6153 BITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345 Website: www.bitechnologies.com 7/8” D iam eter Single Turn N on-contacting Position Sensor M odel 6150 Series 6153 1/8” Shaft, dual ball bearing 615x-XXXX Custom models are available; Contact Customer Service for special features Total Mechanical Travel 360° continuous Number of Gangs 1 maximum Weight 0.4 oz. nominal Shaft Runout maximum T.I.R. 0.003” Pilot Diameter Runout maximum T.I.R. 0.003” Lateral Runout maximum T.I.R. 0.003” Shaft Radial Play maximum 0.005” Start/Run Torque maximum 0.5 oz.-in. Rotational Speed maximum 1,000 RPM M ODEL STYLES AVAILABLE M ECHANICAL 1 Specifications subject to change without notice. 2 Linearity is measured between 1% and 99% of input voltage.
3 Measured with 5 VDC supply and 50% of electrical travel
September 24, 2013 Model 6150 Series page 1 of 3 ELECTRICAL 1 Output Voltage 0.2 Vdc (4%) to 4.8 Vdc (96%) Typical (see Feature Codes table) Output Overvoltage Limits 10 Vdc to -0.3 Vdc; output may be shorted to ground or supply without damage Output Current ±8 mA maximum Output Load 1 k Ω minimum , 10 kΩ typical Input Voltage 4.5 to 5.5 Vdc Supply Voltage Absolute Limits 20 Vdc maximum, -10 Vdc minimum Independent Linearity 2 ±0.5% (0.25% available) Hysteresis 0.2% maximum Resolution 0.088° for 360° travel, 0.011° for 45° travel Supply Current 8.5 mA typical, 12 mA maximum Dielectric Strength 750 V rms Insulation Resistance 1,000 Megohms minimum Electrostatic Discharge (ESD) Passes 2 kV human body model and 15 kV air discharge Bulk Current Injection (BCI) Passes 2-500 MHz at 200 mA Actual Electrical Travel 360° typical (see Ordering Information) Temperature Coefficient of Output Voltage 3 ± 20 ppm/°C RoH S 2 com pliant Pb
BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com September 24, 2013 Model 6150 Series page 2 of 3 Operating Temperature Range -40°C to +125°C Shock Per MIL R-39023, 6 ms Saw-tooth 100 G’s Vibration Per MIL R-39023, 10 G’s, 100 to 500 Hz Moisture Resistance, Powered Per MIL 202G, Method 106G Rotational Life 50 million shaft revolutions with side load < 0.33 lb, 100 million with side load < 0.25 lb Storage Temperature Range -55°C to +125°C Ingress Protection Rating (IP Code) IP50 ENVIRONM ENTAL ORDERING INFORM ATION Model Series Voltage Output Code (see table) Electrical Angle (35 to 360 degrees, smaller angles are possible, consult factory) Optional Feature Code (see table) Linearity, Independent 6153 V1 A360 L.5 XX FEATURE CODES M odel 6150 series Voltage Output Codes V0 ≤ 3% to ≥ 96% V1 4% to 96% V2 5% to 95% V3 10% to 90% V4 15% to 85% V5 20% to 80% Optional Feature Codes FS Flatted Shaft SS Slotted Shaft LT Linearity Data CW Reverse Direction When V0 is used the angle specified is the theoretical angle over which the output would vary if the output could actually reach 0% and 100% of Vcc. When multiple Optional Feature codes are used the P/N shall be in the same sequence as listed in this table (top to bottom).
BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com September 24, 2013 Model 6150 Series page 3 of 3 M odel 6150 Series OUTLINE DRAW ING Model 6153 C ham fer M ax. x 45° .010 ± .005 [ .25 ± .13 ]