60CP SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

Description

Applications

  • Enhanced accuracy over wide operating range
  • Housing options are compatible with most media
  • EMC protection to 100 V/m
  • Broad operating temperature range (-40°C to 135°C)
  • Exceptional shake and vibration tolerance
  • Overvoltage and reverse polarity protection
  • Small size and simple installation The 60CP series pressure sensors are ideally suited for environmentally demanding industrial applications. Using a 5.0 V excitation input, the 60 series sensors provides a .5-4.5 V signal ratiometric output proportional to pressure. This design requires no end user amplification. Several housing options are available. Sensata Technologies has been a leading global supplier of pressure sensors and switches for over 50 years.
  • Compressors & pumps
  • Hydraulics & pneumatics
  • Agriculture & construction equipment
  • Transportation & off-road vehicles
  • Engine controls & monitors
  • Alternative energy management
  • Load management
  • Process control & automation
  • Medical
  • Military Pressure Ranges 0 to 15, 50, 100, 150, 250, 500 psi 0 to 750 psi Accuracy ±0.8% F.S. (linearity, hysteresis, repeatability and calibration) Static error band @ 25°C, 5.0VDC Total Error Band ±1.0% (-20°C to +85°C) Operating Temperature -40°C to +135°C Storage Temperature -40°C to +150°C Proof Pressure 5X 15 to 75 psi, 3X 100 to 300 psi, 2X 500 psi, 1.5X 750psi

www.sensata.com Page 2 Copyright © 2017 Sensata Technologies Inc. Burst Pressure 1700 psi Cycle Life 15 to 500 psi = 10M F.S. cycles 750 psi = 5M F.S. cycles Random Vibration 11g (50 to 2000 Hz) Mechanical Shock 100g (6 Hz, ½ sine) Drop (any Axis) 1.5m Supply Voltage 4.5 to 5.5 VDC Output Voltage 0.5 to 4.5 VDC Supply Current 7 mA (max @ 5.5 VDC no load) Output Current 2.5 mA (max sinked or source) Output Load 2K ohms minimum Output Response Time 10mS max Overvoltage Protection 16.5 VDC Reverse Voltage -14 VDC Short Circuit Protected Yes EMC (1MHz to 512 MHz) 100 V/m ESD (CDF-AEC-Q100-002) 15 kV Dimensions in mm [Inch] DIMENSIONAL DRAWINGS (61CP02 & 67CP03) 2.20 [55.88] MAX GROUND SUPPLY VOLTAGE OUTPUT TERMINAL 1/8-27 NPTF-2A THREAD 11/16” [17.5 mm] ACROSS FLATS 1/4-18 NPTF-2A THREAD 11/16” [17.5 mm] ACROSS FLATS INCHES [MM] 1.79 [45.47] MAX 1.40 [35.56] MAX 2.600 [66.04] MAX 1.13 [28.7] MAX 0.625 [15.88] MAX AGENCY APPROVALS & CERTIFICATES Reach Available

www.sensata.com Page 3 Copyright © 2017 Sensata Technologies Inc. ORDERING OPTIONS Example : 61CP 02 2 0100 G F NA0 C Stainless Steel, 1/8” NPTF-2A Male, Packard Metri-Pack™, Vented Gage, Flourosilicone, 4 to 20 mA, Required for Air and Water Application Pressure Range Pressure Connection Electrical Connection Pressure Ranges Pressure Reference Seal Material Mating Connector / Wire Lead / Wire Length Electrical Enhancement 61CP = Stainless Steel 63CP = Plate Steel 67CP = Brass 02 = 1/8” NPTF-2A Male 03 = 1/4” NPTF-2A Male 2 = Packard Metri-Pack™ From 0-15 psi (0015) to 0-750 psi (0750) From 0-1 bar (M001) to 0-50 bar (M050) A = Absolute S = Sealed gage G = Vented gage B = Nitrile (BUNA-N, NBR) E = Ethylene Propylene F = Flourosilicone H = HNBR (Hydrogenated Nitrile) N = Neoprene V = Viton™ Mating Connector N = None Y = Required Wire Lead A = None B = Std wire¹ F = UL1015, 105°C rated wire² 1. Black, Red, Green 2. Black, Red, Blue Wire Length 0 = None 1 = 1 Meter 2 = 2 Meter = None C = Required for Air and Water Applications 61CP 02 2 0100 G F CNA0 Seal Compatibility Guide Seal Material Media Compatibility Max Seal Temperature Range Nitrile (BUNA-N, NBR) Petroleum oils, lubricants, detergent solutions, helium -20°C to 100°C HNBR (Hydrogenated Nitrile) Petroleum oils, lubricants, detergent solutions -20°C to +135°C Ethylene Propylene Steam, soaps, polar solvents, brake fuilds, acetone, Skydrol™ -40°C to +135°C Seal Material Media Compatibility Max Seal Temperature Range Fluorosilicone Chlorinated solvents, oils, fuels, air -40°C to +135°C Neoprene Refrigerants (freons/ammonia) -40°C to +120°C Fluorocarbon (Viton™) Fertilizers, freons, butanes, oils, trichlorethylene -35°C to +135°C

www.sensata.comCopyright © 2017 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. CONTACT US Revised 12/15/17 Americas +1 (800) 350 2727 sensors@sensata.com switches@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 pressure-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808