61D MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: 61D 61D SPECIFICATIONS ES-6629 Rev.14 Page 1/4 https://www.m-system.co.jp/ Field Network Modules 61-UNIT Series ANALOG I/O MODULE (DeviceNet) Functions & Features

  • Interfacing analog I/O signals from/to Mini-M, Pico-M and other signal conditioner modules with DeviceNet
  • Saving power and I/O wiring inside an instrumentation panel (1.97) 115 (4.53) 100 (3.94) mm (inch) MODEL: 61D-[1][2]-[3][4]

ORDERING INFORMATION

  • Code number: 61D-[1][2]-[3][4] Specify a code from below for each of [1] through [4]. (e.g. 61D-161-K/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] NO. OF CHANNELS 04: 4 points 08: 8 points 16: 16 points [2] I/O TYPE 1: Input 2: Output [3] POWER INPUT AC Power K: 85 – 132 V AC (Operational voltage range 85 – 132 V, 47 – 66 Hz) (CE not available) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) (Specify power suffix code R (24 V DC) when the UNIT is to be combined with the M8BS2.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

  • Installation Base (model: M2BS2)
  • Installation Base (model: M8BS2)
  • Programming Unit (model: PU-2x) GENERAL SPECIFICATIONS Construction: Plug-in Connection DeviceNet: Euro type connector terminal (applicable wire size: 0.2 to 2.5 mm2, stripped length 7 mm) I/O: Via the Installation Base (model: MxBS2) Power input: Via the Installation Base (model: MxBS2) Housing material: Flame-resistant resin (black) Isolation: I/O to DeviceNet to power Power indicator: Green LED turns on with power supplied. DeviceNet COMMUNICATION Transmission cable: Approved for DeviceNet Node address setting: DIP switch; 00 – 63 Baud rate setting: DIP switch MS (Module Status) indicator: Bi-color (green/red) LED indicates device status. NS (Network Status) indicator: Bi-color (green/red) LED indicates status of the communication link. INPUT SPECIFICATIONS ■ Analog Input Input range: 1 – 5 V DC Input resistance: ≥ 1 MΩ (Each input must be isolated by signal conditioners. Non- isolated modules such as M2BW and M8BW are not usable.) A/D conversion Moving averaging: 4 samples Sampling rate: 160 ms A/D conversion output: 16-bit binary Signal range 0 – 100 % is converted into hexadecimal 0000 – 1770 (0 – 6000). -15 to 0 % is represented by 2’s complements. Overall range is represented by hexadecimal FC7C – 1AF4

MODEL: 61D 61D SPECIFICATIONS ES-6629 Rev.14 Page 2/4 https://www.m-system.co.jp/ Note: In the firmware version 3.00 or later, analog input range 0 – 100% can be converted into hexadecimal 0000 – 2710 (0 – 10000). In addition, negative values of analog input range -15 to 0% can be converted into signed absolute values. Refer to the instruction manual for details. OUTPUT SPECIFICATIONS ■ Analog Output Output range: 1 – 5 V DC Load resistance: 20 kΩ minimum (Output must be isolated with signal conditioners. When the transmission line is open, the last value sampled before failure is held. Non-isolated modules such as M2BW and M8BW are not usable. ) D/A conversion output: 16-bit binary Signal range 0 – 100 % is converted into hexadecimal 0000 – 1770 (0 – 6000). -15 to 0 % is represented by 2’s complements. Overall range is represented by hexadecimal FC7C – 1AF4 Note: In the firmware version 3.00 or later, analog output range 0 – 100% can be converted into hexadecimal 0000 – 2710 (0 – 10000). In addition, negative values of analog output range -15 to 0% can be converted into signed absolute values. Refer to the instruction manual for details. INSTALLATION Power consumption

  • AC: Approx. 4 VA
  • DC: Approx. 4 W (160 mA) Supply voltage to network: 11 – 25 V DC supplied through the network terminal block Supply current to network: 60 mA max. @ 24 V Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: MxBS2) Weight: 250 g (0.55 lb) PERFORMANCE in percentage of span A/D conversion: ±0.1 % D/A conversion: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Permissible power failure duration: ≤ 10 msec. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (I/O to DeviceNet to power) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive

MODEL: 61D 61D SPECIFICATIONS ES-6629 Rev.14 Page 3/4 https://www.m-system.co.jp/ EXTERNAL VIEW PWR MS NS NA1 NA0 NA2 NA3 NA4 NA5 DR0 DR1 ON Node Address Setting Baud Rate Setting NS Indicator LED Euro Type Connector Terminal for DeviceNet MS Indicator LED Power LED PU-2x Modular Jack EXTERNAL DIMENSIONS unit: mm [inch] (1.50) (.47) 80 (3.15) 100 (3.94) 2–M3 SCREWS

MODEL: 61D 61D SPECIFICATIONS ES-6629 Rev.14 Page 4/4 https://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM A / D or D / A Conv.I / O CPU DeviceNet Comm. CPU SERIAL TRANSMISSION LINE MODULAR JACK I/O & POWER CONNECTOR DIP SW INDICATOR LEDV+ CAN_H Drain CAN_L To Other DeviceNet Devices To Installation Base PU-2x ■ CABLE IDENTIFICATION The following table defines wire insulation colors and designations. The terminal block is labeled also in the same colors so that the correct assignment can be confirmed. COLOR DESIG. DESCRIPTION black V – Power (–) blue CAN_L Signal Low bare Drain Shield white CAN_H Signal High red V + Power (+) Specifications are subject to change without notice.