606-NF 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
September, 2010 3M™ Weatherban™ Acrylic Sealant 606-NF Product Description 3M™ Weatherban™ Acrylic Sealant 606-NF is an excellent, synthetic, multipurpose, water-dispersed sealant. A multi-purpose product ideal for many interior and exterior sealing applications. Can be applied with most conventional caulking guns or pressurized ow equipment. Seals many metal, wood, painted or primed surfaces, and certain abraded plastics. Product Features
3M™ Weatherban™ Acrylic Sealant 606-NF Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Uncured Physical Properties Property Values Notes Color White Colors may vary from nearly white to yellow/amber. Adhesive performance is not aected by color variation. Base Synthetic Elastomer (acrylic) Net Weight 12.3 to 13.6 lb/gal Consistency Pumpable Paste Typical Performance Characteristics Elongation Test Condition Notes Dwell/Cure Time 160 % Room Temperature Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 175 % 120°F (49°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 165 % 140°F (60°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 150 % 160°F (71°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 130 % 200°F (93°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 110 % 250°F (121°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 175 % Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 7 days @ 180°F (82°C) 150 % Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 14 days @ 180°F (82°C) 175 % Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 30 days @ 180°F (82°C) 150 % Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 60 days @ 180°F (82°C) Property: Elongation
3M™ Weatherban™ Acrylic Sealant 606-NF Typical Performance Characteristics (continued) 180° Peel Adhesion Substrate Failure mode
10.5 N/cm 96 oz/in Glass Cohesive
8.8 N/cm 80 oz/in Aluminum Cohesive
10.5 N/cm 96 oz/in Anodized Aluminum Cohesive
14 N/cm 128 oz/in Cold Rolled Steel Cohesive
8.8 N/cm 80 oz/in Galvanized Steel 80% Adhesive
14 N/cm 128 oz/in Stainless Steel Cohesive
10.5 N/cm 96 oz/in Concrete Cohesive
12.3 N/cm 112 oz/in Ceramic Tile - Glass Surfaces Cohesive
14 N/cm 128 oz/in Ceramic Tile - Porous Surfaces Cohesive
12.3 N/cm 112 oz/in Rigid Vinyl Cohesive
10.5 N/cm 96 oz/in Marine Fiberglass Cohesive
14 N/cm 128 oz/in Oak Cohesive
8.8 N/cm 80 oz/in Fir Plywood 80% Wood Failure
1.8 N/cm 16 oz/in Baked Enamel Adhesive
Table continued on next page TemperatureResistance Test Condition Notes Dwell/Cure Time 15.1 kg/cm² 215 lb/in² Room Temperature Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 9.49 kg/cm² 135 lb/in² 120°F (49°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 10.2 kg/cm² 145 lb/in² 140°F (60°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 9.12 kg/cm² 130 lb/in² 160°F (71°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 9.12 kg/cm² 130 lb/in² 200°F (93°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester. 7.73 kg/cm² 110 lb/in² 250°F (121°C) Free cured lms gave the following properties when pulled at dierent temperatures using an Instron tensile tester.
3M™ Weatherban™ Acrylic Sealant 606-NF Typical Performance Characteristics (continued) TemperatureResistance Test Condition Notes Dwell/Cure Time 16.2 kg/cm² 230 lb/in² Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 7 days @ 180°F (82°C) 16.5 kg/cm² 235 lb/in² Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 14 days @ 180°F (82°C) 16.9 kg/cm² 240 lb/in² Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 30 days @ 180°F (82°C) 17.2 kg/cm² 245 lb/in² Room Temperature Similar lms were aged at 180°F (82°C) and then tested at 75°F (24°C). Aged 60 days @ 180°F (82°C) Property: Temperature Resistance Property Values Temperature Use Range note Retains its exibility at temperatures as low as -28°F (-33°C) and up to 180°F (82°C). Weld-Through Properties Can be successfully spot welded through if the spot welder is of the type that has an electrode on either side of the joint being joined. Typical Physical Properties Property Values Notes Solids Content by Weight Water % Flash Point None °C None °F Weather Resistance Large beads of 3M™ Weatherban™ Acrylic Sealant 606-NF were aged on automotive steel panels for 1000 hours in a Sunshine Arc Weatherometer and for two years of outdoor weathering in Florida with only slight surface yellowing observed. Caulk Rate 2000 g/min Extrustion Test – 1/4 in. diam. orice @ 25 psi
3M™ Weatherban™ Acrylic Sealant 606-NF Handling/Application Information Dispensing Equipment Directions for Use Storage and Shelf Life Trademarks 3M, Weatherban and Scotch-Grip are trademarks of 3M Company. References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Weatherban-Acrylic-Sealant-606NF?N=5002385+3293242078&rt=rud Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=606-NF
3M™ Weatherban™ Acrylic Sealant 606-NF ISO Statement Precautionary Information Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501. Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.