627V100_12 BITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 06.12 Designed For Pentium® Power Supply Surface Mount Resistor Networks
Applications
- Designed for P54C, P54C-VR and P54C-VRE Pentium® Processors when used in conjunction with Linear Technology Models LT 1266/1267 or LT 1584/1585 voltage regulator IC’s. Standard Resistance Tolerance, at 25°C ±2% Operating Temperature Range -55°C to +125°C Temperature Coefficient of Resistance ±100ppm/°C Temperature Coefficient of Resistance Tracking 50ppm/°C Voltage Coefficient of Resistance ±100ppm/V Maximum Operating Voltage 25Vdc Insulation Resistance, Minimum 10,000 Megohms Thermal Shock plus Power Conditioning ΔR 0.70% Short Time Overload ΔR 0.25% Moisture Resistance ΔR 0.50% Mechanical Shock ΔR 0.25% Vibration Shock ΔR 0.25% Low Temperature Operation ΔR 0.25% High Temperature Exposure ΔR 0.50% Load Life, 2,000 Hours (≤33 Ohms = ±0.5 Ohm) ΔR 0.50% Resistance to Solder Heat ΔR 0.25% Dielectric Withstanding Voltage 200V for 1 minute Temperature Exposure, Maximum 215°C for 3 minutes Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range -55°C to +150°C Electrical Environmental Specifications subject to change without notice. Pentium® is a registered trademark of Intel Corporation.
TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 06.12 Lead Material Copper Alloy, 96Sn, 4Ag Lead Configuration Gull Wing Lead Coplanarity ±0.002 in. (0.057mm) Substrate Material Alumina Resistor Material Cermet Body Material Epoxy Mechanical Matching (Voltage Rating) Power Derating Curve Power Dissipation, Watts At 70°C Model Package Per Resistor 627 V100 0.625 0.125 100 15012570-0 Degrees C = 2.174±1% (Sets LTC1266 VFB = 1.150V±1%)V2 = 1.410±0.25% (Sets 3.525V±0.25% for P54C-VRE) = 1.353±0.5% (Sets 3.383V±0.5% for P54C-VR) = 1.320±1% (Sets 3.300V±1% for P54C)
TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 06.12 Outline Dimensions (Inch/mm) Schematic Part Marking .220±.005 5.59±0.13 .395 10.03 Max. .016 0.41 Typ. Typ. .050 1.27 .310 7.87 .008 0.20 Typ. .028 0.71 Max. Typ. .095 2.41Max. .015 0.38 Typ. .008 0.20 Lead # 1 Indicator Note: Maximum allowable mold excursion = 0.006” 14 13 12 11 10 98 12 3456 7 1.15K1 .35K 800 83 142 R1 R2 R3 R4 R5 V1GNDV 2V 3V 4V 5 UK MADE Lead #1 Indicator Part Marking Date Code Manufacturer's Trademark Part Marking: 627V100
TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. © TT electronics plc 06.12 Packaging
Ordering Information
Tape & Reel Conforms to requirements of EIA-481. All units oriented with lead #1 to the left of direction of feed. Tape Width = Pocket = Pitch = 24mm Embossed Plastic, Antistatic 12mm Reel Diameter = Capacity = 13” (330mm) Maximum 2,000 Units Option: Magazines Conforms to EIA and JEDEC standards. All units oriented with lead #1 to the same side. Magazine: Capacity = 50 Units
627 V100 TR4
Model Standard Tape & Reel Packaging: (No code used for Magazines.)) Circuit Type: V100 = Pentium® Resistor Network