D-101-33 PANDUIT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
SPECIFICATION CONTROL DRAWING THERMOFIT DEVICES TE connectivity
300 Constitution Drive
Menlo Park, CA 94025 USA TITLE: SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIM ETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: D-101-3X TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A ROUGHNESS IN MICRON TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DCR NUMBER: D981004 REPLACES: D1013X DRAWN BY: M. FORONDA DATE: 06/15/98 PROD. REV. SEE TABLE DOC ISSUE: SCALE: None SIZE: A SHEET: 1 of 1 Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: red. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color:gray. 4. GROUND LEAD: Raychem 55A0111-XY in accordance with MIL-W-22759/32 AWG ‘XY’ (see table) stranded tin plated copper. Color: see table. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125 °C minimum, meeting the dimensional criteria listed, having tin or silverplated copper shields. 2. Temperature range: -55 °C to +150 °C. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70. For best results, prepare the cable as shown: * A trademark of TE Connectivity. ‘XY’ = WIRE GAUGE (AWG) Product Revision Product Dimensions Cable Dimensio ns Product Name L max øA min øB min K min AWG øD max øE min J±0.5 (J ±0.02) Color of Item 4 D-101-33 J 22 black D-101-36 J 20 white