631HE_V01 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

www.vishay.com Vishay Spectrol Revision: 28-May-2019 1 Document Number: 57100 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Single Turn Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) DESIGN SUPPORT TOOLS AVAILABLE

FEATURES

  • Accurate linearity down to: ± 0.5 %
  • All electrical angles available up to: 360° (no dead band)
  • Long life: over 20M cycles
  • Non contacting technology: Hall effect
  • Model dedicated to all applications in harsh environments
  • Robust tool machined aluminum housing
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, single turn hall effect Output type Wires Market appliance Industrial Dimensions 7/8" (22.2 mm) 33DD3 D 3D Models ELECTRICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Electrical angle 90°, 180°, 270°, 360° Any other angle upon request Linearity ± 1 % ± 0.5 % Supply voltage 5 V DC ± 10 % Other upon request Supply current 10 mA typical 16 mA for PWM output Output signal Analog ratio metric 10 % to 90 % of V supply or PWM 10 % to 90 % duty cycle Other upon request Over voltage protection +20 V DC Reverse voltage protection -10 V DC Load resistance recommended Min. 1 k  for analog output and PWM output Hysteresis < 0.2 % MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 360° continuous Bearing type Sleeve bearing B all bearing upon request Standard IP 50; other on request Weight 20 g ± 2 g ORDERING INFORMATION/DESCRIPTION 631HE 0 A 1 W A 1S22 XXXX BO 10 e1 MODEL FEATURES LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST PACKAGING LEAD FINISH 0:Continuous rotation and antirotation pin 1: Continuous rotation and no antirotation pin A: ± 1 % B: ± 0.5 % 1: 90° 2: 180° 3: 270° 4: 360° 9: Other angles W: Wires Z: Custom A: Analog CW B: Analog CCW C: PWM CW D: PWM CCW Z: Other output 0: 6 mm 1: 6.35 mm 2: 3.175 mm 9: Special P: Plain S: Slotted Z: Other type Box of 10 pieces Shaft length from mounting face 22 mm to 72 mm max. per step of 5 mm SAP PART NUMBERING GUIDELINES 631HE 1 B 9 Z C 0P27 XXXX MODEL MECHANICAL FEATURES LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST

www.vishay.com Vishay Spectrol Revision: 28-May-2019 2 Document Number: 57100 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOUT ANALOG Operating temperature 85 °C 125 °C Diagnostic high level 96 % min. 96 % min. Diagnostic low level 2 % max. 4 % max. VOUT PWM CW Vout (% Vsupply) Vout (% Vsupply) Diag High Level Diag High Level 90 % 90 % 10 % Diag Low Level 10 % Diag Low Level

0 Theta (Position) 0 Theta (Position)

(% Vsupply) 97 % min. 1.5 % max.

0 Time (µs)

T: periodicity T high Duty Cycle = Thigh T

www.vishay.com Vishay Spectrol Revision: 28-May-2019 3 Document Number: 57100 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Nothing stated herein shall be construed as a guarantee of quality or durability DIAGNOSTIC MODES FAILURE Vout ANALOG Rpull-up Vout ANALOG Rpull-down Vout PWM Rpull-up = 1 k Vpull-up = Vsupply = 5 V 1: Broken GND Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 2: Broken Vout Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 3: Broken Vsupply Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Over voltage Vsupply > 7 V Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Under voltage Vsupply < 2.7 V Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation ENVIRONMENTAL SPECIFICATIONS Vibrations 20 g from 10 Hz to 2000 Hz Shocks 3 shocks/axis; 50 g half a sine 11 ms Operating temperature range -45 °C to +125 °C Life 20M of cycles Rotational speed (max.) 120 RPM Immunity to radiated electromagnetic disturbances 200 V/m 150 kHz/1 GHz Immunity to power frequency magnetic field 200 A/m 50 Hz/60 Hz Radiated electromagnetic emissions 30 MHz/1 GHz < 30 dB μV/m Electrostatic discharges Contact discharges: ± 4 kV Air discharges: ± 8 kV MATERIALS Housing Aluminum anodized Shaft Stainless steel Output 3 lead wires BUSHING MOUNT HARDWARE Lockwasher internal tooth Steel nickel plated Panel nut Brass nickel plated Vsupply Vpull-up Rpull-up VoutGND Cut off Sensor Vpull-up can be independent to Vsupply

www.vishay.com Vishay Spectrol Revision: 28-May-2019 4 Document Number: 57100 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in millimeters Dimensions in millimeter Delivered with nut and washer Notes (1) For version slotted shaft (2) For shaft type “1“ Ø 22.2 ± 0.13 1 ± 0.2 (1) 7 MIN. 0.8 ± 0.2 (1) Ø 6.35 -0.036 (2)0 Ø 8 max. Ø 9.52 x 0.79 3/8 - 32 NEF-2A Ø 9.52 ± 0.1 CW OR CCW ACCORDING TO OUTPUT MODE CHOICE Gnd = YELLOW WIREVsupply = GREEN WIRE Vout = RED WIRE VIEWED FROM SHAFT

3 WIRES

LG = 300 mm MARKING Unit identification Manufacturer’s name and complete sap part reference, date code, and wiring correspondence: colors versus connections

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED