60EPU04 IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

Ultrafast Soft Recovery Diode VR Cathode to Anode Voltage 400 V IF(AV) Continuous Forward Current, TC = 127°C 60 A IFSM Single Pulse Forward Current, TC = 25°C 600 IFRM ! Maximum Repetitive Forward Current 120 TJ, TSTG Operating Junction and Storage Temperatures - 55 to 175 °C Parameters Max Units

  • Ultrafast Recovery
  • 175°C Operating Junction Temperature Benefits
  • Reduced RFI and EMI
  • Higher Frequency Operation
  • Reduced Snubbing
  • Reduced Parts Count These diodes are optimized to reduce losses and EMI/ RFI in high frequency power conditioning systems. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for HF welding, power converters and other applications where switching losses are not significant portion of the total losses. !"Square Wave, 20kHz www.irf.com Case Styles TO-247AC (Modified) 60EPU04 60APU04 TO-247AC CATHODE ANODE CATHODE TO BASE ANODE ANODE CATHODE TO BASE

Bulletin PD-20745 rev. D 07/01 2 www.irf.com VBR, Vr Breakdown Voltage, 400 - - V I R = 100µA Blocking Voltage VF Forward Voltage - 1.05 1.25 V I F = 60A - 0.87 1.03 V I F = 60A, TJ = 175°C - 0.93 1.10 V I F = 60A, TJ = 125°C IR Reverse Leakage Current - - 50 µA V R = VR Rated --2 m A T J = 150°C, VR = VR Rated CT Junction Capacitance - 50 - pF V R = 400V LS Series Inductance - 3.5 - nH Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions trr Reverse Recovery Time - 50 60 ns I F = 1A, diF/dt = 200A/µs, VR = 30V -8 5- T J = 25°C - 145 - T J = 125°C IRRM Peak Recovery Current - 8.8 - A T J = 25°C - 15.4 - T J = 125°C Qrr Reverse Recovery Charge - 375 - nC T J = 25°C - 1120 - T J = 125°C Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) IF = 60A VR = 200V diF /dt = 200A/µs Parameters Min Typ Max Units Test Conditions Parameters Min Typ Max Units RthJC Thermal Resistance, Junction to Case 0.70 K/W RthCS # Thermal Resistance, Case to Heatsink 0.2 Wt Weight 5.5 g 0.2 (oz) T Mounting Torque 1.2 2.4 N * m 10 20 lbf.in Thermal - Mechanical Characteristics #"Mounting Surface, Flat, Smooth and Greased Measured lead to lead 5mm from package body

Bulletin PD-20745 rev. D 07/01 60EPU04/ 60APU04 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Forward Voltage Drop - VFM (V) Instantaneous Forward Current - I F (A) Reverse Voltage - VR (V) Reverse Voltage - VR (V) Junction Capacitance - C T ( p F ) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics t1, Rectangular Pulse Duration (Seconds) Thermal Impedance Z thJC (°C/W) Reverse Current - I R (µA) 0.001 0.01 0.1 100 1000 0 100 200 300 400 25˚C T = 175˚CJ 125˚C 100 1000 1 10 100 1000 T = 25˚CJ 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 100 1000 0 0.5 1 1.5 2 2.5 T = 175˚C T = 125˚C T = 25˚C J J J

Bulletin PD-20745 rev. D 07/01 4 www.irf.com Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR Average Power Loss ( Watts ) trr ( ns ) Qrr ( nC ) Average Forward Current - IF(AV) (A) Allowable Case Temperature (°C) Average Forward Current - IF(AV) (A) di F /dt (A/µs )di F /dt (A/µs ) Fig. 8 - Typical Stored Charge vs. di F /dtFig. 7 - Typical Reverse Recovery time vs. di F /dt 100 0 2 04 06 08 0 1 0 0 DC RMS Limit D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 100 120 140 160 180 0 2 04 06 08 0 1 0 0 DC Square wave (D = 0.50) 80% Rated Vr applied see note (3) 100 120 140 160 180 200 100 1000 Vr = 400V Tj = 125˚C Tj = 25˚C IF = 120A IF = 60A IF = 40A 500 1000 1500 2000 2500 3000 3500 100 1000 Vr = 400V Tj = 125˚C Tj = 25˚C IF = 120A IF = 60A IF = 40A

Bulletin PD-20745 rev. D 07/01 60EPU04/ 60APU04 www.irf.com Fig. 10 - Reverse Recovery Waveform and Definitions IRFP250 D.U.T. L = 70µH V = 200VR 0.01 Ω G D S dif/dt ADJUST ta tb trr Qrr IF IRRM I RRM0.5 di(rec)M/dt

0.75 IRRM

Fig. 9- Reverse Recovery Parameter Test Circuit Reverse Recovery Circuit di F /dt di F /dt 4. Qrr - Area under curve defined by t rr and IRRM 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Q rr = t rr x I RRM

Bulletin PD-20745 rev. D 07/01 6 www.irf.com Conforms to JEDEC Outline TO-247AC (Modified) Dimensions in millimeters and (inches) Outline Table Conforms to JEDEC Outline TO-247AC Dimensions in millimeters and (inches) 60EPU04 2 pins 60APU04 3 pins 15.90 (0.626) 15.30 (0.602) 14.20 (0.559) 14.80 (0.583) 3.70 (0.145) 4.30 (0.170) 5.30 (0.208) 5.70 (0.225) 5.50 (0.217) 4.50 (0.177) (2 PLCS.) 3.55 (0.139) 3.65 (0.144) 2.20 (0.087) MAX. 1.00 (0.039) 1.40 (0.056) 3.20 (0.126) MAX. 0.40 (0.213) 0.80 (0.032) 4.70 (0.185) 5.30 (0.209) 1.5 (0.059) 2.5 (0.098) 2.40 (0.095) MAX. 5.43 (0.213) 5.47 (0.216) 20.30 (0.800) 19.70 (0.775) 1 2 3 DIA. 15.90 (0.626) 15.30 (0.602) 14.20 (0.559) 14.80 (0.583) 3.70 (0.145) 4.30 (0.170) 5.30 (0.208) 5.70 (0.225) 5.50 (0.217) 4.50 (0.177) (2 PLCS.) 3.55 (0.139) 3.65 (0.144) 2.20 (0.087) MAX. 1.00 (0.039) 1.40 (0.056) 0.40 (0.213) 0.80 (0.032) 4.70 (0.185) 5.30 (0.209) 1.5 (0.059) 2.5 (0.098) 2.40 (0.095) MAX. 10.86 (0.427) 10.94 (0.430) 20.30 (0.800) 19.70 (0.775) 1 3 DIA. CATHODE TO BASE CATHODE ANODE CATHODE TO BASE ANODE ANODE

Bulletin PD-20745 rev. D 07/01 60EPU04/ 60APU04 www.irf.com Ordering Information Table Device Code 1 524 3 1 - Current Rating (60 = 60A) 2 - Single Diode 3 - TO-247AC (Modified) 4 - Ultrafast Recovery 5 - Voltage Rating (04 = 400V)

60 E P U 04

E = 2 pins A = 3 pins IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.