 GHz. Standard interfaces include 7-16, N, and SMA. Configurations include straight and bulkhead mounted adapters which allows for ease of assimila- tion into existing systems. Requirement Detail Electrical Frequency Range DC to 3GHz Impedance 50 Ω VSWR Performance ≤ 1.33:1 Insertion Loss (Typical) 0.45dB Impulse Discharge Current (8/20µs, multiple strike) 20kA Maximum Impulse Discharge Current (8/20µs, single strike) 50kA Dynamic Sparkover Voltage, NEMP (1kV/µs) 2,000V Dynamic Sparkover Voltage, LEMP (1kV/µs) 800V Dynamic Sparkover Voltage, Static (<100V/µs) 90V* Materials Body Parts Brass Gaskets Silicone Rubber Female Contacts Beryllium Copper Male Contacts Brass Insulators P .T.F .E. Environmental Operating Temperature Range -45° C to +85° C Relative Humidity up to 100% * Determined by gas tube used, can be higher than value shown. Specifications Frequency Range DC to 3GHz Contact Plating Gold Body Plating White Bronze Max Panel 10.00mm Compliant With CECC22210/ CEC22110 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm both ends Endurance 500 Matings Recommended Mounting Hole 53.8 [2.12] 13.6 [0.54] Ref. 25.4 [1.00] Sq. 21.5 [0.85] Ref. 14.0 [0.55] 16.0 [0.63] Dia. N Series Jack to SMA Bulkhead Jack Adapter Part Number 6312079-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Surge Protectors (Continued) Frequency Range DC to 3.0 GHz Contact Plating Gold Body Plating White Bronze Max Panel 10.00mm Compliant With CECC22210 Coupling Torque 0.7-1.1 Nm Proof Torque 1.7 Nm Endurance 500 Matings Recommended Mounting Hole 53.8 [2.12] Ref. 25.4 [1.00] Sq. 16.0 [.063] Dia. 13.6 [.054] N Series Jack to N Series Bulkhead Jack Adapter Part Number 6312138-1 Frequency Range DC to 3.0 GHz Contact Plating Silver Body Plating White Bronze Compliant With CECC22190 Coupling Torque 25 - 30 Nm Proof Torque 35Nm Endurance 500 Matings 31.9 [1.25] 56.5 [2.23] Ref. 34.0 [1.34] Dia. Ref. 7-16 Plug to 7-16 Jack Adapter Part Number 6312121-1 d.c. Sparkover Voltage: 230V ± 46V Impulse Sparkover Voltage: 700V typ. (1kV/mS) (900V max) Glow Discharge Voltage: 72V Arc Discharge Voltage: 10V a.c. Discharge Current: 20A (1 sec, 50Hz) Impulse Discharge Current: 20kA (50kA for (8/20mS waveform) one strike) Insulation Resistance (@100V): 10GW Capacitance: 2pF Gas Discharge Tube Replacement Part Number 1402314-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

λ/4 Stub Tuners Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors These devices are three port coaxial connectors. The third port extending from the main through path is terminated in a short circuit at a pre-deter- mined distance calculated to be exactly one quarter wave- length at the desired center frequency (see graph). Unlike surge protectors, this design eliminates concerns about residual pulse, sparkover voltage and resid- ual voltage ensuring greater protection for sensitive electronic equipment. As opposed to surge protec- tors, stub tuners will absorb lightning strikes without need for replacing compo- nents. These devices yield very low VSWR and feature high attenuation within a rel- atively narrow pass-band (+/- 70 MHz) but are appli- cation specific. Stub tuners also pass energy in bands that are harmonically related to the fundamental center frequency. The graphs below show a typical test impulse and the response of a stub tuner. Stub tuners are classified into two broad categories— simple and broadband. The simple stub tuner exhibits a V-shaped response on the VSWR vs. frequency plot. The trough of the V is designed to occur at the required Fo and the band- width is restricted to approx- imately 8%. The broadband tuner employs extra RF tech- niques, similar to multiple cavity filtering, which increase the effective band- width by approximately 20%. Tyco Electronics offers a wide variety of stub tuners for the most popular fre- quency bands to facilitate purchase without need for custom design and manu- facturing. Designs exist for GSM, PCS 1900, DCS 1800 frequencies with standard industry interfaces includ- ing SMA, 7-16, and Type N. Configurations include cable assemblies, cabled connectors, and adapters for ease of assimilation into existing systems. Stub tuners are maintenance free since they incorporate no active components though it is recommended that a check of the stub tuner affixment be made following heavy discharges at an installation. Product Facts ■ Ideal for use with GSM, PCS and DCS ■ Maintenance Free Operation ■ Low VSWR Within Specified Bandwidth ■ Configurations include direct attachments to Cable variants ■ Optional White Bronze Finish li Vi Vr lr 0.3 1.0 1.9 0.5 V T1 = 1.67T T01 t 326.400 110.308 Vk A 244.800 94.5588 Vk A 163.200 78.8088 Vk A 81.6000 63.0588 Vk A 0.0 47.3088 uV kA -81.600 31.5588 Vk A -163.20 15.8088 Vk A -244.80 58.80 VA -326.40 -15.691 Vk A -640.0nS, 80.033280 V 10.98uS, 49.45920kA λ/4 Shorting Stub Basics Typical Test Impulse Typical λ/4 Test Response Advantages ■ Low VSWR in pass- band ■ Minimal maintenance ■ Pass-through voltage eliminated ■ No sparkover or resid- ual voltage concerns ■ Ease of retro-fitting antenna sights Limitations ■ Frequency specific ■ Harmonic passband ■ Does not allow DC bias on transmission line

λ/4 Stub Tuners (Continued) Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Requirement Detail (Type-N, 7-16) Electrical Impedance 50 Ω VSWR Performance in Band ≤1.2:1 Insertion Loss (Typical) 0.2dB DC Resistance (stub outer to inner) 1m Ω Dynamic Voltage @ 250A/ms ≤15V Residual Voltage @ 2500A, 8/20µs ≤15V Outer Conductor Contact Resistance 10m Ω DC Resistance (through-path center contact) 100m Ω Materials Body parts Brass Gasket Silicone Rubber Female contacts Beryllium Copper Male Contacts Brass Insulators P .T.F .E. Environmental Operating temperature range -45°C to +85°C Relative humidity (non-condensing) up to 100% Bandwidth ± 70 MHz Center Frequency 1795 MHz Contact Plating Silver Body Plating Silver Max Panel 10.00mm Compliant With CECC22210 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm Endurance 500 Matings Recommended Mounting Hole 62.9 [2.48] 25.4 [1.00] Sq. Ref. 16.0 [0.63] Dia. 23.5 [0.92] Ref. 54.7 [2.15] Ref. 13.6 [0.54] 42.0 [1.65] Ref. DCS 1800 Type N Clamp Bulkhead Jack Cable Part No. T-Flex402 6329818-1 Bandwidth ± 70 MHz Center Frequency 1795 MHz Contact Plating Silver Body Plating White Bronze Max Panel 8.00mm Compliant With CECC22190 Coupling Torque 25 - 30Nm Proof Torque 35Nm Endurance 500 Matings Recommended Mounting Hole 77.6 [3.06] Ref. 44.6 [1.76] Ref. 67.0 [2.64] Ref. 44.9 [1.77] 30.5 [1.20] 3.20 [0.13] 17.5 [0.69] Dia. Ref. 7-16 Jack to 7-16 Bulkhead Jack Adapter Part Number 6361137-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

λ/4 Stub Tuners (Continued) Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Bandwidth ± 70 MHz Center Frequency 1795 MHz Contact Plating Silver Body Plating Silver Max Panel 10.00mm Compliant With CECC22210 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm Endurance 500 Matings Recommended Mounting Hole 62.9 [2.48] 23.5 [0.92] Ref. 25.4 [1.00] Sq. 42.0 [1.65] Ref. 54.7 [2.15] Ref. 16.0 [0.63] 13.6 [0.54] Ref. Dia. DCS 1800 (Continued) Type N Crimp Bulkhead Jack Cable Part No. RG58C/U 1329819-1 PCS 1900 Bandwidth ± 70 MHz Center Frequency 1920 MHz Contact Plating Silver Body Plating Silver Max Panel 10.00mm Compliant With CECC22210 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm Endurance 500 Matings Recommended Mounting Hole 62.9 [2.48] 25.4 [1.00] Sq. Ref. 16.0 [0.63] Dia. 23.5 [0.92] Ref. 52.9 [2.08] Ref. 13.6 [0.54] 40.2 [1.58] Ref. Type N Clamp Bulkhead Jack Cable Part No. T-Flex 402 1312137-1 Bandwidth ± 70 MHz Center Frequency 1795 MHz Contact Plating Silver Body Plating Silver Max Panel 10.00mm Compliant With CECC22210 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm Endurance 500 Matings Recommended Mounting Hole 57.3 [2.26] 25.4 [1.00] Sq. Ref. 16.0 [0.63] Dia. 23.5 [0.93] Ref. 10.0 [0.39] 54.7 [2.15] Ref. 13.6 [0.54] 42.0 [1.65] Ref. Type N Jack to Type N Bulkhead Jack Adapter Part Number 1361138-1 Bandwidth ± 70 MHz Center Frequency 925 MHz Contact Plating Silver Body Plating White Bronze Max Panel 8.00mm Compliant With CECC22190 Coupling Torque 25 - 30Nm Proof Torque 35Nm Endurance 500 Matings Recommended Mounting Hole 77.6 [3.06] 44.9 [1.77]Ref. 27.4 [10.8] Ref. 93.4 [3.68] Ref. 30.5 [1.20] 17.5 [0.69] 71.0 [2.79] Ref. Dia. Dia. Ref. GSM 7-16 Bulkhead Jack to 7-16 Bulkhead Jack Cable Part No. T-Flex 402 Cable 6408399-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

λ/4 Stub Tuners (Continued) Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Bandwidth ± 70 MHz Center Frequency 1920 MHz Contact Plating Silver Body Plating Silver Max Panel 10.00mm Compliant With CECC22210 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm Endurance 500 Matings Recommended Mounting Hole 62.9 [2.48] 25.4 [1.00] Sq. Ref. 16.0 [0.63] Dia. 23.5 [0.92] 52.9 [2.08] Ref. 13.6 [0.54] 40.2 [1.58] Ref. PCS 1900 (Continued) Type N Crimp Bulkhead Jack Cable Part No. RG58 C/U 6312139-1 Bandwidth 1920 MHz Center Frequency ± 70 MHz Contact Plating Silver Body Plating Silver Max Panel 8.00mm Compliant With CECC 22190 Coupling Torque 25-30 Nm Proof Torque 35 Nm Endurance 500 Matings Recommended Mounting Hole 38.0 [1.50] 72.7 [2.86] 24.6 [0.97] Ref. 4.00 [0.16] Dia. Ref.27.4 [1.08] Ref. 29.5 [1.16] Dia. 27.5 [1.08] 40.2 [1.58] Ref. Ref. Ref. 7-16 Clamp Bulkhead Jack Cable Part No. T-Flex402 6312123-1 Bandwidth 1920 MHz Center Frequency ± 70 MHz Contact Plating Silver Body Plating White Bronze Max Panel 8.00mm Compliant With CECC 22190 Coupling Torque 25-30 Nm Proof Torque 35 Nm Endurance 500 Matings Recommended Mounting Hole 77.6 [3.06] Ref. 44.9 [1.77] 17.5 [0.69] 30.5 [1.20] 42.2 [1.66] Ref. 64.6 [2.54] Ref. Dia. Ref. 7-16 Bulkhead Jack to 7-16 Bulkhead Jack Adapter Part Number 6312124-1 Bandwidth ± 70 MHz Center Frequency 1920 MHz Contact Plating Silver Body Plating Silver Max Panel 10.00mm Compliant With CECC22210 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm Endurance 500 Matings Recommended Mounting Hole 57.3 [2.26] 13.6 [0.54] Ref. 25.4 [1.00] Sq. 40.0 [1.58] Ref. 52.7 [2.08] Ref. 16.0 [0.63] Dia. Type N Bulkhead Jack to Type N Bulkhead Jack Adapter Part Number 6361139-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors N Series Connectors The Tyco Electronics N Connector, featuring a 15.88 [5/8] - 24 threaded coupling for optimum stability, is highly suited for critical applications and environments. This medium sized connector can with- stand shock and vibration to assure a low noise level and has a constant impedance of 50 ohms. It also features a captive center contact and provides excellent per- formance at frequencies up to 11 GHz, with voltages to 1000 volts rms. This Tyco Electronics con- nector offers the added benefits of low overall applied cost with a labor- saving two-crimp assembly. The contact is simply crimped to the cable’s center conductor, then both braid and cable support are simultaneously crimped to complete the termination. N Series Connectors are available in standard plug, jack, panel jack, bulkhead jack and right-angle plug configurations. Those connectors with a military designation (M39012) are furnished in accordance with all requirements of specifica- tion MIL-C-39012, Class II, Category B. Materials Brass — QQ-B-626 Beryllium Copper — QQ-C-530 Dielectric — TEFLON TEFLON —M IL-P-19468 Copper, Annealed— QQ-C-576 Phosphor Bronze — QQ-B-750 Silicone Rubber — ZZ-R-765 Plating Body — Silver per QQ-S-365 Nickel per QQ-N-290 Center Contact — Gold per MIL-B-45204

Electrical Characteristics

Nominal Impedance — 50 ohms Working Voltage — 1000 volts, rms at sea level Frequency Range —0 to 11 GHz Voltage Standing Wave Ratio (VSWR) — Straight Plug or Jack — 1.3:1 max. Right-Angle Plug — 1.35 max. at 0 to 9.0 GHz 1.50 max. at 9.0 to 11.0 GHz Contact Resistance — Outer Contact — 0.2 milliohms Center Contact — 1.0 milliohms Right-Angle — 2.5 milliohms Insulation Resistance — 5000 megohms min. Dielectric Withstanding Voltage —

2500 Volts, rms at sea level

RF Leakage —M IL Type, -90 dB min. at 2 to 3 GHz RF Insertion Loss —M IL Type, 0.15 dB max. at 10 GHz Right-Angle Plug, 0.3 dB max. at

10 GHz

Corona Level —M IL Type, 500 volts min. at 21 336 m [70,000 ft.] Terminator — Resistance — 50 ohms ±1% Power Rating — 1.0 watt max. Product Facts ■ Designated connectors are MIL-C-39012, Class II, Category B qualified ■ Captive center contacts ■ Completely crimpable application – one hand tool crimps all cables with single or double braided shields of a given size ■ Impedance matching crimps ■ Broad band performance – low VSWR ■ Superior cable retention ■ TEFLON dielectric ■ Silver or nickel finish ■ Fully intermateable with MIL-C-39012 connectors ■ Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ Certified by Canadian Standards Association File No. LR 7189 R R R Mechanical Characteristics Mating/Unmating— Threaded cou- pling Cable Attachment— Crimp type - center contact and braid Coupling Nut Retention — 445 N [100 lbs.] min. Cable Retention — 400 N [90 lbs.] min. RG 214/U Cable Durability — 500 cycles per MIL-C- 39012 Captive Contact — 27 N [6 lbs.] min. axial retention, either direction Environmental Characteristics Temperature Range — MIL Type, -65°C to +165°C Commercial, -55°C to +85°C Vibration — MIL-STD-202, Method 204, Test Cond. B Shock — MIL-STD-202, Method 213, Test Cond. I Moisture Resistance — MIL-STD-

202 Method 106

Salt Spray — MIL-STD-202, Method 101, Test Cond B Temperature Cycling —M IL-STD- 202, Method 107, Test Cond. B (except high temperature is +85°C) Note: All data pertains to use with MIL-C- 39012 specified cables only. Between Series Adapters For N Series Between Series Adapters, see pages 251-260. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) Plugs M39012/RG/U Termination Body Military No. and/ Dim. Integral Die Hex Across Flats Notes Part No.Cable Type Plating or Comments L Hand Tool Center Braid O Crimp Nickel Knurl Collar 42.85 220045-2 — — 1 1-5225661-258, 58A, 1.687 58B, 58C O Crimp Silver Knurl Collar 42.85 220045-2 — — 1 5225361-11.687 O Crimp Nickel Knurl Collar 42.85 220045-2 — — 1 1-5225661-3223, 1.687 55, 55A, 55B O Crimp Silver Knurl Collar 42.85 220045-2 — — 1 5225361-21.687 Knurl Collar 42.85 220045-2 — — 1, 3 5225392-2142, 142A O Crimp Silver 1.687 142B, 400 42.85Knurl Collar 1.687 220045-2 — — 1 5225361-4 O Crimp Nickel Knurl Collar 41.35 220045-2 — — 3 5225699-1142, 142A 1.628 115A, BELDEN 89880, O Crimp Nickel Knurl Collar 42.85 220015-1 — — 3 5225092-8 9880 1.687 402 Semi Rigid Solder Nickel Knurl Collar 24.6 —— — — 6057088-1(.141) .970 405 Semi Rigid Solder Nickel Knurl Collar 24.6 —— — — 6057094-1(.085) .970 O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 1-5227086-01.687 O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 5225661-2 8, 8A, 213 1.687 O Crimp Silver 01B0007 42.85 220015-1 — — 3 51692-2Knurl Collar 1.687 O Crimp Nickel Knurl Collar 47.22 220015-1 — — 3 5225662-21.859 11, 11A, 216 O Crimp Silver 01B0013 42.85 220015-1 — — 3 51692-4Knurl Collar 1.687 BELDEN 9292 O Crimp Nickel — 47.22 220015-1 — — 3 1-5225662-81.859 BELDEN 8214 O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 1-5225661-61.687 O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 5225661-19, 9A, 9B, 1.687 214 O Crimp Silver 01B0008 42.85 220015-1 — — 3 51692-1Knurl Collar 1.687 LMR 240 Hex/Solder Silver Hex Collar 29.74 —— 6.81 — 6274532-11.171 .268 Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used. 2 Die Set Crimp Tool — PRO-CRI MPER II Hand Tool, P/N 354940-1 or 626 Series Pneumatic Tool with 679304-1. 3 Weatherproof. L Max. 19.05 [.750] Dia. Max. MIL Type Dual Crimp L Max. 21.01 [.827] Dia. Max. Semi-Rigid Cable L Max. 21.01 [.827] Dia. Max. Hex Dual Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) 21.01 [.827] Dia. Max. 35.86 [1.412] Max. L Max. Right-Angle Plugs, Crimp Jacks L Max. 15.93 [.627] Dia. Max. M39012/RG/U Termination Body Military No. and/ Dim. Integral Die Hex Across Flats Notes Part No.Cable Type Plating or Comments L Hand Tool Center Braid O Crimp Nickel Knurl Collar 57.79 220015-1 — — — 5225669-2 8, 8A, 213 2.275 O Crimp Silver 05B0002 57.79 220015-1 — — — 225014-2Knurl Collar 2.275 393 O Crimp Silver Knurl Collar 62.31 220015-1 — — 1,3 225389-62.453 O Crimp Nickel Knurl Collar 57.79 220015-1 — — — 5225669-19, 9A, 9B 2.275 214 O Crimp Silver 05B0003 57.79 220015-1 — — — 225014-3Knurl Collar 2.275 Notes: 1 Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit 1725837-1, or SDE Electric Terminator 1490076-2. 3 Weatherproof. M39012/RG/U Termination Body Military No. and/ Dim. Integral Die Hex Across Flats Notes Part No.Cable Type Plating or Comments L Hand Tool Center Braid 58A, 58C O Crimp Nickel — 44.83 220045-2 — — 2, 3 1-5225664-21.765 8, 8A, O Crimp Silver 02B0008 49.20 220015-1 — — 3 225093-2213 1.937 8, 213 O Crimp Nickel — 49.20 220015-1 — — 2, 3 5225664-21.937 9, 9A, 9B, O Crimp Silver 02B0009 49.20 220015-1 — — — 225093-1214 1.937 9, 214 O Crimp Nickel — 49.20 220015-1 — — 2, 3 5225664-11.937 402 Semi Solder Nickel — 26.70 —— — — 6057116-1Rigid (.141) 1.051 Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used. 2 Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit 1725837-1, or SDE Electric Terminator 1490076-2. 3 Weatherproof. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp 13.51/13.79 [.532/.543] 16/16.38 [.630/.645] Dia. Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout L Max.Dia. Max. 22.48 [.885] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 16.26 [.640 ] Dia. +0.13 -0.25 +.005 -.010 13.72 [.540 ] +0.08 -0.2 +.003 -.008 12.88 [.507 ] Dia. +0.08 -0.05 +.003 -.002 5.59 [.220 ] +0.03 -0.05 +.001 -.002 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout M39012/ RG/U Termination Body Military No. Dim. Integral Die Part No.Cable Type Plating and/or L Hand Tool Comments Crimp Nickel Rear Mount 29.37 * 228658-11.156 402 Solder Pass. Gold Rear Mount — * 6057159-1Semi-Rigid/.141 Solder Nickel Rear Mount 25.4 — 6057176-11.00 405 Solder Nickel Rear Mount 33.9 — 6057165-1Semi-Rigid/.085 1.335 *Tooling—Hand Tool No. 59980-1, Requires (2) Crimping Dies No. 312253-1 and (1) Locator No. 220220-2. Bulkhead Jacks for Semi-Rigid Cable 22.86 [.900] Dia. Max. L Max. 16.1 [.630] Dia. Max. L Max. Rear Mount Hex Across FlatsRG/U Termination Body Dim. Integral Die Notes Part No.Cable Type Plating L Hand Tool Center Braid 58, 58A, 58B, O Crimp Silver 49.61 220045-2 — — 1 5225363-158C, LMR195 1.953 124, 140, 210, 62, 62A, 62B, 59, 59A, O Crimp Nickel 49.61 220045-3 — — — 1-5225667-659B, BELDEN 9291, 1.953 9209, 9269, 89269 8, 213 O Crimp Silver 53.98 220015-1 — — 2, 3 225094-22.125 393 O Crimp Nickel 53.98 220015-1 — — 2, 3 1-225668-12.125 9, 214 O Crimp Silver 53.98 220015-1 — — 2, 3 225094-12.125 Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used. 2 Die Assembly compatible with Crimp Tool — PR O-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit 1725837-1, or SDE Electric Terminator 1490076-2. 3 Weatherproof. Front Mount Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) 16.25 [.640] 3.17 [.125] Dia. (4 Holes) Min. 18.24 ± .013 [.718 ± .005] 18.24 ± .013 [.718 ± .005] Recommended Panel Cutout Panel Jacks, Solder Panel Plug, Solder Jack, Panel Mount Hex Across FlatsRG/U Termination Body Dim. Integral Die Notes Part No.Cable Type Plating L Hand Tool Center Braid RG 225 O Crimp Silver 49.20 220015-1 — — 3 5225089-41.937 Note: 3 Weatherproof. Body Plating Part No. Nickel 1057284-1 Nickel 1057290-1* *No solder cup — dielectric protrudes. Body Plating Part No. Nickel 1057275-1 Nickel 1057279-1* Nickel 1057277-1* *No solder cup — dielectric protrudes. 25.40 [1.000] L Max. Dia. Min. 25.0 [.986] 18.7 [.736] 2.0 [.080] 25.4 [1.000] Sq. 9.6 [.377] Ref. 18.2 [.718] Typ. Ø 3.2 [.125] Dia.3.0 [.120] Dia.2.5 [.098] Dia. 4 Plcs. 27.2 [1.070] 20.8 [.819] 2.0 [.080] 25.4 [1.000] Sq. 18.2 [.718] Typ. Ø 3.2 [.125] Ø 2.5 [.098] Ø 3.0 [.120] 4 Plcs. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) Inter-Series Adapters Feedthru Jack Adapter (Jack-Jack) Plating Body — Nickel Dielectric — General purpose polypropylene Contact — Gold plated Part Number 227945-2 Dia. Max. 15.93 [.627] Max.45.22 [1.780] Type Body Contact Dielectric Part No.Plating Jack-Plug Stainless steel/ Gold TEFLON 1057374-1passivate 50.69 [1.996] Jack-Plug Panel Mount Jack, Press-Fit Panel Mount Jack, Screw-In Body Contact Dielectric Part No.Plating White bronze Gold PTFE 1460055-1 Body Contact Dielectric Part No.Plating White bronze Gold PTFE 1460118-11 White bronze Gold PTFE 1460118-22 White bronze Gold PTFE 1460118-33 Notes: 1. Without TUF-LOC Adhesive 2. With TUF-LOC Adhesive around M3 thread 3. With TUF-LOC Spot on M3 thread 2.50 ± 0.10 [.098 ± .004] 6.00 ± 0.10 [.236 ± .004] Ø 15.80 ± 0.10 [.622 ± .004] Ø 14.35 ± 0.05 [.565 ± .002] 5/8-24 UNEF-2A 5.15 ± 0.20 [.203 ± .008] 24.80 ± 0.20 [.976 ± .008] 8.70 ± 0.30 [.343 ± .012] + 0.09 – 0.05 + .004 – .002 9.10 [.358 ] 19.00 ± 0.10 [.748 ± .004] Hex. 23.30 ± 0.20 [.917 ± .008] 5.00 ± 0.10 [.197 ± .004] 16.30 ± 0.20 [.642 ± .008] M16 x 1 Ø 14.90 ± 0.10 [.587 ± .004] 5/8-24 UNEF-2A Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Quick Lock N (QLN) Series Connectors RF Coax Connectors Product Facts ■ Similar performance and applications to standard N Series ■ Time saving and user friendly snap on/off mating ■ Excellent performance to

6 GHz

■ No torquing of connector required ■ Free rotation of mated connection ■ Higher packaging density can be achieved ■ Fully compatible with Huber&Suhner and Radiall QN Series QLF ® connectors* * QN and QLF are registered trademarks of Huber&Suhner, Inc. and Radiall S.A.. Huber&Suhner, Inc. and Radiall S.A. are not affiliated with the QLN product.

Description

Snap-on version of the pop- ular N Series connector ■ Snap-on interface facilitates assembly ■ Same dependable performance as standard N connector ■ Cellular & PCS Base Stations ■ Broadcast equipment ■ Telephony applications, WLAN ■ Instrumentation and remote measuring equipment ■ Mil Aero, SatCom, Radar Related Product Data Internet — http://tycoelectronics.com/products/rfcoax Product Specification/Design Objectives — 108-2281 Material and Finish Shell — Brass, plated white bronze Male Pin Center Contact — Brass, plated gold Female Socket Center Contact — Beryllium copper, plated gold Outer Contact — Phosphor bronze, plated white bronze Insulators — PTFE or PFA Characteristic Impedance — 50 ohms Frequency Range — DC to 6 GHz Voltage Standing Wave Ratio (VSWR) — 1.12 max. DC to 3 GHz Insertion Loss — 0.15 dB max. DC to 3 GHz Rated Voltage — 1000 VAC rms,

50 Hz (at sea level)

Insulation Resistance — 5000 megohms min. Contact Resistance — Center Contact — 1.5 milliohms max. Outer Contact — 1.5 milliohms max. Mechanical Characteristics Engagement Force — 30 N typical Disengagement Force— 30 N typical Interface Retention Force — 450 N min. Contact Captivation — 28 N min. Durability — 100 cycles min. Environmental Characteristics Operating Temperature — –40°C to +125°C (cable dependent) Thermal Shock — IEC 60169 para. 16.4 Corrosion — MIL-STD-202, Method 101, Condition B Vibration — IEC-1169-1 para. 9.3.3 (10-500 Hz, 5g) IP Rating for Interface — IP68 (connector dependent)

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Quick Lock N (QLN) Series Connectors (Continued) RF Coax Connectors Semi-Rigid Cable — Direct Solder Attachment Straight Cable Plug Cable Part No. RG 402 1274805-1 34.29 [1.35] Ref. Bulkhead Cable Jack Cable Part No. RG 402 1274806-1 38.10 [1.50] Ref. Flexible Cable — Crimp Attachment Straight Cable Plug Cable Part No. RG 58 1274688-1 RG 142 1274688-2 LMR 240 1274688-3 30.48 [1.20] Ref. Right-Angle Cable Plug Cable Part No. RG 58 1274804-1 RG 142 1274804-2 LMR 240 1274804-3 36.58 [1.44] Ref. Bulkhead Cable Jack Cable Part No. RG 58 1274734-1 RG 142 1274734-2 LMR 240 1274734-3 34.54 [1.36] Ref. 4-Hole Square Flange Cable Jack Cable Part No. RG 58 1274735-1 RG 142 1274735-2 LMR 240 1274735-3 34.54 [1.36] Ref. Straight Cable Jack Cable Part No. RG 58 1274689-1 RG 142 1274689-2 LMR 240 1274689-3 26.92 [1.06] Ref. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Quick Lock N (QLN) Series Connectors (Continued) RF Coax Connectors Panel Mount Receptacles Press-Fit Bulkhead Jack Receptacle — Solder Terminal Part Number 1274807-1 20.07 [.790] Ref. Ø 15.24 [.600] Ref. 4-Hole Flange Jack Receptacle — Solder Terminal Part Number 1274662-1 24.89 [.980] Ref. 17.53 [.690] Sq. Ref.20.07 [.790] Ref. Adapters — Between Series QLN Plug to N Series Jack Part Number 1274808-1 41.91 [1.65] 9.53 [.375] Ref. N Series Jack QLN Plug Wrench Flats Ø 18.42 [.725] Ref. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors The Tyco Electronics TNC RF connector family, with 7/16-28 threaded cou- plings, provides low noise levels and optimum stability, and can withstand the shock and vibration often present in hostile environ- ments. Available in both 50 and 75 ohm versions, these connectors feature numer- ous styles including cable plugs and jacks, adapters and printed circuit board connectors. These connec- tors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C-39012 specifications. Single crimp connectors provide reduced applica- tion time and lower applied costs. This is accomplished by using Tyco Electronics one-crimp operation tooling which simultaneously termi- nates the inner conductor, outer braid and cable support with one controlled stroke. Tyco Electronics can also supply low-cost alternatives with a commercial type product line. These connec- tors are designed around the mil-specifications, offer- ing comparable mechanical and electrical performance. Product Facts Hex Crimp and O Crimp Connectors ■ 50 and 75 ohm commercial versions available ■ Provides excellent perfor- mance at frequencies up to 7 GHz ■ Low cost commercial type available ■ Commercial type is smaller and lighter weight ■ Tarnish resistant nickel finish ■ Choice of dielectric materials ■ Standard and weatherproof versions available ■ Plugs available for high temperature cable Single Crimp Connectors ■ Fast application–one crimping operation terminates inner conductor, outer braid and cable support ■ Low application cost Connectors for Semi-Rigid Cable ■ Crimp and solder versions available ■ Standard cable stripping dimensions ■ Universal cable termination common to all configurations Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 PC Board connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 Certified by Canadian Standards Association File No. LR 7189 R R R Related Product Data Military Category — All crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging — All Mil-Type connectors are packaged individually and all Commercial connectors are bulk pack- aged unless otherwise noted. Between Series Adapters For TNC Between Series Adapters, see pages 251-260.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors (Continued) Single Category B Commercial Commercial Characteristics Crimp O Crimp O Crimp Commercial Solder Semi-Rigid Solder (MIL Type) (MIL Type) & Hex Crimp PCB Jacks Clamp 50 & 75 Ohm Electrical Impedance, Nom. 50 50 50 50 50 50 50(Ohms) Working Voltage 500 500 500 500 500 335 500(Volts RMS) Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 (Megohms) Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500Voltage (VAC) (Picocoulombs) @ 375 VRMS @ 375 VRMS @ 375 VRMS @ 375 VRMS @ 375 VRMS RF Leakage, Max. — 60 @ 55 @ —— 60 @ 55 @ (dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz RF Insertion Loss, — 0.18 @ 0.2 @ —— 0.06 @ 0.2 @ Max. (dB) 9 GHz 3 GHz 3-6 GHz 3 GHz Frequency Range 0-4 0-11 0-7 0-4 0-4 0-15 0-11(GHz) Range Max. 4 GHz Mechanical Force to Engage/ 10/2 2/2 6/6 — — 2 2 Coupling Nut Retention, 100 100 60 —— 100 100 Cable Retention, 60 [266.9] 60 [266.9] 60 [266.9] 60 [266.9] — 60 40 lbs. [N] RG 58C/U RG 58C/U RG 58C/U (PCB Ret) [266.9] [178.0] Durability (Cycles) 500 500 500 500 500 500 500 Jam Nut Mounting Torque, 25 25 25 25 25 25 25 Environmental Temperature Range, -65 to +85 -65 to +1651 -55 to +85 -55 to +85 -65 to +165 -65 to +105 -65 to +165Operating (C°) -55 to +85 2 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 Vibration Method 204 Method 204 Method 204 Method 201A Method 204 Method 202 Method 202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 Physical Shock Method 213 Method 213 Method 213 Method 213 Method 213 Method 213 Method 213 MIL-STD-202 MIL-STD-202 MIL-STD-20 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202Thermal Shock Method 107 Method 107Method 107 Cond. B Cond. A Method 107 Method 107 Method 107 Method 107 Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202Method 106Resistance Method 106 Method 106 Type II Method 106 Method 106 Method 106 Method 106 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 Salt Spray Method 101 Method 101 Method 101 Method 101 Method 101 Method 101 Method 101 Product — 108-12001 108-12046 — — 108-12032 —Specification 1Assembled to cable with polytetrafluorethylene dielectric. 2Assembled to cable with polyethylene dielectric. Specifications

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors (Continued) Single Category B Commercial Commercial Characteristics Crimp O Crimp O Crimp Commercial Solder Semi-Rigid Solder (MIL Type) (MIL Type) & Hex Crimp PCB Jacks Clamp 50 & 75 Ohm Connector Material Collar Brass Brass Brass —— Brass Brass QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626 Phos. Bronze Phos. Bronze Outer Contact QQ-B-750 QQ-B-750 Brass —— Brass Brass (Plug) Beryl. Copper Beryl. Copper MIL-C-21768 QQ-B-626 QQ-B-626 QQ-C-530 QQ-C-530 Outer Contact Brass Brass Zinc Zinc Zinc Brass Brass (Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 QQ-B-626 QQ-B-626 Polyethylene TEFLON Dielectric TEFLON TEFLON Polypropylene Polypropylene MIL-P-19468 TEFLON TEFLON MIL-P-19468 MIL-P-19468 Gen. Purpose Gen. Purpose1 Polyester PBT MIL-P-19468 MIL-P-19468 MIL-P-24519 Center Contact Brass Brass Brass —— Brass Brass (Plug) QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626 (Jack) ASTM-B-643, ASTM-B-643, QQ-C-530 QQ-C-530 QQ-C-530 QQ-B-570 QQ-B-570 QQ-C-530 QQ-C-530 Gasket Silicon Rubber Silicon Rubber Silicon Rubber —— Silicone Rubber Silicone Rubber QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765 Ferrule Copper Copper Copper —— — —QQ-C-576 QQ-C-576 QQ-C-576 Connector Primary Finishes2 Collar Silver Silver Bright Nickel —— Nickel Nickel QQ-S-365 QQ-S-365 QQ-N-290 QQ-N-290 QQ-N-290 Outer Contact Silver Bright Nickel Bright or Bright Nickel Bright Nickel Nickel Nickel (Plug & Jack) QQ-S-365 QQ-N-290 Matte Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290QQ-N-290 Tin Lead, Tin Lead, Tin Lead, Center Contact Gold Silver ASTM-B-545 ASTM-B-545 ASTM-B-545 Gold Gold (Plug & Jack) MIL-G-45204 QQ-S-365 Silver, QQ-S-365 Silver, QQ-S-365 Silver, QQ-S-365 MIL-G-45204 MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 Ferrule Silver Gold Tin Lead —— — —QQ-S-365 MIL-G-45204 ASTM-B-5 1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519. 2If several finishes are listed, refer to individual catalog page(s) or customer drawings for exact specifications. Specifications (Continued) TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm Interchangeable CERTI-CRIMP Dies for RG/U Termination Center Body Dim. Hand Tool PRO-CRIMPER Contact Dielectric Style Hand Tool Part No.Cable Type Plating Plating L with 354940-1 or Comments Integral Die PRO-CRIMPER Adapter 679304-1 174, 188, Hex Crimp Gold Nickel Polypropylene Commercial — 31.24 — 58436-3 5222506-5188A, 316 1.230 179, 179A, 179B 31.24161, 187, 187A Hex Crimp Gold Nickel Polypropylene Commercial — — 58436-3 5222506-6 BELDEN 9221 1.230 Hex Crimp Gold Nickel Polypropylene Commercial — 31.25 — 58436-11 5222506-1 58, 58A, 58B, 58C 1.230 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 34.93 220045-2 — 5225555-21.375 142, 142A O Crimp Gold Nickel TEFLON MIL Type Weatherproof 34.93 220045-2 — 5225555-6142B, 400 1.375 8, 8A, 213 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 50.8 220015-1 — 5225555-72.000 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 50.8 220015-1 — 5225555-89, 9A, 9B, 214 2.000 1Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. Plugs, Crimp 13.21 Dia. [.520] Max. L Max. MIL Type O Crimp Weatherproof Hex Crimp and O Crimp 16.26 Dia. [.640] Max. L Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) 16.26 Dia. [.640] Max. 23.4 [.921] Max. Plugs for Semi Rigid-Cable 19.6 [.770] 16.5 [.650] Dia. Max. A Dia. B Dia. Ref. Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating A B 354940-1 or & 626 Pneu. Comments PRO-CRIMPER Head 318161-1 Adapter 679304-1 405 Solid 2.3 3.0Semi-Rigid/ Solder Gold Passivate PTFE MIL Type — .089 .120 — 3 1057635-1 2.18 [.086]

402 WeatherSemi-Rigid/ Crimp Gold Nickel TEFLON Commercial proof — 12 228179-3

3.66 [.141] 3.66 [.141] 1Hand Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 312644-1. 2Pneumatic Tool 58318-1, Requires (2) Crimping Dies 313720-1 and (1) Locator 312645-1. 3Refer to Recommended Assembly Tools in Tool Section. Crimp Type Solder Type Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Right-Angle Plugs, Crimp Interchangeable Dies for RG/U Termination Center Body Dim. CERTI-CRIMP PRO-CRIMPER Contact Dielectric Style Hand Tool Hand Tool Part No.Cable Type Plating Plating L with 354940-1 or Comments Integral Die PRO-CRIMPER Adapter 679304-1 174, 174A, 188 O Crimp Gold Nickel Polymethyl- Commercial — 38.23 — 318450-2 5414173-3188A, 316 pentene 1.505 58, 58A, 58B O Crimp Gold Nickel TEFLON MIL Type Weatherproof 47.63 220045-2 — 5225559-258C 1.875 55, 55A, 55B O Crimp Gold Nickel Polymethyl- Commercial — 38.23 — 220189-1 5414173-6223 pentene 1.505 142, 142A, 142B O Crimp Gold Silver TEFLON MIL Type Weatherproof 47.63 220045-2 — 5225554-6400 1.875 8, 8A, 213 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 63.5 220015-1 — 5225559-82.500 393, 225 O Crimp Gold Silver TEFLON MIL Type Weatherproof 63.5 220015-1 — 1-5225554-12.500 9, 9A, 9B, 214 O Crimp Gold Silver TEFLON MIL Type — 59.52 220015-1 — 5225349-92.343 O Crimp MIL Type O Crimp Weatherproof 16.26 Dia. [.640] Max. 31.75 [1.250] L Max. 13.21 Dia.[.520] L Max. 27.43 [1.080] Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Jacks, Crimp Interchangeable Dies for RG/U Termination Center Body Dim. CERTI-CRIMP PRO-CRIMPER Contact Dielectric Style Hand Tool Hand Tool Part No.Cable Type Plating Plating L with 354940-1 or Comments Integral Die PRO-CRIMPER Adapter 679304-1 174, 174A, 188 O Crimp Gold Nickel Polymethyl- Commercial — 30.48 — 318450-2 5414171-3188A, 316 pentene 1.200 58, 58A, 58B O Crimp Gold Silver TEFLON MIL Type 35.72 220045-2* — 225551-258C Weatherproof 1.406 141, 141A, 303 O Crimp Gold Silver TEFLON MIL Type 35.72 220045-2* — 225551-5Weatherproof 1.406 55, 55A, 55B O Crimp Gold Nickel Polymethyl- Commercial — 29.85 — 220189-1 414171-6223 pentene 1.175 142, 142A, 142B O Crimp Gold Silver TEFLON MIL Type Weatherproof 35.72 220045-2* — 225551-6400 1.406 *Battery, Pneumatic MIL Type O Crimp Weatherproof O Crimp L Max.11.43 Dia. [.450] Max. 11.43 Dia. [.450] Max. L Max. Jacks, Solder/Clamp 33.3 [1.31] 14.3 [.562] Dia. 12.7 [.500] A/F 11.1 [.437] A/F RG/U Termination Center Body Cable Type Contact Plating Dielectric Style Part No. Plating RG 58C/U, Solder/Clamp Gold Silver TEFLON MIL Type 1312569-1RG 141 A/U Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp Interchangeable Dies for RG/U Termination Center Body Dim. CERTI-CRIMP PRO-CRIMPER Contact Dielectric Style Hand Tool Hand Tool Part No.Cable Type Plating Plating L with 354940-1 or Comments Integral Die PRO-CRIMPER Adapter 679304-1 174, 174A, 316 O Crimp Gold Nickel Polymethyl- Commercial — 34.93 — 318450-2 5414168-3188, 188A pentene 1.375 179, 179A, 179B 38.1161, 187, 187A Single Gold Nickel TEFLON MIL Type — 1.500 — 91910-1 5331238 - BELDEN 9221 Crimp RD 188, 316 O Crimp Gold Nickel Polymethyl- Commercial — 34.93 — 58539-1 5414168-4Double Braid pentene 1.375 58, 58A, 58B, 58C O Crimp Gold Nickel Polymethyl- Commercial — 34.93 — 220189-1 5414168-1141, 141A, 303 pentene 1.375 223 Polymethyl- 34.93 55, 55A, 55B O Crimp Gold Nickel pentene Commercial — 1.375 — 220189-1 5414168-6 O Crimp Gold Nickel Polymethyl- Commercial — 34.93 — 220189-1 5414168-5142, 142A pentene 1.375 142B, 400 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 38.1 220045-2 — 5225557-61.500 Single Crimp O Crimp Maximum Panel Thickness Single Crimp 3.18 [.125]; Dual Crimp 6.35 [.250] Recommended Panel Cutout H L Max. H L Max. 5.54 [.218 ] +.008 -.000 +0.03 -0.00 12.83 Dia. [.505 ] +.013 -.000 +0.05 -0.00 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 5.54 [.218 ] +.008 -.000 +0.03 -0.00 +.013 -.000 +0.05 -0.00 H L Max. 30.5 [1.200] 12.1 [.475] Min. 12.7 [.500] A Dia. B Dia.Recommended Panel Cutout Dia. Min. 6.40 [.250] Max. Panel Ref. 15.9 [.625] Hex. 19.1 [.750] Hex. 20.9 [.821] RG/U Termination Center Body Dim. Cable Type Contact Plating Dielectric Style L Part No. Plating 402 Crimp Gold Nickel TEFLON MIL Type 25.4 228502-1Semi-Rigid/ 1.0003.66 [.141]* *Tooling—Hand Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 220220-2. RG/U Termination Center Body Dim. Dim. Cable Type Contact Plating Dielectric Style AB Part No. Plating Bulkhead Jacks for Semi-Rigid Cable, Rear Mount Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Panel Jacks, Crimp Recommended Panel Cutout 12.7 ±0.1 [.500 ±.004 ] 12.7 ±0.1 [.500 ±.004 ] 11.2 Dia. [.441] Min. 2.71 Dia. [.107] Min. Clearance for 3-56 Screws (4 Holes) 17.86 Sq. [.703] Max. L Max. 22.9 [.900] 16.3 [.642] 14.3 [.562] A Dia. B Dia. 17.5 [.687]Sq. 12.7 [.500] Typ. 3.20 [.125] Dia. 4 Plcs. Center CERTI-CRIMP RG/U Termination Contact Body Dielectric Style Dim. Hand Tool Part No.Cable Type Plating Plating L With Integral Die 58, 58A, Crimp Gold Silver TEFLON MIL Type 34.93 220045-2 225348-258B, 58C 1.375 RG/U Termination Center Body Dim. Dim. Cable Type Contact Plating Dielectric Style AB Part No. Plating Panel Jacks for Semi-Rigid Cable Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) (Top View) B 34.93 [1.375] Mtg. Hgt. 1/2-28 Thread 15.88 [.625] CL A B 34.93 [1.375] 1/2-28 Thread 15.88 [.625] Mtg. Hgt. Vertical PC Board/ Panel Mount Jacks VALOX Body Right-Angle PC Board/ Panel Mount Jacks *2-56 Self-Tapping Screws: For 1.57 [3/32] or greater panel thickness Part No. 221108-2 For less than 1.57 [3/32] panel thickness Part No. 221108-4 VALOX Body CL A B 34.93 [1.375] 15.88 [.625] Mtg. Hgt. Metal Body 5.54 [.218 ] +.008 -.000 +0.03 -0.00 12.83 [.505 ] Dia. +0.13 -.000 +0.05 -0.00 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 Mating Face (Top View) 5.08 ± 0.05 [.200 ± .002] 2.54 ± 0.05 [.100 ± .002] 10.16 ± 0.08 [.400 ± .003] 5.08 ± 0.05 [.200 ± .002] G S 0.89 ± 0.08 [.035 ± .003] (2 Holes) Dia. 2.01 ± 0.08 [.079 ± .003] (2 Holes) Dia. G Recommended PC Board Layout Center DimensionsBody /H9024 Contact Part NumbersMaterial Plating AB VALOX, White 50 Gold 8.56 21.21 5227818-1.337 .835 Metal 50 Gold 8.26 20.83 5227839-1.325 .820 Body Center Contact Dimension Part NumberMaterial Plating B VALOX, White Gold 21.21 5227820-1.835 Recommended PC Board Layout 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.200 ±.002] 10.16 ±0.08 [.400 ±.003] GS 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 Dia. [.035 ±.003] (2 Holes) 10.16 ±0.08 [.400 ±.003] 2.01 ±0.08 Dia. [.079 ±.003] (2 Holes) 1/2-28 Thread Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Right-Angle PC Board/ Mount Jacks Plating Body — Nickel Center Contact — Gold Dielectric — TEFLON Bulkhead Solder Jacks 9.65 Dia. [.380 ] +0.13 -.000 +.005 -.000 3.96 Dia. [.156 ] +0.08 -.000 +.003 -.000 Panel Thickness Refer to chart below. Recommended Panel Cutout (Jack) Part No. 5413933-1 10.93 [.430] Max. 0.89 [.035] 0.89 [.035] Max. 11.43 [.450] 4.04 Max. [.159] 9.53 [.375] 14.86 [.585] 10.97 ±0.08 [.432 ±.003] 11.56 ±0.08 Dia. [.455 ±.003] Insulation Bushing Material — Nylon Part No. 227223-1 Recommended Panel Cutout (Bushing) L Max. 13.09 Dia. [.515] Max. Accepts 1.5 Dia. Max. Wire [.059] 2.74 [.108]

2 Holes

Dia. 6.60 [.260] 5.59 [.220] 3.43 [.135] Dia. 3.30 [.130]8.26 [.325] 16.51 [.650] 3.30 [.130] 1.27 [.050]Dia. 2.79 [.110] 2.29 [.090] Dia. 6.60 [.260] 23.62 [.930] 28.98 [1.141] Recommended PC Board Cutout CenterBody Contact Dielectric Dim. Panel Part NumberPlating Plating L Thickness Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) 12.96 Dia. [.510] Max. 36.2 Max.[1.425] 40.14 Max.[1.580] 5.54 [.218 ] +0.08 -.000 +.003 -0.00 12.83 [.505 ] Dia. +0.13 -.000 +.005 -0.00 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 25.9 [1.000] 10.1 [.750] 2.0 [.080] 19.1 [.750]Sq. 1.6 [.062] Dia. Ref. 2.2 [.086] Dia. 13.5 [.531] Typ. 3.2 [.125] Dia. 4 Plcs. Panel Mount Jack Receptacles 37.0 [1.455] 15.0 [.590] 10.1 [.750] 2.0 [.080] 19.1 [.750] Sq. 7.0 [.275]Dia. 2.2 [.086] Dia. 13.5 [.531] Typ. 3.2 [.125] Dia. 4 Plcs. Flange Mount Receptacles Shell Part No. Nickel Plated 1057775-11 Brass 1Captured Center Contact Shell Part No. Nickel Plated 1057780-11 Brass 1Captured Center Contact Center BodyContact Plating Dielectric Part No. Plating Gold Nickel Polypropylene 5221325-1 Center BodyContact Plating Dielectric Part No. Plating Gold Nickel Acetal 221500-1 Jack-Jack Adapter Bulkhead Jack-Jack Adapter Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 75 Ohm Plugs, Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the con- nector. The crimp die tool- ing listed below is different from the equivalent 50 ohm connectors. Bulkhead Jack, Crimp Interchangeable Dies for RG/U Termination Center Body Dim. PRO-CRIMPER Contact Dielectric Style Hand Tool Part No.Cable Type Plating Plating L 354940-1 or PRO-CRIMPER Adapter 679304-1 179, 179A, 179B, 187, O Crimp Gold Nickel Polymethyl- Commercial 27.79 318451-2 5221506-3187A, BELDEN 9221 pentene 1.094 AT&T O Crimp Gold Nickel Polymethyl- Commercial 29.46 58174-1 5221506-5735A pentene 1.160 302 BELDEN 88241 89269 Hi-Temp 62A Hex Crimp Gold Nickel Polymethyl- Commercial 31.75 58425-1 5413591-1 Times PL62, pentene 1.250 BERK-TEK BTDC-59, BTDC-62 BELDEN 8281 O Crimp Gold Nickel Polymethyl- Commercial 32.9 58538-1 5221506-29141, 9231 pentene 1.295 H 34.29 [1.350] Max. Hex Crimp and O Crimp 12.96 Dia. [.510] Max. L Max. 5.54 [.218 ] +0.08 -.000 +.003 -.000 12.83 [.505 ] Dia. +0.13 -.000 +.005 -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout RG/U Termination Center Contact Body Dielectric Style Dim. Tooling Part No.Cable Type Plating Plating H 210, 62, 11/16 across flats, Use Hand Tool62A, 62B, 20.32 354940-159, 59A, 59B, O Crimp Gold Nickel Polymethyl- Commercial .800 with Die Set 221509-1 BELDEN 9291, 9209, pentene max. across 58536-19169, 89269 points Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TNC Connectors, 75 Ohm (Continued) Bulkhead Jack-Jack Adapter 40.14 Max.[1.580] Center BodyContact Plating Dielectric Part No. Plating Gold Nickel Polymethylpentene 414396-1 Right-Angle PC Board/ Panel Mount Jacks CL A B 34.93 [1.375] 15.88 [.625] Mtg. Hgt. Metal Body Center Dimensions Part NumbersBody /H9024 Contact AB Without WithMaterial Plating Mounting Posts Mounting Posts Metal 75 Gold 8.26 20.83 — 5413506-1.325 .820 1/2-28 Thread 5.54 [.218 ] +.008 -.000 +0.03 -0.00 12.83 [.505 ] Dia. +0.13 -.000 +0.05 -0.00 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Product Facts ■ Bayonet lock coupling for quick connect/disconnect ■ Various connectors available in 50 and 75 ohm versions ■ Fully intermateable with comparable BNC UG/U connectors ■ Full range of Hex Crimp and O Crimp Products for common coaxial cables. ■ Low VSWR ■ Single crimp connectors offer one crimping operation for fast application ■ Twist-on connectors require no special tooling for application to the cable ■ Field serviceable (Category A) connectors qualified to MIL-C-39012 ■ Field replaceable (Category C) plugs with captivated center contact ■ Field replaceable plugs can be terminated with industry standard tooling ■ Tarnish resistant Nickel finish available ■ Choice of different dielectrics ■ Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ Certified by Canadian Standards Association File No. LR 7189 Between Series Adapters For BNC Between Series Adapters, see pages 251-260. R R R The Tyco Electronics BNC RF connector family with bayonet locking coupling provides highly reliable, quick connect/disconnect coaxial connections. Exclusive single and O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. Available in both 50 and 75 ohm versions, these con- nectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board con- nectors. In addition to a variety of crimp type termi- nations, connectors are fur- nished in field replaceable and twist-on styles. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connec- tors designed to MIL-C- 39012 specifications. Tyco Electronics can also supply low cost alternatives with an extensive commer- cial type product line. A lower cost consumer series product offers the capability to supply center contacts in strip form and allow for auto- mated center contact crimp technology. All connectors are designed around the mil-specifications, but utilize low-cost materials, offering comparable mechanical and electrical performance. Product Specifications — 108-1275 — BNC Ohm Terminators 108-12020 — BNC O Crimp Connectors 108-12044 — BNC Commercial Hex Crimp 108-12047 — BNC Commercial and Hex Crimp Connectors 108-12074 — BNC Solder Jacks 108-12075 — BNC Connectors (Category A) 108-12078 — BNC Commercial PCB Panel-Mount Jacks 108-12002 — BNC Commercial T Adapter 108-12095 — BNC Commercial 75 Ohm Connectors 108-12096 — BNC Commercial Feed- Thru and Bulkhead Adapters 108-12079 — BNC Commercial 50 Ohm Solder Jacks 108-12103 — BNC Commercial PCB Press Fit Jacks Application Specifications — 114-12001 — BNC Commercial PCB Jack Press Fit Performance Specifications — Page 45 Material Specifications — Page 46 Tooling — Pages 266-268 Military Category— All MIL type O crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging — All MIL Type connectors are packaged individually, all O crimp connectors are bulk packaged and all Hex crimp connectors are individually pack- aged unless otherwise noted. Related Product Data

BNC Connectors (50 ohm/75 ohm) Performance Specifications Single Category B Straight Right-Angle Commercial Commercial Commercial PC Commercial Characteristics Crimp O Crimp Solder Solder O Crimp O Crimp Board Solder (MIL Type) (MIL Type) Clamp Clamp & Hex Crimp & Hex Crimp 50 & 75 Ohms 50 Ohm Jacks50 Ohms 75 Ohms Electrical Impedance, Nom. 50 50 50 50 50 75 50 & 75 50 & 75(Ohms) Working Voltage 500 500 500 500 500 500 500 500(Volts RMS) Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 5000 (Megohms) Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500 1500Voltage (VAC) Corona Level at 70,000 ft. 375 375 375 375 375 375 — 375(Volts, RMS) RF Leakage, Max. — -55 at -55 at -55 at -55 at -55 at ——(dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz Frequency Range 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-4(GHz) 0-2 Mechanical Durability (Cycles) 500 500 500 500 500 500 500 500 Jam Nut Mounting Torque, 25 25 25 — 25 25 25 3/124 25 Environmental Temperature Range, -65 to +85 -65 to +1651 -65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165Operating (C°) -55 to +85 2 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202Thermal Shock Method 1003Method 107 Method 107 Method 107 Method 107 Cond. A Method 107 Method 107 Method 107 Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202Method 1002Resistance Method 106 Method 106 Method 106 Method 106 Type II Method 106 Method 106 Method 106 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101 Product 108-12002 108-12020 — — 108-12044 108-12095 108-12078 108-12079Specification 108-12047 1Assembled to cable with polytetrafluorethylene dielectric. 2Assembled to cable with polyethylene dielectric. 3For Metal Threads 4For Polyester Threads Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued) Single Category Straight Right-Angle Commercial Commercial Commercial CommercialConnector Crimp B & C Solder Solder O Crimp PCB PCB SolderComponent (MIL Type) O Crimp Clamp Clamp Hex Crimp & Solder Press Fit Ohm Jacks Adapters (MIL Type) Terminators Connector Material Collar Brass Brass Brass Brass Brass QQ-B-626 —— — Brass QQ-B-626 QQ-B-626 Zinc QQ-Z-363 QQ-B-626 Brass Brass Outer Contact QQ-B-626 Phos. Bronze Brass Brass Brass —— — QQ-B-626 (Plug) Beryl. Copper QQ-B-750 MIL-C-21768 Beryl. Copper QQ-C-530 QQ-C-530 Zinc Shell Brass Brass Brass — Zinc Zinc Zinc QQ-Z-363 Brass (Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 Brass QQ-B-626 QQ-B-626 TEFLON Polyethylene TEFLON TEFLON Dielectric MIL-P-19468 TEFLON TEFLON TEFLON Polypropylene Polymethylpentene TEFLON MIL-P-19468 MIL-P-19468 Polypropylene MIL-P-19468 Polymethylpentene Gen. Purpose 1 MIL-P-19468 Polyester PBT Polypropylene, Gen. Purpose Gen. Purpose MIL-P-24519 Gen. Purpose Brass Center Contact Brass Brass Brass Brass Brass —— — QQ-B-626 (Plug) QQ-B-626 QQ-B-626 QQ-B-626 Beryl. Copper QQ-C-530 Beryl. Copper Beryl. Copper Phos. Bronze Phos. Bronze (Jack) QQ-C-530 QQ-C-530 QQ-C-530 QQ-B-750 QQ-C-530 Beryl. Copper Beryl. Copper QQ-C-530 QQ-C-530 Gasket Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber —— — Silicon Rubber QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765 Ferrule Copper Copper —— Copper —— ——QQ-C-576 QQ-C-576 QQ-C-576 Connector Primary Finishes2 Silver Silver Silver Collar QQ-S-365 QQ-S-365 Silver/ Silver/ Bright Nickel —— — QQ-S-365 Bright Nickel Bright Nickel Bright Nickel Bright Nickel QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Silver Bright or Silver Outer Contacts QQ-S-365 QQ-S-365 Silver/ Silver/ Matte Nickel Bright Nickel Bright Nickel Bright Nickel QQ-S-365 (Plug & Jack) Gold Bright Nickel Bright Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 Tin Lead Tin Lead Tin Lead Silver Center Contacts MIL-G-45204 Gold Gold Gold ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365 (Plug & Jack) Silver MIL-G-45204 Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204 Silver Ferrule3 QQ-S-365 QQ-S-365 —— Tin Lead —— ——Tin Lead ASTM-B-545 ASTM-B-545 1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519. 2If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3Ferrules with tin-lead finish are used with nickel plated outer contacts. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm L Max. 14.53 [.572] Dia. Max. Plugs, Crimp L Max. Single Crimp 14.53 [.572] Dia. Max. Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.Cable Type Plating Dielectric Style L with or Tool 69710-1 Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 178, 178A, 33.33178B, Single Crimp Silver TEFLON MIL Type 69245-4 — 69471 - 5330876-0 196, 196A 1.312 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-3 — 2-5221128-11.320 O Crimp Nickel Polyethylene Commercial 27.69 220009-5 318450-2 220217-3 1-5227079-6174, 1.090188, 188A, O Crimp Nickel TEFLON MIL Type 30.18 — 1424050-1 220026-1 5225395-7316 1.188 Single Crimp Silver TEFLON MIL Type 33.33 69245-2 — 69422 - 2-5330061-11.312 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-3 — 2-5221128-3 179, 179A, 1.320 179B, 161, O Crimp Nickel Polyethylene Commercial 27.69 — 1424050-1 220217-3 2-5227079-2 187, 187A, 1.090 BELDEN O Crimp Nickel TEFLON MIL Type -30.18 —— 220026-1 5225395-89221 1.188 Single Crimp Silver TEFLON MIL Type 33.33 — 91910-1 69408 - 2-5329446-11.312 RD 316, 188, O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 — 8-5227079-2Double Braid 1.090 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 2-5221128-7BELDEN 1.320 8219 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 6-5227079-73 1.090 BELDEN 9907, 89907 COMM/ O Crimp Nickel Polyethylene Commercial 27.69 220187-1 318452-2 220217-1 6-5227079-84 SCOPE 2104 1.090 O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 58376-1 1-5227079-9BELDEN 1.090 8218 O Crimp Nickel TEFLON MIL Type 30.18 — 91904-1 69669-2 1-5225395-01.188 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3For use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only. 4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only. Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) L Max. 14.53 [.572] Dia. Max. L Max. Single Crimp 14.53 [.572] Dia. Max. Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.Cable Type Plating Dielectric Style L with or Tool 69710-1 Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 5221128-13 1.320 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 5227079-558, 58A, 1.090 58B, 58C O Crimp Nickel TEFLON MIL Type 33.74 269478-1 220189-3 69727 - 5225395-11.328 Single Crimp Silver TEFLON MIL Type 33.33 2— 91904-4 69223-1 2-5329444-11.312 BELDEN Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-0 88240, 1.320 BERK-TEK O Crimp Nickel Polyethylene Commercial 33.33 220187-1 58435-1 1 220217-1 4-5227079-3BTDC-58, 1.312 COMM/ O Crimp Nickel TEFLON MIL Type 33.33 269478-1 220189-3 69727 - 4-5225395-2SCOPE 2135 1.312 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 5227079-6 223, 1.280 55, 55A, O Crimp Nickel TEFLON MIL Type 43.64 269478-1 220189-3 69727 - 5225395-3 55B 1.718 Single Crimp Silver TEFLON MIL Type 33.33 — 91904-3 69424 - 2-5329444-21.312 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 6-5227079-11.090 142, 142A, O Crimp Nickel TEFLON MIL Type 30.18 269478-1 220189-3 69727 - 5225395-6142B, 400 1.188 Single Crimp Silver TEFLON MIL Type 33.33 269331-1 — 69429-1 2-5330358-21.312 Consult Tyco Electronics for recommended crimp tooling. 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3Bulk packaged. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.Cable Type Plating Dielectric Style L with or Tool 69710-1 Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-11.320 O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-1 1 220217-2 5227079-7124, 140, 210, 1.090 62, 62A, 62B, O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-1 1 220217-2 1-5227079-159, 59A, 59B, 1.090BELDEN 9291, O Crimp Nickel TEFLON MIL Type 30.18 — 58537-1 — 5225395-29209, 9269 1.188 Single Crimp Silver TEFLON MIL Type 33.33 69141-1 — — 2-5329445-11.312 302, BELDEN 88241, 89269, Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-1 Hi-Temp 62A, 1.320 Times PL62, BERK-TEK, BTDC-59, O Crimp Nickel TEFLON MIL Type 34.14 69477-1 58537-1 69669-1 4-5225395-1 BTDC-62 1.344 Hi-Temp 59, Times PL59, O Crimp Nickel Polyethylene Commercial 33.33 — 58537-1 — 5-5227079-3 PLF59 (20 AWG C.C.) 1.312 BELDEN 9104, 9240, Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-7 9112, 9167, 1.320 9259, 9266, Times O Crimp Nickel TEFLON MIL Type 30.94 — 258537-1 69669-1 2-5225395-0 FM-59 1.218 BELDEN 8281, 9141, 9231, Single Crimp Silver Polypropylene MIL Type 41.50 69652- — 220000-1 5330878Western Electric 1.634 724, 728, 3049 8, 8A, O Crimp Silver TEFLON MIL Type 27.31 220015-1 — — 5225886-1213 1.075 11, 11A O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 5225886-41.875 BELDEN 9914, O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 5225886-7Times FM-8 1.875 Alpha 9847, O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 225886-5/H12135BELDEN 8213, 9292 1.875 9, 9A, 9B, O Crimp Silver TEFLON MIL Type 52.38 220015-1 — — 5225886-1214 2.062 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1 L Max. 14.53 [.572] Dia. Max. L Max. Single Crimp 14.53 [.572] Dia. Max. Hex and O Crimp Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Plugs, Crimp L Max. 14.53 [.572] Dia. Max. 26.57 [1.046] L Max. 14.53 [.572] Dia. Max. 26.57 [1.046] Single Crimp Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 174, 188, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-3 188A, 316 pentene 1.553 Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91910-1 69422 - 5331178-01.750 179, 179A, 39.45179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial 1.553 — 58436-3 — 5413959-4187, 187A, pentene BELDEN 9221 180, 180A, 180B, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-5195, 195A pentene 1.553 BELDEN 9907, 89907, 8219, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-6COMM/SCOPE pentene 1.553 2104, 3104 Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-1pentene 1.553 58, 58A, O Crimp Gold Nickel TEFLON MIL Type 37.29 69478-1 220189-3 69727-1 5225974-158B, 58C 1.468 Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91904-1 69223-1 5331175-01.750 O Crimp Gold Nickel TEFLON MIL Type 37.29 69478-1 220189-3 69727-1 5225974-255, 55A, 1.468 55B, 223 Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91904-3 69429-1 5331182-01.750 142, 142A, Single Crimp Gold Silver TEFLON MIL Type 44.45 69331-1 — 69429-1 5331182-0142B, 400 1.750 124, 140, 210, 62, 62A, 62B, 37.2959, 59A, 59B, O Crimp Gold Nickel TEFLON MIL Type 1.468 — 58537-1 69669-1 5225974-5 BELDEN 9291, 9209, 9269 38.10 [1.500]14.53 [.572] Dia. Max. Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs are not recommended for applications where the cable frequently moves or flexes. Mating Twist-On Jack— Page 52 RG/U Contact Body Dielectric Style Part No.Cable Plating Plating 59, 59A, Gold Nickel Polymethyl- Commercial 5414265-359B pentene Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm (Continued) L Max. 11.1 [.437] Dia. Max. 11.08 [.436] Dia. Max. L Max. Single Crimp Hex and O CrimpJacks, Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Gold Nickel Polymethyl- Commercial 33.02 — 58436-3 — 5413779-3pentene 1.300 O Crimp Gold Nickel Polypro- Commercial 30.48 — 1424050-1 220217-3 5228979-7174, 188, pylene 1.200 188A, 316 O Crimp Gold Nickel TEFLON MIL Type -30.48 — 1424050-1 220026-1 5225396-71.200 Single Crimp Gold Silver TEFLON MIL Type 33.33 —— 69422- 2-5330062-11.312 179, 179A, 179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial -33.02 — 58436-3 — 2-5413779-4187, 187A, pentene 1.300 BELDEN 9221 O Crimp Gold Nickel Polypro- Commercial 30.48 220187-1 58435-1 1 220217-1 5228979-558, 58A, pylene 1.200 58B, 58C O Crimp Gold Nickel TEFLON MIL Type 30.48 2— 91901-1 69727 - 5225396-111.200 223, 55, Single Crimp Gold Silver TEFLON MIL Type 33.33 69140-2 91904-3 69424 - 2-5329452-255A, 55B 1.312 124, 140, 210, O Crimp Gold Nickel Polypro- Commercial 30.48 220187-2 58435-1 1 220217-2 5228979-662, 62A, 62B, pylene 1.20059, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel TEFLON MIL Type 30.48 — 58537-1 269669-1 5225396-29209, 9269 1.200 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes. Mating Twist-On Plug— Page 50 RG/U Center Body Dielectric Style Part No.Cable Contact Plating 59, 59A, 59B Gold Nickel Acetal Commercial 222428-1 40.14 [1.580] Max. Panel Jacks, Crimp 28.96 [1.140] Max. 2.77 [.109] 12.7 ±0.1 [.500 ±.004] 12.7 ±0.1 [.500 ±.004] Recommended Panel Cutout Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 174, 188, 188A, 316 O Crimp Gold Nickel TEFLON MIL Type — 1424050-1 220026-1 5225397-7 58, 58A, 58B, 58C O Crimp Gold Nickel TEFLON MIL Type -69478-1 91901-1 69727 - 5225397-1 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel TEFLON MIL Type -69477-1 258537-1 269669-1 5225397-2 9209, 9269, 89269 Dia. 11.2 [.441] Dia. 17.84 [.702] Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp Note: Panel Insulating Bushings — Page 54 H L Max. H L Max. 11.04 [.435] Min. 12.82 [.505] Dia. Min. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Recommended Panel Cutouts Maximum Panel Thickness 3.18 [.125] Single Crimp Hex and O Crimp H = 11/16" across flats, 20.32 [.800] Max. across points Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 — 58436-3 — 5413771-3pentene 1.450 O Crimp Gold Nickel Polypro- Commercial 34.93 —— 220217-3 5228980-7174, 188, pylene 1.375 188A, 316 O Crimp Gold Nickel TEFLON MIL Type 35.71 —— 220026-1 5225398-71.406 Single Crimp Gold Silver TEFLON MIL Type 32.13 —— 69422- 2-5330063-11.265 179, 179A, O Crimp Gold Nickel TEFLON MIL Type 35.71 — 1424050-1 220026-1 5225398-8179B, 161, 1.406 187, 187A, Single Crimp Gold Silver TEFLON MIL Type 32.13 — 91910-1 69408 - 2-5329458-1BELDEN 9221 1.265 Times RD316 O Crimp Gold Nickel TEFLON MIL Type 35.71 — 91904-1 69669-2 1-5225398-51.406 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Panel Insulating Bushings for Bulkhead Jacks Material — Nylon Note: Can not be used with single crimp bulkhead jacks. Part No. 330620 (2 Required) 14.73±0.13 [.580±.005] Dia. 14.1±0.08 [.555±.003] 13.95 [.549] Dia. 14.58 [.574] 5.46 [.215] 0.89 [.035] 0.81 [.032] 12.93 [.509] Dia. 17.45 [.687] Dia. Recommended Panel Cutout Dia. BNC Connectors, 50 Ohm (Continued) H L Max. Bulkhead Jacks, Crimp (Continued) Note: Panel Insulating Bushings — at the bottom of this page Single Crimp Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 58, 58A, 58B, 58C, BELDEN 88240, Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 — 58436-1 — 5413771-1BERK-TEK pentene 1.450 BTDC-58, COMM/SCOPE 2135 O Crimp Gold Nickel Polypro- Commercial 34.93 220187-1 58435-1 1 220217-1 5228980-5pylene 1.375 58, 58A, O Crimp Gold Nickel TEFLON MIL Type 41.28 — 91901-1 69727 - 5225398-158B, 58C 1.625 Single Crimp Gold Silver TEFLON MIL Type 32.13 — 91904-4 69223-1 2-5329456-11.265 223, O Crimp Gold Nickel TEFLON MIL Type 35.71 — 91901-1 69727 - 5225398-355, 55A, 55B 1.406 142, 142A, O Crimp Gold Nickel TEFLON MIL Type 35.71 — 91901-1 69727 - 5225398-6142B, 400 1.406 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polypro- Commercial 34.93 220187-2 58435-1 1 220217-2 5228980-6 BELDEN 9291, pylene 1.375 9209, 9269 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. H L Max. 11.04 [.435] Min. 12.82 [.505] Dia. Min. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Recommended Panel Cutouts Maximum Panel Thickness 3.18 [.125] H = 11/16" across flats, 20.32 [.800] Max. across points Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm (Continued) W Dia. Max. L Max. 3/8" - 32 Thread Accepts 1.5 [.059] Dia. Max. Wire Bulkhead Solder Jacks, Front Mount Body Plating — Nickel Without Solder Terminal W Dia. Max. L Max. 3/8" - 32 Thread Accepts 1.5 [.059] Dia. Max. Wire 22.23 [.875] With Solder Terminal Recommended Panel Cutout .396/4.04 [.156/.159] 9.65/9.75 [.380/.384] Dia. Dimensions Panel Insulating Part No.Contact Dielectric LW Thickness Bushing Without Solder With SolderMaterial Terminal* Terminal 33.33 13.09 1.17-6.35 227223-1 or — 5227169-7 VALOX 1.312 .515 .046-.250 221951-1 26.93 13.09 1.17-3.18 227223-1 or 5227754-2 5227755-2 Gold 1.060 .515 .046-.125 221951-1 33.33 13.09 1.17-6.35 227223-1 or 5227169-4 5227169-8 TEFLON 1.312 .515 .046-.250 221951-1 33.33 13.09 1.17-6.35 227223-1 or — 5227169-5 Tin VALOX 1.312 .515 .046-.250 221951-1 Includes lockwasher and jam nut. **Includes solder terminal and jam nut. Plugs, for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold 14.53 [.572] Dia. Max. L Max. Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lo r PRO-CRIMPER Adapter 679304-1 3D-2V Hex Crimp Polyethylene 33.53 58436-1 3-5221128-11.320 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company.

1.78 [.070] 0.81 [.032] 12.7 [.500] Dia. 3.94 [.155] 11.94 [.470] 11.43 [.450] 9.53 [.375] Part No. 221951-1Part No. 227223-1 12.83 ±0.08 [.505 ±.003] Dia. 12.07±0.08 [.475 ±.003] 11.56 ±0.08 [.455 ±.003] Dia. 10.97 ±0.06 [.432 ±.003] 0.94 [.030] Max. Dia. 15.88 [.625] Dia. 9.53 [.375] Dia. 10.93 [.430] Dia. 4.04 [.159] Max.1.09 [.043] Max. 14.86 [.585] Dia. Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) 12.83 [.505] Max. 3/8" - 24 Thread 26.80 [1.055] Max. Isolated Bulkhead Solder Jacks, Front Mount Plating Body — Nickel Dielectric — White VALOX Panel Thickness 1.17-6.35 [.046-.250] Recommended Panel Cutout 31.75 [1.250] 13.09 Dia. [.515] Max. 3/8" - 24 Thread Accepts 1.5 [.059] DIa. Max. Wire Panel Thickness 1.17-3.18 [.046-.125] Recommended Panel CutoutPart No. 5414194-1 Plating Body — Nickel Center Contact — Silver Dielectric — Black VALOX Flange & Thread Material — Black VALOX Center Flange & PartContact Thread No.Plating Material TinV ALOX 5227726-1 Silver VALOX 5227726-2 Gold VALOX 5227726-3 Max. 9.91 [.390 ] +0.13 -0.20 +.005 -.000 Dia. 3.89 [.153 ] +0.08 -0.00 +.003 -.000 9.60 [.378 ] +0.08 -0.00 +.003 -.000 Dia. 3.94 [.155 ] +0.08 -0.00 +.003 -.000 Sealed Bulkhead Solder Jack, Rear Mount Part No. 5227426-1 17.78 Dia. [.700] Max. 31.75 [1.250] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 1/2" - 28 Thread Rubber Gasket Accepts . 1.5 [.059] DIa. Max. Wire 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Max. Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene This connector is designed to prevent moisture from entering the interface from the rear of the connector. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) CLCL Recommended PC Board Layouts Without Mounting Posts With Mounting Posts (Top View) Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 ±0.05 [.200 ±.002] 2.01 ±0.05 [.079 ±.002] (2 Holes) Mating Face Right-Angle Jacks PC Board/Panel Mount Body — Nickel Dielectric — Polymethylpentene A B 34.93 [1.375] C Mtg. Hgt. 1/2-28 Thread 1/2-28 Thread VALOX Body A B 34.93 [1.375] Metal Body C Mtg. Hgt. (Top View) 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 5.08 ±0.05 [.200 ±.002] Mating Face Body Center Dimensions Part No. Contact Without With L With LMaterial Plating ABC Mounting Posts Mounting Posts Compliant Posts Gold1 8.26 20.83 15.88 5227676-1 5227677-1 3.48 —— Metal .325 .820 .625 .137 Housing .272 .835 .519 .110 Plating: Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Mounting Post Style Compliant Post L E 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.08 -0.00 +.003 -.000 L Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Jacks PC Board/Panel Mount Plating Body — Nickel Dielectric — Polymethylpentene 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.200 ±.002] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] GS 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] 2.01 ±0.08 [.079 ±.003] (2 Holes) GS (Top View) (Top View) L B 1/2-28 Thread 34.93 [1.375] Mtg. Hgt. 15.88 [.625] L B 1/2-28 Thread 34.93 [1.375] Mtg. Hgt. 15.88 [.625] * Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2. Screw for thickness of less than 2.38 [.093] Part No. 221108-4. Without Mounting Posts With Mounting Posts 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] VALOX Body Metal Body Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 Part No. Body Center Dim. Dim. Without WithMaterial Contact BL Mounting MountingPlating Posts Posts Tin 21.21 3.48 5226993-1 5227222-1VALOX, .835 .137 White Gold 21.21 3.48 5226993-3 5227222-3.835 .137 Tin 21.21 3.48 5226993-2 5227222-2VALOX, .835 .137 Black Gold 21.21 3.48 5226993-6 5227222-6.835 .137 Tin 20.83 3.48 — 5227671-1 Metal .820 .137 Gold 20.83 3.48 — 5227673-1.820 .137 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Recommended PC Board Layouts Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.08 -0.00 +.003 -.000 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) CL 8.59 [.338] 34.93 [1.375] 21.21 [.835] 15.88 [.625] Mounting Height 1/2-28 Thread Jacks with Mounting Flanges PC Board/Panel Mount (Top View) 2.54 [.100]SG 11.43 [.450] 22.86 ±0.08 [.900 ±.003] 0.89 ±0.08 [.035 ±.003] 8.89 [.350] 3.3 [.130] Dia. Clearance Hole for 5-40 Screw Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 Mating Face Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Body Center Contact Part No.Material Plating VALOX, Tin 5226978-1 White Gold 5226978-3 Recommended PC Board Layout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.08 -0.00 +.003 -.000 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks PC Board Mount 17.45 [.687] 15.88 [.625] Drill Holes for Dia. Pin (5 Places) 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 3.73 [.147] 4.32 [.170] 1.07 ±0.05 [.042 ±.002] Dia. 1.73 ±0.05 [.255] 7.47 [.294] Style D Style A Style C 6.88 ±0.05 [.271 ±.003] 3.43 ±0.05 [.135 ±.002] 6.88 ±0.05 [.271 ±.003] 1.32 ±0.08 [.052 ±.003] Dia. 2.44 ±0.08 [.096 ±.003] (4 Holes) Dia. 15.88 [.625]16.64 [.655] Body Center Leg Plating Contact Plating Dielectric Style Length L Part No. Silver VALOX A 6.35 5227699-1.250 Gold VALOX A 6.35 5227699-2.250 TinV ALOX A 6.35 5227699-3 Nickel .250 Gold VALOX A 3.81 5414460-11 .150 Silver VALOX C 4.45 5222420-1.175 Gold VALOX E 6.35 5415189-1.250 Gold TEFLON B 3.30 5413969-2.130 Tin-Lead Silver VALOX C 3.18 5414305-1.125 Gold VALOX D 3.43 5221123-2.135 1With .76 [.030] standoffs on top of legs.Style B L L Drill Hole to Receive 0.94/H115500.06 [.037±.002] Dia. Pin,

5 Required

12.70 /H115500.08 [.500 ±.003] 12.70 /H115500.08 [.500 ±.003] 6.35 ±0.06 [.250 ±.002] Style E (Panel Mount) L 20.57 [.810] L 6.88 ±0.08 [.271 ±.003] 3.43 ±0.08 [.135 ±.003] 1.02 ±0.08 [.040 ±.003] Dia. 1.50 ±0.08 [.059 ±.003] (4 Holes) Dia. 3.44 ±0.08 [.135 ±.003] 6.88 ±0.08 [.271 ±.003] Recommended PC Board Layouts L 20.78 /H115500.38 [.818 /H11006.015] Sq. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Press Fit Vertical Metalized Jack, PC Board Mount Insulating Bushing Material — Polypropylene Part No. 222163-1 Only to be used on Part Nos. 5222006-1 & 5222462-1 Part No. 5222006-1 14.61 [.575]1.02 ±0.08 [.040 ±.003] Dia. 6.88 ±0.05 [.271 ±.002] 3.43 ±0.05 [.135 ±.002] 6.88 ±0.05 [.271 ±.002] 20.57 [.810] Max. 11.94 Dia. [.470] Max. Recommended PC Board Layout PC Board Thickness Not Less Than 0.99 [.093] Dia. 11.94 [.470] Dia. 2.96 [.115] Max. 6.61 [.260] Max. 1.5 [.059 ] Dia.

4 Holes

+0.08 -0.10 +.003 -.004 Vertical Metalized Jacks, PC Board Mount 24.00 [.945] 10.72 ± 0.25 [.422 ± .010] 10.70 ± 0.08 [.421 ± .003] 7.50 ± 0.08 [.295 ± .003] 1.00 ± 0.08 [.039 ± .003] 2 Plcs. 1.50 ± 0.08 [.059 ± .003] 2 Plcs. 3.00 ± 0.10 [.118 ± .004] 1.70 ± 0.10 [.067 ± .004] 2.50 ± 0.08 [.098 ± .003] 4 Plcs. Signal Contact Hole Switching Contact HolePart No. 1274314-1 (Switching) 24.00 [.945] 10.72 ± 0.25 [.422 ± .010] Part No. 1274315-1 Recommended PC Board Layout 10.70 ± 0.08 [.421 ± .003] 3.75 ± 0.08 [.148 ± .003] 1.00 ± 0.08 [.039 ± .003] 1.50 ± 0.08 [.059 ± .003] 2 Plcs. 3.00 ± 0.10 [.118 ± .004] 1.70 ± 0.10 [.098 ± .003] 3 Plcs. Recommended PC Board Layout Body Contact Dielectric Part Plating Plating No. Tin Silver Polyphenylene 6274314-1 Tin Silver Polyphenylene 6274315-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Recommended PC Board Layout 6.6 ± 0.08 [.260 ± .003] 6.6 ± 0.08 [.260 ± .003] 3.3 ± 0.08 [.130 ± .003] 1.17 ± 0.08 [.046 ± .003] 2.11 ± 0.08 [.083 ± .003] Dia. (4 holes) Maximum PC Board Thickness 2.54 [.100] Dia.CL 6.15 [.242] 10.97 [.432] Mounting Height 27.64 ± 0.51 [1.088 ± .020] Right-Angle Metalized Jacks, PC Board Mount Body Dielectric Center Part Plating Contact Length No. Nickel Polymethyl- 4.34 5413631-1*pentene .171 Tin TEFLON 4.34 5413631-2*.171 Nickel Polymethyl- 3.33 5413631-3*pentene .131 Body Dielectric Contact Part No. Nickel TPX Gold 5414373-1 Recommended PC Board Layouts 1.19 ±0.18 [.047 ±.007] Dia. 7.62 ±0.08 [.300 ±.003] 1.78 ±0.08 [.070 ±.003] Dia. 7.62 ±0.08 [.300 ±.003] 3.81 ±0.08 [.150 ±.003] 8.64 [.340] 21.85 [.860] 25.40 [1 .000] Right-Angle Metalized Jacks, PC Board/Panel Mount Body Part Plating Dielectric No. Tin TEFLON 5415025-2 Tin TPX 5415025-1 Lockwasher and Jam Nut see page 59. 6.6 ± 0.08 [.260 ± .003] 6.6 ± 0.08 [.260 ± .003] 3.3 ± 0.08 [.130 ± .003] 1.17 ± 0.08 [.046 ± .003] 2.11 ± 0.08 [.083 ± .003] 4 holes Dia. Dia. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.64 [.222 ] +0.08 -0.00 +.003 -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 1/2-28 Thread 27.64 ± 0.51 [1.088 ±.020] 10.97 ± 0.18 [.432 ±.007] 6.15 ± 0.25 [.242 ±.010] 11.66 [.459] 4.34 [.171] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Tee Adapter Covers Material — Polypropylene, general purpose F 5.08 [.200]15.11 [.595] 114.55 ±0 .76 [4.510 ± .030] Color Black Ivory Part No. 221586-1 221586-3 D E Tee Adapters Style A (Jack-Plug-Jack) Style B With Insulated Cover (Jack-Plug-Jack) Insulation Material Polyphenylene oxide Style C (Jack-Jack-Jack) E D F E D Body Center Contact Dimensions Comparable Packaging Style Material Material Dielectric UG/U No. Part No. and Plating and Plating DE F Connector Per Pkg. Brass, BE CU, Gold 32.54 26.19 14.27 Bulk Nickel (30) 2 TEFLON 1.281 1.031 .562 274A (100) 221543-2 PH BR, Gold 33.02 27.31 14.50 Bulk (15)2 Acetal 1.300 1.075 .571 — (100) 5413592-2 A BE CU, Gold 33.02 27.31 14.50 Bulk Zinc, (30)2 Acetal 1.300 1.075 .571 — (100) 5413592-6 Nickel PH BR, Gold 33.02 27.31 14.50 Individual (15)2 Acetal 1.300 1.075 .571 — (1) 3 5413592-9 BE CU, Silver 33.02 27.31 14.50 Individual (200)2 Acetal 1.300 1.075 .571 — (1) 1-5413592-1 B Zinc, BE CU, Gold Acetal 32.54 31.12 17.15 1 Bulk Nickel (30) 2 1.281 1.225 .675 — (100) 5413366-21 Brass, BE CU, Silver 32.54 23.37 Bulk C Nickel (200) 2 TEFLON 1.281 .920 —— (100) 221988-1 Zinc, PH BR, Gold 32.54 23.62 Bulk Nickel (50) 2 Acetal 1.281 .930 —— (100) 5414311-1 1Gray insulation cover 2(Microinches min thickness) 3(Special graphics) Dia. Dia. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) 35.81 [1.410] 32.54 [1.281] Right-Angle Adapters (Jack-Plug) 26.97 [1.062] Bulkhead Jack-Jack Adapters L Max. H Max. Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. 36.07 [1.420]15.87 [.625] 22.89 [.901] Max.

14.53 Dia

[.572] Max. Isolated Bulkhead Jack-Jack Adapter Body Center Contact Dielectric Part No.Plating Plating Nickel Gold Polymethylpentene 5414105-1 Body Center DimensionsContact Dielectric Part No.Plating Plating HL Nickel Silver 17.45 38.10 TEFLON 330024-.687 1.500 Nickel Gold1 17.78 36.07 Poly- 5228226-1.700 1.420 ethylene Nickel Gold2 17.78 36.07 Poly- 5228226-3.700 1.420 ethylene Plating: Gold1 — 0.00127 [.000050] thick Gold2 — 0.00076 [.000015] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Body Center Contact Dielectric Part No.Plating Plating Nickel Silver TEFLON 5329517-1 Nickel Gold TEFLON 5222165-2 Nickel Gold Polymethylpentene 5414666-1 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.06 -0.00 +.003 -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.06 -0.00 +.003 -.000 Jack-Jack Adapters Style A Body Center Contact Dielectric Style Part No.Plating Plating Nickel Silver TEFLON A 221551-1 Nickel Gold TEFLON A 221551-3 Nickel Gold Polymethyl- B 5414414-1pentene Style B Plug-Plug Adapter 31.8 [1.252] Ref. Contact Body Part No.Plating Plating Gold Nickel 415796-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jack Covers 101.6 [4.000] #6 Stud Size 22.10 [.870] 14.53 Dia. [.572] Max. Body Plating Part No. Silver 330022 Nickel 1-330022-2 Max. 14.53 Dia. [.572] Max. 33.02 [1.300] #6 Stud Size Tether Terminator Plugs 50, 75, 93 Ohm Plating Body — Nickel Center Contact — Gold Dielectric — Polyethylene Insulated Terminators Insulation Material Polyphenylene oxide Long Cover Short Cover* 38.10 [1.500] 17.40 [.685] 17.40 [.685] Register Color Cover Part Specification Style No. Gray Long 5413557-1

1 Watt, 50 Ohm Short 5413364-2

• The Short Cover is required when mating the Terminator with a Tee Adapter. Resistor Part No. Specification With Tether Without Tether

1 Watt, 50 Ohm 5221629-11 5221629-4

1 Watt, 75 Ohm 5221629-21 5221629-5

1 Watt, 93 Ohm — 5221629-6

0.5 Watt, 75 Ohm — —

1 Watt, 50 Ohm 1-5221629-61 —

1 Tether is conductive with #4 stud size

Max. 38.10 [1.500] Max. Shorting Caps Plating Body — Nickel Center Contact — Gold Part No. 413453-1 15.24 [.600] 14.53 [.572] Dia. Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm Plugs, Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling listed below is different from the equivalent 50 ohm connectors. Plugs Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-8179B, 187, 1.160 187A, 161, O Crimp Gold Nickel Polyethelene Commercial 35.56 318451-2 — 5221185-8BELDEN 9221 1.140 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 1-5413589-0 AT&T 735A 1.160 O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 1-5221185-81.090 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-3 BELDEN 8218 1.160 O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 5221185-31.090 140, 210, 62, 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-262B, 59, 59A, 59B, 1.160 BELDEN 9291, O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 58248-2 5221185-29209, 9269 1.090 302, BELDEN 89269, 88241, Hi-Temp 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-1Times PL-62, Berk Tek 1.160 BTDC-59, BTDC-62 BELDEN 8212, 9104, 29.46 9112, 9167, 9240, 9259, Hex Crimp Gold Nickel Polyethelene Commercial 1.160 58425-1 — 5413589-9 9266, Times FM-59, (RG 59 Type 27.69 with 20 AWG C.C.) O Crimp Gold Nickel Polyethelene Commercial 1.090 58536-1 58248-2 5221185-9 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-7BELDEN 9145, 1.160 AT&T 734A O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 — 1-5221185-01.090 BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 25.65 58536-1 — 5221185-19114 1.010 6, 6A O Crimp Gold Nickel Polyethelene Commercial 37.85 58538-1 58248-1 5221185-71.490 BELDEN 8281, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-3 — 5413589-59141, 9231, 1.160Western Electric 724, O Crimp Gold Nickel Polyethelene Commercial 28.45 58538-1 58248-1 5221185-5728, 3049 1.120 COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 2-5221185-9S59 Hec 1.140 COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 3-5221185-1F59 Hec-z 1.140 L Max. 14.53 [.572] Dia. Max. Hex and O Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Plugs for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold Bulkhead Jacks for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene 14.53 [.572] Dia. Max. L Max. Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lo r PRO-CRIMPER Adapter 679304-1 3C-2V Hex Crimp Polymethylpentene 29.46 58425-1 1-5413589-11.160 2.5C-2V Hex Crimp Polymethylpentene 29.46 58425-2 1-5413589-61.160 Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lo r PRO-CRIMPER Adapter 679304-1 1.5C-2V Hex Crimp 75 Ω 36.83 58425-2 5413590-4*1.450 *Packaged in 100 pieces per bag. 20.32 [.800] Max. L Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 14.53 Dia. [.572] Max. L Max. 27.18 [1.070] Hex and O Crimp Max. Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, 179B, 187, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — -5413588-8187A, 161 pentene 1.553 BELDEN 9221 AT&T 735A Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 1-5413588-0pentene 1.553 AT&T KS 19224 L2, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 5413588-4RD179 pentene 1.553 Double Braid 140, 210, 62, Hex Crimp Gold Nickel Polymethyl- Commercial 139.45 58425-1 — 5413588-262A, 62B, 59, pentene 1.553 59A, 59B, BELDEN 9291, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 58248-2 -5221402-29209, 9269 pentene 1.570 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-1 — 5413588-9Times FM-59, pentene 1.553 (RG 59 Type with 20 AWG C.C.) BELDEN 9145, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 — 5221402-4AT&T 734A pentene 1.570 Right-Angle Plugs, Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-8179B, 161, 1.300 187, 187A, O Crimp Gold Nickel Polyethelene Commercial 30.48 318451-2 — 5221199-5BELDEN 9221 1.200 BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-31.300 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 58248-2 5221199-2 BELDEN 9291, 1.200 9209, 9269 302, BELDEN 88241, 89269, Hi-Temp 62A, Times Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-1PL-62, Berk 1.300 Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-9Times FM-59, 1.300 (RG 59 Type with 20 AWG C.C.) BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 — 5221199-19114 1.200 Jacks, Crimp L Max. Hex and O Crimp 11.08 Dia. [.436] Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 20.32 [.800] Max. 34.93 [1.375] Hex and O Crimp Max. 12.83 [.505 ] +0.13 -0.20 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-8179B, 161, 1.450 187, 187A, O Crimp Gold Nickel Polyethelene Commercial 34.93 318451-2 — 5221221-5BELDEN 9221 1.375 AT&T KS 19224 L2, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-4RD179 1.450 Double Braid Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-3BELDEN 8218 1.450 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-2 BELDEN 9291, 1.375 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-7Times FM-59 1.375 (RG 59 Type with 20 AWG C.C.) BELDEN 9114, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 — 5221221-19248 1.375 Bulkhead Jacks, Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Solder Jacks Front Mount Plating Body — Nickel Center Contact — Silver 27.43 [1 .083] 13.09 Dia. [.515] Max. Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout 9.75/9.65 [.384./380] Dia. 4.04/3.96 [.159/.156] Part No. 5221244-1 (with Solder Terminal) Bulkhead Solder Jack Rear Mount Lockwasher and Jam Nut see page 73. Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Bulkhead Jack PC Board Mount Accepts .054 Dia. Max. Wire Part No. 5415187-1 (without Solder Terminal) 3/8-32 Thread Part No. 5414217-1 17.78 Dia. [.700] Max. 31.75 [1 .250] 1/2-28 Thread Accepts . .050 Dia. Max. WIre Max. Max. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 13.09 [.515] Dia. Max. 27.43 [1.083] Max. Accepts .054 Dia. Max. Wire 3/8-32 Thread 20.8 [.820] 11.07 [.436] Max. 3.30 [.130] Ø 12.70 ± 0.1 [.500 ± .004] 11.2 ± 0.1 [.441 ± .004] Part No. 6274086-1 Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Body Center Dimensions Part No. Contact Without WithMaterial Plating ABCL Mounting Posts Mounting Posts VALOX, Black w/ 6.17 21.21 11.68 2.79 * Compliant Posts Gold3 .243 .835 .460 .110 — 5415105-2 (Economy)* VALOX, 6.17 21.21 11.68 4.01 * Black Gold3 .243 .835 .460 .158 — 5415105-1 (Economy)* VALOX, 6.91 21.21 13.88 3.48 * White Gold1 .272 .835 .519 .137 — 5415634-2 (Economy)* **Economy connector uses 50 Ω part with smaller dielectric and stamped and formed con- tact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). Plating: Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. CLCL Recommended PC Board Layouts Right-Angle Jacks PC Board/Panel Mount Outer Shell — Nickel Dielectric — Polymethylpentene Lockwasher and Jam Nut see page 73. A B 34.93 [1.375] C Mtg. Hgt. 1/2-28 Threads 1/2-28 Threads VALOX Body A B 34.93 [1.375] Metal Body C Mtg. Hgt. L * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. Without Mounting Posts With Mounting Posts (Top View) 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 ±0.05 [.200 ±.002] 2.01 ±0.08 [.079 ±.003] (2 Holes) Mating Face (Top View) 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 5.08 ±0.05 [.200 ±.002] Mating Face 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Jacks PC Board/Panel Mount Plating Outer Shell — Nickel Dielectric — Polymethylpentene VALOX Body Metal Body Recommended PC Board Layout L B 34.93 [1.375] Mtg. Hgt. 15.88 [.625] 1/2-28 Thread L B 34.93 [1.375] Mtg. Hgt. 15.88 [.625] 1/2-28 Thread Body Contact Dim. Dim. Part No.Material Plating B L VALOX, Black Gold1 21.21 3.48 5415632-1 (Economy)* .835 .137 VALOX, White Gold1 21.21 3.48 5415632-2 (Economy)* .835 .137 Metal Gold1 20.83 3.48 5222132-1.820 .137 Metal Tin 21.21 3.48 5415520-1(Economy)* .835 .137 *Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). Plating: Gold1 — 0.00076 [.000030] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] 2.01 ±0.08 [.079 ±.003] (2 Holes) GS (Top View) 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Plating Dielectric — TEFLON A Max. 11.49 [.470] Dia. Max. Recommended PC Board Layout Style A Style B Style C Body Center Leg Contact Style Length Part No.Plating Plating L Nickel Gold B 3.30 6274291-2.130 Tin Gold B 3.30 6274291-1.130 Tin Gold B 6.35 6274359-1.250 Tin Gold C 4.44 5414394-1.175 Nickel Silver A 6.35 5413986-1.250 Tin Gold F 2.54 6274360-1.100 6.88 ±0.05 [.271 ±.002] 6.88 ±0.1 [.271 +.003] –.004 1.5 ±0.1 [.059 +.004] –.0033.43 ±0.05 [.135 ±.002] Recommended PC Board Layout 17.45 [.687] 15.88 [.625] L L Press Fit Vertical Metalized Jacks PC Board Mount Dim. Part A No. 20.57 5222462-1.810 16.26 5414088-1.640 20.57 [.810] L Drill Holes for Dia. Pin (5 Places) 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 6.88 ±0.05 [.271 ±.003] 6.88 ±0.08 [.271 ±.003] 3.43 ±0.05 [.135 ±.002] 3.44 ±0.08 [.135 ±.003] 3.43 ±0.08 [.135 ±.003] 6.88 ±0.05 [.271 ±.003] 6.88 ±0.08 [.271 ±.003] 2.44 ±0.08 [.096 ±.003] (4 Holes) Dia. 1.32 ±0.08 [.052 ±.003] Dia. (4 Plated-Thru Holes) Dia. 1.02 ±0.08 [.040 ±.003] (Plated-Thru Hole) Dia. Insulating Bushing Material — Nylon Part No. 222163-1 Only to be used on Part Nos. 5222462-1 and 5222006-1 16.64 [.655] Sq. 1.50 ±0.08 [.059 ±.003] (4 Holes) Dia. 1.02 ±0.08 [.040 ±.003] Dia. 2.96 [.115] Max. 6.61 [.260] Max. 14.61 [.575] Dia. 11.94 [.470] Dia. 1.02 ± 0.08 [.040 ± .003] 5.16 ± 0.08 [.203 ± .003] 5.16 ± 0.08 [.203 ± .003] 2.578 ± 0.076 [.1015 ± .0030] Dia. 2.06 ± 0.05 [.081 ± .002] Dia. 4 Plcs. 2.54 [.100] 14.73 [.580] 5 Plcs. Style F (Push-On) Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

3.81 ± 0.08 [.047 ± .007] 1.78 ± 0.08 [.070 ± .003] 7.62 ± 0.08 [.300 ± .003] 7.62 ± 0.08 [.300 ± .003] Dia. Dia. 25.40 ± 0.38 [1.000 ± .015] 11.43 ± 0.43 [.450 ± .017] 21.84 [.860] 17.78 [.700] 11.07 [.436] Max. Part No. 6274127-1 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Recommended PC Board Layout 6.6 ± 0.08 [.260 ± .003] 6.6 ± 0.08 [.260 ± .003] 3.3 ± 0.08 [.130 ± .003] 1.17 ± 0.08 [.046 ± .003] 2.11 ± 0.08 [.083 ± .003] Dia. (4 holes) Maximum PC Board Thickness 2.54 [.100] Dia. Press Fit, Bulkhead Vertical Metalized Jack includes hardware 28.78 [1.133] 4.37 ± 0.51 [.172 ± .020] 5 Plcs. 24.41 [.961] 10.80 [.425] + 0.08 – 0.00 + .003 ]– .000 5.54 [.218 + 0.13 – 0.00 + .005 ]– .000 ø 12.83 [ø .505 Part No. 6274124-2 Recommended PC Board Layout CL 6.15 [.242] 10.97 [.432] Mounting Height 28.4 [1.118] Max. 17.48 [.688] Sq. 15.88 [.625] Max. 1.7 ±0.05 [.067 ±.002] (2 Places) For Drive Screw 6.35 ±0.05 [.250 ±.002] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.05 [.500 ±.002] 12.7 ±0.05 [.500 ±.002] 1.02 ±0.08 [.040 ±.003] (Plated-Thru Hole 3 Places) Press Fit Vertical Metalized Jacks PC Board Mount (Continued) PC Board Thickness (Min.) Part No. 2.36 5221336-3.093 3.17 5221336-4.125 Recommended PC Board Layout Body Contact Center Part No. Plating Dielectric Plating Contact Dimension Nickel TPX Gold2 .171 [.007] 5413558-1 Tin TEFLON Gold2 .171 [.007] 5413558-2 Nickel TPX Gold2 .131 [.005] 5413558-3 Nickel TPX Gold1 .171 [.007] 5413558-5 Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Dia. Right-Angle Metalized Jacks PC Board Mount Ø 1.02 ± 0.08 [.040 ± .003] 3.43 [.135] 6.88 [.271] 3.43 [.135] 6.88 [.271] Holes Plated Through 5 Plcs. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors 36.07 [1.420] Max. Ø 15.88 ± 0.25 [.625 ± .010] BNC Connectors, 75 Ohm (Continued) Right-Angle Metalized Jacks PC Board/Panel Mount Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.64+0.08 -0.00 [.222+.003] -.000 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003] -.000 Part No. 5222117-1 36.07 [1.420]11/16 Right-Angle Adapter (Jack-Plug) Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene 22.89 [.901] Max. 14.53 [.572] 26.97 [1.062] Part No. 5415020-1 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003] -.000Recommended Panel Cutout Dia. Max. Bulkhead Jack-Jack Adapter Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Part No. 1274935-1 Jack-Jack Adapter Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Bulkhead Jack-Jack Adapter Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Body Plating Dielectric Part No. Tin TEFLON 6274425-2 1/2-28 Thread 27.64 ± 0.51 [1.088 ±.020] 10.97 ± 0.18 [.432 ±.007] 6.15 ± 0.25 [.242 ±.010] 11.66 [.459] 4.34 [.171] 36.04 [1.419] Max. Part No. 415567-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 8.89 ± 0.13 [.350 ± .005] + 0.13 – 0.00 + .005 – .000 Ø 9.65 [.380 ] Recommended Panel Cutout Bulkhead Jack-Push On Plug Adapter 41.92 [1.650]Ø 14.35 [.565] Max. Ø 8.43 [.332] Max. Part No. 1274007-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Mini BNC Connectors, 75 Ohm Product Facts ■ Bayonet locking coupling mechanism ■ 40% more interconnects in the same area ■ Compatible with TROMPETER tooling ■ Ideal for telecommunica- tions and broadband Tyco Electronics introduces the Mini BNC series of RF connectors to meet the growing demand for next generation telecommunica- tions and broadband applications where higher connector densities are needed. Preserving the characteristics that have made the standard BNC so popular, the Mini BNC offers the same high per- formance currently found in standard Tyco Electronics BNC series, but offers 40% more interconnects in the same area. The Mini BNC offering is an excellent fit for 75 Ohm systems, offering 500 mat- ing cycles, electrical per- formance through 2 GHz, and is completely inter- mateable with competitive miniature BNC offerings. Tyco Electronics’ Mini BNC product offers the same advantage of the bayonet locking mechanism as our standard BNC, allowing quicker connect and dis- connects than standard threaded interfaces. It uses standard BNC installation tooling meaning there is no need for retraining of field telco installers, and it uti- lizes the same PCB footprint on the jack side, providing a drop in replacement for DS3 telco applications. Mini BNC connector config- urations currently available include PCB, panel mount, and flexible cable. Other options can be reviewed as well, including additional cable sizes, adapters, PCB surface mounting, and tape and reel packaging. Call your local sales office or authorized distributor for additional information or samples of the Mini BNC connector series. Tyco Electronics is a leading supplier of RF and Microwave connectors and cable assemblies, and pro- vides advanced technology products from well known and industry leading brands, including AMP and M/A-COM. Material and Finish Shells, Bodies, Mtg Nuts — Brass, nickel plated Washers — Stainless Steel, nickel plated Ferrule — Copper or Brass, tin plated Center Contacts — Phos Bronze and Brass, gold plated Dielectrics — PTFE Frequency — DC – 2 GHz Nominal Impedance — 75 ohms Voltage Rating — 300 Volts (VRMS maximum) @ Sea Level VSWR — 1.10 max to 500 MHz (Return Loss -26.4 dB) 1.16 max to 1 GHz (Return Loss -22.6 dB) Insulation Resistance — 1,000 megohms minimum Dielectric Withstanding Voltage — 1,000 Volts (VRMS maximum) @ Sea Level Contact Resistance — 12 milliohms maximum Mechanical Characteristics Connector Durability — 500 mating cycles Force to Engage — 7 pounds maximum Force to Disengage — 1 pound minimum Center Contact Retention — 2 pounds minimum Cable Retention — 20 pounds minimum Vibration — EIA-364-28, Test Condition VII, Condition D Shock — EIA-364-27, Method H Environmental Characteristics Temperature Rating — –40 to +85°C Moisture Resistance — EIA-364-31, Method II, Condition C Thermal Shock — EIA-364-32 Note: Performance specifications are typical, but may not apply to all connector types. Related Product Data Product Specification — 108-2159 Sample Kit — 1773042 BNC Mini BNC 32.89 [1.29] Ref. 27.52 [1.08] Ref. TROMPETER is a trademark of Trompeter Electronics, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Mini BNC Connectors, 75 Ohm (Continued) Interface Dimensions Mini BNC Jack Dimensions ABCDEFGH J K L M Mini BNC Plug Dimensions ABCDEFGHJ Dimensions KLMNPQRST Ø H Reference Plane Ø A Ø E K J L G F Ø DØ CØ B M K M L J Ø H Ø AØ BØ D Ø T Ø C Ø N Typ. Q Ref. Reference Plane R° Typ. G Q F P E Contact Types

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Mini BNC Connectors, 75 Ohm (Continued) Flexible Cable — Crimp Attachment Straight Cable Plug Right-Angle Cable Plug Bulkhead Cable Jack Cable Part Number 735A 1274563-1 734A 1274563-2 RG 179 1274563-3 Cable Part Number 735A 1274566-1 734A 1274566-2 RG 179 1274566-3 Cable Part Number 735A 1274568-1 734A 1274568-2 RG 179 1274568-3 27.69 [1.090] Ø 11.56 [.455] Max. Ø 11.56 [.455] 22.73 [.895] Max. 23.89 [.940] Max. R 4.83 [1.90] 4.06 [.160] 7.82 Recommended Panel Cutout Tolerance: ± 0.08 [.003] 0.51 [.020] 13.46 [.530] 26.92 [1.060] Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Mini BNC Connectors, 75 Ohm (Continued) Printed Circuit Board Straight Jack Receptacle Right-Angle Jack Receptacle Right-Angle Bulkhead Jack Receptacle

2 Position, Right-Angle,

13.59 [.535] 2.54 [.100] 12.70 [.500] 9.50 [.374] 24.10 [.949] 7.65 [.301] 24.21 [.953] Ø 1.27 [.050] Typ. Ø 7.49 [.295] Typ. 0.51 [.020] Typ. 7.54 [.297] Sq. 0.76 [.030] Sq. Typ. Ø 0.97 [.038] 15.44 [.608] 3.99 [.157] Typ. 15.37 [.605] 10.62 [.418] 6.58 [.259] 3.99 [.157] Ø 0.97 [.038] Typ. 7.54 [.297] Sq. 0.76 [.030] Typ. Sq. 22.45 [.884] 3.99 [.157] Ø 0.97 [.038] Ø 10.92 [.430] Typ. 4.69 [.185] 3.81 [.150] 3/8 - 32 UNEF-2A 8.53 [.336] 8.48 [.334] 0.76 [.030] Sq. Typ. 7.54 [.297] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 3.94 [.155] Typ.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Decoupled Connectors Product Facts ■ Built-in chip capacitors filter high-frequency noise to panel ground ■ PC board mounting with vertical and standard or low-profile right-angle configurations ■ Cable mount bulkhead BNC version available ■ Drop-in replacement for Tyco Electronics standard BNC printed circuit board connectors ■ One-piece design and robotic capacity to reduce assembly time Tyco Electronics capaci- tively decoupled connectors provide the fast, better way to reduce noise and reduce ground loops on coaxial interconnections. The high- frequency noise generated by fast rise times can cause both false triggering of circuits as well as emissions that can be radiated or conducted outside the equipment. Such emissions can interfere with nearby equipment. Ground loops are also a problem for net- worked systems. Ground loops are caused when two interconnected units are at different voltage potentials. The typical way to handle such EMI and ground loop problems is to decouple the cable shield from the ground panel by soldering a ceramic disk capacitor between the cable shield and the panel. The capaci- tor shunts high-frequency noise to ground. While effective, this approach is time consuming and expensive. The Capacitively Decoupled connector has built-in chip capacitors. These capaci- tors establish the electrical contact between the outer shield and a clip. This clip provides a short electrical path between the capaci- tors and panel. As a result, high-frequency noise is effectively shunted to ground, while the DC path is blocked. The connectors offer com- patibility in design and manufacture. The same footprint and dimensional envelope make them a drop-in replacement for Tyco Electronics standard BNC or TNC printed circuit board connectors. In addi- tion, they can be robotically picked and placed for high- speed automated assembly to pc boards. Product Specification 108-1263 — BNC Decoupled PCB Press-Fit Connection 108-1269 — BNC Decoupled PCB Connectors 108-1490 — BNC Decoupled Cable Mount

Decoupled Connectors (Continued) 12.83+0.13 -0.00 [.505+.005]-.000 Dia. 5.54+0.08 -0.00 [.218+.003]-.000 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003]-.000 10.16 ±0.08 [.400 ±.003] 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] 2.01 ±0.08 [.079 ±.003] (2 Holes) (Top View) GS 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.200 ±.002] Mating Face GS (Top View) 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] 2.01 ±0.08 [.079 ±.003] (2 Holes) 5.08 ±0.05 [.200 ±.002] 34.93 [1.375] 15.08 [.625] 20.96 [.825] PC Board/Panel Mount Jacks Decoupled to Panel Material Body —V ALOX, black Dielectric — Polymethylpentene 34.93 [1.375] 20.96 [.825] B A CL Style B Right-Angle BNC Style A Vertical BNC Recommended PC Board Layout Note: Both styles are shown with a standard clip. See next page for other clip styles. For height dimensions see chart on page 85. Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Recommended PC Board Layout Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Decoupled Connectors (Continued) Clip Styles Extended For use with or without a jam nut Short Electrical Path For reduced series inductance in ground path Shortening Bar Standard 20.96 [.825] 19.30 [.760] Max. Clip Width 2.54 [.100] Max. Recommended Panel Mount .304 [.012] 20.96 [.825] Flush For closer centerline-to-centerline connector spacing 14.76 [.581] Clip Width 20.96 [.825] 2.54 [.100] Max. Recommended Panel Mount .304 [.012] 20.96 [.825]

Decoupled Connectors (Continued) PC Board/Panel Mount Jacks Decoupled to Panel (Continued) L L Mounting Post Styles Standard Compliant Capacitance/ Mounting L PartDescription Voltage Clip Post Mounting B* A* Style 1 No.Post Length Vertical 9400pF Standard Standard 3.48 —— A 5413476-250/H9024 1500VDC .137 Standard Right-Angle 9400pF Standard — — 15.88 8.59 B 5414215-1W/O Mounting Post 50/H90242 1500VDC .625 .338 Low Profile Right- Housing 50/H9024 Low Profile Housing 50/H9024 Low Profile 9400pF Standard Standard 4.01 13.18 —B 5414094-2Right-Angle 75/H9024 1500VDC .158 .519 1See pages 83 and 84 for Connector Styles. 2See customer drawing for PC Board Layout. *See page 83 for dimension reference. BNC Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Decoupled Connectors (Continued) Capacitance/ Contact Mounting L PartDescription Voltage Plating Clip Post Mounting B* A* No.Post Length 50/H9024Product Low Profile Right-Angle 7900pF Gold1 Standard Compliant 2.79 13.18 6.91 5414651-3 W/ ESD Protection 1500VDC .110 .519 .272 75/H9024Product Standard Right-Angle 9400pF Gold1 Standard Standard 4.01 15.88 8.59 5415085-1 W/ ESD Protection 1500VDC .158 .625 .338 ESD Protected *See page 83 for dimension reference. Right-Angle BNC Jack PC Board/Panel Mount Decoupled to Panel ESD Protected See page 83 Style B for panel cutout and recommended PC board configuration. ESD Device ESD Protection 1/2-28 Thread Note: See Tyco Electronics Customer drawing for voltage breakdown rating. Right-Angle BNC Jack PC Board/Panel Mount Decoupled to Board ESD Protected Recommended PC Board Layout Recommended Panel Cutout Part No. 5415205-1 Capacitance Voltage 9400pF 1500VDC 10.16 ± 0.08 [.400 ± .003] 5.08 ± 0.05 [.200 ± .002] 2.54 ± 0.05 [.100 ± .002] 0.89 ± 0.08 [.035 ± .003] Dia. 2.01 ± 0.08 [.079 ± .003] Dia. 11.13 + 0.13 - 0.00 + .005 - .000[.438 ] 12.83 + 0.13 - 0.00 + .005 - .000[.505 ] Dia. 13.18 [.519] Compliant Board Lock ESD Device Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Decoupled Connectors (Continued) Press-Fit, Vertical BNC Jacks, PC Board Mount Decoupled to Board Material Dielectric— TEFLON Isolation Pad — Polyester Plating Body — Nickel Ground Clip — Nickel Center Contact — Gold Action Pin Legs — Gold Part No. 5414553-1 50 Ohm Part No. 5414493-4 75 Ohm BNC Bulkhead Jacks, Crimp 17.48 [.688] Interchangeable RG/U Termination Center Body Dies for Hand Description Contact Dielectric Style Tool 69710-1 Part No.Cable Type Plating Plating & 626 Pneu. Head 318161-1 50/H9024 RG 58, 58A, 58B, 58C Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-1 5414758-1 50/H9024 RG 174, 174A, 316, 188, 188A Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-3 5414758-2 50/H9024 RG 174, 174A, 316, 188, 188A Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-3 5414758-3 75/H9024 ESD RG 179, 187 Hex Crimp Gold Nickel Polymethylpentene Commercial 58425-2 5415779-1 16.51 [.650] Max. over points Sq. 15.88 [.625] Max. 40.64 [1.600] Max. Recommended Panel Cutout 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003] -.000 12.70 [.500] 6.35 [.250] 12.70 [.500] 6.35 [.250] 1.70 [.067] 2 Plc. Plated Thru Hole For Drive Screw Dia. 1.02 ±0.08 [.040 ±.003] 3 Plc. Plated Thru Hole Dia. Ground Area 9.14 [.360] Dia. OD 6.35 [.250] Dia. ID Recommended PC Board Layout Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Self-Terminating PC Board Connectors Product Facts ■ Built-in chip resistor termi- nates the signal line to the proper characteristic imped- ance when in the unmated state ■ Can be ordered with stan- dard resistance values (50, 75 and 100 Ohms) ■ Fits into printed circuit board footprint of standard BNC PCB connectors ■ One-piece design is com- patible with robotic inser- tion and wave soldering Tyco Electronics Self- Terminating printed circuit board BNC connectors pro- vide the capability to auto- matically terminate an input-output port to the sys- tem characteristic imped- ance. This feature eliminates the need for external terminators when an I/O port is not being used. The Self-Terminating BNC jack contains a chip resistor which bridges the signal and ground paths when the connector is not mated to a BNC plug. When mated, the resistor is switched out of the circuit for direct signal transmis- sion to the board. The footprint of this connec- tor is compatible with stan- dard BNC connectors, allowing it to be easily installed into existing circuit board designs and suitable for robotic insertion for high speed automated assembly onto the PC board. The Self-Terminating BNC is available in standard resist- ance values for use in net- working and video systems. Contact Tyco Electronics for new designs that include switching and capacitively decoupled versions. Material Body — Polyester, PBT, black Dielectric — Polyester, PBT, natural Plating Shell —T i n Center Contact — Gold on mating end and Tin on solder tails 14.73 [.580] 15.86 [.625] 1/2-28UNEF-2A 34.96 [1.375] 20.96 [.825] Product Termination Part Resistance Number Self-Terminating BNC PCB 75 Ω 5414367-2 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

■ Crimp connectors require only one-stroke crimping of both conductors, plus braid and cable support ■ Lower installed cost with one-stroke crimp ■ Reduced noise levels because of Tyco Electronics solderless crimping tech- niques ■ Captive inner contact stability ■ No danger of heat damage to coaxial cable ■ Ease of inspection ■ Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ PC Board soldered connec- tors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ Certified by Canadian Standards Association File No. LR 7189 R R R The Twin BNC Connector is a quick connect/discon- nect, weatherproof connec- tor designed in accordance with MIL-C-39012 to meet the stringent requirements of MIL-STD-1553 Multiplex Data Bus. These twin coaxial cable connectors are a unique development by Tyco Electronics which has resulted in the production of high level RF components. Termination of these con- nectors to twin conductor cable is made with Tyco Electronics exclusive one crimp method which simultaneously terminates inner conductors, outer braid and cable support with one stroke of the matching Tyco Electronics tool. These rugged connectors accommodate today’s most commonly used twin con- ductor cable sizes. Nominal Impedance — Non-constant Working Voltage — 500 volts rms sea level Insulation Resistance — 5000 megohms min. Dielectric Withstanding Voltage — 1500 volts rms sea level Mechanical Characteristics Mating/Unmating — Bayonet lock-quick connect/ disconnect Cable Attachment — Crimp type - Simultaneous center and braid Coupling Nut Retention — 100 lbs. [444 N] min. Cable Retention — 25 lbs. [111 N] min., RG 108A/U cable Durability — 200 cycles per MIL-C-39012 Environmental Characteristics Temperature Range — -55°C to +85°C Vibration — MIL-STD-202, Method 204, Condition B Shock — MIL-STD-202, Method 213, Condition I, 100 G’s Salt Spray — MIL-STD-202, Method 101, Condition B Temperature Cycling —M IL-STD- 202, Method 102, Condition C Materials Brass — QQ-B-626 Beryllium Copper — QQ-C-530 TEFLON —M IL-P-19468 Polypropylene — General purpose Copper, Annealed— QQ-C-576 Phosphor Bronze — QQ-B-750 Silicone Rubber — ZZ-R-765 Plating Silver — QQ-S-365 Nickel — QQ-N-290 Tin — ASTM-B-545 Packaging — All connectors are pack- aged individually unless otherwise noted. Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Twin BNC Connectors (Continued) Plugs Bulkhead Jack [.575] Max. 38.1 Max.[1.500] H 11.05 [.435 ] +0.13 -0.00 +.005 -.000 Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout RG/U Center Body Integral DieContact DielectricCable Plating Plating Hand Tool Part No. 108, 108A Silver Silver TEFLON 69667 5332225 BELDEN 9272, 89272 Silver Nickel Polypropylene 69667 5332225-5 TROMPETER Silver Silver TEFLON 69667 5332225-3TWC-124-2 ROLM 49D2401 Silver Nickel Polypropylene 69667 5332225-6RAYCHEM 7824D013 CERTI-CRIMP Die Insert for RG/U Center Body Hand Tool Integral Die Tools: Hand Cable Contact Plating Dielectric with Hand Tool Tool-69710-1, Part No. Plating Integral Die 626 Pneu. Head 318161-1 108, 108A Silver Silver TEFLON -5— 69667 69708 5332342BELDEN 9272, 89272 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. ROLM is a trademark of the Rolm Corp. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TROMPETER is a trademark of Trompeter Electronics, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Twin BNC Connectors (Continued) Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Right-Angle PC Board/ Panel Mount Jacks Material Body —V ALOX, White Center Contacts — Gold Dielectric — Polymethylpentene Vertical PC Board/ Panel Mount Jacks Material Body —V ALOX, White Center Contacts — Gold Dielectric — Polymethylpentene With Mounting Posts Part No. 5221198-1 15.88 Mtg. [.625] Hgt. 36.83 Max.[1.450] With Mounting Posts Part No. 5228686-1 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout 2.01 ±0.05 [.079 ±.002] (2 Holes) Dia. 0.89 ±0.08 [.035 ±.003] (3 Holes) Dia. Recommended PC Board Layout Recommended PC Board Layout Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 6.35 ±0.08 [.100 ±.003] 5.08 ±0.08 [.200 ±.003] 10.16 ±0.08 [.400 ±.003] 3.2 ±0.08 [.126 ±.003] 1.6 ±0.05 [.063 ±.002] 35.56 [1.400] Mtg. Hgt. 2.01 ±0.05 [.079 ±.002] (2 Holes) Dia. 0.89 ±0.05 [.035 ±.002] (3 Holes) Dia. 2.54 ±0.08 [.100 ±.003] 5.08 ±0.08 [.200 ±.003] 5.08 ±0.08 [.200 ±.003] 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] 3.2 ±0.13 [.126 ±.005] 1.6 ±0.05 [.063 ±.002] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Twin BNC Connectors (Continued) 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Part No. 5332215 Recommended Panel Cutout H 35.72 Max.[1.406] Maximum Panel Thickness 3.18 [.125] Bulkhead Jack Adapter Plating Body — Silver Center Contacts — Silver Dia. 5.08 ±0.08 [.200 ±.003] 3.48 ±0.08 [.137 ±.003] 1.17 ±0.08 [.046 ±.003] Dia.0.89 ±0.05 [.035 ±.002] 2 Plcs. Dia.2.01 ±0.05 [.079 ±.002] 2 Plcs. 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] 3.20 ±0.13 [.126 ±.005] Part No. 5415832-1 Recommended Panel Cutout Vertical PC Board Mount Jack Plating Body — Nickel Center Contacts — Gold Dielectric — Polymethylpentene PCB Configuration 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 11.05 ±0.08 [.435 ±.003] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors F Series and G Series Connectors Product Specification 108-1518 — Connector Coaxial, F Series, RF , Single Crimp Plug 108-1643 — Connector Coaxial, F Series, RF , PCB Mounted 108-1755 — Connector Economy, F Series, RF Coaxial, PCB 108-1757 — Connector, 15 amp, G Series Jack, PCB 108-1758 — Connector, F Series Jack, PCB, Surface Mount 108-1629 — Feedthrough, Sealed F Port Jack Instruction Sheets 408-9221 — Coaxial Series F Plug Connectors 408-4402 — Series F & G Coaxial Cable Bulkhead Jack Connector 408-4291 — PRO-CRIMPER II Hand Tool Assembly 58622-1 and 58622-2 Tyco Electronics F Series connectors offer perform- ance, which is driven by evolving OEM requirements and expectations. Improved VSWR beyond 1 GHz, high current carrying capability, and pressure sealed prod- ucts are now part of the standard product offering. Designs compliant with ANSI/SCTE, Bellcore, UL/CSA, and various other industry and agency stan- dards are also available. Both cable applied and PCB terminated products are offered in a variety of styles. The cable connec- tors are designed for fast, accurate termination with tools common to the industry. Application cost reductions can be achieved using Tyco Electronics PCB terminated products; press- fit designs eliminate the need for sold ering. Center of gravity control and PCB retention designs prevent tipping and eliminate fixturing during soldering. Integral mechanical keys and “D flats” prevent rotation in panels. These products provide the highly reliable, cost-effective solutions demanded by today’s evolving marketplace. Product Facts ■ Designs meet SCTE requirements where applicable ■ Plugs, jacks and adapters available ■ Board mount and cable mount available ■ Surface mount connectors available ■ Sealed product available ■ High current carrying capabilities

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors F Series Connectors Plugs RG/U Termination Body “B” PRO-CRIMPER† Cable Type Plating Style Threads Hand Tool Assembly Part No. 6C r imp Nickel A — 58425-3, 58436-2, 221539-2or 58621-2

6 Screw-On Nickel B M7x1 — 221540-2

59 58425-3, 58436-2,BELDEN 9104, Crimp Nickel C — or 58621-2 414766-1 9100* 58425-3, 58436-2,59 Crimp Nickel C — or 58621-2 414766-8 *NID to inside cable. † 8.23 [.324] Hex Crimp. Crimp Style A Screw-On Style B Crimp Style, Hex C 21.59 [.850] Max. RG/U Termination Center Body Termination Part No.Cable Type Contact Plating ToolingPlating

179 Braid: M 22520/5-01 w/ DANIELS

5415226-1Headend Crimp Tin Nickel Die Set Hx4-1637 (.128 Hex) Patch Panel Contact: M 22520/2-01 w/ DANIELS Positioner K727, Pos. 2 Right-Angle Plugs, Crimp RG/U Termination Center Contact Body Termination Cable Type Plating Plating Tooling Part No. 6 Crimp Tin Nickel use .324 inch Hex 887098-1Std. Cable 1.50 [.059 ] ± 0.30 ± .012 [.413 ] 10.50 ± 0.20 ± .008 39.11 [1.540 ] ± 0.20 ± .008 9.40 [.370] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. DANIELS is a trademark of Daniels Manufacturing Corporation.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors F Series Connectors (Continued) Bulkhead Jacks, Crimp, Rear Mount RG/U Center Contact Body Die Set Part No.Cable Plating Plating

179 Bright Nickel 220210-1* 5415712-1Tin

**Use with hand tool 354940-1 Bulkhead Jacks, Crimp, Splash Resistant, Front Mount RG/U Center Contact Body Die Set Part No.Cable Plating Plating

179 Bright Nickel 220210-1* * 5415569-2Tin

**Use with hand tool 354940-1 Right-Angle PC Board Mount Jacks C B A [.380 ] Dia.9.65 – 0.00 + 0.13 + .005 – .000 8.89 [.350 ] – 0.00 + 0.13 + .005 – .000 0.99 ± 0.08 [.039 ± .003] 4.11 ± 0.08 [.162 ± .003] 8.20 ± 0.08 [.323 ± .003] 2.50 ± 0.08 [.098 ± .003] 4 Plcs. Body Plating Center Contact Dimensions Part Barrel Base Plating ABC No. Recommended Panel Cutout PC Board Layout Dia.9.65 [.380 ] – 0.00 + 0.13 + .005 – .000 0.99 ± 0.08 [.039 ± .003] 4.11 ± 0.08 [.162 ± .003] 8.20 ± 0.08 [.323 ± .003] 2.50 ± 0.08 [.098 ± .003] 4 Plcs. Recommended Panel Cutout PC Board Layout Body Plating Center Contact Dimensions Part Barrel Base Plating ABC No. C B A *Connectors willl accept a center conductor, diameter of 0.51-1.19 [.020-.047] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors F Series Connectors (Continued) Right-Angle PC Board Mount Jack, High Temperature 9.65 [.380 ] Dia. – 0.00 + 0.13 + .005 – .000 – .000 8.89 [.350 ] – 0.00 + 0.13 + .005 0.99 ± 0.08 [.039 ± .003] 4.11 ± 0.08 [.162 ± .003] 8.20 ± 0.08 [.323 ± .003] 2.50 ± 0.08 [.098 ± .003] 4 Plcs. Dielectric Solder Post Dimensions Part Bottom Middle Front Plating ABC No. *Pin in paste reflow / high temperature processing. Recommended Panel Cutout PC Board Layout Right-Angle PC Board Mount Jacks (Continued) 9.65 [.380 ] Dia. – 0.00 + 0.13 + .005 – .000 8.03 [.316 ] – 0.00 + 0.13 + .005 – .000 2.26 [.089 ] 4 Plcs. ± 0.08 ± .0030.99 [.039 ] ± 0.08 ± .003 4.57 [.180 ] ± 0.08 ± .003 9.14 [.360 ] ± 0.08 ± .003 5.77 [.227 ] ± 0.08 ± .003 Recommended Panel Cutout PC Board Layout Body Plating Center Contact Dimensions Part Barrel Base Plating ABC No. C B A C B A *High temperature versions use PTFE dielectric (see table) Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors F Series Connectors (Continued) Adapters Vertical PC Board Mount Jacks Connector will accept a center conduc- tor diameter of 0.56–1.19 [.022–.047] 4.32 ± 0.08 [.170 ± .003] 8.64 ± 0.08 [.340 ± .003] 8.64 ± 0.08 [.340 ± .003] 2.77 ± 0.08 [.109 ± .003] 4 Plcs. 1.22 ± 0.08 [.048 ± .003] 4.32 ± 0.08 [.170 ± .003] PC Board Layout Part No. 5415322-2 Surface Mount, Straddle Jack Contact will accept center conductor diameter range 0.56–1.19 [.022–.047] Center of gravity balanced for automated pick and place and anti-tipping during solder reflow process. 15.88 [.625] 1.91 [.075] 2 Plcs. 13.21 [.520] R 1.27 [.050]14.61 [.575] 9.40 [.370] 18.29 [.720] 12.95 [.510] 0.76 [.030] Typ. 1.78 [.070] 1.65 [.065] Typ. Recommended PC Board Layout Jack to Jack Feed through Adapter Jack to Plug Right-Angle Adapter Part No. 282938-2 Part No. 5887089-1 16.0 [.630] 9.50 [.374] 23.62 [.930] Dia.9.65 [.380 ] – 0.00 + 0.13 + .005 – .000 Recommended Panel Cutout Part No. 6274020-1 9.50 [.374] 13.49 [.531] Sq. Typ.8.64 ± 0.08 [.340 ± .003] 1.07 ± 0.05 [.042 ± .002] 4 Plcs. 1.37 [.054] 4.32 [.170] 4.32 [.170] 8.64 [.340] 2.36 [.093] 8.64 [.340]Typ. 4 Plcs. Typ. PC Board Layout 36.45 [1.43] Part No. 5887046-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors G Series Connectors Bulkhead Jack, Crimp RG/U Termination Body Cable Type Plating Part No.

179 Crimp Nickel 5415683-1

Termination Tooling: Use 220210-1 die set for Contact only. Use Certi-Crimp Hand Tool 220009-1 for ferrule. Bulkhead Jack, PC Board Connector will accept center conductor diameter range 0.97–1.65 [.038–.065] (415332-1 only) 9.73 – 9.58 [.383 – .377] 8.15 – 8.00 [.321 –.315] Recommended Panel Cutout for 5415332-1 9.73 – 9.58 [.383 – .377] Recommended Panel Cutout for 6274032-1 Part No. 5415332-1 (15 Amp) Part No. 6274032-1 Jack, Bulkhead PC Board Connector will accept center conductor diameter range 0.97–1.07 [.038–.042] Part No. 5887000-1 2.08 [.082] 4 Plcs. 7.62 [.300] 3.81 [.150] 1.27 [.050] Typ. Typ. 7.62 [.300] Typ. 2.03 [.080] Typ. 1.32 [.052] Typ. Part No. 6274045-1 Vertical PC Board Mount Plug PC Board Layout Right-Angle PC Board Mount Plug Includes board retention feature to prevent tipping during solder process. 10.29 ± 0.08 [.405 ± .003] 9.14 ± 0.08 [.360 ± .003] 1.93 ± 0.08 [.076 ± .003] 4 Plcs. 0.89 ± 0.08 [.035 ± .003] 1.37 ± 0.08 [.054 ± .003] 4.57 ± 0.08 [.180 ± .003] PC Board Layout Part No. 5415406-2 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors G Series Connectors (Continued) Adapters F Jack to G Plug Bulkhead Adapter Connector will accept center conductor diameter range of 0.51–1.19 [.020–.047]. Panel nut 887003-3 available for float mounting. Part No. 415523-1 12.95 [.510] 11.30 [.445] Recommended Panel Cutout F Jack to G Jack Bulkhead Adapter Part No. 415327-1 + 0.13 – 0.00 + .005 ]– .000 9.65 [.380 Dia. Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors Tyco Electronics offers a complete line of SMA connectors designed for performance to 18 GHz to satisfy the growing demand for SMA connectors in the wireless communications industry. The SMA product line offers stainless steel bodies, as well as non- ferrous metals. Various plating options are available, including Gold and White Bronze. The SMA interface is fully compatible with Mil-C-39012. While still offering various options on military (QPL) approved connectors, Tyco Electronics has devel- oped a complete offering tailored to the commercial Communications industry. This includes 3 piece flexi- ble cable products for pop- ular RG 316, 142 and RD 316 cable utilizing industry standard HEX crimps. The SMA series meets the performance, quality and application requirements of the commercial market- place. This includes White Bronze plating, a unique finish developed by Tyco Electronics to address the performance needs of the telecommunications market. This plating is highly resistant to wear, and con- tains no ferrous metals, thus displaying excellent inter- modulation characteristics. To satisfy the broad range of commercial applications, SMA connectors are avail- able in a broad range of standard configurations including; straight and right-angle cable applied plugs, bulkhead cable jacks, two and four hole flange mount panel jacks, straight and right-angle pcb mount jacks and various between and in series adapters. Numerous pack- aging and testing options are also available to meet specific system criteria as well. Additionally, standard military approved (QPL) interfaces are offered as well. Including connectors for semi-rigid cable and micro strip applications. The 3 Piece SMA offering is designed especially for applications in cellular infrastructure where InterModulation Products (IMP) must be minimized. By limiting non-linearities within the connectors, IMP is reduced and increased channel capacity can be offered. Product Facts ■ Performance to 12.4 GHz and beyond ■ Available in various base metal options, including stainless steel, brass and zinc diecast ■ Uses industry standard crimp tools and processes ■ Available with corrosion resistant, non-magnetic White Bronze plating ■ Meets all performance requirements for MIL-C-39012. Between Series Adapters For SMA Between Series Adapters, see pages 251-260.

SMA Connectors (Continued) MIL-C-39012 Applicable Paragraph General Material 3.3 Steel corrosion resistant per ASTM-A-582 and ASTM-A-484, Type 303. Beryllium copper per ASTM-B-196. PTFE Fluorocarbon per ASTM-D-1710. MIL-G-45204, ASTM-B-488. All other metal parts shall be finished as to provide a connector which meets the corrosion requirements. Design 3.4 The design shall be such that the outline shown in this catalog and the interface dimensions of MIL-STD-348A are met. Electrical Insulation Resistance 3.11 The insulation resistance shall not be less than 10,000 megohms. Corona Level 3.22 Refer to applicable military slash sheet, product drawing or spec. Dielectric Withstanding Voltage 3.17 Refer to applicable military slash sheet, product drawing or spec. RF High Potential 3.23 Refer to applicable military slash sheet, product drawing or spec. Contact Resistance 3.16 Refer to applicable military slash sheet, product drawing or spec. VSWR 3.14 Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on cable used. RF Leakage 3.26 Refer to applicable military slash sheet, product drawing or spec. Insertion Loss 3.27 Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on cable used. Mechanical Force to Engage 3.5.1 The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force is not applicable. Coupling Nut Retention 3.25 60 lbs. min. Applicable for plug connectors only. Cable Retention 3.24 Refer to applicable military slash sheet or consult factory. Mating Characteristics 3.7 Applicable to jack connectors only. Reference MIL-STD-348A for dimensions; oversize test pin Connector Durability 3.15 The connector to be tested and its mating connector shall be subjected to 500 insertion and withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. Recommended Mating Torque — 7 to 10 in.-lbs. Environmental Vibration 3.18 Specification MIL-STD-202, method 204, test condition D Shock 3.19 Specification MIL-STD-202, method 213, test condition I Thermal Shock 3.20 Refer to applicable military slash sheet or consult factory. Corrosion (Salt Spray) 3.13 Specification MIL-STD-202, method 101, test condition B. Moisture Resistance 3.21 Specification MIL-STD-202, method 106. No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity. Specifications 101 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Electrical Contact Resistance Insulation Dielectric Corona RF HighFrequency VSWR (milliohms max.) Resistance Withstanding Extinction RF Potential RF Connector Type Cable Max. x (fGHz) Center Outer (megohms Voltage Voltage at Transmission at 5 MHz Leakage (GHz) Contact Contact min.) (Volts RMS) 70,000 Ft. Loss (V RMS) (dB min.) (V RMS min.) & Jacks Solder RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz) Attachment RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz) Straight Cable Plugs Attachment RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz) RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz) Printed Circuit Board N/A 18.0 N/A 2.0 2.0 10,000 1000 250 N/A 670 N/AMount Straight Terminal Right-Angle N/A 12.4 N/A 2.0 2.0 10,000 1000 250 N/A 670 N/APrinted Circuit 1. Maximum operating frequency of cable per MIL-C-17. 2. Specifications do not apply to hermetic or compression crimp connectors. 3. For Brass SMA: Frequency Range DC-6GHz, Impedance 50 Ohms, Insulation Resistance.

SMA Connectors (Continued) Interface Mating Dimensions F D G Dia. J Dia. B Dia. Ref. Plane Note 2 A Dia. B Dia.A Dia. H Dia. D E C Ref. Plane Note 2 C D H E G F K .250-36 UNS-2B Thd. .250-36 UNS-2A Thd. G Dia. H Dia. Plug B Plug A Plug Dimension Minimum Maximum A 6.35 —.250 B— 4.59 .1808 C— 3.43 .135 D 0.00 0.25 .000 .010 E— 2.54 .100 F 0.00 0.25 .000 .010 G 0.90 0.94 .0355 .037 H 0.00 0.38 .000 .015 Jack Dimension Minimum Maximum A 5.28 5.49 .208 .216 B 4.60 —.181 C 1.91 1.98 .075 .078 D 0.00 0.25 .000 .010 E 0.38 1.43 .015 .045 F 2.92 —.115 G 0.00 0.25 .000 .010 H 4.32 —.170 J .124 1.30 .049 .051 K 5.54 —.218 Notes: 2. When fully engaged, the two reference planes must coincide with metal to metal contact. 3. Metric equivalents (to the nearest 0.01mm) are given for general information only. 103 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Flexible Cable Straight Cable Plug, Solder Heat Shrink Tubing 7.9 [.312] Hex. Ref. Plane A 16.7 [.658] Ref. 30.2 [1.187] Ref. Cable Type Body Material Contact Contact Dimension Instruction Part RG/U & Finish Captivation Attachment A Sheet No. 55, 58, 141, 142, Stainless, Gold1 No Solder 19.7 408-4821 1051638-1223, 303, 400 .775 174, 188, 316 Stainless, Gold 1 No Solder 17.5 408-4756 1051644-1.690 1Coupling nut is passivated stainless steel. Straight Cable Jack, Solder .250-36 UNS-2A Heat Shrink Tubing Ref. Plane 16.6 [.654] Ref. A 6.4 [.250] Hex. 25.6 [1.007] Ref. Cable Type Body Material Contact Contact Dimension Instruction Part RG/U & Finish Captivation Attachment A Sheet No. 55, 58, 141, 142, Stainless, Gold No Solder 18.5 408-4820 1051852-1223, 303, 400 .730 Bulkhead Cable Jack, Solder Ref. Plane .250-36 UNS-2A 7.9 [.312]Hex. 3.2 [.125] Max. Panel 9.50 [.374] Ref. A 31.10 [1.225] Ref. 11.4 [.450] Recommended Mounting Hole Ø 6.4 [.250] Min. 6.0 [.235] Min.Shrink Tubing Cable Type Body Material Contact Contact Dimension Instruction Part RG/U & Finish Captivation Attachment A Sheet No. RG 55, 58, Stainless, Gold No Solder 24.0 408-4817 1051861-1141, 142, 300 .945 174, 188, 316 Stainless, Gold No Solder 21.0 408-4817 1051942-1.825 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMA Connectors (Continued) Flexible Cable (Continued) Right-Angle Cable Plug, Solder Ref. Plane 7.9 [.312] Hex. Heat Shrink Tubing 16.9 [.666] Ref. 13.5 [.530] Ref. 10.5 [.413] Ref. A Ref.25.9 [1.020] Cable Type Body Material Contact Contact Dimension Instruction Part RG/U & Finish Captivation Attachment A Sheet No. 55, 58, 141, 142, Stainless, Gold1 Yes Solder 16.0 408-4816 1052063-1223, 303, 400 .630 174, 188, 316 Stainless, Gold 1 Yes Solder 11.2 408-4815 1052067-1.440 1Coupling nut is passivated stainless steel. Straight Cable Plug, Clamp Cable Type Body Material Contact Contact Dimension Instruction Part RG/U & Finish Captivation Attachment A Sheet No. 174, 188, 316 Stainless, Pass. Y es Solder 2.9 408-4906 1050721-1.116 19.0 [.750] A Ref. 7.9 [.312] Hex Straight Cable Jack, Clamp Cable Type Body Material Contact Contact Dimension Instruction Part RG/U & Finish Captivation Attachment A Sheet No. 174, 188, 316 Stainless, Pass. Y es Solder 2.9 408-4906 1050903-1.116 17.8 [.700] A Ref. 7.9 [.312] Hex 105 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Flexible Cable (Continued) Bulkhead Feedthrough Cable Jack, Clamp Cable Type Body Material Contact Contact Instruction Part RG/U & Finish Captivation Attachment Sheet No. 174, 188, 316 Stainless, Pass. Y es Solder 408-4704 1050996-1 Ref. Plane .250-36, UNS-2A Recommended Mounting Hole 7.9 [.312]Hex. 3.2 [.125] Max. Panel Ø 6.4 [.250] Min. 6.0 [.235]Min. 9.5 [.374] Ref. 22.6 [.890] Max. 11.4 [.450] Right-Angle Cable Plug, Clamp Cable Type Body Material Contact Contact Instruction Part RG/U & Finish Captivation Attachment Sheet No. 174, 188, 316 Stainless, Pass. Mechanical Solder 408-4965 1051140-1 14.3 [.562] Max. 18.0 [.710] Max. 7.9 [.312] Hex. Ref. Plane 16.9 [.665] Ref. 12.9 [.509] Ref. 10.0 [.392] Ref. Straight Cable Plug, Crimp 25.4 [1.00] Ref. 22.4 [.883] Ref. 7.9 [.312] Hex. Ref. Plane Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 174, 179, 187, Stainless, Pass. Mechanical Solder/Crimp 2 1055236-1 408-4661 1056443-1188, 316 RD316 Stainless, Pass. Mechanical Solder/Crimp 2 1055236-11 408-4661 1056436-1 55, 142, 223, 400 Stainless, Pass. Mechanical Solder/Crimp 2 1055236-1 408-4661 1056438-1 174, 179, 187, Brass, Mechanical Solder/Crimp 2 1055236-1 408-4661 1082034-1188, 316 White Bronze 1Use die 1055270-1 to crimp RD316 ferrule. 2Use die 1055880-1 to crimp center contact. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMA Connectors (Continued) Flexible Cable (Continued) Straight Cable Jack, Crimp 27.43 [1.080] Max. 6.35 [.250] Hex. Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet Style No.Part No. 174, 316 Brass, Nickel Mechanical Solder 1 408-4032 A 5447648-3 58, 141, 303 Stainless, Pass. Mechanical Solder 1055236-1 408-4704 B 1051867-1 174, 188, 316 Stainless, Pass. Mechanical Solder 1055236-1 408-4708 B 1051855-1 178, 196 Stainless, Pass. Mechanical Solder 1055236-1 408-4806 B 1051869-1 1Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule crimp. Bulkhead Feedthrough Cable Jack, Crimp 26.4 [1.040] 6.4 [.250] 6.0 [.235] Ref. 11.4 [.450]Dia. Min. 3.2 [.125] Max. Panel Min. 7.9 [.312] Hex .250-36 UNS-2A Lock Washer Recommended Mounting Hole Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 174, 179, 187, Stainless, Pass. Mechanical Solder/Crimp 2 1055236-1 408-4661 1056452-1188, 316 RD316 Stainless, Pass. Mechanical Solder/Crimp 2 1055236-13 408-4661 1056445-1 58, 141, 303 Stainless, Pass. Mechanical Solder/Crimp 2 1055236-1 408-4661 1056450-1 55, 142, Stainless, Pass. Mechanical Solder/Crimp 2 1055236-1 408-4661 1056447-1223, 400 174, 188, 316 Brass, Nickel Mechanical Crimp 1 408-4032 5448103-2 1Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule crimp. 2Use die 1055880-1 to crimp center contact. 3Use die 1055270-1 to crimp RD316 ferrule. Style A .250-36 UNS-2A Heat Shrink Tubing Ref. Plane 19.3 [.761] Ref. Hex. 21.3 [.837] Ref. 6.4 [.250]Hex.7.9 [.312] 33.1 [1.304] Ref. Style B 107 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. DANIELS is a trademark of Daniels Manufacturing Corporation.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Flexible Cable (Continued) Right-Angle Cable Plug, Crimp 20.4 [.802] Ref. 10.5 [.413] Ref. 13.5 [.530] Ref. 16.9 [.665] Ref. 17.2 [.677] Ref. Ref. Plane 7.9 [.312] Hex. Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 174, 179, 187, Stainless, Pass. Mechanical Solder 1055236-1 408-4659 1056462-1188, 316 58, 141, 303 Stainless, Pass. Mechanical Solder 1055236-1 408-4659 1056456-1 Right-Angle Cable Plug, Crimp 12.1 [.475] Ref. 27.0 [1.062] 16.9 [.665] Ref. 7.9 [.312] Hex Ref. Ref.13.4 [.530] Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 55, 142, Stainless, Pass. Epoxy Solder 1055236-1 408-4681 1052072-1223, 400 174, 188, 316 Stainless, Pass. Epoxy Solder 1055236-1 408-4683 1052076-1 178, 196 Stainless, Pass. Epoxy Solder 1055236-1 408-4801 1052098-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMA Connectors (Continued) Flexible Cable (Continued) Straight Push-On 20.65 [.813] Ref. 27.97 [1.101] Ref. 6.35 [.250] Plug Sleeve Clearance Area Min. 17.32 [.682] Ref.14.15 [.557] Ref. Ref. Plane 5.49 [.216] Max.Ø 12.70 [.500] 5.08 ± 0.13 [.200 ± .005] Thread Length 27.61 [1.087] Ref. 31.50 [1.240] Ref. 6.35 [.250] Plug Sleeve Clearance Area Min. Ref. Plane 5.49 [.216] Max.Ø 12.70 [.500] 5.08 ± 0.13 [.200 ± .005] Thread Length Right-Angle Push-On 109 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Cable Type Body Material Contact Contact Part RG/U & Finish Captivation Attachment No.

316 Beryllium Copper, Gold Mechanical Solder/Crimp 1274694-1

Cable Type Body Material Contact Contact Part RG/U & Finish Captivation Attachment No.

316 Beryllium Copper, Gold Mechanical Crimp 1408541-1

Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Direct Solder Attachment, Semi-Rigid Cable Straight Cable Plug 8.40 [.330] 5.4 [.213]Ref. Ø 3.66 [.144] Cable Type Body Material Contact Contact Solder Instruction Part RG/U & Finish Captivation Attachment Assembly Kit Sheet No.Part No. 402 (3.58 [.141]) Stainless, Pass. No Center No Center 1055420-1 408-4761 1050757-1Contact Contact Straight Cable Plug 8.1 [.320] Ref. 11.2 [.440] Ref. Ø 4.6 [.180] Ø 3.67 [.144] RG402/U Ø 2.26 [.089] RG405/U Cable Type Body Material Contact Contact Solder Instruction Part RG/U & Finish Captivation Attachment Assembly Kit Sheet No.Part No. 402 (3.58 [.141]) Stainless, Gold 1 No Solder 1055420-1 408-4764 1050525-1 405 (2.16 [.085]) Stainless, Gold 1 No Solder 1055420-1 408-4765 1050770-1 402 (3.58 [.141]) Stainless, Gold 1 No Center No Center N/A — 1050542-1Contact Contact 405 (2.16 [.085]) Stainless, Gold 1 No Solder 1055420-1 — 1050548-1 1Coupling nut is passivated stainless steel. Straight Cable Jack 12.7 [.500] Ø 3.66 [.144] RG402/U Ø 2.26 [.089] RG405/U 10.8 [.424] Ref. Cable Type Body Material Contact Contact Solder Instruction Part RG/U & Finish Captivation Attachment Assembly Kit Sheet No.Part No. 402 (3.58 [.141]) Stainless, Gold No Solder 1055420-1 408-4767 1050854-1 405 (2.16 [.085]) Stainless, Gold No Solder 1055420-1 408-4833 1050859-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMA Connectors (Continued) Direct Solder Attachment, Semi-Rigid Cable (Continued) Bulkhead Cable Jack Recommended Mounting Hole 8.6 [.339] Ref. 6.0 [.235] 10.5 [.415] 12.7 [.500] 19.0 [.748] 2.4 [.093] Ø 4.6 [.180] Ø 3.66 [.144] RG402/U Ø 2.26 [.089] RG405/U Max Panel Min. Ø 6.4 [.250]Min. Cable Type Body Material Contact Contact Solder Instruction Part RG/U & Finish Captivation Attachment Assembly Kit Sheet No.Part No. 402 (3.58 [.141]) Brass, Gold No Solder 1055420-1 408-4768 1082029-1

2 Hole Flange Mount

Ø 15.9 [.625] Ø 2.6 [.102] 12.2 [.481] 5.7 [.223] 14.2 [.560] 9.5 [.375] 1.7 [.065] 7.6 [.299] .250-36 UNS-2A 2 Plcs. Ref. Ø 3.66 [.144] RG402/U Ø 2.26 [.089] RG405/U Cable Type Body Material Contact Contact Solder Instruction Part RG/U & Finish Captivation Attachment Assembly Kit Sheet No.Part No. 402 (3.58 [.141]) Stainless, Gold No Solder 1055420-1 408-4767 1051052-1 405 (2.16 [.085]) Stainless, Gold No Solder 1055420-1 408-4883 1051046-1

4 Hole Flange Mount

14.2 [.560] 7.6 [.299] 9.5 [.375] 8.6 [.340] Ø 2.6 [.102] Ø 3.66 [.144] RG402/U Ø 2.26 [.089] RG405/U 12.7 [.500] 4 Plcs. 2 Plcs. Sq. Ref. Cable Type Body Material Contact Contact Solder Instruction Part RG/U & Finish Captivation Attachment Assembly Kit Sheet No.Part No. 402 (3.58 [.141]) Stainless, Gold No Solder 1055420-1 408-4767 1051081-1 405 (2.16 [.085]) Stainless, Gold No Solder 1055420-1 408-4883 1051085-1 111 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Semi-Rigid Cable Right-Angle Cable Plug, Direct Solder Attachment 7.9 [.312] Hex. Ref. Plane 17.1 [.675] Ref. 7.9 [.312] Ref. 13.6 [.535] Ref. 10.5 [.413] Ref. Ø 3.66 [.144] RG402/U Ø 2.26 [.089] RG405/U Cable Type Body Material Contact Contact Solder Instruction Part RG/U & Finish Captivation Attachment Assembly Kit Sheet No.Part No. 402 (3.58 [.141]) Stainless, Gold 1 Epoxy Solder 1055420-1 408-4831 1051151-1 405 (2.16 [.085]) Stainless, Gold 1 Epoxy Solder 1055420-1 408-4831 1051157-1 405 (2.16 [.085]) Brass, Gold Mechanical Solder 1055420-1 408-4831 1088312-1 1Coupling nut is passivated stainless steel. Straight Cable Plug, Crimp 9.8 [.387] Ref. 6.9 [.270] RG402/U 7.1 [.278] RG405/U Ø 3.63 [.143] RG402/U Ø 2.26 [.089] RG405/U Ref Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4695 1050598-1 402 (3.58 [.141]) Stainless, Pass. No Center Contact Solderless 1055835-1 408-4690 1050740-1 Straight Cable Plug — Low Profile, Crimp 5.8 [.229] Ref. 8.6 [.337] Ref. Ø 3.66 [.144] RG402/U Ø 2.26 [.089] RG405/U Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 402 (3.58 [.141]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4696 1050602-1 405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4697 1050611-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMA Connectors (Continued) Semi-Rigid Cable (Continued)

2 Hole Flange, Crimp

16.70 [.657] Max. 6.30 [.250] 6.00 [.235] Dia. Min. OSM Jack After Crimping 14.50 [.569] Ref. 8.60 [.339] Ref. 7.90 [.312] Hex. 11.10 [.437] Hex. Ref. Plane After Crimping Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 402 (3.58 [.141]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4954 1051005-1 405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4689 1051007-1 Right-Angle Cable Plug, Crimp Ø 3.63 [.143] RG402/U Ø 2.26 [.089] RG405/U 7.9 [.312] Hex. Ref. Plane 15.8 [.622] Ref. 12.6 [.497] Ref. 9.7 [.383] Ref. 14.43 [.568] After Crimping 11.25 [.443] Ref. After Crimping Cable Type Body Material Contact Contact Crimp Instruction Part RG/U & Finish Captivation Attachment Tooling Sheet No.Part No. 402 (3.58 [.141]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4691 1051145-1 405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4692 1051147-1 113 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

2 Hole Flange Mount Jack

14.6 [.575] 9.5 [.375] 1.7 [.065] 5.7 [.223] 12.2 [.481] Typ. 1.3 [.050] 0.8 [.031] Dia. Min. Dia. 2.6 [.102] Dia. 2 Plcs. 15.9 [.625] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052544-1 .250-36 UNS-2A Ref. Plane 7.6 [.299] Ref.1.7 [.065] 9.5 [.375] 14.6 [.575] 0.8 [.030] 5.7 [.223] 12.2 [.481] Ø 4.1 [.162] Ø 15.9 [.625]Ø 1.3 [.050] Ø 0.8 [.031] Ø 2.6 [.102] 2 Plcs. Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052534-1 114 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Panel Mount, Solder Pot Terminal

4 Hole Flange Mount Plug

12.7 [.500] Sq.18.0 [.707] Ref. 12.9 [.507] 1.7 [.065] Ref. 8.6 [.340] Typ. 1.3 [.050] Dia. 7.9 [.312] Hex 6.4 [.250] Dia. Min. 2.6 [.102] Dia. 4 Plcs. Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy N/A -65 to 125° C 1052324-1

4 Hole Flange Mount Jack

.250-36UNS-2A 4 Plcs.Ref. Plane 14.6 [.575] Ø 2.6 [.102] 12.7 [.500] Sq. 8.6 [.340] Typ. Ø 1.3 [.050] Ø 0.9 [.035] 7.6 [.299] 9.5 [.375] 1.7 [.065] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052422-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMA Connectors (Continued) Panel Mount Bulkhead Feedthrough Jack Receptacle, Solder Pot Terminal 6.0 [.235]6.4 [.250] 17.0 [.668] 12.7 [.500] 1.6 [.062] 1.3 [.050] 4.1 [.162]7.9 [.312] Recommended Mounting Hole Min. Min. Dia. Hex. Dia. Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy N/A -65 to 125° C 1053092-1 Press-In Cable, Jack Panel Recommended Mounting Hole + 0.03 – 0.01 + .0010 – .0004 Ø 7.00 [.276 ] Ø 13.00 ± 0.10 [.512 ± .004] 9.60 ± 0.10 [.378 ± .004] 1/4" - 36 UNS-2A + 0.05 – 0.03 + .002 – .001 Ø 7.40 [.291 ] 4.00 ± 0.10 [.157 ± .004] 11.00 ± 0.10 [.433 ± .004] 1.50 ± 0.10 [.059 ± .004] 22.40 [.882] 115 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Cable Type Body Material Contact Temperature RG/U & Finish Captivation Range Part No.

316 D Brass, Gold Mechanical –65 to 125° C 619115-1

Press-In Jacks, Straight Terminal Ø 8.50 ± 0.60 [.335 ± .024] 10.10 ± 0.10 [.398 ± .004] 6.10 ± 0.10 [.240 ± .004] 2.50 ± 0.20 [.098 ± .008] Ø 5.50 [.217] Ref. + 0.03 – 0.07 + .001 – .003 Ø 0.50 [.020 ] 8.90 ± 0.20 [.350 ± .008] Part Number 1460468 1.10 ± 0.10 [.043 ± .004] 4.50 ± 0.10 [.177 ± .004] + 0.00 – 0.10 + .000 – .004 Ø 1.00 [.039 ] + 0.10 – 0.20 + .004 – .008 Ø 8.00 [.315 ] + 0.40 – 0.20 + .016 – .008 3.50 [.138 ] + 0.02 – 0.03 + .0008 – .0012 5.05 [.199 ] 14.10 ± 0.20 [.555 ± .008] 2.00 ± 0.10 [.079 ± .004] 5.00 ± 0.10 [.197 ± .004] Part Number 1460469 Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Brass, White Bronze Mechanical N/A –65 to 125° C 1460468-1 Brass, Gold Mechanical N/A –65 to 125° C 1460469-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Panel Mount, Straight Terminal .250-36 UNS-2A 9.5 [.375] Ref. Plane 7.6 [.299] Ref. 1.7 [.065] 14.99 [.590 ] ± 0.25 ± 0 27.43 [1.080 ] ± 0.25 ± 0 Ø 1.3 [.050] Ø 4.1 [.162] Ø 2.6 [.102] 12.7 [.500]Sq. 8.6 [.340] Typ. 4 Plcs. Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated None -(100-fGHz) -65 to 165° C 1052518-1 Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052523-1 Stainless, Gold Epoxy -(60-fGHz) -65 to 125° C 1052522-1

2 Hole Flange Mount Plug

1.3 [.050]4.1 [.162] Dia. 7.9 [.312] Hex 2.6 [.102] 15.9 [.625] 12.2 [.481] Dia. 2 Plcs. Ref.25.3 [.995] 6.6 [.260] Ref.12.9 [.507] 1.7 [.065] 8.4 [.330] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052349-1 5.7 [.223] 12.2 [.481] Ø 15.9 [.625] Ø 2.6 [.102] 2 Plcs. .250-36 UNS-2A Ref. Plane 9.5 [.375] 7.6 [.299] Ref. 1.7 [.065] 14.99 [.590 ] ± 0.25 ± 0 27.43 [1.080 ] ± 0.25 ± 0 Ø 1.3 [.050] Ø 4.1 [.162] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052552-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Panel Mount, Straight Terminal (Continued) Bulkhead Feedthrough Jack Receptacle .250-36 UNS-2A Lockwasher Ref. Plane 10.82 [.426] Ref. 7.9 [.312] Hex. Ø 4.1 [.162] Ø 1.3 [.050] 12.7 [.500] 4.1 [.160] 1.9 [.076] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1053222-1 11.6 [.458] 1.7 [.065] 4.1 [.162] 1.3 [.050] Ø 15.9 [.625] 12.2 [.481] 5.7 [.223]Ø 2.6 [.102] 2 Plcs. 15.0 ± 0.25 [.590 ± .010] 11.1 ± 0.13 [.437 ± .001] 7.9 ± 0.25 [.312 ± .010] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Mechanical -(90-fGHz) -65 to 165° C 1052986-1 8.6 [.340] 12.7 [.500] Sq. Ø 2.6 [.102] 4 Plcs. Typ. Ø 4.1 [.162] Ø 1.3 [.050] .250-36 UNS-2A Ref. Plane 11.6 [.458] 9.7 [.382] Ref. 1.7 [.065] 9.65 ± 0.25 [.380 ± .010] 12.83 ± 0.25 [.505 ± .010] 17.91 ± 0.25 [.705 ± .010] 14.99 ± 0.25 [.590 ± .010] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Mechanical -(90-fGHz) -65 to 165° C 1052978-1 Stainless, Passivated Mechanical -(90-fGHz) -65 to 165° C 1052982-1 Note: Part Numbers are RoHS compliant except: lIndicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Panel Mount Receptacle, Straight Terminal Slot Width Ref. Plane 4 Plcs..250-36 UNS-2A Ø 1.3 [.050] 12.7 [.500]Sq. 8.6 [.340]Typ. Ø 2.6 [.102] 1.3 [.050]1.7 [.065] 9.5 [.375] 7.6 [.299]Ref. Body Material Contact Slot Width RF Leakage Temperature Part Stainless, Passivated Epoxy 0.5 [.018] -(60-fGHz) -65 to 125° C 1052563-1 Receptacle, Tab Terminal 1.7 [.065] 4 Plcs.Ø 2.6 [.102] 2.5 [.100] 8.6 [.340] 12.7 [.500]Sq.12.9 [.507]Ref. 9.9 [.390]Ref. 0.1 [.005] X Thk. 1.2 [.050] Wide Tab Typ. Body Material Contact Tab RF Leakage Temperature Part & Finish Captivation Width db min. Range No. Stainless, Passivated Epoxy 1.3 [.050] -(60-fGHz) -65 to 125° C 1052360-1 Receptacle, Tab Terminal 9.5 [.375] 2.5 [.100] 7.6 [.299] 1.7 [.065] 12.7 [.500] 8.6 [.340] Ø 2.6 [.102] Sq. 0.13 [.005] X Thk. 0.5 [.020] Wide Tab 4 Plcs. 2 Plcs. Ref. Body Material Contact Tab RF Leakage Temperature Part & Finish Captivation Width db min. Range No. Stainless, Passivated Epoxy .51 [.020] -(60-fGHz) -65 to 125° C 1052898-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Receptacle, Panel Mount, Tab Terminal .250-36UNS-2A Ref. Plane 0.13 [.005] X Thk. 1.27 [.050] Wide Tab 7.59 [.299]Ref. 1.7 [.065] 9.5 [.375] 2.5 [.100] 2 Plcs. Ø 2.6 [.102] Ø 15.9 [.625] 5.7 [.223] 12.2 [.481] Body Material Contact Horizontal RF Leakage Temperature Part & Finish Captivation Tab db min. Range No. Stainless, Passivated Epoxy /H12012 -(60-fGHz) -65 to 125° C 1052577-1 Receptacle, for Microstrip Transmission Line Circuits 12.7 [.500]Sq. 8.6 [.340]Typ. .250-36 UNS-2A Ref. Plane 7.59 [.299] Ref. 1.7 [.065] 0.3 [.010] 2.2 [.085] 3.2 [.125] 4.4 [.175] 9.5 [.375] Ø 2.6 [.102] 4 Plcs. Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052528-1 Receptacle, for Microstrip Transmission Line Circuits 5.7 [.223] 12.2 [.481] Ø 15.9 [.625] Ø 2.6 [.102] 2 Plcs. .250-36 UNS-2A Ref. Plane 9.5 [.375] 3.2 [.125] 1.2 [.049] 7.6 [.299]Ref. 1.7 [.065] Ø 2.2 [.085] Ø 0.3 [.010] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052902-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) Field Replaceable Hermetic Launchers (Continued) Accepts Pin Dia. AEMI Gasket .250-36UNS-2A Ref. Plane 4 Plcs.Ø 2.6 [.102] 9.5 [.375] 1.7 [.065] 0.1 [.005]Ref. 8.6 [.340] 2 Plcs. 7.6 [.299] Ref. 12.7 [.500]Ref. Material & Finish Captivation Pin Diameter A Part No. Stainless, Passivated Mechanical .38 [.015] 1052684-1 Receptacle without EMI/RFI Gasket 12.7 [.500] 8.6 [.340] Ø 2.6 [.102] 4 Plcs. 2 Plcs. Accepts Pin Dia. A 9.5 [.375] 7.6 [.299] Ref. Sq. 1.7 [.065] Material & Finish Captivation Pin Diameter A Part No. Stainless, Passivated Mechanical .91 [.036] 1052643-1 5.6 [.222] 12.2 [.481] Ø 15.9 [.625] Ø 2.6 [.102] 2 Plcs. .250-36 UNS-2A EMI Gasket Accepts Pin Dia. A Ref. Plane 9.5 [.375] 7.6 [.299] Ref. 0.1 [.005] Min. 1.7 [.065] Material & Finish Captivation Pin Diameter A Part No. Stainless, Passivated Mechanical .30 [.012] 1052628-1 Stainless, Passivated Mechanical .38 [.015] 1052689-1 Stainless, Passivated Mechanical .46 [.018] 1052634-1 Receptacle without EMI/RFI Gasket, Field Replaceable Hermetic Launchers 9.5 [.375] 7.6 [.299] 2 Plcs. Accepts Pin Dia A 1.7 [.065] 5.7 [.223] 12.2 [.481] Ø 15.9 [.625] Ø 2.6 [.102] Material & Finish Captivation Pin Diameter A Part No. Stainless, Passivated Mechanical .51 [.020] 1052652-1 Stainless, Passivated Mechanical .91 [.036] 1052646-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) PC Board Mount Right-Angle Jack Ref. Plane 11.6 [.458] 5.1 [.200] Typ.2.8 [.110] Typ. 9.7 [.382] Ref. 0.5 [.020] Typ. 6.4 [.250] Sq. 1.0 [.040] Sq. 4 Plcs. 6.35 [.250 ] ± 0.25 ± 0 13.5 [.530] 3.9 [.155] Ref. Ø 1.3 [.050] 15.24 [.600] Max. 4.60 [.181] Min. Dia. Max.9.65 [.380] 3.94 [.155] 11.68 [.460] 1.93 ± .05 [.076 ± .002] 1.27 ± .03 [.050 ± .001] 6.35 [.250] Dia.1.02 ± .05 [.040 ± .002] Typ. PC Board Mount Vertical Jack Ø 1.3 [.050] .250-36 UNS-2A Ref. Plane 3.9 [.155] 13.5 [.530] 9.5 [.375] Ref. 5.1 [.200] Typ. 7.6 [.299] Ref. 6.3 [.250] Sq. 1.0 [.040] Sq. 4 Plcs. 6.35 ± 0.13 [.250 ± .005] 6.35 ± 0.13 [.250 ± .005] 1.27 ± 0.03 [.050 ± .001] 9.53 ± 0.13 [.375 ± .005] 19.94 [.785] 12.70 [.500] 12.70 [.500] 5.28 [.203] Ø 0.63 [.025] 3 Plcs. Material & Finish Style No. Part No. Stainless, Gold 1 1053354-1 Brass, Gold 2 221789-1 Brass, Gold 2 221789-3 Brass, Nickel Plate 3 6274096-1 Material & Finish Style No. Part No. Stainless, Gold 1 1053378-1 Stainless, Gold 2 221790-1 Style 1 5.1 [.200] 2 Plcs. Ø 1.7 [.067] 5 Plcs. Recommended Mounting Holes Style 2 Style 3 5.1 [.200] 2 Plcs. Ø 1.7 [.067] 5 Plcs. Recommended Mounting Holes Style 1 Style 2 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) In-Series Adapter, Jack to Jack Ref. Plane Ref. Plane 3.2 [.125] 12.7 [.500] 8.8 [.348] Ref. 5.5 [.218] Across Flats Frequency Material & Finish Captivation Part No. DC-18.0GHz Stainless, Gold Epoxy* 1053488-1 Frequency Material & Finish Captivation Part No. DC-18.0GHz Stainless, Passivated Epoxy* 1053635-1 *All adapters listed above employ epoxy captivation. Mechanically captivated versions are also available. Please consult Tyco Electronics. In-Series Adapter, Plug to Plug 5.5 [.218] Across Flats7.9 [.312] Hex Ref.22.2 [.875] 3.2 [.125] In-Series Adapter, Jack to Plug, Right-Angle 14.8 [.583] 7.9 [.312] Hex 15.9 [.625] Ref. 12.7 [.500] 11.6 [.458] Frequency Material & Finish Captivation Part No. DC-12.4GHz Stainless, Passivated Mechanical 1055065-1 In-Series Adapter, Jack to Jack, Right-Angle Ref. Plane Ref. Plane9.7 [.383] Ref. 9.7 [.383] Ref.11.7 [.459] 11.7 [.459] .250-36 UNS-2A Frequency Material & Finish Captivation Part No. DC-12.4GHz Stainless, Passivated Mechanical 1055018-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMA Connectors (Continued) In-Series Adapter, Plug to Plug, Right-Angle Ref. Plane Ref. Plane 14.0 [.550] Ref. 11.1 [.438] Ref. 7.9 [.312] Hex. 14.0 [.550] Ref. 11.1 [.438] Ref. Frequency Material & Finish Captivation Part No. DC-18.0GHz Stainless, Passivated Mechanical 1055047-1 In-Series Adapter, Jack to Plug, Connector Saver .250-36 UNS-2A 13.3 [.524] Ref. 7.9 [.312] Hex. 18.3 [.720] Ref. Ref. Plane Ref. Plane 5.6 [.219] Across Flats Frequency Material & Finish Captivation Part No. DC-18.0GHz Stainless, Passivated Epoxy 1054426-1 Test Adapter, Plug to Jack, Quick Release Ø 12.70 [.500] Ø 10.20 [.400] 24.90 [.982] 28.60 [1.125] 23.00 [.905] 5.50 [.215] Ref. Ref. Ref. Reference Plane Across Flats OSM Jack Retaining Ring .250-36 UNS-2A OSM Plug Reference Plane Frequency Material & Finish Captivation Part No. DC-18.0GHz Stainless, Passivated Epoxy 1053780-1 In-Series Adapter, Jack to Jack, Bulkhead Feedthrough Recommended Mounting Hole Ø 6.4 [.250] Min. 6.0 [.235] Min. Lock Washer.250-36 UNS-2A .250-36 UNS-2A Ref. PlaneRef. Plane 9.5 [.375] Hex. 14.6 [.575] 18.4 [.723] Ref. 22.2 [.875] 1.7 [.065] 7.9 [.312] Hex. 6.4 [.250] Max Panel Frequency Material & Finish Captivation Part No. DC-18.0GHz Stainless, Passivated Epoxy* 1054869-1 *Mechanically captivated version available. Please consult Tyco Electronics. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors QMA Connectors Snap-On SMA Series of RF Connectors Product Facts ■ Positive snap-on interface facilitates assembly ■ Intermateable with competitor product ■ Excellent RF performance to ■ Ideal for Communications and Industrial Applications Tyco Electronics’ next gen- eration high performance RF products QMA (Snap-On SMA) connectors series offers the same high quality and performance currently found in the standard Tyco Electronics SMA series but does not require the coupling nut torque. By integrating a snap-on feature to the design, denser packaging can be achieved, and the overall applied cost is dramatically reduced. The QMA connec- tor series is excellent for communications as well as industrial applications. The QMA offering is designed for 100 mating cycles, oper- ates through 6 GHz, and is completely intermateable with competitive QMA offer- ings. This new QMA prod- uct is not intermateable with standard SMA interfaces. QMA connectors are avail- able in a broad range of standard configurations, including PCB and panel mount, flexible and semi- rigid cable, and adapters. Other options can be reviewed as well, including additional cable sizes, PCB surface mounting, and tape and reel packaging. The QMA connector series is a cost effective solution for the challenging demands of today’s commercial mar- ketplace, with applications including cellular base sta- tion, handsets, and test and measurement. Call your local sales office or author- ized distributor for additional information or samples of the QMA connector series. Tyco Electronics is a lead- ing supplier of RF and Microwave connectors and cable assemblies, and pro- vides advanced technology products from well known and industry leading brands, including AMP and M/A-COM. Material and Finish Shells and Bodies — Brass, nickel plated Collars — Phosphor bronze, white bronze plated Outer Contacts — Beryllium copper, nickel plated Center Contacts — Beryllium copper, gold plated Dielectrics — PTFE Frequency — dc – 6 GHz Nominal Impedance — 50 ohms Voltage Rating — 335 Volts (VRMS max.) @ Sea Level VSWR — 1.15 : 1 max. @ 6 GHz Insulation Resistance — 5,000 megohms min. Insertion Loss— .25 dB Max @ 6 GHz Dielectric Withstanding Voltage — 1000 Volts (VRMS max.) @ Sea Level Contact Resistance — Center Contact — 5 milliohms max. Outer Contact — 4 milliohms max. Mechanical Characteristics Connector Durability — 100 mating cycles Force to Engage — 27 Newtons Force to Disengage — 20 Newtons Retention Force (mated pair) — 60 Newtons min. Cable Retention — Dependent upon cable type Environmental Characteristics Temperature Rating — -40 to +125°C Vibration — EIA-364-28, Test Condition VII, Condition D Shock — EIA-364-27, Method H Moisture Resistance — EIA-364-31, Method III Thermal Shock — EIA-364-32 Note: Performance specifications are typical, but may not apply to all connector types. Related Product Data Product Specifiation — 108-2087 Sample Kit — 1654882 QMA Snap-On Interface Board SMA Threaded Interface

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors QMA Connectors (Continued) Semi-Rigid Cable — Direct Solder Attachment Straight Cable Plug Right-Angle Cable Plug Cable Part Number RG 402 1408346-1 Cable Part Number RG 402 1408347-1 Straight Cable Jack Bulkhead Cable Jack Cable Part Number RG 402 1408348-1 Cable Part Number RG 402 1408349-1 20.50 [0.81] Ref. Ø 10.50 [0.41] 18.70 [0.74] Ref. 14.60 [0.57] Ref. Ø 10.50 [0.41] Ø 5.60 [0.22] Ø 5.60 [0.22] Ø 8.00 [0.31] 10.24 [0.40] 23.05 [0.91] 16.05 [0.63] 7.00 [0.28] 2.00 [0.08] 6.50 [0.26] Min. 3.20 [0.13] Max. Panel 6.46 [0.25] Across Flat 9.50 [0.38] Hex. 9.50 [0.38] Hex. 18.05 [0.71] 8.71 [0.34] 15.10 [0.60] Ref. Ø 7.20 [0.28] Min. Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors QMA Connectors (Continued) Cable Dim. A Part Number RG 174, 22.90 1408333-1188, 316 0.90 RD 316 22.90 1408333-30.90 RG 400 25.20 1408333-50.99 RG 58 25.20 1408333-70.99 Cable Dim. A Dim. B Part Number RG 174, 17.20 13.10 1408336-1188, 316 0.68 0.52 RD 316 17.20 13.10 1408336-30.68 0.52 RG 400 19.50 15.40 1408336-50.77 0.61 RG 58 19.50 15.40 1408336-70.77 0.61 Flexible Cable — Crimp Attachment Straight Cable Plug Cable Dim. A Part Number RG 174, 25.90 1408338-1188, 316 1.02 RD 316 25.90 1408338-31.02 RG 400 28.20 1408338-51.11 RG 58 28.20 1408338-71.11 Straight Cable Jack Cable Dim. A Part Number RG 174, 9.90 1408339-1188, 316 0.39 RD 316 9.90 1408339-30.39 RG 400 12.20 1408339-50.48 RG 58 12.20 1408339-70.48 Bulkhead Cable Jack Right-Angle Cable Plug Recommended Mounting Hole Ø 10.50 [0.41] Ø 10.50 [0.41] Ø 5.60 [0.22] Ø 5.60 [0.22] Ø 7.20 [0.28] Ø 8.00 [0.31] 8.71 [0.33] 18.05 [0.71] 16.05 [0.63] 2.00 [0.08] 9.10 [0.36] 18.70 [0.74] Ref. 15.10 [0.60] Ref. A Ref. A Ref. Ref. Plane A Ref. A Ref. B 9.50 [0.38] Hex. 6.46 [0.25] Across Flat 3.20 [0.13] Max. Panel 9.50 [0.38] Hex. 6.50 [0.26] Min. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors QMA Connectors (Continued) Printed Circuit Board Straight Jack Receptacle Part Number 1408332-1 Recommended Mounting Hole 1.02 [0.04] Sq. Typ. Ø 1.70 [0.07] Typ. Ø 1.27 [0.05] Ø 5.60 [0.22] 15.10 [0.60] 11.00 [0.43] 5.08 [0.20] Typ. 5.08 [0.20] Typ. 6.35 [0.25] Sq. Right-Angle Jack Receptacle Part Number 1408337-1 Straight Terminal Press-In Jack Recommended Mounting Hole 1.02 [0.04] Sq. Typ. Ø 1.70 [0.07] 5 Plcs. 5.60 [0.22] Dia. 5.08 [0.20] Typ. 5.08 [0.20] Typ. 6.35 [0.25] Sq. 12.40 [0.49] 15.60 [0.61] 13.60 [0.54] 9.50 [0.37] 9.95 [.392] 5.00 [.197] 2.00 [.079] 1.20 [.047] 4.00 [.157] 4.50 [.177] 0.75 ± 0.05 [.030 ± .002] Ø 6.83 ± 0.03 [.269 ± .001] Body Material Contact RF Leakage Temperature Part & Finish Captivation db min. Range No. Brass, Gold Mechanical N/A –65 to 125° C 619215-1 Note: Part Numbers are RoHS compliant except: lIndicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors QMA Connectors (Continued) Adapters — Between Series QMA Plug to SMA Plug Part Number 1408393-1 30.60 [1.20] Ref. 7.90 [0.31] Hex. 8.70 [0.34] Hex. QMA PlugSMA Plug QMA Jack to SMA Plug Part Number 1408343-1 21.50 [0.85] Ref. 6.35 [0.25] Hex. 7.90 [0.31] Hex. SMA Plug QMA Jack Adapters — In Series QMA Plug to QMA Jack Part Number 1408342-1 27.70 [1.09] Ref. QMA PlugQMA Jack Straight Terminal 4-Hole Flange Mount Jack Receptacle Part Number 1408341-1 Screw-In Front Mount Jack Receptacle Part Number 1408340-1 Ø 2.60 [0.10] 4 Plcs. Ø 5.60 [0.22] 8.00 [0.31] Hex. 17.90 [0.70] 15.00 [0.60] 1.53 [0.06] 13.55 [0.53] .250 - 36 UNS-24 12.70 [0.50] Sq. 8.64 [0.34] Typ. Ø 4.06 [0.16] Ø 1.27 [0.05] Ø 5.60 [0.22] Ø 1.27 [0.05] Ø 4.06 [0.16] 4.10 [0.16]1.90 [0.07] 1.50 [0.59] 10.70 [0.42] 20.00 [0.79] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Series 1.0/2.3 (50 Ohm/75 Ohm) RF Coax Connectors Miniature coaxial connec- tors series 1.0/2.3 (CECC 22230 and IEC 61169-29) coaxial connectors are devised to meet the requirements of compact electronic instrumentation. All plugs and jacks with Zo = 50 Ω are designed for a number of different 50 Ω and 75 Ω cables. Owing to the large demand, the Series 1.0/2.3 has also been optimized as a 75 Ω design into the GHz range. The different types of coupling mechanisms, such as screw on, slide-in and latching coupling permit space-saving installation. In addition, an extensive range of measurement accessories, adapters as well as terminations is available. The quality- determining factors have been established on the basis of corresponding measurements and test procedures in accordance with national and interna- tional standards for RF connectors (IEC 61169-1, MIL-C-39012 etc.). High-quality materials ensure high reliability even in industrial atmospheres. The contact principle is the pin-socket principle and the contacts are gold plated to ensure perfect contact mat- ing. The inner conductor parts are held in PTFE (Polytetrafluoroethylene). The reduced dimensions of all component parts of these connectors permit a com- pact hole spacing (installa- tion pitch) of 6.8 [0.27] depending upon the corre- sponding cable diameters. The cable is connected by crimping the cable braid to the plug or jack body, the inner conductor is soldered or crimped. In most applications, the plug and jack belong to the same coupling type group. In special instances, such as for measurement pur- poses, different coupling types can be used together. Between Series Adapters For Series 1.0/2.3 Adapters please see pages 251-260.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Series 1.0/2.3 (50 Ohm/75 Ohm) (Continued) RF Coax Connectors Technical Data Electrical and mechanical characteristics in accordance with CECC 22230 Characteristic impedance — 50 Ω/75 Ω Frequency range — up to 10 GHz/

2 GHz

Reflection factor, referred to 50 Ω cable1 — up to 1 GHz, r ≤ 0.05 up to 4 GHz, r ≤ 0.07 up to 10 GHz, r ≤ 0.15 Reflection factor, referred to 75 Ω cable1 — up to 2 GHz, r ≤ 0.10 Insulation resistance — initial value ≥ 1 GΩ after stressing ≥ 200 MΩ Screening effectiveness2 — ≥ 90 dB Inner conductor contact resistance — after stressing ≤ 10 mΩ Outer conductor continuity — after stressing ≤ 7.5 mΩ Voltage proof3 — flexible cables (RG 316) — at sea level, 750 V, 50 Hz — at 20 km altitude, 150 V, 50 Hz Working voltage 3 — flexible cables (RG 316) — at sea level, 350 V, 50 Hz — at 20 km altitude, 65 V, 50 Hz Service life — 500 cycles Climatic category — 40/85/21 Notes:

1 Guide values, depending on cable

type and connector style.

2 Values apply to a straight screw

and latching coupling with suitable cable.

3 Some cables suitable for use with

these connectors have lower char- acteristic values than specified here.

4 For applicable cable types see

page 151. Coupling Types Type A Screw coupling; version with union nut This type permits the plug and jack to be screwed together manually by means of a union nut secured to the plug. This is necessary for readily accessible locations, front panel test points and cable connections. Type C Slide-in coupling; version with centering ferrule In this type of coupling, the plug features a guide ferrule with a conical entry surface. This ensures that the float- able bulkhead plugs with cable connection make a reliable electrical connec- tion to the rigid installed jack. Examples of this are single and multi-contact connections of slide-in applications. “W” denotes the allowed spacing of the mounting panel for satisfac- tory contact when the con- nection is made. Type F Latching coupling (Quick Lock) In this version, the cable plugs bear a funnel ferrule with built-in spring which snaps into a groove on the jack, simultaneously locking the connection. The connec- tion can be easily separated by lightly pulling the outer sleeve of the plug. This type of coupling can be used with a higher packing den- sity, as the screw coupling.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Series 1.0/2.3, 50 Ohm RF Coax Connectors 18.0 [0.71] Ø 6.5 [0.26] Cable Coupling Type Ø Max. Part No. RG 316 A 2.67 1393670-10.105 Plugs, Solder/Crimp 1) Detent for jack 24.64 [.970] Ø 7.70 [.303] Ø 6.20 [.244] Ø 3.10 [.122] Cable Coupling Type Ø Max. Part No. WP93385L2 F 2.67 619223-10.105 24.64 [.970] Ø 7.70 [.303] Ø 6.20 [.244] Ø 3.10 [.122] Cable Coupling Type Ø Max. Part No. LMR 240 F 2.67 619224-10.105 28.50 [1.122] Ø 7.90 [.311] Max. Max. Ø 7.90 [.311] Ø 4.15 [.163] Cable Coupling Type Ø Max. Part No. LMR 240FR F 6.3 1460010-10.248 25.50 [1.004] Max. Max.Ø 7.90 [.311] Ø 6.20 [.244] Ø 3.10 [.122] Cable Coupling Type Ø Max. Part No. WP93385L2 F 6.3 619085-10.248 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Series 1.0/2.3, 50 Ohm (Continued) RF Coax Connectors 17.0 [0.67] Ø 4.1 [0.16] Ø 1.7 [0.07] Ø 3.6 [0.14] Cable Coupling Type Ø Max. Part No. RG 316 A, C, F 2.6 4-1393670-40.10 Bulkhead Jack, Solder/Crimp 8.0 [0.31] Ø 4.1 [0.16] 8.4 [0.33] 0.6 1.5 Ø 7.3 [0.29] Mounting Panel ECN0867 Coupling Type Part No. C, F 1393670-8 Bulkhead Solder Jack 5.08 [0.2] Ø 0.9 [0.04] a 11.1 [0.44] 0.95 [0.04] 0.5 [0.02] Ø 4.1 [0.16] 6.0 [0.24] Coupling Dim Part Type a No. C, F 14.6 3-1393670-40.57 C, F 15.6 3-1393670-50.61 Vertical PC Board Mount Jack Recommended Mounting Holes Pitch 2.54 [0.10] Ø 1.5 [0.06] Ø 0.9 [0.04] 0.95 [0.04] 5.08 [0.2] 12.0 [0.47] 19.5 [0.77] 16.0 [0.63] 0.5 [0.02] M5.5x0.5 [0.22]x[0.02]6.0 [0.24] Coupling Type Part No. A, C, F 3-1393670-6 Vertical PC Board Mount Bulkhead Jack Recommended Mounting Holes Pitch 2.54 [0.10] Ø 1.5 [0.06] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Series 1.0/2.3, 50 Ohm (Continued) 15.9 [0.63] M5.5x0.5 [0.22]x[0.02] Ø 4.1 [0.16] 5.9 [0.23] 7.0 [0.28] 3.3 [0.13] 7.4 [0.29] 3.7 [0.15] 3.6 [0.14] 0.55 [0.02] Ø 0.55 [0.02] ECN0870-G Inner Conductor Coupling Type Part No. A, C, F 3-1393670-9 Right-Angle PC Board Mount Bulkhead Jack 7.3 [0.29] Ø 1.0 [0.04] Recommended Mounting Holes Pitch 2.54 [0.10] 15.00 [.591] 5.28 [.208]4 Plcs. Center Contact Compliant Pin 4 Plcs. 6.10 [.240] 5.20 [.205] Coupling Type Part No. C, F 6274431-1 Vertical PC Board Mount ACTION PIN Jack 5.08 [.200] 5.08 [.200] Ø 1.47 ± 0.08 [.058 ± .003] 4 Plcs. Ø 1.00 ± 0.08 [.039 ± .003] Recommended Mounting Holes 10.37 ± 0.08 [.408 ± .003] 3.05 [.120] M5.5 x 0.5 Thread 3.18 ± 0.05 [.125 ± .002] 2.79 ± 0.25 [.110 ± .010] Ø 5.52 ± 0.038 [.217 ± .001] Over Knurl Ø 1.27 ± 0.013 [.050 ± .0005] Ø 7.62 ± 0.05 [.300 ± .002] Coupling Type Part No. A, C, F 1274449-1 Panel Mount, Press-in, Launcher Jack 23.35 [.919] Recommended Mounting Holes 13.35 [.526] 5.08 [.200] 5.08 [.200] 6.00 [.236] 6.45 [.254] M5.5 x 0.5 Ø 9.00 [.354] Ø 1.00 [.039] 5 Plcs. Coupling Type Part No. A, C, F 619107-1 12.95 ± 0.08 [.510 ± .003] Ø 2.59 ± 0.06 [.102 ± .002] M5.5 x 0.5 Thread 4 Plcs. 12.70 [.500] Sq.17.91 [.705] 14.99 [.590] 1.65 [.065] Ø 1.27 ± 0.03 [.050 ± .001] 8.64 [.340]4.32 [.170] Coupling Type Part No. A, C, F 1274520-1 Panel Mount, 4-Hole Flange, Launcher Jack 12.10 [.476] 0.80 [.032] M5.5 x 0.5 Thread 18.00 ± 0.50 [.710 ± .020] 15.00 ± 0.25 [.591 ± .010] Ø 4.06 [.160] Ø 1.27 [.050] 5.00 [.197] Coupling Type Part No. A, C, F 1274594-1 Front Mount, Bulkhead Jack RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.0/2.3, 50 Ohm (Continued) Series 1.0/2.3, 75 Ohm Right-Angle PC Board Mount Bulkhead Jack 20.54 ± 0.15 [.809 ± .006] 17.04 ± 0.15 [.671 ± .006] 7.40 [.291] 1.15 [.045] Ø 7.34 [.289] Min. 3.70 [.146] 3.00 [.118] 5.63 [.222] 6.45 [.254] Coupling Type Part No. A, C, F 1274544-1 A, C, F 1460060-1 18.0 [0.71] Ø 6.5 [0.26] Cable Coupling Type Ø Max. Part No. RG 179 A 2.67 5-1393670-50.105 Plugs, Solder/Crimp 1) Detent for jack [1.02] Ø 7.9 [0.03] Cable Coupling Type Ø Max. Part No. RG 179 F 2.67 6-1393670-20.105 ST 212 F 3.2 6-1393670-50.13 02Y(St)CY F 3.6 6-1393670-40.45/2.0 0.14 Part Number 1274544-1 19.40 ± 0.15 [.764 ± .006] 15.90 ± 0.15 [.626 ± .006] 7.00 [.276] Ø 6.00 [.236] 3.70 [.146] 3.00 [.118] 11.40 [.449] 6.45 [.254] Part Number 1460060-1 15.90 [.626] 3.60 [.142] 0.55 [.022] 7.00 [.276] 3.70 [.146] 3.30 [.130] M5.5 x 0.5 Coupling Type Part No. A, C, F 1460139-1 Recommended Mounting Holes Pitch 2.54 [0.10] Ø 1.0 [0.04] Plating Outer Body — Silver Outer and Center Conductor — Gold 7.3 [0.29] Ø 1.0 [0.04] Recommended Mounting Holes Pitch 2.54 [0.10] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Series 1.0/2.3, 75 Ohm (Continued) RF Coax Connectors Ø 4.1 [0.16] 13.5 [0.53] 12.0 [0.47] 0.6 1.5 Ø 6.6 [0.26] ECN0857-P Mounting Panel Cable Coupling Type Ø Max. Part No. RG 179 A, C, F 2.67 8-1393670-00.105 Bulkhead Jack, Solder/Crimp 22.5 [0.89]4.1 [0.16] 15.7 [0.62] Ø 7.9 [0.31] Ø 6.5 [0.26] Cable Coupling Type Ø Max. Part No. RG 179 F 2.67 2-1393670-60.105 02Y(St)CY F 3.6 7-1393670-00.45/2.0 0.14 Right-Angle Plug, Solder/Crimp 29.70 [1.169] Ø 4.45 ± 0.05 [.175 ± .002] Ref. 26.00 [1.024] 7.80 [.307] Ref. Ø 0.64 ± 0.010 [.025 ± .0004] Cable Coupling Type Ø Max. Part No. BELDEN A, C, F 2.67 619226-11855A 0.105 Straight Plugs, Solder/Crimp 37.00 [1.457] 7.60 [.299] Max. 12.00 [.472] Max. 1.00 ± 0.10 [.213] Ø 7.30 [.287] Ø 2.10 [.083]Ref. Plane 7.85 [.309] Cable Coupling Type Ø Max. Part No. BT 3002 A, C, F 2.67 1460815-10.105 23.00 [.906] Max. 16.00 [.630] Ref. Ø 8.30 [.327] Max. Cable Coupling Type Ø Max. Part No. RG 316 F 2.8 619228-10.110 23.00 [.906] 23.00 [.906] Max. Max. Ø 3.05 [.120] Ø 6.10 [.240] Ø 7.90 [.311] Max. Cable Coupling Type Ø Max. Part No. RA 7000 A, C, F 2.67 1460817-10.105 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.0/2.3, 75 Ohm (Continued) Ø 0.9 [0.04] 0.95 [0.04] 5.08 [0.2] 12.0 [0.48] 21.0 [0.83] 17.5 [0.69] 0.5 [0.02] M5.5x0.5 [0.22]x[0.02]6.0 [0.24] Ø 7.3 [0.29] Coupling Type Part No. A, C, F 8-1393670-3 Vertical PC Board Mount Bulkhead Jack Recommended Mounting Holes Pitch 2.54 [0.10] Ø 1.5 [0.06] 23.35 [.919] Recommended Mounting Holes 13.35 [.526] 5.08 [.200] 5.08 [.200] 6.00 [.236] 6.45 [.254] M5.5 x 0.5 Ø 9.00 [.354] Ø 1.00 [.039] 5 Plcs. Coupling Type Part No. A, C, F 619106-1 Vertical PC Board Mount Bulkhead Jack 16.8 [0.66] Ø 4.1 [0.16]13.4 [0.53] 3.6 [0.14] 12.7 [0.5] Ø 7.3 [0.29] Cable Coupling Type Ø Max. Part No. RG 179, 316 A, C, F 2.67 3-1393670-20.105 Right-Angle Bulkhead Jack, Solder/Crimp PC Board Mount Bulkhead Jack 22.30 [.878] 0.50 [.020] 4.80 ± 0.12 [.189 ± .005] 12.00 [.472] 5.80 [.228] Min. 6.50 [.256] 2.30 [.091] 0.20 [.008] Min. Sq. Ø 7.30 [.287] M5.5 x 0.5 [.020] 5.08 [.200] 3.00 [.118] 0.95 [.037] Ø 0.90 [.035] Coupling Type Ø Max. Part No. Recommended Mounting Holes Pitch 2.54 [0.10] Ø 1.5 [0.06] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Series 1.0/2.3, 75 Ohm (Continued) RF Coax Connectors Accessories for 50 Ohm and 75 Ohm 0.8 [0.03]2.1 [0.08] 5.0 [0.20] 2.4 [0.09] 4.8 [0.19] 3.5 [0.14] Part No. 2-1393562-2 For cable size similar to RG 179 and RG 316 Soldering aid (sleeve) for jack 1393670-8 with solder connection. ECN0900-7 + 0.00 – 0.50 + .000 – 0.02 3.5 [0.14 ] + 0.00 – 0.50 + .000 – 0.02 5.5 [0.22 ]+ 0.00 – 0.50 + .000 – 0.02 8.5 [0.33 ] Installation example: ECN0901-FSleeve Pushed onto Shielding Braid Tin-Soldered No. of Ports Coupling Type Part No.

2 A, C, F 1274714-3

3 A, C, F 1274714-2

4 A, C, F 1274714-1

Straight PCB Jacks, Multi-Port 19.00 [.748] 23.10 [.307] 4.00 [.157] 11.00 [.433] 2 Plcs. 8.00 [.315] 5.00 [.197] 10.00 [.394] 6.00 [.236] 10.00 [.394] 29.00 [1.142] 23.10 [.307] 4.00 [.157] 11.00 [.433] 3 Plcs. 8.00 [.315] 15.00 [.591] 10.00 [.394] 6.00 [.236] 20.00 [.787] 39.00 [1.535] 23.10 [.307] 4.00 [.157] 11.00 [.433] 4 Plcs. 8.00 [.315] 15.00 [.591] 10.00 [.394] 6.00 [.236] Part Number 1274714-3 Part Number 1274714-2 Part Number 1274714-1 5.00 [.197] Typ. 10.00 [.394] Typ. Ø 2.20 [.087] 4 Plcs. 1.80 [.071] 4.20 ± 0.05 [.165 ± .002] 8.00 ± 0.05 [.315 ± .002] 2 Plcs. 4 Plcs. Ø 1.53 [.060] R 0.765 [.030] 2 Plcs. Recommended PC Board Layout

2 Positions Shown

10.00 [.394] Typ. Note:F or more accessories, see page 147. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) General The Series 1.6/5.6 mS con- nectors have been modified to incorporate improved technical advantages. Transmission values have been greatly improved while maintaining the proven positive characteris- tics of the previous genera- tions. All types of this new “third generation” Series 1.6/5.6 mS connectors are connection-compatible with their predecessor. Today’s PCM technology demands place the Series 1.6/5.6 mS connectors as a most suitable component for transmission of high bit rates. Connectors are available in straight and angled ver- sions as well as with differ- ent mechanisms for screw (type A), snap-on (type B), slide-in (type C), and latch- ing (type F) coupling. All connectors of different cou- pling mechanisms are com- patible with each other. The connectors are designed according to the pin-socket principle. The contacts are partially gold- plated, ensuring long serv- ice life and stable contact resistance for a high num- ber of intermateability cycles. The inner conductor parts are secured so that they cannot be displaced. The insulating parts are made of PEEK (polyetheretherke- tone) or PC (polycarbonate). the scope of delivery. The connectors are character- ized by high mechanical strength and low space requirement. Connection possibilities exist for a number of differ- ent cables, including highly-flexible cable types (with foam insulation) with low attenuation or small diameter. Terminations and adapters (see also meas- urement accessories) round out the spectrum. The cable inner conductors are soldered on, while the outer conductors are screwed or crimped on. Also, cable clamp which is independent of the braid clamping secures the con- nection point against tensile stressing for both methods of connection. In addition, assembly- friendly connectors with full crimp and IDC (Insulation Displacement Contact) con- nection are included within 9.2 [0.36] M9x0.5 [0.35]x[0.02] Ø 5.6 [0.22] Ø 1.0 [0.03]4.1 [0.16] 5.5 [0.22] 6.5 [0.26] 9.7 [0.38] M9x0.5 [0.35]x[0.02] 6.7 [0.26] Ø 8.25 [0.32] Ø 2.5 [0.10] Ø 6.6 [0.26] 0.25 [0.01] 7.0 [0.28] Plug Jack ECN0934-R Between Series Adapters For Series 1.6/5.6 Adapters please see pages 253-262.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Technical data Electrical and mechanical characteristics in accordance with CECC 22240 Characteristic impedance — 75 Ω Frequency range — up to 8 GHz Reflection factor1, referred to — flexible cables, straight types — up to 1 GHz, r ≤ 0.02 up to 4 GHz, r ≤ 0.06 up to 8 GHz, r ≤ 0.10 flexible cables, angled types — up to 1 GHz, r ≤ 0.04 up to 2 GHz, r ≤ 0.06 up to 4 GHz, r ≤ 0.10 Insulation resistance — initial value, ≥ 10 GΩ after stressing, ≥ 1 GΩ Screening effectiveness — (straight screw connector at 1 GHz) ≥ 100 dB Inner conductor contact resistance — after stressing ≤ 8 mΩ Outer conductor continuity — after stressing ≤ 4 mΩ Voltage proof2 — flexible cables (RG 59) — at sea level, 1.5 kV, 50 Hz at 20 km altitude, 300 V, 50 Hz Working voltage 2 — flexible cables (RG 59) — at sea level, 500 V, 50 Hz at 20 km altitude, 125 V, 50 Hz Service life — 500 cycles Climactic category — 40/85/21 Notes:

1 Guideline values, depending on

cable type and connector style.

2 Some cable types suitable for use

with these connectors have lower characteristic values than specified here.

3 For applicable cable types see

page 151. Coupling Types Type A Screw coupling; version with union nut This type permits the plug and jack to be screwed together manually by means of a union nut secured to the plug manually, thus pre- venting the coupling from being pulled apart. This is necessary for readily acces- sible locations, front panel test points and cable con- nections. Type B Snap-on coupling (push-pull) Connectors of this type offer fast make/break. They can be used for test and mainte- nance applications and also if there is lack of space and connectors with screw cou- pling cannot be used. Type C Slide-in coupling; version with centering ferrule In this type of coupling, the plug features a guide ferrule with a conical entry surface. This ensures that the float- able bulkhead plugs with cable connection make a reliable electrical connec- tion to the rigid installed jack. Examples of this are single and multi-contact connections of slide-in applications. “W” denotes the allowed spacing of the mounting panel for satisfac- tory contact when the con- nection is made. Type F Latching coupling (Quick Lock) In this version, the cable plugs bear a funnel ferrule with built-in spring which snaps into a groove on the jack, simultaneously locking the connection. The connec- tion can be easily separated by lightly pulling the outer sleeve of the plug. This type of coupling provides the same amount of axial tensile strength as the screw cou- pling, but can be used with a higher packing density.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Ø 10.8 [0.43] 37.0 [1.46] Ø 10.8 [0.43] Cable Coupling Type Ø Max. Part No. 2YCCY A 7.8 1393682-10.7/4.4 0.31 Plugs, Solder/Clamp Plugs, Solder/Crimp Ø 12.8 [0.50] 37.0 [1.46] Ø 10.8 [0.43] Cable Coupling Type Ø Max. Part No. Ø 10.8 [0.43] Ø 11.5 [0.45] 30.2 [1.19] Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 F 3.6 1393681-80.14 Ø 10.8 [0.43] a Ø 10.8 [0.43] Cable Coupling Dim. Ø Max. Part No.Type a 2YCCY 0.4/2.5 A 30.7 4.8 1.21 0.19 1-1393682-2 2YC(mS)CY 0.4/2.5 A 30.7 5.0 1.21 0.20 2YCY 0.7/4.4 A 32.9 6.1 1.30 0.24 RG 59 A 32.9 6.25 1-1393682-31.30 0.25 2YC(mS)CY 0.5/3.0 A 32.9 6.2 1.30 0.24 Ø 10.8 [0.43] Ø 10.8 [0.43] a Cable Coupling Dim. Ø Max. Part No.Type a RG 179 A 32.5 2.6 1393680-21.28 0.105 2YCCY 0.4/2.5 A 32.5 4.8 1.28 0.19 1393680-3 2YC(mS)CY 0.4/2.5 A 35.5 5.0 1.40 0.20 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Ø 10.8 [0.43] Ø 11.5 [0.45] 32.0 [1.26] Version with Preassembled Insulation Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 F 3.6 1393672-30.14 Ø 10.8 [0.43] Ø 11.5 [0.45] 32.0 [1.26] Preassembled Isolation Parts Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 F 3.6 1393672-90.14 35.00 [1.378] Ø 11.80 [.465] Ø 3.80 [.150] Ø 1.30 [.051] Min. Preassembled Version Cable Coupling Type Ø Max. Part No. 02YS(St)CHH 0.25/1.2 F 2.9 1460132-10.11 Series 1.6/5.6 mS (75 Ohm) Plugs, Solder/Crimp (Continued) 24.7 [0.97] Ø 10.8 [0.43] Ø 10.8 [0.43] 18.2 [0.72] Cable Coupling Type Ø Max. Part No. RG 179 A 2.67 2-1393682-30.105 24.2 [0.95] Ø 11.5 [0.45] Ø 10.8 [0.43] 13.0 [0.51] Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 F 3.6 1-1393681-00.14 Right-Angle Plugs, Solder/Crimp 24.7 [0.97] Ø 10.8 [0.43] a Ø 10.8 [0.43] Cable Coupling Dim. Ø Max. Part No.Type a 2YCCY 0.4/2.5 A 13.0 4.8 0.51 0.19 2-1393682-0 2YC(mS)CY 0.4/2.5 A 13.0 5.0 0.51 0.20 2YCY 0.7/4.4 A 15.8 6.1 0.62 0.24 RG 59 A 15.8 6.25 2-1393682-20.62 0.25 2YC(mS)CY 0.5/3.0 A 15.8 6.2 0.62 0.24 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Right-Angle Plugs, Solder/Crimp 24.7 [0.97] Ø 10.8 [0.43] a Cable Coupling Dim. Ø Max. Part No.Type a Right-Angle Plugs, IDC Connection 24.7 [0.97] IDC Connection 17.5 [0.69] Ø 10.8 [0.43] ECN1615-7 Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 A 3.6 1393757-90.14 2YCY 0.4/2.5 A 4.1 1393757-80.16 Right-Angle Plug, Solder/Crimp 25.0 [0.98] ECN0976-2 15.0 [0.59] Ø 11.5 [0.45] Crimp Connection Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 F 3.6 1393672-50.14 Bulkhead Jacks, Solder/Clamp Ø 10.8 [0.43] Ø 10.8 [0.43] a M9.0x0.5 [0.35]x[0.02] Ø 8.2 [0.32] Mounting Panel 14.3 [0.56] Max. 2.0 [0.08] Max. Cable Coupling Dim. Ø Max. Part No.Type a 2YCCY 0.4/2.5 A, B, F 28.1 4.8 1.11 0.19 3-1393682-3 2YC(mS)CY 0.4/2.5 A, B, F 28.1 5.0 1.11 0.20 2YCY 0.7/4.4 A, B, F 30.4 6.1 1.20 0.24 RG 59 A, B, F 30.4 6.25 3-1393682-51.20 0.25 2YC(mS)CY 0.5/3.0 A, B, F 30.4 6.2 1.20 0.24 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Ø 10.8 [0.43] Ø 10.8 [0.43] 32.5 [1.28] M9.0x0.5 [0.35]x[0.02] Ø 8.2 [0.32] 10.6 [0.42]2.5 [0.10] Max. Mounting Panel Cable Coupling Type Ø Max. Part No. RG 179 B, C, F 2.67 4-1393682-20.105 12.0 [0.47] 8.0 [0.31] Ø 10.8 [0.43] Ø 8.2 [0.32] Ø 0.6 [0.02] Mounting Panel 19.4 [0.76] 6.5 [0.26] 3.0 [0.12] Max. ECN0984-S M9.0x0.5 [0.35]x[0.02] Coupling Part Type No. A, B, C, F 1-1393681-3 Ø 12.8 [0.50] Ø 10.8 [0.43] 34.5 [1.36] M9.0x0.5 [0.35]x[0.02] Ø 8.2 [0.32] 14.3 [0.56] Max. 2.0 [0.08] Max. Mounting Panel ECN0944-Y Cable Coupling Type Ø Max. Part No. 2YCCY 1.0/6.5 A, B, F 9.8 0.38 1393682-4 2YC(mS)CY 1.0/6.5 A, B, F 9.8 0.38 a 12.0 [0.47] 1.7 [0.07] Ø 10.8 [0.43] Ø 8.2 [0.32] ECN0982-B Mounting Panel 19.4 [0.76] 3.0 [0.12] Max. M9.0x0.5 [0.35]x[0.02] Dim. a Ø Max. Part No. 22.3* A, B, C, F 1-1393681-10.88 23.5 A, B, C, F 1-1393681-90.93 *Without soldering tags on outer conductor, dimension a up to inner conductor end. Bulkhead Jacks, Solder/Clamp (Continued) Bulkhead Jacks, Solder/Crimp Ø 10.8 [0.43] Ø 10.8 [0.43] 29.8 [1.17] M9.0x0.5 [0.35]x[0.02] Ø 8.2 [0.32] 14.3 [0.56] Max. 2.0 [0.08] Max. Mounting Panel ECN0947 N Cable Coupling Type Ø Max. Part No. RG 179 A, B, F 2.67 2-1393680-20.105 02Y12YC(mS)C6Y A, B, F 4.0 2-1393680-40.45/2.0 0.16 06YCC(St)6Y 0.4/1.6 A, B, F 3.3 2-1393680-50.13 02Y(St)CY 0.45/2.0 A, B, F 3.6 0-1393672-60.14 With preassembled insulation parts Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 A, B, F 3.6 0-1-1393672-40.14 Bulkhead Jacks, Solder Ø 10.8 [0.43] Ø 10.8 [0.43] 29.8 [1.17] M9.0x0.5 [0.35]x[0.02] Ø 8.2 [0.32] 2.0 [0.08] Max. Mounting Panel Crimp Connection Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) 21.0 [0.83] Ø 12.8 [0.50] Ø 10.8 [0.43] Ø 8.2 [0.32] Mounting Panel 13.8 [0.54] 28.4 [1.12] 2.0 [0.08] Max. ECN0966-U M9.0x0.5 [0.35]x[0.02] Cable Coupling Type Ø Max. Part No. 2YCCY 1.0/6.5 A, B, F 9.8 0.39 1393682-8 2YC(mS)CY 1.0/6.5 A, B, F 9.8 0.39 Right-Angle Bulkhead Jack, Solder/Clamp Right-Angle Bulkhead Jack, Solder/Crimp a Ø 10.8 [0.43] Ø 10.8 [0.43] Ø 8.2 [0.32] Mounting Panel 12.6 [0.50] 27.2 [1.07] 2.0 [0.08] Max. ECN0967-3 M9.0x0.5 [0.35]x[0.02] Cable Coupling Dim. Ø Max. Part No.Type a 2YCCY 0.4/2.5 A, B, F 13.0 4.8 0.51 0.19 4-1393682-6 2YC(mS)CY 0.4/2.5 A, B, F 13.0 5.0 0.51 0.20 2YCY 0.7/4.4 A, B, F 15.8 6.1 0.62 0.24 RG 59 A, B, F 15.8 6.25 4-1393682-80.62 0.25 2YC(mS)CY 0.5/3.0 A, B, F 15.8 6.2 0.62 0.24 a Ø 10.8 [0.43] Ø 8.2 [0.32] Mounting Panel 12.6 [0.50] 27.2 [1.07] 2.0 [0.08] Max. ECN0969-J M9.0x0.5 [0.35]x[0.02] Cable Coupling Dim. Ø Max. Part No.Type a RG 179 A, B, F 15.0 2.67 3-1393680-00.59 0.105 2YCCY 0.4/2.5 A, B, F 15.0 4.8 0.59 0.19 3-1393680-2 2YC(mS)CY 0.4/2.5 A, B, F 15.0 5.0 0.59 0.20 27.2 [1.07] Max. Ø 10.8 [.43] Ø 8.2 [.32] M9 x 0.5 [.35 x .02] a 1.35 [.053] Min. 3.80 [.150] Cable Coupling Dim. Ø Max. Part No.Type a * Tray Packaging. ** Individual Packaging. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Right-Angle Bulkhead Jack, IDC Connection Vertical PC Board Mount Jack PC Board Mount Bulkhead Jack Ø 10.8 [0.43] Ø 8.2 [0.32] ECN1614-Y Mounting Panel 12.6 [0.50] 17.5 [0.69] 27.2 [1.07] 2.0 [0.08] Max. M9.0x0.5 [0.35]x[0.02] Cable Coupling Type Ø Max. Part No. 02Y(St)CY 0.45/2.0 A, B, F 3.6 1-1393757-60.14 Ø 8.2 [0.32] Ø 9.0 [0.35] Ø 0.8 [0.03] 14.4 [0.57] 4.2 [0.17] 1.0 [0.04] 0.8 [0.03] 29.2 [1.15] ECN0986-9 M9.0x0.5 [0.35]x[0.02] Ø 1.3 [0.05] 10.0 [0.39] 10.8 [0.43] 5.08 [0.20] 5.08 [0.20] Pitch 2.54 [0.10] Coupling Type Part No. A, B, F 1-1393681-6 Recommended Mounting HolesView A Recommended Mounting Holes Ø 8.2 [0.32]a b c M9.0x0.5 [0.35]x[0.02] 10.8 [0.43] 10.0 [0.39] 5.08 [0.20] 5.08 [0.20] Inner- and outer conductor, press-fit Coupling Type Dim. a Dim. b Dim. c Part No. + 0.09 – 0.06 + 0.004 – 0.002 Ø 1.0 [0.04 ] 5 Plcs. Pitch 2.54 [0.10] Thickness 1.5 [0.06] Max. Recommended Mounting Holes Ø 7.00 [.276] Ø 1.00 [.039] Center Contact 23.20 [.913] Ø 9.00 [.354] Ø 10.80 [.425] 4.50 [.177] 7.05 ± 0.05 [.278 ± .002] M9 x 0.5-6g Thread 3.00 ± 0.13 [.118 ± .005] Center Contact 2.00 [.079] 3.00 [.118] 6.50 [.256] Typ. Coupling Type Part No. A, B, F 1274513-1 Ø 1.20 [.047] Ø 1.50 [.059] 4 Plcs. 5.60 [.220] 5.60 [.220] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Right-Angle PC Board Mount Bulkhead Jack Ø 8.2 [0.32] a b c M9.0x0.5 [0.35]x[0.02] d 4.5 [0.18] *With positioning and snap-on system onto PC board Ø 1.3 [0.05]Ø e 4 Plcs. Pitch 2.54 [0.10] Recommended Mounting Holes Ø 10.8 [0.43] 24.4 [0.96] b a Ø 10.8 [0.43] 22.3 [0.88] b a A 15.0 26.5 6-1460823-10.59 1.04 B 15.0 26.5 6-1460823-20.59 1.04 U-link Plug/Plug Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Series 1.6/5.6 mS (75 Ohm) (Continued) Plug 1.6/5.6 to Jack 1.0/2.3 Coupling Part Type No. A, F2 2-1393670-2/H12135 A, F2 6-1460821-2

2 Only jack side

Plug 1.6/5.6 to Plug 1.0/2.3 Coupling Part Type No. A 6-1460821-1 Between Series Adapters (75 Ohm) Ø 10.8 [0.43] 28.0 [1.10] 9.2 [0.36] 8.9 [0.35] Ø 6.5 [0.26] 1) 1) Ø 10.8 [0.43] 33.0 [1.30] 9.2 [0.36] Ø 4.1 [0.16] 147 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors 2.3 [0.09] M9.0x0.5 [0.35]x[0.02] Ø 10.8 [0.43] Threaded ring for installation of bulkhead jacks Accessories Soldering aid (sleeve) for jack (1-1393681-9) with solder termination Part No. 2-1393562-2 Cable stripping and installation example: see Part number 2-1393562-2 under “Series 1.0/2.3”, page 137. 0.8 [0.03]2.1 [0.08] 5.0 [0.20] 2.4 [0.09] 4.8 [0.19] 3.5 [0.14] Part No. 1-1393562-0 These components are pro- vided when bulkhead jack part numbers are ordered, but can also be ordered separately. 1) Detent for jack Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Measurement Accessories (Continued) Between Series Adapters (75 Ohm) (Continued) BNC Plug to Jack 1.6/5.6 Part No. 7-1393665-6 BNC Plug to Plug 1.6/5.6 Part No. 7-1393665-4 Ø 14.5 [0.57] 46.4 [1.83] Ø 10.8 [0.43] ECN1669-6 Ø 14.5 [0.57] 44.3 [1.74] Ø 8.2 [0.32] ECN1670-9 Plug 1.0/2.3 to Jack 1.6/5.6 Coupling Part Type No. A, B2, F2 6-1460821-3 Ø 6.5 [0.26] 34.5 [1.36] 8.9 [0.35] Ø 8.2 [0.32] Ø 10.8 [0.43] 1) Detent for jack Jack 1.0/2.3 to Jack 1.6/5.6 Coupling Part Type No. A, B, F 6-1460821-4 Ø 4.1 [0.16] 39.4 [1.55] Ø 8.2 [0.32] Ø 10.8 [0.43] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Measurement Accessories (Continued) Termination (75 Ohm) Plug 1.6/5.6 Coupling Power Part Type W No. A 1.0 6-1393665-1 Jack 1.0/2.3 Coupling Power Part Type W No. A, F 0.6 7-1393665-3 Standard Termination Plug 1.0/2.3 Coupling Power Part Type W No. A 0.6 7-1393665-2 15.0 [0.59] Ø 6.5 [0.26] 8.9 [0.35] 23.1 [0.91] Ø 4.1 [0.16] Ø 6.5 [0.26] 29.6 [1.17] Ø 10.8 [0.43] 1) Detent for jack Between Series Adapters (75 Ohm) (Continued) BNC Jack to Plug 1.6/5.6 Part No. 7-1393665-7 BNC Jack to Jack 1.6/5.6 Part No. 7-1393665-5 Ø 9.6 [0.38] 45.4 [1.79] Ø 10.8 [0.43] Ø 11.0 [0.43] Ø 14.5 [0.57] ECN1671-H Ø 9.6 [0.38] 45.4 [1.79] Ø 8.2 [0.32] Ø 11.0 [0.43] Ø 14.5 [0.57] M9.0x0.5 [0.35]x[0.02] ECN1672-Q Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Measurement Accessories (Continued) In-Series Adapter (75 Ohm) Adapter 1.6/5.6, Jack/Jack Coupling Part Type No. A, B, F 1-1393665-1 Note: U-link connectors see “1.6/5.6” section, page 146. Adapter 1.6/5.6, Plug/Jack Coupling Part Type No. *Jack side only Adapter 1.6/5.6, Plug/Plug Coupling Part Type No. A 1393681-643.8 [1.73] Ø 10.8 [0.43] 41.3 [1.63] Ø 8.2 [0.32] M9.0x0.5 [0.35]x[0.02] Ø 10.8 [0.43] 28.4 [1.12] Ø 8.2 [0.32] M9.0x0.5 [0.35]x[0.02] 14.3 [0.56] Ø 10.8 [0.43] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

List of the coaxial cables that are listed in the various connector series of this section. Cable-Type DesignationCharacteristic Max. Cable Dielectric Diameter (mm)/ VDE Designation2) US Designation IEC DesignationImpedance (Ω) Outer Diameter (mm) Material 1) Manufacturer des. 96-IEC 50 1.9 0.91max/PTFE 5YC5Y e 0.3/0.86 RG 178 50-1-1 50 2.1 0.87/PTFE — RG 196 50-1-2 50 2.25 1.71max/PTFE 5YK 0.51/1.68 RG 405 — 50 2.6 1.60max/PTFE 5YC5Y e 0.5/1.5 RG 316 50-2-1 50 2.8 1.60max/PE 2YCY 0.5/1.5 RG 174 — 50 3.0 1.52/PTFE 5YCC5Y 0.5/1.5 RD 316 — 50 3.6 3.01max/PTFE 5YK 0.9/3.0 RG 402 — 50 6.4 5.38max/PTFE 5YK 1.63/5.33 RG 401 — 75 2.67 1.68max/PTFE 5YC6Y 0.3/1.6 RG 179 75-2-1 75 3.0 1.60max/PTFE — RD 179 — 75 3.3 1.68max/Cell-FEP 06YCC(St)6Y 0.4/1.6 — — 75 3.2 2.1max — ST 212 — 75 3.6 2.0max/Cell-PE 02Y(St)CY 0.45/2.0 — — 75 4.0 2.0maxE/Cell-PE 02Y12YC(mS)C6Y 0.45/2.0 — — 75 4.0 2.54max/PE 2YCY 0.4/2.5 — — 75 4.8 2.54max/PE 2YCCY 0.4/2.5 — — 75 5.0 2.54max/PE 2YC(mS)CY 0.4/2.5 — — 75 6.1 4.25max/PE 2YCY 0.7/4.4 — — 75 6.2 2.83max/PE 2YC(mS)CY 0.5/3.0 — — 75 6.25 3.8max/PE 2YCY 0.58/3.7 RG 59 — 75 7.8 4.43max/PE 2YCCY 0.7/4.4 — — 1) Material label PTFE Polytetrafluorethylene PE Polyethylene FEP Perfluorethylene propylene PFA Perfluoralkoxy copolymer 2) Mounting label of the VDE type numbers (from inside to outside) Example: 6Y C (mS) C Y 0.7/4.0 -75 (r2/100) vs gr Dielectric 1st screen Intermediate layer 2nd screen Outer jacket Diameter inner conductor/dielectric Characteristic impedance Max. reflection (r) in % / frequency in MHz Specifications on inner conductor and/or jacket color Explanation Dielectric and Jacket 2Y = PE 5Y = PTFE 02Y = Cell PE 06Y = Cell FEP 6Y = FEP Screen: C = Cu braiding K = Cu tape Intermediate layer: mS = magnetic screen St = static screen Specifications on inner conductor: vs = silver plated staku = Bare copper-clad steel wire conductor Jacket color: gn = green gr = grey rt = red ws = white 151 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors Product Facts ■ Intermateable with Corning Gilbert GPO Series Connector ■ DESC approved ■ Enhanced performance

features

■ Simplified Assembly SMP microminiature push-on coaxial connectors provide solutions for today’s modu- lar designs with denser packaging requirements. The extremely small size of the SMP offers a versatile solution for high density packaging allowing connector center-to-center spacing of 4.32 [0.17]. The push-on interface facilitates easier assembly and test with a positive snap-in fea- ture to indicate a fully mated connection. The rugged SMP interface can withstand harsh environ- ments of mechanical shock and vibration, typically found in military or aero- space related applications. This SMP connector inter- face is the standard used by Defense Electronics Supply Center (DESC) to generate the SMP push-on connector series. SMP connectors can be your design solution for mechanical packaging and frequency response. The SMP interface provides 0.020" of radial misalign- ment for critical blindmate applications. Mating forces are strictly controlled to ensure reliable connections per mated pair or when simultaneously mating mul- tiple connectors. Cable jacks include an anti-rock- ing ring to ensure reliable mechanical performance regardless of the operating environment. SMP connec- tors offer enhanced broad- band VSWR performance of 1.15:1 max thru 26GHz and 1.40:1 max thru 40GHz. Standard design SMP configurations include cable connectors, straight and right-angle, for 0.047 and 0.085 semi-rigid cable, full detent, limited detent and smooth bore mating shrouds that can be bulk- head or flange mounted and glass feedthroughs for coax to circuit launchers. In-series adapters for mod- ule to module intermating and between series adapters for integrating or testing systems or components parameters. SMP Shroud and Jack to Jack Adapter Assembly Typical VSWR for SMP Jack to Jack Adapter Part Numbers 1056700-1 and 1056721-1 1.50:1 1.40:1 1.30:1 1.20:1 1.10:1 VSWR Between Series Adapters For SMP Between Series Adapters, see pages 253-262. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.GPO is a trademark of Corning Gilbert, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) General Materials and Finishes Housings and Center Contacts Beryllium Copper per ASTM-B-196; gold plate over nickel plate Dielectric PTFE Fluorocarbon per ASTM-D-1457 Shrouds Stainless steel per ASTM-A582 Type 303; passivate per ASTM-A380 Hermetic Seal Glass bead Electrical Frequency Range dc - 40.0 GHz VSWR 1.10:1 Maximum dc - 23.0 GHz 1.15:1 Maximum 23.0 - 26.0 GHz 1.40:1 Maximum 26.0 - 40.0 GHz Voltage Rating 335 Vrms maximum at sea level Insertion Loss 0.10 f √ (GHz) maximum Insulation Resistance 5000 megohms minimum Dielectric Withstanding Voltage 500 volts (VRMS minimum) RF High Potential 325 volts (VRMS minimum) @ 5 MHz Impedance 50 ohms nominal RF Leakage -80dB to 3 GHz, -65dB from 3 to 26.5 dB minimum Contact Resistance Initial center contact 6.0 milliohms maximum Outer contact 2.0 milliohms maximum Mechanical Durability 100 mating cycles minimum Radial Misalignment ±0.020 minimum Axial Misalignment .000/.010 Force to Engage full detent 15.0 lbs. maximum half detent 10.0 lbs. maximum smooth bore 2.0 lbs. maximum Force to Disengage full detent 5.0 lbs. minimum half detent 2.0 lbs. minimum smooth bore 0.5 lbs. minimum Center Contact Retention 1.5 lbs. minimum axial force Environmental Operating Temperature -65°C to +165°C Vibration per mil-std-202, method 204, test condition D Shock per mil-std-202, method 213, test condition I Thermal Shock per mil-std-202, method 107, test condition B Moisture Resistance per MIL-STD-202 method 106, except step 7b shall be omitted. Resistance shall be 200 megohms within 5 minutes after removal from humidity. Specifications Jack Note: The U.S. Government (DESC) has determined that the above specified interface dimensions are interchangeable and intermateble with Corning Gilbert GPO Series RF Connectors. 1 Per DESC drawing numbers 94007 and 94008, series SMP . 3.40 [.132] Min. 3.43 [.135] 3.20 ± .050 [.125 ± .002] 2.80 ± .050 [.110 ± .002] Dia. 2.8 [.112] Min. 8.60 ± .076 [.142 ± .003] Dia.Dia. Max. 3.43 [.135] Dia. Max. 3.70 [.145] Dia. Max. EMI Ring Anti-Rock Ring Full Detent Bullet Smooth Bore ShroudInterface Dimensions GPO is a trademark of Corning Gilbert, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) Straight Cable Jack, Solder Attachment 6.40 [.250] 3.40 [.135] Dia. Max. 3.40 [.133] Dia. EMI Ring Anti-Rock Ring Right-Angle Cable Jack, Solder Attachment 4.10 [.161] Max. 3.40 [.135] Dia. Max. 5.80 [.230] Max. Dim.B Dim.A EMI Ring Anti-Rock Ring Jack to Jack Adapter (Bullet) 6.40 / 6.50 [.2525 / .2555] 3.40 [.135] Dia. Max. 3.40 [.133] Dia. Cable Part No. .047 Semi-Rigid 1056526-1 .085 Semi-Rigid 1056527-1(RG 405) Cable Dim. A Dim. B Part No. Part No. 1056700-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) Shroud — Threaded 3.00 [.120] 4.10 [.160] Dia. Max. 3.00 [.120] 4.20 [.165] 1.10 [.045] Dim.D 2 Plcs. Dim.C Dim.B Dim.A Dim.A Dim.B Shroud — 2 Hole Flange Surface Mount Shroud — Press Fit 12.2 8.3 4.7 2.5 .480 .328 .187 .098 1056721-1 10.2 7.2 4.2 1.9 .400 .282 .165 .073 1056724-1 12.2 8.3 4.7 2.5 Limited Detent .480 .328 .187 .098 1056729-1 10.2 7.2 4.2 1.9 .400 .282 .165 .073 1056731-1 Description Part No. Full Detent 1056745-1 Limited Detent 1056743-1 Smooth Bore 1056744-1 Description Dim. A Dim. B Part No. Limited Detent 3.9 2.0 1056736-1.154 .080 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) Glass Bead Assembly Plug, Straight, Full Detent Shroud — Solder-In Hermetic .400 [.015] Dia. 1.60 [.063] 3.20 [.125] 2.50 [.099] 3.70 [.145] Dia. 2.50 [.098] 2.00 [.080] 3.60 [.140] 1.30 [.050] Dia. 0.40 [.015] Dia. Description Part No. Full Detent 1056750-1 Limited Detent 1056751-1 Smooth Bore 1056752-1 Part No. 1056728-1 4.20 [.164] 8.10 [.320] 9.10 [.358] 4.70 [.186] 2.20 [.085] 0.60 ± 0.10 [.024 ± .002] Dia. 0.50 ± 0.10 [.020 ± .002] Dia. M/A-COM Part Model Number No. 2965-5006-62 1061692-1 Plug, Right-Angle, Limited Detent 3.60 [.140] Ø 0.40 [.015] Ø 6.90 [.272] 4.60 [.182] 3.80 [.150] Sq. 5.10 [.200] Sq. 0.30 [.010] 1.80 [.072] OSMP Plug Full Detent Ref. Plane Ø 1.70 [.068] 4 Plcs. Ø 0.80 [.030] 4 Plcs. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 OSP Miniature Modular Blind Mate Connectors RF Coax Connectors Product Facts ■ Interface designed for multiple interconnects ■ For high performance microwave system requirements ■ Module to module, module to motherboard, fixed and float mount ■ Bulkhead or panel mount ■ For flexible and semi-rigid cable OSP miniature connectors for semi-rigid cable meet high performance require- ments for microwave multiple interconnects. Standard units are available in bulkhead or panel mount designs for either direct solder or solderless com- pression crimp attachment. Complete tooling for both versions is located in the Tooling Section of this catalog. Jack connectors are avail- able in either float or rigid mount. Rigid mount units will function to specifications up to ±.10 [.004] radial mis- alignment with the mating plug connector. Applications requiring greater than ±.10 [.004 ] radial misalignment can use either the float design or floating connector plates with guide pins. The solderless compression crimp attachment meets high performance require- ments for microwave sys- tem applications. The cable attachment is permanent and highly reliable. Ease of assembly permits users unskilled in soldering techniques to rapidly pro- duce cable assemblies with consistently excellent mechanical and electrical performance.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 OSP Miniature Modular Blind Mate Connectors (Continued) RF Coax Connectors Engineering Data Impedance — 50 ohms Frequency — dc to 22.0 GHz Temperature Rating — -65° to 125° C Electrical RG 402 (.141) Semi-Rigid RG 405 (.085) Semi-Rigid VSWR — RF Transmission Loss — .03 x √--f (GHz) .03 x √--f (GHz) Insulation Resistance — 5,000 megohms min. 5,000 megohms min. Contact Resistance — Center Contact 2.0 milliohms max. 2.0 milliohms max. Outer Contact 2.0 milliohms max. 2.0 milliohms max. Outer Contact to Cable 0.5 milliohms max. 0.5 milliohms max. Dielectric Withstanding Voltage — 1500 volts RMS 1000 volts RMS Corona Extinction Voltage at 70,000 Ft.— 375 volts min. 335 volts min. RF High Potential at 5 MHz — 1,000 volts RMS 670 volts RMS RF Leakage Interface Only — -(90-fGHz) dB min. (fully mated) -(90-fGHz) dB min. (fully mated) Power Handling — 300W at 3 GHz (sea level) and room temperature Environmental Corrosion — Method 101, Condition B, MIL-STD-202 Vibration — Method 204, Condition D, 20G’s, MIL-STD-202 Shock — Method 213, Condition I, 100G’s, MIL-STD-202 Temperature Cycling — Method 107, Condition B, MIL-STD-202 Moisture Resistance — Method 106, MIL-STD-202 Material Housing — Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582 Center Contact — Beryllium copper per ASTM-B-196 Dielectric — TFE fluorocarbon per ASTM-D-1457 Gasket (O’Ring) — MIL-P-25732 Mechanical Force to Engage — 3 pounds max. Force to Disengage — 1.5 pounds max. Center Contact Retention — 6 pounds min. Durablilty — 5,000 Cycles Radial Misalignment — Rigid Mount ±.10 [±. 004] Float Mount ±.51 [±.020] Mating Characteristics Jack Connector — Test Pin Finish — 16 micro inch Insertion Depth — .76/1.14 [.030/.045] Number of Insertions — 3 Test Pin Finish — 16 micro inch Insertion Depth — 1.27/1.91 [.050/.075] Insertion Force — 3 pounds max. Test Pin Finish — 16 micro inch Insertion Depth — 1.27/1.91 [.050/.075] Withdrawal — 1 ounce min. Finish Center Contact — Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550 Housing — Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 The specifications given refer specifically to mated pair of Part Numbers 1059410-1 and 1059402-1 (RG 402) and 1059412-1 and 1059404-1 (RG 405). Specifications on other con- nectors are available on request. The general electrical, mechanical and environ- mental specifications in the following table are recom- mended for procurement documents or drawings. All dimensions shown are nominal. Contact the factory for specific tolerances.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 OSP Miniature Modular Blind Mate Connectors (Continued) Interface Mating Dimensions RF Coax Connectors The connector interface, specifically designed for multiple interconnects, main- tains reliable performance over the typical mechanical tolerance required in cost effective packaging. The interface test data shows excellent perform- ance is maintained with mat- ing gaps up to 0.38 [.015]. Meets MIL-STD-348 Figure 321. Intermateable to BMA Connectors. Jack Plug Letter Dimensions A 1.78 .070 Nom. B 5.72 .225 Min. C 7.62 .300 Ref. D 5.00 .197 Nom.* E 5.08 .200 Max. F 3.23 .127 Max.* *With spring bottomed Letter Dimensions A 1.78 .070 Nom. B 5.33 .210 Nom. C 7.62 .300 Ref. D 5.05 .199 Min. E 0.91 .036 Nom. F 3.25 .128 Min.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment RF Coax Connectors Bulkhead Feedthrough Cable Plug Rear Mount A Dia. B Dia. Hex. 17.5 [.690] 7.9 [.312] Max. ed 9.19 [.362] Dia.6.1 ± 0.03 [.240 ± .001] + 0.03 – .000 + .001 ]– .000 6.1 [.242 Recommended Mounting Hole Dia. Flange Mount Cable Jack Floating Rear Mount B Dia. 18.0 [.710] OSP Jack 14.2 [.560] Dia.19.1 [.750] Dia. A Dia. + 0.25 – 0.00 + .010 – .000 9.5 [.375 ] + 0.10 – 0.03 + .004 – .001 2.6 [.102 ] Dia. 7.1 [.280] 9.5 [.372] 14.2 ± 0.10 [.560 ± .004] + 0.05 – 0.03 + .002 ]– .001 9.6 [.377 Recommended Mounting Hole Cable Dimensions Part No.AB RG 402/U 3.58 3.7 4.6 1059453-1 .141 .144 .180 RG 405/U 2.16 2.3 3.0 1059456-1 .085 .089 .120 Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Bulkhead Feedthrough Cable Jack Rigid Rear Mount A Dia. B Dia. Hex. 18.0 [.710] 11.1 [.437] Dia.6.4 [.250] Max.9.19 [.362] ed ole + 0.03 – .000 + .001 ]– .000 9.1 [.359 [.43 Dia. Recommended Mounting Hole Cable Plating Dimensions Part No.AB RG 402/U 3.58 Gold 3.7 4.6 1059410-1 .141 .144 .180 RG 405/U 2.16 Gold 2.3 3.0 1059412-1 .085 .089 .120 Cable Plating Dimensions Part No.AB RG 402/U 3.58 Gold 3.7 4.6 1059402-1 .141 .144 .180 RG 405/U 2.16 Gold 2.3 3.0 1059404-1 .085 .089 .120 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment (Continued) RF Coax Connectors Dia. 16.2 [.640] Dia.11.2 [.365 ± .001] A Dia. B Dia. Cable Plating Dimensions Part No.AB RG 402/U 3.58 Gold 3.7 4.6 1059505-1 .141 .144 .180 RG 405/U 2.16 Gold 2.3 3.0 1059506-1 .085 .089 .120 When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Low Profile — Panel Feedthrough Cable Jack — Floating Rear Mount A Dia. B Dia.18.0 [.710] Dia.7.6 [.300] Cable Plating Dimensions Part No.AB RG 402/U 3.58 Gold 3.7 4.6 1059465-1 .141 .144 .180 RG 405/U 2.16 Gold 2.3 3.0 1059467-1 .085 .089 .120 Recommended removal tool part number 1059774-1 is described in the Tooling Section of this catalog. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Panel A ±.003 Panel B ±.003 Stand-Off Panel C +.050/–.000 2.3 9.5 7.2 .090 .375 .285 2.3 11.1 5.6 .090 .438 .222 2.3 12.7 4.1 .090 .500 .160 3.2 9.5 6.4 .125 .375 .250 3.2 11.1 4.7 .125 .438 .187 3.2 12.7 3.2 .125 .500 .125 Low Profile — Bulkhead Feedthrough Cable Jack — Floating Rear Mount Recommended Mounting Detail Stand-Off C Panel A Panel B + 0.08 – 0.00 + .003 ]– .000 8.6 [.340 + 0.05 – 0.00 + .002 ]– .000 8.0 [.316 + 0.00 – 0.13 + .000 ]– .005 1.3 [.050Panel B Dia. 16.2 [.640] Dia.11.2 [.365 ± .001] A Dia. B Dia. Dia. + 0.05 – 0.03 + .002 ]– .001 9.4 [.368 Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Solderless Compression Crimp Attachment RF Coax Connectors Bulkhead Feedthrough Cable Plug Fixed Rear Mount Dia. Hex. Dia.B 7.9 [.312] 5.5 [.218] Max.9.19 [.362] 6.1 ± 0.03 [.240 ± .001] A Dia. d + 0.03 – .000 + .001 ]– .000 6.1 [.242 Dia. Recommended Mounting Hole Flange Mount Cable Jack Floating Rear Mount B Dia. 9.7 [.380] 14.2 [.560] Dia.9.5 [.372] Dia.5.5 [.218] Dia.19.1 [.750] Dia. 2 Plcs. 2.6 [.102] A Dia. Dia. 7.1 [.280] 9.5 [.372 14.2 ± 0.10 [.560 ± .004] + 0.05 – 0.03 + .002 ]– .001 9.6 [.377 Recommended Mounting Hole Bulkhead Feedthrough Cable Jack Fixed Rear Mount Hex. B 11.1 [.437] Dia.6.4 [.250] Dia.5.5 [.218] Max.12.7 [.500] A Dia. d + 0.03 – .000 + .001 ]– .000 9.1 [.359 [.43 Dia. Recommended Mounting Hole Dim. B Cable Plating Dim. A Before After Part No. Crimping Crimping RG 405/U Passivated 2.16 Stainless 2.2 19.8 17.2 1059399-1 .085 Steel .088 .782 .677 Outline drawing shows after crimp dimensions. Dim. B Cable Plating Dim. A Before After Part No. Crimping Crimping RG 402/U Passivated 3.58 Stainless 3.6 21.1 18.2 1059408-1 .141 Steel .143 .830 .715 Outline drawing shows after crimp dimensions. Dim. B Cable Plating Dim. A Before After Part No. Crimping Crimping RG 402/U Passivated 3.58 Stainless 3.6 22.6 19.8 1059451-1 .141 Steel .143 .891 .780 RG 405/U Passivated 2.16 Stainless 2.2 22.6 19.8 1059452-1 .085 Steel .088 .891 .780 Outline drawing shows after crimp dimensions. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 OSP Miniature Modular Blind Mate Connectors (Continued) For Flexible Cable, Crimp Attachment RF Coax Connectors Bulkhead Feedthrough Cable Plug Rear Mount Max.34.9 [1.375] Ref.21.2 [.833] 11.4 [.447] Dia.6.9 ± 0.03 [.240 ± .001] ded Hole + 0.03 – .000 + .001 ]– .000 6.1 [.242 [.44 Dia. 6.9 ± [.240 Recommended Mounting Hole Flange Mount Cable Jack Floating Rear Mount Dia. 9.5 [.372] Dia. 21.7 [.875] Ref. 35.6 [1.400] Max. 2.6 [.102] Dia. 2 Plcs. 19.1 [.750] Dia. 14.2 [.560] 9.5 [.375] 7.1 [.280] 14.2 ± .102 [.560 ± .004] + .051 – .025 + .002 ]– .001 9.6 [.377 Dia. 9.5 [.372 Dia Recommended Mounting Hole Bulkhead Feedthrough Cable Jack Rigid Rear Mount Max.35.6 [1.400] Ref.21.7 [.855] 6.4 [.250] Dia.9.1 ± 0.03 [.357 ± .001] + 0.03 – .000 + .001 ]– .000 9.1 [.359 Dia. Recommended Mounting Hole Cable Plating Part No. RG 174/U, 179, 187, 188, 316 Passivated Stainless Steel 1059523-1 Cable Plating Part No. RG 55/U, Passivated Stainless Steel 1059540-1142, 223, 400 RG 174/U, 179, Passivated Stainless Steel 1059541-1187, 188, 316 RG 178, Passivated Stainless Steel 1058572-1Double Braid Cable Plating Part No. RG 55/U, 142, 223, 400 Passivated Stainless Steel 1059525-1 Low Profile — Panel Feedthrough Cable Jack — Rear Mount 7.6 [.300] Dia. 35.6 [1.400] 22.3 [.878] Max. Ref. Dia. + 0.05 – 0.03 + .002 ]– .001 9.4 [.368 Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. Cable Plating Part No. RG 174/U, 179, Passivated Stainless Steel 1059551-1187, 188, 316 Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low Profile Feedthrough Cable Jack. Recommended removal tool part number 1059774-1 as described in the Tooling Section of this catalog.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Panel Mount Straight Terminal 2-Hole Flange Mount Plug Receptacle 22.3 [.878] 8.4 [.330] 9.9 [.390] 1.7 [.065] 6.4 [.250] 4.1 [.162] 1.3 .050 Dia.Dia. Dia. 15.9 [.625] 12.2 [.481] 6.6 [.260] 2.6 [.102] Dia. 2 Plcs. 4-Hole Flange Mount Plug Receptacle Dia.6.4 [.250] 22.3 [.878] Dia. 2 Plcs. 2.6 [.102] Sq. 12.7 [.500] Typ. 8.6 [.340] Dia.1.3 [.050] Dia.4.1 [.162] 2-Hole Flange Mount Jack Receptacle 7.6 [.300] 12.2 [.481] Dia.1.3 [.050] 27.4 [1.080] Dia.4.1 [.162] 15.9 [.625] Dia. 2 Plcs. 2.6 [.102] Plating Part No. Passivated Stainless 1059566-1 Steel Plating Part No. Passivated Stainless 1059596-1 Steel Plating Part No. Passivated Stainless 1059563-1 Steel Plating Part No. Passivated Stainless 1059594-1 Steel 4-Hole Flange Mount Jack Receptacle 27.4 [1.080] Dia. 2 Plcs. 2.6 [.102] Sq. 12.7 [.500] Typ. 8.6 [.340] Dia.1.3 [.050] Dia.4.1 [.162] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Panel Mount (Continued) Straight Terminal Threaded Installation — Panel Feedthrough Plug Receptacle 10.4 [.410] 6.4 [.250] Dia.0.5 [.020] Dia.1.6 [.064] Dia. Dia. 5.3 [.210] 5.5 ± 0.03 [.218 ± .001] 5.3 ± 0.05 [.210 ± .002] Dia. Panel 1.7 ± 0.03 [.066 ± .001] Recommended Mounting Hole Threaded Installation — Panel Feedthrough Jack Receptacle 10.4 [.410] 6.4 [.250] Dia.0.5 [.020] Dia.1.6 [.064] Dia. Dia. 5.3 [.210] 5.5 ± 0.03 [.218 ± .001] 5.3 ± 0.05 [.210 ± .002] Dia. Panel 1.7 ± 0.03 [.066 ± .001] Recommended Mounting Hole Plating Part No. Passivated Stainless 1059617-1 Steel Plating Part No. Passivated Stainless 1059657-1 Steel Plating Part No. Passivated Stainless 1059651-1 Steel Plating Part No. Passivated Stainless 1059654-1 Steel 6.4 [.250] 7.92 [.312] Dia.7.6 [.300] Dia. Dia. 0.5 [.020] 6.4 ± 0.03 [.250 ± .001] + 0.05 – .000 + .002 ]– .000 6.4 [.253 Dia. Dia. 1.2 ± 0.03 [.046 ± .001] Dia. + .000 – 0.05 + .000 ]– .002 6.3 [.248 Dia. Recommended Mounting Hole Press Fit Installation — Panel Feedthrough Jack Receptacle Press Fit Installation — Panel Feedthrough Plug Receptacle 6.4 [.250] Dia.7.6 [.300] Dia.0.5 [.020] 6.4 ± 0.03 [.250 ± .001] + 0.05 – .000 + .002 ]– .000 6.4 [.253 Dia. Dia. 1.2 ± 0.03 [.046 ± .001] Dia. + .000 – 0.05 + .000 ]– .002 6.3 [.248 Dia. Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Printed Circuit Board Mount Straight Plug Receptacle — Captured Contact Dia.1.3 [.050]12.7 [.500] 6.4 [.250] Sq. Sq. 4 Plcs. 1.0 [.040] 5.1 [.200] Typ. 5.1 [.200] Typ. + 0.08 – .000 + .003 ]– .000 1.7 [.067 Dia. Hole Typ. Recommended Mounting Hole Plating Part No. Gold 1059684-1 Plating Part No. Gold 1059681-1 Plating Part No. Gold 1059691-1 Straight Jack Receptacle — Captured Contact Dia. Dia. 1.3 [.050] 13.5 [.530] 9.5 [.375] Sq. 4 Plcs. 1.0 [.040] 5.1 [.200] Typ. 5.1 [.200] Typ. + 0.08 – .000 + .003 ]– .000 1.7 [.067 Dia. Hole Typ. Recommended Mounting Hole Right-Angle Plug Receptacle — Captured Contact Surface Mount Vertical Plug with Small Leg Dia. Sq. 1.3 [.050] 13.5 [.530] 6.4 [.250] 15.0 [.590] Sq. 4 Plcs. 1.0 [.040] 5.1 [.200] Typ. 5.1 [.200] Typ. + 0.08 – .000 + .003 ]– .000 1.7 [.067 Dia. Hole Typ. Recommended Mounting Hole Plating Part No. Gold 1253111-1 Dia.OSP Plug Sq. 1.3 [.050] 9.4 [.372] O-Ring 6.4 [.250] Sq. 4 Plcs. 1.6 [.062] 4.5 [.178] Typ. 4.5 [.178] Typ. + 0.08 – .000 + .003 ]– .000 1.7 [.067 Dia. + 0.08 – .000 + .003 ]– .000 2.5 [.098 Dia. Hole Typ. 4 Plcs.Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Hermetically Sealed Metal-To-Metal Rigid Gasket Seal — Panel Feedthrough Plug Receptacle Field Replaceable Solder and Braze-In Panel Feedthrough Plug Receptacle 10.4 [.410] 0.5 [.020] Dia. Rigid Gasket 5.3 [.210] Dia. 1.6 [.064] Dia. 9.9 [.390] 5.3 [.210] Dia. Dia. Dia. Glass Seal 5.6 ± 0.13 [.220 ± .005] 0.5 ± 0.03 [.020 ± .001] + 0.05 – 0.03 + .002 ]– .001 4.0 [.158 Rigid Gasket Seal — Panel Feedthrough Jack Receptacle 11.2 [.450] 0.5 [.020] Dia. 1.6 [.064] Dia. 5.3 [.210] Dia. Rigid Gasket VSWR RF Leakage Plating Part No.(GHz) (dB) 1.04 + .009f –(90-fGHz) Passivated stainless steel 6059632-1 Installation Thermal Limit: 250°C. Recommended Mounting Hole Detail A follows, pg 168. VSWR RF Leakage Plating Part No.(GHz) (dB) 1.04 + .009f –(90-fGHz) Passivated stainless steel 6059665-1 Installation Thermal Limit: 250°C. Recommended Mounting Hole Detail A follows, pg 168. VSWR RF Leakage Plating Part No.(GHz) (dB) 1.06 + .01f –(90-fGHz) Passivated stainless steel 1059637-1 Recommended Mounting Detail B or E follows, pg 168. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Hermetically Sealed (Continued) Field Replaceable Solder and Braze-In (Continued) Panel Feedthrough Jack Receptacle Recommended Mounting Hole Detail 10.7 [.421] Dia. Dia. 5.6 ± 0.13 [.220 ± .005] 0.5 ± 0.03 [.020 ± .001] + 0.05 – 0.03 + .002 ]– .001 4.0 [.158 Glass Seal Dia. Dia. 5.5 ± 0.03 [.218 ± .001] 1.7 ± 0.03 [.066 ± .001] 6.4 [.250] Ref. Panel 2-Hole Flange Mount Plug Receptacle With EMI/RFI Gasket — 0.5 [.018] Dia. Contact Detail A* Dia. 5.5 ± 0.03 [.218 ± .001] Ref. Panel 6.4 ± 0.08 [.250 ± .003] Dia. + .000 – 0.05 + .000 – .002 4.1 .162 ][ Detail B* (6.35 [.250] Panel Thickness) 2.6 ± 0.03 [.102 ± .001] Dia. 3.2 ± 0.13 [.125 ± .005] Panel 12.2 [.481] Ref. Detail C* 2.9 ± 0.03 [.115 ± .001] Dia. 3.2 ± 0.13 [.125 ± .005] Panel 12.2 [.481] Ref. Detail D* Dia. 5.5 ± 0.03 [.218 ± .001] 3.2 ± 0.03 [.125 ± .001] Ref. Panel 7.6 ± 0.08 [.300 ± .003] Dia. + .000 – 0.03 + .000 – .001 4.1 .162 ][ Detail E* 9.5 [.375] 6.4 [.250] Dia. Dia. Dia. 8.0 ± 0.13 [.018 ± .001] + 0.05 – 0.03 + .002 ]– .001 2.8 [.112 6.6 [.260] 12.2 [.481] 15.9 [.625] Dia. 2 Plcs. 2.6 [.102] *Consult appropriate Instruction Sheet for complete mounting details. VSWR RF Leakage Plating Part No.(GHz) (dB) 1.06 + .01f –(90-fGHz) Passivated stainless steel 1059671-1 Recommended Mounting Detail B or E follows at bottom of this page. VSWR RF Leakage Plating Part No.(GHz) (dB) 1.06 + .01f –(90-fGHz) Passivated stainless steel 1059572-1 Recommended Mounting Detail D follows at bottom of this page. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors Engineering Data Impedance — 50 ohms Frequency — dc to 28.0 GHz Temperature Rating — -65° to 125° C Electrical RG 405 (.085) Semi-Rigid VSWR — 1.05 + .01f (GHz) RF Transmission Loss — .040 x √--f (GHz) Insulation Resistance — 5,000 megohms min. Contact Resistance — Center Contact 6.0 milliohms max. Outer Contact 3.0 milliohms max. Outer Contact to Cable 0.5 milliohms max. Dielectric Withstanding Voltage — 675 volts RMS Corona Extinction Voltage at 70,000 Ft.— 250 volts min. RF High Potential at 5 MHz — 675 volts RMS RF Leakage Interface Only — -(90-fGHz) dB min. (fully mated) Power Handling — 300W at 3 GHz (sea level) and room temperature Environmental Corrosion — Method 101, Condition B, MIL-STD-202 Vibration — Method 204, Condition D, 20G’s, MIL-STD-202 Shock — Method 213, Condition I, 100G’s, MIL-STD-202 Temperature Cycling — Method 107, Condition B, MIL-STD-202 Moisture Resistance — Method 106, MIL-STD-202 Material Housing — Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582 Center Contact — Beryllium copper per ASTM-B-196 Dielectric — TFE fluorocarbon per ASTM-D-1457 Gasket (O’Ring) — MIL-P-25732 Mechanical Force to Engage — 3 pounds max. Force to Disengage — 1.5 pounds max. Center Contact Retention — 4 pounds min. Durablilty — 1,000 Cycles Radial Misalignment — Rigid Mount ±.06 [±.0025] Float Mount ±.51 [±.020] Mating Characteristics Jack Connector — Test Pin Finish — 16 micro inch max. Insertion Depth — .76/1.14 [.030/.045] Number of Insertions — 3 Test Pin Finish — 16 micro inch Insertion Force — 3 pounds max. Test Pin Finish — 16 micro inch max. Insertion Depth — 1.27/1.91 [.050/.075] Withdrawal — 1/2 ounce min. Finish Center Contact — Gold plate per MIL-G-45204, Type II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 Housing — Gold plate per MIL-G-45204, Type II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 Product Facts ■ Subminiature version of OSP Blind Mate Connectors ■ For space savings ■ Family of connectors and adapters OSSP connectors are a sub- miniature version of the OSP blind mate series. Connectors in this series incorporate the design ele- ments of the OSP interface including the float and mis- mate features. OSSP blind mates are about 40% smaller than OSP connec- tors and are designed to be used in applications where space is at a premium. A complete family of OSSP connectors and adapters is available including cable connectors, fixed and float mount panel connectors and hermetic connectors. Rigid mount units will func- tion to specifications up to ±.064 [±.0025] radial mis- alignment with the mating plug connector. Applications requiring greater than ±.064 [±.0025] radial misalignment can use either the float design or floating connector plates with guide pins.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) Interface Mating Dimensions The connector interface, specifically designed for multiple interconnects, maintains reliable perform- ance over the typical mechanical tolerance required in cost effective packaging. The interface test data shows excellent perform- ance is maintained with mat- ing gaps up to .015 inch. Jack Plug DimensionsDescription ABCDEF *With spring bottomed.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment Bulkhead Feedthrough Cable Plug — Rear Mount Dia.17.5 [.690] 3.0 [.120] Dia. Min.2.3 [.089] Max.7.3 [.289] Dia.4.6 ± 0.03 [.180 ± .001] d e + 0.03 – .000 + .001 – .000 4.6 .182 Dia. [ ] Recommended Mounting Hole Cable Plating Part No. RG 405/U,

2.16 Gold 1059857-1

[.085] Cable Part No. RG 405/U, 2.16 1059868-1 [.085] Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Cable Part No. RG 405/U, 2.16 1059874-1 [.085] Flange Mount Cable Jack — Floating Rear Mount Feedthrough Snap-In Dia. 18.0 [.710] 3.0 [.120] 7.6 [.300] 11.0 [.435] Dia.14.7 [.580] Dia. 2 Plcs.Dia. 2.3 [.089] Dia. 2.4 [.093] + 0.08 – 0.00 + .003 – .000 7.1 [.281 ] Dia. + 0.00 – 0.05 + .000 – .002 7.1 [.280 ] ded ole Dia. 5.5 [.217] 11.0 ± 0.10 [.435 ± .004] + 0.08 – 0.00 + .003 – .000 7.1 [.281 ] Dia. + 0.00 – 0.05 + .000 – .002 7.1 [.280 ] Recommended Mounting Hole Dia. 11.4 [.450] Ref. 7.6 [.300] Dia. Max. 3.0 [.120] Dia. 6.1 [.240] Dia. Compression Spring Connector Retaining Clip Recommended Mounting Hole + 0.08 – 0.00 + .003 – .000 7.1 [.280 ] + 0.05 – 0.00 + .002 – .000 6.5 [.256 ] 12.7 [.500] Ref. 18.0 [.710] 14.7 [.570] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Flexible Cable, Crimp Attachment Bulkhead Feedthrough Cable Plug — Rear Mount Ref.33.0 [1.298] Dia.4.6 ± 0.03 [.180 ± .001] d + 0.03 – .000 + .001 – .000 4.6 [.182 Dia. [.1 Recommended Mounting Hole Cable Plating Part No. RG 188/U,

316 Double Passivated Stainless Steel 1059884-1

RG 174/U, 188/U, 316U Passivated Stainless Steel 1059886-1 Flange Mount Cable Jack — Floating Rear Mount Dia. 35.6 [1.40] Max. 7.6 [.300] 11.0 [.435] Dia.14.7 [.580] Dia. 2 Plcs. 2.4 [.093]+ 0.08 – 0.00 + .003 – .000 81 ] Dia. + 0.00 – 0.05 + .000 – .002 7.1 [.280 ] Dia. 5.5 [.217] 11.0 ± 0.10 [.435 ± .004] + 0.08 – 0.00 + .003 – .000 7.1 [.281 Recommended Mounting Hole D + 0.00 – 0.05 + .000 – .002 7.1 [.280 ] Cable Plating Part No. RG 188/U,

316 Double Passivated Stainless Steel 1059888-1

RG 174/U, 188/U, 316U Passivated Stainless Steel 1059887-1 Feedthrough Snap-In Cable Jack Part No. 1059889-1 35.6 [1.400] Max. Dia.6.1 [.240] 22.4 ± 0.38 [.880 ± .015] Dia. Mounting Hole + 0.05 – 0.00 + .002 – .000 6.5 [.256 ] Dia. Mounting Hole + 0.08 – 0.00 + .003 – .000 7.1 [.280 ] Compression Spring OSSP Jack Connector Retaining Clip Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Panel Mount Press-Fit Panel Feedthrough Plug Receptacle Part No. 1059901-1 Ø 4.0 ± 0.03 [.156 ± .001] Straight Knurl O-Ring Recommended Mounting Hole + 0.08 – 0.00 + .003 – .000 Ø 4.0 [.159 ] + 0.00 – 0.05 + .000 – .002 Ø 3.9 [.154 ] + 0.05 – 0.00 + .002 – .000 11.4 [.450 ] 6.4 [.250] 5.1 [.200] 5.3 ± 0.05 [.210 ± .002] OSSP Plug Ø 0.9 ± 0.03 [.015 ± .001] Threaded Panel Feedthrough Plug Receptacle, Straight Terminal 11.4 [.450] 6.4 [.250] Dia.0.4 [.015] Dia.1.2 [.049] Dia. Dia.4.0 [.156] 4.1 ± 0.03 [.162 ± .001] 5.3 ± 0.05 [.210 ± .002] Dia.1.3 ± 0.03 [.051 ± .001] Recommended Mounting Hole Plating Part No. Passivated Stainless 1059903-1 Steel Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Straight Plug Receptacle — Captured Contact Part No. 1059919-1 O-Ring Mounting Surface Recommended Mounting Hole 5 Plcs. Hole Typ. Typ. + 0.08 – 0.00 + .003 – .000 Ø 1.7 [.067 ] 5.1 [.200] 4 Plcs. Sq. Typ. 1.0 [.040] 8.7 [.343] 12.6 [.498] OSSP Plug 5.1 [.200]5.1 [.200] 6.4 [.250] Sq. Ø 0.9 [.034] Right-Angle Plug Receptacle Part Number 1484546-1 O-Ring Recommended Mounting Hole 5 Plcs. Hole Typ. Typ. + 0.08 – 0.00 + .003 – .000 Ø 1.7 [.067 ] 5.08 [.200] 4 Plcs. Sq.1.02 [.040] 5.08 ± 0.51 [.200 ± .020] 5.11 ± 0.03 [.201 ± .001] 17.78 ± 0.25 [.700 ± .010] 5.84 [.230] 5.08 [.200] Typ.5.08 [.200] 6.35 [.250] Sq. Ø 0.86 [.034] 14.61 [.575] OSSP Subminiature Modular Blind Mate Connectors (Continued) For Printed Circuit Board Mount Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

OSSP Subminiature Modular Blind Mate Connectors (Continued) Hermetically Sealed Metal to Metal Formable Gasket — Panel Feedthrough Plug Receptacle 12.1 [.475] 1.0 [.039]Dia. 3.0 [.118]Dia.3.6 [.140]Dia. .03 [.012] Dia. VSWR RF Leakage Plating Part No.(GHz) (dB) 1.06 + .01f –(85-fGHz) Gold 1059905-1 Recommended Mounting Hole Detail A at bottom of this page. Solder and Braze-In Panel Feedthrough Plug Receptacle 8.2 [.322] Ref. 5.3 [.210]Dia. Dia. Dia. + 0.00 – 0.05 + .000 – .002 4.8 [.189 ] 0.5 ± 0.03 [.020 ± .001] VSWR RF Leakage Plating Part No.(GHz) (dB) 1.06 + .01f –(85-fGHz) Gold 1059902-1 Recommended Mounting Hole Detail B at bottom of this page. Field Replaceable Solder and Braze-In 2-Hole Flange Mount Plug Receptacle With EMI/RFI Gasket Recommended Mounting Hole Detail for Hermetically Sealed 9.5 [.375] 5.3 [.210] Dia. Dia. Dia. 8.2 ± 0.13 [.322 ± .005] 0.3 ± 0.03 [.012 ± .001] Dia. + 0.05 – 0.03 + .002 ]– .001 1.9 [.076 5.7 [.223] 9.0 [.353] 12.2 [.480] Dia. 2 Plcs. 2.4 [.093] VSWR RF Leakage Plating Part No.(GHz) (dB) 1.06 + .01f –(85-fGHz) Passivated Stainless Steel 1059894-1 Recommended Mounting Hole Detail C at bottom of this page. Dia. 3.2 ± 0.03 [.121 ± .001] Ref. Dia. + .003 – 0.05 + .001 – .002 4.1 [.162 ] Dia. + .000 – 0.03 + .000 – .001 1.0 [.041 ] 6.4 [.250] Detail A* 2.5 [.100] R 0.08 [.003] Max. + 0.03 – 0.00 + .001 – .000 Ø 4.8 [.190 ] + 0.08 – 0.00 + .003 – .000 0.8 [.031 ] + 0.08 – 0.03 + .003 – .001 R 0.13 [.005 ] + 0.05 – 0.03 + .002 – .001 Ø 5.5 [.218 ] Detail B* Detail C* *Consult appropriate Instruction Sheet for complete mounting procedure. 2.0 ± 0.03 [.078 ± .001] Dia. 3.2 ± 0.13 [.125 ± .005] Panel 9.0 [.353] Ref. 175 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors Product Facts ■ SMB offers snap-fit coupling for quick connect/disconnect ■ Choice of Commercial or High Rel Connectors ■ 50 and 75 Ω MIL-Type connectors available ■ Straight plugs and jacks are completely crimp terminated ■ Fast easy cable assembly ■ Low VSWR ■ Standard military, commer- cial or Tyco Electronics tooling ■ Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ PC Board soldered connec- tors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ Certified by Canadian Standards Association File No. LR 7189 R R R SMB Connectors are avail- able in commercial and high rel versions. They are ideally suited for circuit miniaturization and are offered in a wide range of configurations including plugs, right-angle plugs, jacks, bulkhead jacks and adapters, as well as printed circuit board and solder jacks. Termination costs are kept to a minimum using plugs and jacks with a crimp cen- ter contact and hex crimp outer braid. Both hand held tooling and pneumatic bench-mounted tooling is available. Easily assembled right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. Tyco Electronics’ 75 Ohm BT

43 SMB Connectors feature

snap-fit couplings for quick connect/disconnect. These connectors are designed to be intermateable with

75 Ohm SMB MIL-C-39012

connectors. They also fea- ture reliable dual crimp cable terminations. Packaging — All connectors are packaged individually unless otherwise noted under the “Military No. and/or Comments” column in the connector specifications chart. Between Series Adapters For SMB Between Series Adapters, please see pages 251-260.

SMB Connector Specifications Impedance — 50 ohms and 75 ohms, nominal Frequency Range — 0 to 4.0 GHz Voltage Rating (VRMS) — Sea Level 70,000 Feet 50 ohm connectors for RG 178/U series cable 300 75 50 ohm connectors for RG 316/U series cable 400 100 75 ohm connectors for RG 179/U series cable 300 75 75 ohm connectors for RG 195/U series cable 500 125 Insulations Resistance — 1000 megohms min. Contact Resistance — (milliohms max.) After Initial Environment Center contact 6.0 8.0 Outer contact 1.0 1.5 Braid to body 1.0 N/A Contact Current Rating — 1.5 amps DC max. Voltage Standing Wave Ratio (VSWR0 — to 4.0 GHz or 80% of upper cutoff frequency of the cable, whichever is lower. Mating EngagementCable Straight Right-Angle RG 178/U Series 1.30 + .04F 1.45 + .06F RG 316/U Series 1.25 + .04F 1.35 + .04F F=GHz, does not apply to 75 ohm connectors. RF High Potential Withstanding Voltage Frequency — 5 MHZ Leakage Current — N/A 50 ohm connectors for RG 178/U series cable 675 VRMS 50 ohm connectors for RG 316/U series cable 950 VRMS 75 ohm connectors for RG 179/U series cable 950 VRMS 75 ohm connectors for RG 195/U series cable 1225 VRMS RF Leakage — –55 dB min. at 2-3 GHz Insertion Loss — .30dB max. at 3 GHz Mechanical Characteristics Engagement Forces — 14 lbs. [62.3 N] maximum engagement initially. After 500 matings, 14 lbs. [62.3 N] maximum engagement and 2 lbs. [8.8 N] minimum disengagement for all of SMBs. Cable Attachment — Straight Connectors — Crimp, both center contact and braid Right-Angle Connectors — Crimp on braid and bifurcated solder center contact Durability — 500 cycles per MIL-C-39012 Contact Captivation — When captivated, the contacts will withstand 4.0 lbs. minimum axial force. Cable Retention — When properly assembled to the compatible braided coaxial cable, the retention is equal to the breaking strength of the cable. Marking — Per MIL-STD-130 Environmental Characteristics Temperature Rating — –65°C to +165°C Corrosion (salt spray) — MIL-STD-202, Method 101, test condition B, 5% salt solution Vibration High Frequency — MIL-STD-202, Method 204, test condition B (15 G’s) Shock — MIL-STD-202, Method 213, test condition B, 75 G’s at 6 milliseconds, 1⁄2 sine Thermal Shock — MIL-STD-202, Method 107, test condition B, except high tem- perature shall be +85°C. High temperature shall be +200°C for connectors using 200°C cables. Moisture Resistance — MIL-STD-202, Method 106, when interface gasket is used. No measurements of high humidity. Insulation resistance shall be 200 megohms minimum within five minutes after removal from humidity. Materials Body, Body Components and Male Contacts— Brass, half hard, per QQ-B-626, Alloy 360, Zinc per QQ-Z-363 Female Contacts — Beryllium copper per QQ-C-530, heat treated per MIL-H-7199 Insulators — TFE fluorocarbon per ASTM D 1710, Type 1, Grade 1 Lockwashers — Phosphor bronze per QQ-B-750 Crimp Ferrule — Annealed copper alloy per WW-T-799 Gaskets — Silicone rubber per ZZ-R-765, Class 11B, Grade 65-75 Plating Center Contacts — 0.00127 [.000050] min. Gold per MIL-G-452048 Type 1, Grade C, Class 1, over 0.00254 [.000100] min. nickel per QQ-N-290 Other Metal Parts — Gold, Nickel or Solder plated to meet the Finish and Corrosion requirements of MIL-C-39012 177 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors, 50 Ohm Straight Plugs Right-Angle Plugs 6.35 [.250] Dia. 6.35 [.250] Max. 21.10 [.830] Max. 13.21 [.520] Max. 13.71 [.540] Max. 6.35 [.250] Dia. 13.71 [.540] Max. 13.21 [.520] Max. Die CastMIL Type RG/U Center Outer Other Part Cable Contact Contact Metal Parts Dielectric Style No.Plating Plating Plating 178, 178A, 178B, 196, 196A Gold Gold Nickel TEFLON MIL Type 413985-6 Gold Gold Gold TEFLON MIL Type 413985-1 Gold Gold Nickel TEFLON MIL Type 413985-3 174, 316, Gold Nickel Nickel TEFLON MIL Type 413985-7188, 188A Gold Gold Nickel TEFLON Die Cast 414946-1 Gold Nickel Nickel TEFLON Die Cast 5414946-2 179, 179A, 179B, Gold Gold Nickel TEFLON MIL Type 1-413985-1 161, 187, 187A, Gold Gold Nickel TEFLON Die Cast 5414946-5 BELDEN 9221 Gold Nickel Nickel TEFLON Die Cast 5414946-6 Gold Gold Gold TEFLON MIL Type 413985-2 RG 316, Gold Gold Nickel TEFLON MIL Type 413985-4

188 Double Braid Gold Gold Nickel TEFLON Die Cast 5414946-3

Gold Nickel Nickel TEFLON MIL Type 413985-8 RG/U Center Outer Other Part Cable Contact Contact Metal Parts Dielectric Style No.Plating Plating Plating Gold Gold Gold TEFLON MIL Type 414002-7 178, 178A, 178B, Gold Gold Nickel TEFLON MIL Type 414002-8196, 196A Gold Gold Nickel TEFLON Die Cast 5414363-8 Gold Gold Gold TEFLON MIL Type 414002-1 174, 316, 188, 188A Gold Gold Nickel TEFLON MIL Type 414002-3 179, 179A, 179B Gold Nickel Nickel TEFLON MIL Type 414002-5161, 187, 187A Gold Gold Nickel TEFLON Die Cast 5414363-3BELDEN 9221 Gold Nickel Nickel TEFLON Die Cast 5414363-5 Gold Gold Gold TEFLON MIL Type 414002-2 RG 316, Gold Gold Nickel TEFLON MIL Type 414002-4188 Double Braid Gold Gold Nickel TEFLON Die Cast 5414363-4 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

SMB Connectors, 50 Ohm (Continued) Straight Jacks Bulkhead Jack Adapter (Jack-Jack) Commercial Jack Die Cast Brass 5.56 [.219] Hex. 5/4.88 Dia. [.197/.192] 2.08/2.01 [.082/.079] Maximum Panel Thickness 2.36 [.093] Recommended Panel Cutout for Bulkhead Jack and Adapter 25.40 [1.000] 6.35 [.250] Hex. 17.53 [.690] Max. RG/U Center Body Jack Cable Contact Plating Dielectric Style Part No.Plating 178, 178A, 178B, 196, 196A Gold Nickel TEFLON MIL Type 5414170-2 174, 316, Gold Nickel TEFLON MIL Type 5414170-1 188, 188A Gold Nickel TEFLON Die Cast 414948-1 RD 316, 188 Double Braid Gold Nickel TEFLON Commercial 414948-3 Center Type Contact Body Dielectric Style Part No. Plating Plating Gold Nickel TEFLON MIL Type 228553-1Jack-To-Jack Gold Gold TEFLON MIL Type 228553-2 MIL Type Jack Bulkhead Jacks 6.35 [.250 ] Hex. 28.60 [1.120] Center BulkheadRG/U Contact Body Jack.Cable Plating Plating Dielectric Style Part No. 174, 316, Gold Nickel TEFLON Commercial 5415006-1 188,188A Gold Nickel TEFLON Commercial 5228217-1 RD 316, 188 Double Braid Gold Nickel TEFLON Commercial 5415006-2 179 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) PC Board Vertical Jacks PC Board Vertical Plugs A B Jacks Center Body Dim. Dim. PartType Contact Dielectric Style Plating Plating A B No. 7.62 3.94–– Gold Gold .300 .155 TEFLON MIL Type 413990-1 7.62 3.94–– Gold Nickel .300 .155 TEFLON MIL Type 413990-2 10.16 2.54 TEFLON MIL Type 414612-2–– Gold Nickel .400 .100 Plugs Center Body Dim. Dim. Recommended PartType Contact Dielectric PC Board Style Plating Plating A B Layout No. Low Profile (Plug) Gold Nickel 3.94 7.62 TEFLON B MIL Type 415774-1Mated Pair .155 300 A B Recommended PC Board Layout 2.54 [.100] 5.08 [.200] 5.08 [.200] Ø 1.60 [.063] 4 Plcs. Ø 1.19 [.047] Ø 0.97 ± 0.03 [.038 ± .001] 11.53 ± 0.20 [.454 ± .008] 3.94 ± 0.13 [.155 ± .005] Ø 6.35 [.250] 6.32 [.249] 0.64 [.025] 1.02 ± 0.05 [.040 ± .002] 5.08 ± 0.05 [.200 ± .002] 1.42 [.056] Typ. 6.35 [.250] Sq. Typ. Recommended PC Board Layout Ø 1.60 [.063] Ø 1.19 [.047] 5.08 [.200] 2.54 [.100]4 Plcs. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

SMB Connectors, 50 Ohm (Continued) 13.46 [.530] Dia.6.35 [.250] A B Plugs Center Interface PCB Dim. Dim. Recommended PartContact Body Leg Dielectric Style PC Board Plating Plating Plating AB Layout No. 8.76 2.79Gold Nickel Nickel TEFLON .345 .110 Die Cast B 415380-1* 8.76 3.94Gold Nickel Tin TEFLON .345 .155 Die Cast A 5414338-1 * 5 leg design Recommended PC Board Layouts 5.08 [.200] 2.54 [.100] 5.08 [.200] 1.24 Dia. [.049] Min. 1.75 Dia. [.069] Min. (4 Holes) A B Ø 1.24 ± 0.05 [.049 ± .002] 2.54 [.100] 5.08 [.200] 5.08 [.200]Ø 1.75 [.069] 4 Plcs. C 2.54 [.100] 5.08 [.200] 5.08 [.200]Ø 1.32 [.052] 5 Plcs. 12.70 [.500] A B A B 13.46 [.530] Jack with Standoff PadsJack Low Profile Jacks Center Interface PCB Dim. Dim. Recommended PartType Contact Body Leg Dielectric Style PC Board Plating Plating Plating AB Layout No. 7.11 3.94Gold Gold Gold TEFLON .280 .155 MIL Type A 413996-2 Low Profile 7.11 3.94Gold Nickel Nickel TEFLON .280 .155 MIL Type A 413996-4 7.11 2.79Gold Gold Gold TEFLON .280 .110 Die Cast A 415340-1 8.76 2.79Gold Gold Gold TEFLON .345 .110 Die Cast A 415672-1 8.51 3.94Gold Gold Gold TEFLON .335 .155 MIL Type A 414026-2 8.76 3.94Gold Nickel Nickel TEFLON .345 .155 MIL Type A 414026-3 With 8.76 3.94 Standoff Pads Gold Nickel Tin-Lead TEFLON .345 .155 Die Cast A 5414337-1 8.76 2.79Gold Nickel Nickel TEFLON .345 .110 Die Cast B 5415379-1* 8.51 3.94Gold Nickel Nickel TEFLON .335 .155 Die Cast A 415381-1/H12135 7.67 2.79Bulkhead Gold Gold Gold TEFLON .302 .110 Die Cast A 414963-1 9.78 3.94 Brass,Commercial Gold Nickel Tin Polypropylene .385 .155 Stamped C 5228435-1 7.67 2.79Bulkhead Gold Gold Gold TEFLON .302 .110 Die Cast A 1274330-1 * 5 leg design PC Board, Right-Angle Jacks A B 19.87 [.782] Bulkhead Jack PC Board, Right-Angle Plug 181 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) 5/4.88 [.197/.192] Dia. 2.08/2.01 [.082/.079] Maximum Panel Thickness 2.36 [.093] Recommended Panel Cutout Bulkhead PC Board Jack, Solder Receptacle Kits SMB Receptacle Jack Center Body Kit Type Contact Dielectric Style Part Plating Plating No. Front Mount Gold Nickel TEFLON MIL Type 228216-1* Rear Mount Gold Nickel TEFLON MIL Type 228215-1* *includes Jam Nut and Lockwasher Center BodyType Contact Dielectric Style Part No. Plating Plating Front Mount Gold Nickel TEFLON MIL Type 414895-1 Lockwasher and Jam Nut Part No. 415001-2 Part No. 414969-2 Kit Includes Lockwasher and Jam Nut 6.35 [.250] 3.71 [.146] 16.0 [.630] Max. Hex. 3.68 [.145] 6.99 [.275] Dia. 0.97 ± 0.13 [.038 ± .001] Dia. Ref. Plane Hex 10-32 UNEF-2A 4.45 [.175] 3.18 [.125] 2.92 [.115] 1.02 [.040] 3.45 [.136] 6.35 [.250] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

SMB Connectors, Mini 75 Ohm Product Facts ■ Industry standard for minia- ture 75 ohm SMB ■ SMB offers snap-fit coupling for quick connect/disconnect ■ Suitable for high density ■ Fast easy cable assembly ■ Low VSWR ■ Connectors offer consistent mating and unmating forces ■ Straight plugs and jacks are completely crimp termi- nated ■ Low cost Mini 75 ohm SMB connec- tors are ideally suited for circuit miniaturization in communication, broadband and switching equipment as well as a variety of other applications. They offer the same low consistent mating/unmating force as Tyco Electronics standard SMB products and therefore, outer contact resistance values are main- tained from connector to connector. Standard military, commer- cial or Tyco Electronics tool- ing can be used to terminate these products. Cost effective assembly of the straight plugs is com- pleted with a crimp center contact and hex crimp on the outer braid. Right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. Impedance — 75 ohms Frequency Range — 0 to 4.0 GHz Insulation Resistance — 1000 megohms Contact Current Rating — 1.5 amps DC max. Mechanical Characteristics Engagement Forces — Initial—14.0 lbs. [62.3 N] maximum engagement. After 500 matings, 14.0 lbs. [62.3 N] maximum engagement. Durability—500 cycles Environmental Characteristics Temperature Rating — -65°C to +165°C 183 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors, Mini 75 Ohm (Continued) RG Cable Center Contact Outer Contact Body Part No.Plating Plating Plating 179, 187 Gold Nickel Nickel 5415484-1 179, 187 Gold Gold Nickel 5415484-2 RD 179 Gold Gold Nickel 5415484-3 RG Cable Center Contact Outer Contact Body Part No.Plating Plating Plating 179, 187 Gold Gold Nickel 5415487-1 179, 187 Gold Nickel Nickel 5415487-2 RD 179 Gold Nickel Nickel 5415487-3 RG Cable Center Contact Body Part No.Plating Plating 179, 187 Gold Nickel 415500-1 Ø 6.35 [.250] Ø 1.73 [.068] Ø 2.64 [.104] 17.78 [.700]Ref. 9.78 ± 0.25 [.385 ± .010] 13.7 [.539] Max. 16.0 [.630] Ref. Ø 6.35 [.250] 10.21 [.402] Ref. 22.86 [.900] Max. 6.35 [.250] Hex. 10.92 [.430] 9.7 [0.38] Ø 3.66 ± 0.05 [.144 ± .002] 4.52 [.178] Ø 5.03 [.198] Recommended PC Board Layout Straight Plug Right-Angle Plug Bulkhead Jack Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMB Connectors, Mini 75 Ohm (Continued) Leg Center Contact Body Part No.Length Plating Plating 2.11 .083 Gold Gold Flash 415504-2 3.05 .120 Gold Gold 415504-3 3.05 .120 Gold Gold Flash 415504-4 Leg Center Contact Body Part No.Length Plating Plating 2.79 .110 Gold Gold 415490-1 2.79 .110 Gold Nickel 415490-2 2.11 .083 Gold Gold 415490-3 2.11 .083 Gold Nickel 415490-4 Leg Center Contact Body Part No.Length Plating Plating 2.79 .110 Gold Nickel 415377-1 2.79 .110 Gold Gold 415377-2 2.79 .110 Gold Gold 415377-5* *Isolated. Vertical PC Board Jacks 7.62 ± 0.18 [.300 ± .007] Ø 3.67 [.145] Max. 5.08 ± 0.08 [.200 ± .003] 5.08 ± 0.08 [.200 ± .003] Ø 0.71 ± 0.08 [.028 ± .003] Ø 1.32 ± 0.08 [.052 ± .003] 4 Plcs. 2.54 ± 0.08 [.100 ± .003] Recommended PC Board Layout 7.95 ± 0.25 [.313 ± .010] 5.54 [.218] 3.18 [.125] Ø 3.71 [.146] Max. 14.1 [.555] 5.08 ± 0.08 [.200 ± .003] 5.08 ± 0.08 [.200 ± .003] Ø 0.71 ± 0.08 [.028 ± .003] Ø 1.32 ± 0.08 [.052 ± .003] 4 Plcs. 2.54 ± 0.08 [.100 ± .003] Recommended PC Board Layout 4.50 [.177] Ø 3.71 [.146] 2.79 [.110] 19.94 [.785] 2.36 [.093] Panel Thickness Max. Max. 11.18 [.440] 5.08 ± 0.08 [.200 ± .003] 5.08 ± 0.08 [.200 ± .003] Ø 0.71 ± 0.08 [.028 ± .003] Ø 1.32 ± 0.08 [.052 ± .003] 4 Plcs. 2.54 ± 0.08 [.100 ± .003] Recommended PC Board Layout Right-Angle PC Board Jacks Right-Angle PC Board Bulkhead Jacks 185 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) Product Facts ■ Widely used in data transmission and telecom- munication applications ■ BT 43 connector developed from the SMB range and feature snap-on and latch ing variant ■ Most BT 43 connectors are available as fully crimped connectors. ■ BT 43 and 75 Ω connectors available in solder and crimp versions The Tyco Electronics range of 75 ohm SMB (SMZ) connectors are designed to meet the increasing demands of the Telecommunications market, and are designed in accordance with BS9210 F0022. Specifications Max working voltage (dc) — 500 V Max proof voltage (dc) — 1.5 kV Contact resistance (inner) — 5 milliohm Contact resistance (outer) — 1 milliohm Bodies and other parts — Brass Female center contacts — Copper Alloy Male center contacts — Copper Alloy Outer contacts — BeCu Plating — Contacts and critical surfaces — Gold Other parts — Nickel Insulators — P .T.F .E.

SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Cable Type Termination Method Body Plating Part No.Inner Outer RG 179B/U Crimp Crimp Selective Gold 1311097-1 BT2002 Crimp Crimp Selective Gold 1311098-1 Straight Plugs, Snap-On 30.5 [1.20] 28.0 [1.10] 20.4 [0.80]8.8 [0.35] Assembled Dia. Straight Plugs, Latching, Crimp/Crimp 9.6 [0.38] 27.8 [1.09] 29.9 [1.18] Assembly Dia. Cable Type Body Plating Part No RG 179B/U Selective Gold 1311099-1 BT2003 Selective Gold 1311100-1 BT2002 Selective Gold 1311101-1 BT2001 Selective Gold 1311696-1 BT3002, TZC75024 Selective Gold 1311102-1 RG 59B/U, Selective Gold 1313507-1RG 140/U, URM90 187 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Right-Angle Socket, Latching, Solder/Crimp 23.0 [0.91] 21.0 [0.83] 16.3 [0.64] 9.9 [0.39] Ref. Ref. Ref. Ref. Cable Type Body Plating Part No RG 179B/U Selective Gold 1311106-1 BT2003 Selective Gold 1311698-1 BT3002, TZC75024 Selective Gold 1311111-1 RG 59B/U, RG 140/U Selective Gold 1313508-1 Straight Free Plug, Crimp/Crimp 8.82 [0.35] 30.4 [1.20] Assembled 20.2 [0.80] 5.60 [0.22]Dia. Cable Type Body Plating Part No RG 179B/U Selective Gold 1408041-1 Right-Angle Socket, Snap-On, Solder/Crimp 17.93 [0.71] 21.67 [0.85] 16.86 [0.66] Max. 10.16 [0.40] Max. Max. Max. Cable Type Body Plating Part No RG 179B/U Selective Gold 1311103-1 BT3002, TZC75024 Selective Gold 1311104-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Straight Bulkhead Plug 30.8 [1.21] Assembled Max Panel 28.5 [1.12] 10.8 [0.43] 5.6 [0.22] 7.5 [0.30] 8.4 [0.33] Dia. 3.0 [0.12] Mounting Detail Cable Type Termination Method Body Plating Part No.Inner Outer RG 179B/U Crimp Crimp Selective Gold 1311120-1 BT500B, BT2003, Crimp Crimp Selective Gold 1311701-1BT2003A BT3002, TZC75024 Crimp Crimp Selective Gold 1311122-1 Right-Angle Bulkhead Plug, Solder/Crimp 20.4 [0.80] 21.5 [0.85] Ref. 16.7 [0.66] Ref. 10.1 [0.40] Ref. Cable Type Body Plating Part No RG 179B/U Selective Gold 1311115-1 7.50 [0.30] 8.00 [0.31] A/F 32.1 [1.26] Assembled Length 10.75 ± 0.05 [0.37 ± .004] Panel Cut Out Dia. Cable Type Termination Method Body Plating Part No.Inner Outer 3M: 043, 031C, Crimp Crimp Selective Gold 1313511-1CS4456, Gore: GCX 189 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

6.20 [0.24] 0.90 [0.04] 11.4 [0.45] 3.80 [0.15] 5.08 [0.20]5.08 [0.20] Mounting Detail 1.20 [0.05] Dia.

1 Hole

Dia. Dia. Dia. 1.70 [0.07] Body Plating Part No. Selective Gold 1311125-1 PC Board Plug 43/1E 13.2 [0.52] 5.08 [0.20] 5.08 [0.20] 1.20 [0.047] Dia. Dia. 1.70 [0.067] 9.5 [0.37] 6.5 [0.26] Sq. 15.0 [0.59] Mounting Detail Body Plating Part No. Selective Gold 1314103-1 190 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) DDF Plug, Crimp/Crimp 30.4 [1.20] Assembled 27.9 [1.10] 10.3 [0.41]Dia. Cable Type Body Plating Part No RG 179B/U Selective Gold 1327083-1 BT2003 Selective Gold 1311117-1 BT2002 Selective Gold 1311700-1 B2001 Selective Gold 1313883-1 BT3002, TZC75024 Selective Gold 1311118-1 RG 59B/U, RG 140/U, Selective Gold 1313887-1URM90 DDF Plug, Crimp/Crimp Cable Type Body Plating Part No RD179, 124431 (Filotex), 1366 (Orebro), K02253D-1, Selective Gold 1314422-1 K02253-2 (Shuner) 27.8 [1.09] Ref. Ref.7.54 [0.30] Right-Angle PC Board Plug 22.14 [.872] Mounting Detail Panel Cutout Detail 5.08 [.200] 5.08 [.200] 2.54 [.100] 2.54 [.100] 14.00 [.551] Ø 8.21 [.323] 5/16-32 UNEF Min. Ø 6.22 [.245] Ø 1.70 [.067] Min.Ø 1.20 [.047] 2.90 ± 0.10 [.114 ± .004] Ø 8.35 ± 0.10 [.329 ± .004] Part No. 1314102-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Tester 430A 37.4 [1.47] 11.1 [0.44] Dia. 8.8 [0.35] Dia. Extraction Tool 65A 100.0 [3.94] 10.0 [0.39] Dia. Body Plating Part No. Selective Plating 6-1311703-1 Straight Adapter Plug-Plug 17.0 [0.67] 8.7 [0.34] A/F 2.2 [0.09] Max. Panel 17.1 [0.67] 7.5 [0.30] 8.0 [0.31] 11.0 [0.43] Dia. Dia. Mounting Detail Body Plating Part No. Selective Gold 1313364-1 Selective Gold 1311127-1 Part No. 1313364-1 Part No. 1311127-1 Part No. 1311164-1/H12135 191 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMB Connector Crimp Tooling * DANIELS Manufacturing Corporation

6103 Anno Avenue

Orlando, Florida 32809 Note: Equivalent military tool part numbers– M22520/5-01 – DANIELS Hand Tool HX4 M22520/5-33 – DANIELS Die Set Y136 M22520/5-37 – DANIELS Die Set Y138 M22520/5-41 – DANIELS Die Set Y140 M22520/5-03 – DANIELS Die Set Y196 M22520/2-01 – DANIELS Hand Tool AFM8 Telephone: 407-855-6161 FAX: 407-855-6884 50 Ω/75 Ω Commercial Connector Tooling MIL Type Connector Tooling Center Contact Crimp Tooling Braid Crimp Tooling Center Contact Crimp Tooling Braid Crimp Tooling Dies for MIL-C- Dies for MIL-C- Dies forRG/U Tyco Electronics 22520/2-01 Tyco Electronics 22520/5-01 DANIELS* DANIELS* Selector Tyco Electronics DANIELS Hex DieCable PRO-CRIMPER Tool PRO-CRIMPER Tool Hand Positioner Position PRO-CRIMPER Hand Across Hand Tool DANIELS* Position Hand Tool DANIELS* Hex Tool Number Hand Tool Tool Flats Number Positioner Number Position Crimp Die Number Position 178, 178A, Female-K699 Female-K699 2.67178B, 196, 58489-1 4 58489-1 A&B Y624 AFM8 4 58483-1 A HX4-1637 196A Male-K727 Male-K727 .105 Double Braid —— —— —— AFM8 Female-K699 4 58483-1 B HX4-1637 3.25 178, 196 Male-K727 .128 174, 316 58489-1 Female-K699 4 58489-1 A Y444 AFM8 Female-K699 4 58483-1 B HX4-1637 3.25 188, 188A Male-K727 Male-K727 .128 Double Braid Y196 3.84174, 316, 58489-1 Female-K699 4 58489-1 C AFM8 Female-K699 4 58483-1 C HX4-1637 188 Location A .151 Double Braid Y196 3.25174, 316, 58489-1 Male-K727 4 58489-1 C AFM8 Solder — 58483-1 B HX4-1637 188 Location A .128 179, 179A 179B, 161, 58489-1 Female-K699 4 58489-1 A Y444 AFM8 Female-K699 4 58483-1 B HX4-1637 3.25 187, 187A, .128 BELDEN 9221 179, 179A 179B, 161, 58489-1 Male-K727 4 58489-1 A Y444 — Solder — 58483-1 B HX4-1637 3.25 187, 187A, .128 BELDEN 9221 180, 180A —— —— —— — Solder — 58483-1 C HX4-1637 3.84 180B .151 Mini SMB 75 ohm 179, 187 — Female-K699 — 58483-1 B HX4-1637 — — — — — — — Solder 179, 187 — Center — 58483-1 B HX4-1637 — — — — — — — Contact Note: All 75 ohm SMB connectors have a solder center contact. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. DANIELS is a trademark of Daniels Manufacturing Corporation.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMC Connectors Product Facts ■ Three-piece designs ■ Fast, clean cable assembly ■ Connector bodies preassembled ■ Solderless termination — no danger of heat damage ■ Center conductor and braid terminated with same tool ■ Low noise level ■ Miniature screw-on coupling ■ TEFLON dielectric The SMC Connector is miniature and light-weight, especially designed for use in critical applications where limited space and vibration are of major concern. This connector is designed in accordance with the requirements of Specification MIL-C-39012, Class II, Category B to assure the highest standards of electrical and mechanical performance. It has a con- stant impedance of 50 ohms, a voltage rating of 350 volts and provides excellent operation at frequencies up to 10 GHz. It also has a threaded coupling and can be used with a wide range of miniature coaxial cable sizes including RG 174, 197, 187, 188 and 316. Materials Brass — QQ-B-626 Beryllium Copper — QQ-C-530 Copper — QQ-C-576 TEFLON Insulation — MIL-P-19468 Plating Gold — MIL-G-45204 Nominal Impedance — 50 ohms Working Voltage — 335 volts rms Frequency Range — 0 to 10 GHz Insulation Resistance — 1000 megohms min. Contact Resistance — Outer Contact — 1 milliohms Center Contact — Straight Connectors — 6 milliohms Right-Angle Connectors — 12 milliohms Dielectric Withstanding Voltage — 1000 volts rms RF Leakage — –60 dB min., between 2 and 3 GHz RF Insertion Loss — Straight Connectors — 0.25 dB max. at 4 GHz Right-Angle Connectors — 0.50 dB max. at 4 GHz Corona Level — 250 volts min. at 70,000 ft [21 336 m] Mechanical Characteristics Mating/Unmating — 10-32 threaded coupling Cable Attachment — Crimp type, both center contact and braid Coupling Nut Retention — 35 lb [156 N] min. Cable Retention — 20 lb [89 N] min., GR-174 cable Durability — 500 cycles per MIL-C-39012 Environmental Characteristics Temperature Range — –65°C to +85°C Vibration — MIL-STD-1344, Method 2005, Condition IV Salt Spray — MIL-STD-1344, Method 1001, Condition B Temperature Cycling — MIL-STD-1344, Method 1003, Condition A (except low temperature is –65°C) TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMC Connectors (Continued) 26.00 [1.022] Ref. 3.90 [.155] Ref. SMC Plug Reference Plane Cable Ref. Plane 9.50 [.375] Ref.13.80 [.545] Hex.5.50 [.218]Hex.5.90 [.234] Part No. 1060220-1 Crimp 26.00 [1.022] Ref. 3.90 [.155] Ref. SMC Plug Reference Plane Cable Ref. Plane 9.50 [.375] Ref.13.80 [.545] Hex.5.50 [.218]Hex.5.90 [.234] Part No. 1060221-1 Crimp 16.90 [.667] Ref. 5.50 [.218] Hex. 5.90 [.234] Hex. Cable Ref. Plane Ref. Plane SMC Plug 3.90 [.155] Ref. Part No. 1060163-1 Clamp Cable RG/U Part No.Attachment Cable Crimp 178, 178A, 178B 1060220-1196, 196A Crimp 174, 316 1060221-1188, 188A Clamp 174, 316 1060163-1188, 188A Bulkhead Feedthrough Cable Jacks 19.80 [.780] Assembled View 3.18 [.125] 6.35 [.250] 5.94 [.234] 4.37 [.172] Recommended Strip Length Suggested Panel Cutout Ø 4.88–5.00 [.192–.197] 2.01–2.08 [.079–.082] Max. Contact Ferrule Nut Hex. Cable Customer Supplied Lockwasher Plug Assembly Cable RG/U Part No.Attachment Cable Crimp 174, 316 51751-1188, 188A Straight Jacks 24.20 [.953] Nom. 6.00 [.236] Across Flats Clamp Nut 10-32, UNF-2A Sub-Assembly Cable RG/U Part No.Attachment Cable Clamp 174, 316 1311638-1188, 188A Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. Straight Plugs

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMC Connectors (Continued) Press-In Panel Jacks, Straight Terminal 3.50 [.138] 5.05 [.199] 1.00 [.039] 5.20 [.205] 4.50 [.177] 2.00 [.079]16.50 [.650] 5.00 [.197] Ø 0.90 [.035] Part No. 1460470-1 11.40 [.448] 7.40 [.293] 6.20 [.243] 1.30 [.050] 3.90 [.155] 3.20 [.125] Ref. Ref. Plane 6.40 [.250] 1.00 [.038] Sq. 5.10 [.200] Typ. 2.50 [.100] Typ. Dia. 1.00 [.040] Sq. 4 Plcs. SMC Jack .190-32, UNF-2A Part No. 1060256-1 Right-Angle Cable Plug 14.60 [.575] Ref. 6.50 [.256] Ref. 15.10 [.594] 6.40 [.250] 1.00 [.040] Cable Ref. Plane Ref. Plane Ref. Ref. SMC Plug Hex.5.50 [.218] Hex.5.90 [.234] Cable RG/U Part No.Attachment Cable Clamp 174, 316 1060183-1188, 188A PC Board Jack Receptacles Straight 11.00 [.432] 3.90 [.152] 3.90 [.155] 0.50 [.020] Ref. 14.20 [.563] 7.10 [.280] Ref. 1.00 [.038] 5.10 [.200] 6.30 [.250] Typ. 1.00 [.040] Sq. Typ.1.80 [.070] Typ. 1.80 [.070] Typ. Dia. SMC Jack .190-32, UNF-2A Part No. 1060259-1 5.08 [.200] Ø 1.30 [.051] 5.08 [.200] 2.54 [.100] 2.54 [.100] 4 Plcs. + 0.08 – 0.00 + .003 – .000 Ø 1.70 [.067 ] Rcommended PC Board Layout Right-Angle Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors MCX Connectors Product Facts ■ Snap-on interface facilitates assembly ■ Conforms to CECC interface specifications for MCX ■ 30% smaller than SMB connectors ■ Surface mount tape and reel for high volume ■ 50 and 75 ohm versions available Tyco Electronics MCX microminiature snap-on connectors offer an excel- lent blend of size, durability and performance for emerging applications in GPS, automotive and wire- less communications. MCX connectors are 30% smaller than traditional snap-on SMB connectors, offering greater packaging density and weight reduction. MCX connectors are mechani- cally robust with beryllium copper spring fingers rated at a minimum of 500 mating cycles. The snap-on inter- face facilitates assembly, eliminating the need for a threaded connection, and ensuring full engagement. The forces to engage and disengage have been opti- mized to ensure ease of mating as well as to prevent damage to PCB solder connections. MCX connec- tors are designed for broad band performance, DC-6 GHz, and can be utilized for future system upgrades without concerns for performance degradation. Tyco Electronics MCX connectors are fully mate- able with standard MCX connectors and conform to the CECC interface specifications. MCX connectors are avail- able in a broad range of standard configurations for commercial applications. Tape and reel packaging for MCX surface mount straight and right-angle PCB recep- tacles is available to facili- tate high volume pick and place manufacturing. MCX surface mount connectors are designed to withstand infrared reflow, convection and vapor phase soldering and provide a .254 [.010] standoff for optimal board cleaning. MCX plug and jack PCB receptacles also offer a direct board to board solution providing a nominal 7.11 [0.28] separation. Between Series Adapters For MCX Between Series Adapters, see pages 251-260.

MCX Connectors (Continued) General CECC 22220 PARA Materials — Brass alloys UNS C36000 (ASTM-B16) or C38500 per QQ-B626, Beryllium copper per ASTM B-196, PTFE fluorocarbon per ASTM-D-1710 Finish — Center Contacts: Gold plated (ASTM-B488) over nickel plate (QQ-N-290) — Outer Contacts: Gold plated (ASTM-B488) over nickel plate (OO-N-290) — Housings: Nickel plated (QQ-N-290), tin (ASTM-B488) or Gold plated (ASTM-B488) — All other metal parts shall be furnished so as to provide a connector which meets corrosion requirements of CECC 22220 PARA 4.6.10 Design — The design shall be such that the outline and interface dimensions shown in this catalog and the requirements of CECC 22220 PARA are met Electrical CECC 22220 PARA (General requirements performance may vary by cable) Frequency — dc - 6 GHz Nominal Impedance — 50 ohms Voltage Rating — 335 Volts (VRMS Maximum) @ Sea Level VSWR 4.4.1 1.25:1 Maximum @ 4 GHz — 1.35:1 Maximum @ 6 GHz Insulation Resistance 4.4.4 10,000 Megohms Minimum Insertion Loss — .1dB Maximum/1000 MHz Dielectric Withstanding Voltage 4.4.5 1000 Volts (VRMS Minimum) @ Sea Level Contact Resistance Center Contact 4.4.2 5.0 Milliohms Maximum Outer Contact 4.4.3 1.0 Milliohms Maximum Corona 70,000 ft. — 250 Volts (VRMS Minimum) @ MHz RF High Potential @ Sea Level — 670 Volts (VRMS Minimum) @ MHz Contact Current — 1.5 ADC Max Mechanical CECC 22220 PARA Force to Disengage — 8 – 20 N [1.8 – 4.5 lbs.] Contact Captivation 4.5.2 Designed to maintain MCX interface when mating 10 N [2.2 lbs.] axial Connector Durability 4.7.1 500 insertion and withdrawal cycles Environmental CECC 22220 PARA Temperature Rating — –65˚C + 165˚C Vibration 4.6.3 See CECC 22220 Moisture Resistance 4.6.4 See CECC 22220 Corrosion 4.6.10 See CECC 22220 Thermal Shock 4.6.7 See CECC 22220 Meets or exceeds requirements of CECC 22220. Tyco Electronics has design control and all data contained herein is subject to chan ge without notice. Contact Tyco Electronics for specifications on other connector types. F E D DIA.CDIA.B A DIA.G I DIA. J DIA. H DIA. M L K N Plug Letter Minimum Maximum B 2.00 [.0788] — C— 3.8 [.148] F 4.15 [.164] — G 2.80 [.111] — Jack Letter Minimum Maximum H— 1.98 [.077] Specifications 197 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors MCX Connectors (Continued) 12.00 [.472] 6.15 [.242] 7.92 [.312] Ref. 5.00 [.197] 3.50 [.137] Sq. MCX Plug 16.3 [.642] Ref. 5.00 [.197] Dia. MCX Plug Right-Angle Cable Plug, Crimp Straight Cable Plug, Crimp Cable Plating Part No. RG 178/U, 196/U Nickel 1060869-1 RG 174/U, 188/U, 316/U Nickel 1060872-1 Gold 1060871-1 RD-316 Nickel 1060875-1 Gold 1060875-2 Note: For full crimp attachment consult Tyco Electronics at the numbers listed below. Cable Plating Part No. RG 178/U, 196/U Nickel 1329293-1 RG 188/U, 316/U Nickel 1330723-1RG 179/U, RG 187/U RD-316 Nickel 1363301-1 Gold 1363301-2 Straight Cable Terminal, PC Board, Without Center Contact 4.00 [.157] A Ref. B 5.80 [.228] Dia. Cable Dim. A Dim. B Plating Part No. 11.76 3.94 Nickel 1060811-1 RG 174/U, .463 .155 Gold 1060811-2 188/U, 316/U 10.74 2.92 .423 .115 Gold 1060813-2 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

MCX Connectors (Continued) Bulkhead Cable Jack 17.0 [.669] 1.40 [.055] Ref. 5.00 [.197] 4.90 [.193] Min. 4.50 [.177] Min. Recommended Mounting Hole Max Panel Thickness 4.80 [.189] Dia. MCX Jack Cable Plating Part No. RG 188/U, RG 316/U Nickel 1060883-1 5.00 [.197] 11.3 [.445] Dia. MCX Plug Cable Plating Part No. RG 405/U [.085] Gold 1060772-1 .047 Gold 1060772-2 Straight Cable Plug, Direct Solder Attachment For Semi-Rigid Cable 5.00 [.197] 11.9 [.469] MCX Jack Dia. Cable Plating Part No. RG 405/U [.085] Gold 1060774-1 .047 Gold 1060774-2 Straight Cable Jack, Direct Solder Attachment For Semi-Rigid Cable 199 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors MCX Connectors (Continued) Right-Angle Plug Receptacle, Direct Solder Attachment For Semi-Rigid Cable 3.10 [.122] 7.00 [.276] 7.92 [.312] MCX Plug 5.00 [.197] 3.48 [.137] 6.15 [.242] Dia. Cable Plating Part No. RG 405/U Gold 1060787-1 Plating Part No. Nickel 1061015-1 Gold 1085221-1 Vertical Plug Receptacle, PC Board 0.97 [.038] 5.77 [.227] MCX Plug 4.45 [.175] 3.94 [.155] Dia. 6.00 [.236]Sq. 5.08 [.200] Typ. 0.91 [.036] Sq. 4 Plcs. 0.97 [.038] MCX Jack 4.45 [.175] Dia. 5.08 [.200] Typ. 6.00 [.236] Sq. A B 0.91 [.036] Sq. 4 Plcs. Dim. A Dim. B Plating Part No. 8.28 2.92 Nickel 1060985-1 .326 .115 Gold 1060984-1 9.30 3.94 Nickel 1060989-1 .366 .155 Gold 1330126-1 7.09 1.73 Nickel 1060996-1 .279 .068 Gold 1060995-1 Vertical Jack Receptacle, PC Board Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

MCX Connectors (Continued) 10.31 [.406] 4.45 [.175] 4.70 [.185] 1.68 [.066] 3.91 [.154] 4.57 [.180] Ref. 0.97 [.038] Dia. Pin 6.35 [.250] MCX Jack Sq. A B 0.97 [.038] Dia. 9.50 [.374] 6.50 [.256] 3.00 [.118] 6.00 [.236] Sq. 5.08 [.200] Typ. 0.91 [.036]Sq. 4 Plcs. MCX Jack 8.70 [.342] 6.35 [.250] .580 [.023] 6.50 [.256] 4.50 [.177] Min. 5.50 [.217] 2.50 [.098] MCX Jack Across Flats Lockwasher Hex. 0.97 [.038] Dia. Dia. Recommended Mounting Hole 4.90 [.193]Dia. Min. .190-56,UNS-2A Max. Panel Vertical End Launch, PC Board Plating Part No. Tin 1061007-1 Right-Angle Jack Receptacle, PC Board Dim. A Dim. B Plating Part No. 9.93 3.94 Nickel 1061023-1 [.391] [.155] Gold 1061022-1 7.72 1.73 Nickel 1061027-1 [.304] [.068] Gold 1061026-1 8.92 2.92 Nickel 1061030-1 [.351] [.115] Gold 1061029-1 Jack Receptacle, Bulkhead Feedthrough Plating Part No. Nickel 1060960-1 Gold 1060959-1 201 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors MCX Connectors (Continued) 5.90 [.231] Ref. 4.45 [.175] MCX Jack 0.97 [.038] Dia. 6.00 [.236] Sq. 5.08 [.200] Typ. 0.91 [.036] Sq. 4 Plcs. Vertical Jack Receptacle, Surface Mount Plating Part No. Tin 6061002-1 6061092-11 1Tape and Reel packaging. 900 connectors per reel (carrier width 16mm, carrier pitch 12mm). 6.50 [.256] 3.50 [.137] 0.97 [.038] 9.50 [.374] 6.50 [.256] Dia. 6.00 [.236] Sq. 5.08 [.200] Typ. 0.91 [.036] Sq. 4 Plcs. MCX Jack Right-Angle Jack Receptacle, Surface Mount Plating Part No. Tin 6061035-1 Tin 6061094-11 1Tape and reel packaging. 750 con- nectors per reel (carrier width 24mm carrier pitch 12mm). Recommended Mounting Pattern for Microstrip Line Notes: 1. Printed circuit board material: glass epoxy FR-4 or similar; rela- tive permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.58 [.062] board thickness. 3. Decimal inch equivalents are shown in parentheses for general information only. 1.78 [.070] 8.89 [.350] 2.54 [.100] 11.43 [.450] 5.08 [.200] 5.72 [.225] 2.54 [.100] 4.45 [.175] .953 [.375] 5.08 [.200] Dia. Pad 5 Plcs. 1 oz. Copper Area Free of Solder Mask 2.22 [.088] 4 Plcs. .510 [.020] Dia. Via. 4 Plcs. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Vertical Jack, PC Board,

75 Ohm

Plating Part No. Gold 1363106-1 6.4 [.252] 10.0 [.394] 5.99 [.236] 3.4 [.134] 0.7 [.026] Dia. 9.4 [.370] 0.8 [.036] 4 Plcs. 5.08 [.200] Sq. 6.0 [.236] Sq. Sq. 2.54 [.100] 5.08 [.200] 1.3 [.051] Thru 5 Plcs. MCX Connectors (Continued) Straight Cable Plug, Crimp, 75 Ohm Cable Plating Part No. RG 179/U Nickel 1362990-1 Cable Plating Part No. RG 179/U Nickel 1362991-1 Right-Angle Cable Plug, Crimp, 75 Ohm Vertical Plug, PC Board, Plating Part No. Nickel 1361169-1 17.5 [.687] Ø 5.0 [.196] 12.4 [.490] 9.9 [.390] 7.9 [.312] 6.1 [.241] 6.86 [.270] 6.35 [.250] Ø 0.71 [.028] 1.91 [.075] 6.0 [.236] 5.08 [.200] Typ. Typ. Sq. Sq. 2.54 [.100] 0.91 [.036] 4 Plcs. Typ. 203 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Compression Coax Board-to-Board Connectors Board-to-Board RF Connector Series ■ Single connector product ■ Surface mount technology ■ Excellent price-to- performance ratio Product Facts ■ Single connector design — no mating connectors needed ■ Available in four sizes for varied board spacing: 14mm, 10mm, 6.65mm and 4mm ■ Large radial and axial misalignment: For positioning both boards and for gap between boards ■ Surface Mount Device for standard pick & place compatibility ■ Gold plated phosphor bronze and brass contacts, stainless steel springs ■ Mating directly on target board ■ Easy connection without risk of breaking soldering or connector when mating or unmating ■ Low applied material and assembly costs ■ Modular parallel board-to- board blindmate ■ Base Station / Sub Station systems ■ PDA / PCS / Cellular Handset applications ■ Wireless Communications systems (GSM, PCS, WCDMA, UMTS) Related Product Data Internet — http://tycoelectronics.com/products/rfcoax Product Specification/Design Objectives — 108-71060 Test Report — 501-90021 Sample Kit — 1-1773441-3 Specifications Characteristic Impedance —

50 Ohms

Frequency Range — Up to 6 GHz Return Loss — –20dB min.; up to

2.2 GHz (all misalignments)

Shielding Effectiveness — –60 dB min.; up to 2.2 GHz Working Voltage — 125 VAC, 50 Hz (at sea level) Dielectric Withstanding Voltage —

500 VAC, 50 Hz (at sea level)

Insulation Resistance —

100 Megohms

Operating Temperature — –40 to +125°C Mating Force — 10 N Durability — 25 cycles Angle Between Boards — ± 2° max. Axial Misalignment — ± 1.0mm from nominal boards stacking height; ± 0.4mm, ± 0.3mm for shortest models (Part Numbers 619135 and 1658260) Radial Misalignment — ± 0.8mm from center line in any direction Vibration — 20 g between 58-500 Hz (Const. amplitude of 1.5 mm between 10-58 Hz) H 2° Max. Target Board Base Board Part Number Height “H” 619127-1 14 ± 1.0mm 619134-1 10 ± 1.0mm 619135-1 6.65 ± 0.4mm 1658260-1 4 ± 0.3mm Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 STAX Coax Connectors Product Facts ■ Low cost, low height and high performance ■ Low insertion loss 0 to –0.5 dB from 0 to 6 GHz ■ VSWR < 1.07 from 0 to 6 GHz ■ Wide working range of deflection ■ Long term reliability and durability ■ Surface mount/pick and place ■ Low board separation ≤ 2.5 mm ■ Technology can support board separations ≤ 1.5 mm ■ Easily modified free height ■ No tooling required for height modifications ■ Modified prototype samples within 2 weeks Tyco Electronics’ STAX coax RF connector is the first surface mount RF board-to-board connector on the market that uses elastomeric connector technology to provide an economical means to achieve low board separa- tion while maintaining excellent RF signal integrity between PCBs. The connector uses laminated sections of conductive and non- conductive silicone that are tuned to provide a 50 ohm impedance line between mated substrates. The single piece construction of the STAX coax RF connector eliminates some of the signal anomalies normally associated with mated pairs of metal contact coax connectors. The dimensional relationship of the inner and outer conductor is consistently maintained throughout the connector. With its metal holder, the STAX coax RF connector can be surface mount soldered to the PCB. An additional metal SMT holder aligns the connector to the mating PCB. If adequate PCB alignment is already maintained by other means, the STAX RF connector may not need the additional mating receptacle and can become a blindmating connector. This has an additional advantage in space constrained mobile applications where very fine-pitch board-to-board connectors are also used. Related Product Data Internet — www.elastomerictech.com www.tycoelectronics.com Elastomeric Technologies Applications Engineering — Phone: 1-800-989-STAX ext. 4453 Fax: 1-215-784-4522 E-mail: ETIapplicationseng@tycoelectronics.com Technical Documents — Qualification Test Report — T R 368 RF Performance Report — 00266 Contact Resistance — < 50 m Ω Insulation Resistance— 10 12 Ω min. Dielectric Withstanding Voltage (without breakdown or arcing) —

1000 Volt

Board Separation — 2.5 mm ± 0.2 (std. part) PCB Board Area — 4.0 mm dia. Typical Clamping Force — See chart Environmental Characteristics Operating Temperature — –40°C to +125°C Moisture — 0 to 100% RH RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 STAX Coax Connectors (Continued) RF Coax Connectors Description Part Number STAX SMT Coax Connector Assembly: 619229-1Consists of STAX Coax elastomer in round SMT holder Mating SMT Target Holder: 619238-2Controls alignment between PCBs STAX Coax RF Elastomer only: 1442004-1Used with customer furnished holder Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. Part Number 619229-1 SMT STAX Coaxial Connector Assembly 2.40 [.094] 2.50 ± 0.20 [.098 ± .008] Mated Condition 4.00 [.157] Conductive Elastomer Outer ConductorConductive Elastomer Inner Conductor Non-conductive Elastomer 2.40 [.094] 3.20 [.126] Unmated 2.20 [.087] 0.40 [.016] 0.40 [.016] 0.55 [.022] Center Conductor Dielectric Material Board Outer Conductor Solder Ring Solder Mask 1.60 [.063] 3.20 [.126] 3.50 [.138] 4.30 [.169] PCB Pattern Part Number 619238-2 SMT Mating Target Holder 5.00 [.197] 1.50 [.059] 0.55 [.022] Center Conductor Dielectric Material Board Outer Conductor Solder Ring Solder Mask 1.60 [.063] 3.60 [.142] 4.20 [.165] 5.00 [.197] PCB Pattern For Mating Target

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 SMT/QuickGrip Connectors Product Facts ■ Solderless Cable Termination ■ 3.0 [.118] Mated Height ■ Excellent Cable Retention ■ Usable With Flexible and Semi-Rigid Micro-Coaxial Cables ■ Tape and Reel Packaging Tyco Electronics revolution- ary SMT/QuickGrip product line is designed to meet the growing demand for a reli- able, low cost system for direct termination of coax to a printed circuit board (PCB). SMT/QuickGrip technology eliminates the requirement to connectorize the coaxial cable, reduc- ing assembly times and, therefore, cost. The SMT/QuickGrip surface mount device occupies less PCB area than conventional through hole coaxial con- nectors. An innovative microstrip mounting pattern and cable receptacle design ensures excellent grounding and PCB reten- tion. The SMT/QuickGrip cable termination system stands a mere 3.0 [.118] off the board when mated, allowing for closer pitch/ spacing when designing a system. The SMT/QuickGrip design provides optimal cable retention for applica- tions where shock, vibra- tion, and/or cable flexure may be encountered. This unique RF design accepts both flexible and semi-rigid micro-coaxial cables while delivering exceptional RF performance up to 3GHz. These features make this system extremely versatile for design engineers and offer a reliable, cost effective alternative to direct solder- ing of cable to the PCB. The cable is inserted into the device by means of a sim- ple self-aligning hand tool, eliminating the requirement for skilled personnel. This system removes the possi- bility of damaged PCBs and cables which are common quality issues associated with direct solder, while pro- viding superior RF perform- ance. The SMT/QuickGrip accommodates multiple cable insertions allowing easy replacement of cables for repairs. This receptacle is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for pick and place board assembly. Pre- stripped cables and inter- series cable pigtails are available as turnkey solu- tions for your application needs (i.e.: for use in multi-board applications, for connecting antennas to the PCB, or point to point trans- mission on the same PCB). The SMT/QuickGrip cable termination system is ideal for wireless surface mount applications in handsets, pagers and personal digital assistants (PDA). The SMT/QuickGrip mechanical and electrical performance, coupled with its ease of use, ensure it to be a high quality, reliable solution for current and future interconnect needs. Tyco Electronics is an ISO9001 certified manufac- turer and maintains an SPC controlled manufacturing environment. Please call your local Sales or Distribution office for additional information and qualification samples today. Cable Conductor Cable Dielectric Cable Braid Cable Jacket 6.4 [.250] Ref. 3.2 [.120] Ref. PWB 3.0 [.120] Ref. PWB 3.0 [.120] Ref.2.1 [.083] Ref. 1.3 1.26 1.22 1.18 1.14 1.1 FREQUENCY (GHz) VSWR Typical VSWR using SMT/QuickGrip with Omni-Flex 200 Cable RF Coax Connectors Omni-Flex 200 cable is a Tyco Electronics specified cable.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMT/QuickGrip Connectors (Continued) General Materials Housing: Polyphenylene Sulfide (PPS) Contacts: Copper Alloy Finishes Contacts: Gold Plate over Nickel Electrical Frequency Range: DC - 3GHz Impedance: Usable with 50 & 75 Ohm systems Insertion Loss: .08 √ƒGHz DWV: 750 VRMs VSWR: 1.3:1@ 3GHz (Omni-Flex 200 and .047 [.002] Semi-Rigid) 1.4:1 @ 3GHz (.034 [.001] Semi-Rigid) Mechanical Connector Durability: 5 mating cycles min. (receptacle only) Tape and Reel Packaging: 16 [.629] per EIA-481 Force to Disengage by Cam-Out (grams): Omni-Flex 200 Cable - 543 typical .034 [.001] Semi-Rigid - 852 typical .047 [.002] Semi-Rigid - 1066 typical Environmental Temperature Rating: –40°C(–40°F) to 125°C(257°F) when mated with Omni-Flex 200 Cable Resistance to Solder Heat: Infrared, convection, and vapor phase solderable (receptacle only). Maximum reflow time/temperature not to exceed 260°C for 3 minutes. Cable Information Omni-Flex 200 Cable Materials: FEP Flexible Cable (200°C) Jacket: Fluorinated Ethylene Propylene Shield: Silver plated copper wire, 44 AWG, 90% min. coverage Dielectric: PTFE (Polytetrafluoroethylene) Center Conductor: Silver Plated Copper Clad Steel, 30 AWG Minimum Bend Radius: 6.35 [.250] Insertion Loss (PVC and FEP cable only): 1.3dB/m, 0.4 dB/ft. @ 500 MHz 2.0dB/m, 0.5 dB/ft. @ 1 GHz 3.0dB/m, 0.9 dB/ft. @ 2 GHz Center Conductor Resistance: .26 Ohms per foot average Specifications Strip Dimensions Tyco Electronics Omni-Flex 200 Cable Part Number 1407578-1 Ø 1.30 [.051] Ref. Leave Jacket Slug On To Protect Braid Ø 0.87 [.034] or Ø 1.19 [.047] Ref. Semi-Rigid Cable (.034 and .047) Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. Omni-Flex 200 cable is a Tyco Electronics specified cable.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMT/QuickGrip Connectors (Continued) Recommended Mounting Pattern for Microstrip Line Pick and Place Feature Ground Contact Center Contact 6.4 [.250] 0.5 [.020] 3.2 [.125] Center Contact Terminal 3.0 [.120] 3.4 [.135] 0.6 [.025] 1.3 [.050] 1.3 [.050] Circuit Line Ground Pad Area Free of Solder MaskCopper 0.5 [.020] 7.8 [.305] 2.5 [.100] 3.8 [.150] 1.3 [.050] 2.4 [.096] 3.4 [.133] 9.0 [.345] 1.3 [.050]2.4 [.095] 1.5 [.058] Via. 4.3 [.169] 2 Plcs. 0.6 [.024] 2 Plcs. Ø 0.5 [.020] 5 Plcs. 1.0 oz. [.0014] Description Part No. Bulk Packaged 100/bag 1085456-1

700 Piece Reel 1086008-1

2000 Piece Reel 1086009-1

1. Printed wiring board material: glass epoxy FR-4 or similar, relative permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.6 [.062] board thickness. Part No. 1088313-1 Cable Insertion Tool PC Board Mount Receptacle Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMT/QuickGrip Connectors (Continued) Inter-Series Cable Assemblies SMA Straight Plug Length A 19.2 [.755] Ref. SMA Bulkhead Jack Length A 21.3 [.837] Ref. 6.00 [.235] Min. 6.40 [.250] Recommended Mounting Hole Min. Cable Assembly Length (A) Part No. 100 [4] 1329174-1 Omni-Flex 200 200 [8] 1329174-2 305 [12] 1310432-1 Note: 1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In], Cable Assembly Length (A) Part No. 100 [4] 1329175-1 Omni-Flex 200 200 [8] 1329175-2 305 [12] 1329175-3 Note: 1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In], Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. Omni-Flex 200 cable is a Tyco Electronics specified cable.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SMT/QuickGrip Connectors (Continued) SMB Bulkhead Jack Length A 17.1 [.675] Ref. SMB Right-Angle Plug Length A 12.7 [.500] Ref. 10.8 [.427] 14.0 [.550] Cable Assembly Length (A) Part No. 100 [4] 1255378-4 Omni-Flex 200 200 [8] 1255378-5 305 [12] 1255378-6 Note: 1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In], Cable Assembly Length (A) Part No. 100 [4] 1408050-4 Omni-Flex 200 200 [8] 1408050-5 305 [12] 1408050-6 Note: 1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In], Inter-Series Cable Assemblies (Continued) 4.40 [.172] 4.90 [.192] Min. Min. Recommended Mounting Hole MCX Bulkhead Jack Length A 16.8 [.662] Ref. 4.80 [.189] 11.4 [.447] Ref. Ø 4.90 [.192] Recommended Mounting Hole Min. 4.50 [.177] Min. Min. Cable Assembly Length (A) Part No. 100 [4] 1408051-4 Omni-Flex 200 200 [8] 1408051-5 305 [12] 1408051-6 Note: 1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In], MCX Right-Angle Plug Length A 10.8 [.425] Ref. 7.90 [.312] 6.10 [.241] Cable Assembly Length (A) Part No. 100 [4] 1330401-4 Omni-Flex 200 200 [8] 1330401-5 305 [12] 1330401-6 Note: 1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In], Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. Omni-Flex 200 cable is a Tyco Electronics specified cable.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SSMT Surface Mount Interconnect System Microminiature Surface Mount RF Connectors Product Facts ■ 3.0 [.118] mated height ■ Excellent interface retention ■ Flexible micro-coax cable ■ 360 degree mated rotation ■ Tape and Reel packaging available The Tyco Electronics SSMT surface mount Interconnect System is designed to pro- vide superior electrical and mechanical performance for wireless communication applications. The SSMT system occupies less printed circuit board (PCB) real estate than conven- tional through hole coaxial connectors. An innovative microstrip mounting pattern and plug receptacle design ensure reliable grounding and PCB retention characteristics. The SSMT Interconnect System allows closer pitch/spacing, standing 3.0 [.118] (fully mated height) off the board. The mated SSMT interface allows 360 degrees of rotation providing maximum PCB design flexibility. It has been designed to pro- vide optimal retention for applications where shock, vibration or cable flexure may be encountered. Force to disengage by cable load (cam-out) exceeds 300 grams. The SSMT system is designed to provide the performance of much larger industry standard connec- tors. The SSMT Interconnect System consistently achieves broad band elec- trical performance through

6 GHz with a maximum

VSWR of 1.20:1 at 2 GHz. This broad band perform- ance establishes a reliable interface that can be utilized for future system upgrades without concern for perform- ance degradation. The SSMT utilizes a common plug receptacle, part num- ber 1251802-1, which is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for automatic pick and place board assembly. The mating cable jack is available terminated to a highly flexible micro- coax cable as either a pigtail, jumper or standard interseries connector assem- bly to meet your needs. The SSMT Interconnect System can be manually mated, facilitating high volume assembly and elimi- nating the need for special engagement tooling. The SSMT interface design aligns the center contacts prior to full mating to ensure a robust mechanical engagement. Interface durability is rated at 100 mating cycles.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) General Materials SMT Plug Housing: Polyphenylene Sulfide (PPS) Contacts: Copper Alloy SSMT Cable Jack Outer Contact: Beryllium Copper Inner Contact: Beryllium Copper Dielectric: Polypropylene, GF Finish Plug and cable jack - Contacts: Gold plate over nickel plate Electrical Frequency dc - 6 GHz Nominal Impedance 50 Ohms Voltage Rating 250 Volts (VRMS Maximum) @ Sea Level VSWR (Mated Pair) 1.20:1 Maximum @ 2 GHz 1.40:1 Maximum @ 6 GHz Insulation Resistance 5000 Megohms Minimum Dielectric Withstanding Voltage 500 Volts (VRMS Minimum) @ Sea Level Contact Resistance (Connectors Only) Center Contact 15 milliohms Maximum Outer Contact 10 milliohms Maximum Insertion Loss (Connectors Only) .15dB Max. @ 6 GHz Mechanical Connector Durability 100 mating cycles Tape/Reel Packaging (Plug) 12mm per EIA-481 Force to Disengage by 300 Grams Min. (800 Grams typ. initial mate) Cable Load (camout) Environmental Temperature Rating (Mated Pair) –40°C (–40°F) to +125°C (257°F) Resistance to Solder Heat Infrared, convection and vapor phase solderable (plug only). Maximum reflow time/temperature not to exceed 260°C for 3 minutes. Cable Specifications Materials Jacket: FEP (polytetrafluoroethylene) Shield: Silver plated copper wire, 44 AWG, 90% min. coverage Dielectric: PTFE ( polytetrafluoroethylene) Center Conductor: Silver plated copper clad steel, 30 AWG Minimum Bend Radius 6.35mm (.250 inch) Insertion Loss (Cable Only) 0.5 dB/ft., 2.0 dB/m @ 1 GHz 0.9 dB/ft., 3.0 dB/m @ 2 GHz Center Conductor Resistance .25 Ohms per foot average. 819 milliohm/meter Nom.; 250 milliohm/Ft. Nom. Dia. Ref. Outer Jacket Shield (Braid) 1.3 [.052] Dia. Ref.1.0 [.040] Dia. Ref.0.8 [.030] Dia. Ref.0.3 [.010] Center Conductor Dielectric Specifications

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Straight SMT PCB Mount Plug Receptacle Recommended Mounting Pattern for Microstrip Line Right-Angle Jack to Jack Cable Assembly 3.4 [.132] Ref. 2.1 [.081] Ref. SSMT Jack 5.3 [.208] Ref. 1.3 [.052] Ref. Cable 2.5 [.100] Dia. Ref. Length A Centerline to Centerline 5.0 [.197] 1.0 [.039] 4 Plcs. 4.5 [.177] 2.1 [.081] 4.0 [.157] 4.5 [.177] Center Contact Terminal 0.4 [.015] 2.1 [.049] 3.0 [.118]0.6 [.025] 0.5 [.020] 4 Plcs. Center Contact (Pin) Outer Contact Center Contact Terminal Ground Terminal (3 Plcs.) Notes: 1. Printed wiring board material: glass epoxy. FR-4 or similar, rela- tive permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.6 [.062] board thickness. Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Length A Tolerances. Length A Tolerance 101 To 500 [3.98 to 19.69] ± 5 [± .20] 2. Connector centerlines align ± 30° as shown for lengths of 165 [6.5] or less. Cable assemblies over 165 [6.5] have randomly aligned connectors. 9.0 [.354] 7.0 [.274] 6.0 [.236] 3.3 [.128] 0.5 [.019] 3.0 [.118] 0.5 [.020] VIA Holes 3 Plcs. 1.6 [.064] (See Note 2) 1.2 [.047] 1.2 [.047] 0.6 [.024]1.2 [.047] 5.3 [.207] 2.9 [.113] (See Note 2) Area Free of Solder Mask 1 oz. [.0014] Copper 1.2 [.047] 3.3 [.128] Packaging Quantity Part No. Bulk Multiple of 100 1251802-1 178 Dia. Taping 800 pcs/reel 1083946-17.0 330 Dia. Taping 3000 pcs/reel 1055689-113.3 Assembly Length (A) Part No. 100 [4.0] 1064524-1 200 [8.0] 1064530-1 305 [12.0] 1064533-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Right-Angle Jack to Jack Cable Assembly (180° Offset) 2.1 [.081] 5.3 [.208] Length A Centerline to Centerline Ref. 1.3 [.052] Ref. CableSSMT Jack Ø 2.5 [.100]Ref. Assembly Length (A) Part No. 100 [4.0] 1082845-1 Assembly Length (A) Part No. 100 [4.0] 1064535-1 200 [8.0] 1064538-1 305 [12.0] 1064540-1 510 [20.0] 1064542-1 Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Cable length tolerance: Length A Tolerances. Length A Tolerance 101 To 500 [3.98 to 19.69] ± 5 [± .20] 2.To avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Cable length tolerance: Length A Tolerances. Length A Tolerance 101 To 500 [3.98 to 19.69] ± 5 [± .20] 2. To avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. Right-Angle Jack Cable Pigtail 5.3 [.208] Length A Centerline to Cable End Ref. 2.5 [.100] Dia. Ref. 1.3 [.052] Ref. CableSSMT Jack 3.4 [.132] Ref. 2.1 [.081] Ref. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Inter-Series Cable Assemblies SMA Straight Plug Reference Plane to Centerline Length A Dia. Ref. Cable 1.3 [.052] Ref.19.2 [.757] Ref. SSMT Right Angle Jack 2.1 [.081] Ref.3.4 [.132] Dia. Ref.2.5 [.100] Notes: 1. Consult Tyco Electronics for non-standard cable lengths: Length A Tolerances. Length A Tolerance 101 To 500 (3.98 to 19.69) ± 5 (± .20) 2. Connectors are randomly aligned unless otherwise noted. Note: 1064552-1 recommended for customer system verification. SMA Bulkhead Jack Hex.7.9 [.312] Dia. Min. 5.4 [.250] 6.0 [.235] Min. Length A Reference Plane to Centerline 1.3 [.052] Dia. Ref. Cable Ref.21.3 [.839] Ref. SSMT Right Angle Jack Recommended Mounting Hole 2.1 [.081] Ref.3.4 [.132] Dia. Ref.2.5 [.100] Max. Panel Thickness 3.2 [.125] Assembly Length (A) Part No. 100 [4.0] 1064543-1 200 [8.0] 1064552-1 305 [12.0] 1064560-1 Assembly Length (A) Part No. 100 [4.0] 1064544-1 200 [8.0] 1064553-1 305 [12.0] 1064561-1 Hex.6.4 [.250] Hex.7.9 [.312] 4.4 [.172] Min. Length A Reference Plane to Centerline 1.3 [.052] Dia. Ref. Cable Ref.17.1 [.675] 7.4 [.290] Ref. SSMT Right Angle Jack Re Mo 2.1 [.081] Ref.3.4 [.132] 2.5 [.100] Dia. Ref. Max. Panel Thickness 2.4 [.093] SMB Bulkhead Jack Dia. Min. 4.9 [.192] 4.4 [.172] Min. Ref. t k Recommended Mounting Hole 81] Assembly Length (A) Part No. 100 [4.0] 1064546-1 200 [8.0] 1064555-1 305 [12.0] 1064563-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Length A Centerline to Centerline 1.3 [.052] Dia. Ref. Cable 12.7 [.500] Ref. Ref. SSMT Right Angle Jack 2.1 [.081] Ref.3.4 [.132] 6.1 [.241] 7.9 [.312] Dia. Ref.2.5 [.100] MCX Right-Angle Plug Ref.101.6 [4.00]SSMT Disengagement Tool SSMT Plug to SMA Jack Adapter Ref.10.5 [.413] Across Flats SSMT Plug SMA Jack 5.5 [.218] Part No. 1221286-1 SSMT to SMA Between Series Adapters Part No. 1055696-1 SSMT Jack to SMA Jack Adapter Ref.12.9 [.508] Across Flats SSMT Jack SMA Jack 5.5 [.218] SSMT Jack to SMA Plug Ref.16.2 [.639] SSMT Jack SMA Plug SSMT Plug to SMA Plug Adapter Ref.13.7 [.538] SSMT Plug SMA Plug Inter-Series Cable Assemblies (Continued) Assembly Length (A) Part No. 100 [4.0] 1064550-1 200 [8.0] 1064559-1 305 [12.0] 1064567-1 SLIDE HORIZONTAL TO ENGAGE TOOL LIFT VERTICAL TO DISENGAGE CONNECTOR PRESS VERTICAL TO ENGAGE CONNECTOR OPTIONAL Use of Engagement/Disengagement Tool Note: The SSMT disengagement tool can be utilized as an optional engagement tool versus manual hand installation. Part No. 1055695-1 Part No. 1055694-1 Part No. 1055697-1 Length A Reference Plane to Centerline 1.3 [.052] Dia. Ref. Cable Ref.16.8 [.662] Ref. SSMT Right Angle Jack 2.1 [.081] Ref.3.4 [.132] 4.8 [.189] Dia. Ref. Dia. 2.5 [.100] 11.4 [.447] 6.4 [.250] Hex. Recom Mounti 6.4 [.250] Max. Panel Thickness MCX Bulkhead Jack Ref.1 Dia. Min. 4.9 [.192] 4.5 [.177] Recommended Mounting Hole Min. Assembly Length (A) Part No. 100 [4.0] 1064549-1 200 [8.0] 1064558-1 305 [12.0] 1064566-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors MMCX Microminiature Snap-On Connector Series Tyco Electronics’ micro- miniature snap-on connec- tors offer an excellent blend of size, durability and performance for emerging applications in GPS, PCS, automotive and wireless communications. An exten- sion of the popular MCX series, MMCX connectors are 35% smaller, offering even greater packaging density and weight reduc- tion. MMCX connectors are rated to 500 mating cycles. The snap-on interface facili- tates assembly, eliminating the need for a threaded connection, and ensuring full engagement. The forces to engage and disen- gage have been optimized to ensure ease of mating as well as to prevent damage to PCB solder connections. MMCX connectors are designed for broadband performance, DC-6 GHz, and can be utilized for future system upgrades without concerns for per- formance degradation. The non-slotted outer con- tact provides for minimal RF leakage. MMCX surface mount connectors are designed to withstand infrared reflow, convection and vapor phase soldering. Tyco Electronics MMCX con- nectors are fully mateable with competitive MMCX product and conforms to the CECC interface specifica- tions. They are available in a broad range of standard configurations, including PCB and panel mount, flexi- ble and semi-rigid cable. Tape and reel packaging is available on surface mount product to facilitate high vol- ume manufacturing. Other options can be reviewed as well, including additional cable sizes, and adapters. The MMCX connector series is a cost effective solution for the challenging demands of today’s commercial mar- ketplace. It offers one of the smallest conventional crimp terminations without special tooling. Call your local sales office or authorized distribu- tor for additional information or samples of the MMCX connector series. Product Facts ■ Snap-on interface facilitates assembly ■ 35% smaller than MCX Series ■ Designed for space saving applications up to 6 GHz ■ Conforms to CECC Specifications ■ Surface mount tape and reel for high volume 8.80 [.347] Ref. 16.62 [.655] Ref. MMCX SMB Material and Finish Shells — Brass Bodies — Brass , plated gold Center Contacts — (Male) — Brass, plated gold (Female) — Beryllium Copper, plated gold Dielectrics — PTFE Electrical Characteristics in accordance with CECC 22000 Frequency — dc – 6 GHz Nominal Impedance — 50 ohms Voltage Rating — 170 Volts (VRMS Max.) @ Sea Level VSWR — 1.25 : 1 Max. @ 6 GHz Insulation Resistance — 1,000 Megohms Min. Dielectric Withstanding Voltage — 500 Volts (VRMS Max.) @ Sea Level RF Leakage — -60 dB Min. @ 2.5 GHz Contact Resistance — Center Contact — 5 milliohms max. Outer Contact — 1 milliohm max. Mechanical Characteristics in accordance with CECC 22000 Connector Durability — 500 mating cycles Force to Engage — 18 Newtons Max. Force to Disengage — 6 Newtons Max. Center Contact Retention — 10 Newtons Min. Cable Retention — Axial — 45 Newtons Min. Rotational — 0.05 N-m Min. Environmental Characteristics in accordance with CECC 22000, Equivalent Test Conditions Temperature Rating — –55 to +155°C Vibration — MIL-STD-202, Method 204, Condition B Shock — MIL-STD-202, Method 213, Condition A Moisture Resistance — MIL-STD-202, Method 106 Thermal Shock — MIL-STD-202, Method 107, Condition B Note: Performance specifications are typical, but may not apply to all connector types. Related Product Data Product Specification — 108-2084 Sample Kit — 1654779

MMCX Microminiature Snap-On Connector Series (Continued) Cable Part No. RG 405 1408313-1 2.7 [0.11] 1.45 [0.06] Min. Min. 0.25 [0.01] 2.6 [0.10] Min. 1.05 [0.04]Max. 2.4 [0.09] Max. 2.41 [0.09] Min. 3.5 [0.14] 1.6 [0.06] 0.4 [0.02] Reference Plane 0.7 [0.03] Reference Plane Ref. MMCX Interface Dimensions Plug Jack Semi-Rigid Cable – Direct Solder Attachment Straight Cable Plug Ø 3.5 [0.14] 11.5 [0.45] Cable Part No. RG 405 1408314-1 Right-Angle Cable Plug 7.0 [0.28] 3.5 [0.14] 5.3 [0.21] 4.0 [0.16] 6.5 [0.25] Cable Part No. RG 178, 196 1408148-1 Captured Center Contact Flexible Cable – Crimp Attachment Straight Cable Plugs Ø 3.5 [0.14] 11.5 [0.45] Cable Part No. RG 174, 1408312-1188, 316 RD 316 1408312-2 Captured Center Contact Ø 3.8 [0.15] 15.9 [0.63] Cable Part No. RG 178, 196 1408149-1 RG 174, 188, 316 1408149-2 RD 316 1408149-3 Captured Center Contact Right-Angle Cable Plug 7.0 [0.28] 3.5 [0.14] 5.3 [0.21] 4.0 [0.16] 11.9 [0.47] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 219 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors MMCX Microminiature Snap-On Connector Series (Continued) 5.6 [0.22] 1.4 [.055] 1.6 [.063] 2.1 [.083] 0.8 [.031] 1.4 [.055] Ground Pad Typ. Signal Pad Part No. 1408150-1 Printed Circuit Board Straight Jack Receptacle Part No. 1408151-1 Right-Angle Jack Receptacle Ø 0.7 [.028] 3.8 [.150] 3.5 [.138] 6.8 [.268] 2.6 [.102] 4.75 [.187] 6.5 [.256] Reference Plane Part No. 1408496-1 Straight Plug Receptacle Ø 0.70 [.028] 4.50 [.177] 3.50 [.138] 2.80 [.110] 7.50 [.296] Part No. 1393757-7 Surface Mount Straight Jack Receptacle 2.6 [0.10] 5.0 [0.20] 5.0 [0.20] PC Board Part No. 1393757-6 Right-Angle Jack Receptacle 2.6 [0.10] 5.0 [0.20] 5.0 [0.20] PC Board 3.5 [0.14] Ø 0.7 [0.03] 3.5 [0.14] 4.5 [0.18] 7.5 [0.30] 2.6 [0.10]Reference Plane 1.27 [.050] Recommended Mounting Holes Ø 0.82 [.032] 2.54 [.100] Typ. Typ. 1.27 [.050] Recommended Mounting Holes Ø 0.82 [.032] 2.54 [.100] Typ. Typ. 1.27 [.050] Recommended Mounting Holes Ø 0.82 [.032] 2.54 [.100] Typ. Typ. Recommended Mounting Pattern Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

MMCX Microminiature Snap-On Connector Series (Continued) Part No. 1408152-1 Edge Mount Straight Jack Receptacle Part No. 1408120-1 Straight Plug Receptacle 2.8 [.110] 3.4 [.134] 3.5 [.138] 7.45 [.293] 7.40 [.291] Ø 0.70 [.027] 4.50 [.177] 2.80 [.110] 2.80 [.110] 7.45 [.293] 7.40 [.291] Ø 0.70 [.027] 4.50 [.177] 2.70 [.106] 4.60 [.181] 3.50 [.138] 4.50 [.177] 2.20 [.087] 7.50 [.296] 1.95 [.077] 1.10 [.043] Signal Pad Ground Pad Typ. 4.50 [.177] 3.40 [.134] 3.50 [.138] 1.40 [.055] Solder Pad Configuration Only 4.60 [.181] 3.50 [.138] 4.50 [.177] 2.20 [.087] 7.50 [.296] 1.95 [.077] 1.10 [.043] Signal Pad Ground Pad Typ. Solder Pad Configuration Only Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 221 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors UMCC — Ultraminiature Coax Connector and Cable Assembly Series Product Facts ■ Ultra low profile (2.0 mm or 2.5 mm maximum mated height) ■ Easy snap on/off mating ■ Small footprint on PCB (3 mm x 3 mm) ■ Excellent performance to ■ Surface mount and reflow solderable ■ Available on 0.80 mm and 1.37 mm dia. single shield, and 1.32 mm dia. double shield cable ■ Style A receptacles mate with HIROSE U.FL/U.FL(v) Series connectors ■ Style B receptacles mate with MURATA GSC Series connectors ■ Extremely low profile ■ Surface mount technology ■ 360° mated rotation ■ Excellent price-to- performance ratio ■ Wireless LAN, Mini PCI ■ Mobile Antenna/GPS/ Radio Systems ■ PDA/PCS/Cellular Handset applications ■ Wireless Communications systems (LAN, GSM, PCS, WCDMA, UMTS) ■ Remote measuring equipment Characteristic Impedance — Frequency Range — DC to 6 GHz VSWR (mated pair) — 1.30 max. DC to 3 GHz 1.40 max. 3 to 6 GHz (cable dependent) Insertion Loss (connectors only) — 0.24 dB max. DC to 6 GHz Rated Voltage —

60 VAC (rms) — standard receptacle

(Styles A, B) Dielectric Withstanding Voltage — 200 VAC, 50 Hz for 1 min. @ sea level Insulation Resistance — 500 Megohms min. Contact Resistance (connectors only) — 20 milliohms max. (Center) 10 milliohms max. (Outer, Plug) 10 milliohms max. (Outer, Receptacle) Mechanical and Environmental Characteristics Durability — 30 cycles — standard receptacle (Styles A, B) Disengagement Force — 2N min. perpendicular 4N min. orthogonal Center Contact Retention Force — 0.15N min. Tape/Reel Packaging (receptacle)— 12 mm carrier per EIA-481 Operating Temperature — –40°C to +90°C Material and Finish Shell — Phosphor bronze, plated gold or silver Male Center Contact — Brass or phosphor bronze, plated gold Female Center Contact — Brass or phosphor bronze, plated gold Insulator (Plug) — PBT (15% G.F .), black, UL94V-0 Insulator (Receptacle) — LCP , beige or black, UL94V-0 Related Product Data Product Specification — 108-2231 Sample Kit — 1-1773441-6 HIROSE is a trademark of Hirose Electric. MURATA is a trademark of Murata Electronics, Inc.

UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued) Material and Finish Center Conductor — 0.8 mm Dia. — Silver plated copper 1.32 mm Dia. — Silver plated copper 1.37 mm Dia. — Silver plated copper Center Conductor Size — 0.8 mm Dia. — Stranded 7/0.05 mm 1.32 mm Dia. — Stranded 7/0.08 mm 1.37 mm Dia. — Stranded 7/0.10 mm Dielectric — 0.8 mm Dia. — FEP or PFA 1.32 mm Dia. — FEP 1.37 mm Dia. — FEP Dielectric Size — 0.8 mm Dia. — 0.4 mm OD 1.32 mm Dia. — 0.66 mm OD 1.37 mm Dia. — 0.83 mm OD Shield — 0.8 mm Dia. — Silver plated copper braid 1.32 mm Dia. — Double SPL braid 1.37 mm Dia. — Silver plated copper braid Shield Coverage — 0.8 mm Dia. — > 90% 1.32 mm Dia. — > 90% (each braid layer) 1.37 mm Dia. — > 90% Jacket — 0.8 mm Dia. — FEP or PFA 1.32 mm Dia. — FEP 1.37 mm Dia. — FEP Jacket Size — 0.8 mm Dia. — 0.80 mm OD 1.32 mm Dia. — 1.32 mm OD 1.37 mm Dia. — 1.37 mm OD Mechanical Characteristics Minimum Bend Radius — 0.8 mm Dia. — 5 mm single bend, 30 mm continuous flexing 1.32 mm Dia. — 5 mm single bend, 30 mm continuous flexing 1.37 mm Dia. — 5 mm single bend, 30 mm continuous flexing Impedance (Ohms) — 0.8 mm Dia. — 50 ± 2 1.32 mm Dia. — 50 ± 2 1.37 mm Dia. — 50 ± 2 Velocity of Propagation — 0.8 mm Dia. — 70% 1.32 mm Dia. — 70% 1.37 mm Dia. — 70% CC Resistance (Ohms/KM) — 0.8 mm Dia. — 1450 1.32 mm Dia. — 560 1.37 mm Dia. — 354 Voltage Rating — 0.8 mm Dia. — 60 VAC 1.32 mm Dia. — 60 VAC 1.37 mm Dia. — 60 VAC Attenuation — See chart Cable Information Jacket Dielectric Center ConductorBraided Shield -10 Frequency (GHz) 1.37 mm OD 1.32 mm OD0.80 mm OD Attenuation (dB/m) UMCC Cable Attenuation 223 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors PCB Receptacles — Style B Printed Circuit Board H Max. Receptacle UMCC PCB Receptacle 1.8 [.071] 0.25 [.010] 2.6 [.102] 2.6 [.102] 2.1 [.083] 3.0 [.118] 1.15 [.045] 0.35 [.014] Ø 2.1 [.083] 1.9 [.075] 2.2 [.087] 1.00 [.039] Ref. 1.05 [.041] 1.0 [.039] 4.0 [.157] Ref. Cut Out Prohibition Area Ref. Ref. Ref. Ref. 0.6 [.023] Style Mates with UMCC Mated Height Description Part NumberConnector Type (H) BI 2.00 UMCC PCB Receptacle, 2500 Pc Reel 1775146-1.079 BI 2.00 UMCC PCB Receptacle, 500 Pc Bag 1775146-2.079 Recommended PC Board Layout UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued) PCB Receptacles — Style A Printed Circuit Board H Max. Receptacle UMCC PCB Receptacle 1.8 [.071] 0.25 [.010] 2.6 [.102] 2.6 [.102] 2.1 [.083] 3.0 [.118] 1.25 [.049] 0.35 [.014] Ø 2.0 [.079] 1.9 [.075] 2.2 [.087] 1.0 [.039] Ref. 1.05 [.041] 1.0 [.039] 4.0 [.157] Ref. Cut Out Prohibition Area Ref. Ref. Ref. Ref. 0.6 [.024] Style Mates with UMCC Mated Height Description Part NumberConnector Type (H) A II / III 2.00–2.50 UMCC PCB Receptacle, 2500 Pc Reel 1566230-1.079–.098 A II / III 2.00–2.50 UMCC PCB Receptacle, 500 Pc Bag 1566230-2.079–.098 Recommended PC Board Layout Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued) Standard Double Ended Cable Assemblies Printed Circuit Board H Max. Receptacle UMCC Connector Mated Height Cable Dia. Length Mates with Part NumberType (H) L PCB Rcpt. 2.00 0.80 100.00 Style B 1750109-1 I .079 .031 3.937 2.00 0.80 100.00 Style A 1750108-1 II .079 .031 3.937 2.50 1.32 100.00 Style A 1750107-3 III .098 .052 3.937 L 4.0 [.157] Ref. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 225 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued) Interseries Cable Assemblies UMCC Connector Mated Height Cable Dia. Length Description Part NumberType (H) 2.00 0.80 200.00 UMCC Plug to 1750110-7 II .079 .031 7.874 MCX Right-Angle Plug 20.0 [.787] 200.0 [7.874] Ref. 20.0 [.787] 200.0 [7.874] Ref. 20.0 [.787] 200.0 [7.874] Ref. 20.0 [.787] 200.0 [7.874] Ref. 20.0 [.787] 200.0 [7.874] Ref. UMCC to FME Plug UMCC to SMA Plug UMCC to MCX Right-Angle Plug UMCC to SMA Bulkhead Jack UMCC to MMCX Right-Angle Plug Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued) Adapters Extraction Tool Part Number 1775231-1 UMCC Connector Description Part NumberType UMCC Jack Receptacle to 1775228-1I SMA Plug UMCC Plug to SMA Jack 1775229-1 UMCC Jack Receptacle to 1775227-1II / III SMA Plug UMCC Plug to SMA Jack 1775230-1 14.0 [.551] 5.6 [.220]10.0 [.393] Ø 5.3 [.208] Ø 2.6 [.102] Ø 6.25 [.246] 1/4-36UNS Part Number 1775229-1 14.0 [.551] 5.6 [.220]10.0 [.393] Ø 5.3 [.208] Ø 2.5 [.098] Ø 6.25 [.246] 1/4-36UNS Part Number 1775230-1 10.60 [.417] 8.0 [.315] Hex. 1.10 [.043] Ø 1.90 [.074] Part Number 1775227-1 10.60 [.417] 8.0 [.315] Hex. 1.10 [.043] Ø 2.00 [.078] Part Number 1775228-1 100 [3.937] 30.00 [1.181] 4.50 [.177] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 227 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued) Tape and Reel Packaging Specifications Standard Receptacles Application Notes Mating/Unmating — Cable Plugs Mating/Unmating 1. To mate the connectors, insert the cable plug into the SMT receptacle, mak- ing sure the cable plug is as vertical as possible and the mating axis of both connectors are aligned. Do not insert on an extreme angle. 2. To unmate the connectors, insert the end portion of the extraction tool under the SMT receptacle con- nector flanges and pull off vertically in the direction of the mating axis. Permissible Load Do not apply excessive load to the cable after the connectors are mated. Please refer to the permissi- ble loads indicated in the figure to the right. Receptacle Pulling Tool Step 1 Step 2 Printed Circuit Board 4N Max. RF Coax Cable2N Max. 2N Max. 4.0 ± 0.1 [.157 ± .004] 2.0 ± 0.1 [.079 ± .004] 12.0 [.472] 1.75 [.069] 5.5 [.217] 8.0 [.315] 0.30 [.012] 1.60 [.063] Ø 1.50 [.059] Center Contact Ø 330 [12.99] Ø 13.0 [.512] 1.40 [.055] Dimensions Reel (2500 Pieces/Reel) Soldering Profile — SMT Receptacle Recommended Temperature Profile (Reference) 1. The preferred technique for mounting the SMT Receptacle package is to reflow solder the device onto a PCB (Printed Circuit Board). 2. The maximum temperature for the lead of PCB surface does not exceed 240°C. 3. The right reflow soldering profile is for reference and will modify under individ- ual different conditions. Hand Soldering (Reference only) 1. Soldering iron: The maximum temperature is 240°C. 2. Soldering period: within 5 seconds. Dimensions of Taping Heating peak 240°C – 3 seconds (130 to 165°C) Preheating 183°C Within 2 minutes 40 to 50 seconds TIME (°C) 260 240 220 200 180 160 140 120 100

80 TEMPERATURE

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Right-Angle Cable Plugs Note: Hex Crimp Dim. 3.25 [.128] A D F RG/U Dimensions Single Packed Bulk Packed Cable ADF L 1 L 2 Part No. Part No. SMD Switching Jacks H D L l Dimensions Diameter Part No.HL l D Other models upon request. For all dimensions, stencil and PCB recommended layout, see customer drawing. *Dim. l is the width of the connector on the PCB. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Switching SMD Jack Low Profile Part Number 619061-1, Part Number 619062-1, and Part Number 619072-1 2.70 ± 0.25 [.106 ± .010] 0.80 ± 0.05 [.031 ± .002] 8.00 ± 0.20 [.315 ± .008] 3.10 ± 0.10 [.122 ± .004] 2.40 ± 0.10 [.094 ± .004] 2.10 ± 0.10 [.083 ± .004] 0.42 ± 0.08 [.017 ± .003] A Ø 5.40 [.213] 0.20 ± 0.07 [.008 ± .003] Y A A Section A-A Detail YDetail X Ø 5.10 [.201] Ø 5.00 [.197] Ø 0.60 [.024] 4.30 ± 0.10 [.169 ± .004] 3.20 ± 0.10 [.126 ± .004] 1.70 [.067] 3.70 ± 0.10 [.146 ± .004] 3.80 ± 0.10 [.150 ± .004] 0.10 ± 0.020 [.004 ± .0008] Outer Shell Center Contact Dielectric Spring Second Signal Contact + 0.00 – 0.05 + .000 – .002 Ø 3.40 [.134 ] 3.10 ± 0.05 [.122 ± .002] Recommended PCB Layout 0.90 ± 0.05 [.035 ± .002] 3.65 ± 0.05 [.144 ± .002] R 2.70 ± 0.05 [.106 ± .002] 3.05 ± 0.05 [.120 ± .002] 2.70 ± 0.10 [.106 ± .004] 2.40 ± 0.10 [.094 ± .004] Ground Ground With Solder Stop Mask Signal With Solder Stop Mas k Area Without Trace Signal + 0.10 – 0.00 + .004 – .000 R 1.50 [.059 ] + 0.080 – 0.070 + .0031 – .0028 4.58 [.180 ] + 0.080 – 0.070 + .0031 – .0028 3.97 [.156 ] Plating Dim. A Part No. Gold 6.00 ± 0.10 619061-1.236 ± .004 Gold 4.50 ± 0.10 619062-1.177 ± .004 Gold 3.50 ± 0.10 619072-1.138 ± .004 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 231 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Switching SMD Jack ESD Protected Part Number 619133-3 Plating — Gold 2.35 [.093] 2.45 [.096] 4.60 ± 0.30 [.181 ± .012] 3.70 ± 0.25 [.146 ± .010] R 1.40 [.055] Max. 1.64 [.065] 3.20 [.126] 0.80 [.031] 6.30 ± 0.10 [.248 ± .004] Ø 5.40 ± 0.10 [.213 ± .004] 0.25 ± 0.10 [.010 ± .004] 7.00 [.276]8.00 [.315] Center Contact Dielectric Spring Spring Contact Second Signal Outer Shell 0.50 [.020] A A Section A-A Recommended PCB Layout 0.90 ± 0.05 [.035 ± .002] 3.65 ± 0.05 [.144 ± .002] 3.05 ± 0.05 [.120 ± .002] 2.70 ± 0.10 [.106 ± .004] 2.40 ± 0.10 [.094 ± .004] Ground Ground With Solder Stop Mask Signal With Solder Stop Mas k Area Without Track Signal + 0.10 – 0.00 + .004 – .000 R 1.50 [.059 ] + 0.05 – 0.00 + .002 – .000 R 2.70 [.106 ] + 0.080 – 0.070 + .0031 – .0028 4.58 [.180 ] + 0.05 – 0.00 + .002 – .000 3.10 [.122 ] + 0.080 – 0.070 + .0031 – .0028 3.97 [.156 ] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Switching SMD Jack ESD Protected 4.1mm Height Part Number 619201-1* Plating — Gold 3.45 [.136] 4.10 [.161] Mated Position Unmated Position 3.88 [.153] 1.07 [.042] 0.70 [.028] 45° 0.70 [.028] 4 Plcs. Ø 5.00 [.197] 1.80 [.071]Spring Contact Center Contact Outer Shell Dielectric 1.80 ± 0.20 [.071 ± .008] Ø 4.40 ± 0.20 [.173 ± .008] Ø 5.80 ± 0.20 [.228 ± .008] R 0.28 [.011] Ø 0.56 [.022] + 0.00 – 0.05 + .000 – .002 Ø 3.40 [.134 ] + 0.15 – 0.10 + .006 – .004 1.00 [.039 ] 1.60 [.063] 1.50 [.059] 1.00 [.039] 2.50 [.098] 5.00 [.197] Recommended PCB Layout Ø 4.35 [.171] Ø 6.20 [.244] 0.80 [.031] Switching SMD Jack Mid Part Number 619075-1 Plating — Gold 5.50 ± 0.10 [.217 ± .004] Ø 5.00 ± 0.10 [.012] Spring Contact Dielectric, Unplated Dielectric, Plated 2.90 [.114] 0.40 [.016] B B D Section B-B 3.50 [.138] 2.80 [.110] 1.00 [.039] 0.20 [.008] 60° 38° Ø 4.20 [.165] Ø 2.50 [.098] 0.40 [.016] D 1.85 [.073] 1.90 [.075] 0.70 [.028] 0.80 [.031] R 0.20 [.008] Section D-D R 1.75 [.069]R 2.50 [.098] 1.60 [.063] 0.10 ± 0.02 [.039 ± .001] 2.40 ± 0.10 [.094 ± .004] 0.50 ± 0.05 [.020 ± .002] 0.40 [.016] Sq. 0.70 [.028] 1.25 [.049] *Mirrored Version of Part Number 619201-1 Also Available Under Part Number 619231-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 233 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Nano Switching Coax Part Number 619213-1 Plating — Gold 0.45 [.018] 0.60 [.024] 1.45 [.057] Ø 1.92 ± 0.15 [.076 ± .006] Ø 0.55 [.022] 1.70 ± 0.15 [.067 ± .006] 2.70 ± 0.15 [.106 ± .006] 2.70 ± 0.15 [.106 ± .006] 3.00 ± 0.05 [.118 ± .002] Recommended PCB Layout 0.55 ± 0.05 [.022 ± .002] 1.55 ± 0.05 [.061 ± .002] 2.65 ± 0.05 [.104 ± .002] 2.90 [.114] 1.25 ± 0.05 [.049 ± .002] 0.30 ± 0.05 [.012 ± .002] 1.05 ± 0.05 [.041 ± .002] 1.25 ± 0.05 [.049 ± .002] Right-Angle Cable Plug For Micro Switching Coax Connector Cable RG 316/ RG 174 Part Number 619211-2 Plating — Gold 5.10 [.201] Sq. Lid Shell Angle Ferrule Center Contact Snap Spring Outer Shell Dielectric 4.80 [.189] Ø 3.50 [.138] 7.00 [.276] 10.40 [.409] 2.00 [.079] 8.10 [.319] 2.20 [.087] Ø 3.00 [.118] Ø 0.70 [.028] Micro Switching Coax Connector Part Number 619196-1 Plating — Gold 3.00 [.118] 1.30 [.051] 3.00 ± 0.20 [.118 ± .008] 2.50 [.098] 1.54 [.061] 1.80 [.071] 0.80 [.031] Ø 3.00 [.118] Ø 1.70 [.067] Section A-A A A Ø 0.80 [.031] Dielectric, Plated Dielectric, Unplated Contact Spring 3.40 [.134] Recommended PCB Layout 1.70 [.067]0.70 [.028] Output Signal Ground Input Signal 3.20 [.126] 1.40 [.055] 0.90 [.035]1.00 [.039] 0.70 [.028] Copper Clearance Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Protected Front Contact Cable Plug Part Number 5-619028-1, Part Number 5-619078-1, and Part Number 5-619137-1 Ø 9.60 [.378] Lid Spring Support WasherShell Angle Ferrule Safety Ring Center Contact Outer Shell Dielectric Spring 3.40 [.134] A Ø 9.60 [.378] 7.35 [.289] 5.10 [.201] Protected Front Contact Cable Plug With Cylindrical Interface Part Number 5-619076-2 Plating — Gold Bulk packaging. 5.00 ± 0.25 [.197 ± .010] Ø 3.50 ± 0.025 [.138 ± .0010] Ø 9.60 [.378] Lid Spring Support Washer Shell Angle Ferrule Safety Ring Dielectric Center ContactOuter ShellSpring 7.35 [.289] 5.10 [.201] 15.60 [.614] 10.92 [.430] 6.62 [.261] 5.67 [.223] + 0.110 – 0.010 + .0043 – .0004 Ø 2.50 [.098 ] Ø 10.00 [.394] Ø 6.50 [.256] Dielectric 1/4" - 36 UNS-2A 35.00 [1.378]22.00 [.866] Outer Shell Dielectric Safety Ring Center Contact 7.00 [.276] 13.00 [.512] 6.62 [.261] 5.47 [.215] Ø 3.40 [.134] Cable Plug/ SMA Jack Adapter Part Number 619052-1 Plating — Gold Ø 10.00 [.394] Ø 6.50 [.256] Dielectric 1/4" - 36 UNS-2A 35.00 [1.378]22.00 [.866] Outer Shell Dielectric Safety Ring Center Contact 7.00 [.276] 13.00 [.512] 6.62 [.261] 5.47 [.215] Ø 3.40 [.134] Ø 8.18 [.322] Cable Plug/ SMA Jack Adapter With Conical Flange Part Number 619068-1 Plating — Gold Plating Dim. A Part No. Gold 10.92 5-619028-1.430 Gold 14.90 5-619078-1.587 Gold 10.92 *5-619137-1*.430 Bulk packaging. *Outer conductor without slot. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 235 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Adapter SMA Jack — MSC Test Plug With Conical Flange Part Number 619210-1 Plating — Gold Ø 10.00 [.394] Ø 6.50 [.256] Dielectric 20° 1/4" - 36 UNS-2A 22.00 [.866] Outer Shell Dielectric Center Contact 7.00 [.276] 2.90 [.114] 2.20 [.087]11.40 [.449] Ø 3.00 [.118] Ø 0.70 [.028] R 0.35 [.014] Ø 8.18 [.322] + 0.17 – 0.12 + .007 – .005 13.00 [.512 ] Adapter SMA Jack — NSC Test Plug With Two-Hole Flange Part Number 619214-1 Plating — Gold + 0.10 – 0.00 + .004 – .000 Ø 2.60 [.102 2 Plcs. ]8.00 ± 0.10 [.314 ± .004] A A 14.00 ± 0.10 [.551 ± .004] Ø 20.00 ± 0.10 [.787 ± .004] Ø 3.40 ± 0.10 [.134 ± .004] Center Contact Pin 1.00 ± 0.10 [.039 ± .004] 28.20 ± 0.30 [1.110 ± .012] Ø 7.00 ± 0.10 [.276 ± .004] Ø 7.50 ± 0.20 [.295 ± .008] Ø 5.00 ± 0.10 [.197 ± .004] 6.00 ± 0.10 [.236 ± .004] 18.70 ± 0.20 [.736 ± .008] 8.70 ± 0.20 [.343 ± .008] Dielectric Flange Center Contact Female Dielectric Outer Shell Ø 10.00 [.394] Ø 6.50 [.256] Dielectric 1/4" - 36 UNS-2A 35.00 [1.378]22.00 [.866] Center ContactOuter Shell 7.00 [.276] 13.00 [.512] Ø 0.60 [.024] Ø 5.40 [.213] + 0.020 – 0.080 + .0008 – .0031 Ø 3.40 [.134 ] Switching SMD Jack/ SMA Jack Adapter Part Number 619053-1 Plating — Gold Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Quick Snap Stripline (QSL) Coaxial Connector Coaxial Cable Displacement Interface ■ Low profile ■ Highly reliable ruggedized interface ■ Surface mount technology ■ Excellent price-to- performance ratio ■ Platform expandable to include multi-port versions and other customization Product Facts ■ Surface mount compatible ■ RoHS compliant (lead-free SMT process [260° C] compatible) ■ PCI / PCI Express compatible ■ Designed for RG 174 & RG 316 Cable, and easily adaptable to other cable types ■ Overall Height < 10 mm ■ Can be packaged to meet IP67 Sealing ■ 10mm x 10.6mm max. footprint (w/o panel extension) ■ Cost effective solution to standard screw machine RF connectors ■ PCI, Mini PCI, PCI Express ■ Mobile Antenna/GPS/Radio Systems/RFID ■ PDA / PCS / Cellular Handset applications ■ Wireless Communications systems ■ Satellite Communications, Broadcast, Multimedia ■ Automotive Telematics Specifications Characteristic Impedance — Frequency Range — Dc to 6 GHz VSWR — 1.3 Max to 3 GHz,

1.5 Max to 6 GHz

Rated Voltage — 60 VAC rms Dielectric Withstanding Voltage —

800 VAC, 50 Hz (at sea level)

Insulation Resistance —

100 Megohms min

Operating Temperature — –40 to +125°C Engagement Force — < 30 N Disengagement Force — < 20 N Cable Retention — 110 N Durability — 250 cycles 10.00 [.394] Max. 10.00 [.394] 13.50 [.531] Max. Max.Surface Mount Jack Receptacle 8.00 [.315] Max. 8.20 [.323] 24.00 [.945] 12.00 [.472]Max. Max. RG-174 Cable Plug Part Number 1274794-1 Part Number 1274795-1 Related Product Data Product Specification — 108-2224 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. PCI, PCI EXPRESS are trademarks of PCI SIG.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors DIN Inserts Coaxial inserts according to CECC 22 330 and high- current inserts (CECC spec- ification under preparation) can be used in conjunction with a DIN 41612 style M contact base (CECC 75 101-801), SIEDECON, and Z-PACK 2mm HM connectors. Coaxial inserts have a con- tact system based on the pin-socket principle with the same dimensions as the Series 1.0/2.3 coaxial con- nectors and are plug-com- patible. The product family is represented by various 50Ω and 75Ω styles that can be used far into the GHz range. The high mounting density (pitch between adja- cent contacts starting at 7.5 mm) and installation into the contact base, by means of a “snap-in” lock, make the inserts particularly well suited for applications. Due to the centering, – coaxial plugs are installed in contact bases with audio-frequency (AF) female contacts – coaxial jacks are installed in contact bases with AF male contacts. The high-quality materials used with coaxial inserts ensure a high grade of service even in an industrial atmosphere. Technical Data Electrical and mechanical characteristics of coaxial inserts in accordance with DIN

41626 Part 2 and CECC 22 330

Characteristic Impedance — 50/75 Ω Frequency Range — up to 2 GHz Reflection Factor Up To 2 GHz 1 — ≤ 0.10 Insulation Resistance — Initial value — ≥ 1 GΩ After stressing — ≥ 200 MΩ Screening Effectiveness — ≥ 70 dB Inner Conductor Contact Resistance After Stressing — ≤ 10 mΩ Outer Conductor Continuity After Stressing — ≤ 7.5 mΩ Voltage Proof 2 — Flexible Cables (RG 316) At sea level — 750 V, 50 Hz At 20 km altitude — 150 V, 50 Hz Working Voltage 2 — Flexible Cables (RG 316) At sea level — 350 V, 50 Hz At 20 km altitude — 65 V, 50 Hz Service Life — 500 cycles Climatic Category — 55/125/56 Notes

1 Guideline dimensions, depending

on cable type and connector style. with these connectors have lower characteristic values than speci- fied here. Product Facts ■ Meets requirements of DIN 41626 and CECC 22330 ■ Suitable for DIN 41612 Type M Connectors (Eurocard), Siedecon, and Z-PACK 2mm HM Connectors ■ Meets DIN Performance Level II ■ Crimp termination for inner and outer conductors (cable mount only) eliminates the need for solder ■ Right-angle and vertical style board mount pin and socket contacts ■ Board mount product avail- able with both solder and compliant tails ■ Straight cable mount pin and socket contacts for RG 316, and RG 179 cable ■ Contact impedance of 50 and 75 ohms for cable mount and 50 ohms for board mount

DIN Inserts (Continued) Coaxial Inserts,

50 Ohm

Vertical PC Board Mount, Compliant 5.50 [.216] Min. 12.21 [.480] Ref. 4.75 –0.03 [.187 –.001] 4.15 –0.012 [.163 –.0004] 1.15 +0.30 [.045 +.012] 5.10 [.200] Max. Sq. 45°0' Typ. 90°0' Typ. Typ.1.00 ±0.05 [.039 ±.002] 5.08 ±0.05 [.200 ±.002] 45°0' Typ. 90°0' Typ. Typ.1.00 ±0.05 [.039 ±.002] 5.08 ±0.05 [.200 ±.002] Right-Angle PC Board Mount, Compliant 17.75 [.700] Ref. /H11545 0.03 4.75 .187 /H11546 0.09 /H11001 .001 /H11002 .004 4.20 +0.075 [.165 +.003] 4.00 ±0.10 [.157 ±.004] 5.35 –0.30 [.216 –.012] 7.00 ±0.10 [.275 ±.004] 6.10 [.240] Max. Sq. Recommended PC Board Layout Type Housing Type Application Tooling Part No. Vertical PCB Socket, Z-PACK 2mm 904800-1 5148385-1Compliant HM Male Rt. Angle PCB Pin, Z-PACK 2mm 904805-1 5148386-1Compliant HM Female 904804-1 Support Anvil Recommended PC Board Layout Coaxial Inserts to SMA Adapters Coaxial Insert Plug to SMA Jack Coaxial Insert Socket to SMA Jack 19.1 [.755]Max. 7.92 ± 0.12 [.312 ± .005] Hex. 7.92 [.312] Hex. Part No. 1274192-1 Part No. 1274191-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 239 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors DIN Inserts (Continued) Dim A Ø Max. Cable Type Width Across Flats Part No.of Hex Profile A 9.6 [.378] 13.1 [.516] Ø 6.0 [.236] Ø 4.05 [.159] A 9.35 [.368] 13.1 [.516] Ø 6.0 [.236] Ø 4.75 [.187] Dim A Ø Max. Cable Type Width Across Flats Part No.of Hex Profile 2.6 RG 316 (50 Ω ) 3.2 1-1393668-219 .102 .126.748 2.67 RG 179 (75 Ω).105 Ø Max. Cable Type Width Across Flats Part No.of Hex Profile 2.6 RG 316 (50 Ω) 3.2 1392019-1.102 .126 2.67 RG 179 (75 Ω) 3.2 3-1393668-0.105 .126 Ø Max. Cable Type Width Across Flats Part No.of Hex Profile 2.6 RG 316 (50 Ω) 3.2 1392020-1.102 .126 2.67 RG 179 (75 Ω) 3.2 3-1393668-4.105 .126 Ø 5.8 [.228] 23.9 [.941] 9.6 [.378] 4.05 [.159] Ø 5.8 [.228] 23.9 [.941] 9.35 [.368] 4.75 [.187] Coaxial Inserts (50 Ω/75 Ω) Bulkhead Cable Jack for male connectors Bulkhead Cable Jack for female connectors Right-Angle Bulkhead Jack for male connectors Right-Angle Bulkhead Plug for female connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

DIN Inserts (Continued) Bulkhead Plug, PC Board connection for DIN 41612 M female connectors Coaxial Inserts (50 Ω/75 Ω) (Continued) 9.35 [.368] 17.9 [.705] 5.08 [.200] Ø 4.75 [.187] Ø 1.0 [.039] 2.54 [0.10] Recommended Mounting Hole Pitch Ø 1.0 [.039] 2.54 [0.10] Pitch Part No. 1-1393662-2 Right-Angle Bulkhead Plug, PC Board for SIEDECON female connectors Part No. 1-1393662-4 Right-Angle Bulkhead Jack, PC Board for DIN 41612 M male connectors 5.08 [.200] 17.9 [.705] 3.0 [.118] 6.9 [.272] 9.6 [.378] 4.05 [.159] 5.08 [.200] 17.8 [.701] 3.0 [.118] 6.9 [.272] 9.35 [.368] Ø 4.75 [.187] Recommended Mounting holes for Part No. 1-1393662-2 and 1-1393662-4 Part No. 1-1393662-0 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 241 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Size 8 Contacts Performance Characteristics Frequency Range —0 to 500 MHz Operating Voltage, Max. — 275 vac rms @ sea level Termination Resistance, Max. — Center Contact — 6.0 milliohms Outer Contact — 3.0 milliohms Insulation Resistance, Min. — 5,000 megohms @ 500 vdc Dielectric Withstanding Voltage — Sea Level — 800 Volts rms 30,000 ft [9,144 m] — 525 volts rms 70,000 ft [21,336m] — 275 volts rms VSWR to 500MHz, Max. Pin/Socket VSWR Straight/Straight 1.30 Right-Angle/Straight 1.35 Right-Angle/Right-Angle 1.40 RF Crosstalk — 90dB @ 5-500 MHz Mating Force, Max. — 4.0 lb [17.8 N] Unmating Force, Min. — 2.0 oz [0.556 N] Contact Retention — 20 lb [89 N] Contact Durability — 500 cycles Cable Force RG/U lb [N] 316, 188, 174, 20 89 179, 179A, 179B 188-type 35 155.8 Double-Braid 142, 142A, 142B 50 222.5 Operating Temperature— 55°C to +125°C Thermal Shock—5 5°C to +125°C per MIL-STD-1344, Method 1003, Cond. A Physical Shock — 50 G’s per MIL- STD-1344, Method 2004, Cond. A Vibration — MIL-STD-1344, Method 2005, Cond. II Moisture Resistance — 240 hours per MIL-STD-1344, Method 1002, Cond. II Salt Fog — 48 hours per MIL-STD- 1344, Method 1001, Cond. B Extraction Tool Numbers Subminiature D Housings — 58095-1 (AMPLIMITE) AMP-HDI Housings — 58095-2 Material Brass — per QQ-B-626 and MIL-C-50 Phosphor Bronze — per QQ-B-750 Beryllium Copper — per QQ-C-530 TEFLON—per MIL-P-19468 Nylon—per MIL-M-20693 Finish Bright Tin Plating— per ASTM-B-571 Copper Plating —p er MIL-C-14550 Gold Plating —p er MIL-G-45204 Nickel Plating — per QQ-N-290 Straight Contacts Pin Socket A Max. B Dia. Max. Alignment Ring for use in Subminiature D housing only A Max. B Dia. Max. Shell Dimensions Die 50 Ohm Non-Impedance MatchedRG/Cable Type AB Insert* Pin Socket Pin Socket 178, 178A, Brass 24.13 5.94 59993-1 — — 5228618-5 5228596-5178B,196, 196A .950 .234 174, 316, Brass 24.28 5.94 59993-1 5221980-1 — 5228618-1 5228596-1188, 188A .956 .234 179, 179A, 179B, 187, Brass 24.28 5.94 59993-1 — — 5228618-2 5228596-2187A, 161, .956 .234 BELDEN 9221 174, 316, 188, Brass 24.28 5.94 59993-1 — — 5228618-3 5228596-3Double Braid .956 .234 142, 142A, 142B, Brass 27.43 6.48 58212-1 — 5221981-2 5228618-4 5228596-4400, BELDEN 9246 1.08 .255 *For hand tool 69710-1 or pneumatic tool 69365-8. Note: Non-Impedance Matched and 50 Ohm are not intermateable. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Size 8 Contacts (Continued) PC Board Mount Contacts Recommended PC Board Layout Contact Part No. Type Non-Impedance Matched Right-Angle 5221162-1Socket Contact 1.02 ±0.08 [.040 ±.003] (5 Holes) Dia. 5.08 ±0.08 [.200 ±.003] 2.54 ±0.08 [.100 ±.003] 5.08 ±0.08 [.200 ±.003] 2.54 ±0.08 [.100 ±.003] Right-Angle Socket Contact 17.58 [.692] 6.50 [.256] 11.33 [.446] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 243 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors COAXICON Contacts Product Facts ■ Tyco Electronics provides a variety of contacts for coaxial connectors ■ Contacts are available in a range of sizes that may be used with the various types of coaxial cable on the market ■ COAXICON contacts are of the crimp, snap-in type and are available in the follow- ing designs: Miniature Contacts, Subminiature Contacts and Size 8 Contacts Miniature Contacts are designed for high density multiple circuit connector applications. A wide range of cable sizes is accommo- dated by using three sizes of outer shell termination ends and three sizes of contacts. Subminiature Contacts are used in high density applications and are ideal for mixing coaxial and other styles of pin and socket contacts in the same con- nector housing. Size 8 Contacts are com- patible with industry stan- dard size 8 connectors such as Subminiature D and AMP-HDI connector housings. Straight and right-angle styles, as well as pc board versions for AMP-HDI connectors are available.

Inner Dielectric — Polypropylene, nylon, or polymethylpentene, general purpose Retention Spring — Stainless steel per QQ-S-766 Ferrule — Copper per QQ-C-576 Performance Characteristics Insulation Resistance — 5000 megohms min Dielectric Withstanding Voltage — 1,000 volts rms for 1 minute Contact Resistance — 2.0 milliohms @ 1 ampere Low-Level Conductivity — 10 milli- volts DC min. VSWR — 1.3 to 1.0 @ 1,000 MHz max. Cable Retention — RG/U Retention Cable lbs [N] 58C 50 [222] 188A 30 [133] 180B 28 [125] 195A 16 [71] Durability — 500 cycles @ 10 cycles per minute max. Vibration —2 hrs. per MIL-STD-202, Method 201 Shock — 50 G’s per MIL-Std-202, Method 213, Cond. G Temperature Cycling —5 cycles per MIL-STD-202, Method 102, Cond C. Temperature Range — -55°C to +125°C Test Method for Electronic and Electrical Component Parts — MIL-STD-202 Material Outer Shell — Brass per MIL-C-50 Center Conductor — Brass per QQ-B-626, or Beryllium copper per QQ-C-533 Finish Outer Shell, Center Conductor — 0.00076 [.000030] gold over 0.00076 [.000030] nickel Retention Spring — Nickel per QQ-N-290 Ferrule — Bright tin per MIL-T-10727 Note: A ferrule and retention spring (201142-2) are required for each pin and socket. Extraction Tool No. 305183-8 Die Insert for Tools: Part NumbersRG/U Cable Ferrule Integral Die PRO-CRIMPER Hand Tool 69710-1 No. Hand Tool Pneu. 69365-2, Pin Socket69365-32 316, 188, 188A 328666-X —— 69227-2 201143-5 201144-5174 179, 179A, 179B 161, 187, 187A 328666 -X —— 69227-2 201143-1 201144-1 Belden 9221

188 Double Braid 221848-3 58290-1 — 69227-2 201143-5 201144-5316 Double Braid

122 328664 -X 45639-2 91912-3 69222-2 201145-1 — 180, 180A, 180B 195, 195A, 328664 -X 45639-2 91912-3 69222-2 201145-2 201146-2 21-597 Belden 8218 328664 -X 45639-2 91912-3 69222-2 201145-2 201146-2 58, 58A, 58B, 58C 328663 -X 45740-2 — 69220-2 201145-4 201146-4 141 330478-X 69248-4 — 69315-4 201145-4 201146-455, 55A, 55B, 223 124, 140, 210 62, 62A, 62B 329006 -X —— 69675-1 201097-1* 201098-1* 59, 59A, 59B Twisted Pair 24-22 AWG [0.2-0.4 mm2] 328666-X 91912-4 — 69672 -X 201143-5 201144-5(Stranded)1 Shielded Wire 328663-X 45740-2 — 69220-2 201145-4 201146-422, NAS-702, Class B Brand Rex T5788A 328664-X 45639-2 91912-3 69222-2 201145-2 201146-226 AWG [0.12-0.155 mm2]3 *These contacts are for use in the 4-position G Series connector modules only. 1Maximum insulation diameter–2.92 [.115] (two wires combined). 2Includes bench mount and foot control; requires Manual Take-Up Attachment No. 69689. Ferrules Pin Socket Retention Springs Part No. 201142-2 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 245 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Miniature PC Board Sockets Material Shell and Center Contact — Brass per MIL-C-50 and QQ-B-626 Dielectric — Polypropylene, or Polymethylpentene, general purpose Finish Center Contact —0 .00076 [.000030] gold over copper Shell — Gold plated per MIL-G-45204 Performance Characteristics Dielectric Withstanding Voltage — 1,000 volts, rms Impedance — Non-constant Operating Temperature Range— -55°C to +85°C 15.24 [.600] 2.54 [.100] 12.7 [.500] 2.54 [.100] 1.32 Dia. [.052] (5 Holes) Recommended Mounting Hole Layout Spring Latch Shell Center Conductor Locking Latch 2.54 Ref.[.100] 4.52 Dia. [.178] Ref. Spring Latch 2.54 Ref. [.100] 0.36 Ref. [.014] 1.27 Typ.[.050] 12.7 [.500] 2.54 [.100] 17.78 [.700] 1.02 Dia. [.040] A B 6.23 [.245] Type PC Board Retention Dimensions Part No.Thickness lb. [N] A B Note: For mateable Miniature Contacts, see page 245. Locking Latch Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Subminiature PC Board Sockets Material Shell and Center Contact — Brass per MIL-C-50 and QQ-B-626 Dielectric — Polypropylene, or polymethylpentene, general purpose Finish Center Contact — 0.00076[.000030] gold per MIL-G-45204 over copper per MIL-C-14550 Shell — Gold Performance Characteristics Dielectric Withstanding Voltage — 600 volts, rms Operating Temperature Range— -55°C to +85°C 1.09 Dia.[.043] #57 Drill (3 Holes) 10.16 [.400] 15.24 [.600] Recommended Mounting Hole Layout Locking Latch Shell Center ConductorSpring Latch 22.23 Max.[.875] Locking Latch 1.47 [.058] 0.84±0.2 [.033±.008] 10.16 [.400] 15.24 [.600] 0.84 Dia.[.033] 4.52 [.178] 3.05 ±.0.2 [.120 ±.008] Mating Subminiature COAXICON Pins These short Subminiature COAXICON Pins are recommended for use with any of the sockets listed above. Note: Alignment springs are not required for this application and are not included with the pin assemblies. Type PC Board Dim. Part No.Thickness L Spring Latch 1.57 2.54 226023-1.062 .100 Locking Latch 1.57 2.54 226060-1.062 .100 Integral Die Insert for Tools: RG/U Ferrule Hand Tool 69710-1 Part No.Cable No. Die Pneu. 69365-2,Hand Tool 69365-3 174 1-332056-0 91911-3 69690 -X 51563-8316, 188, 188A 179, 179A, 179B 1-332056-0 91911-4 69690-1 51563-8187, 187A 161 1-332056-0 69656-5 — 51563-8 A Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 247 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Selection Chart for Twisted Pairs and Shielded Wire Die Insert for Tools: Wire Size Hand Tool Contact Part NumbersIntegral Die PRO-CRIMPER 69710-1 Multimate Short Socket FerruleAWG [mm2] Hand Tool Pneu. Tool Pin Pin69365-2, 69365-3* 30 0.05 69656-2 — 69690-2 226537-3 51563-3 51565-3 1-332057-0(Twisted Pair, Solid) 28 0.08-0.09 — 91911-3 69690 - 226537-3 51563-3 51565-3 1-332057-0(Twisted Pair, Solid) 28 69690-1 (Twisted Pair, Stranded; 0.08-0.09 — 91911-4 or 226537-3 51563-3 51565-3 1-332057-0 (Twisted Pair, Solid or Stranded; 0.12-0.15 — 91911-3 69690 -2 226537-3 51563-3 51565-3 1-332057-0 (Shielded, 0.75 [1.91] 0.12-0.15 69656-3 — 69690-3 226537-1 — 51565-1 1-332057-0 Max. O.D.) *Includes bench mount and foot control. Extraction Tool 305183 Note: A ferrule is required for each pin and socket. Subminiature Contacts Material Outer Shell — Brass per MIL-C-50 Center Conductor — Beryllium copper per QQ-C-533 (Pin); Brass per QQ-B-626 (Socket) Inner Dielectric — Polypropylene, nylon, or polymethylpentene, general purpose Retention Spring — Stainless steel per QQ-S-766 Ferrule — Copper per QQ-C-576 Finish Outer Shell and Socket Center Conductor — 0.00076 [.000030] gold over 0.00127 [.000050] nickel Pin Center Conductor — 0.00076 [.000030] gold over 0.00254 [.000100] copper Ferrule — Bright tin per MIL-T-10727 A Pin Ferrule 16.51 Max.[.650] Socket Ferrule A = Multimate Pin 25.65 [1.010] Short Pin 22.66 [.892] Selection Chart for Coaxial Cable Integral Die Insert for Tools: Contact Part Numbers RG/U Cable Die PRO-CRIMPER Hand Tool 69710-1 Hand Tool Pneu. Tool 69365-2, Multimate Short Socket Ferrule69365-3* Pin Pin 178, 178A, 178B 69656-2 69690-2 226537-2 — 51565-2 1-332057-0196, 196A 196 69656-9 — 226537-2 — 51565-2 1-225088-1(Double Braid) 174, 316 — 91911-3 69690 -226537-1 — 51565-1 1-332056-0188, 188A 179, 179A, 179B 187, 187A — 911911-4 69690-1 226537-1 — 51565-1 1-332056-0 Belden 9221 RD-316 69656-7 — 226537-1 — 51565-1 1-225088-3 187 69656-8 — 226537-1 — 51565-1 1-225088-1(Double Braid) 161 69656-5 — 226537-1 — 51565-1 1-332056-0 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

■ Multiplex Systems ■ Base Stations ■ High Density Systems Product Facts ■ Multi Coax Surface Mount ■ Maximum packaging density ■ Component placement on both sides of PCB ■ Fully automated assembly (pick-and-place) ■ Modular design Technical Data ■ Interface: Series 1.0/2.3 ■ Impedance: 75/H9024 ■ International specifications: IEC 169-29 and CECC 22 230 ■ Frequency range up to 2 GHz ■ Compact grid pitch 10 [0.39] ■ Guaranteed coplanarity of max. 0.1 [0.004] ■ Integrated positioning pins for manual placement ■ Optional mechanical securing SIEMAX connectors com- bine the benefits of surface mount technology and mod- ular design. This multi coax connector is packaged in tape-and-reel for automatic placement, has optimum solder joints and 100% reflow suitability. This con- nector is ideal for systems requiring superior packag- ing density because it can be placed on both sides of the printed circuit board. The modular design pro- vides flexibility in terms of the number of poles offered (two- or three-poles). It can be stacked, enabling any required configuration to be produced. The SIEMAX connector also allows the use of any other connector series, e.g. SMB, is resist- ant to high temperatures, and is robust, with reliably sustained coplanarity. For General Information on Series 1.0/2.3 Connectors, see Page 129. 249 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors SIEMAX Connectors, Series 1.0/2.3 (75 Ohm) SIEMAX Connector, SMT Right-Angle Jack, 2 Poles 12.10 ± 0.05 [.476 ± .002] 1.90 ± 0.05 [.075 ± .002] 3.00 ± 0.05 [.118 ± .002] 5.10 ± 0.05 [.201 ± .002] 2.00 [.079] 2.00 [.079] 2.00 [.079] x 7 = 2.00 [.079] 8.00 [.315]x 4 = 14.00 [.551] 11.10 ± 0.05 [.437 ± .002] 17.50 ± 0.05 [.689 ± .002] 1.60 ± 0.05 [.063 ± .002] + 0.10 – 0.00 + .004 – .000 Ø 1.40 [.055 ] 0.05 [.002] 10 Plcs. 2.00 ± 0.05 [.079 ± .002] 2.80 ± 0.05 [.110 ± .002] 7.20 ± 0.05 [.283 ± .002] 13.00 ± 0.05 [.512 ± .002] + 0.10 – 0.00 + .004 – .000 1.90 [.075 ] 24.0 [0.94] 6.5 [0.26] Ø 4.15 [0.16] 18.0 [0.71] 10.0 [0.39] PC Board Layout Coupling type* Part No. C, F 6-1393696-2 *For coupling type see DIN 1.0/2.3 Section. 12.10 ± 0.05 [.476 ± .002] 1.90 ± 0.05 [.075 ± .002] 4.40 ± 0.05 [.173 ± .002] 5.10 ± 0.05 [.201 ± .002] 2.00 [.079] 23 Plcs. 23 Plcs. 2.00 [.079] 2.00 [.079] x 12 = 2.00 [.079] 8.00 [.315]x 4 = 24.00 [.945] 4.00 [.157] Ø 2.50 [.098] 11.10 ± 0.05 [.437 ± .002] 27.50 ± 0.05 [1.083 ± .002] 1.60 ± 0.05 [.063 ± .002] + 0.10 – 0.00 + .004 – .000 1.90 [.075 ] + 0.10 – 0.00 + .004 – .000 1.90 [.075 ] + 0.10 – 0.00 + .004 – .000 Ø 1.40 [.055 ] + 0.10 – 0.00 + .004 – .000 1.20 [.047 ] 0.05 [.002] 10 Plcs. 0.05 [.002] 13 Plcs. 20.00 [.787] 10.00 [.394] 2.00 [.079] 2.80 [.110] 17.20 [.677] 23.00 [.906] 24.0 [0.94] 6.5 [0.26] 3.5 [0.14] Ø 4.15 [0.16] 28.0 [1.10] 10.0 [0.39] 10.0 [0.39] PC Board Layout Coupling type* Part No. C, F 6-1393696-7 *For coupling type see DIN 1.0/2.3 Section. SIEMAX Connector, SMT Right-Angle Jack, 3 Poles Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Transmission Line Adapters provide convenient transi- tions between popular series coaxial connectors. The adapter design pro- vides a minimum length consistent with good electri- cal performance. The small size, low VSWR, and broad frequency coverage permits a wide range of applications in both measurement and systems use. Design and Construction The standard units are constructed of stainless steel with passivated finish, nickel plated brass, and gold plated brass. The material and plating is to be consistent with the basic connector series. All dielectrics are TFE fluoro- carbon. The center con- tacts are made of beryllium copper, gold plated. Types The straight in-line adapters are available in many combinations of plug and jack (male and female) con- figurations. Also, popular panel mount versions are cataloged. For special modifications and hermetic seal version, consult Tyco Electronics. Application The major application is the requirement for a low VSWR, compact transition in both test system and oper- ating systems. Many panel mount and bulkhead mount versions are available so the designer can use small size connectors for internal design, but adapt to a larger rugged version for external connection. Selection charts follow to help you find the correct adapter for your application. MCX Page 253 N Series Page 253 BNC Page 253 Series 1.6/5.6 Page 253 Page 253 SMA/SMA 18 GHz Page 253 Page 253 Page 253 Page 253 Page 253 Page 253 Page 253 Plug-Plug Jack-Jack QMA Series 1.0/2.3 SSMT SMP SMA SMB 7-16 BNC OSP Bulkhead OSP N Series N Series Page 254 BNC Page 254 Page 256 TNC Page 254 Page 254 SMA SMA Bulkhead Page 254 Page 255 Page 254 Page 254 SMA 18 GHz Page 254 and 255 and 256 and 255 Page 255 Page 255 Page 255 Series 1.0/2.3 Page 256 Series 1.6/5.6 Series 1.0/2.3 SSMT SMP SMB

75 OHM SMB

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Between Series Adapters (Continued) 7 mm Page 256 Page 256 Page 256 Page 256 7 mm best VSWR Page 256 Page 256 MCX Page 256 N Series N Series Flange Mount Page 256 Page 257 Page 257 Page 257 Page 257 OSP OSP Bulkhead Page 257 Page 257 BNC Page 257 Page 257 Page 257 Page 259 TNC TNC Flange Mount Page 258 Page 258 Page 258 Page 258 SMB

75 OHM SMB Page 259 Page 258

Page 259 Page 258 and 259 Page 260 Page 258 Page 259 Page 259 Page 259 Page 259 Page 259 SMP Page 260 SSMT Page 260 DIN-Series 1.0/2.3 Page 260 DIN-Series 1.6/5.6 Page 259 Page 260 QMA Page 260 UMCC Page 260 DIN-Series 1.6/5.6 DIN-Series 1.0/2.3 SSMT SMP SMA SMA Flange Mount SMA 18 GHz SMB TNC BNC OSP OSP Bulkhead N Series N Series Flange Mount MCX 7 mm best VSWR 7 mm UMCC Jack-Plug

Between Series Adapters (Continued) Plug-Plug MCX Plug – SMA Plug Part No. 1061071-1 19.3 [.760] Ref. 6.4 [.250] Hex. 7.9 [.312] Hex. Series 1.6/5.6 Plug – Series 1.0/2.3 Plug Part No. 2-1393670-1/H12135 Coupling Type A Ø 10.8 [0.43] 28.0 [1.10] 9.2 [0.36] 8.9 [0.35] Ø 6.5 [0.26] 1) 1) BNC Plug – SMB Plug Part No. 1058066-1 Ø 14.3 [.562] Ref. 34.1 [1.343] Ref. 7-16 Plug – N Series Plug Part No. 1313453-1 48.6 [1.912] Ref. Ø 32.0 [1.260] Ref. SMA Plug – SMP Plug Part No. 1056706-1 17.5 [.690] Ref. SMA Plug – SMB Plug Part No. 1060494-1 21.9 [.862] Ref. 6.4 [.250] Hex.7.9 [.312] Hex. SMA Plug – SSMT Plug Part No. 1055695-1 13.7 [.538] Ref. SMA Plug – OSP Plug Part No. 1059711-1 17.0 [.670] Ref. 7.9 [.312] Hex. SMA 18 GHz Plug – N Series Plug Part No. 1057367-1 Ø 21.0 [.828] Ref.Hex. 32.5 [1.281] Ref. 7.9 [.312] QMA Plug – SMA Plug Part No. 1408393-1 30.60 [1.20] 8.70 [0.34] Ref. SMA Plug QMA Plug Hex.7.90 [0.31] Hex. BNC Plug – Series 1.6/5.6 Plug Part No. 1-1393665-4/H12135 Ø 14.5 [0.57] 46.4 [1.83] Ø 10.8 [0.43] 1) Detent for jack Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 253 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Between Series Adapters (Continued) Jack-Jack 7-16 Jack – N Series Jack Part No. 1311206-1 51.0 [2.010] Ø 14.3 [.562] Ref. 32.1 [1.265] Ref. BNC Jack – 75 ohm SMB Jack Part No. 1311209-1 30.4 [1.197] 12.9 [.508] 3.82 [.150] 12.0 [.472] Hex.17.4 [.687] Across Flat Ø 12.9 [.508]Hex.15.8 [.625] BNC Jack – SMB Jack Part No. 1058056-1 TNC Jack – N Series Flange Mount Jack Part No. 1057843-1 Ø 3.2 [.125] 49.1 [1.932] 2.0 [.080] 16.7 [.656] 25.4 [1.00] 18.2 [.718] Sq. Ref. Typ.4 Plcs. MCX Jack – SMA Jack Part No. 1061070-1 15.6 [.615] 6.4 [.250] Hex. Ø 22.0 [.866] Max. Panel 31.3 [1.232] Min.Ø 15.9 [.625] 6.3 [.250] 22.0 [.867] 13.6 [.534] Min. 3.2 [.125] Recommended Mounting Hole TNC Jack – BNC Jack Part No. 1057845-1 Ø 14.5 [.572] Ref. Ref.43.1 [1.698] SMA Jack – N Series Jack Part No. 1057341-1 Ø 17.45 [.687] Ref. 31.3 [1.231] SMA Jack – N Series Bulkhead Jack Part No. 1057463-1 SMA Jack – N Series Flange Mount Part No. 1057343-1 Ø 3.2 [.125] 4 Plcs. Sq. 4.7 [.187] Max. Panel 31.3 [1.231] 18.2 [.718] 25.4 [1.00] SMA Jack – BNC Jack Part No. 1058058-1 Ø 14.3 [.562] Ref. 33.5 [1.320] BNC Bulkhead Jack – SMA Jack Part No. 1058117-1 Ø 12.7 [.500] 33.5 [1.320] Ref. Min. 17.9 [.703] Hex. Max. Panel 15.9 [.625] Hex.17.4 [.687] 5.6 [.220] Min. 3.2 [.125] Recommended Mounting Hole TNC Flange Mount Jack – SMA Jack Part No. 1057841-1 Ø 11.1 [.437] 25.4 [1.000] 2.4 [.093] 8.0 [.315] 17.4 [.687] 12.7 [.500] 4.8 [.188] Max. Panel Sq. Typ. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

SMA Jack – OSP Floating Rear Mount Jack Part No. 1059724-1 + .076 – .000 + .003 – .000 Ø 8.6 [.340 ] + .000 – .127 + .000 – .005 1.3 [.050 + .050 – .000 + .002 – .000 Ø 8.0 [.316 ] 11.2 ± .076 [.440 ± .003] 22.2 [.874] Ø 7.6 [.300] Recommended Mounting Hole Between Series Adapters (Continued) Jack-Jack (Continued) Ø 16.7 [.656] Ø 11.2 [.439] Max. Panel 33.0 [1.300] Min. Min. 5.0 [.196] Hex.14.3 [.562] 6.4 [.250] 3.2 [.125] Recommended Mounting Hole SMB Jack – SMA Jack Part No. 1060487-1 17.8 [.700] 6.4 [.250] Hex. SMA Jack – TNC Bulkhead Jack Part No. 1057908-1 SMA Jack – SMP Jack Part No. 1056702-1 12.6 [.498] 4.70 [.187] SMA Jack – SSMT Jack Part No. 1055694-1 12.9 [.508] Ref. OSP Jack – SMA Bulkhead Jack Part No. 1059733-1 Recommended Mounting Hole + 0.03 – 0.00 + .001 – .000 Ø 6.15 [.242 ] Max. Panel 17.3 [.680] 3.2 [.125] Hex.7.9 [.312] Hex.7.9 [.312] 5.8 [.230] SMA 18 GHz Jack – N Series Jack Part No. 1058651-1 Ø 17.4 [.687] Ref. 31.2 [1.229] Ref. SMA 18 GHz Jack – N Series Flange Mount Jack Part No. 1058653-1 Ø 3.2 [.125] Ø 16.0 [.630] Max. 4 Plcs. Sq. Max. Panel 31.2 [1.229] Ref. 16.5 [.650] 2.0 [.080] 25.4 [1.000] Typ.18.2 [.718] 4.7 [.187] SMA 18 GHz Jack – N Series Bulkhead Jack Part No. 1058675-1 Ø 22.0 [.866] Ø 15.9 [.625] Max. Panel 31.3 [1.232] Min. 13.6 [.534] Min. 6.3 [.250] 22.0 [.867] 3.2 [.125] Recommended Mounting Hole OSP Jack – SMA Jack Part No. 1059707-1 Ø 7.6 [.300] 14.1 [.554] SMA Jack – OSP Bulkhead Jack Part No. 1059729-1 Recommended Mounting Hole + .003 – .000 + .001 – .000 Ø 9.12 [.359 ] Max. Panel Ref.14.1 [.554] Hex.11.1 [.437] Hex.11.1 [.437] 6.4 [.250] 3.2 [.125] OSP Floating Flange Mount Jack – SMA Jack Part No. 1059731-1 Recommended Mounting Hole + 0.03 – 0.05 + .002 – .001 Ø 9.6 [.377 ] Max. Panel 22.2 [.874] 9.7 [.380] 14.2 [.560] 1.7 [.065] 14.2 [.560] Ø 9.4 [.372] Ø 19.1 [.750] Ø 2.6 [.102] 2 Plcs. 3.2 [.125] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 255 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Between Series Adapters (Continued) Jack-Jack (Continued) BNC Jack – Series 1.6/5.6 Jack Part No. 1-1393665-5/H12135 Ø 9.6 [0.38] 45.4 [1.79] Ø 8.2 [0.32] Ø 11.0 [0.43] Ø 14.5 [0.57] M9.0x0.5 [0.35]x[0.02] Series 1.0/2.3 Jack – Series 1.6/5.6 Jack Part No. 2-1393670-4/H12135 Coupling Type A, B, F Ø 4.1 [0.16] 39.4 [1.55] Ø 10.8 [0.43] Ø 8.2 [0.32] Jack-Plug N Series Plug to 7 mm Jack Part No. 1061742-1 43.3 [1.705] Ref. 19.1 [.750] Hex. Ø 22.4 [.880] Ref. 30.7 [1.208] Ref. Ø 22.1 [.870] 11.1 [.437] Hex. 19.1 [.750] Hex. TNC Plug to 7 mm Jack Part No. 1061739-1 40.9 [1.610]Ref. 19.1 [.750] Hex. Ø 22.4 [.880] Ref. 15.9 [.625] Hex. OSP Plug to 7 mm Jack Part No. 1059713-1 TNC Plug to 7 mm Best VSWR Jack Part No. 1061744-1 40.9 [1.610]Ref. 19.1 [.750] Hex. Ø 22.4 [.880] Ref. 15.9 [.625] Hex. 16.8 [.660] Ref. 6.4 [.250] Hex. 7.9 [.312] Hex. N Series Jack – 7 mm Plug Part No. 1061757-1 36.7 [1.445] Ref. Hex.19.1 [.750] Ref.Ø 22.4 [.880] MCX Jack – SMA Plug Part No. 1061073-1 SMA Flange Mount Plug to 7 mm Jack Part No. 1061751-1 Ø 3.2 [.125] 4 Plcs. Sq. Max. Panel 35.0 [1.380] Ref. 25.4 [1.000] Hex.7.9 [.312] Typ.19.1 [.750] Hex.19.1 [.750] Ref.Ø 22.4 [.880] 2.4 [.093] 2.1 [.083] Ø 22.4 [.880] Ref.19.1 [.750] Hex. 7.9 [.312] Hex. 31.8 [1.25] Ref. N Series Plug to 7 mm Best VSWR Jack Part No. 1061738-1 43.3 [1.705] Ref. 19.1 [.750] Hex. Ø 22.4 [.880] Ref. SMA Plug to 7 mm Jack Part No. 1053646-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Between Series Adapters (Continued) Jack-Plug (Continued) N Series Jack – 7 mm Best VSWR Plug Part No. 1061752-1 36.7 [1.445] Ref. Hex.19.1 [.750] Ref.Ø 22.4 [.880] Ø 16.8 [.660] Ref. Ref.52.7 [2.076] N Series Jack – TNC Plug Part No. 1057388-1 Ø 15.9 [.625] Ref. Ref. Ref.Ø 16.8 [.660] 51.9 [2.043] BNC Plug – N Series Jack Part No. 1057392-1 Ø 17.45 [.687] Ref.Hex. 32.8 [1.292] Max. 7.9 [.312] SMA 18 GHz Plug – N Series Jack Part No. 1058664-1 Ø 17.4 [.687] Ref. 7.9 [.312]Hex. 32.3 [1.270] Ref. SMA Plug – N Series Jack Part No. 1057381-1 SMA Plug – N Series Flange Mount Jack Part No. 1057385-1 Ø 3.2 [.125] 4 Plcs. Sq. Max. Panel 32.3 [1.270] Ref. 25.4 [1.000] Hex.7.9 [.312]Typ.18.2 [.718] 4.7 [.187] OSP Jack – 7 mm Plug Part No. 1059720-1 Ø 22.4 [.880] Ref. 19.1 [.750] Hex. 11.1 [.437] Hex. 29.6 [1.166] Ref. SMA Plug – OSP Jack Part No. 1059718-1 17.4 [.685] Ref. 7.9 [.312] Hex. Ø 7.6 [.300] Recommended Mounting Hole + 0.03 – 0.00 + .001 – .000 Ø 9.12 [.359 ]Max. Panel 17.4 [.686] Ref. 3.2 [.125] Hex.7.9 [.312] Hex.11.1 [.437] 6.4 [.250] BNC Jack – N Series Plug Part No. 1057390-1 Ø 21.0 [.827] Ref. Ref.49.1 [1.934] SMA Plug – OSP Bulkhead Jack Part No. 1059758-1 Ø 14.3 [.562] Ref. 35.8 [1.408] Ref. SMA Plug – BNC Jack Part No. 1058083-1 Ø 14.3 [.562] Ref. Ref.34.6 [1.362] Hex.7.9 [.312] BNC Jack – SMB Plug Part No. 1058077-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 257 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Between Series Adapters (Continued) Jack-Plug (Continued) TNC Jack – 7 mm Plug Part No. 1061753-1 41.3 [1.625] Ref. Hex.19.1 [.750] Ref.Ø 22.4 [.880] 41.3 [1.625] Ref. Hex.19.1 [.750] Ref.Ø 22.4 [.880] TNC Jack – N Series Plug Part No. 1057387-1 Ø 21.0 [.827] Ref. Ref.49.1 [1.934] TNC Jack – 7 mm Best VSWR Plug Part No. 1061758-1 TNC Flange Mount Jack – SMA Plug Part No. 1057857-1 26.4 [1.038] 2.0 [.080] 13.4 [.529] 7.9 [.312] Ø 11.8 [.465] Hex. 17.4 [.687] Sq. 12.7 [.500] Typ. Ref. Ref. Max. SMA Plug – SMB Jack Part No. 1060500-1 20.7 [.815] Ref. 6.4 [.250] Hex.7.9 [.312] Hex. 18.2 [.716] 6.4 [.250] Hex. SMA 18 GHz Jack – N Series Plug Part No. 1057377-1 Ø 21.0 [.828] Ref. 31.5 [1.250] Ref. SMA Jack – MCX Plug Part No. 1061072-1 Ø 14.3 [.562] Ref. 31.8 [1.250] Ref. TNC Plug – SMA Jack Part No. 1057853-1 Ø 15.9 [.625] Ref. Ref.25.4 [1.000] SMA Jack – BNC Plug Part No. 1058081-1 SMA Jack – SMB Plug Part No. 1060498-1 19.3 [.760] Ref. 6.4 [.250] Hex. 14.2 [.560] SMA Jack – SSMT Plug Part No. 1055696-1 10.5 [.413] Ref. SMA Jack – SMP Plug Part No. 1056707-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Ø 3.2 [.125] Ø 12.7 [.500] Min. Panel Hole 4 Plcs. Sq.Max. Panel 31.8 [1.250] 11.7 [.461] 2.0 [.080] 25.4 [1.000] Typ.18.2 [.718] 6.4 [.250] OSP Plug – SMA Jack Part No. 1059716-1 6.4 [.250] Ø 7.6 [.300] 13.7 [.538] N Series Flange Mount Plug – SMA 18 GHz Jack Part No. 1058666-1 SMA 18 GHz Jack – OSP Bulkhead Plug Part No. 1059756-1 Recommended Mounting Hole + 0.03 – 0.00 + .001 – .000 Ø 6.15 [.242 ] 19.3 [.760] 1.7 [.065] 11.4 [.447] 3.2 [.125] Max Panel Hex.11.1 [.437] Hex.7.9 [.312] 16.0 [.632] Ref. 7.90 [.312] Hex. SMA Plug OSMP Jack SSMT Jack – SMA Plug Part No. 1055697-1 16.2 [.639] Ref. SMA Plug SSMT Jack SMP Jack – SMA Plug Part No. 1056708-1 Series 1.6/5.6 Plug – Series 1.0/2.3 Jack Part No. 2-1393670-2/H12135 Coupling Type A, B2, F2 Ø 10.8 [0.43] 33.0 [1.30] 9.2 [0.36] Ø 4.1 [0.16] BNC Plug – Series 1.6/5.6 Jack Part No. 1-1393665-6/H12135 Ø 14.5 [0.57] 44.3 [1.74] Ø 8.2 [0.32] BNC Jack – Series 1.6/5.6 Plug Part No. 1-1393665-7/H12135 Ø 9.6 [0.38] 45.4 [1.79] Ø 10.8 [0.43] Ø 11.0 [0.43] Ø 14.5 [0.57] Between Series Adapters (Continued) Jack-Plug (Continued) SMA Flange Mount Jack – 7 mm Plug Part No. 1061750-1 30.5 [1.200] 19.1 [.750] Hex. Ø 22.4 [.880] Ref. Ø 3.2 [.125] Dia. 4 Plcs. 2.0 [.080] 23.5 [.925] Ref. 19.1 [.750] Typ. 25.4 [1.000] Sq. SMA Jack – UMCC Plug Part No. 1775229-1 14.0 [.551] 5.6 [.220] 10.0 [.393] Ø 5.3 [.208] Ø 2.6 [.102] Ø 6.25 [.246] 1/4-36UNS SMA Jack – UMCC Plug Part No. 1775230-1 14.0 [.551] 5.6 [.220] 10.0 [.393] Ø 5.3 [.208] Ø 2.5 [.098] Ø 6.25 [.246] 1/4-36UNS Ø 22.4 [.880] Ref.19.1 [.750] Hex. 30.9 [1.216] Ref. SMA 18 GHz Jack – 7 mm Plug Part No. 1053788-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 259 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Between Series Adapters (Continued) Jack-Plug (Continued) Series Plug 1.0/2.3 – Series 1.6/5.6 Jack Part No. 2-1393670-3/H12135 Coupling Type A, B2, F2 1) Detent for jack

2 Only jackside

Ø 6.5 [0.26] 34.5 [1.36] 8.9 [0.35] Ø 8.2 [0.32] Ø 10.8 [0.43] QMA Jack – SMA Plug Part No. 1408343-1 21.50 [0.85] 7.90 [0.31] Ref. QMA Jack SMA Plug Hex.6.35 [0.25] Hex. UMCC Jack – SMA Plug Part No. 1775228-1 10.60 [.417] 8.0 [.315] Hex. 1.10 [.043] Ø 2.00 [.078] UMCC Jack – SMA Plug Part No. 1775227-1 10.60 [.417] 8.0 [.315] Hex. 1.10 [.043] Ø 1.90 [.074] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Plating — Gold Frequency — 6 GHz 3.40 [.134] Max. 11.00 [.433] Max. 2.50 [.098] Max. Coupling Nut Shell Center Conductor Dielectric SW 8 h11 SMC Plug Terminator Part Number 1460803 Plating — Gold Frequency — 6 GHz 13.00 [.512] Max. SW 6 h11 + 0.10 – 0.30 + .004 – .012 3.30 [.130 ] Coupling Nut Shell Center Conductor Dielectric Push Pull Plug Terminator Part Number 619219 Plating — Gold Frequency — 6 GHz 17.70 [.697] Ref. Ø 8.30 [.327] Ø 7.70 [.303] 8.00 [.315] 5.50 [.217] QMA Plug Terminator Part Number 619271-1 Single Packaging Plating — Standard Gold Part Number 5-619271-1

1000 Pieces per Pack

Plating — Standard Gold Part Number 619271-2 Single Packaging Plating — Higher Gold Part Number 5-619271-2 Plating — Higher Gold 19.80 [.780] Ø 10.50 [.413] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. 261 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Application Tooling Fixture Sub-Assembly Center Contact Holder Locator Tool Solder Gage Inserts Description Model Part No. NSN No. Center Contact Holder T -4580 –– 1055474-1 Fixture Sub-Assembly T -4567 –– 1055439-1 Inserts – 2.16 [.085] (2) T -4700-2 5120-00-132-6808 1055441-1 Inserts – 3.66 [.141] (2) T -4700-1 5120-00-132-6807 1055440-1 Locator Tool T -4596 –– 1055476-1 Locator Tool T -4574 –– 1055477-1 Solder Gage .813 [.032] T -4562-6 –– 1055475-1 All Tools May Be Purchased Separately. For installation of TNC Series connectors to 3.66 [.141] and 2.16 [.085] diameter semi- rigid cable. Most BNC Series connectors can also be assembled using this kit. See appropriate assembly procedure for specific tooling. This kit contains: Installation Kit Part No. 1055469-1 For TNC Connectors

Tyco Electronics Universal Compression Crimp Tool offers the ability to rapidly produce cable assemblies using solderless compres- sion crimp connectors with semi-rigid cables. This uni- versal assembly tool kit will attach SMA, OSP, N and TNC series connectors to 6.35 [.250] cable quickly and consistently with excellent mechanical and electrical results. The tool kit permits single hand assembly. Anvils and cable supports can be quickly changed. Crimp lengths can be adjusted from .025 [.001] to 25.4 [1.000] in increments of .025 [.001]. Sharp radius bends in cables are easily accommodated. The kit contains: Item Description Part No. Center Contact Holder 1055454-1 Dielectric Insert Tool 1055448-1 1055447-1 Dielectric Recess Tool 1055450-1 Fixture Sub-Assembly 1055439-1 Inserts — 2.16 [.085] (2) 1055441-1 Inserts — 3.58 [.141] (2) 1055440-1 1055442-1 Locator Tool 1055443-1 1055446-1 1055451-1 Retainer Ring Pliers 1055449-1 Solder Gauge 0.25 [.010] 1055500-1 Solder Gauge 0.38 [.015] 1055445-1 Solder Gauge 0.46 [.018] 1055444-1 Description Part No. Crimp Frame 1055831-1 Calibration Gauge 1055832-1 3.58 [.141] Cable Support 1055833-1 2.16 [.085] Cable Support 1055834-1 SMA Plug Anvil 1055836-1 SMA Jack Anvil 1055837-1 Type N Plug Anvil 1055838-1 Type N Jack Anvil 1055839-1 TNC Plug Anvil 1055840-1 TNC Jack Anvil 1055841-1 OSP Plug Anvil 1055842-1 OSP Jack Anvil 1055843-1 All tools may be purchased separately. Crimp Frame Gauge Anvil Cable Supports Inserts Locator Tools Retainer Ring Pliers Fixture Sub-Assembly Solder Gage Dielectric Recess Tool Center Contact Holder Dielectric Insert Tool Solder Assembly Kit Brass SMA Connectors Kit Part Number 1055420-1 263 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Application Tooling (Continued) RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Application Tooling (Continued) RF Coax Connectors Crimping Tools IDC Tool For assembling IDC coaxial connectors Series 1.6/5.6 mS on coaxial cables. L 50.0 [1.97] 6.6 [0.26] Hexagon Profile No. with Open Jaws Part No. 1-1393524-1 225.0 [8.86] Item Width Across Flats of the Profile Dim. Color of Part No.12 3 L handles Crimping tools are used for assembling coaxial connec- tors on coaxial cables. They can be applied particularly economically for small batch sizes. The crimping dies are a fixed part of the crimping tools. Each tool is equipped with 2 or 3 different profiles. A total of 6 widths across flats are possible with 2 tools, whose hand lengths are adapted to the dimen- sions of the hexagon pro- files. The tools can be distinguished at a glance by different colored handles. Item Part No. Removal tool length 70 [2.76] 2-1393524-4 length 200 [7.87] 2-1393524-6 Spare part Ferrule 2-1393524-7 Removal Tool For replacing the special contacts on connectors DIN 41612 M and SIEDECON. 12.5 [0.49] 70.0 [2.76] Ferrule (spare part) 1.4 [0.04] 200.0 [7.87] 12.5 [0.49]

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Application Tooling (Continued) Item Part No. Setting gauge for types M 1393494-9 M/2 1-1393494-0 M/3 1-1393494-1 Note: These gauges can also be used to pro- tect types C, C/2, C/3 and D. Setting Gauge Protective Caps/Setting Gauges The setting gauges are used to position coaxial jacks and pre-mating high-current plugs on male connectors DIN 41612 M if the pins are flow-soldered into PC boards. The gauges are held by clamping in connector body and protect the blade contacts. The gauges provide protection — during transport (if the male connectors have already been removed from the packaging), — during assembly, — against soiling, — during soldering. ECN1225-PPC Board Setting Gauge Male Connector DIN 41612M Used to tighten the threaded rings 1-1393562-0 on bulkhead jacks Series 1.6/5.6. Item Part No. Wrench 1393524-1 Used to tighten the threaded ring on bulkhead jack 1393670-8. Item Part No. Wrench 1393488-4 Used to tighten the threaded ring on bulkhead jacks Series 1.0/2.3 Item Part No. Wrench 1393488-3 Wrench Ø 5.6 [0.22] 1.0 [0.04]Ø 6.7 [0.26] 50.0 [1.97] 1.0 [0.04] Ø 6.1 [0.24] 1.2 [0.05]Ø 7.3 [0.29] 50.0 [1.97] 1.5 [0.06] ECN1230-Q Ø 11.0 [0.43] Ø 0.91 [0.36] 0.9 [0.04] 1.35 [0.05] 40.0 [1.57] Movable 50.0 [1.97] 50.0 [1.97] RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Application Tooling (Continued) RF Coax Connectors Hand Tools Tyco Electronics PRO-CRIMPER II Hand Tools are econ- omy versions of our Tyco Electronics CERTI-CRIMP Hand Tools, featuring ratcheted crimp control to provide full die closure and help eliminate partial crimps. With an all new design, the PRO-CRIMPER II hand tools require dra- matically less hand force to produce the same connection as comparable tools. Dies are interchangeable. It’s the most versatile and reliable crimping tool in the mid-price class. Recommended for networking installations, and commercial, industrial and institutional maintenance work. See Catalog 82276 for further information. Typical PRO-CRIMPER III Hand Tool No. 58433-1 for 50 Ohm BNC Dual “O” Crimp Commercial Connectors Tyco Electronics CERTI-CRIMP Hand Tools are our top-of- the-line crimping tools featuring the original ratcheted crimp control. All tools are designed to exacting specifications, and manufactured using the highest quality materials to provide long service life. Recommended for low production runs, repairs and prototype work, and applications requiring con- sistent, highly-reliable terminations. See Catalog 65780 for further information. Typical CERTI-CRIMP Hand Tools with Integral (Non-Interchangeable) Dies No. 69477-1 for 50 Ohm BNC Dual Crimp MIL Type Connectors No. 220015-1 for 50 Ohm N ConnectorsCERTI-CRIMP Hand Tool with Interchangeable Dies No. 69710 Pneumatic Tools The 626 Pneumatic Tool System, as the name implies, will apply a broad range of products in the 6-26 AWG [13-0.12 mm 2] wire range. A basic 626 Pneumatic Tool System requires a power unit, a tool holder, a crimp head assembly and a die set when applicable. This premium system is well suited for low- to medium- volume production and harness assembly operations. Since the crimp head can be rotated to any angle, the operator can also work on more difficult terminations in confined equipment cabinets or enclosures. Interchangeable tool holder assemblies and crimping heads are available to crimp a variety of products. Crimping heads for the earlier Model 2614 pneumatic power unit can be used with the 626 Pneumatic Tool System. If you are already using Tyco Electronics hand tools, many crimp heads and die sets can be removed, attached to an adapter with quick pins and used with the

626 Pneumatic Tool

System. An adapter is even available to accept lower cost die sets of the PRO-CRIMPER II hand tool. For more information, order catalog 124208. Bench Mount Assembly for Pneumatic Tool System (Optional) Fully adjustable stand allows operator free use of both hands — recommended for maximum productivity. No. 856402-1 Part Number 1725837-1 Part Number 1213890-1 (Open Barrel) Battery Powered Crimp Tool Take automatic crimping away from the bench to the product, with this convenient, portable, battery-operated tool. It’s at home in the factory or in the field.

• Completely portable— performs about 100 crimps per charge
• Terminates wires to 10 AWG [6 mm
• Weighs only 1.57 kg [3.46 lb] including battery; 360 mm [14.2 in] long
• Pressure-sensitive cycle control
• Kit includes tool, 2 batter- ies, and charger No. 189721-1

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Application Tooling (Continued) Bench-Mounted Machines AMP-O-LECTRIC bench-mounted, semi-automatic terminating machines may be used to apply RF products such as Commercial BNC and TNC Connectors, Miniature and Standard UHF Connectors, and Braid-Pic Contacts and Terminals. The Model G unit features interchangeable applicators, and is used to apply strip-form contacts. The “Coax” unit is used to apply loose-piece contacts and ferrules with dies that are mounted onto the machine. See Catalog 65828 and Customer Manual 409-2627 for further information. AMP-O-LECTRIC Model G, No. 354500 Series with Tyco Electronics Crimp Quality Monitor Semi-Rigid Cable Tooling The tools listed here are designed specifically to strip and terminate semi-rigid cable. These tools operate basically the same as the flexible cable tools, in that they produce uni- form terminations time after time, without heat damage from soldering. Hand Tool for BNC and TNC Semi-Rigid Cable Connectors No. 59980-1 Frame only— does not include dies and locator Stripping Tools The hand-operated Tyco Electronics Coaxial Cable Stripper features interchangeable, color-coded blade cas- settes and V-blocks to accommodate 2- or 3-step stripping for cable diameters ranging from 2.54 [.10] through 7.62 [.30]. You strip cable by simply clamping and rotating the tool around the cable. See Instruction Sheet IS 2766 for further information. For Use With Tool No.Connector Type BNC Single Crimp 603995-1 BNC Commercial and 603995-2UHF Miniature UHF Standard 603995-3 BNC MIL Type Dual Crimp 603995-5 BNC Commercial Dual Crimp 603995-6 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Application Tooling (Continued) RF Coax Connectors Hand Tool Kit for SMA and Blindmate Connectors No. 59981-1 Pneumatic Tool for Terminating BNC, TNC, SMA and Blindmate Connectors (for RG 402/U and RG 405/U Cable) No. 58318-1* This pneumatic tool is a bench-mounted, semi-automatic power tool designed for easy operation. The operator needs only to depress the trigger to complete a termination. It is used with the cable preparation machine to produce finished terminations. *Includes Locators 220241-1 and 308075-2. Dies are not included. Part Numbers Item Description Tyco Electronics Military (M22520/) Hand Tool 59980-1 36-01 Plug Locator 220220-2 36-06(without Center Contact) Plug Locator 220221-2 36-04(with Center Contact) Jack Locator 220222-2 36-05 Die Set for RG 402/U Cable 312253-1 36-03(3.58 [.141] O.D.) Die Set for RG 405/U Cable 312253-2 36-02(2.18 [.086] O.D.) Cutoff Fixture 311395-1 36-09 Cable Dressing Fixture 311396-1 36-07 Trimmer Tool 312317-1 36-08 Cable Bend Fixture Assembly 220224-1 36-10Includes following 6 items: Bend Segment, RG 402/U 311386-1 36-11(3.18 [.125] Radius) Bend Segment, RG 402/U 311386-2 36-12(6.35 [.250] Radius) Bend Segment, RG 405/U 311386-3 36-13 Tool Holder 311392-1 — Limiting Pin 307581-1 — Conforming Block 312067-1 — Hex Wrench 21027-6 — Carrying Case 13126-1 — Insert, Case 13127-1 —

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Cable Assembly Capabilities When your RF application demands a high perform- ance cable assembly, make Tyco Electronics your advantage. We specialize in solving tough problems with assemblies designed and manufactured to the most demanding requirements. Why Tyco Electronics? Quite simply, because we can give you a comprehensive engineered solution to your application needs. By pro- viding a precise match between cable, connector and application, we supply cable assemblies that meet your exact needs. Every cable assembly application is unique. A Tyco Electronics custom solution can be designed to meet your special require- ments — whether these are related to return and insertion loss, propagation delay and phase matching, shielding and EMI, or spe- cial mechanical issues like density, latching, appear- ance, flexibility, or even weight. We approach your cable assembly individually, using the vast resources and knowledge gained from years of experience gener- ating custom solutions. By making Tyco Electronics your partner in cable assembly design, you reduce risk and gain the assurance that you will receive assembly on time, to specification and within your budget. Tyco Electronics offers a wide range of RF/Coax Cable assemblies including 50 and 75 Ohm solutions, from micro-miniature UMCC and SSMT to high power assemblies using N-Series and DIN 7/16 connectors. Furthermore, we use a variety of cable types to meet unique requirements from standard military quali- fied RG cable to low loss foamed PE and PTFE tape wrapped cable as well as semi-rigid. Our engineering experts will find the right combination of materials to provide a solution that is cost effective.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Cable Assembly Capabilities (Continued) Utilizing network analyzers, TDR, and intermodulation test equipment to mention a few, our testing capability allows extensive electrical and environmental charac- terization of your assembly. We offer full test capabilities right in our manufacturing facilities. Tests such as those listed below can be an integral part of the man- ufacturing process: ■ VSWR, ■ Return Loss, ■ Insertion Loss, ■ Phase matching, ■ Propagation Delay, ■ Impedance, ■ Passive Intermodulation. Our cable manufacturing centers are designed to meet your production requirements and delivery needs. Our global loca- tions, combined with Tyco Electronics logistic strengths assures you will get the product where and when you need it. Harrisburg, PA Product Management Product Development Prototyping, Samples Diecasting Stamping Plating Cable Assembly Ooskampt, Belgium Product Management Product Development Screw Machining Plating Assembly Norwood, MA Product Development Screw Machining Plating Connector and Cable Assembly, Quick Turn Taipei, Taiwan Product Management Product Development Hermosillo, Mexico Connector Assembly Cable Assembly Kunshan, China Product Development Screw Machining Connector and Cable Assembly Shanghai, China Connector Assembly Shenzhen and Hangzhou, China Connector Assembly Tesla, Czech Republic Connector Assembly Brazil Cable Assembly Switzerland Development Eng. Screw Machining Assembly

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Coaxial Cable Assembly Specification Guide Please use this handy reference guide when specifying or building your new cable assembly. Length Label (Optional) Heat Shrink (Optional) A B CONNECTOR A INTERFACE example: BNC, MCX, SMA, etc. STYLE example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc. HEAT SHRINK ❏ MARKING CONNECTOR B INTERFACE example: BNC, MCX, SMA, etc. STYLE example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc. HEAT SHRINK ❏ MARKING CABLE LENGTH (inch/mm) RG TYPE OR CABLE MFG. MFG. PART NO. OR FREQUENCY RANGE (MHz/GHz) IMPEDANCE Ohms INSERTION LOSS dB SHIELDING EFFECTIVENESS dB TEMP . RANGE (°C/°F) MAX. AVG. POWER HANDLING* Watt * 25°C at sea level and max. specified frequency ELECTRICAL SPECIFICATIONS VSWR OR RETURN LOSS INSERTION LOSS DELAY INSERTION PHASE INTERMODULATION LABEL ❏ MARKING OTHER SPECIFICATIONS

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix A - Theory and Application Theory and Application As a leading manufacturer of RF products, Tyco Electronics produces a large variety of coaxial connectors. The proper selection and application of these connectors requires a knowl- edge of factors not involved in other types of connectors and terminals. The following paragraphs have been prepared to improve understanding of the theory behind RF connectors: Basic RF Theory1 RF energy travels by electromagnetic waves, and it is pri- marily the frequency of these waves that we are interested in. Briefly, if an oscillating voltage source is connected to a cable, a continuous electromagnetic wave will propagate along the cable. A sensor placed at some point on the cable would indicate a varying voltage (E field) as well as a current and magnetic field (H field) as the wave travels past it. This is called an electromagnetic wave because both electric and magnetic fields are varying. The wave shape is initially determined by the variation of the source with time. Figure 7 shows the radiant energy spectrum. Visible light, radio, television, x-rays and Gamma rays are all phenome- non of electromagnetic waves at different frequencies. This introduction will treat only those that are generated by an electrical source and propagated along a physical cable or other transmission media. That is, frequencies above zero and up to about 50 gigahertz. 1The majority of the technical terms, relative to RF and coaxial cable and connectors, used here-in and throughout this catalog are defined in the Glossary (Appendix G) starting on page 301.0 - 29.9 VLF Commercial AC electricity, deep KHz (Very Low depth sounders, ultrasonic Frequency) grinders, sonic oscillators 30 - 299.9 LF Shallow-to-medium depth sounders KHz (Low sonar Frequency) 300 - 2999.9 MF Commercial AM radio broadcasting, KHz (Medium marine radio telephone, direction Frequency) finders 3 - 29.9 HF Citizen band radio, amateur radio, MHz (High international broadcasting Frequency) 30 - 299.9 VHF VHF television (Channels 2 thru MHz (Very High 13), commercial FM radio Frequency) broadcasting, amateur radio, fire and police radio 300 - 2999.9 UHF UHF television (Channels 14 thru MHz (Ultra-high 83), microwave ovens, aeronautical Frequency) radionavigation 3 - 29.9 SHF Microwave communications, marine GHz (Super High radar, aircraft tracking and Frequency) airborne radars 30 - 299.9 EHF Space communications, radio GHz (Extremely High astronomy Frequency) Notes: 1. KHz = Kilohertz (1 thousand cycles per second) 2. MHz = Megahertz (1 million cycles per second) 3. GHz = Gigahertz (1 billion cycles per second) Frequency or Wavelengths Designation Applications Figure 7 Radiant Energy Spectrum In the following paragraphs we will discuss waves in greater detail, including the relationship of frequency and wave length, how pulses are formed and used, how each differs from the other and the problems involved in their transmission. Sine Waves An RF wave is a sine wave, meaning that it smoothly swings from zero to a positive peak value, then back down past zero to a negative peak value, then back to zero to com- plete a 360 electrical degree cycle. The positive and nega- tive peaks are always equal in amplitude. The two qualities which characterize this type of wave are amplitude and fre- quency (f). Figure 8 shows these two characteristics. Amplitude refers to the peak value attained by the wave and corresponds to voltage. Frequency refers to the number of oscillations per second. For example, the sign wave in Figure 8(B) has completed 12 cycles in one second. Therefore, we would say that this wave has a frequency of 12 cycles per second or 12 Hertz. The time for one com- plete cycle is defined as the period (T). The relationship between the period and frequency is given by the equation: f = 1 / T in Hertz A Peak Positive Amplitude Peak Negative Amplitude One Cycle 1 2 3 4 56 7 8 9 10 11 12 B Figure 8 Typical Sine Wave Characteristics No. of Cycles

1 Second

1 2 3 4 5 6 7 8 9 10 11 12 The wave travels away from the generator at speeds approach- ing the speed of light. When an electromagnetic wave travels in a medium other than air or vacuum, the speed for the wave is reduced by a factor of the square root of the dielectric constant ( ε. The velocity (v) of the propagation of a signal is given by: c v= __ε Where c is the speed of light, 3 x 10 8 m/sec or 1.18 x 1010 in/sec, and ε is the dielectric constant of the medium. (See Table 1 for dielectric constants of various materials) The wavelength of a signal is given by the formula c 1.18 x 10 ε x f (GHz) ε x f (GHz) See Figure 9

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix A - Theory and Application (Continued) Figure 17 Multiple Wave Reflections (Caused by Impedance Mismatch) λ/4 λ/4 25 Ω 50 Ω50 Ω .66V .33V .15V .44V .07V .22V V outV in

1 V out

V in = 1 Volt V R =.48 Volt V out =.52 Volt In summary, avoid cable lengths, printed circuit board paths, or connectors that are multiple of one quarter ( λ/4, 3λ/4, etc.) of the intended signal transmission wavelength. Coaxial cables, when manufactured, also have periodic variations in diameter that result in periodic changes in impedance (Zo), that can cause significant levels of reflected signal (high return loss) at specific frequencies. Reflections of Digital Signals The previous discussions dealing with attenuation, reflections and standing waves can apply to digital signals with some extra thought. A single pulse can be thought of as a combination of high frequency sine waves. The maximum frequency component in a square wave pulse can be calculated by this equation: f = 0.35/rise time where f = GHz when “t” is in nanoseconds Attenuation of the frequencies necessary to support the short risetime will produce a slower rise and possibly prohibit the pulse from ever reaching the detector. This ‘slurring’ of the pulse is similar to the behavior of an RC circuit and the attenuation is sometimes called capacitive attenuation. A series of pulses can demonstrate resonance. If a portion of a pulse is reflected at each interface, it is possi- ble for them to come together and add up to form a new phantom pulse. The critical frequency here is the bit rate. Think of a sine wave with a frequency the same as the bit rate; if it will resonate in the cable, the pulses will also. Extra pulses caused by resonance might easily result in an error signal from the receiving system requesting a retransmittal. The final result would be a communication system that is much slower than intended. Cut-off Frequency The cut-off frequency of a coaxial transmission line is the frequency at which modes of energy transmission, other than the “TEM” mode, can be generated. 7.5 ε (D+d) (D and d are measured in inches) Types of Transmission Lines Twin Lead transmission cable is generally used where impedance matching alone is important, since it provides only minimal shielding. Impedance values of 300 ohms and 600 ohms are common. Lower impedance values require closer spacing of the conductors and are not nor- mally available in this type of cable. A typical application for twin lead cable is in antenna lead wire for television sets. Twisted Pair is a variation of the twin lead type. It consists of two lengths of ordinary hookup wire twisted together. A twisted pair provides relatively constant impedance plus better magnetic shielding than twin lead cables. It is flexi- ble, inexpensive, easy to terminate and is used extensively by the computer industry. However, it should not be used when maximum shielding is required. wavelength of 4 inches traveling on a cable that changes from 50 ohms to 25 ohms. The reflection coefficient is -.33, which means that one third of the incident voltage is reflected toward the source. Assume that one inch (one quarter wave- length) down the cable the impedance changes back to 50 ohm. Again, one third of the wave is reflected, but without any phase shift. It travels back to the first interface where one third of this reflected wave is reflected back toward the sec- ond interface. Two thirds of the wave is transmitted through the interface and travels back to the source. Since the first (reflected) wave is shifted 180 degrees at the reflection, and the second (transmitted-reflected-transmitted) wave is shifted 180 degrees because it traveled the one inch separation twice, the two waves are in phase. The net result is that the VSWR is much larger because the length of the 25 ohm sec- tion was just the right length to cause a resonance. If the length of the 25 ohm section had been one half wave- length, the two waves would have interfered and the VSWR would be at a minimum. 7.5 ε (D+d) fco = (in GHz)

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix B - White Bronze High Quality Surface Plating & Excellent Intermodulation Performance for RF Connectors Product Facts ■ Low intermodulation ■ High corrosion resistance ■ Low porosity ■ Low RF losses ■ Wear and scratch resistance The Tyco Electronics White Bronze surface finish repre- sents a dramatic improve- ment upon the wear characteristics and life expectancy of silver plating, at the same time offering a far better electrical perform- ance than nickel. White Bronze plated connectors exhibit intermodulation characteristics significantly better than stainless steel or nickel plated products. Silver has always been the preferred finish from an electrical standpoint but its corrosion and wear charac- teristics especially in harsh conditions are often unac- ceptable. While nickel is an extremely rugged finish it has properties undesirable in many RF applications; including, high RF and insertion losses, poor inter- modulation performance, high permeability and poor screening effectiveness. The Tyco Electronics White Bronze is composed of copper, tin and zinc which are applied simultaneously to produce a finished color similar to stainless steel. With one of the most advanced industrial electro- plating facilities in the world Tyco Electronics can achieve the levels of control over the complex galvanic process necessary in the application of this alloy. The Tyco Electronics White Bronze is similar in compo- sition and performance to other copper/tin/zinc alloys developed in the industry such as Sucoplate ® and BBR. Comprehensive condition- ing tests have been per- formed to provide a thorough evaluation of The Tyco Electronics White Bronze plated connector bodies. The tests were per- formed to the specifications of the European and International RF connector standards — CECC 22000/IEC 68-2-14/ IEC 169-1. The results are summarized on page 280. Need more information? Call Technical Support Center at 1-800-522-6752 for product and tooling information. The Technical Support Center is staffed with specialists well versed in all Tyco Electronics products. The Center can provide you with: ■ Engineering Support ■ Catalogs ■ Technical Documents ■ Product Samples ■ Tyco Electronics Authorized Distributor Locations ■ Tyco Electronics Internet Home Page: www.tycoelectronics.com Tyco Electronics’ industrial electroplating facilities is one of the most advanced in the world. Deposit Characteristics Composition — Copper (55-60%), Tin (20-25%), Zinc (15-20%) Density — 7.9-8.1 g/cm3 Hardness — 300-380 HV Passivation — Immersion Chrome Sucoplate® is a plating trademark for Huber & Suhner. BBR is a plating trademark for Radiall.

Appendix B - White Bronze (Continued) Low Intermodulation Products Dissimilar metals, finishes and discontinuities within a coaxial line structure give rise to Intermodulation Products (IMP). This is of particular concern in appli- cations requiring low levels of intermodulation, such as cellular base stations and antennas. White Bronze plated connectors offer bet- ter IMP performance and lifetime characteristics than nickel. Due to the similarity of electrolytic potentials and the non magnetic proper- ties of the finish, levels of intermodulation are com- mensurate with silver and far in excess of stainless steel/nickel connectors. At the same time the excellent wear characteristics and durability of the finish ensure that the intermodula- tion life of the connector is greater than silver. The life is also improved as a direct result of the excellent corro- sion resistance properties of White Bronze; thereby minimizing metal/metal oxide junctions. Highly Corrosion Resistant Even under continuous exposure to harsh environ- ments White Bronze retains its aesthetic appearance. Unlike silver it does not discolor when exposed to sulphur, potassium sul- phides etc., neither is there any build up in oxide layers as is the case with nickel. Furthermore, White Bronze parts have successfully passed all international salt spray tests (MIL, BS, CECC, IEC). In conditions of continu- ously high temperatures (>100°C) and/or excessive humidity (>100%) there is no build up of foreign layers which may affect contact resistance. Low Porosity and No Reaction with Contact Surfaces Less than 2µm of White Bronze is needed to create a completely nonporous, corrosion resistant surface. Tyco Electronics applies White Bronze to a thickness of between 2µm and 3µm. This compares favorably with the typical plating thickness of nickel (>10µm) and consequently, varia- tions in plating depth are significantly less. White Bronze does not alloy with brass and since its coefficient of expansion is virtually identical to that of brass, rapid temperature shocks (-50°C/200°C) do not cause blistering or cracking of the plating. The electrolytic potential of White Bronze is approxi- mately that of brass. Consequently, any White Bronze plated connectors in contact with stainless steel, silver, nickel or nickel containing finishes carry no risk of corrosion as a result of any chemical potential difference. Low RF Losses The relative permeability (µr) of the Tyco Electronics White Bronze is 1 giving rise to low RF losses even at high frequencies. As a direct result of the good conductivity of the finish, skin depth is minimized fur- ther reducing insertion loss and ensuring a better impedance match across the frequency range of the connectors. Non Magnetic Finish The Tyco Electronics White Bronze contains no ferrous materials and so has no magnetic properties. This is particularly desirable in many RF applications. Wear and Scratch Resistant The hardness of the Tyco Electronics White Bronze at 300-380HV is more than double that of sil- ver and marginally harder than platings containing nickel. This gives a scratch resistance which is rarely surpassed and makes it ideal for high mating applications. 279 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix B - White Bronze (Continued) White Bronze is available on all products, including 7-16, N, TNC, OSP and SMA. Low Coefficient of Friction The coefficient of friction is approximately 70% that of silver to give lower insertion forces and smoother coupling. These properties combine to produce a harder wearing, longer last- ing finish which prolongs connector life and reduces the ongoing cost of ownership. Tyco Electronics’ White Bronze Environmental Test Four groups of conditioning tests were performed to pro- vide a comprehensive evalu- ation of the Tyco Electronics White Bronze plated con- nector bodies. The tests were performed to the spec- ifications of the European and International RF con- nector standards - CECC 22000/ IEC 68-2-14/IEC 169- 1. Full details and relevant data are available from Tyco Electronics and results are summarized below. Test 1 - Industrial Atmosphere & Temperature Endurance

1.1 Industrial Atmosphere

Exposure to Sulphur Dioxide Atmosphere (as specified in IEC 68-2-42 Test Kc) for 21 days of mated connectors, previously subjected to 500 matings, to determine the influence of sulphur dioxide on the corrosion resistance properties of White Bronze Plating. Contact resistance measured after matings and sulphur dioxide expo- sure was less than 5% (0.23mohm) of the permissi- ble specification.

1.2 High Temperature

temperatures of 85°C ±5°C for 250 hours, to determine the impact of prolonged high temperatures on plating adhesion. Prior to testing the connectors were subject to 500 matings. Results showed no visual deteriora- tion in plating finish (blister- ing, cracking etc.) and the results of outer conductivity performance were compara- ble to Test 1 (above). Test 2 - Rapid Temperature Change & Damp Heat Steady State

2.1 Rapid Temperature

Change Exposure to -55°C and +85°C for 15 minutes, transition time 2-3 minutes, 50 cycles. To determine possible plating deteriora- tion caused by prolonged and rapid temperature change. No visual deterio- ration, outer conductivity performance were compa- rable with Test 1 (above).

2.2 Damp Heat Steady

State Exposure to 93% rel- ative humidity (at 40°C) for 10 days. To determine plat- ing adhesion. No visual deterioration, outer conduc- tivity performance were comparable with Test 1 (above). Test 3 - Soldering Heat

3.1 Resistance to Soldering

(250°C) for 10 seconds to evaluate any possible dete- rioration in plating finish. No deterioration detected. Test 4 - Salt Mist & Mechanical Endurance

4.1 Salt Mist

Exposure to salt mist spray (as defined in BS 2011 Pt.

2.1 Ka) for 48 hours to eval-

uate the uniformity of pro- tective coatings, any visual deterioration, or impact on electrical performance. No visual deterioration, outer conductivity performance were comparable with Test 1 (above).

4.2 Mechanical Endurance

Electrical and visual evalua- tion of the connectors after 500 matings to determine any electrical or visual deterioration. No visual deterioration, outer conduc- tivity performance were comparable with Test 1 (above). Availability and Ordering Tyco Electronics offers White Bronze on all prod- ucts including 7-16, N, TNC, SMA and OSP. For more information on White Bronze contact your local Tyco Electronics Sales Office.

Appendix C - Intermodulation in RF Coaxial Connectors Product Facts ■ High quality plating to 6µm for IM-sensitive products ■ Restrict materials to copper and its alloys ■ Avoid the use of stainless steel, nickel, ferrites, etc. in the signal path ■ Quality machining ■ Ensure, by design, a prop- erly defined contact inter- face at connector, panel and contact interfaces ■ Avoidance of crimps The increased demand from the mobile communication industry to provide greater channel capacity coupled with the increased sensitivity of receivers has exposed a condi- tion within RF Coaxial Connectors referred to as Intermodulation Distortion (IMD). This condition occurs when non-linearities within the connectors act as imperfect diodes to generate other frequencies known as Intermodulation Products (IMP). Some of these frequencies appear within the receive band and effectively block the channel. The purpose of this application note is to outline the basic causes of Intermodulation and the techniques Tyco Electronics has undertaken to minimize this condition. IM Basics Modern developments in base stations for GSM, DCS 1800 and PCS 1900 have necessitated the use of “7-16”, “4.1/9.5” and “N” connectors due to the increased power requirements. The requirements for performance are typically in the order of - 160 dBc to -163dBc (when working in dBc) or -120dBm (when working in dBm), both with 2 x (+43dBm) tones. The requirement is so stringent because the connectors are used in post-filtering sections of the transmit path (between the diplexer and the antenna) and also because the system is a full duplex system where the multiple-carrier transmit path is also the receive path. In a truly linear system, the output is directly proportional to the input, following the form of y=mx+c (see fig. 2). Coaxial connectors have traditionally been viewed as following this pattern. In reality, there have always been non-linearities present in coaxial con- nectors. These were not readily apparent as the resultant IM products were significantly below the noise floor of the system due to relatively weak carrier signals. This situation becomes apparent when the incident power is raised above 30 dBm. The small non-linearities have a character- istic similar to a square-law (see Fig 3). The distortion to the waveform is evident, the Linear vs. Non-linear Response 120 100 Non-linearLinear Fig. 2 Fig. 3 Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in all Tyco Electronics products. They can provide you with: ■ Technical Support ■ Catalogs ■ Technical Documents ■ Product Samples ■ Tyco Electronics Authorized Distributor Locations 281 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix C - Intermodulation in RF Coaxial Connectors (Continued) Spectrum of products in a 2-tone system Frequency (MHz) Fig. 4 Rx band Tx band 3F1-2F2 F1 F1 4F1-3F2 2F1-F2 2F2-F1 3F2-2F1 4F2-3F1 Carriers 120 100 Potential causes of IM in Coaxial Connectors There are numerous factors which can affect intermodula- tion performance in RF coaxial connectors. Identified below are the most likely sources of concern: ■ Contaminated plating solution ■ Insufficient plating thickness ■ Corrosion ■ Dissimilar metals in intimate contact ■ Magnetic materials in the signal path ■ Low contact pressure ■ Less than 360-degree contact ■ Poor surface finish ■ Debris and dust within the connector ■ Convoluted signal path Remedies for IM in RF Coaxial Connectors To combat the above identified IM sources, Tyco Electronics undertakes precautions during the design and manufacture of the product, as summarized below: ■ High quality plating to 6µm for IM-sensitive products The plating must also be free from contaminants and properly passivated with a chromate passivate. Silver has been the preferred plating material as it possesses the lowest practical resistivity thereby minimizing interface contact resistances. Tyco Electronics also offers a unique White Bronze plating finish which provides excellent durability, tarnish resistance and non-magnetic properties ideal for low intermodulation. During testing with a system noise floor of -145 dBm, the differ- ence in performance between the Tyco Electronics silver-plat- ing and the Tyco Electronics White Bronze finish is not discernible (refer to White Bronze Application Note 1307057). ■ Restrict materials to copper and its alloys. This ensures maximum plating adhesion and minimum electro- chemical potential difference between the base materials and their over-platings. ■ Avoid the use of stainless steel, nickel, ferrites, etc. in the signal path Magnetic and para-magnetic materials will only compound non-linearites and give poorer interface contact resistances. During experimentation, Tyco Electronics discovered a degra- dation in performance of 20dB when nickel plate was used. The presence of magnetic or para-magnetic materials will also cause the forward IMP figure to differ from the reverse IMP. ■ Quality machining Surface finish is paramount. The signal propagates within a “skin” if this skin is too rough, the signal will repeatedly transition through metal and surface oxide layers, thereby creating the same effect as a poor panel contact (see fig. 5). For IM-sensitive designs Tyco Electronics ensures 0.4µm is the maximum. ■ Contact design This primarily affects the connector interface. Repeated matings can generate small amounts of plating from the indi- vidual parts. These oxidize and interfere with the mechanical (and therefore electrical) mating of connectors. The oxidized debris gives further rise to metal and surface oxide junctions and consequently, higher IM products. ■ Ensure, by design, a properly defined contact interface at connector, panel and contact interfaces Insufficient contact force will give rise to metal to oxide junc- tions. The classic rectifiers were metal oxide by composition. Axial maximum material condition at the connector interface is critical in order to ensure minimum mismatch and maximum Effect of surface roughness Fig. 5 1.5 0.5 -0.5 -1.5

1 Oxide

positive 1/2 cycle being significantly greater in amplitude than the negative 1/2-cycle. When converted to the fre- quency domain, this waveform consists of the desired fun- damental plus a decaying series of related harmonics that, in themselves, interact with other carriers present on the transmission line. The effect of this interaction produces additional frequen- cies, some of which occur where they are least wanted (see fig. 4). The 2F1-F2 (3rd order IMP), 3F1-2F2 (5th order IMP) and 4F1-3F2 (7th order IMP) products can all mani- fest in the receive band and, if sufficiently large, effectively block a channel by making the base station receiver think that a carrier is present when one is not. IM Basics (Continued)

Appendix C - Intermodulation in RF Coaxial Connectors (Continued) potential of a butt-contact. Panel interfaces generally concern the physical contact of the connector body to the panel. In this case, it has been determined that a protruding feature as close as possible to the body bore will give the best IM performance. The applied mounting force is concentrated in the surface area of the protrusion which, on engagement with the panel, punctures the existing oxide layer to give a metal-to-metal, gas-tight junction. ■ Avoidance of crimps Crimps, by nature, can only give multiple point-contact rather than 360-degree contact and also cause a variability in the position of electrical contact during dynamic testing. IM prod- ucts will therefore be greater. It has been found that soldered center contacts and clamp/solder outer contacts give the best static and dynamic IM performance. Improving IM Connector Design Tyco Electronics continues to pursue design techniques which improve intermodulation performance to address emerging telecommunication market needs. A state of the art intermodu- lation test facility and participation on the international (IEC SC46D WG5) committee to develop standard test practices ensures our commitment to the understanding of intermodula- tion characteristics. This applied technology base is instrumen- tal in developing innovative low intermodulation products for 7-16, Type N, SMA and OSP interfaces. Most commonly asked questions regarding Intermodulation Why is intermodulation such a concern for cellular infrastructure equipment? The primary concerns for cellular service providers today are channel efficiency and clarity of transmission. Growth in demand for mobile communications has created a need to operate equipment at greater capacities and reliability to service the competitive market. Intermodulation degrades or limits the ability of the service provider to operate at optimal levels of performance and may ultimately cause subscribers to experience poor call quality. Intermodulation has become an important factor in system selection to ensure the best possible network service. Where is intermodulation most likely to occur in cellular infrastructure equipment? Intermodulation is typically of greatest concern between the filtering elements of the system and the antenna. The introduc- tion of higher power levels for the transmit side of the equip- ment creates greater potential for intermodulation to occur. This is why the majority of focus for intermodulation concerns 7-16, Type N, SMA and 4.1/9.5 connector interfaces. Is intermodulation a recent development? Intermodulation has always been inherently present in RF coax- ial connectors but may be relatively imperceptible in some devices for a variety of reasons. The amount of power applied to an RF connector determines the relative IM threshold which can be observed. Intermodulation is therefore more likely to cause concern in a higher power system, for example, utilizing a 7-16 connector interface rather than an equivalent low power OSX solution. The trend toward higher power digital cellular systems creates the need for greater intermodulation sensitivity. What is the best method of cable attachment for IM sensi- tive cable assembly applications? Soldering and clamping are preferred methods due to the 360-degree point of contact created at the cable to connector interface. Such intimate contact improves the overall contact resistance leading to improved IM characteristics. In addition, it is also better to solder the center conductor of the connector to the cable versus crimping due to the improved contact resistance path and elimination of voids. Are there ways to test for intermodulation in an RF coaxial connector? Yes, very sophisticated methods are needed to test for inter- modulation in RF connectors. The test system must utilize extremely sensitive filtering or clean amplification so that the equipment itself has a very low intermodulation noise floor. There is not yet a standardized approach to testing, although an international committee has been formed in the connector industry to address the situation. Tyco Electronics has a state of the art test facility where our designs are optimized for low intermod performance and where further analysis on the effects of this phenomena can be studied. Is intermodulation in coaxial connectors frequency dependent? No. Because coaxial connectors are broadband devices there is no frequency dependency. Some apparent variability can be detected during testing but this is not due to the connector. The impedance matches of the output diplexer/triplexer and terminations are the causes of the variations and should not be incorrectly attributed to the connector/assembly. Tyco Electronics Interconnect Business Unit has demonstrated that by varying the impedance match of the test station termi- nation, a DUT can show 15dB better IMP 3 than exists in reality. IMP3 in mixers follows a 3dB/dB relationship. What is it for connectors? The relationship is identical. Taking the 3rd order (2F1-F2): varying the power of F2 gives an IMP3 relationship of 1dB/dB whereas varying the power of F1 gives a relationship of 2dB/dB as the IMP is derived from the 2nd harmonic of F1. This gives a total of 3dB/dB when symmetrically varying both carrier powers. I am buying a complete cable assembly from Tyco Electronics. How do I interpret the IMP result now? With caution! It is the Tyco Electronics policy when testing devices to move away from the normal static test to a dynamic test where the cable termination interfaces are mechanically exercised during live IM conditions. It is also a good indicator to customers of the build quality of the assemblies. A dynamic evaluation has shown 15dB degradation in IMP performance for poor assemblies and even as much as 50dB for bad ones.It is therefore strongly advisable that IM performance fig- ures are stated in the context of a dynamic measurement. Remedies for IM in RF Coaxial Connectors (Continued) 283 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications Abbreviations Dielectric Conductors and Braid Materials Jacket Material FG Braid V ....Fiberglass, impregnated, Type V, per MIL-C-17D SIL/DAC-VI...Dacron braid over silicone rubber, Type VI, per MIL-C-17D Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2.17 .0285 2.17 .0285 2.17 .0285 2.17 .0285 2.17 .0285 2.17 .0285 2.17 .0285 1.21 .0159 1.21 .0159 1.21 .0159

Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 1.21 .0159 1.21 .0159 1.21 .0159 2.59 BC 16 .1250 PE 11.68 1/BC PVC-I 16 .254 52 29.5 /H1100240 /H1100180 6000 Use up to Tube .460 .630 1000 MHz 17B Cancelled, Reassigned New Nomenclature, RG 177 1.29 21 0508 PE 4.7 2/SC PVC-II 8.43 .087 53 29.0 /H1100240 /H1100180 2700 Use RG 222 High Res. Wire .185 .332 1.29 High Res. Wire .185 .332 2 Cond. 1.16 .0152 2 Cond. 1.16 .0152 2 Cond. 1.16 .0152 2 Cond. 2.17 2/Inidividual 16.51 x .490 .0285 Outer BC .945 2 Cond. 2.17 2/Individual 16.51 x .490 .0285 Outer BC .945 2 Cond. 2.17 2/Individual 25.48 .0285 Outer BC .780 285 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2 Cond. 2.17 2/Individual 25.48 .0285 Outer BC .780 1.49 .0117 1.49 .0117 2.35 .0185 2.35 .0185 0.81 BC .0477 2.17 .0285 2.17 .0285 2.17 .0285 1.9 .0249 1.9 34B .0747 PE 11.68 1/BC PVC-IIA 16 .224 75 20.6 /H1100240 /H1100180 6500 Use up to 7/0.63 BC .460 .630 1000 MHz .0249 2.91 BC 0.63 0.64 CCS 4.98 7.92 0.64 CCS 4.98 10.67 1.24 .0100 0.72 Res. Wire .196 .342

Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2 Cond. 2.17 .0285 1.21 .0159 1.16 .0152 1.49 .0117 2 Cond. 2.17 .0285 2 Cond. 2.17 .0285 0.9 .0071 0.61 .0080 1.49 7.82 12.57 .0117 .285 . 405 1.49 .0117 0.2 [.0080] Dia. Helix 287 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) .02 [.0080] Dia. Helix 1.49 .0117 1.49 .0117 2 Cond. 2.17 .0855 7.62 7.62 .0285 .650 .650 2.44 .0320 1.49 .0117 1.49 .0117 1.49 .0117 1.53 .0201 5.08 .0400

Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2.86 .0225 3.23 .0254 1.87 .0147 1.63 BC 14.94101 .0641 Rubber — 1/TC — .588 —7 5 — — — — 2 Cond. 102 2.05 BC Rubber — 1/TC — 27.64 — 140 — — — — .0808 1.088 2 Cond. 0.96 .0126 Each 2 Cond. 0.96 .0126 Each 2 Cond. 1.16 .0152 2 Cond. 1.16 .0152 2.13 .0280 2.13 .0280 2.44 .0320 0.76 .0050 1.55 .0203 289 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2 Cond. 2.17 .0285 2 Cond. 2.17 .0285 1.36 .0179 2 Cond. 1.83 BC Air-space145 .0720 PTFE — 1/BC Lead/Tar — — 75 14.6 — — — 2.17 .0285 1.22 .0159 1.22 .0159 2.17 .0285 2.55 .0201 5.05 .0284 4 Cond. 1.8 .0142 0.3 .004

Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2.44 .0320 2.44 .0320 0.48 .0063 0.48 .0063 Magnetic Core .285 .405 .195 .680 .895 RG 218 0.3 .0040 0.3 .0040 0.3 .0040 0.3 .0040 0.3 .0040 0.3 .0040 0.3 .0040 0.3 .0040 0.3 .0040 2 Cond. 1.21 2/Individual .0159 Outer BC 2 of 19/0.36 BC 2/ 8.43 Each Core .0066 .146 1/BC .2510 .632 .750 AM-5034S on PE Core PE .188 .282 Cable 291 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 0.3 .0040 0.3 .0040 0.51 .0067 0.51 .0067 1.49 .0117 0.3 .004 0.3 .004 0.3 .004 0.3 .004 OD-10.29 .301 4.8 .0378 .0253 PTFE .146 .242 Low Capacitance .1900 .620 .730 High Power .1900 .620 .730 High Power .0556 .185 .332 10,000 MHz 2.26 .0296

Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2.26 .0296 2.26 .0296 1.21 .0159 .106 PE .370 .545 1000 MHz .195 PE .680 .870 1000 MHz .195 PE .680 w/Armor .928 RG 218 .260 PE .910 1.120 1000 MHz .260 PE .910 w/Armor 1.178 RG 220 High Res. Wire .185 .332 Attenuation .035 PE .116 .211 10,000 MHz .106 PE .370 w/Armor .603 RG 217 2.38 .0312 3.23 .0254 2.38 .0312 .1900 PTFE .620 w/Armor .788 RG 211 .1900 PTFE .620 w/Armor .788 RG 211A 2.44 .032 5.05 .0284 None .500 .118 50 25.0 /H1100255 /H1100180 Peak Jacketed Cable .112 PE-IIIA 1.765 1.050 50 22.0 /H1100255 /H1100180 Peak — .481 PE-IIIA 3.295 3.110 50 22.0 /H1100255 /H1100180 Peak — 1.015 2.16 .0284 293 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) None 1.625 .930 50 22.0 /H1100255 /H1100180 4700 — .481 None 3.125 2.700 50 22.0 /H1100255 /H1100180 Peak — 1.0150 None 1.625 .948 75 15.0 /H1100255 /H1100180 Peak — 27.40 OD-9.5 BC 27.40 None 3.125 2.395 75 15.0 /H1100255 /H1100180 Peak — .632 PE-IIIA 2.805 .175 75 15.0 /H1100255 /H1100180 Peak — .632 None .953 1.200 50 24.0 /H1100255 /H1100180 1860 — .2550 None 1.786 1.380 50 24.0 /H1100255 /H1100180 3640 — .4860 PE 1.926 .100 50 24.0 /H1100255 /H1100180 3640 — .4860 2 TC, 2 BC e/core BC Overall .750

Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2 TC, 2 BC e/core BC Overall .750 2 BC, 2 TC e/core BC Overall .765 4 Coax. 0.29 Cond. Over 75 Spiral 3.66 Mag. Core .285 68 BC & 7 .400 50 ns/ft .144 are Insulated ID-7.29 .3580 Tube OD-7.29 .3580 Tube ID-14.94 .6880 Tube ID-14.94 .6880 Tube Cable High Temp. Cable .0050 .1144 PTFE .327 .468 High Frequency 4.8 .0378 1.49 .0117 OD-10.92 .3600 Tube OD-8.46 .2221 Tube OD-20.83 .7400 Tube 295 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) .106 PE .370 1/SC .545 RG 217 1 BC, 1 TC .472 .630 1 BC, 1 TC .472 .630 RG 130 295 4.95 BC 17.27 PE-IIIA 22.73 —5 0 30.8 /H1100255 /H1100180 11,000 Watertight .1950 PE .680 1/SC .895 RG 218 5.97 .0336 OD-9.02 .2870 Tube 15.32 .0201 1.55 .0203 .0250 PTFE .146 1/SC .201 RG 140 .0390 PTFE .116 1/SC .170 RG 141A 304 1.5 SCCS 4.7 FEP-IX 7.11 —5 0 29.4 /H1100255 /H11001200 300 FEP Jacketed .0590 PTFE .185 2/SC .280 RG 143A OD-10.92 .3600 Tube 0.74 .0058 0.74 .0058 0.51 .0067 2 Cond. 2.21 .0290 PE-IIIA 1.125 .530 50 22.0 /H1100255 /H1100180 Peak — .2870 PE-IIIA 2.000 1.040 50 22.0 /H1100255 /H1100180 Peak — .5580 Corr. BC Tube Corr. BC Tube 2.850 Peak Corr. BC Tube Corr. BC Tube Comp. 3.040 Peak

Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 2.54 .0200 5.08 .0400 8.13 .0640 1.49 .0117 6.15330 SC Foam PE — 1/SC — .242 —5 0 25.0 — — — .1620 Foam PE .450 .500 .600 Solid Conductor 374 0.72 BC 4.06 Foam PE 16.51 .097 — — /H1100255 /H1100180 — Buoyant .0285 PE .160 None .650 Antennna 2000 lb. Break .650 Twisted Pair 384 1.29 BC 1/Flat BC Braid Foam PE 16.51 —5 0 30.8 /H1100255 /H1100180 — Buoyant Antennna .0508 PE — Waterproofed .650 600 psig. 297 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS) 386 1.29 CCS None Foam PE 16.51 —— — /H1100255 /H1100180 — Buoyant Antennna .0508 PE — Non-hosing .650 400 lb. Break .2500 PE Spline .635 2/SC .875 Replaces RG 189 1.22 .0159 1.22 .0159 2.38 .0312 2.44 .032 0.98 .0077

0.3 SCCS

.004 .004

Appendix E - Maximum Power Handling Capabilities for Cables (Average Input Power in Watts) RG/U Frequency in MHz Type Cable 10 50 100 200 400 1,000 3,000 5,000 10,000 5, 5A, 5B 2,000 800 550 350 230 125 60 40 22 8, 8A, 10A, 213, 215 3,700 1,300 850 540 350 190 95 65 37 9, 9A, 9B, 214 3,700 1,300 850 540 350 190 95 65 37 11, 11A, 12, 12A, 13, 13A, 216 2,500 1,000 650 400 260 150 70 50 26 217 6,000 2,000 1,200 800 480 260 120 85 50 22, 22B 1,700 650 430 280 190 110 50 38 20 55, 55A, 55B, 223 800 310 205 137 90 53 28 20 10 58, 58B 730 280 180 125 85 50 25 17 — 58A, 58C 650 225 170 110 75 44 22 15 — 59, 59A, 59B 1,300 480 310 200 135 77 40 27 15 62, 62A, 71, 71A, 71B 1,300 480 310 200 135 77 40 27 15 62B 1,150 420 280 180 120 69 35 25 14 115, 115A, 165, 225, 393 25,000 9,500 6,300 4,300 2,800 1,700 880 620 350 108, 108A 340 145 100 70 50 30 15 — — 122 540 205 140 90 60 35 18 12 — 140, 141, 141A, 142, 142B, 302, 303, 400, 402 9,000 3,500 2,400 1,600 1,100 650 350 245 140 143, 143A 11,500 4,600 3,200 2,100 1,450 850 460 330 190 144 25,000 9,500 6,300 4,300 2,800 1,700 880 620 350 161, 179, 179A, 179B, 187, 187A 1,600 780 570 420 310 200 110 76 41 174, 174A 170 72 50 36 25 16 — — — 178, 178A, 178B, 196, 196A 710 340 240 170 123 78 41 28 14 180, 180A, 180B, 195, 195A 2,500 1,100 800 570 400 250 135 93 50 188, 188A, 316 1,250 600 450 330 240 160 80 57 30 210 8,500 3,300 2,300 1,600 1,100 620 310 220 140 Note: Values above 3 GHz vary considerably depending on construction. Conditions Ambient: 40°C Altitude: Sea level Center Conductor Temperature: 80°C for polyethylene 200°C for PTFE 299 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix F - Nominal Loss Characteristics for Cables (Decibels per Hundred Feet) RG/U Frequency in MHz Type Cable 10 50 100 200 400 1,000 3,000 5,000 10,000 Note: Values above 3 GHz vary considerably depending on construction. Conditions Ambient: 20°C

Appendix G - Glossary of Terms A ambient The atmospheric conditions surrounding a given item. Normally in terms of factors which influence or modify, such as temperature, humidity, etc. amplitude The magnitude of variation in a changing quantity from its zero value. The word requires modification - as with adjectives such as peak, maximum, rms, etc. - to designate the specific amplitude in question. arc voltage voltage that continues to pass through a surge protector dur- ing activation of GDT(approx. 20 volts ) attenuation A reduction in power. It occurs naturally during wave travel through lines, waveguides, space or a medium such as water. It may be pro- duced intentionally by placing an attenuator in a circuit. The amount of attenuation is generally expressed in decibels per unit of length. B back mounted A connector attached to the inside of a panel or box with its mounting flanges inside the equipment. bayonet coupling A quick coupling device for plug and receptacle con- nectors. Pins projecting from the outside of the cylindrical receptacle engage with corresponding cam slots in the bayonet plug. bellmouth Flared at the mouth. The rear of a properly crimped wire barrel will have a slight flare (bellmouth) to relieve the strain on the wire strands as they leave the area of high compression and take their natural “lay”. A bellmouth condition may also be present in front of the wire barrel. black box A term used to refer to any assembly or subassembly, usually electronic, that can readily be installed or removed from a larger system. BNC Connector A radio frequency connector covered by Military Specification. It has an impedance of 50 or 75 ohms, and is designed to operate in the 0 to 4 GHz frequency range. It features quick connect/discon- nect by pin and cam bayonet coupling. body Main or largest portion of a connector to which other portions are attached. braid A weave of metal fibers used as a shield covering for an insulated conductor or group of insulated conductors. When flattened it may be used as a grounding strap. broad-band E Interference generated over a wide range of frequencies (e.g., automotive ignition noise). bulkhead A term used to define a mounting style of connectors. Bulkhead connectors are designed to be inserted into a panel cutout from the rear (component side) of the panel. C cable Either a standard conductor, with or without insulation and other coverings, or a combination of conductors insulated from each other. cable assembly A completed cable and its associated hardware. capacitance The property of an electrical conductor (dielectric in a capacitor) that permits the storage of energy as a result of electrical dis- placement. The basic unit of capacitance is the farad, however, measure- ment is more commonly in microfarads or picofarads. cavity A metallic enclosure in some types of tubes and circuits within which resonant fields may be excited at the microwave frequency to which the cavity is tuned. Usually referred to as resonant cavity. See also: contact cavity. characteristic impedance The ratio of voltage to current at any point along a transmission line on which there are no standing waves. circular mil area (CMA) A unit of area equal to the area of a circle whose diameter is 1 mil (0.001 inch). Used chiefly in specifying cross- sectional areas of conductors. (See Tyco Electronics Brochure No. 4402-8, Computing Circular Mil Area for Tyco Electronics Terminals and Splices). closed entry contact A female contact designed to prevent the entry of a pin or probing device having a cross-sectional dimension (diameter) greater than the mating pin. coaxial cable A transmission line consisting of two conductors concen- tric with and insulated from each other. In its flexible form it consists of either a solid or stranded center conductor surrounded by a dielectric. A braid is then woven over the dielectric to form an outer conductor. A weath- erproof plastic covering, usually vinyl, is placed on top of the braid. connector A coupling device employed to connect conductors to one cir- cuit with those of another circuit. Used to provide rapid connect/disconnect mating with pc boards, posts or another connector. connector assembly Includes housing and contact plus additional com- ponents such as hardware used to hold the assembly together and/or make the assembly a functional connector. contact An electrically conductive component designed for use in a multi- circuit connector. contact cavity A defined hole in the connector insert or housing into which the contact must fit. See also: cavity. contact durability The number of insertion and withdrawal cycles that a connector must be capable of withstanding while remaining within the per- formance levels of the applicable specification. contact engaging and separating force Force required to either engage or separate contacts. Values are generally established for maximum and minimum forces. contact inspection hole A hole, perpendicular to the cylindrical rear portion of screw machined contacts, used to check the depth to which wire has been inserted into the barrel. contact resistance Measurement of electrical resistance of mated con- tacts when assembled in a connector under typical service use. Electrical resistance is determined by measuring from the rear of the electrical area of one contact to the rear of the contact area of the mating contact (excluding both crimps) while carrying a specified test current. contact shoulder The flanged or enlarged portion of a contact that pre- vents it from being over-inserted into the appropriate contact cavity. The shoulder may also contribute to proper orientation and stability with the connector housing. contact, two-piece A contact made of two separate parts joined by swedging, brazing or other means of fastening to form a single contact. While this provides the mechanical advantages of two metals, it also has the inherent electrical disadvantage of difference in conductivity. corona A discharge of electricity appearing as a bluish-purple glow on the surface of, and adjacent to, a conductor when the voltage gradient exceeds a certain critical value. It is caused by the ionization of surrounding air by high voltage. crimp The final configuration of a terminal barrel after the necessary com- pression forces have been applied to cause a functional union between the terminal barrel and the wire. crimp height A top to bottom measurement of the crimped barrel, using a crimp height comparator in the prescribed manner. (Refer to Tyco Electronics Instruction Sheet 7424). crimping dies A term used to identify the shaping tools that, when moved toward each other, produce a certain desirable shape to the barrel of the terminal or contact that has been placed between them. Crimping dies are often referred to as die sets or as die inserts. 301 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix G - Glossary of Terms (Continued) crimping head Tooling containing jaws and linkage for use in pneumatic or hydraulic powered units to crimp loose-piece contacts/terminals that may be too large for hand tool applications. crimping tool A term commonly used to identify a hand held mechanical device that is used to crimp a contact, terminal or splice. crosstalk A magnetic or electrostatic coupling which causes the unwanted transfer of energy from one circuit (disturbing circuit) to another circuit (disturbed circuit) current rating The maximum continuous electrical flow of current recom- mended for a given situation. It is expressed in amperes. cycle One complete sequence of values of an alternating quantity, includ- ing a rise to maximum in one direction and return to zero; a rise to maxi- mum in the opposite direction and return to zero. The number of cycles occurring in one second is called the frequency. D daisy chain A cable assembly with common wires jumpering three or more connections/connectors. The term is also used as a verb, implying to connect in jumper manner. dB Abbreviation — see decibel. D.C. sparkover voltage defined as the maximum voltage across a device before it discharges the energy to ground when subjected to a slowly rising voltage ramp. A rate of rise of 100V/s is usually chosen for testing purposes. decibel A unit expressing the ratio of two voltages, currents or powers. It is equal to 20 times the common logarithm of the ratio of two voltages across or two currents through equal loads, or 10 times the common loga- rithm of the two powers. One decibel is approximately the smallest change in audible power that can be recognized by the human ear. die closure Term used to designate a crimping area (crimping chamber) when the dies are fully closed or bottomed. Die closure is checked with go/no go plug gage to insure that the crimp produced by the tooling satis- fies the crimp height specification. dielectric A material that serves as an insulator. The amount of resistance to voltage in a given insulation. dielectric withstanding voltage The maximum potential gradient that a dielectric material can withstand without failure. discontinuity Rated interconnection: a broken connection (open circuit) or the loss of a specified connection characteristic. Transient phenomena: Short term (temporary) interruption or unacceptable variation in current or voltage. dissipation Unusable or lost energy, such as the production of unused heat in a circuit. distortion An unwanted change or addition to a signal or waveform when it is amplified. This definition excludes noise which is an extraneous signal superimposed on the desired signal. dummy load A dissipative device used at the end of a transmission line or waveguide to convert transmitted energy into heat, so essentially no energy is radiated outward or reflected back to its source. dust cap A device attached to a connector to provide protection against dust and foreign debris. E electromagnetic compatibility (EMC) The ability of an electronic device to operate in its intended environment without its performance being affected by EMI and without generating EMI that will affect other equipment. electromagnetic interference (EMI) Unwanted electrical or electro- magnetic energy that causes undesirable responses, degrading performance or complete malfunctions in electronic equipment. See also: noise. electromotive force (emf) See voltage. environmentally sealed A unit is provided with gaskets, seals, grom- mets, potting or other means to keep out moisture, dust, air or dirt which might reduce or impair its performance. F feedthrough A connector or terminal block, usually having double-ended terminals, which permits distribution and bussing of electrical circuits. Also used to describe a bushing in a wall or bulkhead, separating compartments at different pressure levels, with terminations on both sides. ferrule A short tube used to make solderless connections to shielded or coaxial cable. Also molded into the plastic inserts of multiple contact con- nectors to provide strong, wear-resistant shoulders on which contact retain- ing springs can bear. flange A projection extending from or around the periphery of a connector and having holes that provide for mounting the connector to a panel or to a mating connector. frequency modulation (fm) A scheme for modulating a carrier fre- quency in which the amplitude remains constant but the carrier frequency is displaced in frequency proportionally to the amplitude of the modulating signal. An fm broadcast is practically immune to atmospheric and man- made interference. fretting corrosion A form of excellerated oxidation that appears at the interface of contacting materials undergoing slight cyclic relative motion. All non-nobel metals (tin) are susceptible to some degree of fretting corrosion and will suffer contact resistance increases. front mounted A connector is said to be front mounted when it is attached to the outside of the mating side of a panel. A front mounted con- nector can only be installed or removed from the outside of the equipment. G gas discharge tube (GDT) hermetically sealed device containing an inert gas. GHz See gigahertz. giga A prefix meaning one billion (10 9). gigahertz (GHz) One billion cycles per second (109 cps). glow mode condition in which the GDT continues to conduct after an impulse passed. Characterized by a visible glow in the device caused by over-heating. ground A connection, intentional or accidental, between an electrical circuit and the earth or some conducting body (e.g. chassis) serving in place of earth. H heat-shrinkable A type of plastic material that has been cross-linked. A term describing tubes, sleeves, caps, boots, films or other forms of plastic which shrink to encapsulate, protect or insulate connections, splices, termi- nations and other configurations. hermetic Airtight, impervious to external influence, as in a hermetic pack- age. Often used to describe metal-to-metal solder or weld-sealed packages.

Appendix G - Glossary of Terms (Continued) hermetic seal Hermetically sealed connectors are usually multiple contact connectors where the contacts are bonded to the connector by glass or other materials and permits maximum leakage rate of gas through the connector of 1.0 micron ft./hr. at one atmosphere pressure for special applications. hertz (Hz) International standard term for cycles per second. Named after the German physicist Heinrich R. Hertz (e.g., 60 cycles per second is equal to 60 hertz or 60 Hz). I impedance (Z) The total opposition offered by a component or circuit to the flow of alternating or varying current. Impedance is expressed in ohms and is similar to the actual resistance in a direct current circuit. In computa- tions, impedance is handled as a complex ratio of voltage to current. impedance match A condition in which the impedance of a component or circuit is equal to the internal impedance of the source, or the surge impedance of a transmission line. This gives maximum transfer of energy from the source to the load, as well as minimum reflection and distortion. impulse discharge current is defined as the peak current of an impulse which the device can with- stand ten times (5 of each polarity at fixed time intervals) without sub- stantially affecting device perform- ance. The test normally used to determine this capacity uses the 8/20ms waveform as depicted below where T1=8ms and T2=20ms. impulse sparkover voltage defined as the maximum level of voltage across a device before it discharges the energy to ground when subjected to a voltage impulse. The three common waveform profiles used to determine this capacity are: inductance One cause of reactance. An electromagnetic phenomenon in which the expanding and collapsing of a magnetic field surrounding a con- ductor or device tends to impede changes in current. The effects of induc- tance become greater as frequencies increase. The basic unit for inductance is the henry. input impedance The impedance that exists between the input terminals of an amplifier or transmission line when the source is disconnected. The circuit, signal level and frequency must be specified. insertion loss The loss in load power due to the insertion of a compo- nent, connector or device at some point in a transmission system. Generally expressed in decibels as the ratio of the power received at the load before insertion of the apparatus, to the power received at the load after insertion. insulation crimp The area of a terminal splice or contact that has been formed around the insulation of a wire. insulation grip The ability of certain crimped terminals to hold firmly in place both the conductor and a small portion of insulation. This prevents the conductor from being exposed due to insulation receding away from the terminal. insulation resistance The electrical resistance between two conductors separated by an insulating material. interface The two surfaces of a multiple-contact connector that face each other when the connector is assembled. interference An electrical or electromagnetic disturbance that causes undesirable response in electronic equipment. J jack A connecting device into which a plug can be inserted to make circuit connections. The jack may also have contacts which open or close to per- form switching functions when the plug is inserted or removed. See also: receptacle. L line impedance Impedance as measured across the terminals of a trans- mission line; frequently the characteristic impedance of the line. M matched impedance The coupling of two circuits in such a way that the impedance of one circuit equals the impedance of the other. mate Two join two connectors in a normal engaging mode. maximum discharge current defined as the peak current of an impulse which the device can withstand once without substantially affecting device performance. mega (M) A prefix meaning one million (10 6). microwave That portion of the electromagnetic spectrum lying between the far infrared and conventional radio frequency range. The microwave fre- quency range extends from 1 GHz to 300 GHz. Microwaves are usually used in point-to-point communications because they are easily concentrated into a beam. Military Specification Military requirements. The demand imposed upon a system to meet a military operational need. mismatch The condition in which the impedance of a source does not match or equal the impedance of the connected load. This reduces power transfer by causing reflection. N narrow-band EMI generated from a device operating at a specific and limited range of frequencies. See also: electromagnetic interference (EMI). N Connector A large radio frequency connector covered by Military Specification. It has an impedance of 50 ohms and is designed to operate in the 0 to 11 GHz frequency range. It has a threaded coupling and is physi- cally larger than a TNC connector. noise An extraneous signal in an electrical circuit, capable of interfering with the desired signal. Classes of noise include burst of popcorn noise, intermediate frequency noise at low audio frequencies, white (thermal) noise, etc. Signals from power supply or ground line coupled into an ampli- fier output may be considered noise. O “O” crimp An insulation support crimp for open barrel terminals and contacts. In its crimped form it resembles an “O” and conforms to the shape of the round wire insulation. “O” crimp is also used to describe the circum- ferential crimps used on COAXICON ferrules. T1 = 1.25T tT A B I 1-0 0-1 0-5 0-9 T2 =1.67T t TL 01T A T 0.3 0.5 0.9 1.0 V 303 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Appendix G - Glossary of Terms (Continued) ohm The unit of measurement for electrical resistance. A circuit is said to have a resistance of one ohm when an applied emf of one volt causes a cur- rent of one ampere to flow. P panel mount A method of fixing a connector to a board, panel or frame. The mounted connector is usually the receptacle or female connector. The plug or male connector is usually the removable portion. pcb Abbreviation: see printed circuit board. permeability (chemical) The passage or diffusion (or rate of passage) of a gas, vapor, liquid or solid through a barrier without physically or chem- ically affecting it. permeability (magnetic) The measure of how much better a material is than air as a path for magnetic lines of force. Air is assumed to have a per- meability of 1. plug In coaxial RF connectors the plug is usually the movable portion, and is usually attached to a cable or removable assembly. Plugs mate with receptacles, jacks, outlets, etc. printed circuit board An insulating board serving as a base for a printed circuit. When the printing process is completed, the board may include printed components, as well as printed wiring. propagation delay Time required for an electronic digital device, or transmission network to transfer information from its input to its output. propagation delay time The time between the application of a digital input waveform and the corresponding change in input waveform. It is measured between reference points on the waveforms. The time is generally different for positive-going and negative-going waveforms. prototype A model suitable for use in the complete evaluation of form, design and performance. pulse A change in the level, over a relatively short period of time, of a sig- nal whose value is normally constant. pulse width The length of time that the pulse voltage is at the transient level. Electronic pulse widths are usually in the millisecond (10 -3), microsecond (10-6) or nanosecond (10-9) range. R receptacle In coaxial RF connectors, the receptacle is usually the fixed or stationary portion that is mounted to the panel. In shell-type, multiple- contact connectors the receptacle usually contains the pin contacts and is mounted on the “cold” side of a circuit such as in a drawer or black box. Receptacles mate with plugs. See also: jack. residual impulse defined as the voltage that will pass through the device prior to activation of the GDT. residual voltage defined as the small amount of voltage left on the line after an impulse passes. resonance A frequency at which captive reactance and inductive reactance are equal and therefore cancel one another’s effects. RF Abbreviation for radio frequency. RG/U Symbol used to designate coaxial cables that are made to Government Specification (e.g., RG 58U; in this designation the “R” means radio frequency, the “G” means Government, the “58” is the number assigned to the government approval, and the “U” means it is a universal specification). rise time The time required for a component or logic circuit to change from the quiescent to the transient state when an input is applied. (i.e. elapsed time between application of input and attainment of full output level). rms Abbreviation for root mean square. root mean square The effective value of an alternating current, corre- sponding to the direct current value that will produce the same heating effect. S screw machine contact A contact which is machined from solid bar stock. semi-rigid A cable containing a flexible inner core and a relatively inflexi- ble sheathing. sheath The outer covering of a jacket over the insulated conductors to provide mechanical protection for the conductors. Also known as the exter- nal conduction surface of a shielded transmission line. shield/shielding (cable) A conducting envelope, composed of metal strands, which enclose a wire, group of wires or cable so constructed that substantially every point on the surface of the underlying insulation is at ground potential or at some predetermined potential with respect to ground. shield/shielding (circuit) The metal sleeving surrounding one or more of the conductors in a wire circuit to prevent interference, interaction or cur- rent leakage. Shielding protects a circuit against crosstalk. shock (mechanical) (1) An abrupt impact applied to a stationary object. (2) An abrupt or nonperiodic change in position, characterized by sudden- ness, and by the development of substantial internal forces. SHV Abbreviation for standard high voltage. sine wave A wave which can be expressed as the sine of a linear function of time, space or both. A waveform, often viewed on an oscilloscope, of a pure alternating current or voltage. skin effect The tendency of alternating currents to flow near the surface of the conductor, thus being restricted to a small part of the total cross-sec- tional area. This effect increases the resistance and becomes more marked as the frequency rises. sleeve The insulated or metallic covering over the barrel of a terminal. solder contact A contact or terminal having a cup, hollow cylinder, eyelet or hook to accept a wire for a conventional soldered termination. standard high voltage (SHV) A quick connect/disconnect connector series employing a bayonet lock coupling and designated to operate safely up to 5000 volts AC. It is the industry standard connector specified by the National Bureau of Standards (NBS) for high voltage use by the Atomic Energy Commission (AEC). standing-wave Distribution of current and voltage on a transmission line, resulting from two sets of waves traveling in opposite directions. standing wave ratio The ratio between maximum and minimum current or voltage along a line. It is a measure of the mismatch between the load and the line. It is equal to 1 when the line impedance is perfectly matched to the load. (In which case the maximum and minimum are the same, as cur- rent and voltage do not vary along the line). The perfect match would be a 1 to 1 ratio. super high frequency (shf) The Federal Communications Commission designation for the band from 3,000 to 30,000 MHz in the radio spectrum. T tensile The amount of axial load (longitudinal stress) required to break or pull the wire from the crimped barrel of the terminal, splice or contact.

Appendix G - Glossary of Terms (Continued) tensile strength The greatest longitudinal stress that a substance or union can bear without tearing or pulling apart. In crimped terminations, it is the greatest longitudinal stress that a terminal can bear without the wire separating from the terminal. thermal shock The effect of heat or cold applied at such a rate that nonuniform thermal expansion or contraction occurs within a given material or combination materials. The effect can cause inserts and other insulation materials to pull away from metal parts. time-delay A circuit that delays the transmission of an impulse for a defi- nite and desired period of time. TNC Connector A radio frequency connector covered by Military Specification. It has an impedance of 50 ohms and is designed to operate in a 0 to 11 GHz frequency range. Reliability is assured by a threaded coupling that can be safely wired to prevent accidental disconnect. U UG Symbol used to describe coaxial connectors that were made to a Government specification. This specification is now obsolete. ultra-high frequency (uhf) A Federal Communications Commission designation for the band from 300 to 3000 MHz on the radio spectrum. In television - channels 14 to 83 or 470 to 890 MHz. V very high frequency (vhf) A Federal Communications Commission designation for the band from 30 to 300 MHz on the radio spectrum. voice-frequency (vf) Any frequency within that part of the radio fre- quency range essential to speech transmission of a commercial quality (i.e., 300 to 3400 Hz). Also referred to as telephone frequency. volt (V) The unit of measurement for electromotive force (emf). It is equiva- lent to the force required to produce 1 ampere through a resistance of 1 ohm. voltage (E) The term most often used to designate electrical pressure that exists between two points and is capable of producing a flow of current when a closed circuit is connected between the two points. Voltage is meas- ured in volts, millivolts, microvolts and kilovolts. The terms electromotive force (emf), potential, potential difference and voltage drop are often referred to as voltage. voltage drop The voltage developed across a component or conductor by the flow of current through the resistance or impedance of that component or conductor. voltage hold over refers to the maximum line voltage at which recovery of the GDT to its inactive state will take place within a specified period of time (normally 150ms) after an induced lightning pulse (normally 10/1000ms) has been applied. VSWR Abbreviation for voltage standing wave ratio. Also see: standing wave ratio. W wavelength The distance between two points which are in phase on adja- cent waves. It is the distance traveled by the wave in the same span of one cycle. Electromagnetic waves (both light and radio) have a speed in space of about 300,000,000 meters (186,000 miles) per second. Thus wavelength in meters is equal to 300,000,000 divided by frequency. Z Z Letter symbol used to represent impedance in ohms. 305 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors RF Coaxial Solutions for Communications Equipment Wireless Base Station Carrier Rack Equipment Chassis NIC Card Set Top Box

7-16 Series Connectors, Page 7 Lightning Protection Connectors, Page 12 7-16 Series Cable Assemblies, Page 269 N Series Cable Assemblies, Page 269 MCX Connectors, Page 196 SSMT Connectors, Page 212 SMP Subminiature Blindmate Connectors, Page 152 DIN Inserts, Page 238 COAXICON Contacts, Page 244 SIEMAX Connectors, Page 249 N Series Connectors, Page 20 TNC Connectors, Page 29 SMA Connectors Page 100 SMB Connectors Page 176 Radio base station cabinets demand packaging that combines high power r.f. signals, high speed digital data, and analog signals. Cabinet input/output con- nections are provided by N Series and 7/16 connectors. Plug-in r.f. modules require Blindmate, DIN inserts, and panel mount connectors. Transceiver modules utilize MCX, and SSMT board and cable connectors for board to board and panel to board applications. Finally, both semi-rigid and flexible RG cable assemblies route signals throughout the entire cabinet. 307 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Carrier Rack Equipment G Series Connectors, Page 98 F Series Connectors, Page 93 MMCX Connectors, Page 218 BNC Connectors, Page 44 SMA Connectors, Page 100 SMB Connectors, Page 176 TNC Connectors, Page 29 DIN Inserts, Page 238 SIEMAX Connectors, Page 249 For today’s fast paced Carrier Equipment market, Tyco Electronics offers a broad line of RF intercon- nect products that meet demanding customer requirements for CATV, tele- com and data transmission applications. Connectors, cable assemblies, and applicator tooling are avail- able for applications rang- ing from central office to customer premise environ- ments, 50 or 75 ohms, from rack based equipment to set top boxes. Styles range from standard miniature RF connectors such as F series, BNC and TNC to subminiature RF connectors such as SMA, SMB, SMC and Blindmate connectors, to Micro miniature MMCX, SSMT and SMT/QuickGrip products. SIEMAX connec- tors provide multi-positional surface mount technology RF connection for pcb and panel applications, and offer superior packaging density. Between Series adapters are available, along with connectors meeting international DIN and IEC standard inter- faces. High performance GHz range BNC connectors meet the needs for faster signaling.

Chassis, NIC Card and Set Top Box Coaxial interconnects have evolved in the enterprise market place over the years. The BNC interfaces that once dominated the Ethernet premise installa- tions to coax products that provide high speed access to the carrier infrastructure. In today’s environment, Network Interface Cards (NIC) still feature Capacitively Decoupled BNC connectors with built- in chip capacitors to reduce noise and ground loop currents. For the infrastructure, the standard coaxial interfaces to the infrastructure include both 50 and 75 ohm BNC connectors. The BNC fam- ily features numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. To address manufacturabil- ity, we offer the board mount in SMT, wave solder, and press fit. More recently, the SMB interface is the one of choice for improved density and is available in both commercial and MIL-type. Again, our portfolio has a wide variety of configura- tions to address your sys- tem requirements. Lastly, as broadband CATV becomes more prevalent for internet access in cable modems, our family of F connectors offer a high performance solution. BNC Connectors, Page 44 SMB Connectors, Page 176 F Connectors, Page 93 Decoupled BNC, Page 82NIC Card Chassis Set Top Box 309 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 222092-1 5222092-1 222092-3 5222092-3 222093-1 5222093-1 222117-1 5222117-1 222132-1 5222132-1 222165-2 5222165-2 222420-1 5222420-1 222462-1 5222462-1 222506-1 5222506-1 222506-5 5222506-5 222506-6 5222506-6 225089-4 5225089-4 225092-8 5225092-8 225349-9 5225349-9 225361-2 5225361-2 225361-4 5225361-4 1-225361-2 1-5225661-2 225363-1 5225363-1 225392-2 5225392-2 225395-1 5225395-1 225395-2 5225395-2 225395-3 5225395-3 225395-6 5225395-6 225395-7 5225395-7 225395-8 5225395-8 1-225395-0 1-5225395-0 2-225395-0 2-5225395-0 4-225395-1 4-5225395-1 4-225395-2 4-5225395-2 225396-1 5225396-1 225396-2 5225396-2 225396-7 5225396-7 225397-1 5225397-1 225397-2 5225397-2 225397-7 5225397-7 225398-1 5225398-1 225398-3 5225398-3 225398-6 5225398-6 225398-7 5225398-7 225398-8 5225398-8 1-225398-5 1-5225398-5 225554-6 5225554-6 1-225554-1 1-5225554-1 225555-2 5225555-2 225555-6 5225555-6 225555-7 5225555-7 225555-8 5225555-8 225557-6 5225557-6 225559-2 5225559-2 225559-8 5225559-8 225661-1 5225661-1 225661-2 5225661-2 1-225661-3 1-5225661-3 1-225661-6 1-5225661-6 225662-2 5225662-2 1-225662-8 1-5225662-8 225664-1 5225664-1 225664-2 5225664-2 1-225664-2 1-5225664-2 1-225667-6 1-5225667-6 225669-1 5225669-1 Non-RoHS RoHS Compliant Part No. Part No. 13126-1 Exempt 13127-1 Exempt 59980-1 Exempt 69477-1 Exempt 69710-1 Exempt 148385-1 5148385-1 148386-1 5148386-1 189721-1 Exempt 220015-1 Exempt 220220-2 Exempt 220221-2 Exempt 220222-2 Exempt 220224-1 Exempt 221111-1 5221111-1 221123-2 5221123-2 221128-1 5221128-1 1-221128-0 1-5221128-0 1-221128-1 1-5221128-1 1-221128-7 1-5221128-7 2-221128-1 2-5221128-1 2-221128-3 2-5221128-3 2-221128-7 2-5221128-7 3-221128-1 3-5221128-1 221162-1 5221162-1 221185-1 5221185-1 221185-2 5221185-2 221185-3 5221185-3 221185-5 5221185-5 221185-7 5221185-7 221185-8 5221185-8 221185-9 5221185-9 1-221185-0 1-5221185-0 1-221185-8 1-5221185-8 2-221185-9 2-5221185-9 3-221185-1 3-5221185-1 221198-1 5221198-1 221199-1 5221199-1 221199-2 5221199-2 221199-5 5221199-5 221221-1 5221221-1 221221-2 5221221-2 221221-5 5221221-5 221221-7 5221221-7 221244-1 5221244-1 221325-1 5221325-1 221336-3 5221336-3 221336-4 5221336-4 221402-2 5221402-2 221402-4 5221402-4 221506-2 5221506-2 221506-3 5221506-3 221506-5 5221506-5 221629-1 5221629-1 221629-2 5221629-2 221629-4 5221629-4 221629-5 5221629-5 221629-6 5221629-6 1-221629-6 1-5221629-6 221980-1 5221980-1 221981-2 5221981-2 222006-1 5222006-1 Non-RoHS RoHS Compliant Part No. Part No. 225669-2 5225669-2 225699-1 5225699-1 225886-1 5225886-1 225886-4 5225886-4 225886-5 5225886-5 225886-7 5225886-7 225974-1 5225974-1 225974-2 5225974-2 225974-5 5225974-5 226978-1 5226978-1 226978-3 5226978-3 226990-1 5226990-1 226990-3 5226990-3 226990-6 5226990-6 226993-1 5226993-1 226993-2 5226993-2 226993-3 5226993-3 226993-6 5226993-6 227079-5 5227079-5 227079-6 5227079-6 227079-7 5227079-7 1-227079-1 1-5227079-1 1-227079-6 1-5227079-6 1-227079-9 1-5227079-9 2-227079-2 2-5227079-2 4-227079-3 4-5227079-3 5-227079-3 5-5227079-3 6-227079-1 6-5227079-1 6-227079-7 6-5227079-7 6-227079-8 6-5227079-8 8-227079-2 8-5227079-2 1-227086-0 1-5227086-0 227161-1 5227161-1 227161-2 5227161-2 227161-3 5227161-3 227161-6 5227161-6 227161-7 5227161-7 227161-9 5227161-9 227169-5 5227169-5 227169-7 5227169-7 227169-8 5227169-8 227222-1 5227222-1 227222-2 5227222-2 227222-3 5227222-3 227222-6 5227222-6 227426-1 5227426-1 227661-1 5227661-1 227671-1 5227671-1 227673-1 5227673-1 227676-1 5227676-1 227677-1 5227677-1 227699-1 5227699-1 227699-2 5227699-2 227699-3 5227699-3 227716-3 5227716-3 227726-1 5227726-1 227726-2 5227726-2 227726-3 5227726-3 227755-1 5227755-1 227755-2 5227755-2 227755-3 5227755-3 Non-RoHS RoHS Compliant Part No. Part No. 227764-2 5227764-2 227818-1 5227818-1 227820-1 5227820-1 227839-1 5227839-1 228217-1 5228217-1 228226-1 5228226-1 228226-3 5228226-3 228435-1 5228435-1 228596-1 5228596-1 228596-2 5228596-2 228596-3 5228596-3 228596-4 5228596-4 228596-5 5228596-5 228618-1 5228618-1 228618-2 5228618-2 228618-3 5228618-3 228618-4 5228618-4 228618-5 5228618-5 228686-1 5228686-1 228979-5 5228979-5 228979-6 5228979-6 228979-7 5228979-7 228980-5 5228980-5 228980-6 5228980-6 228980-7 5228980-7 307581-1 Exempt 311386-1 Exempt 311386-2 Exempt 311386-3 Exempt 311392-1 Exempt 311395-1 Exempt 311396-1 Exempt 312067-1 Exempt 312253-1 Exempt 312253-2 Exempt 312317-1 Exempt 2-329444-1 2-5329444-1 2-329444-2 2-5329444-2 2-329445-1 2-5329445-1 2-329446-1 2-5329446-1 2-329452-2 2-5329452-2 2-329456-1 2-5329456-1 2-329458-1 2-5329458-1 329517 5329517 2-330061-1 2-5330061-1 2-330062-1 2-5330062-1 2-330063-1 2-5330063-1 2-330358-2 2-5330358-2 330876 5330876 330878 5330878 331175 5331175 331178 5331178 331182 5331182 331238 5331238 332215 5332215 332225-3 5332225-3 332225-5 5332225-5 332225-6 5332225-6 332225 5332225 332342 5332342 413194-1 5413194-1 Non-RoHS RoHS Compliant Part No. Part No. RF Coax Connectors Non-RoHS to RoHS Compliant Part Number Cross Reference

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued) 413194-2 5413194-2 413311-1 5414311-1 413364-2 5413364-2 413366-2 5413366-2 413476-2 5413476-2 413506-1 5413506-1 413515-2 5413515-2 413515-3 5413515-3 413515-7 5413515-7 413515-8 5413515-8 413515-9 5413515-9 413524-2 5413524-2 413524-5 5413524-5 413557-1 5413557-1 413557-2 5413557-2 413558-1 5413558-1 413558-2 5413558-2 413558-3 5413558-3 413558-5 5413558-5 413588-2 5413588-2 413588-4 5413588-4 413588-8 5413588-8 413588-9 5413588-9 1-413588-0 1-5413588-0 413589-1 5413589-1 413589-2 5413589-2 413589-3 5413589-3 413589-5 5413589-5 413589-7 5413589-7 413589-8 5413589-8 413589-9 5413589-9 1-413589-0 1-5413589-0 1-413589-1 1-5413589-1 1-413589-6 1-5413589-6 413590-3 5413590-3 413590-4 5413590-4 413590-8 5413590-8 413591-1 5413591-1 413592-2 5413592-2 413592-6 5413592-6 413592-9 5413592-9 1-413592-1 1-5413592-1 413631-1 5413631-1 413631-2 5413631-2 413631-3 5413631-3 413760-1 5413760-1 413760-3 5413760-3 413760-8 5413760-8 413760-9 5413760-9 413771-1 5413771-1 413771-3 5413771-3 413779-3 5413779-3 2-413779-4 2-5413779-4 413879-1 5413879-1 413879-2 5413879-2 413933-1 5413933-1 413959-1 5413959-1 413959-3 5413959-3 413959-4 5413959-4 413959-5 5413959-5 413959-6 5413959-6 Non-RoHS RoHS Compliant Part No. Part No. 413969-2 5413969-2 413986-1 5413986-1 414088-1 5414088-1 414094-2 5414094-2 414105-1 5414105-1 414160-5 5414160-5 414168-1 5414168-1 414168-3 5414168-3 414168-4 5414168-4 414168-5 5414168-5 414168-6 5414168-6 414170-1 5414170-1 414170-2 5414170-2 414171-3 5414171-3 414173-3 5414173-3 414194-1 5414194-1 414215-1 5414215-1 414217-1 5414217-1 414265-3 5414265-3 414284-2 5414284-2 414305-1 5414305-1 414337-1 5414337-1 414338-1 5414338-1 414352-1 5414352-1 414363-3 5414363-3 414363-4 5414363-4 414363-5 5414363-5 414363-8 5414363-8 414367-2 5414367-2 414373-1 5414373-1 414394-1 5414394-1 414409-1 5414409-1 414414-1 5414414-1 414459-1 5414459-1 414460-1 5414460-1 414493-4 5414493-4 414553-1 5414553-1 414651-3 5414651-3 414666-1 5414666-1 414758-1 5414758-1 414758-2 5414758-2 414758-3 5414758-3 414907-1 5414907-1 414946-2 5414946-2 414946-3 5414946-3 414946-5 5414946-5 414946-6 5414946-6 415006-1 5415006-1 415006-2 5415006-2 415020-1 5415020-1 415024-1 5415024-1 415024-3 5415024-3 415025-1 5415025-1 415025-2 5415025-2 415046-1 5415046-1 415085-1 5415085-1 415103-1 5415103-1 415103-2 5415103-2 415105-1 5415105-1 415105-2 5415105-2 415187-1 5415187-1 Non-RoHS RoHS Compliant Part No. Part No. 415189-1 5415189-1 415205-1 5415205-1 415214-1 5415214-1 415216-1 5415216-1 415218-5 5415218-5 415226-1 5415226-1 415232-4 5415232-4 415232-7 5415232-7 415242-2 5415242-2 415242-6 5415242-6 415248-1 5415248-1 415248-7 5415248-7 415252-1 5415252-1 415252-2 5415252-2 415252-3 5415252-3 415252-4 5415252-4 415255-1 5415255-1 415255-2 5415255-2 415255-3 5415255-3 415255-4 5415255-4 415276-2 5415276-2 415302-1 5415302-1 415302-2 5415302-2 415322-2 5415322-2 415332-1 5415332-1 415379-1 5415379-1 415381-1 5415381-1 415406-2 5415406-2 415417-1 5415417-1 415419-1 5415419-1 415485-1 5415485-1 415485-2 5415485-2 415485-3 5415485-3 415487-1 5415487-1 415487-2 5415487-2 415487-3 5415487-3 415520-1 5415520-1 415569-2 5415569-2 415632-1 5415632-1 415632-2 5415632-2 415633-1 5415633-1 415634-1 5415634-2 415634-2 5415634-2 415683-1 5415683-1 415712-1 5415712-1 415779-1 5415779-1 415832-1 5415832-1 447648-3 5447648-3 448103-2 5448103-2 603995-1 Exempt 603995-2 Exempt 603995-3 Exempt 603995-5 Exempt 603995-6 Exempt 856402-1 Exempt 887000-1 5887000-1 887046-1 5887046-1 887078-1 5887078-1 887089-1 5887089-1 1055439-1 Exempt 1055440-1 Exempt Non-RoHS RoHS Compliant Part No. Part No. 1055441-1 Exempt 1055442-1 Exempt 1055443-1 Exempt 1055444-1 Exempt 1055445-1 Exempt 1055446-1 Exempt 1055447-1 Exempt 1055448-1 Exempt 1055449-1 Exempt 1055450-1 Exempt 1055451-1 Exempt 1055454-1 Exempt 1055474-1 Exempt 1055475-1 Exempt 1055476-1 Exempt 1055477-1 Exempt 1055500-1 Exempt 1055831-1 Exempt 1055832-1 Exempt 1055833-1 Exempt 1055834-1 Exempt 1055836-1 Exempt 1055837-1 Exempt 1055838-1 Exempt 1055839-1 Exempt 1055840-1 Exempt 1055841-1 Exempt 1055842-1 Exempt 1055843-1 Exempt 1057088-1 6057088-1 1057094-1 6057094-1 1057116-1 6057116-1 1057159-1 6057159-1 1057165-1 6057165-1 1057176-1 6057176-1 1059632-1 6059632-1 1059665-1 6059665-1 1061002-1 6061002-1 1061035-1 6061035-1 1061092-1 6061092-1 1061094-1 6061094-1 1213890-1 Exempt 1274020-1 6274020-1 1274032-1 6274032-1 1274045-1 6274045-1 1274072-1 6274072-1 1274084-1 6274084-1 1274086-1 6274086-1 1274096-1 6274096-1 1274124-2 6274124-2 1274127-1 6274127-1 1274220-1 6274220-1 1274291-1 6274291-1 1274291-2 6274291-2 1274314-1 6274314-1 1274315-1 6274315-1 1274359-1 6274359-1 1274360-1 6274360-1 1274425-2 6274425-2 1274431-1 6274431-1 1274532-1 6274532-1 Non-RoHS RoHS Compliant Part No. Part No. RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued) 1361137-1 6361137-1 1361138-1 1361138-1 1361139-1 6361139-1 1362765-1 6362765-1 1363524-1 6363524-1 1363525-1 6363525-1 1363526-1 6363526-1 1363527-1 6363527-1 1393488-3 Exempt 1393488-4 Exempt 1393524-1 Exempt 1393524-4 Exempt 1393524-5 Exempt Non-RoHS RoHS Compliant Part No. Part No. 1311164-1 Exempt 1312079-1 6312079-1 1312113-1 6312113-1 1312121-1 6312121-1 1312123-1 6312123-1 1312124-1 6312124-1 1312137-1 1312137-1 1312138-1 6312138-1 1312139-1 6312139-1 1328873-1 6328873-1 1329818-1 6329818-1 1329819-1 1329819-1 1331959-1 6331959-1 Non-RoHS RoHS Compliant Part No. Part No. 1-1393524-1 Exempt 2-1393524-4 Exempt 2-1393524-6 Exempt 2-1393524-7 Exempt 1393665-1 6-1393665-1 1-1393665-4 — 1-1393665-5 — 1-1393665-6 — 1-1393665-7 — 2-1393670-1 — 2-1393670-2 — 2-1393670-3 — 2-1393670-4 — Non-RoHS RoHS Compliant Part No. Part No. 1393696-2 6-1393696-2 1393696-7 6-1393696-7 1402314-1 1402314-1 1408026-1 6408026-1 1408027-1 6408027-1 1408028-1 6408028-1 1408030-1 6408030-1 1408032-1 6408032-1 1408033-1 6408033-1 1408036-1 6408036-1 1408037-1 6408037-1 1408038-1 6408038-1 1725637-1 Exempt Non-RoHS RoHS Compliant Part No. Part No. RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 127669-92 1311164-1 127893-98 1402314-1 2001 5003 02 1050525-1 2001 5031 02 1050542-1 2001 5032 02 1050548-1 2001 5385 02 1050598-1 2001 5395 02 1050602-1 2001 5443 02 1050611-1 2001 7188 02 1050721-1 2001 7641 02 1050740-1 2001 7941 02 1050757-1 2001 7985 02 1050770-1 2002 5015 00 1050854-1 2002 5016 00 1050859-1 2002 7188 02 1050903-1 2004 7188 02 1050996-1 2004 7641 02 1051005-1 2004 7685 02 1051007-1 2006 5010 00 1051046-1 2006 5013 00 1051052-1 2006 7941 00 1051081-1 2006 7985 00 1051085-1 2007 7188 02 1051140-1 2007 7641 02 1051145-1 2007 7685 02 1051147-1 2007 7941 02 1051151-1 2007 7985 02 1051157-1 2031 5002 00 1051638-1 2031 5003 02 1051644-1 2032 5002 00 1051852-1 2032 5003 02 1051855-1 2032 5007 00 1051861-1 2032 5021 02 1051867-1 2032 5026 02 1051869-1 2034 5008 00 1051942-1 2037 5005 02 1052063-1 2037 5006 02 1052067-1 2037 5007 02 1052072-1 2037 5008 02 1052076-1 2037 5100 02 1052098-1 2051 0000 02 1052324-1 2051 1352 02 1052349-1 2051 1618 02 1052360-1 2052 0000 02 1052422-1 2052 1200 02 1052518-1 2052 1201 00 1052522-1 2052 1201 02 1052523-1 2052 1215 02 1052528-1 2052 1300 02 1052534-1 2052 1350 02 1052544-1 2052 1352 02 1052552-1 2052 1612 02 1052563-1 2052 1658 02 1052577-1 2052 3354 02 1052628-1 2052 3356 02 1052634-1 2052 3358 02 1052643-1 2052 3359 02 1052646-1 2052 3363 02 1052652-1 2052 3500 02 1052684-1 2052 3502 02 1052689-1 2052 5636 02 1052898-1 M/A-COM Tyco Electronics Part No. Part No. 2052 5674 02 1052902-1 2054 1201 02 1052978-1 2054 1231 02 1052982-1 2054 1241 02 1052986-1 2056 5006 02 1053092-1 2058 5029 02 1053222-1 2062 0000 00 1053354-1 2064 0000 00 1053378-1 2080 0000 00 1053488-1 2081 0000 02 1053635-1 2081 2301 00 1053646-1 2082 2249 02 1053780-1 2082 2700 00 1053788-1 2082 5133 02 1054426-1 2084 0000 02 1054869-1 2086 0000 02 1055018-1 2087 1230 02 1055047-1 2088 0000 02 1055065-1 2098 5206 54 1055439-1 2098 5207 54 1055440-1 2098 5208 54 1055441-1 2098 5209 02 1055442-1 2098 5210 02 1055443-1 2098 5211 02 1055444-1 2098 5212 02 1055445-1 2098 5213 02 1055446-1 2098 5214 02 1055447-1 2098 5215 02 1055448-1 2098 5216 54 1055449-1 2098 5217 54 1055450-1 2098 5218 02 1055451-1 2098 5221 10 1055454-1 2098 5279 10 1055474-1 2098 5281 02 1055475-1 2098 5282 02 1055476-1 2098 5283 02 1055477-1 2098 5516 02 1055500-1 2204 7941 09 1082029-1 2207 7985 09 1088312-1 2231 7388 36 1082034-1 2318 0000 54 1085456-1 2367 0000 54 1251802-1 2367 5001 54 1083946-1 2367 5002 54 1055689-1 2380 2240 00 1055694-1 2381 2241 00 1055695-1 2382 2240 00 1055696-1 2382 2241 00 1055697-1 2399 5011 54 1086008-1 2399 5012 54 1086009-1 2598 5196 54 1055831-1 2598 5197 54 1055832-1 2598 5198 54 1055833-1 2598 5199 54 1055834-1 2598 5201 54 1055836-1 2598 5202 54 1055837-1 2598 5203 54 1055838-1 2598 5204 54 1055839-1 2598 5205 54 1055840-1 2598 5206 54 1055841-1 2598 5207 54 1055842-1 M/A-COM Tyco Electronics Part No. Part No. 2598 5208 54 1055843-1 2598 5342 54 1221286-1 2598 5438 54 1088313-1 2831 7316 02 1056436-1 2831 7341 02 1056438-1 2831 7388 02 1056443-1 2834 7316 02 1056445-1 2834 7341 02 1056447-1 2834 7358 02 1056450-1 2834 7388 02 1056452-1 2837 7316 02 1056456-1 2837 7388 02 1056462-1 2902 7947 62 1056526-1 2902 7985 62 1056527-1 2908 7947 62 1056553-1 2908 7985 62 1056554-1 2965 5006 62 1061692-1 2980 0000 62 1056700-1 2980 2240 00 1056702-1 2981 2241 00 1056706-1 2982 2240 00 1056707-1 2982 2241 00 1056708-1 2998 5001 02 1056721-1 2998 5002 02 1056722-1 2998 5003 02 1056724-1 2998 5022 94 1056728-1 2998 5028 02 1056729-1 2998 5030 02 1056731-1 2998 5035 02 1056736-1 2998 5043 02 1056743-1 2998 5044 02 1056744-1 2998 5045 02 1056745-1 2998 5054 94 1056750-1 2998 5055 94 1056751-1 2998 5056 94 1056752-1 3001 7941 00 6057088-1 3001 7985 00 6057094-1 3002 7941 00 6057116-1 3004 7941 00 6057159-1 3004 7985 00 6057165-1 3006 7941 00 6057176-1 3051 0000 10 1057275-1 3051 1200 10 1057277-1 3051 1201 10 1057279-1 3052 0000 10 1057284-1 3052 1201 10 1057290-1 3080 2240 00 1057341-1 3080 2242 00 1057343-1 3081 2241 00 1057367-1 3082 0000 00 1057374-1 3082 2240 00 1057377-1 3082 2241 00 1057381-1 3082 2243 00 1057385-1 3082 2310 00 1057387-1 3082 2311 00 1057388-1 3082 2320 00 1057390-1 3082 2321 00 1057392-1 3084 2240 00 1057463-1 3101 7941 00 1057631-1 3101 7985 00 1057635-1 3104 7941 00 1057676-1 M/A-COM Tyco Electronics Part No. Part No. 3104 7985 00 1057679-1 3106 7941 00 1057697-1 3106 7985 00 1057699-1 3152 0000 10 1057775-1 3152 1201 10 1057780-1 3180 2242 00 1057841-1 3180 2302 00 1057843-1 3180 2320 00 1057845-1 3182 2240 00 1057853-1 3182 2243 00 1057857-1 3184 2240 00 1057908-1 3280 2224 00 1058056-1 3280 2240 00 1058058-1 3281 2223 00 1058066-1 3282 2223 00 1058077-1 3282 2240 00 1058081-1 3282 2241 00 1058083-1 3284 2240 00 1058117-1 3680 2240 00 1058651-1 3680 2242 00 1058653-1 3682 2241 00 1058664-1 3682 2242 00 1058666-1 3684 2240 00 1058675-1 4503 7685 02 1059399-1 4503 7941 00 1059402-1 4503 7985 00 1059404-1 4504 7641 02 1059408-1 4504 7941 00 1059410-1 4504 7985 00 1059412-1 4506 7641 02 1059451-1 4506 7685 02 1059452-1 4506 7941 02 1059453-1 4506 7985 02 1059456-1 4510 7941 00 1059465-1 4510 7985 00 1059467-1 4522 7941 02 1059505-1 4522 7985 02 1059506-1 4533 7388 02 1059523-1 4534 7341 02 1059525-1 4536 5014 02 1058572-1 4536 7341 02 1059540-1 4536 7388 02 1059541-1 4540 7388 02 1059551-1 4551 1201 02 1059563-1 4551 1352 02 1059566-1 4551 3357 02 1059572-1 4552 1201 02 1059594-1 4552 1352 02 1059596-1 4557 5009 02 1059617-1 4557 5119 02 6059632-1 4557 5329 02 1059637-1 4557 5368 02 1059651-1 4558 1154 02 1059654-1 4558 5009 02 1059657-1 4558 5119 02 6059665-1 4558 5329 02 1059671-1 4562 0000 00 1059681-1 4563 0000 00 1059684-1 4563 5004 00 1253111-1 4565 0000 00 1059691-1 4580 2240 02 1059707-1 M/A-COM Tyco Electronics Part No. Part No. RF Coax Connectors M/A-COM to Tyco Electronics Part Number Cross Reference

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 M/A-COM to Tyco Electronics Part Number Cross Reference (Continued) 5837 5025 10 1330723-1 5837 5030 10 1329293-1 5837 5031 09 1363301-2 5837 5031 10 1363301-1 5858 0000 09 1060959-1 5858 0000 10 1060960-1 5862 5002 09 1060984-1 5862 5002 10 1060985-1 5862 5003 09 1330126-1 5862 5003 10 1060989-1 5862 5004 09 1060995-1 5862 5004 10 1060996-1 5862 5007 13 6061002-1 5862 5018 13 1061007-1 5863 0000 09 1085221-1 5863 0000 10 1061015-1 5864 5001 09 1061022-1 5864 5001 10 1061023-1 5864 5002 09 1061026-1 5864 5002 10 1061027-1 5864 5003 09 1061029-1 5864 5003 10 1061030-1 5864 5008 13 6061035-1 5880 2240 00 1061070-1 5881 2241 00 1061071-1 5882 2240 00 1061072-1 5882 2241 00 1061073-1 5899 5004 54 6061092-1 5899 5009 54 6061094-1 7081 2301 00 1061738-1 7081 2311 00 1061739-1 7081 5008 00 1061742-1 7081 5009 00 1061744-1 7082 2242 00 1061750-1 7082 2243 00 1061751-1 7082 2300 00 1061752-1 7082 2310 00 1061753-1 7082 5004 00 1061757-1 7082 5005 00 1061758-1 9631 7179 10 1362990-1 9637 7179 10 1362991-1 9662 5000 10 1361169-1 9664 0000 10 1363106-1 9960 1100 24 1064524-1 9960 1200 24 1064530-1 9960 1305 24 1064533-1 9960 2100 24 1064535-1 9960 2200 24 1064538-1 9960 2305 24 1064540-1 9960 2510 24 1064542-1 M/A-COM Tyco Electronics Part No. Part No. 4581 2241 02 1059711-1 4581 2700 00 1059713-1 4582 2240 02 1059716-1 4582 2241 02 1059718-1 4582 2700 00 1059720-1 4583 2240 02 1059724-1 4584 2240 02 1059729-1 4584 2242 02 1059731-1 4584 2244 02 1059733-1 4585 2240 02 1059756-1 4585 2241 02 1059758-1 4703 7985 00 1059857-1 4706 7985 02 1059868-1 4710 7985 00 1059874-1 4733 7316 02 1059884-1 4733 7388 02 1059886-1 4736 5001 02 1059887-1 4736 7316 02 1059888-1 4740 7388 00 1059889-1 4751 3355 02 1059894-1 4757 1154 02 1059901-1 4757 3204 00 1059902-1 4757 5006 02 1059903-1 4757 5014 00 1059905-1 4763 0000 00 1059919-1 5001 5015 09 1060163-1 5007 5008 09 1060183-1 5031 5007 09 1060220-1 5031 5014 09 1060221-1 5062 5003 09 1060256-1 5064 5003 09 1060259-1 5134 5016 10 1254781-1 5180 2240 00 1060487-1 5181 2241 00 1060494-1 5182 2240 00 1060498-1 5182 2241 00 1060500-1 5801 7947 09 1060772-2 5801 7985 09 1060772-1 5802 7947 09 1060774-2 5802 7985 09 1060774-1 5807 7985 09 1060787-1 5818 5002 09 1060811-2 5818 5002 10 1060811-1 5818 5003 10 1060813-1 5831 5002 10 1060869-1 5831 5003 09 1060871-1 5831 5003 10 1060872-1 5831 7316 09 1060875-2 5831 7316 10 1060875-1 5834 7388 10 1060883-1 M/A-COM Tyco Electronics Part No. Part No. 9960 3100 24 1082845-1 9960 4100 01 1064543-1 9960 4100 02 1064544-1 9960 4100 04 1064546-1 9960 4100 07 1064549-1 9960 4100 08 1064550-1 9960 4200 01 1064552-1 9960 4200 02 1064553-1 9960 4200 04 1064555-1 9960 4200 07 1064558-1 9960 4200 08 1064559-1 9960 4305 01 1064560-1 9960 4305 02 1064561-1 9960 4305 04 1064563-1 9960 4305 07 1064566-1 9960 4305 08 1064567-1 9980 4100 01 1329174-1 9980 4100 02 1329175-1 9980 4100 04 1408050-4 9980 4100 05 1255378-4 9980 4100 07 1408051-4 9980 4100 08 1330401-4 9980 4200 01 1329174-2 9980 4200 02 1329175-2 9980 4200 04 1408050-5 9980 4200 05 1255378-5 9980 4200 07 1408051-5 9980 4200 08 1330401-5 9980 4305 01 1310432-1 9980 4305 02 1329175-3 9980 4305 04 1408050-6 9980 4305 05 1255378-6 9980 4305 07 1408051-6 9980 4305 08 1330401-6 A55P22E999X 1311206-1 A55P23E999X 1313453-1 A55X01B999X 6312079-1 A57R03G999X 1311209-1 B67A54T022X 1311097-1 B67A54T117X 1311098-1 B67A64T022X 1311099-1 B67A64T062X 1311100-1 B67A64T280X 1311696-1 B67A64T437X 1311102-1 B67A64TA25X 1313507-1 B67B42T022X 1311103-1 B67B42T437X 1311104-1 B67B44T022X 1311106-1 B67B44T062X 1311698-1 B67B44T437X 1311111-1 M/A-COM Tyco Electronics Part No. Part No. B67B44TA25X 1313508-1 B67E64T022X 1408041-1 B67H16T493X 1313511-1 B67H49T022X 1311115-1 B67H64T022X 1327083-1 B67H64T062X 1311117-1 B67H64T117X 1311700-1 B67H64T280X 1313883-1 B67H64T437X 1311118-1 B67H64TA25X 1313887-1 B67H66T022X 1311120-1 B67H66T062X 1311701-1 B67H66T437X 1311122-1 B67H74T463X 1314422-1 B67N08T999X 1311125-1 B67N12T999X 1314103-1 B67N25T999X 1314102-1 B67P34G999X 1313364-1 B67R53G999X 1311127-1 B67Z50T999X 6-1311703-1 C65E06G022X 1311638-1 D75A02B001X 6331959-1 D75A02B004X 6362765-1 D75B01B470X 6328873-1 D75B02B010X 6408028-1 D75B03B001X 6408030-1 D75B03B004X 6312113-1 D75B04B004X 6408027-1 D75B04B010X 6408026-1 D75B05B004X 6408038-1 D75G03B001R 6408032-1 D75G03B004R 6408033-1 D75G07B060R 6363524-1 D75G08B001R 6363525-1 D75G08B004R 6363526-1 D75G09B010R 6363527-1 D75G10B004R 6408036-1 D75R02B999X 6408037-1 D75X06B999X 6312121-1 D75X12E470X 6312123-1 D75X14B999X 6312124-1 D75X15B999X 6361137-1 N15X09E470X 1312137-1 N15X10B999X 6312138-1 N15X12E470X 6329818-1 N15X14E010X 6312139-1 N15X16E999X 1361138-1 N15X17E999X 6361139-1 N15X18E010X 1329819-1 T35E60E010X 1312569-1 M/A-COM Tyco Electronics Part No. Part No. RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. RF Coax Connectors 1052689 120 1052898 118 1052902 119 1052978 117 1052982 117 1052986 117 1053092 115 1053222 117 1053354 121 1053378 121 1053488 122 1053635 122 1053646 256 1053780 123 1053788 259 1054426 123 1054869 123 1055018 122 1055047 123 1055065 122 1055689 214 1055694 217, 255 1055695 217, 253 1055696 217, 258 1055697 217, 259 1056436 106 1056438 106 1056443 106 1056445 107 1056447 107 1056450 107 1056452 107 1056456 108 1056462 108 1056526 154 1056527 154 1056553 154 1056554 154 1056700 152, 154 1056702 255 1056706 253 1056707 258 1056708 259 1056721 152, 155 1056722 155 1056724 155 1056728 156 1056729 155 1056731 155 1056736 155 1056743 155 1056744 155 1056745 155 1056750 156 1056751 156 1056752 156 1057275 24 1057277 24 1057279 24 1057284 24 1057290 24 1057341 254 Part No. Page 50084 246 50095 246 50105 246 50107 246 51563 247, 248 51565 248 51692 21 51751 194 201097 245 201098 245 201143 245 201144 245 201145 245 201146 245 221108 58, 72, 73 221500 41 221509 42 221539 94 221540 94 221543 63 221551 64 221586 63 221789 121 221790 121 221951 55, 56 221988 63 222163 61, 74 222428 52 225014 22 225088 248 225093 22 225094 23 225348 38 225389 22 225551 35 225668 23 225886 49 226023 247 226060 247 226537 248 227223 55, 56 227945 25 228179 33 228215 182 228216 182 228502 37 228553 179 228658 23 282938 97 329631 57, 58, 59 73, 91 329632 57, 58, 59, 73, 91 330022 65 330024 64 330620 54 332056 248 332057 248 413453 65 Part No. Page 413985 178 413990 180 413996 181 414002 178 414026 181 414171 35 414396 43 414612 180 414766 94 414895 182 414946 178 414948 179 414963 181 414969 182 415001 182 415232 21 415327 99 415340 181 415377 185 415380 181 415381 181 415490 185 415500 184 415504 185 415523 99 415567 76 415672 181 415774 180 415796 64 619028 230, 235 619041 230 619052 235 619053 236 619061 230, 231 619062 230, 231 619068 235 619072 230, 231 619075 233 619076 235 619078 230, 235 619085 131 619106 136 619107 133 619115 115 619127 204 619133 232 619134 204 619135 204 619137 235 619196 234 619201 233 619210 236 619211 234 619213 234 619214 236 619215 127 619219 261 619220 136 619223 131 619224 131 619226 135 619228 135 Part No. Page 619229 206 619231 233 619238 206 619271 261 887098 94 1050525 110 1050542 110 1050548 110 1050598 112 1050602 112 1050611 112 1050721 105 1050740 112 1050757 110 1050770 110 1050854 110 1050859 110 1050903 105 1050996 106 1051005 113 1051007 113 1051046 111 1051052 111 1051081 111 1051085 111 1051140 106 1051145 113 1051147 113 1051151 112 1051157 112 1051638 104 1051644 104 1051852 104 1051855 107 1051861 104 1051867 107 1051869 107 1051942 104 1052063 105 1052067 105 1052072 108 1052076 108 1052098 108 1052324 114 1052349 116 1052360 118 1052422 114 1052518 116 1052522 116 1052523 116 1052528 119 1052534 114 1052544 114 1052552 116 1052563 118 1052577 119 1052628 120 1052634 120 1052643 120 1052646 120 1052652 120 1052684 120 Part No. Page Part Number Index

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Part Number Index (Continued) RF Coax Connectors 1059617 165 1059637 167 1059651 165 1059654 165 1059657 165 1059671 168 1059681 166 1059684 166 1059691 166 1059707 255 1059711 253 1059713 256 1059716 259 1059718 257 1059720 257 1059724 255 1059729 255 1059731 255 1059733 255 1059756 259 1059758 257 1059857 171 1059868 171 1059874 171 1059884 172 1059886 172 1059887 172 1059888 172 1059889 172 1059894 175 1059901 173 1059902 175 1059903 173 1059905 175 1059919 174 1060163 194 1060183 195 1060220 194 1060221 194 1060256 195 1060259 195 1060487 255 1060494 253 1060498 258 1060500 258 1060772 199 1060774 199 1060787 200 1060811 198 1060813 198 1060869 198 1060871 198 1060872 198 1060875 198 1060883 199 1060959 201 1060960 201 1060984 200 1060985 200 1060989 200 1060995 200 1060996 200 Part No. Page 1057343 254 1057367 253 1057374 25 1057377 258 1057381 257 1057385 257 1057387 258 1057388 257 1057390 257 1057392 257 1057463 254 1057631 33 1057635 33 1057676 37 1057679 37 1057697 38 1057699 38 1057775 41 1057780 41 1057841 254 1057843 254 1057845 254 1057853 258 1057857 258 1057908 255 1058056 254 1058058 254 1058066 253 1058077 257 1058081 258 1058083 257 1058117 254 1058572 163 1058651 255 1058653 255 1058664 257 1058666 259 1058675 255 1059399 162 1059402 158, 160 1059404 158, 160 1059408 162 1059410 158, 160 1059412 158, 160 1059451 162 1059452 162 1059453 160 1059456 160 1059465 161 1059467 161 1059505 161 1059506 161 1059523 163 1059525 163 1059540 163 1059541 163 1059551 163 1059563 164 1059566 164 1059572 168 1059594 164 1059596 164 Part No. Page 1061007 201 1061015 200 1061022 201 1061023 201 1061026 201 1061027 201 1061029 201 1061030 201 1061070 254 1061071 253 1061072 258 1061073 256 1061692 156 1061738 256 1061739 256 1061742 256 1061744 256 1061750 259 1061751 256 1061752 257 1061753 258 1061757 256 1061758 258 1064524 214 1064530 214 1064533 214 1064535 215 1064538 215 1064540 215 1064542 215 1064543 216 1064544 216 1064546 216 1064549 217 1064550 217 1064552 216 1064553 216 1064555 216 1064558 217 1064559 217 1064560 216 1064561 216 1064563 216 1064566 217 1064567 217 1082029 111 1082034 106 1082845 215 1083946 214 1085221 200 1085456 209 1086008 209 1086009 209 1088312 112 1088313 209 1221286 217 1251802 214 1253111 166 1255378 211 1274007 77 1274191 239 1274192 239 Part No. Page 1274330 181 1274449 133 1274513 145 1274520 133 1274544 134 1274563 80 1274566 80 1274568 80 1274571 81 1274572 81 1274584 81 1274594 133 1274662 28 1274663 81 1274668 57 1274684 81 1274688 27 1274689 27 1274694 109 1274714 137 1274734 27 1274735 27 1274794 237 1274795 237 1274804 27 1274805 27 1274806 27 1274807 28 1274808 28 1274935 76 1310432 210 1311097 187 1311098 187 1311099 187 1311100 187 1311101 187 1311102 187 1311103 188 1311104 188 1311106 188 1311111 188 1311115 189 1311117 190 1311118 190 1311120 189 1311122 189 1311125 190 1311127 191 1311206 254 1311209 254 1311638 194 1311696 187 1311698 188 1311700 190 1311701 189 1311703 191 1312137 18 1312569 35 1313364 191 1313453 253 1313507 187 1313508 188 Part No. Page

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Part Number Index (Continued) RF Coax Connectors 5329458 53 5329517 64 5330061 47 5330062 51 5330063 53 5330358 48 5330876 47 5330878 49 5331175 50 5331178 50 5331182 50 5331238 36 5332215 92 5332225 90 5332342 90 5413194 72 5413364 65 5413366 63 5413476 85 5413506 43 5413515 85 5413524 85 5413557 65 5413558 75 5413588 68 5413589 66, 67 5413590 67, 70 5413591 42 5413592 63 5413631 62 5413760 69 5413771 53, 54 5413779 51 5413879 57 5413933 40 5413959 50 5413969 60 5413986 74 5414088 74 5414094 85 5414105 64 5414160 21 5414168 36 5414170 179 5414171 35 5414173 34 5414194 56 5414215 85 5414217 71 5414265 50 5414284 85 5414305 60 5414311 63 5414337 181 5414338 181 5414352 85 5414363 178 5414367 88 5414373 62 5414394 74 5414409 72 5414414 64 Part No. Page 1313511 189 1313883 190 1313887 190 1314102 190 1314103 190 1314422 190 1327083 190 1329174 210 1329175 210 1329293 198 1329819 18 1330126 200 1330401 211 1330723 198 1361138 18 1361169 203 1362990 203 1362991 203 1363106 203 1363301 198 1392019 240 1392020 240 1393562 137, 147 1393662 241 1393665 148, 149, 150, 253, 256, 259 1393668 240 1393670 131, 132, 133, 134, 135, 136, 147, 253, 256, 259, 260 1393672 141, 142, 143 1393680 140, 142, 143, 144 1393681 140, 141, 143, 145, 146, 150 1393682 140, 141, 142, 143, 144 1393696 250 1393757 142, 145, 220 1402314 15 1407578 208 1408041 188 1408050 211 1408051 211 1408120 221 1408148 219 1408149 219 1408150 220 1408151 220 1408152 221 1408312 219 1408313 219 1408314 219 1408332 127 1408333 126 1408336 126 1408337 127 1408338 126 1408339 126 1408340 128 1408341 128 1408342 128 1408343 128, 260 1408346 125 Part No. Page 1408347 125 1408348 125 1408349 125 1408393 128, 253 1408496 220 1408541 109 1442004 206 1460010 131 1460052 10 1460055 25 1460060 134 1460118 25 1460128 144 1460132 141 1460139 134 1460159 9 1460169 144 1460468 115 1460469 115 1460470 195 1460802 261 1460803 261 1460815 135 1460817 135 1460821 147, 148 1460823 146 1484546 174 1566230 224 1658260 204 1750107 225 1750108 225 1750109 225 1750110 226 1775146 224 1775227 227, 260 1775228 227, 260 1775229 227, 259 1775230 227, 259 5148385 239 5148386 239 5221111 180 5221123 60 5221128 47, 48, 49, 55 5221162 243 5221185 66 5221198 91 5221199 69 5221221 70 5221244 71 5221325 41 5221336 75 5221402 68 5221506 42 5221629 65 5221980 242 5221981 242 5222006 61 5222092 72 5222093 72 5222117 76 5222132 73 5222165 64 Part No. Page 5222420 60 5222462 74 5222506 32 5225089 24 5225092 21 5225349 34 5225361 21 5225363 23 5225392 21 5225395 47, 48, 49 5225396 51 5225397 52 5225398 53, 54 5225554 34 5225555 32 5225557 36 5225559 34 5225661 21 5225662 21 5225664 22 5225667 23 5225669 22 5225699 21 5225886 49 5225974 50 5226978 59 5226990 57 5226993 58 5227079 47, 48, 49 5227086 21 5227161 57 5227169 55 5227222 58 5227426 56 5227661 57 5227671 58 5227673 58 5227676 57 5227677 57 5227699 60 5227715 55 5227716 55 5227726 56 5227754 55 5227755 55 5227764 40 5227818 39 5227820 39 5227839 39 5228217 179 5228226 64 5228435 181 5228596 242 5228618 242 5228686 91 5228979 51 5228980 53, 54 5329444 48 5329445 49 5329446 47 5329452 51 5329456 54 Part No. Page

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Part Number Index (Continued) RF Coax Connectors 5415255 22 5415276 96 5415302 95 5415322 97 5415332 98 5415379 181 5415406 98 5415417 72 5415419 72 5415484 184 5415487 184 5415520 73 5415569 95 5415632 73 5415633 72 5415634 72 5415683 98 5415712 95 5415779 87 5415832 92 5447648 107 5448103 107 5887000 98 5887046 97 5887078 95 5887089 97 6057088 21 6057094 21 Part No. Page 5414459 72 5414460 60 5414493 87 5414553 87 5414651 86 5414666 64 5414758 87 5414907 72 5414946 178 5415006 179 5415020 76 5415024 96 5415025 62 5415046 57 5415085 86 5415103 85 5415105 72 5415187 71 5415189 60 5415205 86 5415214 96 5415216 86 5415218 57 5415226 94 5415232 21 5415242 22 5415248 23 5415252 24 Part No. Page 6057116 22 6057159 23 6057165 23 6057176 23 6059632 167 6059665 167 6061002 202 6061035 202 6061092 202 6061094 202 6274020 97 6274032 98 6274045 98 6274072 72 6274084 72 6274086 71 6274096 121 6274124 75 6274127 75 6274291 74 6274314 61 6274315 61 6274359 74 6274360 74 6274425 76 6274431 133 6274532 21 6311225 10 Part No. Page 6312079 14 6312113 9 6312121 15 6312123 19 6312124 19 6312138 15 6312139 19 6328873 10 6329818 17 6331959 9 6361137 17 6361139 19 6362765 9 6363524 11 6363525 11 6363526 11 6363527 11 6408026 10 6408027 10 6408028 9 6408030 9 6408032 10 6408033 10 6408036 11 6408037 11 6408038 10 6408399 18 Part No. Page 13126 268 13127 268 21027 268 58318 268 58433 266 58483 192 58489 192 59980 267, 268 59981 268 69477 266 69710 266 189721 266 220015 266 220220 268 220221 268 220222 268 220224 268 220241 268 307581 268 308075 268 311386 268 311392 268 Part No. Page 311395 268 311396 268 312067 268 312253 268 312317 268 354500 267 603995 267 856402 266 1055420 263 1055439 262, 263 1055440 262, 263 1055441 262, 263 1055442 263 1055443 263 1055444 263 1055445 263 1055446 263 1055447 263 1055448 263 1055449 263 1055450 263 1055451 263 Part No. Page 1055454 263 1055469 262 1055474 262 1055475 262 1055476 262 1055477 262 1055500 263 1055831 263 1055832 263 1055833 263 1055834 263 1055835 263 1055836 263 1055837 263 1055838 263 1055839 263 1055840 263 1055841 263 1055842 263 1055843 263 1213890 266 1311164 191 Part No. Page 1393488 265 1393494 265 1393524 264 , 265 1725837 266 1775231 227 M22520/36-01 268 M22520/36-02 268 M22520/36-03 268 M22520/36-04 268 M22520/36-05 268 M22520/36-06 268 M22520/36-07 268 M22520/36-08 268 M22520/36-09 268 M22520/36-10 268 M22520/36-11 268 M22520/36-12 268 M22520/36-13 268 MIL-C-22520/2-01 192 MIL-C-22520/5-01 192 Part No. Page Tooling Part Number Index

1307191–3M–LUG–FP–3-07 Tyco Electronics Corporation Americas For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 Asia/Pacific Europe/Middle East/Africa Argentina – Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil – São Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada – Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia – Bogota Phone: +57-1-231-9398 Mexico – Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 United States – Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Australia – Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: (Technical Support) Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India – Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia – Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan – Toyko Phone: +81-44-844-8111 Fax: +81-44-812-3207 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Korea – Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia – Kuala Lumpur Phone: +60-3-78053055 Fax: +60-3-78053066 New Zealand – Auckland Phone: +64-9-634-4580 Philippines – Makati City Phone: +632-848-0171 Fax: +632-867-8661 People’s Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Taiwan – Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Singapore – Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Thailand – Bangkok Phone: +66-2-955-0500 Vietnam and Indochina – Ho Chi Minh City Phone: +84-8 930-5546 Fax: +84-8 930-3443 Austria – Vienna Phone: +43-1 90 5 60-0 Fax: +43-1 90 5 60-1333 Belgium – Kessel-Lo Bulgaria – Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Czech Republic – Kurim Phone: +420-5-41-162-111 Denmark – Glostrup Phone: +45-43-480-452 Egypt – Cairo Phone: +20-2-29 04 281 Fax: +20-2-41 92 334 Estonia – Tartu Phone: +372-5138-274 Fax: +372-7400-779 Finland – Helsinki France – Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 Germany – Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Germany – Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Germany – Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Germany - HTS Division – Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Greece – Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Hungary – Budapest Phone: +36-1-289-1000 Ireland – Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Israel – Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Italy – Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031116 Lithuania – Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 Netherlands – ’s-Hertogenbosch Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway – Nesbru Phone: +47-66-77-8886 Poland – Warsaw Romania – Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia – Moscow Fax: +7-495-926-5505 Russia – St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia – Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa – Port Elizabeth Phone: +2741-503-4500 Fax: +2741-581-0440 Spain – Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Sweden – Upplands Väsby Switzerland – Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey – Istanbul Fax: +90-212-281-8184 Ukraine – Kiev Phone: +380-044-206-2265 Fax: +380-044-206-2264 United Kingdom – Swindon Phone: +44-8706-080-208 Fax: +44-1793-572-109 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-208-420-8341 or 8343 +44-208-420-8081 For Middle East/African Countries Not Shown Phone: +33-1-3420-8866 Fax: +33-1-3420-8300 Global Contacts

Tyco Electronics Corporation Harrisburg, Pennsylvania

1307191 Revised 3-07 3M-LUG-FP

tycoelectronics.com