60W010-C02 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FOR PORTABLE ELECTRIC DRILL 60W010-C02 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 RF_35/12.04/3.0 Suitable cables 3/8" helical corrugated cable Flexline 3/8 ” S (recommended) Packing Standard 1 pce in box Weight 410 g/pce Replacement Blades 1 pcs Type PJ-2: 60W010-C05/50 1 pcs Type PJ-4L: 60W010-C02/50 1 pcs Type OC-97-706: 60W010-C01/51 Draft Date Approved Date Rev. Engineering change nu mber Name Date Rong Fang 05/07/05 Gramsamer 22/07/05 a00 04-0130 R ong Fang 05/07/05 While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.
FOR PORTABLE ELECTRIC DRILL 60W010-C02 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 RF_35/12.04/3.0 Application feature The Cable Preparation Tool automates the preparation of corrugated coaxial cables. All preparation dimensions are controlled by the tools: no measuring required. Connector Order No.: 53S115-C02N1, 53K115-C02N1, 53S215-C02N1 60S115-C02N1, 60K115-C02N1, 60S215-C02N1 Important Tool Tips and Instructions 1. Always wear safety glasses and PROTECTIVE GLOVES and don’t insert the finger into the tool. 2. To cut the cable use a hacksaw or use cable cutters in a rocking motion to maintain the cylindrical shape of the cable. 3. Ensure that at least 20 cm (8”) of the cable is straight before using the tool. 4. The use of a cordless drill is recommended (3/8” 14.4V minimum / 1/2"18V recommended), operate the drill in the 400-650 rpm range. 5. We recommended practicing this procedure on scrap cable to get the feel for the process of the cable preparation and the dimensions. 6. Insert the tool on the cable and operate the drill in a fluid clockwise direction with slight forward pressure. 7. As the inner conductor reaches the bottom of the tool, you will feel resistance and the cutting will go slower. Keep the tool running a few extra turns to chamfer the inner conductor. This will ensure a clean and uniform preparation. 8. Periodically mist the blades with WD-40 or similar lubricant and clean the tool body. This will increase blades life significantly. 9. Follow additional instructions that are provided with each connector.