6130 BITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

BI Technologies Corporation

4200 Bonita Place

Fullerton, CA 92835 USA Website: www.bitechnologies.com July 25, 2006 page 1 of 3 BI technologies MODEL 6130 SERIESMODEL 6130 SERIESMODEL 6130 SERIESMODEL 6130 SERIES Low Profile 7/8” Diameter Single Turn Conductive Plastic Bronze Bearing Position Sensor Precision Potentiometer MODEL STYLESMODEL STYLESMODEL STYLESMODEL STYLES 6137 1/4” Shaft, 3/8” Bushing 6138 (For heavy side load applications) 1/4” Shaft, 3/8” Bushing Special features and tolerances available on request ELECTRICALELECTRICALELECTRICALELECTRICAL1111 Resistance Range, Ohms 1K to 100K Standard Resistance Tolerance ± 20% Independent Linearity2 ± 1% (2% for values greater than 20K Ohms) Input Voltage, Maximum 400 Vdc, not to exceed power rating Power Rating, Watts 1.0 @ 70°C, derating to 0 @ 125°C Dielectric Strength 750 V rms Insulation Resistance, Minimum 1,000 Megohms Output Smoothness, Maximum 0.1% Actual Electrical Travel, Nominal 340° (300° with stop feature) ± 3° Electrical Continuity Travel, Nominal 350° (343° with stop feature) ± 3° End Voltage, Maximum 0.5% of input voltage Resolution Essentially Infinite 1 Specifications subject to change without notice. 2 Linearity is measured between 1% and 99% of input voltage. RoHS Compliant

BI Technologies Corporation Fullerton, CA 92835 USA Website: www.bitechnologies.com July 25, 2006 page 2 of 3 BI technologies MECHANICALMECHANICALMECHANICALMECHANICAL Total Mechanical Travel 360° Continuous (343° with stop feature) Weight, Nominal .6 oz Backlash, Maximum 1° Static Stop Strength, Maximum 40 in.-oz. Panel Nut Tightening Torque, Maximum 15 in. lb. Start/Run Torque, Maximum 0.5 in. oz. Construction zinc die cast housing, stainless steel shaft, bronze bearing Hazardous Materials Pb free, RoHS compliant ENVIRONMENTAL (MILENVIRONMENTAL (MILENVIRONMENTAL (MILENVIRONMENTAL (MIL----RRRR----39023)39023)39023)39023) Operating Temperature Range -40°C to +125°C Temperature Cycling (Static) 5 cycles, -40°C to +125°C 15% ∆R max. Shock, 6 ms Sawtooth 100G’s 0.1 ms discontinuity max. Vibration, 10G’s, 100 to 500 Hz 5% ∆R max., 0.1 ms discontinuity max. Moisture Resistance, Five 24 hour cycles 25% ∆R max. Rotational Life (6137) 5 million shaft rev. Rotational Life (6138) 10 million shaft rev. ORDERING INFORMATIONORDERING INFORMATIONORDERING INFORMATIONORDERING INFORMATION3333 SPECIAL FEATURE CODESPECIAL FEATURE CODESPECIAL FEATURE CODESPECIAL FEATURE CODESSSS Center Tap CT Stop ST Flatted Shaft (Slotted Shaft is Standard) FS STANDARD RESISTANCE STANDARD RESISTANCE STANDARD RESISTANCE STANDARD RESISTANCE VALUES, OHMSVALUES, OHMSVALUES, OHMSVALUES, OHMS 1K 2K 5K 10K 20K 50K 100K 3 Contact our customer service for custom designs and features. 6137 R10K L16137 R10K L16137 R10K L16137 R10K L1.0 XX.0 XX.0 XX.0 XX Model Series Resistance Value All units are Pb free and RoHS compliant Optional Special Feature Code Linearity

BI Technologies Corporation Fullerton, CA 92835 USA Website: www.bitechnologies.com July 25, 2006 page 3 of 3 BI technologies OUTLINE DRAWINGOUTLINE DRAWINGOUTLINE DRAWINGOUTLINE DRAWING CIRCUIT DIAGRAMCIRCUIT DIAGRAMCIRCUIT DIAGRAMCIRCUIT DIAGRAM