60S101-K050 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
7-16 Airline Plug / Jack 60S101-K050 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 61169-4, EN 122190, DIN 47223 Documents Material and plating Connector parts Material Plating Center conductor plug side Brass Gold, min. 1.27 µm , over nickel Center conductor plug side CuBe Gold, min. 1.27 µm, over nickel Outer conductor Brass Gold, min. 1.27 µm, over nick el Coupling nut Stainless steel Passivated Gasket NBR
7-16 Airline Plug / Jack 60S101-K050 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Electrical data Insertion loss ≤ 0.05 dB at 8 GHz Mechanical data Mating cycles ≥ 500 Maximum torque 35 Nm Recommended torque 2.26 Nm Airline dimensions at 23 °C: - Diameter outer conductor 16.060 mm ± 0.010 mm - Diameter inner conductor 6.975 mm ± 0.005 mm - Length outer conductor 50.00 mm + 0.02 mm - Length inner conductor 49.98 mm - 0.02 mm - Length difference ≤ 0.06 mm (outer conductor – inner conductor) Calculated data (non warranted) Lossless characteristic impedance 1 50 Ω ± 0.10 Ω Return loss 2 ≥ 45 dB, 0.2 GHz to 4 GHz ≥ 40 dB, 4 GHz to 8 GHz 1. The lossless characteristic impedance is calculated from the specified diameters of the inner and outer conductor. 2. The return loss is calculated from the characteristic impedance, the skin depth and the connector interface. General standard definitions For proper work the vector network analyzer (VNA) used needs a model describing the electrical behaviour of this calibration standard. Depending on the VNA type different models, units and terms are used and have to be entered into the VNA. All values are based on typical geometry and plating. - Offset Z o / Impedance / Z o 50 Ω - Offset Delay 166.870 ps - Length (electrical) / Offset Length 50.026 mm - Offset Loss 0.80 G Ω/s - Loss 0.0116 dB/ GHz Environmental data Operating temperature range 3 +20 °C to +26 °C Storage temperature range 0 °C to +50 °C RoHS compliant 3. This range is a recommendation. However, the airline can be used in a wider range. Any temperature change from 23 °C results in dimensional changes.
7-16 Airline Plug / Jack 60S101-K050 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Declaration of calibration options Factory Calibration Standard delivery for this calibration standard includes a Factory Calibration. The Calibration Certificate issued reports individual mechanical calibration results, traceable to national / international standards. Model based standard definitions are reported in an Agilent/Keysight, Rohde & Schwarz and Anritsu compatible VNA format. Accredited Calibration Not available. For further, more detailed information see application note AN001 on the Rosenberger homepage. Calibration interval Recommendation 12 months Packing Standard 1 pce in box Weight 142.8 g/pce Center conductor loose in an acrylic glass tube Draft Date Approved Date Rev. Engineering change n umber Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.