60EPU02 IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

Ultrafast Soft Recovery Diode VR Cathode to Anode Voltage 200 V IF(AV) Continuous Forward Current, TC = 127°C 60 A IFSM Single Pulse Forward Current, TC = 25°C 800 IFRM ! Maximum Repetitive Forward Current 120 TJ, TSTG Operating Junction and Storage Temperatures - 55 to 175 °C Parameters Max Units

  • Ultrafast Recovery
  • 175°C Operating Junction Temperature Benefits
  • Reduced RFI and EMI
  • Higher Frequency Operation
  • Reduced Snubbing
  • Reduced Parts Count These diodes are optimized to reduce losses and EMI/ RFI in high frequency power conditioning systems. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for HF welding, power converters and other applications where switching losses are not significant portion of the total losses. !"Square Wave, 20kHz TO-247AC (Modified) 60EPU02 60APU02 TO-247AC www.irf.com ANODE ANODE BASE COMMON CATHODE 31ANODE BASE COMMON CATHODE C ATHODE

Bulletin PD-20739 rev. C 05/01 2 www.irf.com Parameters Min Typ Max Units RthJC Thermal Resistance, Junction to Case 0.70 K/W RthCS # Thermal Resistance, Case to Heatsink 0.2 Wt Weight 5.5 g 0.2 (oz) T Mounting Torque 1.2 N*m VBR, Vr Breakdown Voltage, 200 - - V I R = 100µA Blocking Voltage VF Forward Voltage - 0.98 1.08 V I F = 60A - 0.81 0.88 V I F = 60A, TJ = 175°C IR Reverse Leakage Current - - 50 µA V R = VR Rated --2 m A T J = 150°C, VR = VR Rated CT Junction Capacitance - 87 - pF V R = 200V LS Series Inductance - 8.0 - nH Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions trr Reverse Recovery Time - - 35 ns I F = 1.0A, diF/dt = 200A/µs, VR = 30V -2 8- T J = 25°C -5 0- T J = 125°C IRRM Peak Recovery Current - 4 - A T J = 25°C -8- T J = 125°C Qrr Reverse Recovery Charge - 59 - nC T J = 25°C - 220 - T J = 125°C Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) IF = 60A VR = 160V diF /dt = 200A/µs Parameters Min Typ Max Units Test Conditions Thermal - Mechanical Characteristics #"Mounting Surface, Flat, Smooth and Greased Measured lead to lead 5mm from package body

Bulletin PD-20739 rev. C 05/01 60EPU02/ 60APU02 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Forward Voltage Drop - VFM (V) Instantaneous Forward Current - I F (A) Reverse Voltage - VR (V) Reverse Voltage - VR (V) Junction Capacitance - C T ( p F ) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics t1, Rectangular Pulse Duration (Seconds) Thermal Impedance Z thJC (°C/W) Reverse Current - I R (µA) 0.001 0.01 0.1 100 1000 0 50 100 150 200 125˚C 25˚C T = 175˚CJ 100 1000 10000 1 10 100 1000 T = 25˚CJ 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 100 1000 0 0.5 1 1.5 2 2.5 T = 175˚C T = 125˚C T = 25˚C J J J

Bulletin PD-20739 rev. C 05/01 4 www.irf.com Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR Average Power Loss ( Watts ) trr ( ns ) Qrr ( nC ) Average Forward Current - IF(AV) (A) Allowable Case Temperature (°C) Average Forward Current - IF(AV) (A) di F /dt (A/µs )di F /dt (A/µs ) Fig. 8 - Typical Stored Charge vs. di F /dtFig. 7 - Typical Reverse Recovery time vs. di F /dt 100 110 120 130 140 150 160 170 180 0 2 04 06 08 0 1 0 0 DC Square wave (D = 0.50) 80% Rated Vr applied see note (3) 100 1000 Vr = 160V Tj = 125˚C Tj = 25˚C IF = 90A IF = 60A IF = 30A 100 200 300 400 500 600 700 800 100 1000 IF = 90A IF = 60A IF = 30A Vr = 160V Tj = 125˚C Tj = 25˚C 100 0 2 04 06 08 0 1 0 0 DC RMS Limit D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50

Bulletin PD-20739 rev. C 05/01 60EPU02/ 60APU02 www.irf.com Fig. 10 - Reverse Recovery Waveform and Definitions IRFP250 D.U.T. L = 70µH V = 200VR 0.01 Ω G D S dif/dt ADJUST ta tb trr Qrr IF IRRM I RRM0.5 di(rec)M/dt

0.75 IRRM

Fig. 9- Reverse Recovery Parameter Test Circuit Reverse Recovery Circuit di F /dt di F /dt 4. Qrr - Area under curve defined by t rr and IRRM 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Q rr = t rr x I RRM

Bulletin PD-20739 rev. C 05/01 6 www.irf.com Conforms to JEDEC Outline TO-247AC (Modified) Dimensions in millimeters and (inches) Outline Table Conforms to JEDEC Outline TO-247AC Dimensions in millimeters and (inches) Outline Table 15.90 (0.626) 15.30 (0.602) 14.20 (0.559) 14.80 (0.583) 3.70 (0.145) 4.30 (0.170) 5.30 (0.208) 5.70 (0.225) 5.50 (0.217) 4.50 (0.177) (2 PLCS.) 3.55 (0.139) 3.65 (0.144) 2.20 (0.087) MAX. 1.00 (0.039) 1.40 (0.056) 3.20 (0.126) MAX. 0.40 (0.213) 0.80 (0.032) 4.70 (0.185) 5.30 (0.209) 1.5 (0.059) 2.5 (0.098) 2.40 (0.095) MAX. 5.43 (0.213) 5.47 (0.216) 20.30 (0.800) 19.70 (0.775) 1 2 3 DIA. 15.90 (0.626) 15.30 (0.602) 14.20 (0.559) 14.80 (0.583) 3.70 (0.145) 4.30 (0.170) 5.30 (0.208) 5.70 (0.225) 5.50 (0.217) 4.50 (0.177) (2 PLCS.) 3.55 (0.139) 3.65 (0.144) 2.20 (0.087) MAX. 1.00 (0.039) 1.40 (0.056) 0.40 (0.213) 0.80 (0.032) 4.70 (0.185) 5.30 (0.209) 1.5 (0.059) 2.5 (0.098) 2.40 (0.095) MAX. 10.86 (0.427) 10.94 (0.430) 20.30 (0.800) 19.70 (0.775) 1 3 DIA. 60EPU02 2 pins 60APU02 3 pins ANODE BASE COMMON CATHODE C ATHODE ANODE ANODE BASE COMMON CATHODE

Bulletin PD-20739 rev. C 05/01 60EPU02/ 60APU02 www.irf.com Ordering Information Table Device Code 1 52 43 1 - Current Rating (60 = 60A) 2 - Single Diode: E = Single Diode A = Single Diode (3 pins) 3 - TO-247AC (Modified) 4 - Ultrafast Recovery 5 - Voltage Rating (02 = 200V)

60 E P U 02

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.