6274072-1

5414217-1 TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 34

Technical content

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Product Facts ■ Bayonet lock coupling for quick connect/disconnect ■ Various connectors available in 50 and 75 ohm versions ■ Fully intermateable with comparable BNC UG/U connectors ■ Full range of Hex Crimp and O Crimp Products for common coaxial cables. ■ Low VSWR ■ Single crimp connectors offer one crimping operation for fast application ■ Twist-on connectors require no special tooling for application to the cable ■ Field serviceable (Category A) connectors qualified to MIL-C-39012 ■ Field replaceable (Category C) plugs with captivated center contact ■ Field replaceable plugs can be terminated with industry standard tooling ■ Tarnish resistant Nickel finish available ■ Choice of different dielectrics ■ Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 ■ Certified by Canadian Standards Association File No. LR 7189 Between Series Adapters For BNC Between Series Adapters, see pages 251-260. R R R The Tyco Electronics BNC RF connector family with bayonet locking coupling provides highly reliable, quick connect/disconnect coaxial connections. Exclusive single and O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. Available in both 50 and 75 ohm versions, these con- nectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board con- nectors. In addition to a variety of crimp type termi- nations, connectors are fur- nished in field replaceable and twist-on styles. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connec- tors designed to MIL-C- 39012 specifications. Tyco Electronics can also supply low cost alternatives with an extensive commer- cial type product line. A lower cost consumer series product offers the capability to supply center contacts in strip form and allow for auto- mated center contact crimp technology. All connectors are designed around the mil-specifications, but utilize low-cost materials, offering comparable mechanical and electrical performance. Product Specifications — 108-1275 — BNC Ohm Terminators 108-12020 — BNC O Crimp Connectors 108-12044 — BNC Commercial Hex Crimp 108-12047 — BNC Commercial and Hex Crimp Connectors 108-12074 — BNC Solder Jacks 108-12075 — BNC Connectors (Category A) 108-12078 — BNC Commercial PCB Panel-Mount Jacks 108-12002 — BNC Commercial T Adapter 108-12095 — BNC Commercial 75 Ohm Connectors 108-12096 — BNC Commercial Feed- Thru and Bulkhead Adapters 108-12079 — BNC Commercial 50 Ohm Solder Jacks 108-12103 — BNC Commercial PCB Press Fit Jacks Application Specifications — 114-12001 — BNC Commercial PCB Jack Press Fit Performance Specifications — Page 45 Material Specifications — Page 46 Tooling — Pages 266-268 Military Category— All MIL type O crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging — All MIL Type connectors are packaged individually, all O crimp connectors are bulk packaged and all Hex crimp connectors are individually pack- aged unless otherwise noted. Related Product Data

BNC Connectors (50 ohm/75 ohm) Performance Specifications Single Category B Straight Right-Angle Commercial Commercial Commercial PC Commercial Characteristics Crimp O Crimp Solder Solder O Crimp O Crimp Board Solder (MIL Type) (MIL Type) Clamp Clamp & Hex Crimp & Hex Crimp 50 & 75 Ohms 50 Ohm Jacks50 Ohms 75 Ohms Electrical Impedance, Nom. 50 50 50 50 50 75 50 & 75 50 & 75(Ohms) Working Voltage 500 500 500 500 500 500 500 500(Volts RMS) Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 5000 (Megohms) Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500 1500Voltage (VAC) Corona Level at 70,000 ft. 375 375 375 375 375 375 — 375(Volts, RMS) RF Leakage, Max. — -55 at -55 at -55 at -55 at -55 at ——(dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz Frequency Range 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-4(GHz) 0-2 Mechanical Durability (Cycles) 500 500 500 500 500 500 500 500 Jam Nut Mounting Torque, 25 25 25 — 25 25 25 3/124 25 Environmental Temperature Range, -65 to +85 -65 to +1651 -65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165Operating (C°) -55 to +85 2 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202Thermal Shock Method 1003Method 107 Method 107 Method 107 Method 107 Cond. A Method 107 Method 107 Method 107 Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202Method 1002Resistance Method 106 Method 106 Method 106 Method 106 Type II Method 106 Method 106 Method 106 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101 Product 108-12002 108-12020 — — 108-12044 108-12095 108-12078 108-12079Specification 108-12047 1Assembled to cable with polytetrafluorethylene dielectric. 2Assembled to cable with polyethylene dielectric. 3For Metal Threads 4For Polyester Threads Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued) Single Category Straight Right-Angle Commercial Commercial Commercial CommercialConnector Crimp B & C Solder Solder O Crimp PCB PCB SolderComponent (MIL Type) O Crimp Clamp Clamp Hex Crimp & Solder Press Fit Ohm Jacks Adapters (MIL Type) Terminators Connector Material Collar Brass Brass Brass Brass Brass QQ-B-626 —— — Brass QQ-B-626 QQ-B-626 Zinc QQ-Z-363 QQ-B-626 Brass Brass Outer Contact QQ-B-626 Phos. Bronze Brass Brass Brass —— — QQ-B-626 (Plug) Beryl. Copper QQ-B-750 MIL-C-21768 Beryl. Copper QQ-C-530 QQ-C-530 Zinc Shell Brass Brass Brass — Zinc Zinc Zinc QQ-Z-363 Brass (Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 Brass QQ-B-626 QQ-B-626 TEFLON Polyethylene TEFLON TEFLON Dielectric MIL-P-19468 TEFLON TEFLON TEFLON Polypropylene Polymethylpentene TEFLON MIL-P-19468 MIL-P-19468 Polypropylene MIL-P-19468 Polymethylpentene Gen. Purpose 1 MIL-P-19468 Polyester PBT Polypropylene, Gen. Purpose Gen. Purpose MIL-P-24519 Gen. Purpose Brass Center Contact Brass Brass Brass Brass Brass —— — QQ-B-626 (Plug) QQ-B-626 QQ-B-626 QQ-B-626 Beryl. Copper QQ-C-530 Beryl. Copper Beryl. Copper Phos. Bronze Phos. Bronze (Jack) QQ-C-530 QQ-C-530 QQ-C-530 QQ-B-750 QQ-C-530 Beryl. Copper Beryl. Copper QQ-C-530 QQ-C-530 Gasket Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber —— — Silicon Rubber QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765 Ferrule Copper Copper —— Copper —— ——QQ-C-576 QQ-C-576 QQ-C-576 Connector Primary Finishes2 Silver Silver Silver Collar QQ-S-365 QQ-S-365 Silver/ Silver/ Bright Nickel —— — QQ-S-365 Bright Nickel Bright Nickel Bright Nickel Bright Nickel QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Silver Bright or Silver Outer Contacts QQ-S-365 QQ-S-365 Silver/ Silver/ Matte Nickel Bright Nickel Bright Nickel Bright Nickel QQ-S-365 (Plug & Jack) Gold Bright Nickel Bright Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 Tin Lead Tin Lead Tin Lead Silver Center Contacts MIL-G-45204 Gold Gold Gold ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365 (Plug & Jack) Silver MIL-G-45204 Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204 Silver Ferrule3 QQ-S-365 QQ-S-365 —— Tin Lead —— ——Tin Lead ASTM-B-545 ASTM-B-545 1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519. 2If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3Ferrules with tin-lead finish are used with nickel plated outer contacts. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm L Max. 14.53 [.572] Dia. Max. Plugs, Crimp L Max. Single Crimp 14.53 [.572] Dia. Max. Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.Cable Type Plating Dielectric Style L with or Tool 69710-1 Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 178, 178A, 33.33178B, Single Crimp Silver TEFLON MIL Type 69245-4 — 69471 - 5330876-0 196, 196A 1.312 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-3 — 2-5221128-11.320 O Crimp Nickel Polyethylene Commercial 27.69 220009-5 318450-2 220217-3 1-5227079-6174, 1.090188, 188A, O Crimp Nickel TEFLON MIL Type 30.18 — 1424050-1 220026-1 5225395-7316 1.188 Single Crimp Silver TEFLON MIL Type 33.33 69245-2 — 69422 - 2-5330061-11.312 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-3 — 2-5221128-3 179, 179A, 1.320 179B, 161, O Crimp Nickel Polyethylene Commercial 27.69 — 1424050-1 220217-3 2-5227079-2 187, 187A, 1.090 BELDEN O Crimp Nickel TEFLON MIL Type -30.18 —— 220026-1 5225395-89221 1.188 Single Crimp Silver TEFLON MIL Type 33.33 — 91910-1 69408 - 2-5329446-11.312 RD 316, 188, O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 — 8-5227079-2Double Braid 1.090 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 2-5221128-7BELDEN 1.320 8219 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 6-5227079-73 1.090 BELDEN 9907, 89907 COMM/ O Crimp Nickel Polyethylene Commercial 27.69 220187-1 318452-2 220217-1 6-5227079-84 SCOPE 2104 1.090 O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 58376-1 1-5227079-9BELDEN 1.090 8218 O Crimp Nickel TEFLON MIL Type 30.18 — 91904-1 69669-2 1-5225395-01.188 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3For use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only. 4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only. Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) L Max. 14.53 [.572] Dia. Max. L Max. Single Crimp 14.53 [.572] Dia. Max. Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.Cable Type Plating Dielectric Style L with or Tool 69710-1 Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 5221128-13 1.320 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 5227079-558, 58A, 1.090 58B, 58C O Crimp Nickel TEFLON MIL Type 33.74 269478-1 220189-3 69727 - 5225395-11.328 Single Crimp Silver TEFLON MIL Type 33.33 2— 91904-4 69223-1 2-5329444-11.312 BELDEN Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-0 88240, 1.320 BERK-TEK O Crimp Nickel Polyethylene Commercial 33.33 220187-1 58435-1 1 220217-1 4-5227079-3BTDC-58, 1.312 COMM/ O Crimp Nickel TEFLON MIL Type 33.33 269478-1 220189-3 69727 - 4-5225395-2SCOPE 2135 1.312 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 5227079-6 223, 1.280 55, 55A, O Crimp Nickel TEFLON MIL Type 43.64 269478-1 220189-3 69727 - 5225395-3 55B 1.718 Single Crimp Silver TEFLON MIL Type 33.33 — 91904-3 69424 - 2-5329444-21.312 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-1 1 220217-1 6-5227079-11.090 142, 142A, O Crimp Nickel TEFLON MIL Type 30.18 269478-1 220189-3 69727 - 5225395-6142B, 400 1.188 Single Crimp Silver TEFLON MIL Type 33.33 269331-1 — 69429-1 2-5330358-21.312 Consult Tyco Electronics for recommended crimp tooling. 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3Bulk packaged. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.Cable Type Plating Dielectric Style L with or Tool 69710-1 Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-11.320 O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-1 1 220217-2 5227079-7124, 140, 210, 1.090 62, 62A, 62B, O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-1 1 220217-2 1-5227079-159, 59A, 59B, 1.090BELDEN 9291, O Crimp Nickel TEFLON MIL Type 30.18 — 58537-1 — 5225395-29209, 9269 1.188 Single Crimp Silver TEFLON MIL Type 33.33 69141-1 — — 2-5329445-11.312 302, BELDEN 88241, 89269, Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-1 Hi-Temp 62A, 1.320 Times PL62, BERK-TEK, BTDC-59, O Crimp Nickel TEFLON MIL Type 34.14 69477-1 58537-1 69669-1 4-5225395-1 BTDC-62 1.344 Hi-Temp 59, Times PL59, O Crimp Nickel Polyethylene Commercial 33.33 — 58537-1 — 5-5227079-3 PLF59 (20 AWG C.C.) 1.312 BELDEN 9104, 9240, Hex Crimp Nickel Polyethylene Commercial 33.53 — 58436-12 — 1-5221128-7 9112, 9167, 1.320 9259, 9266, Times O Crimp Nickel TEFLON MIL Type 30.94 — 258537-1 69669-1 2-5225395-0 FM-59 1.218 BELDEN 8281, 9141, 9231, Single Crimp Silver Polypropylene MIL Type 41.50 69652- — 220000-1 5330878Western Electric 1.634 724, 728, 3049 8, 8A, O Crimp Silver TEFLON MIL Type 27.31 220015-1 — — 5225886-1213 1.075 11, 11A O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 5225886-41.875 BELDEN 9914, O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 5225886-7Times FM-8 1.875 Alpha 9847, O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 225886-5/H12135BELDEN 8213, 9292 1.875 9, 9A, 9B, O Crimp Silver TEFLON MIL Type 52.38 220015-1 — — 5225886-1214 2.062 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1 L Max. 14.53 [.572] Dia. Max. L Max. Single Crimp 14.53 [.572] Dia. Max. Hex and O Crimp Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Plugs, Crimp L Max. 14.53 [.572] Dia. Max. 26.57 [1.046] L Max. 14.53 [.572] Dia. Max. 26.57 [1.046] Single Crimp Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 174, 188, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-3 188A, 316 pentene 1.553 Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91910-1 69422 - 5331178-01.750 179, 179A, 39.45179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial 1.553 — 58436-3 — 5413959-4187, 187A, pentene BELDEN 9221 180, 180A, 180B, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-5195, 195A pentene 1.553 BELDEN 9907, 89907, 8219, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-6COMM/SCOPE pentene 1.553 2104, 3104 Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-1pentene 1.553 58, 58A, O Crimp Gold Nickel TEFLON MIL Type 37.29 69478-1 220189-3 69727-1 5225974-158B, 58C 1.468 Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91904-1 69223-1 5331175-01.750 O Crimp Gold Nickel TEFLON MIL Type 37.29 69478-1 220189-3 69727-1 5225974-255, 55A, 1.468 55B, 223 Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91904-3 69429-1 5331182-01.750 142, 142A, Single Crimp Gold Silver TEFLON MIL Type 44.45 69331-1 — 69429-1 5331182-0142B, 400 1.750 124, 140, 210, 62, 62A, 62B, 37.2959, 59A, 59B, O Crimp Gold Nickel TEFLON MIL Type 1.468 — 58537-1 69669-1 5225974-5 BELDEN 9291, 9209, 9269 38.10 [1.500]14.53 [.572] Dia. Max. Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs are not recommended for applications where the cable frequently moves or flexes. Mating Twist-On Jack— Page 52 RG/U Contact Body Dielectric Style Part No.Cable Plating Plating 59, 59A, Gold Nickel Polymethyl- Commercial 5414265-359B pentene Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm (Continued) L Max. 11.1 [.437] Dia. Max. 11.08 [.436] Dia. Max. L Max. Single Crimp Hex and O CrimpJacks, Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Gold Nickel Polymethyl- Commercial 33.02 — 58436-3 — 5413779-3pentene 1.300 O Crimp Gold Nickel Polypro- Commercial 30.48 — 1424050-1 220217-3 5228979-7174, 188, pylene 1.200 188A, 316 O Crimp Gold Nickel TEFLON MIL Type -30.48 — 1424050-1 220026-1 5225396-71.200 Single Crimp Gold Silver TEFLON MIL Type 33.33 —— 69422- 2-5330062-11.312 179, 179A, 179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial -33.02 — 58436-3 — 2-5413779-4187, 187A, pentene 1.300 BELDEN 9221 O Crimp Gold Nickel Polypro- Commercial 30.48 220187-1 58435-1 1 220217-1 5228979-558, 58A, pylene 1.200 58B, 58C O Crimp Gold Nickel TEFLON MIL Type 30.48 2— 91901-1 69727 - 5225396-111.200 223, 55, Single Crimp Gold Silver TEFLON MIL Type 33.33 69140-2 91904-3 69424 - 2-5329452-255A, 55B 1.312 124, 140, 210, O Crimp Gold Nickel Polypro- Commercial 30.48 220187-2 58435-1 1 220217-2 5228979-662, 62A, 62B, pylene 1.20059, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel TEFLON MIL Type 30.48 — 58537-1 269669-1 5225396-29209, 9269 1.200 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes. Mating Twist-On Plug— Page 50 RG/U Center Body Dielectric Style Part No.Cable Contact Plating 59, 59A, 59B Gold Nickel Acetal Commercial 222428-1 40.14 [1.580] Max. Panel Jacks, Crimp 28.96 [1.140] Max. 2.77 [.109] 12.7 ±0.1 [.500 ±.004] 12.7 ±0.1 [.500 ±.004] Recommended Panel Cutout Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 174, 188, 188A, 316 O Crimp Gold Nickel TEFLON MIL Type — 1424050-1 220026-1 5225397-7 58, 58A, 58B, 58C O Crimp Gold Nickel TEFLON MIL Type -69478-1 91901-1 69727 - 5225397-1 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel TEFLON MIL Type -69477-1 258537-1 269669-1 5225397-2 9209, 9269, 89269 Dia. 11.2 [.441] Dia. 17.84 [.702] Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp Note: Panel Insulating Bushings — Page 54 H L Max. H L Max. 11.04 [.435] Min. 12.82 [.505] Dia. Min. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Recommended Panel Cutouts Maximum Panel Thickness 3.18 [.125] Single Crimp Hex and O Crimp H = 11/16" across flats, 20.32 [.800] Max. across points Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 — 58436-3 — 5413771-3pentene 1.450 O Crimp Gold Nickel Polypro- Commercial 34.93 —— 220217-3 5228980-7174, 188, pylene 1.375 188A, 316 O Crimp Gold Nickel TEFLON MIL Type 35.71 —— 220026-1 5225398-71.406 Single Crimp Gold Silver TEFLON MIL Type 32.13 —— 69422- 2-5330063-11.265 179, 179A, O Crimp Gold Nickel TEFLON MIL Type 35.71 — 1424050-1 220026-1 5225398-8179B, 161, 1.406 187, 187A, Single Crimp Gold Silver TEFLON MIL Type 32.13 — 91910-1 69408 - 2-5329458-1BELDEN 9221 1.265 Times RD316 O Crimp Gold Nickel TEFLON MIL Type 35.71 — 91904-1 69669-2 1-5225398-51.406 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Panel Insulating Bushings for Bulkhead Jacks Material — Nylon Note: Can not be used with single crimp bulkhead jacks. Part No. 330620 (2 Required) 14.73±0.13 [.580±.005] Dia. 14.1±0.08 [.555±.003] 13.95 [.549] Dia. 14.58 [.574] 5.46 [.215] 0.89 [.035] 0.81 [.032] 12.93 [.509] Dia. 17.45 [.687] Dia. Recommended Panel Cutout Dia. BNC Connectors, 50 Ohm (Continued) H L Max. Bulkhead Jacks, Crimp (Continued) Note: Panel Insulating Bushings — at the bottom of this page Single Crimp Hex and O Crimp Interchangeable Dies CERTI-CRIMP for PRO-CRIMPER Interchangeable RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Cable Type Contact Plating Dielectric Style L with or Tool 69710-1 Part No. Plating Integral Die PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 58, 58A, 58B, 58C, BELDEN 88240, Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 — 58436-1 — 5413771-1BERK-TEK pentene 1.450 BTDC-58, COMM/SCOPE 2135 O Crimp Gold Nickel Polypro- Commercial 34.93 220187-1 58435-1 1 220217-1 5228980-5pylene 1.375 58, 58A, O Crimp Gold Nickel TEFLON MIL Type 41.28 — 91901-1 69727 - 5225398-158B, 58C 1.625 Single Crimp Gold Silver TEFLON MIL Type 32.13 — 91904-4 69223-1 2-5329456-11.265 223, O Crimp Gold Nickel TEFLON MIL Type 35.71 — 91901-1 69727 - 5225398-355, 55A, 55B 1.406 142, 142A, O Crimp Gold Nickel TEFLON MIL Type 35.71 — 91901-1 69727 - 5225398-6142B, 400 1.406 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polypro- Commercial 34.93 220187-2 58435-1 1 220217-2 5228980-6 BELDEN 9291, pylene 1.375 9209, 9269 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. H L Max. 11.04 [.435] Min. 12.82 [.505] Dia. Min. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Recommended Panel Cutouts Maximum Panel Thickness 3.18 [.125] H = 11/16" across flats, 20.32 [.800] Max. across points Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

BNC Connectors, 50 Ohm (Continued) W Dia. Max. L Max. 3/8" - 32 Thread Accepts 1.5 [.059] Dia. Max. Wire Bulkhead Solder Jacks, Front Mount Body Plating — Nickel Without Solder Terminal W Dia. Max. L Max. 3/8" - 32 Thread Accepts 1.5 [.059] Dia. Max. Wire 22.23 [.875] With Solder Terminal Recommended Panel Cutout .396/4.04 [.156/.159] 9.65/9.75 [.380/.384] Dia. Dimensions Panel Insulating Part No.Contact Dielectric LW Thickness Bushing Without Solder With SolderMaterial Terminal* Terminal 33.33 13.09 1.17-6.35 227223-1 or — 5227169-7 VALOX 1.312 .515 .046-.250 221951-1 26.93 13.09 1.17-3.18 227223-1 or 5227754-2 5227755-2 Gold 1.060 .515 .046-.125 221951-1 33.33 13.09 1.17-6.35 227223-1 or 5227169-4 5227169-8 TEFLON 1.312 .515 .046-.250 221951-1 33.33 13.09 1.17-6.35 227223-1 or — 5227169-5 Tin VALOX 1.312 .515 .046-.250 221951-1 Includes lockwasher and jam nut. **Includes solder terminal and jam nut. Plugs, for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold 14.53 [.572] Dia. Max. L Max. Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lo r PRO-CRIMPER Adapter 679304-1 3D-2V Hex Crimp Polyethylene 33.53 58436-1 3-5221128-11.320 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company.

1.78 [.070] 0.81 [.032] 12.7 [.500] Dia. 3.94 [.155] 11.94 [.470] 11.43 [.450] 9.53 [.375] Part No. 221951-1Part No. 227223-1 12.83 ±0.08 [.505 ±.003] Dia. 12.07±0.08 [.475 ±.003] 11.56 ±0.08 [.455 ±.003] Dia. 10.97 ±0.06 [.432 ±.003] 0.94 [.030] Max. Dia. 15.88 [.625] Dia. 9.53 [.375] Dia. 10.93 [.430] Dia. 4.04 [.159] Max.1.09 [.043] Max. 14.86 [.585] Dia. Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) 12.83 [.505] Max. 3/8" - 24 Thread 26.80 [1.055] Max. Isolated Bulkhead Solder Jacks, Front Mount Plating Body — Nickel Dielectric — White VALOX Panel Thickness 1.17-6.35 [.046-.250] Recommended Panel Cutout 31.75 [1.250] 13.09 Dia. [.515] Max. 3/8" - 24 Thread Accepts 1.5 [.059] DIa. Max. Wire Panel Thickness 1.17-3.18 [.046-.125] Recommended Panel CutoutPart No. 5414194-1 Plating Body — Nickel Center Contact — Silver Dielectric — Black VALOX Flange & Thread Material — Black VALOX Center Flange & PartContact Thread No.Plating Material TinV ALOX 5227726-1 Silver VALOX 5227726-2 Gold VALOX 5227726-3 Max. 9.91 [.390 ] +0.13 -0.20 +.005 -.000 Dia. 3.89 [.153 ] +0.08 -0.00 +.003 -.000 9.60 [.378 ] +0.08 -0.00 +.003 -.000 Dia. 3.94 [.155 ] +0.08 -0.00 +.003 -.000 Sealed Bulkhead Solder Jack, Rear Mount Part No. 5227426-1 17.78 Dia. [.700] Max. 31.75 [1.250] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 1/2" - 28 Thread Rubber Gasket Accepts . 1.5 [.059] DIa. Max. Wire 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Max. Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene This connector is designed to prevent moisture from entering the interface from the rear of the connector. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) CLCL Recommended PC Board Layouts Without Mounting Posts With Mounting Posts (Top View) Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 ±0.05 [.200 ±.002] 2.01 ±0.05 [.079 ±.002] (2 Holes) Mating Face Right-Angle Jacks PC Board/Panel Mount Body — Nickel Dielectric — Polymethylpentene A B 34.93 [1.375] C Mtg. Hgt. 1/2-28 Thread 1/2-28 Thread VALOX Body A B 34.93 [1.375] Metal Body C Mtg. Hgt. (Top View) 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 5.08 ±0.05 [.200 ±.002] Mating Face Body Center Dimensions Part No. Contact Without With L With LMaterial Plating ABC Mounting Posts Mounting Posts Compliant Posts Gold1 8.26 20.83 15.88 5227676-1 5227677-1 3.48 —— Metal .325 .820 .625 .137 Housing .272 .835 .519 .110 Plating: Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Mounting Post Style Compliant Post L E 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.08 -0.00 +.003 -.000 L Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Jacks PC Board/Panel Mount Plating Body — Nickel Dielectric — Polymethylpentene 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.200 ±.002] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 2.54 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] GS 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] 2.01 ±0.08 [.079 ±.003] (2 Holes) GS (Top View) (Top View) L B 1/2-28 Thread 34.93 [1.375] Mtg. Hgt. 15.88 [.625] L B 1/2-28 Thread 34.93 [1.375] Mtg. Hgt. 15.88 [.625] * Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2. Screw for thickness of less than 2.38 [.093] Part No. 221108-4. Without Mounting Posts With Mounting Posts 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] VALOX Body Metal Body Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 Part No. Body Center Dim. Dim. Without WithMaterial Contact BL Mounting MountingPlating Posts Posts Tin 21.21 3.48 5226993-1 5227222-1VALOX, .835 .137 White Gold 21.21 3.48 5226993-3 5227222-3.835 .137 Tin 21.21 3.48 5226993-2 5227222-2VALOX, .835 .137 Black Gold 21.21 3.48 5226993-6 5227222-6.835 .137 Tin 20.83 3.48 — 5227671-1 Metal .820 .137 Gold 20.83 3.48 — 5227673-1.820 .137 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Recommended PC Board Layouts Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.08 -0.00 +.003 -.000 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) CL 8.59 [.338] 34.93 [1.375] 21.21 [.835] 15.88 [.625] Mounting Height 1/2-28 Thread Jacks with Mounting Flanges PC Board/Panel Mount (Top View) 2.54 [.100]SG 11.43 [.450] 22.86 ±0.08 [.900 ±.003] 0.89 ±0.08 [.035 ±.003] 8.89 [.350] 3.3 [.130] Dia. Clearance Hole for 5-40 Screw Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 Mating Face Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Body Center Contact Part No.Material Plating VALOX, Tin 5226978-1 White Gold 5226978-3 Recommended PC Board Layout 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.08 -0.00 +.003 -.000 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks PC Board Mount 17.45 [.687] 15.88 [.625] Drill Holes for Dia. Pin (5 Places) 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 3.73 [.147] 4.32 [.170] 1.07 ±0.05 [.042 ±.002] Dia. 1.73 ±0.05 [.255] 7.47 [.294] Style D Style A Style C 6.88 ±0.05 [.271 ±.003] 3.43 ±0.05 [.135 ±.002] 6.88 ±0.05 [.271 ±.003] 1.32 ±0.08 [.052 ±.003] Dia. 2.44 ±0.08 [.096 ±.003] (4 Holes) Dia. 15.88 [.625]16.64 [.655] Body Center Leg Plating Contact Plating Dielectric Style Length L Part No. Silver VALOX A 6.35 5227699-1.250 Gold VALOX A 6.35 5227699-2.250 TinV ALOX A 6.35 5227699-3 Nickel .250 Gold VALOX A 3.81 5414460-11 .150 Silver VALOX C 4.45 5222420-1.175 Gold VALOX E 6.35 5415189-1.250 Gold TEFLON B 3.30 5413969-2.130 Tin-Lead Silver VALOX C 3.18 5414305-1.125 Gold VALOX D 3.43 5221123-2.135 1With .76 [.030] standoffs on top of legs.Style B L L Drill Hole to Receive 0.94/H115500.06 [.037±.002] Dia. Pin,

5 Required

12.70 /H115500.08 [.500 ±.003] 12.70 /H115500.08 [.500 ±.003] 6.35 ±0.06 [.250 ±.002] Style E (Panel Mount) L 20.57 [.810] L 6.88 ±0.08 [.271 ±.003] 3.43 ±0.08 [.135 ±.003] 1.02 ±0.08 [.040 ±.003] Dia. 1.50 ±0.08 [.059 ±.003] (4 Holes) Dia. 3.44 ±0.08 [.135 ±.003] 6.88 ±0.08 [.271 ±.003] Recommended PC Board Layouts L 20.78 /H115500.38 [.818 /H11006.015] Sq. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Press Fit Vertical Metalized Jack, PC Board Mount Insulating Bushing Material — Polypropylene Part No. 222163-1 Only to be used on Part Nos. 5222006-1 & 5222462-1 Part No. 5222006-1 14.61 [.575]1.02 ±0.08 [.040 ±.003] Dia. 6.88 ±0.05 [.271 ±.002] 3.43 ±0.05 [.135 ±.002] 6.88 ±0.05 [.271 ±.002] 20.57 [.810] Max. 11.94 Dia. [.470] Max. Recommended PC Board Layout PC Board Thickness Not Less Than 0.99 [.093] Dia. 11.94 [.470] Dia. 2.96 [.115] Max. 6.61 [.260] Max. 1.5 [.059 ] Dia.

4 Holes

+0.08 -0.10 +.003 -.004 Vertical Metalized Jacks, PC Board Mount 24.00 [.945] 10.72 ± 0.25 [.422 ± .010] 10.70 ± 0.08 [.421 ± .003] 7.50 ± 0.08 [.295 ± .003] 1.00 ± 0.08 [.039 ± .003] 2 Plcs. 1.50 ± 0.08 [.059 ± .003] 2 Plcs. 3.00 ± 0.10 [.118 ± .004] 1.70 ± 0.10 [.067 ± .004] 2.50 ± 0.08 [.098 ± .003] 4 Plcs. Signal Contact Hole Switching Contact HolePart No. 1274314-1 (Switching) 24.00 [.945] 10.72 ± 0.25 [.422 ± .010] Part No. 1274315-1 Recommended PC Board Layout 10.70 ± 0.08 [.421 ± .003] 3.75 ± 0.08 [.148 ± .003] 1.00 ± 0.08 [.039 ± .003] 1.50 ± 0.08 [.059 ± .003] 2 Plcs. 3.00 ± 0.10 [.118 ± .004] 1.70 ± 0.10 [.098 ± .003] 3 Plcs. Recommended PC Board Layout Body Contact Dielectric Part Plating Plating No. Tin Silver Polyphenylene 6274314-1 Tin Silver Polyphenylene 6274315-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Recommended PC Board Layout 6.6 ± 0.08 [.260 ± .003] 6.6 ± 0.08 [.260 ± .003] 3.3 ± 0.08 [.130 ± .003] 1.17 ± 0.08 [.046 ± .003] 2.11 ± 0.08 [.083 ± .003] Dia. (4 holes) Maximum PC Board Thickness 2.54 [.100] Dia.CL 6.15 [.242] 10.97 [.432] Mounting Height 27.64 ± 0.51 [1.088 ± .020] Right-Angle Metalized Jacks, PC Board Mount Body Dielectric Center Part Plating Contact Length No. Nickel Polymethyl- 4.34 5413631-1*pentene .171 Tin TEFLON 4.34 5413631-2*.171 Nickel Polymethyl- 3.33 5413631-3*pentene .131 Body Dielectric Contact Part No. Nickel TPX Gold 5414373-1 Recommended PC Board Layouts 1.19 ±0.18 [.047 ±.007] Dia. 7.62 ±0.08 [.300 ±.003] 1.78 ±0.08 [.070 ±.003] Dia.

2 Holes

7.62 ±0.08 [.300 ±.003] 3.81 ±0.08 [.150 ±.003] 8.64 [.340] 21.85 [.860] 25.40 [1 .000] Right-Angle Metalized Jacks, PC Board/Panel Mount Body Part Plating Dielectric No. Tin TEFLON 5415025-2 Tin TPX 5415025-1 Lockwasher and Jam Nut see page 59. 6.6 ± 0.08 [.260 ± .003] 6.6 ± 0.08 [.260 ± .003] 3.3 ± 0.08 [.130 ± .003] 1.17 ± 0.08 [.046 ± .003] 2.11 ± 0.08 [.083 ± .003] 4 holes Dia. Dia. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.64 [.222 ] +0.08 -0.00 +.003 -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 1/2-28 Thread 27.64 ± 0.51 [1.088 ±.020] 10.97 ± 0.18 [.432 ±.007] 6.15 ± 0.25 [.242 ±.010] 11.66 [.459] 4.34 [.171] Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Tee Adapter Covers Material — Polypropylene, general purpose F 5.08 [.200]15.11 [.595] 114.55 ±0 .76 [4.510 ± .030] Color Black Ivory Part No. 221586-1 221586-3 D E Tee Adapters Style A (Jack-Plug-Jack) Style B With Insulated Cover (Jack-Plug-Jack) Insulation Material Polyphenylene oxide Style C (Jack-Jack-Jack) E D F E D Body Center Contact Dimensions Comparable Packaging Style Material Material Dielectric UG/U No. Part No. and Plating and Plating DE F Connector Per Pkg. Brass, BE CU, Gold 32.54 26.19 14.27 Bulk Nickel (30) 2 TEFLON 1.281 1.031 .562 274A (100) 221543-2 PH BR, Gold 33.02 27.31 14.50 Bulk (15)2 Acetal 1.300 1.075 .571 — (100) 5413592-2 A BE CU, Gold 33.02 27.31 14.50 Bulk Zinc, (30)2 Acetal 1.300 1.075 .571 — (100) 5413592-6 Nickel PH BR, Gold 33.02 27.31 14.50 Individual (15)2 Acetal 1.300 1.075 .571 — (1) 3 5413592-9 BE CU, Silver 33.02 27.31 14.50 Individual (200)2 Acetal 1.300 1.075 .571 — (1) 1-5413592-1 B Zinc, BE CU, Gold Acetal 32.54 31.12 17.15 1 Bulk Nickel (30) 2 1.281 1.225 .675 — (100) 5413366-21 Brass, BE CU, Silver 32.54 23.37 Bulk C Nickel (200) 2 TEFLON 1.281 .920 —— (100) 221988-1 Zinc, PH BR, Gold 32.54 23.62 Bulk Nickel (50) 2 Acetal 1.281 .930 —— (100) 5414311-1 1Gray insulation cover 2(Microinches min thickness) 3(Special graphics) Dia. Dia. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) 35.81 [1.410] 32.54 [1.281] Right-Angle Adapters (Jack-Plug) 26.97 [1.062] Bulkhead Jack-Jack Adapters L Max. H Max. Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. 36.07 [1.420]15.87 [.625] 22.89 [.901] Max.

14.53 Dia

[.572] Max. Isolated Bulkhead Jack-Jack Adapter Body Center Contact Dielectric Part No.Plating Plating Nickel Gold Polymethylpentene 5414105-1 Body Center DimensionsContact Dielectric Part No.Plating Plating HL Nickel Silver 17.45 38.10 TEFLON 330024-.687 1.500 Nickel Gold1 17.78 36.07 Poly- 5228226-1.700 1.420 ethylene Nickel Gold2 17.78 36.07 Poly- 5228226-3.700 1.420 ethylene Plating: Gold1 — 0.00127 [.000050] thick Gold2 — 0.00076 [.000015] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Body Center Contact Dielectric Part No.Plating Plating Nickel Silver TEFLON 5329517-1 Nickel Gold TEFLON 5222165-2 Nickel Gold Polymethylpentene 5414666-1 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.06 -0.00 +.003 -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. Dia.5.54 [.218 ] +0.06 -0.00 +.003 -.000 Jack-Jack Adapters Style A Body Center Contact Dielectric Style Part No.Plating Plating Nickel Silver TEFLON A 221551-1 Nickel Gold TEFLON A 221551-3 Nickel Gold Polymethyl- B 5414414-1pentene Style B Plug-Plug Adapter 31.8 [1.252] Ref. Contact Body Part No.Plating Plating Gold Nickel 415796-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jack Covers 101.6 [4.000] #6 Stud Size 22.10 [.870] 14.53 Dia. [.572] Max. Body Plating Part No. Silver 330022 Nickel 1-330022-2 Max. 14.53 Dia. [.572] Max. 33.02 [1.300] #6 Stud Size Tether Terminator Plugs 50, 75, 93 Ohm Plating Body — Nickel Center Contact — Gold Dielectric — Polyethylene Insulated Terminators Insulation Material Polyphenylene oxide Long Cover Short Cover* 38.10 [1.500] 17.40 [.685] 17.40 [.685] Register Color Cover Part Specification Style No. Gray Long 5413557-1

1 Watt, 50 Ohm Short 5413364-2

• The Short Cover is required when mating the Terminator with a Tee Adapter. Resistor Part No. Specification With Tether Without Tether

1 Watt, 50 Ohm 5221629-11 5221629-4

1 Watt, 75 Ohm 5221629-21 5221629-5

1 Watt, 93 Ohm — 5221629-6

0.5 Watt, 75 Ohm — —

1 Watt, 50 Ohm 1-5221629-61 —

1 Tether is conductive with #4 stud size

Max. 38.10 [1.500] Max. Shorting Caps Plating Body — Nickel Center Contact — Gold Part No. 413453-1 15.24 [.600] 14.53 [.572] Dia. Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm Plugs, Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling listed below is different from the equivalent 50 ohm connectors. Plugs Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-8179B, 187, 1.160 187A, 161, O Crimp Gold Nickel Polyethelene Commercial 35.56 318451-2 — 5221185-8BELDEN 9221 1.140 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 1-5413589-0 AT&T 735A 1.160 O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 1-5221185-81.090 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-3 BELDEN 8218 1.160 O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 5221185-31.090 140, 210, 62, 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-262B, 59, 59A, 59B, 1.160 BELDEN 9291, O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 58248-2 5221185-29209, 9269 1.090 302, BELDEN 89269, 88241, Hi-Temp 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-1Times PL-62, Berk Tek 1.160 BTDC-59, BTDC-62 BELDEN 8212, 9104, 29.46 9112, 9167, 9240, 9259, Hex Crimp Gold Nickel Polyethelene Commercial 1.160 58425-1 — 5413589-9 9266, Times FM-59, (RG 59 Type 27.69 with 20 AWG C.C.) O Crimp Gold Nickel Polyethelene Commercial 1.090 58536-1 58248-2 5221185-9 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-7BELDEN 9145, 1.160 AT&T 734A O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 — 1-5221185-01.090 BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 25.65 58536-1 — 5221185-19114 1.010 6, 6A O Crimp Gold Nickel Polyethelene Commercial 37.85 58538-1 58248-1 5221185-71.490 BELDEN 8281, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-3 — 5413589-59141, 9231, 1.160Western Electric 724, O Crimp Gold Nickel Polyethelene Commercial 28.45 58538-1 58248-1 5221185-5728, 3049 1.120 COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 2-5221185-9S59 Hec 1.140 COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 3-5221185-1F59 Hec-z 1.140 L Max. 14.53 [.572] Dia. Max. Hex and O Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Plugs for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold Bulkhead Jacks for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene 14.53 [.572] Dia. Max. L Max. Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lo r PRO-CRIMPER Adapter 679304-1 3C-2V Hex Crimp Polymethylpentene 29.46 58425-1 1-5413589-11.160 2.5C-2V Hex Crimp Polymethylpentene 29.46 58425-2 1-5413589-61.160 Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lo r PRO-CRIMPER Adapter 679304-1 1.5C-2V Hex Crimp 75 Ω 36.83 58425-2 5413590-4*1.450 *Packaged in 100 pieces per bag. 20.32 [.800] Max. L Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 14.53 Dia. [.572] Max. L Max. 27.18 [1.070] Hex and O Crimp Max. Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, 179B, 187, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — -5413588-8187A, 161 pentene 1.553 BELDEN 9221 AT&T 735A Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 1-5413588-0pentene 1.553 AT&T KS 19224 L2, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 5413588-4RD179 pentene 1.553 Double Braid 140, 210, 62, Hex Crimp Gold Nickel Polymethyl- Commercial 139.45 58425-1 — 5413588-262A, 62B, 59, pentene 1.553 59A, 59B, BELDEN 9291, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 58248-2 -5221402-29209, 9269 pentene 1.570 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-1 — 5413588-9Times FM-59, pentene 1.553 (RG 59 Type with 20 AWG C.C.) BELDEN 9145, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 — 5221402-4AT&T 734A pentene 1.570 Right-Angle Plugs, Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-8179B, 161, 1.300 187, 187A, O Crimp Gold Nickel Polyethelene Commercial 30.48 318451-2 — 5221199-5BELDEN 9221 1.200 BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-31.300 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 58248-2 5221199-2 BELDEN 9291, 1.200 9209, 9269 302, BELDEN 88241, 89269, Hi-Temp 62A, Times Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-1PL-62, Berk 1.300 Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-9Times FM-59, 1.300 (RG 59 Type with 20 AWG C.C.) BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 — 5221199-19114 1.200 Jacks, Crimp L Max. Hex and O Crimp 11.08 Dia. [.436] Max. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 20.32 [.800] Max. 34.93 [1.375] Hex and O Crimp Max. 12.83 [.505 ] +0.13 -0.20 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Interchangeable Dies for Interchangeable RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand Contact Dielectric Style Hand Tool Tool 69710-1 Part No.Cable Type Plating Plating L 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-8179B, 161, 1.450 187, 187A, O Crimp Gold Nickel Polyethelene Commercial 34.93 318451-2 — 5221221-5BELDEN 9221 1.375 AT&T KS 19224 L2, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-4RD179 1.450 Double Braid Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-3BELDEN 8218 1.450 140, 210, 62, 62A, 62B, 59, 59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-2 BELDEN 9291, 1.375 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-7Times FM-59 1.375 (RG 59 Type with 20 AWG C.C.) BELDEN 9114, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 — 5221221-19248 1.375 Bulkhead Jacks, Crimp Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Solder Jacks Front Mount Plating Body — Nickel Center Contact — Silver 27.43 [1 .083] 13.09 Dia. [.515] Max. Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout 9.75/9.65 [.384./380] Dia. 4.04/3.96 [.159/.156] Part No. 5221244-1 (with Solder Terminal) Bulkhead Solder Jack Rear Mount Lockwasher and Jam Nut see page 73. Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Bulkhead Jack PC Board Mount Accepts .054 Dia. Max. Wire Part No. 5415187-1 (without Solder Terminal) 3/8-32 Thread Part No. 5414217-1 17.78 Dia. [.700] Max. 31.75 [1 .250] 1/2-28 Thread Accepts . .050 Dia. Max. WIre Max. Max. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 13.09 [.515] Dia. Max. 27.43 [1.083] Max. Accepts .054 Dia. Max. Wire 3/8-32 Thread 20.8 [.820] 11.07 [.436] Max. 3.30 [.130] Ø 12.70 ± 0.1 [.500 ± .004] 11.2 ± 0.1 [.441 ± .004] Part No. 6274086-1 Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Body Center Dimensions Part No. Contact Without WithMaterial Plating ABCL Mounting Posts Mounting Posts VALOX, Black w/ 6.17 21.21 11.68 2.79 * Compliant Posts Gold3 .243 .835 .460 .110 — 5415105-2 (Economy)* VALOX, 6.17 21.21 11.68 4.01 * Black Gold3 .243 .835 .460 .158 — 5415105-1 (Economy)* VALOX, 6.91 21.21 13.88 3.48 * White Gold1 .272 .835 .519 .137 — 5415634-2 (Economy)* **Economy connector uses 50 Ω part with smaller dielectric and stamped and formed con- tact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). Plating: Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. CLCL Recommended PC Board Layouts Right-Angle Jacks PC Board/Panel Mount Outer Shell — Nickel Dielectric — Polymethylpentene Lockwasher and Jam Nut see page 73. A B 34.93 [1.375] C Mtg. Hgt. 1/2-28 Threads 1/2-28 Threads VALOX Body A B 34.93 [1.375] Metal Body C Mtg. Hgt. L * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. Without Mounting Posts With Mounting Posts (Top View) 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 ±0.05 [.200 ±.002] 2.01 ±0.08 [.079 ±.003] (2 Holes) Mating Face (Top View) 10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002] GS 0.89 ±0.08 [.035 ±.003] 5.08 ±0.05 [.200 ±.002] Mating Face 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Jacks PC Board/Panel Mount Plating Outer Shell — Nickel Dielectric — Polymethylpentene VALOX Body Metal Body Recommended PC Board Layout L B 34.93 [1.375] Mtg. Hgt. 15.88 [.625] 1/2-28 Thread L B 34.93 [1.375] Mtg. Hgt. 15.88 [.625] 1/2-28 Thread Body Contact Dim. Dim. Part No.Material Plating B L VALOX, Black Gold1 21.21 3.48 5415632-1 (Economy)* .835 .137 VALOX, White Gold1 21.21 3.48 5415632-2 (Economy)* .835 .137 Metal Gold1 20.83 3.48 5222132-1.820 .137 Metal Tin 21.21 3.48 5415520-1(Economy)* .835 .137 *Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). Plating: Gold1 — 0.00076 [.000030] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Lockwasher and Jam Nut Part No. 1-329632-2 Part No. 1-329631-2 12.83 [.505 ] +0.13 -0.00 +.005 -.000 Dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 [.100 ±.002] 0.89 ±0.08 [.035 ±.003] 2.01 ±0.08 [.079 ±.003] (2 Holes) GS (Top View) 10.16 ±0.08 [.400 ±.003] 10.16 ±0.08 [.400 ±.003] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. VALOX is a trademark of General Electric Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Plating Dielectric — TEFLON A Max. 11.49 [.470] Dia. Max. Recommended PC Board Layout Style A Style B Style C Body Center Leg Contact Style Length Part No.Plating Plating L Nickel Gold B 3.30 6274291-2.130 Tin Gold B 3.30 6274291-1.130 Tin Gold B 6.35 6274359-1.250 Tin Gold C 4.44 5414394-1.175 Nickel Silver A 6.35 5413986-1.250 Tin Gold F 2.54 6274360-1.100 6.88 ±0.05 [.271 ±.002] 6.88 ±0.1 [.271 +.003] –.004 1.5 ±0.1 [.059 +.004] –.0033.43 ±0.05 [.135 ±.002] Recommended PC Board Layout 17.45 [.687] 15.88 [.625] L L Press Fit Vertical Metalized Jacks PC Board Mount Dim. Part A No. 20.57 5222462-1.810 16.26 5414088-1.640 20.57 [.810] L Drill Holes for Dia. Pin (5 Places) 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.08 [.500 ±.003] 6.88 ±0.05 [.271 ±.003] 6.88 ±0.08 [.271 ±.003] 3.43 ±0.05 [.135 ±.002] 3.44 ±0.08 [.135 ±.003] 3.43 ±0.08 [.135 ±.003] 6.88 ±0.05 [.271 ±.003] 6.88 ±0.08 [.271 ±.003] 2.44 ±0.08 [.096 ±.003] (4 Holes) Dia. 1.32 ±0.08 [.052 ±.003] Dia. (4 Plated-Thru Holes) Dia. 1.02 ±0.08 [.040 ±.003] (Plated-Thru Hole) Dia. Insulating Bushing Material — Nylon Part No. 222163-1 Only to be used on Part Nos. 5222462-1 and 5222006-1 16.64 [.655] Sq. 1.50 ±0.08 [.059 ±.003] (4 Holes) Dia. 1.02 ±0.08 [.040 ±.003] Dia. 2.96 [.115] Max. 6.61 [.260] Max. 14.61 [.575] Dia. 11.94 [.470] Dia. 1.02 ± 0.08 [.040 ± .003] 5.16 ± 0.08 [.203 ± .003] 5.16 ± 0.08 [.203 ± .003] 2.578 ± 0.076 [.1015 ± .0030] Dia. 2.06 ± 0.05 [.081 ± .002] Dia. 4 Plcs. 2.54 [.100] 14.73 [.580] 5 Plcs. Style F (Push-On) Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

3.81 ± 0.08 [.047 ± .007] 1.78 ± 0.08 [.070 ± .003] 7.62 ± 0.08 [.300 ± .003] 7.62 ± 0.08 [.300 ± .003] Dia. Dia. 25.40 ± 0.38 [1.000 ± .015] 11.43 ± 0.43 [.450 ± .017] 21.84 [.860] 17.78 [.700] 11.07 [.436] Max. Part No. 6274127-1 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Recommended PC Board Layout 6.6 ± 0.08 [.260 ± .003] 6.6 ± 0.08 [.260 ± .003] 3.3 ± 0.08 [.130 ± .003] 1.17 ± 0.08 [.046 ± .003] 2.11 ± 0.08 [.083 ± .003] Dia. (4 holes) Maximum PC Board Thickness 2.54 [.100] Dia. Press Fit, Bulkhead Vertical Metalized Jack includes hardware 28.78 [1.133] 4.37 ± 0.51 [.172 ± .020] 5 Plcs. 24.41 [.961] 10.80 [.425] + 0.08 – 0.00 + .003 ]– .000 5.54 [.218 + 0.13 – 0.00 + .005 ]– .000 ø 12.83 [ø .505 Part No. 6274124-2 Recommended PC Board Layout CL 6.15 [.242] 10.97 [.432] Mounting Height 28.4 [1.118] Max. 17.48 [.688] Sq. 15.88 [.625] Max. 1.7 ±0.05 [.067 ±.002] (2 Places) For Drive Screw 6.35 ±0.05 [.250 ±.002] 6.35 ±0.05 [.250 ±.002] 12.7 ±0.05 [.500 ±.002] 12.7 ±0.05 [.500 ±.002] 1.02 ±0.08 [.040 ±.003] (Plated-Thru Hole 3 Places) Press Fit Vertical Metalized Jacks PC Board Mount (Continued) PC Board Thickness (Min.) Part No. 2.36 5221336-3.093 3.17 5221336-4.125 Recommended PC Board Layout Body Contact Center Part No. Plating Dielectric Plating Contact Dimension Nickel TPX Gold2 .171 [.007] 5413558-1 Tin TEFLON Gold2 .171 [.007] 5413558-2 Nickel TPX Gold2 .131 [.005] 5413558-3 Nickel TPX Gold1 .171 [.007] 5413558-5 Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Dia. Right-Angle Metalized Jacks PC Board Mount Ø 1.02 ± 0.08 [.040 ± .003] 3.43 [.135] 6.88 [.271] 3.43 [.135] 6.88 [.271] Holes Plated Through 5 Plcs. Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors 36.07 [1.420] Max. Ø 15.88 ± 0.25 [.625 ± .010] BNC Connectors, 75 Ohm (Continued) Right-Angle Metalized Jacks PC Board/Panel Mount Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.64+0.08 -0.00 [.222+.003] -.000 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003] -.000 Part No. 5222117-1 36.07 [1.420]11/16 Right-Angle Adapter (Jack-Plug) Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene 22.89 [.901] Max. 14.53 [.572] 26.97 [1.062] Part No. 5415020-1 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003] -.000Recommended Panel Cutout Dia. Max. Bulkhead Jack-Jack Adapter Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Part No. 1274935-1 Jack-Jack Adapter Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Bulkhead Jack-Jack Adapter Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene Body Plating Dielectric Part No. Tin TEFLON 6274425-2 1/2-28 Thread 27.64 ± 0.51 [1.088 ±.020] 10.97 ± 0.18 [.432 ±.007] 6.15 ± 0.25 [.242 ±.010] 11.66 [.459] 4.34 [.171] 36.04 [1.419] Max. Part No. 415567-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant. TEFLON is a trademark of E.I. Dupont de Nemours and Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 8.89 ± 0.13 [.350 ± .005] + 0.13 – 0.00 + .005 – .000 Ø 9.65 [.380 ] Recommended Panel Cutout Bulkhead Jack-Push On Plug Adapter 41.92 [1.650]Ø 14.35 [.565] Max. Ø 8.43 [.332] Max. Part No. 1274007-1 Note: Part Numbers are RoHS compliant except: /H12135Indicates non-RoHS compliant.